Technology Service Excellence. Training Overview

Transcription

1 Technology Service Excellence Training Overview

2 Background information Overview In an ever -growing economy; power, electricity, telecommunications, construction and transport is the future. TIS provides the products and solutions to take you there. TIS offers complete turnkey solutions to the manufacturing and delivery of world -class products, services, expertise and training to address diverse needs for electrical and power equipment in South Africa and beyond. Technology Integrated Solutions (TIS) was part of Powertech SA (Pty) Ltd. Powertech is a subsidiary of Altron Limited, a JSE listed company. Established in 1960, TIS has seven branches in South Africa; Cape Town, Pinetown, Port Elizabeth, Bloemfontein, Middleburg, Klerksdorp and our head office in Midrand, Johannesburg. TIS is the largest distributor of TE Connectivity and Commscope products in the Southern African region. TIS is a 100% black owned and 48% women owned. Mission and vision Our vision is to focus on our core building blocks of technology, service and excellence. We aim to be the key player in the market for product manufacture in power and telecommunications in South Africa, and beyond its borders. Our mission is to build sustainable relationships with our customers, by providing outstanding service, superior quality products and skilled staff for diverse solutions. We do this by integrating a broad level of expertise, worldclass products and training. E LECTRICAL TRAINING SOLUTIONS TIS INVEST Training is an EWSETA accredited training centre. TIS is at the forefront of providing training in the use of TIS jointing & terminating products. Training can be provided at our training centre or at the client s premises. The training starts with a theory session and then delegates proceed to practical. Both theory and practical will be assessed before the delegate is certified as competent. The experience of highly skilled trainers makes this training department an indispensable service to clients. This department specialises in training engineers, technicians, electricians and cable jointers and splicers.

3

4 VALUE ADDED SERVICE TIS is an EWSETA accredited training centre All training is based on National & International standards and specifications TIS has the latest, state of the art equipment to perform training TIS is constantly researching the latest technologies, techniques and methods to ensure clients are provided with up to date information and training TIS strives for excellence and only uses the latest specification on all work BENEFITS OF TRAINING Accredited Energy SETA skills development. Accredited training done to Eskom and other utilities specifications. Training is done to SA National Standards (SANS) 10198/10&11 and NRS 053/ SANS 1332 Certification on successful completion & assessment. Students are assessed individually by registered assessor The assessments are moderated by registered and accredited moderators. Course details available from: (011) or TRAINING COURSES No Course Title Cores Dura on 1 2 FUNDEMENTALS OF ELECTRCITY/BASIC ELECTRICAL OCCUPATIONAL HEALTH AND SAFETY(OHS) days 5 days 3 TESTING INSTRUMENTS-THEORETICAL AND PRACTICAL - 2 days 4 MV XLPE & PILC CABLES INSTALL, JOINT & TERMINATE 1 or 3 5 days 5 MV XLPE CABLE JOINTING & TERMINATING 1 or 3 3 days 6 MV AERIAL BUNDLED CONDUCTOR JOINT & TERMINATE 1 or 3 2 days 7 AMPACT - 1 day 8 LOW VOLTAGE CABLES 1 or 3 3 days 9 OPERATING REGULATIONS FOR HV SYSTEMS FOR AUTHORISED PERSONS 10 OPERATING REGULATIONS FOR HV SYSTEMS FOR RESPONSABLE PERSONS days 3 days 11 CABLE FAULT LOCATION - 3 days SCREENED CONNECTORS (RSTI) ABC INSTALLATION 1 or 3-1 day 5 days

5 COURSE OUTLINE 1. FUNDEMENTALS OF ELECTRICITY/BASIC ELECTRICITY The course is designed to prepare students with entry level knowledge and manipulative skills for employment in the electrical industry. Electrical Fundamentals & Basic Electricity teaches students everything they need to know about how electricity behaves. Starting from the basic scientific principles, it covers the following topics and related skills: Explain Principles and fundamental concepts of electricity Explain Magnetic Theory. Know definitions, types, properties and applications of conductors, insulators and semi -conductors Explain the basic fundamentals of power generation and distribution. Apply and Explain electrical units and symbols. Explain Concepts, theories and principles of Electrical Circuits Draw and interpret series, parallel and series parallel DC resistive circuits and calculate variables. Perform calculations on basic electrical circuits (resistance, voltage and current) and power LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING The following knowledge, skills attitude and or equivalent: Communication, science, literacy and mathematical skills at NQF Level 1. Introduction to industry (work environment). Duration 3 days 2. OCCUPATIONAL HEALTH AND SAFETY (OHS) Occupational health and safety officers are responsible for putting health and safety systems in place in a work environment. This programme is suitable for those who would like to take on the role of occupational health and safety in the work place and learn how to create a proper healthy and safe environment for workers and prevent serious injuries in the work place. The course is theoretical and covers the following: Legislation and Regulations for workplace safety within electricity Occu pation Health and Safety Legislation Safety Precautions and safe practices for working within industry Personal Protective Equipment Safety symbols and colour coding Fundamentals of isolating and locking out equipment and circuits

6 Fundamentals of Securing Worksites Protection Devices Causes, Prevention and Control of fires Hazard Identification and Risk Principles Environmental, Protection and Pollution Concepts Basic First Aid Incident Reporting Evacuation Procedures. Duration 5 days 3. TESTING INSTRUMENTS-THEORETICAL AND PRACTICAL The Electrical testing instruments course covers the principles on which electrical test instruments operate. Basic instruments covered in this course include insulation resistance tester (ohmmeter) and multimeter, tong tester, voltage tester(duspol): Demonstrate knowledge of test instruments. Set up electronic instruments. Demonstrate knowledge of measuring techniques. Interpret the results of the readings. Duration: 2 days 4. MV XLPE & PILC CABLES INSTALL, JOINT AND TERMINATE The Cable Jointing and Termination Course is both theoretical and practical. The course will concentrate on the technical data as well as practical aspects of installing, jointing and terminating medium voltage cables. This Cable Jointing and Termination Course will cover the fundamental aspects involved in the correct execution of a termination or joint. Topics such as cable construction, crosslinking, stress control and practical ways in removing semiconductors, Installing, jointing and terminating cables will be brought home and provide you with the applied competence according to the following unit standards: Unit standard Install and Terminate Medium Voltage Cables (NQF Level 4) Unit standard Joint Medium Voltage Cables (NQF Level 4) All work is carried out according to Occupational Health and Safety Act. Training is based on requirements of SANS and material used meets requirements of NRS 053 / SANS 1332 Assessments are done according to EWSETA and SAQA requirements.

7 PRE - REQUISITES Knowledge of electrical drawings Knowledge of isolating and safety testing procedures Basic hand tools Understanding of operating regulations. Install, joint and terminate LV cables. Introduction to industry Duration: 5 Days 5. MV XLPE CABLE JOINTING AND TERMINATING This Cable Jointing and Termination Course is both theoretical and practical. The course will concentrate on the technical data as well as practical aspects of installing, jointing and terminating XLPE medium voltage cables. This Cable Jointing and Termination Course will cover the fundamental aspects involved in the correct execution of a termination or joint. Topics such as cable construction, cross - linking, stress control and practical ways in removing semiconductors, Installing, jointing and terminating cables will be brought home and provide you with the applied competence according to the following unit standards: Unit standard Install and Terminate Medium Voltage Cables (NQF Level 4) Unit standard Joint Medium Voltage Cables (NQF Level 4) All work is carried out according to Occupational Health and Safety Act. Training is based on requirements of SANS and material used meets requirements of NRS 053 / SANS 1332 PRE - REQUISITES Knowledge of electrical drawings Knowledge of isolating and safety testing procedures Basic hand tools Understanding of operating regulations. Install, joint and terminate LV cables. Introduction to industry Duration: 3 days 6. MV AERIAL BUNDLED CONDUCTOR JOINT AND TERMINATE This Course will cover the fundamental aspects involved in the correct execution of a termination or joint. Topics such as cable construction, cross-linking, stress control and practical ways in removing semiconductors, jointing and terminating cables will be brought home and provide you with the applied competence. All material application is done according to the manufacturer s specifications. Duration: 2 Days

8 7. AMPACT The course covers the following: Ampact tool accessories Tool operation Tap and stirrup installation/removal Tool inspection and maintenance Duration: 1 Day 8. LOW VOLTAGE CABLES This Cable Jointing and Termination Course will cover the fundamental aspects involved in the correct execution of a termination or joint. Topics such as cable construction, Cable basic facts, cross-linking, insulation breakdown, practical ways in removing armouring and PVC and jointing and terminating cables will be brought home and provide you with the applied competence according to the following unit standard: Unit standard : Install, joint and terminate Low Voltage cables and conductors (NQF 2) PRE - REQUISITES Application and construction of wire ways. Use and handling of basic hand tools. Use and handling of portable power tools. Use and knowledge of electrical testing instruments. Introduction to industry. Terminology associated with the tools and materials Duration: 3 Days 9. OPERATING REGULATION FOR HIGH VOLTAGE SYSTEMS FOR AUTHORISED PERSONS The Occupational Health & Safety Act has laid down the broad Rules and Regulatons on how to work safely with High Voltage (any voltage above 1000 volts) but it cannot be Industry Specific as the field is too large to cater for every need. The ORHVS (Operating Regulations for High Voltage Systems) was formulated to be more specific on the rules and regulations for safe work on High Voltage Equipment and Apparatus. Unit standard Demonstrate knowledge and understanding of operating regulations for high voltage systems (NQF Level 5) Assessments are done according to EWSETA and SAQA requirements

9 PRE - REQUISITES Communication at NQF Level 4. Mathematical Literacy at NQF Level 4. Read and writ in English. Introduction to Industry. Introduction to Electricity. Basic Understanding of Occupational Health and Safety Act 85 of Duration: 5 Days 10. OPERATING REGULATION FOR HIGH VOLTAGE SYSTEMS FOR RESPONSABLE PERSONS The Occupational Health & Safety Act has laid down the broad Rules and Regulations on how to work safely with High Voltage (any voltage above 1000 volts) but it cannot be Industry Specific as the field is too large to cater for every need. The ORHVS (Operating Regulations for High Voltage Systems) was formulated to be more specific on the rules and regulations for safe work on High Voltage Equipment and Apparatus. Assessments are done according to EWseta and SAQA requirements. PRE-REQUISITES Communication at NQF Level 4. Mathematical Literacy at NQF Level 4. Read and wright in English. Introduction to Industry. Introduction to Electricity. Basic Understanding of Occupa o al Health and Safety Act 85 of Duration: 3 Days 11. CABLE FAULT LOCATION This course will assist people with finding a fault on an underground cable. There is various different types and models of test equipment available for fault finding on cables. The course will explain the different Test equipment and their functions and where they can be used. How you can benefit from using the different equipment. Unit standard Test, diagnose and locate a fault on a high voltage electrical cable (NQF Level 3) Assessments are done according to EWSETA and SAQA requirements.

10 PRE - REQUISITES Communicate effectively. Use hand held electrical test instruments. Basic hand tools. Understanding of operating regulations. Read and interpret e lectrical drawings. Read and wrigte in English. Introduction to Industry. Introduction to Electricity. Duration: 3 Days Tool list Minimum-Cable Jointing Hammer Screwdriver set(flat and star) Hacksaw Side cutter 160mm Long nose plier Combination plier Measuring tape Cable knife Small round file rough cut 6mm Gas bottle with torch Gas pliers Scoring tool Connector holding tool Socket set Wedge inserting tool PPE Safety shoes Overall(two piece)or as per company requirements Gloves Tel : Fax: info@tis-sa.com 322, Unit 2, 15th Road, Midrand