PRODUCTION LINE 1 PALLET/MINUTE HYDRAULIC NAILING MACHINERY MOD. GSI 150 AL 2 WITH TRANSPORT UNIT, MANUF. STORTI, ITALY, 2007.

Size: px

Start display at page:

Download "PRODUCTION LINE 1 PALLET/MINUTE HYDRAULIC NAILING MACHINERY MOD. GSI 150 AL 2 WITH TRANSPORT UNIT, MANUF. STORTI, ITALY, 2007."

Jocelyn Sharp
5 years ago
Views:

Height of pallets 180 mm Nail size 35/100 Hydraulic unit engine 9.2 kw Transport unit engine 1.

1 PRODUCTION LINE 1 PALLET/MINUTE HYDRAULIC NAILING MACHINERY MOD. GSI 150 AL 2 WITH TRANSPORT UNIT, MANUF. STORTI, ITALY, feeders, 12 nails each = 24 nails 24 захвата с механическим закрытием; Set includes: Max. length of pallets 1500 mm Max. width of pallets 1500 mm Max. Height of pallets 180 mm Nail size 35/100 Hydraulic unit engine 9.2 kw Transport unit engine 1.5 kw Machinery volume 260 liters Technical characteristics: Description electric steel construction, that provides reliability and stability The electric steel trolley with cover from the bottom ensures quiet and accurate positioning when installing nails; The movement of electric steel trolley is by mean of two gear wheels and Rack and Pinion mechanism; Traction gear motor powered by a frequency converter that allows easy adjustment of the rate filing carts, and acceleration and braking; Electrically tempered steel crossbar for driving nails, having a high strength and durability of a system of balancing shaft, gear wheels and Rack and Pinion mechanism, which ensures perfect alignment on the working plane

crossbar moves on the iron rails with a pump; Clips durable, made from hardened steel; Rear adjustable hooks engage the pallet ready for its removal and subsequent operation of nailing; Control

2 crossbar moves on the iron rails with a pump; Clips durable, made from hardened steel; Rear adjustable hooks engage the pallet ready for its removal and subsequent operation of nailing; Control Systems: unloading cassettes with nails, time control of break and work, the number produced nailing, the combination of nails (the simultaneous use of different types of nails); Protective equipment of operator ensures his safe work; Compliance CE Additional feeder for 12 nails FULL SET OF MACHINERY GSM/3 AL, ITALY For pallets: Max length: 1500 mm Min. 700 mm Max width: 1500 mm Min. 700 mm Max height: 180 mm Min. 60 mm Corner cut: 45 4 corners 4 motors, power: 1.85 kw (2 hp) each. Board milling In six places points 6 motors, power: 1.5 kw (2 hp) each Stamp burning in six points 2 motors with chain gear, power: 0.37 kw (0.5 hp) each. 6 stamps, power: 1.5 kw each. 1 st operation: Corner cut 45 with 4 pneumatic shredders.

composed of: Machine for finishing corners Pallet board chamfering machine Labelling machine For Pallets: Max. Length: 1500 mm Minimum 700 mm Max.

3 2 nd operation: Automatic chamfering with 6 pneumatic engines during pallet passage. 3 rd operation: Marking with 6 lateral installations CORNERS CUTTING MACHINERY CHAMFERING MACHINE AND LABELLING MACHINE «GSM/3 AL», ITALY Combined machine composed of: Machine for finishing corners Pallet board chamfering machine Labelling machine For Pallets: Max. Length: 1500 mm Minimum 700 mm Max. Width: 1500 mm Minimum 700 mm Max. Height: 180 mm Minimum 60 mm Corners cutting machine: 45 4 Corners With 4 motors power kw 1,85 (HP 2,5) each Labelling machine with 6 labels With 2 chains motors power kw 0,37 (HP 0,5) With 6 resistances with 1.6 kw each

AUTOMATIC PALLET PUTTING LINE APL 05 Machinery is intended to be installed to the pallet producing line and represents the final node of line receiving

Pros Work in automatic mode Putting variants: one in one, one on one Fast adjustment of size of pile and number of pallets Technical characteristics

4 AUTOMATIC PALLET PUTTING LINE APL 05 Machinery is intended to be installed to the pallet producing line and represents the final node of line receiving and putting pallets. Pallets are being put automatically in piles, whose sizes are determined by value entered by operator. Pros Work in automatic mode Putting variants: one in one, one on one Fast adjustment of size of pile and number of pallets Technical characteristics Model Lifting capacity Pneumatic system pressure Voltage Power consumption Pallet measurements Height Width Length APL kg 8 10 bar 380 V 6 kw mm mm mm

5 Machinery measurements Revolving unit Putting unit Folded stack releasing unit Height 900 mm 3500 mm 900 mm Width 2000 mm 2400 mm 2000 mm Length 3000 mm 1500 mm 3000 mm Weight 1000 kg 1000 kg 1000 kg

7 We would like to offer you semi automatic pallet making machinery. Year of production This line is able to produce EURO pallets, CP pallets, and various non standard pallets. Productivity of making EURO pallets is around pieces per 8 hours. It is required 2 workers to operate line. Machinery automatically hammers nails, puts stamps, cuts pallets corners and puts them in required order. Machinery can be bought by leasing; in that case monthly payment would be Euros. Total price of machinery is Euros. If you are interested and would like to receive more information, please contact me. Kind regards, Genadijus Jermakovas General Director Tel Fax Mob: info@ramundas.lt skype: geenadijus

WELDING POSITIONING EQUIPMENT. JMT offers quality machine tools for all your sheet metal fabrication needs.

WELDING POSITIONING EQUIPMENT. JMT offers quality machine tools for all your sheet metal fabrication needs. WELDING POSITIONING EQUIPMENT JMT offers quality machine tools for all your sheet metal fabrication needs. JMTUSA.com Email: JMT@JMTUSA.com Toll Free: 855-773-7727 (855-PRESS-BRAKE) JMT sells and services