COIL PROCESSING & SHEARING SYSTEMS

Size: px
Start display at page:

Download "COIL PROCESSING & SHEARING SYSTEMS"

Transcription

1 COIL PROCESSING & SHEARING SYSTEMS

2 GREEN SOLUTIONS REDUCTION OF RAW MATERIAL COST Cost of material in coil is % less than cost of material in blanks REDUCTION OF SCRAP MATERIAL Instead of fixed sized blanks, you can produce any size needed without scrap REDUCTION OF PROCESSING TIME From coil to required blanks with minimum material handling REDUCTION OF MAN POWER No lifting and handling of heavy sheets JUST IN TIME Quick response to customer demand 2

3 COIL SYSTEMS System 1 Decoiling, feeding and cut to length System 2 Decoiling, feeding, slitting and cut to length System 2 RCO Decoiling, feeding, slitting, cut to length and recoiling System 3 Decoiling, straightening, feeding and cut to length System 4 Decoiling, straightening, feeding, slitting and cut to length System 4 RCO Decoiling, straightening, feeding, slitting, cut to length and recoiling System 5 RCO Decoiling, feeding, slitting and recoiling 3

4 COMPACT The CIDAN cut to length line model COMPACT is a fully automatic line and is supplied in a very compact construction for coil widths 1250 mm (49 ) or 1550 mm (61 ). No other manufacturer can beat the quality and accuracy of the cut and slit pieces in a line of this size. With this line, the productivity can be drastically increased by programming different lengths and pieces and the use of material will be optimized with much less scrap. System 3 The COMPACT has a straightening unit with 5 rolls and the cut to length is done by a motorized mechanical shear. The LineLink control system with a color touch screen gives you the possibility to store many programs as well as a library of coils. Decoiling, straightening, feeding and cut to length The COMPACT is prepared and can be fitted with a slitting unit and multiple slitting knives. System 4 Decoiling, straightening, feeding, slitting and cut to length The COMPACT will handle pre-painted sheets and other sensitive materials. As standard, the line is operated from the left side, but can be supplied in right side operation in order to satisfy the individual space requirements. STANDARD FEATURES Straightening unit with 5 straightening rolls (dia meter 70 mm/2,8 ) Position indicator with digital outread Sheet guide for in-feed Guillotine shear with hold down beam Double edged blades Programmable control system (LineLink) with touch screen and multiple languages 2 feeding rolls (1 rubber coated) Mechanical fencing at rear of the machine Control panel on the left side Foot pedal for remote feeding OPTIONS Slitting unit with 1-6 pairs of divided slitting knives (system 4) (p. 8) Device for adding protecting foil on one or two sides of the sheet, with brake (p. 8) Manual or motorized decoilers (p ) Control panel on the right side (seen from the in feed direction) Punching unit (on customer s request) CE-fencing (on customer s request) Cooling package for electrical cabinet (recommended if ambient temperature >35 C) Forced cooling for cutting motor (for repetitive high volume cuts) Pulse activated automatic movement (separate hand control with wire) Model Cutting Width Capacity Speed Motor Weight mm ( ) Steel* Stainless steel** Aluminium*** m/min ft/min kw (hp) shear + feeding kg (lbs) Approx. COMPACT (49) 1.25 (18) 0.75 (24) 1.75 (15) 12 (37) 1.5 (2.0) (1.5) 1500 (3307) COMPACT (61) 1.00 (20) 0.50 (26) 1.50 (16) 12 (37) 1.5 (2.0) (1.5) 1600 (3525) 4 *at 400 N/mm psi -**at 700 N/mm psi - ***at 200 N/mm psi

5 PROFI System 1 The CIDAN cut to length line model PROFI comes in 5 different System 2 Decoiling, feeding and cut to length + RCO systems made for coil widths 1250 mm (49 ) or 1550 mm (61 ). The PROFI is designed with heavy duty side frames for high demanding production. The PROFI can be supplied with a wide range of options in order to fulfill the demands of different customers. Decoiling, feeding, slitting and cut to length Cut to length is done by a heavy duty mechanical shear. System 3 The PROFI will handle pre-painted sheets and other sensitive materials, with the option of having the straightening rolls chromed which also minimizes scratches and marks on the surface. System 2 and 4, can be used together with recoiling. Decoiling, straightening, feeding and cut to length System 4 + RCO System 5 RCO Decoiling, straightening, feeding, slitting and cut to length Decoiling, feeding, slitting and recoiling STANDARD FEATURES Straightening unit with 7 rolls (diameter 110 mm/4.33 ) (systems 3 and 4) Sheet guide for in-feed Guillotine shear with hold down beam and double edged blades 2 feeding rolls (1 rubber coated) Programmable control system (LineLink) with touch screen and multiple languages Control panel on the left side Foot pedal for remote feeding OPTIONS Slitting unit with 1 8 pairs of divided slitting knives (system 4) (p. 8) Device for adding protective foil on one or two sides of the sheet, with brake (p. 8) Hardened rolls for stainless steel applications Chromed rolls for sensitive materials Hardened and chromes rolls - for stainless steel and sensitive materials Control panel on the right side (seen from the in feed direction) Manual or motorized decoilers (p ) Stacking systems (p. 13) Recoiling systems (p ) Punching unit (on customer s request) Scrap rewinder (on customer s request) Cooling package for electrical cabinet (recommended if ambient temperature >35 C) Forced cooling for cutting motor (for repetitive high volume cuts) Pulse activated automatic movement (separate hand control with wire) Model Cutting Width Capacity Speed Motor Weight mm ( ) Steel* Stainless steel** Aluminium*** m/min ft/min kw (hp) shear + feeding kg (lbs) Approx. PROFI (49) 1.75 (15) 1.00 (20) 2.50 (12) 20 (60) 1.5 (2.0)+ 2.2 (3.0) 2500 (5512) PROFI (61) 1.50 (16) 1.00 (20) 2.25 (14) 20 (60) 1.5 (2.0)+ 2.2 (3.0) 2750 (6063) *at 400 N/mm psi -**at 700 N/mm psi - ***at 200 N/mm psi 5

6 TURBO System 3 The CIDAN cut to length line model TURBO comes in 2 different systems, made for coil widths 1250 mm (49 ) or 1550 mm (61 ). The TURBO is designed with 50 mm (2 ) heavy duty side frames for feeding, straightening, slitting (system 4) and cut to length. Decoiling, straightening, feeding and cut to length The rolls are gear driven and the heavy solid rolls and other parts have been dimensioned for high production at maximum capacity. System 4 + RCO The TURBO line has two sets of feeding rolls (one roll in each set is rubber coated) and seven straightening rolls as standard. Decoiling, straightening, feeding, slitting and cut to length The TURBO will handle pre-painted sheets and other sensitive materials with the option of having the straightening rolls chromed which minimizes scratches and marks on the surface. The TURBO system 4 can be used together with recoiling. STANDARD FEATURES Straightening unit with 7 rolls (diameter 110mm/4.33 ) Sheet guide for in-feed Guillotine shear with hold down beam and double edged blades 2 sets of feeding units with each 2 rolls (2 rubber coated) Programmable control system (Line- Link) with touch screen and multiple languages Control panel on the left side Central lubrication Foot pedal for remote feeding OPTIONS Slitting unit with 1 8 pairs of divided slitting knives (p. 8) Device for adding protective foil on one or two sides of the sheet, with brake (p. 8) Hardened rolls for stainless steel applications Chromed rolls for sensitive materials Hardened and chromes rolls - for stainless steel and sensitive materials Control panel on the right side (seen from the in feed direction) Manual or motorized decoilers (p ) Stacking systems (p. 13) Recoiling systems (p ) Scrap rewinder (on customer s request) Cooling package for electrical cabinet (recommended if ambient temperature >35 C) Forced cooling for cutting motor (for repetitive high volume cuts) Pulse activated automatic movement (separate hand control with wire) Model Cutting Width Capacity Speed Motor Weight mm ( ) Steel* Stainless steel** Aluminium*** m/min ft/min kw (hp) shear + feeding kg (lbs) Approx. TURBO (49) 2.25 (14) 1.50 (16) 3.50 (10) 30 (90) 2.2 (3.0) (5.5) 3030 (6680) TURBO (61) 2.00 (14) 1.25 (18) 3.00 (11) 30 (90) 2.2 (3.0) (5.5) 3360 (7410) *at 400 N/mm psi -**at 700 N/mm psi - ***at 200 N/mm psi 6

7 THE SYSTEMS COMPACT PROFI TURBO Feeding rolls Straightening rolls Slitting unit Mechanical shear SLITTING CAPACITY CUTTING LINES 150% 140% 130% 120% 110% 100% 90% 80% 200Nmm 2 400Nmm 2 If trimming coils from 1.25 meters (49 inches) up to 1.5 meter (60 inches), use the capacity on the dashed line. In order to obtain correct sheet thickness information, replace the 100% with steel capacity from desired CTL line. The reduced or increased percentage figures refer to maximum material thickness. Red line = Aluminium Black line = Mild steel Blue line = Stainless steel 70% 60% 700Nmm 2 50% 40% 30% 20% Pairs of slitting blades

8 OPTIONS DEVICE FOR ADDING PROTECTIVE FOIL Device for adding protective foil on top side and / or lower side of the material (order separately). This device is equipped with a brake, in order to adjust the tension and is mainly used for sensitive material. SLITTING UNIT All our lines can be fitted with a slitting unit that consists of upper and lower rolling knives.the unit can be equipped with 1 8 pair of divided slitting knives (1-6 compact). The slitting unit can be activated or deactivated by moving the upper knives up or down via a handle. The divided slitting knives are easily unlocked with an Allen Key. The half-moon key is made of bronze to avoid scratching/marking of the shafts, when sliding and tightening the slitting knives. The slitting unit on PROFI and TURBO is suitable for trim cut. COMPACT PROFI AND TURBO The knives on our slitting units are easily adjusted and they all have two cutting edges to double the lifespan. The knives are made of high quality steel and they are precision grinded and hardened. Tolerance between the shafts and knives are 0.01 mm ( ) which guarantees accurate slitting. MINIMUM SLITTING WIDTHS ON CTL-LINES. COMPACT The minimum slitting width on COMPACT machines is > 100 mm because of the shape and size of the slitting knives. Trimcut is possible in full coil width and the minimum trim cut width will be approx. 25 mm on a COMPACT, because of the shape and size of the slitting knives. COMPACT SLITTING KNIVES PROFI & TURBO SLITTING KNIVES PROFI & TURBO The minimum width we can slit with our PROFI and TURBO machines is > 50 mm, because the slitting knives are in a special shape with a narrow cutting surface. Trimcut is possible in full coil width and the minimum width will be approx. 20 mm if the slitted part has to be cut in the CTL-Line. Smaller trim cuts has to be lead over the CTL shear unit and rewinded on a Unit Called Scrap Rewinder. 8

9 LineLink TOUCH SCREEN CONTROL All our coil processing units are equipped with the LineLink Control that has a 6 color touch screen that is very user friendly. The LineLink has a memory card where all parameters, programs and coils are stored. THE MANUAL OPERATION MODE IS USED FOR: Manual feeding of material in both directions Manual clean cut Choose coil from library Set length for single cut Choose language, metric/imperial and other regional settings THE AUTOMATIC OPERATION MODE IS USED FOR: Writing a program by selection of cutting length and quantity. Each program can have several lengths and quantities in combination. Single or automatic mode Storing of programs in a large memory bank Reverse function for cutting aluminium COIL LIBRARY Storing of different coils (own or customer related). Enter coil width, weight, length, color, quality, thickness etc. per coil. By entering the length of material in a coil, the automatic calculation processor will advise whether a coil has sufficient material for a certain program. BACKUP RESTORE This screen mode is used when doing back up of programs, parameters and coil library on a memory stick. 9

10 MANUAL DECOILERS 1 5 TONS CAPACITY CRADLE STANDARD FEATURES 4 supporting rolls and 2 side rolls Fixture for transportation of pallet jack DO 2-12 STANDARD FEATURES Manual decoiler with single frame and expandable mandrel Brake system, manually adjusted DC 5 STANDARD FEATURES Manual decoiler with expandable mandrel Brake system, manually adjusted Max Coil Weight Coil Width Capacity Max Coil Diameter kg (lbs) mm ( ) Inside mm ( ) Outside mm ( ) Cradle 1000 (2200) 1250 (49) 1.0 (20) DO (4400) 1250 (49) 1.5 (16) (14-25) 850 (33) DC (11000) 1270 (50) 1.5 (16) (14-25) 1100 (43) DC (11000) 1520 (60) 1.5 (16) (14-25) 1100 (43) 10

11 ROTOCOIL ROTOCOIL is a heavy duty motorized decoiler for 5 and 10 tons coils developed for high speed production. The ROTOCOIL communicates with the cut to length / slitting line, to ensure a smooth and fast production. The motor is frequency controlled and the decoiler can reach a maximum speed of 45 meters per minute. The CIDAN model ROTOCOIL decoiler is a unique innovation with an intelligent and clean design, where all the parts are placed inside the machine construction, in order to prevent any damages in heavy industrial environments. The hydraulic mandrel has four support plates to maintain a perfect round coil shape during expansion. The mandrel is equipped with hydraulic wedges to keep the coil tight to the mandrel during the whole decoiling process. The optical loop control sensor measures the distance from floor to the loop and makes sure the decoiler will start and stop decoiling smoothly. STANDARD FEATURES Optical loop control Wireless remote control CIDAN CTL with LineLink control Hydraulic expansion of the mandrel Frequency converter to control the speed Pneumatic pressure arm OPTIONS Coil wagon Coil adapter for larger inner diameter Rotocoil as standalone unit together with CTL-Line without LineLink control CE fencing on customers request Model Coil Weight Max Coil Width Capacity Max Speed Motor Coil Diameter kg (lbs) mm ( ) m/min (ft/min) kw (hp) Inside mm ( ) Outside mm ( ) max ROTOCOIL (11000) 1550 (61) 2.5 (12) 45 (150) 3.0 (4) (17,3-21,3) 1300 (51) ROTOCOIL (22000) 1550 (61) 2.5 (12) 45 (150) 7.5 (10) (18,9-22,8) 1500 (59) Included coil wagon CW5 or CW10 11

12 ROTOCOIL WIRELESS REMOTE CONTROL The wireless remote control is a unique solution to avoid cables and gives flexibility especially when changing and mounting coils. This unit controls the following movements: Coil wagon vertical movement (CW option) Coil wagon horizontal movement (CW option) Mandrel expansion Mandrel rotation Pressure arm PRESSURE ARM When working with heavy material, the pneumatic pressure arm is essential in making sure the coil stays closed. It also simplifies the changing and handling of the coils. COIL WAGON CW 5 AND CW 10 (OPTION) The hydraulic coil wagon makes the changing and handling of coils safe, easy and quick. The wagon is a very important feature as it will eliminate coil damage during fork lift or overhead crane loading and unloading. Model Max Coil Width Max Coil Weight Horizontal Stroke Vertical Stroke Speed Motor mm ( ) ton mm ( ) mm ( ) m/min kw (hp) CW (61) (65) 300 (11,8) (10) CW (61) (65) 300 (11,8) (1.5) 12

13 STACKING SYSTEMS ST Our standard stacking systems are made for non-sensitive materials and comes in two different versions: 3 and 5 tons. Solutions for sensitive materials are available by customer request. The hydraulic scissor table moves downwards automatically, controlled by an optical sensor to follow the shearing process. The system includes adjustable side guides for better positioning of cut-off sheets. The entire cut to length line is mounted on linear guides and can be moved away from the stacking table in order to simplify the unload of the material. Model Max Load Table Size Max Stacking Height kg (lbs) Width mm ( ) Length mm ( ) mm ( ) ST (6600) 1250 (49) 3100 (122) 500 (20) ST (6600) 1550 (61) 3100 (122) 500 (20) ST (11000) 1250 (49) 3100 (122) 500 (20) ST (11000) 1550 (61) 3100 (122) 500 (20) 13

14 RECOILING SYSTEMS RCO We offer 2 recoiling systems, 5 slits of sheet metal thickness of maximum 1.0 mm (20 ga) and 1.5 mm (16 ga). All systems are for maximum 5 tons recoiling capacity and coils widths 1250 mm and 1500 mm. All our systems are very compact and do not necessarily need a pit for the sheet loop. MAIN ADVANTAGES Perfect recoiling Compact design Low investment costs Easy operation Easy and quick change of coils System 5 RCO Decoiling, feeding, slitting and recoiling System 2 RCO Decoiling, feeding, slitting, cut to length and recoiling System 4 RCO Decoiling, straightening, feeding, slitting, cut to length and recoiling 14

15 RECOILING SYSTEMS RCO Our compact recoiling lines are especially suitable for suppliers of sheet metal fabricators and sheet metal shops. Our system has been proven for its adaptability for all kind of different operations. STANDARD FEATURES Loop control Control system Sheet tensioner via pneumatic felt brake Presser arm Sheet strip separators as 7 guiding discs (21 in total) for max. 6 strips Motorized recoiler Recoiling mandrel manual expansion OPTIONS Hydraulic expansion of mandrel Ejector plate Additional guiding disks (more than 6 strips) -sets of 3 Manual rotary shear (max 1 mm) Electric rotary shear (max 1.5 mm) Higher speed Coil wagon Coil tipper Model Max Coil Weight Max Coil Width Material Thickness Min Strip Width Coil Diameter Max Speed Motor kg (lbs) mm ( ) * mm ( ) Inside mm ( ) Outside mm ( ) m/min (ft/min) kw (hp) RCO (11000) 1250 (49) (28-20) 100 (4) (19-20) 1200 (47) 25 (76) 11 (15) RCO (11000) 1500 (59) (28-16) 100 (4) (19-20) 1200 (47) 25 (76) 22 (30) *at 400 N/mm psi 15

16 RAPIDO The CIDAN model RAPIDO is a heavy built mechanical guillotine shear. It will cut material with thicknesses from minimum to maximum without any settings at all. This shear again proves our philosophy regarding the environment as it uses very little energy and has a very low noise level. The shear is well equipped as standard and also has a wide range of options such as different back gauge systems, including sheet handling systems. STANDARD FEATURES Sturdy, low-noise gear motor Single or continuous stroke control Double edged blades LED cutting line light Finger protection Squaring arms with scale (left and right, 350 mm) (13.7 ) Table with measuring lines Spring loaded hold down beam Foot pedal and button at the electrical cabinet to start the cut Pneumatic sheet support including fixed return plate (blanks to front side of shear) (p. 18) OPTIONS Manual back gauge mm ( ) operated from the front side (p. 19) Motorized back gauge incl CutLink Control and ball screw spindles, 750 mm (29.5 ) or 1000 mm (39.3 ) (p. 19) Moveable blank wagon instead of fixed return plate (return to sender) (extra blank wagon available) (p. 18) Pneumatic sheet support with rails of rolls (delivery to rear of machine, istof return to sender), 1000 mm (39.3 ) (p. 18) Pneumatic hold down beam for cutting aluminum Safety guards on the back of the machine mechanical or with light beam (safety guard is required to fulfill CE directives) 750/800 mm (29.5 /31.5 ) or 1000 mm (39.3 ) Table extension, 800 mm (31.5 ) Adjustable angle gauge system with graduated scale Squaring arm with T-groove, 1000 mm (39.3 ) or 2500 mm (98.4 ) incl. 1 tilting stop (additional stops as option) (p. 19) Forced cooling for cutting motor Model Cutting Width Capacity Speed Motor Weight mm ( ) Steel* Stainless steel** Aluminium*** mm ( ) Cuts/min. kw (hp) kg (lbs) Approx. RAPIDO (53) 3.50 (10) 2.00 (14) 5.00 (.196) (4) 1400 (3100) RAPIDO (100) 2.50 (13) 1.50 (16) 4.00 (.157) (4) 1900 (4200) RAPIDO (122) 2.50 (13) 1.50 (16) 4.00 (.157) (4) 2100 (4630) 16 *at 400 N/mm psi -**at 700 N/mm psi - ***at 200 N/mm psi

17 EVO The CIDAN model EVO is the strongest shear in CIDAN s shearing line. The EVO-series is a heavy built mechanical guillotine shear and is well equipped as standard, blade gap adjustment, sheet support that follows the sheet down during the cutting operation and flexible table rails is some of the standard features, including som nice to have s to match the requirements of demanding customers. The blade gap adjustment makes it possible to achieve the best cutting result in all kind of sheet thicknesses. The blade gap is set quickly and correctly via two handles and scales. The rail arrangements on the table can be combined to meet the customer s demands squaring arm and table extensions are available in different lengths with groove, tilting stops and scales. STANDARD FEATURES Sturdy, low-noise gear motor (no chain and no hydraulics) Single or continuous stroke control Double edged blades for twice the running time Finger protection Blade gap adjustments Spring loaded hold down beam Foot pedal and button at the electrical cabinet to start the cut Pneumatic Sheet support with fixed return plate (blanks to front side of shear) (p. 18) Two T-groove rails on table for optional flexible sheet handling eqiupment LED cutting line light OPTIONS Manual back gauge ( ) mm operated from the front side (p. 19) Motorized back gauge incl. CutLink Control and ball screw spindles (p. 19) Pneumatic sheet support with rails of rolls (delivery to rear of machine, istof return to sender) (p. 18) Moveable blank wagon on wheels instead of fixed return plate (extra blank wagon available) (p. 18) Pneumatic hold down beam for cutting aluminum Adjustable angle gauge system with graduated scale Safety guards on the back of the machine mechanical or with light beam (safety guard is required to fulfill CE directives) 750/800 mm (29.5 /31.5 ) or 1000 mm (39.3 ) Squaring arms from 440 mm (17.3 ) to 3000 mm (118 ), with or without tilting stops (p. 19) Support arms in front, from 416 mm (16.3 ) to 3000 mm (118 ), with or without tilting stops Table pans, with or without ball transfers Forced cooling for cutting motor Model Cutting Length Capacity Speed Outer Dimensions*** Motor Weight mm ( ) Steel* Stainless steel** Aluminium*** Cuts/min Length X Width X Height* mm ( ) kw (hp) kg (lbs) Approx. EVO (100) 4.00 (9) 2.25 (14) 5.50 (.216) X 1600 X (7.5) 1890 (4167) EVO (122) 4.00 (9) 2.25 (14) 5.50 (.216) X 1600 X (7.5) 2280 (4806) EVO (161) 2.00 (14) 1.25 (18) 3.00 (.118) X 1600 X (7.5) 2670 (5778) *400 N/mm? -**700 N/mm? - ***200 N/mm? *** med motoranslag 750 mm och skyddsgrindar 17

18 SHEET HANDLING SYSTEMS When cutting thin materials the sheet must be supported during measuring. A sheet support system prevents the material from hanging down until it reaches the back gauge rail. Additionally, RAPIDO and EVO shears can be supplied with different systems to deliver the cut-off sheets to the front or to the rear of the machine. SHEET SUPPORT WITH RETURN PLATE Delivers the cut-off sheets to the front of the shear. The sheet support is pneumatically activated and different functions can be controlled by the CutLink control. BLANK WAGON ON WHEELS Easily move the blanks to other workstation Offered as an alternative to fixed return plate for return to sender Extra wagon is available SHEET SUPPORT WITH DELIVERY TO THE REAR Pneumatic sheet support with rolls Delivers the cut-off sheets to the rear of the machine. Available for both RAPIDO and EVO 18

19 MEASURING SYSTEMS MANUAL BACK GAUGE Operated from the front side of the machine. Positioning via hand wheel and digital outread, 800 mm (31.5 ). PROGRAMMABLE BACK GAUGE CutLink This motorized back gauge is a fast and accurate positioning system, with many interesting features for easier handling of sheets, such as selection of position of the sheet support. Even the movement of the hold down beam can be controlled separately. MANUAL MODE Push on length measure and type in new position of back gauge. As soon as the dimension is acknowledged the back gauge will move to new position. The amount counter can be set to count upwards or downwards. When changing the length, the counter is reset. AUTOMATIC OPERATION In automatic operation it is possible to program a number of different dimensions and amounts, then they will be executed in a sequence. The program can contain 10 lines with different dimensions. To change values on length and dimension push on the text field and type in a new value. SQUARING ARM Squaring arm with or without T-grove for tilting stop Avaliable from 440 mm (17.3 ) to 3000 mm (118 ) for EVO, and 1000 mm (39.3 ) or 2500 mm (98.4 ) for RAPIDO. TABLE EXTENSION Table extension available for RAPIDO, 800 mm (31 ). For EVO there are support arms from 416 mm (16.3 ) up to 3000 mm (118 ), with or without tilting stop. 19

20 OUR COMPANIES SWEDEN DENMARK USA CHINA CIDAN Machinery markets the brand CIDAN world wide and our machines are sold via dealers and agents in more than 30 countries. FOLDING MACHINES For more than 100 years we have produced sheet metal machinery and now we offer one of the widest machine programs on the market. Our machines are produced in comprehensive production facilities in Sweden. All our machine concepts are based on our own developments and our own patents, and we focus on flexible and simple-to-use solutions of the highest quality. CIDAN Machinery also manufactures a wide range of folding machines, see separate catalogue. DENMARK: Sales & service CIDAN Machinery Denmark A/S Hedevej 44 DK-7171 Uldum Phone info@cidanmachinery.com SWEDEN: Production, sales & service CIDAN Machinery Sweden AB P.O. Box 28 SE Götene Phone +46 (0) info@cidanmachinery.com USA: Sales & service CIDAN Machinery Inc. 611 Highway 74 South, Suite 700 Peachtree City, GA Phone info@cidanmachinery.com CHINA: Sales & service CIDAN Machinery Trading Shanghai Co, Ltd. No.1155 Yuanda Road Anting Town Jiading District, Shanghai, Phone +86(0) info@cidanmachinery.cn Note 1: Machines on photo in the catalogue can be equipped with options Note 2: Please refer to the web-site for the latest news and valid product information

FOLDING MACHINES COIL PROCESSING SHEARING SYSTEMS

FOLDING MACHINES COIL PROCESSING SHEARING SYSTEMS FOLDING MACHINES COIL PROCESSING SHEARING SYSTEMS SHEET METAL MACHINERY FOR LIFE THE CLEVER CHOICE - FOLDER A CIDAN folding machine offers a convenient, flexible and efficient way to bend sheet metal into

More information

Hydraulic Swing Beam Shear POWERcut

Hydraulic Swing Beam Shear POWERcut RAS Reinhardt Maschinenbau GmbH RAS : Much more than just power! A concept for all requirements Do you often find burrs on the cut pieces, because you forgot to adjust the blade clearance properly? Are

More information

METALMASTER HG-3216VR. Hydraulic NC Guillotine - Variable Rake x 16mm Mild Steel Shearing Capacity. Product Brochure

METALMASTER HG-3216VR. Hydraulic NC Guillotine - Variable Rake x 16mm Mild Steel Shearing Capacity. Product Brochure Product Brochure S9615 METALMASTER HG-3216VR Hydraulic NC Guillotine - Variable Rake 3200 x 16mm Mild Steel Shearing Capacity Page 1 of 5 Right View Front View Side View Rear Guarding 3 Safety Electronic

More information

$42, $46, Product Brochure For S961. Features

$42, $46, Product Brochure For S961. Features HG-3212VR - 3200 x 12mm Mild Steel Shearing Capacity 1-Axis Ezy-Set NC-89 Go-To Control & Hardened Ballscrew Backgauge ORDER CODE: MODEL: Ex GST Inc GST $42,500.00 $46,750.00 S961 HG-3212VR Shearing Capacity

More information

WELDING POSITIONING EQUIPMENT. JMT offers quality machine tools for all your sheet metal fabrication needs.

WELDING POSITIONING EQUIPMENT. JMT offers quality machine tools for all your sheet metal fabrication needs. WELDING POSITIONING EQUIPMENT JMT offers quality machine tools for all your sheet metal fabrication needs. JMTUSA.com Email: JMT@JMTUSA.com Toll Free: 855-773-7727 (855-PRESS-BRAKE) JMT sells and services

More information

WELDING POSITIONING EQUIPMENT

WELDING POSITIONING EQUIPMENT WELDING POSITIONING EQUIPMENT It s difficult to compete in today s world with yesterday s technology. We have solutions. JMTUSA.com Email: JMT@JMTUSA.com Toll Free: 855-773-7727 (855-PRESS-BRAKE) JMT designs

More information

M-Shear. Superior cutting technology with hybrid drive

M-Shear. Superior cutting technology with hybrid drive Superior cutting technology with hybrid drive De The E-volutie E-volution in plaatbewerking sheet metal working The E-volution in sheet metal working increases your competitive strength as a manufacturer

More information

Hydraulic NC Guillotine & NC Panbrake Package Deal

Hydraulic NC Guillotine & NC Panbrake Package Deal Product Brochure K059 METALMASTER HG-2504 & PB-830T Hydraulic NC Guillotine & NC Panbrake Package Deal Ezy-Set NC-89 Guillotine - 2500 x 4mm, NC Ezy Touch Screen Panbrake 2500 x 4mm Page 1 of 6 Specifications

More information

CSNC CARBIDE CIRCULAR SERIES

CSNC CARBIDE CIRCULAR SERIES CSNC CARBIDE CIRCULAR SERIES HIGHLY EFFICIENT AND PRODUCTIVE HIGH SPEED CIRCULAR SAWING MACHINES CARBIDE SAWS DO THE WORK OF FIVE CONVENTIONAL FACTORY BAND SAWS, WITHOUT SACRIFICING QUALITY. GET THE CLOSE-CUT

More information

CONTENTS PRECAUTIONS BEFORE STARTING OPERATION PREPARATION FOR OPERATION CAUTIONS ON USE OPERATION

CONTENTS PRECAUTIONS BEFORE STARTING OPERATION PREPARATION FOR OPERATION CAUTIONS ON USE OPERATION CONTENTS PRECAUTIONS BEFORE STARTING OPERATION ------------------------------------- 1 PREPARATION FOR OPERATION 1. Adjustment of needle bar stop position ---------------------------------------------------------

More information

Sheet Metal Working Machinery

Sheet Metal Working Machinery Sheet Metal Working Machinery Tile Sheet Rollformers, Roofing and Cladding Profile Rollformers, Cut-to-length and Slitting Machinery, Additional Equipment September 2009 2 Sheet Metal Working Machinery

More information

Folding Center XL-Center

Folding Center XL-Center RAS Reinhardt Maschinenbau GmbH : Compact innovation! The is a folding innovation for light gauge sheet metal profiles used mainly in the roofing and architectural industry. With 3200 mm (126") of folding

More information

si 300 s nova manual, electronically programmable circular saws si 7500

si 300 s nova manual, electronically programmable circular saws si 7500 si 300 s nova manual, electronically programmable circular saws si 7500 scmcircular saws The widest range of circular saws offering the market the latest and advanced technological solutions that different

More information

si 300 s nova electronically programmable and manual circular saws

si 300 s nova electronically programmable and manual circular saws si 300 s nova and manual si 75 scm The widest range of offering the market the latest and advanced technological solutions that different types of production urgently requires. O3 L invincibile the exclusive

More information

Coil Handling and Press Feeding Equipment YESTERDAY S INTEGRITY. TOMORROW S TECHNOLOGY.

Coil Handling and Press Feeding Equipment YESTERDAY S INTEGRITY. TOMORROW S TECHNOLOGY. Coil Handling and Press Feeding Equipment YESTERDAY S INTEGRITY. TOMORROW S TECHNOLOGY. CORPORATE OVERVIEW Founded in 1966, CHS Automation has become the industry leader in coil handling equipment. Technology

More information

throughfeed moulders superset tx automatic throughfeed moulder

throughfeed moulders superset tx automatic throughfeed moulder throughfeed moulders superset tx automatic throughfeed moulder superset tx automatic throughfeed moulder Topset XL is the ideal solution for producing prismatic profiles, frames, profiles and linear parts

More information

TOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER

TOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The

More information

Edge banders CNC machining centres Vertical panel saws Pressure beam saws. Compact Dimensions Maximum Performance CUT 6120

Edge banders CNC machining centres Vertical panel saws Pressure beam saws. Compact Dimensions Maximum Performance CUT 6120 Edge banders CNC machining centres Vertical panel saws Pressure beam saws Compact Dimensions Maximum Performance CUT 6120 P R D U C T I V I T Y A N D P R E C I S I N C U T 6 1 2 0 The saw with the high

More information

MY NEW WA 80. FEATURES, OPTIONS.

MY NEW WA 80. FEATURES, OPTIONS. MY NEW WA 80. FEATURES, OPTIONS. 2 ALTENDORF WA 80 Two models, one promise: Performance, you can count on. WA 80 TE Page 4 WA 80 X Page 6 Altendorf WA 80 TE with motorised rise / fall and tilt adjustment

More information

Options book Planers

Options book Planers Options book Planers www.martin.info Alongside the basic equipment MARTIN planers have numerous, useful and also patented options, which perfect your workpiece and add value to your machine. Easily configure

More information

XXL-Center. Cutting. Bending. Forming. R E I N H A R D T MASCHINENBAU D SINDELFINGEN D SINDELFINGEN RICHARD-WAGNER-STR.

XXL-Center. Cutting. Bending. Forming. R E I N H A R D T MASCHINENBAU D SINDELFINGEN D SINDELFINGEN RICHARD-WAGNER-STR. Cutting. Bending. Forming. XXL-Center D-71045 SINDELFINGEN P O S T F A C H 3 6 9 T E L E F O N 0 7 0 3 1-8 6 3-0 D-71065 SINDELFINGEN RICHARD-WAGNER-STR. 4 10 T E L E F A X 0 70 31-863-185 R E I N H A

More information

Kentwood M509X 5 Head Moulder

Kentwood M509X 5 Head Moulder TECH SPEC MS 31513 PAGE 1 Kentwood M509X 5 Head Moulder The Kentwood M509X 5 Head through feed Moulder s heavy cast iron construction, tight tolerance spindle assemblies, rugged feed works, heavy duty

More information

CWP FEEDS FULL-FEATURED FEEDING TECHNOLOGY. cooper-weymouth, peterson

CWP FEEDS FULL-FEATURED FEEDING TECHNOLOGY. cooper-weymouth, peterson CWP FEEDS FULL-FEATURED FEEDING TECHNOLOGY cooper-weymouth, peterson SERVO FEEDS ServoMax SE feeds are designed around the proven performance, accuracy and rugged reliability of ServoMax II feeds. ServoMax

More information

Instruction Manual X97

Instruction Manual X97 Index Page Technical data... 2 Dimensions... 3 General description... 4 Selection of cutter... 5 Instruction for grinding... 5 Dimensions of bevel... 7 Bevelling angle... 8 Adjustment: Straight edge (Land)...

More information

Swing Beam Shear SMARTcut / PRIMEcut

Swing Beam Shear SMARTcut / PRIMEcut RAS Reinhardt Maschinenbau GmbH The perfect cut The RAS SMARTcut and RAS PRIMEcut swing beam shears combine all the features and benefits you expect from the latest shearing technology. Clean and square

More information

RAS TURBObend METAL FOLDING SYSTEM

RAS TURBObend METAL FOLDING SYSTEM Cutting. Bending. Forming. RAS TURBObend METAL FOLDING SYSTEM D-71045 SINDELFINGEN P O S T F A C H 3 6 9 T E L E F O N 0 7 0 3 1-8 6 3-0 D-71065 SINDELFINGEN RICHARD-WAGNER-STR. 4 10 T E L E F A X 0 70

More information

Swing Beam Shear SMARTcut / PRIMEcut

Swing Beam Shear SMARTcut / PRIMEcut RAS Reinhardt Maschinenbau GmbH The perfect cut The RAS SMARTcut and RAS PRIMEcut swing beam shears combine all the features and benefits you expect from the latest shearing technology. Clean and square

More information

Manufacturers of Wood Working Machineries

Manufacturers of Wood Working Machineries RUEI RUEI R Manufacturers of Wood Working Machineries RUEI www.rueiindustries.com RUEI 2 Welcome to Ruei Industries..! RUEI INDUSTRIES, is one of the leading manufacturer, supplier and exporter of Wood

More information

Product Brochure For S884S. Description. Features. Sydney: (02) Brisbane: (07) Melbourne: (03) Perth: (08)

Product Brochure For S884S. Description. Features. Sydney: (02) Brisbane: (07) Melbourne: (03) Perth: (08) APHS-31120 - Hydraulic CNC Pressbrake 120T, 7 Axis, Delem DA69T Touch Screen Control Includes Programmable X, Y1, Y2, V, Z1, Z2 & R-Axis. CNC Table Crowning, Laser Guarding System & Rolleri ROL200 Quick

More information

Folding Center XXL-Center

Folding Center XXL-Center RAS Reinhardt Maschinenbau GmbH RAS : A revolution in folding long parts Does this sound familiar? Your bread and butter is in long parts, but bending them requires two, maybe three operators. The floor

More information

Laser Guided Rod Wrapper

Laser Guided Rod Wrapper Laser Guided Rod Wrapper Operating Manual V 1.2 Quinchat Rods LLC Machines for Makers of Bamboo Rods www.quinchat.webs.com V 1.2 page 1 V 1.2 page 2 Table of Contents 1. Laser Guided Rod Wrapper Features

More information

FBX-PA-2AC. Third edition : April No

FBX-PA-2AC. Third edition : April No FBX-PA-2AC Third edition : April 2006 No. 060058 INTRODUCTION Thank you very much for purchasing Kansai Special FBX series. Read and study this Instruction Manual carefully before you start any of the

More information

FRÖHLING INSIGHT.

FRÖHLING INSIGHT. 03.2018 FRÖHLING INSIGHT www.danieli-froehling.de 2 DANIELI Fröhling WAELZHOLZ NEW MATERIAL ORDERS COLD REVERSING MILL AND TWO FINISHING LINES O n November 23, 2017, Waelzholz New Material Co., Ltd, awarded

More information

Reed pipe tools and vises

Reed pipe tools and vises Reed pipe tools and vises Reed have been producing fine tools for professional craftsmen since 1896. Reed engineers have developed many of the most innovative and effective tools in the industry - such

More information

ALFRA PRESS. Made in Germany by ALFRA

ALFRA PRESS. Made in Germany by ALFRA 52 ALFRA PRESS Made in Germany by ALFRA 53 ALFRA PRESS Overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 56 Page 58 Control cabinet housing, control cabinet doors, mounting plates Control cabinet housing,

More information

Spindle moulder T 20 Tilting arbor spindle moulder T 26

Spindle moulder T 20 Tilting arbor spindle moulder T 26 Sägen Hobeln Fräsen Otto Martin Maschinenbau GmbH & Co. KG Langenberger Str. 6 87724 Ottobeuren / Germany Spindle moulder T 20 Tilting arbor spindle moulder T 26 Phone: +49 (0) 83 32 / 911-0 Fax: +49 (0)

More information

ME 25 ENGLAND. Tel +44 (0) Web 1 Blatchford Road, Horsham, West Sussex RH13 5QR

ME 25 ENGLAND. Tel +44 (0) Web   1 Blatchford Road, Horsham, West Sussex RH13 5QR ENG ME 25 Automatic edge bander me 25 THE INNOVATIVE AUTOMATIC EDGE BANDING MACHINE FOR CRAFT JOINER S SHOPS Stable, steady, with constantly maintained adjustments, thanks to the stainless steel single-block

More information

DOOR AND WINDOW COPE & STICK SYSTEMS HIGH PERFORMANCE PRODUCTION

DOOR AND WINDOW COPE & STICK SYSTEMS HIGH PERFORMANCE PRODUCTION DOOR AND WINDOW COPE & STICK SYSTEMS HIGH PERFORMANCE PRODUCTION P99-1 R-10C SINGLE END COPING SYSTEM Designed for a dedicated and accurate coping center with single or multiple part capability. Operation

More information

Generic Specifications for a. HOLZMA HPP 350 with Cadmatic 4.0

Generic Specifications for a. HOLZMA HPP 350 with Cadmatic 4.0 Holzma s HPP 350 is a flexible saw center. This CNC controlled machine features fast, simple programming coupled with high operating speeds to meet today s varied production requirements. Designed for

More information

FlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company

FlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company FlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company The universal genius from WEINIG: FlexiRip is synonymous with flexible ripping The original Jrion from WEINIG stands for

More information

of the rollers on top of each other for each press of the rollers. A self-supporting rack enables the avoidance of misalignment

of the rollers on top of each other for each press of the rollers. A self-supporting rack enables the avoidance of misalignment Products for levelling and shaping band saws, guide rails, circular saws and circular knives MR 0 The MR 0 is conducive to the levelling of saw bands and guide rails. With the addition of an auxiliary

More information

Intelligently controlled. Precisely profiled. Four-sided solution.

Intelligently controlled. Precisely profiled. Four-sided solution. Intelligently controlled. Precisely profiled. Four-sided solution. Our Planing and Moulding Machine MOULDTEQ M-300 YOUR SOLUTION 02 HOMAG MOULDTEQ M-300 Highlights Prepared for the future With the MOULDTEQ

More information

Brandt Automatic Edgebander Optimat Model KDF 670 2C

Brandt Automatic Edgebander Optimat Model KDF 670 2C Brandt Automatic Edgebander Optimat Model KDF 670 2C PC-16 Program Control: - Color matrix LCD screen display - 8mb RAM - Manual push button controls or program control operation Equipped with digital

More information

SECTOR Series. Maximum Cutting Precision in Minimum Space PRODUCTIVITY AND PRECISION

SECTOR Series. Maximum Cutting Precision in Minimum Space PRODUCTIVITY AND PRECISION Edgebanders CNC Machining Centers Vertical Panel Saws Beam Saws Panel Handling Maximum Cutting Precision in Minimum Space SECTOR Series PRODUCTIVITY AND PRECISION The SECTOR Series always ensures clean

More information

ELECTRONIC DOUBLE HEAD CUTTING MACHINE 500 TS

ELECTRONIC DOUBLE HEAD CUTTING MACHINE 500 TS ELECTRONIC DOUBLE HEAD CUTTING MACHINE 500 TS 500 TS - 500 CD - 500 D2K Electronic double head cutting machine The double head cutting machines made by Pertici boast unique features in terms of build quality

More information

HIGH SPEED CUTTING QUANTITY Excellence in cutting

HIGH SPEED CUTTING QUANTITY Excellence in cutting HYDRAULIC SWING SHEAR MS7-4x2500 HIGH SPEED CUTTING QUANTITY Excellence in cutting STANDARDS: - Swing beam shesrs with Euro design - ESTUN E21s NC Controller System - Motorized blade gap adjustment - 600mm

More information

Strip straighteners. Strip spectrum The following coil strips can be processed using our straightening

Strip straighteners. Strip spectrum The following coil strips can be processed using our straightening STRIP STRAIGHTENERS Strip straighteners SOPREM Precision Straighteners ensure your product quality. Distorted metal components are a thing of the past; today quality products are processed regardless of

More information

SPIDA SAW OPERATIONS MANUAL

SPIDA SAW OPERATIONS MANUAL SPIDA SAW OPERATIONS MANUAL CM SERIAL NUMBER. OCTOBER 2000 CONTENTS Page description 1.) Contents 2.) Safety First 3.) CM Overview 4.) CM Specifications 5.) CM Installation 6.) CM Operation Setting the

More information

P225 STANDARD FEATURES OPTIONAL FEATURES

P225 STANDARD FEATURES OPTIONAL FEATURES CIRCULAR COLD SAWS P225 Manually operated Robust sawing head miters 45 left Bench top model no base Single blade speed of 1 HP Manual vise Material work stop rod for multiple cuts of the same length Flood

More information

MS HYDRAULIC GUILLOTINE SHEAR

MS HYDRAULIC GUILLOTINE SHEAR MS-25-10 HYDRAULIC GUILLOTE SHEAR MS-25-10 HYDRAULIC GUILLOTE SHEAR STANDARD Low speed electric motor & low hydraulic working pressure ensures long life. If the remote foot-pedal control is released anywhere

More information

Conference contribution: The Choice of the Most Suitable Slitting System for Slitting Thin Aluminium Foils

Conference contribution: The Choice of the Most Suitable Slitting System for Slitting Thin Aluminium Foils Conference contribution: The Choice of the Most Suitable Slitting System for Slitting Thin Aluminium Foils Referent: Mr. Hermann Jeremies, DIENES Werke Agenda 1.0 Preface 2.0 Slitting Technology 3.0 Resume

More information

SPECIFICATIONS MS-10-5 MS Cutting capacity (Rated 80,000 PSI Tensile) Cutting length 62 in "

SPECIFICATIONS MS-10-5 MS Cutting capacity (Rated 80,000 PSI Tensile) Cutting length 62 in MS-25-10 STANDARD Low speed electric motor & low hydraulic working pressure ensures long life. If the remote foot-pedal control is released anywhere in the stroke the ram returns to "up" position. Two

More information

CM6200 MILLING MACHINE

CM6200 MILLING MACHINE CM6200 MILLING MACHINE PORTABLE ON - SITE MACHINING SOLUTIONS FOR LARGE FLANGE MACHINING Quality Machine Design Provides Rigid, Power-Packed Performance Extraordinarily rigid design ensures consistent,

More information

Weeke CNC Machining Center, Model BHC 350 4/10 Optimat

Weeke CNC Machining Center, Model BHC 350 4/10 Optimat Technical Specification March 11, 2004 Page 1 Weeke CNC Machining Center, Model BHC 350 4/10 Optimat Weeke's BHC 350 4/10 Optimat is a flexible CNC machining center designed primarily for routing, boring,

More information

Contents. Contents G BEND Bending G MASTER Bending G HD Bending 8-11 G PRO - Bending. 4 The company 6 Why Boschert Gizelis?

Contents. Contents G BEND Bending G MASTER Bending G HD Bending 8-11 G PRO - Bending. 4 The company 6 Why Boschert Gizelis? Hajlítás és Vágás Contents 4 The company 6 Why Boschert Gizelis? Contents 8-11 G BEND Bending 4 The company 12-15 G MASTER Bending 6 Why Boschert Gizelis? 16-19 G HD Bending 8-11 G PRO - Bending 20-23

More information

SPRINT 1320 /1321. Special Machines. The benchmark for flexibility and high productivity. Y our partner for productivity and precision

SPRINT 1320 /1321. Special Machines. The benchmark for flexibility and high productivity. Y our partner for productivity and precision SPRINT 1320 /1321 The benchmark for flexibility and high productivity Y our partner for productivity and precision Special Machines SPRINT 1320 /1321 Two series, individual equipment packages SPRINT 1320

More information

Swing beam hydraulic shear. Heavy-duty, all-welded-steel rigid frame. Hold-down pressure adjustment depending on cutting pressure

Swing beam hydraulic shear. Heavy-duty, all-welded-steel rigid frame. Hold-down pressure adjustment depending on cutting pressure Swing beam hydraulic shear Heavy-duty, all-welded-steel rigid frame Hold-down pressure adjustment depending on cutting pressure Colour Touch Screen 10,4 Programmed cutting length Close hold-downs near

More information

joinery machines minimax e 10/t 20 manual edge bander and trimming machine for straight and shaped panels

joinery machines minimax e 10/t 20 manual edge bander and trimming machine for straight and shaped panels joinery machines minimax e 10/t 20 manual edge bander and trimming machine for straight and shaped panels minimax e 10 manual edge bander for straight and shaped panels. Simply essential and functional

More information

A M Supply Co. Metalworking Machinery. Drill Presses Jet Tools J-2221VS 20" Variable Speed Drill Press 115/230V 1Ph

A M Supply Co. Metalworking Machinery. Drill Presses Jet Tools J-2221VS 20 Variable Speed Drill Press 115/230V 1Ph Drill Presses J-2221VS 20" Variable Speed Drill Press 115/230V 1Ph Part # Style Drills to Center Drilling Cap. Cast Drilling Cap. Mild Distance Column Circle Iron Steel to Spindle 354221 Variable 20" 1-1/4"

More information

FOLDING MACHINE MAKU

FOLDING MACHINE MAKU NEW FOLDING MACHINE MAKU MAKU - motorized series production The new, versatile motorized folding machine of the MAK-series is perfect for sheet metal processing in small- and medium-sized workshops. In

More information

Weeke Machining Center, Model BP-100 Optimat

Weeke Machining Center, Model BP-100 Optimat This PDF file has not been verified for accuracy. BEFORE BIDDING, all bidders should use the inspection period to verify specifications. Weeke Machining Center, Model BP-100 Optimat Weeke's BP-100 is a

More information

STANDARD STANDARD PRODUCT CATALOG SHEET METAL MACHINERY SHEET METAL MACHINERY

STANDARD STANDARD PRODUCT CATALOG SHEET METAL MACHINERY SHEET METAL MACHINERY STANDARD STANDARD SHEET METAL MACHINERY SHEET METAL MACHINERY PRODUCT CATALOG Standard Sheet Metal Machinery, Inc., is incorporated in Lisbon, Iowa USA. The company speciaizes in sales and service of machinery

More information

$99, $109, Product Brochure For S8892. Description. Features

$99, $109, Product Brochure For S8892. Description. Features APHS-41160 - Hydraulic CNC Pressbrake 160T, 5 Axis, Delem DA58T Touch Screen Control Includes Programmable X, Y1, Y2, V & R-Axis. CNC Table Crowning & Laser Guarding System Ex GST Inc GST $99,500.00 $109,450.00

More information

InTurn Ultra and Ultra-T Indexing and Turning 4 th axis

InTurn Ultra and Ultra-T Indexing and Turning 4 th axis Specifications for the InTurn Ultra and Ultra-T Indexing and Turning 4 th axis Industrial quality. 100% duty cycle. Production ready. The InTurn series is the only CNC mill accessory that provides both

More information

TOOLS AND INSTALLATION

TOOLS AND INSTALLATION TOOLS AND INSTALLATION Safe, leak-free operation of any high-pressure system is dependent on correctly prepared and installed connections. This section outlines proper instructions for the machining and

More information

PRO Series Brakes Operating Instructions

PRO Series Brakes Operating Instructions PRO Series Brakes Operating Instructions Tapco Products Company PRO Brake System PRO Cut Off Gauge Simplifies cutting. PRO Cut-Off Quickly, safely, and easily makes factory quality cuts in coil stock,

More information

TRAV-L-CUTTER Pipe Cutter

TRAV-L-CUTTER Pipe Cutter TRAV-L-CUTTER Pipe Cutter Horizontal and vertical c utting Fast and accurate cutting and beveling Add mounting chain sections to fit larger diameters COLD CUTTING, COMPACT DESIGN, EASY SET-UP The Wachs

More information

ACCURL Genius Guillotine Shears. Model : MS8-13x3200. (Excellent cut, Perfect speed)

ACCURL Genius Guillotine Shears. Model : MS8-13x3200. (Excellent cut, Perfect speed) ACCURL Genius Guillotine Shears Model : MS8-13x3200 (Excellent cut, Perfect speed) Excellent cut, perfect speed. ACCURL CNC Hydraulic Guillotine Shear can cut all kind of metal sheet to maintain the highest

More information

AMC-SCHOU Cylindrical grinders

AMC-SCHOU Cylindrical grinders AMC-SCHOU Cylindrical grinders The Benefits of Precision Company history and Profile AMC-SCHOU A/S has been around for more than 60 years and has always been involved in precision grinding. Today, AMC-SCHOU

More information

ALUMINIUM. Experience the key to the future...

ALUMINIUM. Experience the key to the future... AUMINIUM Experience the key to the future... 2 3 experience STRIP SITTING SITTER. WINDER. KAMPF. For a modern and profitable production of aluminium flat rolled products and converted foils, productivity

More information

.com More than a machine. Power your life

.com More than a machine. Power your life Hydraulic Clamp 50mm Heavy Duty Radial Drilling Machine with Variable Speed Proven Performance, Quality and Cost-Effeteness www.maxnovomachine +86-514-87892928 info@maxnovomachine This kind of MM-R50V

More information

March weeks. surcharge for

March weeks. surcharge for March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not

More information

Mobile Weapons Storage System Specifications

Mobile Weapons Storage System Specifications Mobile Weapons Storage System Specifications Whatever your weapon storage needs, Hi-Density s customized Weapons Storage System will be designed to fit your unique specifications. We recognize that security

More information

ENG classic Catalogo Minimax Classic_Ing.indd 2 Catalogo Minimax Classic_Ing.indd 2 13/12/ /12/

ENG classic Catalogo Minimax Classic_Ing.indd 2 Catalogo Minimax Classic_Ing.indd 2 13/12/ /12/ classic ENG the range UNIVERSAL COMBINED MACHINES CU 41O CLASSIC page 06 CU 3OO CLASSIC page 07 SURFACING- THICKNESSING PLANERS FS 41 CLASSIC SIC page 08 FS 3O CLASSIC page 09 SAW-SPINDLE MOULDER ST 3

More information

sales dept. Italy: foreign sales dept.: registered offi ce: sales offi ce: classic

sales dept. Italy: foreign sales dept.: registered offi ce: sales offi ce: classic ENG SCM INDUSTRIA SPA PROFESSIONAL WORKSHOP MACHINERY via Valdicella, 7-47892 Gualdicciolo - Repubblica San Marino sales dept. Italy: tel. +378 0549 876911 - fax +378 0549 999604 foreign sales dept.: tel.

More information

Series 8 Mark II. Universal Vertical Band Saw

Series 8 Mark II. Universal Vertical Band Saw Series 8 Mark II Universal Vertical Band Saw Capacity 18 x 22 Marvel Series 8 Mark II Universal Tilt-Frame Vertical Band Saw The Marvel Series 8 Mark II has a capacity of 18 x 22 (18 diameter round) with

More information

PERFORMANCE RACING AND ENGINE REBUILDING MACHINERY AND EQUIPMENT

PERFORMANCE RACING AND ENGINE REBUILDING MACHINERY AND EQUIPMENT PERFORMANCE RACING AND ENGINE REBUILDING MACHINERY AND EQUIPMENT F8A F8A with Big Block Merlin Features The F Series Boring Machines are unlike anything else available to the automotive and diesel engine

More information

IW SERIES IRONWORKERS DURMA

IW SERIES IRONWORKERS DURMA IW SERIES IRONWORKERS BETTER PARTS BETTER PROFITS IW SERIES IRONWORKERS STANDARD EQUIPMENT Swing Away Stripper Punching Station Section Cutting Angle Cutting Flat Bar Shearing Notching Twist and Drop Punch

More information

Current status of Disk Lasers for sheetmetal cutting and welding

Current status of Disk Lasers for sheetmetal cutting and welding Current status of Disk Lasers for sheetmetal cutting and welding Iwan Papic, Gerry Jones TRUMPF Luton AILU 12 November 2008 Disk lasers for cutting and welding 12.11.2008 Presentation outline Disk laser

More information

Production Program CUTTING BENDING FORMING SOFTWARE. RAS Reinhardt Maschinenbau GmbH. 2

Production Program CUTTING BENDING FORMING SOFTWARE. RAS Reinhardt Maschinenbau GmbH.   2 Production Program CUTTING BENDING FORMING SOFTWARE RAS Reinhardt Maschinenbau GmbH www.ras-online.de 2 Product-Finder BENDING Folding Frequently changing parts and small batch sizes require a universal

More information

FBX1104P FBX1104 FBX1106P FBX1106

FBX1104P FBX1104 FBX1106P FBX1106 FBX1104P FBX1104 FBX1106P FBX1106 Second edition : September 2004 No. 040037 INTRODUCTION Thank you for your purchasing Kansai Special's FBX Series. Read and study this instruction manual carefully before

More information

Model PM Series Three Axis Mills

Model PM Series Three Axis Mills Model PM Series Three Axis Mills PM3000 PM2000 Features Setup & Operation Technical Data CLIMAX Portable Machine Tools, Inc. 10/98 1 Features Climax's PM Series 3-axis portable milling machines provide

More information

MEREEN-JOHNSON. 400 Series Fixed Arbor Dip Chain Multiple Rip Saws. Setting the Standard Since 1905

MEREEN-JOHNSON. 400 Series Fixed Arbor Dip Chain Multiple Rip Saws. Setting the Standard Since 1905 MJ MEREEN-JOHNSON 400 Series Fixed Arbor Dip Chain Multiple Rip Saws Setting the Standard Since 1905 400 SERIES MULTIPLE RIP Setting the Standard Guaranteed Glue Joint Accuracy Minimal Maintenance High

More information

DIE-CRAFT QWIKFRAME SFS-3000 / SFS-3500 STEEL FRAMING SYSTEM QWIKFRAME 7/21/2008. Die-Craft Steel Framing Systems Created By: M.

DIE-CRAFT QWIKFRAME SFS-3000 / SFS-3500 STEEL FRAMING SYSTEM QWIKFRAME 7/21/2008. Die-Craft Steel Framing Systems Created By: M. QWIKFRAME 7/21/2008 A SOLUTION FOR THE FUTURE OF YOUR BUISNESS DCQ-REV-01 DIE-CRAFT QWIKFRAME SFS-3000 / SFS-3500 STEEL FRAMING SYSTEM Die-Craft Steel Framing Systems Created By: M.Osborne Contents Included

More information

Trade of Sheet Metalwork. Module 7: Introduction to CNC Sheet Metal Manufacturing Unit 2: CNC Machines Phase 2

Trade of Sheet Metalwork. Module 7: Introduction to CNC Sheet Metal Manufacturing Unit 2: CNC Machines Phase 2 Trade of Sheet Metalwork Module 7: Introduction to CNC Sheet Metal Manufacturing Unit 2: CNC Machines Phase 2 Table of Contents List of Figures... 4 List of Tables... 5 Document Release History... 6 Module

More information

CATALOG TOOL STEEL ELECTRIC

CATALOG TOOL STEEL ELECTRIC CATALOG TOOL STEEL ELECTRIC 1/26 BENDING MACHINES Biegeboy bending machine For bending panels with turned-up edges up to a turn-up height of 50mm. Very small radii are produced in several passes. 40 cm

More information

The Speed of Live and the Accuracy of Fixed

The Speed of Live and the Accuracy of Fixed The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.

More information

Product Information. Circumferential Welders

Product Information. Circumferential Welders Product Information Circumferential Welders Microprocessor Control Three Models For all Welding Processes Large Weight Capacities Operator Friendly Various Part Lengths Introduction Jetline offers a unique

More information

PLANING MACHINES ADM 311 PT 410 FS 410 N FS 400 V AD 410 S AD 410 P SP 150 SP 200 SP 300 TH 330

PLANING MACHINES ADM 311 PT 410 FS 410 N FS 400 V AD 410 S AD 410 P SP 150 SP 200 SP 300 TH 330 PLANING MACHINES PT 200 PT 250 PT 200 ED PT 260 ADH 250 ADM 260 PT 310 FS 310 N ADM 300 ADM 300 V 2012 ADM 311 PT 410 FS 410 N FS 400 V AD 410 S AD 410 P SP 150 SP 200 SP 300 TH 330 TP 410 DH 520 DH 630

More information

110FC STRAIGHT LINE EDGER VICTRALUX 110FC MODEL VICTRALUX 110FC

110FC STRAIGHT LINE EDGER VICTRALUX 110FC MODEL VICTRALUX 110FC STRAIGHT LINE EDGER VICTRALUX MODEL STRUCTURE AND MACHINE DESCRIPTION The straight line edger is made up of a pair of shoulders of considerable length (200 mm) connected by a base. The beams have been

More information

QIROX : The system for automated welding and cutting.

QIROX : The system for automated welding and cutting. QIROX 217 QIROX : The system for automated welding and cutting. QIROX is the new CLOOS product brand comprising all solutions for automated welding and cutting. Due to its modular design, the QIROX system

More information

30AUTO Speed Lathe Manual

30AUTO Speed Lathe Manual 30AUTO Speed Lathe Manual Standard Features 3/4 HP Motor Air-Collet Closure 1800 RPM, Single Speed Electric Brake Cast Housing 5C Collets 3 Phase / 240 Volts DESCRIPTION: The Crozier Model 30AUTO Automotive

More information

TUR 6MN WITH LOADING CRANES. TUR 4MN 3000 x

TUR 6MN WITH LOADING CRANES. TUR 4MN 3000 x TUR 4MN 3000 x 22 000 TUR 6MN WITH LOADING CRANES This lathe, produced for American client, has a unique bed configuration. It consists of two independent beds mounted on a special foundation. This solution

More information

Hydraulic Clamp Carrier. Installation & Operation Manual

Hydraulic Clamp Carrier. Installation & Operation Manual Hydraulic Clamp Carrier Installation & Operation Manual Hydraulic Clamp Carrier Installation & Operation Manual Quick Machinery Company 8272 Peninsula Drive Kelseyville, CA 95451 phone: (707) 272-6719

More information

Orbital Milling. A Buyers Guide.

Orbital Milling. A Buyers Guide. A Buyers Guide www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence, maximising uptime and improving

More information

First published : May 1997 Fourth edition : January No

First published : May 1997 Fourth edition : January No First published : May 1997 Fourth edition : January 2006 No. 050153 INTRODUCTION Thank you for your purchasing Kansai Special's FX Series. Read and study this instruction manual carefully before beginning

More information

FlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company

FlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company FlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company The universal genius from RAIMANN: FlexiRip is synonymous with flexible ripping The original Jrion from Raimann stands for

More information

4. PRESS AND PRESS WORK

4. PRESS AND PRESS WORK 4. PRESS AND PRESS WORK Q. Which are the materials used for press work? GALVANISED IRON Zinc-coated iron is known as "galvanised iron"'. This soft steel sheet is popularly known as Gl sheet. Applications:

More information

GUILLOTINE SHEAR with REDUCER MODELS: S S S S S

GUILLOTINE SHEAR with REDUCER MODELS: S S S S S Industrivej 3-9 DK-9460 Brovst Denmark Tel.: + 45 9823 6088 Fax: + 45 9823 6144 MANUAL GUILLOTINE SHEAR with REDUCER MODELS: 1300-30S 1500-30S 2000-30S 2500-25S 3000-20S EC declaration of conformity Hereby

More information

PRO Brake Operating Instructions

PRO Brake Operating Instructions PRO Brake Operating Instructions Tapco Products Company P R O 9 a n d P R O B r a k e s PRO Brake System PRO Cut Off Gauge Simplifies cutting. PRO Cut-Off Quickly, safely, and easily makes factory quality

More information