TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL
|
|
- Kerrie Poole
- 5 years ago
- Views:
Transcription
1 CHAPTER 82 TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL Notes 1. Apart from blowlamps, portable forges, grinding wheels with frameworks, manicure and pedicure sets, and goods heading 8209, this chapter covers only articles with a blade, working edge, working surface or other working part : (a) base metal; (b) metal carbides or cermets; (c) precious or semi-precious stones (natural, synthetic or reconstructed) on a support base metal, metal carbide or cermet; or (d) abrasive materials on a support base metal, provided that the articles have cutting teeth, flutes, grooves, or the like, o f base metal, which retain their identity and function after the application the abrasive. 2. Parts base metal the articles this chapter are to be classified with the articles which they are parts, except parts separately specified as such and tool-holders for hand tools (heading 8466). However, parts general use as defined in Note 2 to Section XV are in all cases excluded from this chapter. Heads, blades and cutting plates for electric shavers or electric hair clippers are to be classified in heading Sets consisting one or more knives heading 8211 and at least an equal number articles heading 8215 are to be classified in heading
2 Preferential rates 8201 Hand tools, the following: spades, shovels, mattocks, picks, hoes, forks and rakes; axes, billhooks and similar hewing tools; secateurs and pruners any kind; scythes, sickles, hay knives, hedge shears, timber wedges and and other tools a kind used in agriculture, horticulture or forestry: Spades and shovels PCE CEFTA : 0 / MSA : Mattocks, picks, hoes and rakes Axes, billhooks and similar hewing tools Secateurs and similar one-handed pruners and shears (including poultry shears) Hedge shears, two-handed pruning shears and similar twohanded shears Other hand tools a kind used in agriculture, horticulture or forestry PCE CEFTA : 0 / MSA : Handsaws; blades for saws all kinds (including slitting, slotting or toothless saw blades): Handsaws Bandsaw blades - Circular saw blades (including slitting or slotting saw blades): With working part steel Other, including parts Chainsaw blades - Other saw blades: Straight saw blades, for working metal Other: For working metal For working other materials 8203 Files, rasps, pliers (including cutting pliers), pincers, tweezers, metal-cutting shears, pipe-cutters, bolt croppers, perforating punches and similar hand tools: 2
3 Preferential rates Files, rasps and similar tools Pliers (including cutting pliers), pincers, tweezers and similar tools Metal-cutting shears and similar tools Pipe-cutters, bolt croppers, perforating punches and similar tools 8204 Hand-operated spanners and wrenches (including torque meter wrenches but not including tap wrenches); interchangeable spanner sockets, with or without handles: - Hand-operated spanners and wrenches: Non-adjustable Adjustable Interchangeable spanner sockets, with or without handles CEFTA : 0 / MSA : Hand tools (including glaziers' diamonds), not elsewhere specified or included; blowlamps; vices, clamps and the like, other than accessories for and parts machine-tools or waterjet cutting machines; anvils; portable forges; hand- or pedaloperated grinding wheels with frameworks Drilling, threading or tapping tools CEFTA : 0 / MSA : Hammers and sledge hammers Planes, chisels, gouges and similar cutting tools for working wood Screwdrivers - Other hand tools (including glaziers' diamonds): Household tools Other: Tools for masons, moulders, cement workers, plasterers and painters Other Blowlamps Vices, clamps and the like 3
4 Preferential rates Other, including sets articles two or more subheadings this heading: Anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks Sets articles two or more subheadings this heading Tools two or more headings 8202 to 8205, put up in sets for retail sale 8207 Interchangeable tools for hand tools, whether or not poweroperated, or for machine tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving), including dies for drawing or extruding metal, and rock-drilling or earth boring tools: - Rock-drilling or earth-boring tools: With working part cermets Other, including parts: With working part diamond or agglomerated diamond Other Dies for drawing or extruding metal: With working part diamond or agglomerated diamond CEFTA : 0 / MSA : With working part other materials Tools for pressing, stamping or punching: For working metal Other Tools for tapping or threading: - - For working metal: Tools for tapping Tools for threading Other Tools for drilling, other than for rock-drilling: With working part diamond or agglomerated diamond - - With working part other materials: Masonry drills Other: For working metal, with working part: 4
5 Preferential rates Of cermets Of high speed steel Of other materials Other Tools for boring or broaching: With working part diamond or agglomerated diamond CEFTA : 0 / MSA : With working part other materials: Tools for boring: For working metal Other CEFTA : 0 / MSA : Tools for broaching: For working metal CEFTA : 0 / MSA : Other Tools for milling: - - For working metal, with working part Of cermets CEFTA : 0 / MSA : Of other materials: Shank type Other Other Tools for turning: - - For working metal, with working part: Of cermets CEFTA : 0 / MSA : Of other materials Other Other interchangeable tools: With working part diamond or agglomerated diamond - - With working part other materials: Screwdriver bits Gear-cutting tools CEFTA : 0 / MSA : Other, with working part: Of cermets: For working metal CEFTA : 0 / MSA : Other Of other materials: For working metal Other 8208 Knives and cutting blades, for machines or for mechanical appliances: 5
6 Preferential rates For metalworking For woodworking For kitchen appliances or for machines used by the food industry For agricultural, horticultural or forestry machines CEFTA : 0 / MSA : Other Plates, sticks, tips and the like for tools, unmounted, cermets: Indexable inserts Other Hand-operated mechanical appliances, weighing 10 kg or less, used in the preparation, conditioning or serving food or drink 8211 Knives with cutting blades, serrated or not (including pruning knives), other than knives heading 8208, and blades therefore: Sets assorted articles - Other: Table knives having fixed blades Other knives having fixed blades Knives having other than fixed blades Blades Handles base metal CEFTA : 0 / MSA : Razors and razor blades (including razor blade blanks in strips): Razors: Safety razors with non-replaceable blades PCE CEFTA : 0 / MSA : Other PCE CEFTA : 0 / MSA : Safety razor blades, including razor blade blanks in strips MIL CEFTA : 0 / MSA : Other parts 6
7 Preferential rates Scissors, tailors' shears and similar shears, and blades therefore 8214 Other articles cutlery (for example, hair clippers, butchers' or kitchen cleavers, choppers and mincing knives, paperknives); manicure or pedicure sets and instruments (including nail files): Paperknives, letter openers, erasing knives, pencil sharpeners and blades therefore Manicure or pedicure sets and instruments (including nail files) Other 8215 Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware: Sets assorted articles containing at least one article plated with precious metal: Containing only articles plated with precious metal CEFTA : 0 / MSA : Other: Of stainless steel Other Other sets assorted articles: Of stainless steel Other - Other: Plated with precious metal CEFTA : 0 / MSA : Other: Of stainless steel Other 7
ITC (HS), 2012 SCHEDULE 1 IMPORT POLICY CHAPTER 82 TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL
CHAPTER 82 NOTES: TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL 1. Apart from blow lamps, portable forges, grinding wheels with frameworks, manicure of pedicure
More informationUnit Drawback when cenvat facilities has not been availed Drawback Rate
Chapter No 82: Tools, Implements, Cutlery, Spoons and Forks, of Base Metal; Parts thereof of Base Metal Chapter Description of Goods Unit Drawback when cenvat facilities has not been availed Drawback Rate
More informationClass 8. Explanatory Note. Hand tools and implements (hand-operated); cutlery; side arms; razors.
Class 8 Hand tools and implements (hand-operated); cutlery; side arms; razors. Explanatory Note Class 8 includes mainly hand-operated implements used as tools in e respective professions. This Class includes,
More informationHYGIENIC AND BEAUTY IMPLEMENTS FOR HUMANS AND ANIMALS
Class 8 Hand tools and implements (hand-operated); cutlery; side arms; razors. Explanatory Note Class 8 includes mainly hand-operated implements used as tools in e respective professions. This Class includes,
More informationPrice list- catalogue goods
Hammers Hammer- machinist Machinist hammer 28/100 g 8590343002004 5,56 Machinist hammer 28/200 g 8590343002028 5,96 Machinist hammer 28/300 g 8590343002042 6,36 Machinist hammer 28/400 g 8590343002059
More informationTools for Plumbing. Introduction
2 Tools for Plumbing Introduction So far, we have studied the importance of plumbing system, its stages and the role and responsibilities of a plumber. We will now look at the various tools that help a
More informationIndex to General Catalogue i
Index to General Catalogue i Abbeydale Back Saws... D 12 Hand Saws... D 9 American Hay Rakes... A 7 Ring Poles... A 7 Axes, Granite......... Q 3 Back Saws....... D 11,12 ;, Abbeydale... D 12 Brass......
More informationASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
More informationTool ID. Team Score Format: A team shall be comprised of 4 members. The top 3 team members scores will count toward the final team score.
Tool ID Purpose: To develop the student s ability to correctly identify the names and uses of a variety of tools commonly used in the agricultural industry. Team Score Format: A team shall be comprised
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationFlat file. Round file. Hand file. Half -round. Mill file. Square file
Name Picture Cross section Uses: Cut pattern:: Hand file used for roughing and finishing. It has double cut teeth on two faces, single cut teeth on one edge, and one safe edge Flat file used for roughing
More informationASSIGNMENT 3. Textbook Assignment: 3-5. Which of the following types of hammers is used for driving and pulling nails?
ASSIGNMENT 3 Textbook Assignment: "Clamps," "Jacks," Hammers, Mallets, and Mauls," "Screwdrivers," "Manual Drills," "Screw and Tap Extractors," "Wrenches," "Chisels," and "Punches," chapters 19 through
More informationQuestion 1. Flat file. Half -round. Round file. Three square ( triangle ) Needle files. Page 1 of 46
Question 1 Name Picture Cross section Uses: Cut pattern:: Flat file Half -round Round file Three square ( triangle ) Needle files Page 1 of 46 Question 2 The graph shown below is the data collected for
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationTOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE
TOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE 1021 NO ITEM # DESCRIPTION QTY Item No: 199512 Hottest package deal from Toolway 1 199512 200 PC Picture Hanging Set 12 2 199512 2 PC
More informationperf india made economical items EYEGLASSES PE 2 SCREWDRIVERS PE 4 PIN VICES PE 6 DRAW PLATES PE 7 HAMMERS AND SAW FRAMES PE 8 HAND TOOLS PE 9
perf india made economical items EYEGLASSES PE 2 SCREWDRIVERS PE 4 PIN VICES PE 6 DRAW PLATES PE 7 HAMMERS AND SAW FRAMES PE 8 HAND TOOLS PE 9 CASE TOOLS PE 9 BRACELET TOOLS PE 13 VICES PE 14 CASE HOLDERS
More informationSAFETY, SAFETY, SAFETY
Key Points Safety considerations. Cost considerations. Basic Tools used in everyday model railroading. Advanced Tools used in model railroading. Optional Homemade Tools SAFETY, SAFETY, SAFETY This hobby
More informationEYEGLASSES SCREWDRIVERS PIN VICES AND DRAW PLATES
EYEGLASSES SCREWDRIVERS PIN VICES AND DRAW PLATES EYEGLASSES SCREWDRIVERS PIN VICES AND DRAW PLATES 111-1 10.0x 0.012 111-1.5 6.5x 111-2 5.0x 111-2.5 4.0x 111-3 3.5x 111-3.5 3.0x 111-4 2.5x Plastic eyeglass
More informationSouth Australian Historical Tool Association. Auction Catalogue
South Australian Historical Tool Association 21st March 2018 "Auction of Vintage Tools" Colonel Light Gardens RSL Auction Catalogue Conditions of Sale: 1. Bidders must be financial members of SAHTA Inc.
More informationFireFighterPrep Comprehensive Guide to Canadian Fire Service Exams
FireFighterPrep Comprehensive Guide to Canadian Fire Service Exams Copyright 2009 Dekalam Hire Learning Incorporated TOOLS Hammers Hammers are instruments used for pounding. For the most part they serve
More informationGUIDELINES FOR THE TRADE TANZANIA. Pre-shipment Verification of Conformity to Standards
GUIDELINES FOR THE TRADE TANZANIA Pre-shipment Verification of Conformity to Standards This data sheet has been prepared specifically in respect of exports to Tanzania Date issued : 24/04/2015 Last modification
More informationMACHINE TOOLS; METAL-WORKING NOT OTHERWISE PROVIDED FOR
XXXX B23 MACHINE TOOLS; METAL-WORKING NOT OTHERWISE PROVIDED FOR XXXX PLANING; SLOTTING; SHEARING; BROACHING; SAWING; FILING; SCRAPING; LIKE OPERATIONS FOR WORKING METAL BY REMOVING MATERIAL, NOT OTHERWISE
More informationProduct Overview. Electric Pneumatic Hydraulic. Concrete and Masonry Dust Collection Systems Hot Work Zone Tools
Electric Pneumatic Hydraulic Product Overview Metalworking Surface Finishing Surface Preparation Concrete and Masonry Dust Collection Systems Hot Work Zone Tools www.csunitec.com Metalworking In the shop
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationEspecially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
More informationMASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
More informationGardening. Sprayers/Rakes SPRAY - TRIGGER 500ML & 1 LITRE RAKE - LAWN STEEL FAN RAKE - LAWN RUBBER SPRAY - PRESSURE 1.25 LITRE
SPRAY - TRIGGER 500ML & 1 LITRE RAKE - LAWN STEEL FAN Versatile pressure sprayer for home and garden Adjustable nozzle provides a choice of single jet through to fine mist Trigger action for easy onehand
More informationBlower Cutter Jig Saw Circular Saw Circular Saw Drill High Speed Drill High Speed Drill Mixer Hammer Drill Hammer Drill Demolition Hammer
Index M00 M00 M0801K M0901 M0920 M0921 M1902 M2300 M2401Z M3600 M3601 M3700 Cutter Drill Power Planer Compound Miter Saw Portable Cut-off Router Router (Plunge type) Trimmer 08 08 M4000 M4101 M4301 M5801
More informationWORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Carpenter AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationSharpening - Knives - Scissors - Fishhooks - Garden Tools - Saw Blades SHARPENING
Sharpening - Knives - Scissors - ishhooks - Garden Tools - Saw Blades SHARPENING Proudly Distributed by: Camping arming ishing Gardening EZE-LAP Diamond products have been the pioneer and originator of
More informationCHAPTER 52 ELECTRICAL POWER TOOLS
CHAPTER 52 ELECTRICAL POWER TOOLS HOW TO CHOOSE AND USE THEM The Types and Uses pages provide you with a list of the electrical power tools found in the pioneer tool outfit. These pages should help you
More informationProf. Steven S. Saliterman Introductory Medical Device Prototyping
Introductory Medical Device Prototyping Department of Biomedical Engineering, University of Minnesota http://saliterman.umn.edu/ You must complete safety instruction before using tools and equipment in
More informationAffiliate: Richmond Tool Inventory As Of: 4/16/2018
Affiliate: Richmond Tool Inventory As Of: 4/16/2018 NOTE: The Total Inventory quantity does not reflect current tool type availability; please call the Richmond ToolBank at 804-301-0750 for more information.
More informationTIMTOS 2017 EXHIBITS PROFILE
TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes
More informationMACHINIST (3 Month Course) Revised May, 2009
GOVERNMENT OF THE PUNJAB TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY CURRICULUM FOR CURRICULUM FOR MACHINIST (3 Month Course) Revised May, 2009 CURRICULUM SECTION ACADEMICS DEPARTMENT 96-H, GULBERG-II,
More informationTool and Die Maker Level 2
Level 2 B2 Read and Interpret Drawings II Duration: 32 hours 32 hours 0 hours This unit of instruction introduces the Tool and Die Maker Apprentice with the knowledge and skills necessary to read and interpret
More informationHICKORY SAW & TOOL, INC.
HICKORY SAW & TOOL, INC. 406 9 th Street S.E., Hickory, N.C. 28602 P.O. Box 2407, Hickory, N.C. 28603 Telephone: (828) 324-5585 1-800-762-9899 Fax: (828) 324-5588 1-800-762-6845 www.hickorysawandtool.com
More informationIntroduction To Automotive Technology
Introduction To Automotive Technology UNIT 4: BASIc hand Tools LESSON 2: TYPES OF SCREWDRIVERS AND PLIERS I. Screwdrivers A. The standard screwdriver has a straight blade for turning screws with a slot
More informationNATIONAL CERTIFICATE (VOCATIONAL) ENGINEERING TECHNOLOGY NQF LEVEL 2 NOVEMBER 2010
NATIONAL CERTIFICATE (VOCATIONAL) ENGINEERING TECHNOLOGY NQF LEVEL 2 NOVEMBER 2010 (6021012) 24 November (X-Paper) 09:00 12:00 This question paper consists of 10 pages and 1 annexure. (6021012) -2- NC920(E)(N24)V
More informationThank you for considering "cutting edge technology."
Thank you for considering "cutting edge technology." Most woodworkers know that a shear cut is far better than a straight cut. They also know that a staggered cut is much better than just a single straight
More informationChapter 26 CHISELS HOW TO CHOOSE AND USE THEM TM 9-243
Chapter 26 CHISELS HOW TO CHOOSE AND USE THEM The Types and Uses section provides you with a list of some of the types of chisels. These pages should help you select the right chisel to do the job. The
More informationSheet Metal Tools. by:prem Mahendranathan
Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More informationTECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY
GOVERNMENT OF THE PUNJAB TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY CURRICULUM FOR FOR MACHINIST (6 Months Course) Revised May, 009 CURRICULUM SECTION ACADEMICS DEPARTMENT 96H, GULBERGII, LAHORE
More informationCharlotte Community ToolBank Master Inventory
To place a tool order, click here. To apply to be a member agency, click here. For more information on the ToolBank, please call us at 704.469.5800. Tool Type Category Subcategory Retail Value Quantity
More informationCCC Project Manual BUILDING MATERIALS
CCC Project Manual BUILDING MATERIALS Units of Measure and Conversions In this manual, you may see some shorthand notations for units of measure... 12 means 12 inches 10 means 10 feet 12 inches equals
More informationForce multipliers and speed multipliers Machines can make work easier by reducing the amount of force necessary to move an object or increasing the
MACHINES A machine is a device that makes work easier by transmitting or transforming energy. They have been used since ancient times to help people move heavy objects, bring substances like water from
More informationPergola. How To Build A. ***Safety First*** Please read the section on workplace safety at the end of this manual before proceeding with any work.
How To Build A Pergola ***Safety First*** Please read the section on workplace safety at the end of this manual before proceeding with any work. How To Build A Pergola Pergolas can be built to many different
More informationToolpost for HBM 290 lathe
Toolpost for HBM 290 lathe When I bought a new lathe it came with just a square toolpost so I had to use shims to get the tool to correct height. I decided to make a simple toolpost with tool-holders with
More informationMANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT V Machine Tools Milling cutters Classification of milling cutters according to their design HSS cutters: Many cutters like end mills, slitting cutters, slab cutters, angular
More informationCUTTER BLOCKS. Knives HSS & Carbide Tipped
C CUTTER BLOCKS Knives HSS & Carbide Tipped 185 UNIVERSAL TOOLHEAD High tensile steel body toolhead with 2 teeth Supplied with 12, 24 or 36 sets of solid HSS knives Custom profiled knives available on
More informationSET CM.160A WITH 8-DRAWER ROLLER CABINET JET.8GM3 AND CHEST JET.C4GM3
SET CM.160A WITH 8-DRAWER ROLLER CABINET JET.8GM3 AND CHEST JET.C4GM3 : Weight: 239 kg. Qty JET.8GM3 1 JET+ 8-drawer roller cabinets - 3 modules per drawer JET.C4GM3 1 JET+ 4-drawer chest - 3 modules per
More information53932 Wood Boring Bit, 78" Features. Descriptions. Manufacturer Information. Taxonomies, Classifications, and Categories.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 53932 Wood Boring Bit, 78" Klein Tools Catalog Number 53932 Manufacturer Klein Tools Weight per unit 0.3500 (lbs/each)
More informationIndustrial Tools and Equipments
Industrial Tools and Equipments www.arabigsis.com Serving the industry for over 30 years Industrial Tools Industrial Tools is the flagship division of the company representing various leaders in Industrial
More informationElectrical Construction Name:
Tools of the Trade The following are common tools that are used in the electrical industry. This hand-out is to help familiarize you with the tools, the terminology, and their use. Retractable Steel tape
More informationJOB QUALIFICATION STANDARD (JQS)
Occupation: Work Process: Maintenance Mechanic Machine Shop Practical Hours: 250 hrs. JOB QUALIFICATION STANDARD (JQS) DOL Standard: Manual Machining Fundamentals: Apply a working knowledge of metal removal
More informationWASSCE / WAEC FURNITURE MAKING SYLLABUS
WASSCE / WAEC FURNITURE MAKING SYLLABUS WWW.LARNEDU.COM Visit www.larnedu.com for WASSCE / WAEC syllabus on different subjects and more great stuff to help you ace the WASSCE in flying colours. SCHEME
More informationTHE BLADESHARPENER OWNERS MANUAL
THE BLADESHARPENER OWNERS MANUAL Photo shows knife in 100mm flip over. All parts will interchange. Note: Wedge attachment left of photo and sharpening stones are not included. 1 BLADESHARPENER WITH FLIPOVER
More information100mm (3in) Slide Stop Cut to 6mm (1/4in) Sections. Quantity: mm (10in) Skewers Quanity: 10. Material to Lift. Material for Blades.
Wind Lift Page 1 The Activity This guide will take you through the process of creating a wind powered lift. You ll start by creating the stand. The lift mechanism, hub and blades are then added. Before
More informationBUTCHER KNIVES & ACCESSORIES
BUTCHER KNIVES & ACCESSORIES linoleum knife 205 pp - 7 * $43.00 8 Breaking Knife * 2005-20 * * * $49.00 8 Breaking Knife 2005-22 * * * $52.00 8 Breaking Knife 2005-25 * * * $56.00 8 scalloped edge 2005
More informationDrive Sockets Wrenches Axle Stands Torches Sealants Electric Hand Tools Sealers Page 33
Tools Drive Sockets Wrenches Axle Stands Torches Sealants Electric Hand Tools Sealers Page Battery Charger Page Torch Page Compressor Page Jacks Page Sockets Page 0 Socket Tester Page Contents Page Tools:
More informationSharpening From Wikipedia, the free encyclopedia
Page 1 of 7 Sharpening From Wikipedia, the free encyclopedia Sharpening is the process of creating or refining a sharp edge of appropriate shape on a tool or implement designed for cutting. Sharpening
More informationD E S I G N A N D M A N U F A C T U R E : C O U R S E M A T E R I A L
UNIT D E S I G N A N D M A N U F A C T U R E : C O U R S E M A T E R I A L metalwork processes Screw Threads The screw thread is a very important detail in engineering. It is used to hold parts together.
More informationTOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
More informationFITTING INTRODUCTION:
FITTING INTRODUCTION: Machine tools are capable of producing work at a faster rate, but there are occasions when components are processed at the bench. Sometimes it becomes necessary to replace or repair
More informationFlame. Tree Pointed. Product Barcode Price Ø Length Shank Code
Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate
More informationSimple Machines. Grade Level: 1-4
Simple Machines Grade Level: 1-4 Teacher Guidelines Instructional Pages Activity Page Practice Page Homework Page Answer Key pages 1 2 pages 3 4 pages 5 page 6 page 7 page 8 9 Classroom Procedure: Approximate
More informationMatch the tool with its name.
Handyperson Special Index Activity Page Match the tool with its name. Hammer Drill Nail Screw Nut Level Ladder Pliers Wrench Screwdriver Measuring Tape Tool Time Word Search BOARD BOLT BRICK CEMENT CONSTRUCTION
More informationWorkshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292
More informationMachinist NOA (2010) Subtask to Unit Comparison
Machinist NOA (2010) Subtask to Unit Comparison NOA Subtask Task 1 Organizes work. 1.01 Interprets documentation. A16 Job Planning 1.02 Plans sequence of operations. A16 Job Planning 1.03 Maintains safe
More informationSTATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK
STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MECH 121 - MANUFACTURING PROCESSES I Prepared By: Daniel Miller Updated By: Daniel Miller (April 2015) CANINO SCHOOL OF
More informationCarBee-Sharp. Construction
CarBee-Sharp Congratulations on your purchase of the new CarBee-Sharp multi-head pocket carbide sharpener. CarBee-Sharp is the most convenient sharpener you will ever own. CarBee-Sharp is so small and
More informationIncludes any products that may be described/observed as a small pointed hand tool used for piercing holes in leather, wood, and other materials.
Brick 10003490: Awls Includes any products that may be described/observed as a small pointed hand tool used for piercing holes in leather, wood, and other materials. Excludes products such as punches.
More information[DOC] WHAT KIND OF DRILL BIT FOR METAL
14 January, 2018 [DOC] WHAT KIND OF DRILL BIT FOR METAL Document Filetype: PDF 283.94 KB 0 [DOC] WHAT KIND OF DRILL BIT FOR METAL I'm not sure what type of bolt it is since I. With metal studs gaining
More informationNew Lineup H.O.: Makita Power Tools India Pvt. Ltd. Makita Service Centre: Chennai: Cochin: Delhi: Kolkata: Pune:
New Lineup 2018 CATALOGUE 2 Index 4- Belt Sander Blower Circular Saw Cutter 4 Demolition Hammer Die Grinder Drill/Hammer Drill 2- Finishing Sander Jig Saw Mixer Portable Cut-off 4 Power Planer Random Orbit
More informationProudly Distributed by: EZE LAP. Diamond Sharpeners
Proudly Distributed by: EZE LAP Diamond Sharpeners EZE LAP Diamond Products Camping arming ishing Gardening EZE-LAP Diamond products have been the pioneer and originator of diamond sharpeners since the
More informationApril 2018 Edition STANDARD DUTY
April 2018 Edition STANDARD DUTY INDUSTRIAL POWER TOOLS Index Angle Grinder 4 Belt Sander 4 Blower 6 Circular Saw 5 Compound Mitre Saw 5 Demolition Hammer 3 Drill 3 Jig Saw 5 Finishing Sander 4 Rotary
More informationMANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT III THEORY OF METAL CUTTING Broad classification of Engineering Manufacturing Processes. It is extremely difficult to tell the exact number of various manufacturing processes
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationHYDRAULIC UNIVERSAL AND TOOL GRINDING MACHINE. a quality product built for sustained accuracy lasting performance
D HYDRAULIC UNIVERSAL AND TOOL GRINDING MACHINE a quality product built for sustained accuracy lasting performance MANEX HYDRAULIC UNIVERSAL AND TOOL GRINDING MACHINES Mod. No. 1 - No. - No. 3 Standardized
More informationSPECIALIZED WATCH MAKING TOOLS 03 2 LATHES RIVETING STAKES 03 20
03 SPECIALIZED WATCH MAKING TOOLS 03 2 LATHES 03 12 RIVETING STAKES 03 20 SPECIALIZED WATCH MAKING TOOLS i Tools for locking/unlocking oscillating weight bolts. S Cal. 2892 and 7750 For calibres Base holder
More informationU.S. Census Bureau Metalworking Machinery MQ333W(08)-5 Issued August 2009
U.S. Census Bureau Metalworking Machinery - 2008 MQ333W(08)-5 Issued August 2009 Address inquiries concerning these data to Investment Goods Industries Branch, U.S. Department of Commerce, Census Bureau,
More informationGUIDELINES FOR THE TRADE TANZANIA. Pre-shipment Verification of Conformity to Standards
GUIDELINES FOR THE TRADE TANZANIA Pre-shipment Verification of Conformity to Standards This data sheet has been prepared specifically in respect of exports to Tanzania Date issued: 24/04/2015 Last modification:
More informationTechnical Training USG Saw Chain Grinder
Technical Training USG Saw Chain Grinder 1 USG HOS The STIHL USG Universal Sharpener will sharpen all types of saw chain. This is by far the most versatile and accurate machine of its type on the market.
More informationCARPENTRY. Carpentry tools: The following are the tools that are made use of in all the wood working operations.
CARPENTRY INTRODUCTION: Carpentry may be defined as the process of making wooden components. It starts from a marketable form of wood and ends with a finished product. It Deals with the building work,
More informationModule One: Non Powered Hand Tools
Module One: Non Powered Hand Tools What is included in this module Why are we learning this? Safety rules Right tool for the right job Identity of Tools Hands on time Quiz Why are we here? Basic knowledge
More informationProfessional Power Tools & Accessories
Professional Power Tools & Accessories NEW Engine and outputs sold separately. 6.5HP 3L 20cm Ø 3150min -1 2.4KW (50Hz) 10.5A (230V) 21A (110V) 230V (16A) BS4343 AC 175 Bar 6m 8L / in 1L Powered by 75mm
More informationVIEWING OPTIONS: In Adobe PDF Viewer, from the main toolbar choose View, then Page Display, turn on Two-Up and Show Cover Page During Two-Up
VIEWING OPTIONS: To make our catalog easier to read we recommend using a two page display, as some sections have one page for the exploded view and one for the parts listing. Changing these settings will
More informationComplete line of Holemaking Products and Accessories
Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related
More informationLesson C6 1. Using Hand Tools. Pathway Strand: Power, Structural and Technical Systems
Lesson C6 1 Using Hand Tools Unit C. Nursery, Landscaping, and Gardening Problem Area 6. Using and Maintaining Tools and Equipment Lesson 1. Using Hand Tools New Mexico Content Standard: Pathway Strand:
More informationNEW! Tool Trays for Roller Cabinets and Top Chests
NEW! Tool Trays for Roller Cabinets and Top Chests Tool Sets with Foam Organizers for Wide Drawers D096001-FT1T 1/4 Dr., 3/8 Dr. & 1/2 Dr. Sockets & Attachments 2, 4 & 6 1/4 Dr. Extensions, 1/4 Dr. Hand
More informationErnest Bennett Saws Price List
Ernest Bennett Saws Price List 2015 Contents Circular Saws Rip saws 3 Anti-kick rip saws 3 Spring set plate saws 4 General cross cut saws 4 Negative hook cross cut saws 5 Construction saws 5 Universal
More informationESL - DESIGN AND TECHNOLOGY / TECHNICS HANDTOOL IDENTIFICATION AND TERMINOLOGY
ESL - DESIGN AND TECHNOLOGY / TECHNICS HANDTOOL IDENTIFICATION AND TERMINOLOGY One of the biggest difficulties in teaching ESL students practical skills is the lack of exposure to related technology and
More informationPOWER TOOL ACCESSORIES PROMOTION
POWER TOOL ACCESSORIES PROMOTION BUY $100 in Accessories Any Mix & GET a $2 DRIVEKORE Gift Card GET a $2 DRIVEKORE Gift Card Offer available on all in stock accessories and any special order accessories.
More information8.10 Drill Grinding Device
8.10 Drill Grinding Device Special Accessories 1. Introduction Device can accurately grind precision drill and tools, this drill grinding machine system consists of a motor and grinding wheel head composed
More informationHAND CUTTING TOOLS; CUTTING; SEVERING
XXXX B26 HAND CUTTING TOOLS; CUTTING; SEVERING XXXX HAND-HELD CUTTING TOOLS NOT OTHERWISE PROVIDED FOR (for harvesting A01D; for horticulture, for forestry A01G; for butchering or meat treatment A22; for
More informationtool Accessory Catalogue 2011
tool Accessory Catalogue 2011 NEW Hand Tools Also Inside Saint John Moncton Dartmouth Halifax Sydney 331 Chelsey Dr. 320 Edlinburgh Dr. Akerley Blvd. 3630 Strawberry Hill 397 George St. Toll Free: 1-888-846-7637
More informationKTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8" Descriptions Description STEP DRILL BIT #14 DOUBLE-FLUTED, 3/16 TO 7/8"
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 KTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8" Klein Tools Catalog Number Manufacturer Weight per unit Product
More informationTOOLS OR BENCH DEVICES NOT OTHERWISE PROVIDED FOR, FOR FASTENING, CONNECTING, DISENGAGING OR HOLDING
B25B TOOLS OR BENCH DEVICES NOT OTHERWISE PROVIDED FOR, FOR FASTENING, CONNECTING, DISENGAGING OR HOLDING Vices Hand vices; Pin vices Clamps Pliers; gripping tools with jaws on pivoted limbs Hand-held
More information