Includes any products that may be described/observed as a small pointed hand tool used for piercing holes in leather, wood, and other materials.
|
|
- Beatrice Jones
- 5 years ago
- Views:
Transcription
1 Brick : Awls Includes any products that may be described/observed as a small pointed hand tool used for piercing holes in leather, wood, and other materials. Excludes products such as punches. Type of Blade ( ) Attribute Indicate, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the identifying characteristic of the tool blade. Attribute Values ROUNDED BLADE ( ) SQUARED BLADE ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Page 1 of 101
2 Brick : Awls/Punches/Nailsets Variety Packs Includes any products than can be described/observed as two or more distinct Awls Punches or Nailsets sold together, which exist within the schema belonging to different bricks but to the same class, that is two or more products contained within the same pack which cross bricks within the Awls / Punches / Nailsets class. Includes products such as Awls and Punches sold together. Items that are received free with purchases should be removed from the classification decision making process. Excludes products such as Hammer and Nailset variety packs. Page 2 of 101
3 Brick : Nailsets/Countersinks Includes any products that may be described/observed as a small shaft of metal, a few inches long, with one end round or square and one tapered to a point. The tapered point is usually blunt, but on some models is concave, or cupped, to hold nail heads. Includes products such as countersinks 1/32 inch. Excludes products such as centre punches and awls. Page 3 of 101
4 Brick : Punches Includes any products that may be described/observed as a tool made of hardened steel used to decorate, texture and form metal as well as punch clean holes through a surface. Excludes products such as stationery hole punches and awls. Page 4 of 101
5 Brick : Carrying/Lifting/Climbing Equipment Replacement Parts/Accessories Includes any products that can be described/observed as a replacement part, or an accessory for carrying, lifting or climbing equipment. Excludes complete carrying, lifting and climbing products. Page 5 of 101
6 Brick : Hand Trucks/Dollies Includes any products that may be described/observed as a handcart that has a frame with two low wheels and a ledge at the bottom, used to move crates or other heavy objects. Excludes products such as Wheelbarrows and Suction Lifters. Number of Wheels ( ) Attribute Indicates with reference to the product branding, labelling or packaging, the descriptive term that is used to identify the number of wheels attached to a product. Attribute Values 2 ( ) 3 ( ) 4 ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Type of Material ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the type of material from which the product is made. Attribute Values METAL ( ) STONE ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) WOOD ( ) Page 6 of 101
7 Brick : Ladders Includes any products that may be described/observed as a vertical set of steps. Ladders consist of two parallel side pieces which are connected by a series of rungs or crosspiece that are used for climbing up and down to gain access to otherwise inaccessible areas. Includes products such as step stools and extension ladders as well as step ladders Excludes products such as platforms and scaffolding. Type of Ladder ( ) Attribute Indicate, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the functionality type of the ladder. Attribute Values LADDERS EXTENSION ( ) LADDERS FOLDING ( ) LADDERS STEP LADDERS ( ) LADDERS STEP STOOLS ( ) LADDERS STRAIGHT ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Page 7 of 101
8 Brick : Platforms/Scaffolding Includes any products that may be described/observed as a temporary structure of metal pipes and wooden planks that provide an elevated platform for both workers and materials during the construction of a building. Excludes products such as platform ladders and step ladders. Type of Platforms/Scaffolding ( ) Attribute Indicate, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify whether the product is a fixed raised platform or parts used to create a scaffolding structure. Attribute Values PREFABRICATED PLATFORM ( ) SCAFFOLDING PART ( ) Page 8 of 101
9 Brick : Pulleys and Belt Drives Includes any products that may be described/observed as a device for lifting and lowering weights, consisting of a wheel with a grooved rim over which a rope or belt runs. Excludes products such as Dolleys, Rollers, Wheelbarrows and Suction Lifters and Pulleys that are specifically designed for trekking and mountaineering. Page 9 of 101
10 Brick : Suction Lifters Includes any products that may be described/observed as a hand tool that creates a partial vacuum, or region of low pressure fixing the tool to the surface of that which is to be transported. This method of carrying, lifting and positioning can be used on such surfaces as marble, glass and other sheet material. Excludes products such as other hand held lifting tools. Number of Suction Cups ( ) Attribute Indicate, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the number of suction pads the suction lifter uses to lift awkward items. The more suction pads the more control the user will have over large, bulky items. Attribute Values 1 SUCTION CUP ( ) 2 SUCTION CUPS ( ) 3 SUCTION CUPS ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Page 10 of 101
11 Brick : Wheelbarrows Non Powered Includes any products that may be described/observed as a cart for carrying small loads, which has handles and one or more wheels. Excludes products such as trolleys, hand trucks, garden tractors. Number of Wheels ( ) Attribute Indicates with reference to the product branding, labelling or packaging, the descriptive term that is used to identify the number of wheels attached to a product. Attribute Values 1 ( ) 2 ( ) 3 ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Type of Material ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the type of material from which the product is made. Attribute Values METAL ( ) PLASTIC ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) WOOD ( ) Page 11 of 101
12 Brick : Chisels Includes any products that may be described/observed as a hand tool used for carving and/or cutting a hard material such as wood or stone or metal. A Chisel is typically made of hardened or tempered steel. A Chisel consists of a sharpened end (called the blade) attached to a straight handle. The handle and blade of some types of chisels are made in one piece. Includes products such as Masonry Chisels and Wood Chisels. Excludes products such as Gouges. Type of Chisel ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the trade application and therefore the material surface the chisel is deigned to be used upon. Attribute Values MASONRY ( ) METAL ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) WOOD ( ) Page 12 of 101
13 Brick : Chisels/Gouges Variety Packs Includes any products than can be described/observed as two or more distinct Chisels or Gouges sold together, which exist within the schema belonging to different bricks but to the same class, that is two or more products contained within the same pack which cross bricks within the Chisels / Gouges class. Includes products such as Chisels and Gouges sold together. Items that are received free with purchases should be removed from the classification decision making process. Excludes products such as Files and Chisels variety packs. Page 13 of 101
14 Brick : Gouges Includes any products that may be described/observed as a chisel type cutting implement having a long, curved blade; used for hollowing out wood, or for making holes, channels, or grooves in wood. Excludes products such as awls, punches. Page 14 of 101
15 Brick : Crowbars/Pry Bars Includes any products that may be described/observed as a heavy iron lever with one end forged into a wedge designed to widen openings. Excludes products such as chisels. Page 15 of 101
16 Brick : Nail Pullers Includes any products that may be described/observed as a hand held tool for extracting nails from surfaces. Excludes products such as nail guns. Page 16 of 101
17 Brick : Nut Splitters Includes any products that may be described/observed as a tool for splitting nuts. Excludes products such as screw extractors. Page 17 of 101
18 Brick : Screw Extractors Includes any products that may be described/observed as a tool for extracting screws. Excludes products such as nail pullers. Page 18 of 101
19 Brick : Drilling Replacement Parts/Accessories Includes any products that may be described/observed as replacement parts for Drilling products. Includes products such as replacement drill bits. Excludes products such as complete Drilling products. Page 19 of 101
20 Brick : Drills Non Powered Includes any products that may be described/observed as a non powered tool with a sharp point and cutting edges for making holes in wood and metal materials by rapid rotation. Includes products such as brace and bits as well as metal working drills. Excludes products such as powered drills and tappers. Material of Target Surface ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the material of the surface on which the product should be used. Attribute Values METAL ( ) STONE ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) WOOD ( ) Page 20 of 101
21 Brick : Paint Application Accessories Includes any products that may be described/observed as an item used to enhance the process of Painting. These products are designed to make the process of Painting easier for the user and are additional to the essential supplies required. Includes products such as Paint Pails, Pant Can Openers, Paint Can Shakers, Paint Roller Trays and Paint Stencils. Excludes products such as Paint Applicators Powered and Paint Applicators Non Powered as well as Painting Replacement Parts. Type of Paint Application Accessory ( ) Attribute Indicate, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the product used to accessorise the application paint within a consumer environment. Attribute Values PAINT BRUSH/ROLLER EXTENSION/TELESCOPIC POLE ( ) PAINT CAN OPENER ( ) PAINT CAN SHAKER ( ) PAINT GUARD ( ) PAINT MIXER/BLENDER ( ) PAINT PAIL ( ) PAINT ROLLER COVER ( ) PAINT STENCIL ( ) PAINT TRAYS ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Page 21 of 101
22 Brick : Paint Applicators Non Powered Includes any products that may be described/observed as a non powered tool specifically designed for the controlled application of paint to a surface, within a household environment. These products take various forms allowing for the most efficient application of paint to a surface. Includes products such as Paint Brushes, Paint Mitts and Paint Pads as well as Paint Corner Tools. Excludes products such as Paint Applicators Powered and Artists Painting Implements. Type of Material ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the type of material from which the product is made. Attribute Values METAL ( ) PLASTIC ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) WOOD ( ) Type of Paint Applicator Non-Powered ( ) Attribute Indicate, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the type of non powered applicator with which to apply household paint. Attribute Values PAINT BRUSH ( ) PAINT CORNER TOOL ( ) PAINT EDGER ( ) PAINT MITT ( ) PAINT PAD ( ) PAINT ROLLER ( ) PAINT SPRAYER (NON POWERED) ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Page 22 of 101
23 Brick : Painting Replacement Parts Includes any products that may be described/observed as an item designed to enhance the performance or appearance of Painting products through the replacement of a particular part or mechanism. Includes products such as Edger Replacement Pads, Paint Brush/Roller Replacement Handles. Excludes products such as Paint Application Accessories including Paint Pails, Paint Mixers, Paint Trays, Paint Stencils as well as Paint Applicators Powered and Paint Applicators Non Powered. Type of Painting Replacement Part ( ) Attribute Indicate, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the type of replacement part essential for the correct functionality of the painting product in question. Attribute Values EDGER PAD ( ) PAINT BRUSH HANDLE ( ) PAINT ROLLER FRAME ( ) ROLLER HANDLE ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Page 23 of 101
24 Brick : Plaster Hawks Includes any products that may be described/observed as a square board with a handle underneath used to hold or carry plaster. Excludes products such as palettes. Page 24 of 101
25 Brick : Putty/Wallboard Knives Includes any products that may be described/observed as a flat bladed instrument designed for spreading putty or other substances. Excludes products such as kitchen knives and artists' knives. Page 25 of 101
26 Brick : Wall/Ceiling Covering Tools Non Powered Includes any products that may be described/observed as a non powered implement specifically used on walls and ceilings, to aid the user in applying or removing a particular covering. Includes products such as Manual Wallpaper Strippers. Excludes products such as Powered Tools as well as Hand held Tools that are not specifically designed for the specific purpose of wall or ceiling covering manipulation. Page 26 of 101
27 Brick : Funnels (DIY) Includes any products that may be described/observed as a conical utensil having a small hole or narrow tube at the apex, which is used to channel the flow of a substance such as oil or paint into a small mouthed container. Excludes products such as food funnels. Type of Material ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the type of material from which the product is made. Attribute Values METAL ( ) PLASTIC ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Page 27 of 101
28 Brick : Grinders (Non Powered) Includes any products that may be described/observed as a machine that processes materials by grinding or crushing. Excludes products such as powered grinders or sharpeners. Page 28 of 101
29 Brick : Honing Guides Includes any products that may be described/observed as a tool to guide a honing process. Excludes products such as grinders. Page 29 of 101
30 Brick : Scrapers Includes any products that may be described/observed as a hand tool for scraping surfaces. Excludes products such as planes. Page 30 of 101
31 Brick : Tool Sharpeners (Non Powered) Includes any products that may be described/observed as a tool to make an edge sharper. Excludes products such as stationery sharpeners. Page 31 of 101
32 Brick : Anvils (DIY) Includes any products that may be described/observed as a heavy block of iron or steel on which hot metals are shaped by hammering. Excludes products such as benches and saw horses. Page 32 of 101
33 Brick : Hammers (DIY) Includes any products that may be described/observed as a hand tool meant to deliver blows to a target, causing it to move or deform. The most common uses are for driving nails, fitting parts, and breaking up objects. Hammers are often designed for a specific purpose, and so their design varies quite a lot. Usual features are a handle and a head, with the balance firmly in the head. The head is composed of a flat, striking surface on one end, and a peen on the other. The peen can be shaped like a claw or wedge to pull nails, or like a ball as in the ball peen hammer. Specifically excludes mallets. Excludes products such as hatchets and anvils. Head Configuration ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the set up of the hammer head. Attribute Values BALL PEIN ( ) CLAW ( ) CROSS PEIN ( ) SLEDGEHAMMER ( ) TACK ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Trade Application ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the trade for which the hammer is designed. Attribute Values BRICK LAYERS ( ) CARPENTERS ( ) FARRIERS ( ) JEWELLERS ( ) MACHINIST ( ) SCUTCHING ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) WELDERS ( ) Page 33 of 101
34 Brick : Hammers/Mallets/Hatches Replacement Parts/Accessories Includes any products that may be described/observed as a replacement part, or accessory, for hammers, mallets or hatchets Excludes products such as complete hammers, hatchets or mallets. Page 34 of 101
35 Brick : Hammers/Mallets/Hatchets Variety Packs (DIY) Includes any products than can be described/observed as two or more distinct Hammers, Mallets or Hatchets sold together, which exist within the schema belonging to different bricks but to the same class, that is two or more products contained within the same pack which cross bricks within the Hammers / Mallets / Hatchets class. Includes products such as Hammers and Mallets sold together. Items that are received free with purchases should be removed from the classification decision making process. Excludes products such as Hammers and Punches variety packs. Page 35 of 101
36 Brick : Hatchets (DIY) Includes any products that may be described/observed as a tool with a metal blade that is securely fastened at a 90 degree angle to a short handle. This single bitted axe is designed for use by one hand and is typically used for cutting through the grain of wood or removing branches from a piece of wood, though a specially designed hatchet is a common tool in the construction of roofs. Excludes products such as hammers and mallets. Page 36 of 101
37 Brick : Mallets (DIY) Includes any products that may be described/observed as a tool similar in form to that of a hammer but with heads made of softer materials than the steel normally used in a hammerhead so as to avoid damaging a delicate surface. Some common mallet head materials include rubber, wood, rawhide and plastic. Includes products such as split head (interchangeable head material) and dead blow mallets. Excludes products such as hatchets and anvils. Specifically excludes hammers. Head Configuration ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the set up of the hammer head. Attribute Values ROUND ( ) SPLIT HEAD ( ) SQUARE ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Head Material ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the material of the hammer head. Attribute Values COPPER ( ) LEATHER ( ) PLASTIC ( ) RAWHIDE ( ) RUBBER ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) WOOD ( ) Page 37 of 101
38 Brick : Knife Blades Non Powered (Hobby/Utility) Includes any products that can be described/observed as a separate blade for a knife used in relation to home improvement. The blade will be specific to the material it is intended to cut and the type of knife to which it will be attached. Includes products such as hobby knife blades. Excludes products such as blades for kitchen knives and hand saws as well as any powered cutting implement. Page 38 of 101
39 Brick : Knives Non Powered (Hobby/Utility) Includes any products that may be described/observed as a tool with a blade, sometimes disposable, that is used in various trades and crafts for a variety of purposes. Includes products such as carpet trimmers and knives used to cut vinyl sheets and vinyl tiles. Excludes products such as putty knives and kitchen knives. If with Retractable Blade ( ) Attribute Indicate, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify whether the product has a blade that can be retracted for safety purposes. Attribute Values NO ( ) UNIDENTIFIED ( ) YES ( ) Multi-position Knife Blade ( ) Attribute Indicate, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify whether the blade of the knife can be fixed in a variety of positions to aid cutting. Attribute Values NO ( ) UNIDENTIFIED ( ) YES ( ) Page 39 of 101
40 Brick : Knives Non Powered Replacement Parts/Accessories Includes any products that can be described/observed as replacement parts and accessories for knives used for the purpose of home improvement. Excludes products such as complete hobby/utility knives. Page 40 of 101
41 Brick : Caulking Guns (Non-Powered) Includes any products that may be described/observed as a tool for expelling caulk from a tube. A caulking gun enables a "bead" of material to be applied to cracks and seams. Includes any products that may be described/observed as a hand tool specifically designed for treatment of joints in masonry or glass frames by filling them with mortar to improve appearance or protect against weather. Excludes power tools and all other Pointed Tools. Page 41 of 101
42 Brick : Cutters Glass (Non Powered) Includes any products that may be described/observed as a tool specifically designed for cutting glass. Excludes products such as tile cutters. Page 42 of 101
43 Brick : Cutters/Nibblers Tiles (Non Powered) Includes any products that may be described/observed as a tool specifically designed for cutting ceramic tiles Excludes products such as pipe cutters, bolt cutters as well as sheet metal nibblers. Page 43 of 101
44 Brick : Masonry Trowels Includes any products that may be described/observed as a pointed hand tool specifically designed for treatment of joints in masonry by filling them with mortar to improve appearance or protect against weather. Excludes products such as display pointers and Caulking Guns. Page 44 of 101
45 Brick : Smoothers/Floats Includes any products that may be described/observed as a hand tool with a flat face used for smoothing and finishing the surface of plaster or cement or stucco. Excludes products such as Surface Forming Tools. Page 45 of 101
46 Brick : Bevel Gauges Includes any products that may be described/observed as an adjustable gauge for setting and transferring angles. The handle is usually made of wood or plastic and is connected to a metal blade with a thumbscrew or wing nut. The blade pivots and can be locked at any angle by loosening or tightening the thumbscrew. Excludes products such as compasses, callipers and protractors. Page 46 of 101
47 Brick : Callipers (DIY) Includes any products that may be described/observed as a manual measuring instrument for measuring the distance between two points. Excludes products such as measuring wheels, compasses and rulers. Page 47 of 101
48 Brick : Dividers/Compass (DIY) Includes any products that may be described/observed as an instrument for drawing and measuring circles, consisting of two legs connected at one end by a movable joint. Excludes products such as stationery compasses and callipers. Page 48 of 101
49 Brick : Levels Includes any products that may be described/observed as a measuring instrument for achieving exact level surfaces, whether horizontal or vertical. These products usually take the form of a ruler like item fitted with a liquid capsule in which a bubble indicates gradient. Includes products such as spirit levels. Excludes products such as plumb bobs and laser levels. Page 49 of 101
50 Brick : Marking Chalks/String Lines Includes any products that may be described/observed as a powdered chalk together with a spool of string that is used to mark construction projects and building sites as well as solid chalk used on its own. Includes products such as fine powdered chalk to be used with a string line and hard shaped chalk. Excludes products such as marking pencils and crayons. Type Of Marking Chalk ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the type of marking chalk. Attribute Values HARD SHAPED ( ) POWDER/STRING UNCLASSIFIED ( ) ( ) UNIDENTIFIED ( ) Page 50 of 101
51 Brick : Measuring Wheels Includes any products that may be described/observed as an analogue measuring instrument in the shape of a wheel, which can be run along distances to measure them accurately and quickly. Excludes products such as tape measures. Analog/Digital ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify whether the product is analog or digital. Attribute Values ANALOG ( ) DIGITAL ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Page 51 of 101
52 Brick : Micrometers Includes any products that may be described/observed as a precision measuring instrument that is accurate to the nearest.001 of an inch or.01 mm. These products may be digital or analogue. Excludes products such as rulers and tape measures. Analog/Digital ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify whether the product is analog or digital. Attribute Values ANALOG ( ) DIGITAL ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Page 52 of 101
53 Brick : Pencils/Crayons (DIY) Includes any products that may be described/observed as a pointed stick or pencil of coloured clay, chalk and wax specifically designed for use by carpenters. Excludes products such as crayons designed for artists' use. Page 53 of 101
54 Brick : Plumb Bobs Includes any products that may be described/observed as a pointed metal weight with a string used to determine vertical alignment. Excludes products such as spirit levels. Page 54 of 101
55 Brick : Rulers (DIY) Includes any products that may be described/observed as a measuring instrument consisting of a strip of wood or metal or plastic with a straight edge marked with units of measurement that is used for drawing straight lines and measuring lengths. Excludes products such as rulers used as stationary as well as spirit levels. If Folding ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify whether or not the product is foldable. Attribute Values NO ( ) UNIDENTIFIED ( ) YES ( ) Type of Material ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the type of material from which the product is made. Attribute Values METAL ( ) PLASTIC ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) WOOD ( ) Page 55 of 101
56 Brick : Squares (DIY) Includes any products that may be described/observed as a measuring instrument for achieving exact right angles. Excludes products such as rulers. Page 56 of 101
57 Brick : Tape Measures (DIY) Includes any products that may be described/observed as a measuring instrument consisting of a narrow strip of cloth or metal marked in inches or centimetres and used for measuring lengths. Includes products with a digital interface. Excludes products such as rulers. Analog/Digital ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify whether the product is analog or digital. Attribute Values ANALOG ( ) DIGITAL ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) If with Case ( ) Attribute Indicate, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify whether the product has a case to protect it from scratches whilst in use. Attribute Values NO ( ) UNIDENTIFIED ( ) YES ( ) Page 57 of 101
58 Brick : Hammer Tacker Non Powered Includes any products that may be described/observed as a hand held machine used for fastening house wrap, insulation and roofing felt in position. Excludes products such as staplers. Target Use/Application ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the target use and/or application. Attribute Values FLOORING ( ) INSULATION ( ) MULTI-PURPOSE ( ) ROOFING ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Page 58 of 101
59 Brick : Nailing/Stapling/Fixing Tool Replacement Pars/Accessories Includes any products that may be described/observed as replacement parts for Nailing / Stapling / Fixing Tool products. Excludes products such as complete Nailing / Stapling / Fixing Tool products. Page 59 of 101
60 Brick : Riveting Tools Includes any products that may be described/observed as a hand held tool for the fastening of items with permanent metal fasteners, consisting of a smooth metal shaft with a head, which is then hammered flat to hold the item in place. Excludes products such as staple guns. Page 60 of 101
61 Brick : Staple/Nail Gun Non Powered Includes any products that may be described/observed as a hand held machine for driving staples or nails home. Excludes products such as stationery staplers. Page 61 of 101
62 Brick : Drain Augers Non Powered Includes any products that may be described/observed as a flexible metal cable used to clean out drains by fishing the cable into the drain and breaking up the blockages manually. Excludes products such as powered drain augers. Page 62 of 101
63 Brick : Flaring Tools Includes any products that may be described/observed as a hand tool for the controlled burn off of gas. Excludes products such as incinerators. Page 63 of 101
64 Brick : Pipe Freezing Tools Includes any products that may be described/observed as either a system or kit used to retain water in one area of a pipe while repair works are carried out. The Freezing Tools utilise the power of either carbon dioxide or ice to withstand the pressure built up by the water within the pipes. Includes products such as Manual Pipe Freezing Kits, Manual Pipe Freezing Systems and Pipe Freezing Refill Tubes. Excludes products such as Pipe Bending Tools, Pipe Threaders, Pipe Cutters and Drain Augers. Page 64 of 101
65 Brick : Pipe Threaders Non Powered Includes any products that may be described/observed as a cutting tool used to form pitched grooves at the end of a pipe or tube to enable the work piece to join to a fitting with matching threads. Excludes products such as powered pipe threaders and pipe cutters. Page 65 of 101
66 Brick : Pipe/Tube Cutters Non Powered Includes any products that may be described/observed as a bladed tool specifically designed for cutting pipes or tubing. Excludes products such as knives, saws and bolt cutters. Page 66 of 101
67 Brick : Tubing Benders Includes any products that may be described/observed as a tool for bending tubing. Excludes products such as tubing. Page 67 of 101
68 Brick : Files Includes any products that may be described/observed as a steel hand tool with small sharp teeth on some or all of its surfaces used for smoothing wood or metal. Excludes products such as abrasives and planes. If With Handle ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify whether or not the product has a handle to facilitate being moved or lifted. Attribute Values NO ( ) UNIDENTIFIED ( ) YES ( ) Shape ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the form that the file exists when purchased. Attribute Values FLAT ( ) LAYERED ( ) ROUND ( ) TRIANGULAR ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Type of File ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the type of file edge surface. Attribute Values BASTARD ( ) COMBINATION ( ) NIL ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Page 68 of 101
69 Page 69 of 101
70 Brick : Planes Includes any products that may be described/observed as a carpenter's hand tool with an adjustable blade for smoothing or shaping wood. Excludes products such as abrasives, files and rasps. If With Adjustable Handle ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify whether or not the product is complete with an adjustable handle. Attribute Values NO ( ) UNIDENTIFIED ( ) YES ( ) Page 70 of 101
71 Brick : Planes/Shapers/Files/Rasps Variety Packs Includes any products than can be described/observed as two or more distinct Filing, Shaping, Planing or Rasping Tools sold together, which exist within the schema belonging to different bricks but to the same class, that is two or more products contained within the same pack which cross bricks within the Planes, Shapers, Files and Rasps class. Includes products such as Planes and Rasps sold together. Items that are received free with purchases should be removed from the classification decision making process. Excludes products such as Chisels and Files variety packs. Page 71 of 101
72 Brick : Rasps Includes any products that may be described/observed as a coarse form of file with sharp individually raised teeth, used to remove wood rapidly. Excludes products such as files, planes and abrasives. Page 72 of 101
73 Brick : Surface Forming Tool Consumables Includes any products that may be described/observed as a consumable product used in the process of surface forming. Excludes products such as surface forming tools. Page 73 of 101
74 Brick : Surface Forming Tools Includes any products that may be described/observed as a hand held rasp like tool used to shave 1/8 inch or less from drywall edges. Excludes products such as planes, scrapers and rasps. Page 74 of 101
75 Brick : Bolt/Chain Cutters Includes any products that may be described/observed as a tool specifically designed for cutting bolts. Excludes products such as pipe cutters, wire cutters. Page 75 of 101
76 Brick : Combination Cutting Tools (Non Powered) Includes any products that may be described/observed as an edge tool used as a cutting instrument which combines the ability to perform multiple functions. Excludes products such as all single purpose cutting tools. Page 76 of 101
77 Brick : Pliers/Pincers Includes any products that may be described/observed as a gripping hand tool with two hinged arms and (usually) serrated jaws that multiplies the strength of a user's hand. Excludes products such as scissors and clamps. Page 77 of 101
78 Brick : Snips/Shears/Nibblers Sheet Metal (Non Powered) Includes any products that may be described/observed as a tool consisting of hinged blades specifically designed for cutting sheet metal. Excludes products such as garden shears, scissors as well as pipe or tube cutters. Page 78 of 101
79 Brick : Wire Cutters Includes any products that may be described/observed as a tool specifically designed for cutting wires. Excludes products such as pipe cutters, bolt cutters and scissors. Page 79 of 101
80 Brick : Blades Saw Non Powered Includes any products that can be described/observed as a separate blade for a hand saw. The blade will be specific to the material it is intended to cut and the type of saw to which it will be attached. Includes products such as hacksaw blades and coping saw blades. Excludes products such as blades for kitchen knives and hobby knives. Material of Target Surface ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the material of the surface on which the product should be used. Attribute Values COMBINATION ( ) MASONRY ( ) METAL ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) WOOD ( ) Page 80 of 101
81 Brick : Saws Hand Replacement Parts/Accessories Includes any products that can be described/observed as a replacement part, or an accessory for Hand Saws. Includes products such as handle grips for hand saws and mitre boxes. Excludes products such as hand saw blades and hammer handle grips. Type of Replacement Part/Accessory ( ) Attribute Indicates with reference to the product branding, labelling or packaging, the descriptive term that is used by the manufacturer to identify the type of replacement part/accessory. Attribute Values MITRE BOX ( ) SAW HANDLE GRIP ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Page 81 of 101
82 Brick : Saws Non Powered Includes any products that can be described/observed as a manual tool usually used to cut through metal or wooden objects. The blade of the hand saw will contain a series of sharp points and will be made from a metal that is generally harder then the material being cut. Includes products such as woodworking and metalworking hand saws. Excludes products such as hand saw blades and retractable knives. Target Material of Saw Non Powered ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the material upon which the hand saw should be applied. Attribute Values MASONRY ( ) METAL ( ) MULTI-PURPOSE ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) WOOD ( ) Type of Saw Non Powered ( ) Attribute Indicate, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the common name associated with the saws common purpose. Attribute Values BOW SAW ( ) COPING/FRET SAW ( ) HACK SAW ( ) MINI SAW ( ) TENON SAW ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Page 82 of 101
83 Brick : Screwdriver Sets Includes any products that may be described/observed as a hand tool for driving screws, which has a tip that fits into the head of a screw, packaged and sold with other screwdriver products, such as alternative tips. Excludes products such as screwdrivers sold alone. Page 83 of 101
84 Brick : Screwdrivers Non Powered Includes any products that may be described/observed as a hand tool for driving screws, which has a tip that fits into the head of a screw. These products may have fixed or interchangeable tips. Includes products such as ratcheting multiple tip screwdrivers. Excludes products such as powered screwdrivers. If Ratcheting ( ) Attribute Indicate, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify whether the tool is capable of continuous usage without removal to re adjust. Attribute Values NO ( ) UNIDENTIFIED ( ) YES ( ) Type of Screwdriver/Rotary Tool ( ) Attribute Indicate, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the type of screwdriver with reference to its functionality. Attribute Values INSULATED ( ) MULTIPLE TIP ( ) NON-SPARKING ( ) PRECISION ( ) TELESCOPE ( ) TORQUE ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Type of Screwdriver/Rotary Tool Rod/Tip ( ) Attribute Indicate, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify and describe the functionality of the rod containing the screwdriver tip. Attribute Values Page 84 of 101
85 FIXED TIP ( ) FLEXIBLE TIP ( ) INTERCHANGEABLE TIP ( ) REVERSIBLE TIP (DOUBLE TIP) ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Page 85 of 101
86 Brick : Screwdrivers Other Includes any products that can be described/observed as a screwdriver designed for use in home improvement, where the user of the schema is not able to classify the products in existing bricks within the schema. Excludes all currently classified screwdriver bricks, including fixed tip, multiple tip and ratcheting screwdrivers. Page 86 of 101
87 Brick : Screwdrivers Replacement Parts/Accessories Includes any products that can be described/observed as replacement parts and accessories for Screwdrivers. Excludes products such as replacement parts and accessories for knives and wrench tools. Page 87 of 101
88 Brick : Dies (Non Powered) Includes any products that may be described/observed as a device used for cutting external screw threads on screws and bolts. Excludes products such as engraving tools. Page 88 of 101
89 Brick : Tap/Die Sets Includes any products that may be described/observed as tools for cutting internal screw threads sold with tools for cutting external screw threads. Excludes products such as taps or dies sold alone. Page 89 of 101
90 Brick : Taps (Non Powered) Includes any products that may be described/observed as a tool used to create the threaded hole to accommodate a bolt or similar device. Taps are available in 2, 3 or 4 flute designs in tapered, plug, or bottoming tip styles as well as spiral points and / or spiral flutes. Excludes products such as dies and taps used to control the release of water. Page 90 of 101
91 Brick : Tools/Equipment Hand Variety Packs Includes any products that may be described/observed as two or more distinct tools/equipment hand products sold together which exist within the schema but belong to different classes, that is two or more products contained within the same pack which cross classes within the tools/equipment hand family. Includes products such as hammers sold with screwdrivers as well as all non powered tool kits containing items from separate classes. Items that are received free with purchases should be removed from the classification decision making process. Excludes products such as powered and hand tools sold together. Page 91 of 101
92 Brick : Clamps Includes any products that may be described/observed as a versatile tool that serves as a temporary device for holding work securely in place. Used for many applications including carpentry, woodworking, furniture making, welding, construction, and metalworking. Excludes products such as Vises. Type of Clamp ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the design of the clamp. Attribute Values ADJUSTABLE CLAMP ( ) BAR CLAMP ( ) C CLAMP ( ) JORGENSON CLAMP ( ) SPRING CLAMP ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Page 92 of 101
93 Brick : Vises Includes any products that may be described/observed as a clamping device usually consisting of two jaws closed or opened by a screw or lever. Excludes products such as clamps. Target Material of Vise ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the material intended for use within the grips of the vise. Attribute Values METAL ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) WOOD ( ) Page 93 of 101
94 Brick : Vises/Clamps Replacement Parts/Accessories Includes any products that may be described/observed as replacement part or accessory for Clamps or Vises. Excludes products such as complete Clamps and Vises. Page 94 of 101
95 Brick : Hex Keys Includes any products that can be described/observed as a tool used to drive screws and bolts, which have a hexagonal socket in the head. Excludes products such as wrenches and spanners. Page 95 of 101
96 Brick : Socket Sets Includes any products that can be described/observed as a set of metal tools of different sizes, which fix onto one handle and are used to fasten and unfasten nuts on pieces of equipment. Includes products such as 10 and 12 piece socket sets. Excludes products such as hex keys and wrenches. Page 96 of 101
97 Brick : Wrenches Ratchet Extensions/Handles Includes any products that can be described/observed as extensions to the existing wrench handles to allow greater leverage or a better grip with which to hold the tool in position. Excludes replacement parts and accessories for wrenches and complete wrench tools. Page 97 of 101
98 Brick : Wrenches/Spanners Includes any products that may be described/observed as a hand tool that is used to hold or twist a nut or bolt to secure or loosen a fastening. Excludes products such as screwdrivers. Type of Wrench/Spanner ( ) Attribute Indicates, with reference to the product branding, labelling or packaging, the descriptive term that is used by the product manufacturer to identify the shape or common name associated with the use of the wrench/spanner. Attribute Values BASIN WRENCH ( ) BOX END WRENCH ( ) COMBINATION WRENCH ( ) DRUM WRENCH ( ) FLARE WRENCH ( ) HEX WRENCH ( ) NUT DRIVER/WRENCH ( ) OIL FILTER WRENCH ( ) OPEN END WRENCH ( ) PIPE/ADJUSTABLE WRENCH ( ) PLUG WRENCH ( ) SOCKET WRENCH ( ) SPARK PLUG WRENCH ( ) STRAP WRENCH ( ) TORQUE WRENCH ( ) TRAP WRENCH ( ) UNCLASSIFIED ( ) UNIDENTIFIED ( ) Page 98 of 101
99 Brick : Wrenches/Spanners Sets Includes any products that may be described/observed as a hand tool used to twist a nut or bolt, which is packaged and sold as a set of similar products. This would include products from the same brick sold together in a single packaging such as a set of wrenches. Excludes products such as screwdrivers sold alone. Page 99 of 101
100 Brick : Wrenches/Spanners/Keys Replacement Parts/Accessories Includes any products that may be described/observed as an accessory or replacement part for a Wrench or Spanner. Includes products such as socket wrench drivers and socket wrench adapters. Excludes products such as complete Spanners or Wrenches. Page 100 of 101
101 Brick : Wrenches/Spanners/Keys Variety Packs Includes any products than can be described/observed as two or more distinct Wrench / Spanner products sold together, which exist within the schema belonging to different bricks but to the same class, that is two or more products contained within the same pack which cross bricks within the Wrenches / Spanners class. Includes products such as Wrenches and Extensions sold together. Items that are received free with purchases should be removed from the classification decision making process. Excludes products such as Wrench and Screwdriver variety packs. Page 101 of 101
ASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
More informationASSIGNMENT 3. Textbook Assignment: 3-5. Which of the following types of hammers is used for driving and pulling nails?
ASSIGNMENT 3 Textbook Assignment: "Clamps," "Jacks," Hammers, Mallets, and Mauls," "Screwdrivers," "Manual Drills," "Screw and Tap Extractors," "Wrenches," "Chisels," and "Punches," chapters 19 through
More informationTools for Plumbing. Introduction
2 Tools for Plumbing Introduction So far, we have studied the importance of plumbing system, its stages and the role and responsibilities of a plumber. We will now look at the various tools that help a
More informationFireFighterPrep Comprehensive Guide to Canadian Fire Service Exams
FireFighterPrep Comprehensive Guide to Canadian Fire Service Exams Copyright 2009 Dekalam Hire Learning Incorporated TOOLS Hammers Hammers are instruments used for pounding. For the most part they serve
More informationSTEEL RULE. Stock TRY SQUARE
FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation
More informationElectrical Construction Name:
Tools of the Trade The following are common tools that are used in the electrical industry. This hand-out is to help familiarize you with the tools, the terminology, and their use. Retractable Steel tape
More informationQuestion 1. Flat file. Half -round. Round file. Three square ( triangle ) Needle files. Page 1 of 46
Question 1 Name Picture Cross section Uses: Cut pattern:: Flat file Half -round Round file Three square ( triangle ) Needle files Page 1 of 46 Question 2 The graph shown below is the data collected for
More informationFlat file. Round file. Hand file. Half -round. Mill file. Square file
Name Picture Cross section Uses: Cut pattern:: Hand file used for roughing and finishing. It has double cut teeth on two faces, single cut teeth on one edge, and one safe edge Flat file used for roughing
More informationHand Tool Identification Worksheet. Name: Screw driver. Purpose: To turn the screws. Name: chisels. Purpose: To remove/chip away materials
Hand Tool Identification Worksheet Name: Screw driver Purpose: To turn the screws Safety Facts: Don t use for prying or as a chisel Name: chisels Purpose: To remove/chip away materials Safety Facts: Always
More informationTool ID. Team Score Format: A team shall be comprised of 4 members. The top 3 team members scores will count toward the final team score.
Tool ID Purpose: To develop the student s ability to correctly identify the names and uses of a variety of tools commonly used in the agricultural industry. Team Score Format: A team shall be comprised
More informationHAND TOOL NOTES For each tool picture and name, please write what it s used for. You will have a quiz on this.
HAND TOOL NOTES For each tool picture and name, please write what it s used for. You will have a quiz on this. Tool (Name & Nut drivers Speed Square Adjustable Bevel Square CONSTRUCTION TOOLS: Tool (Name
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Carpenter AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationIWB-12 - Industrial Work Bench
IWB-12 - Industrial Work Bench 1200 x 750 x 900mm 1000kg Load Capacity Ex GST Inc GST $270.00 $297.00 ORDER CODE: A415 MODEL: Type: IWB-12 Steel with Laminated Top Table Top Load Capacity (kg): Number
More informationBrick : Air Compressors Portable
Brick 10003555: Air Compressors Portable Includes any products that may be described/observed as a compressor that takes in air at atmospheric pressure and delivers it at a higher pressure. Relatively
More informationAzmeera & Sons.
+91-8071681915 Azmeera & Sons https://www.indiamart.com/azmeerasons/ We have garnered a distinct position in the market as wholesaler, retailer and trader of a range of Industrial Tools & Accessories.
More informationNATIONAL CERTIFICATE (VOCATIONAL) NQF LEVEL 2 SUPPLEMENTARY EXAMINATION
MARKING GUIDELINE NATIONAL CERTIFICATE (VOCATIONAL) NQF LEVEL 2 SUPPLEMENTARY EXAMINATION 2010 ENGINEERING TECHNOLOGY This marking guideline consists of 8 pages. MARKING GUIDELINE -2- NC930(E)(M17)V QUESTION
More informationESL - DESIGN AND TECHNOLOGY / TECHNICS HANDTOOL IDENTIFICATION AND TERMINOLOGY
ESL - DESIGN AND TECHNOLOGY / TECHNICS HANDTOOL IDENTIFICATION AND TERMINOLOGY One of the biggest difficulties in teaching ESL students practical skills is the lack of exposure to related technology and
More informationModule One: Non Powered Hand Tools
Module One: Non Powered Hand Tools What is included in this module Why are we learning this? Safety rules Right tool for the right job Identity of Tools Hands on time Quiz Why are we here? Basic knowledge
More informationComplete line of Holemaking Products and Accessories
Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related
More informationSouth Australian Historical Tool Association. Auction Catalogue
South Australian Historical Tool Association 21st March 2018 "Auction of Vintage Tools" Colonel Light Gardens RSL Auction Catalogue Conditions of Sale: 1. Bidders must be financial members of SAHTA Inc.
More informationFULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
More informationIWB-40 - Industrial Work Bench
IWB-40 - Industrial Work Bench 1800 x 750 x 900mm 1000kg Load Capacity On Sale Ex GST Inc GST $398.00 $343.48 $457.70 $395.00 ORDER CODE: A420 MODEL: Type: IWB-40 Steel with Laminated Top Table Top Load
More informationBrick : Tool Belts/Holsters/Pouches
Brick 10003678: Tool Belts/Holsters/Pouches Includes any products that can be described/observed as accessories that fasten around the waist and have a number of compartments that are used for carrying
More informationTools: Sharpie, Square, Vise, Hack saw, Ruler, Punch, Hammer, File. 2. Cut the stock Place stock in vise and cut with hack saw
Purpose: MAKE CATAPULT ARM Step 1 Tools: Sharpie, Square, Vise, Hack saw, Ruler, Punch, Hammer, File Materials: Flat aluminum ½ inch stock (see picture below) Gloves required 1. Pick up the aluminum ½
More informationAffiliate: Richmond Tool Inventory As Of: 4/16/2018
Affiliate: Richmond Tool Inventory As Of: 4/16/2018 NOTE: The Total Inventory quantity does not reflect current tool type availability; please call the Richmond ToolBank at 804-301-0750 for more information.
More informationMODULE INTRODUCTION TO HAND TOOLS. (00103 LESSON 2 of 2) SLIDE PRESENTATION
MODULE 00103-09 INTRODUCTION TO HAND TOOLS (00103 LESSON 2 of 2) SLIDE PRESENTATION SLIDE 33A 12.0.0 SQUARES Squares are used for marking, checking, and measuring. The common squares are the carpenter
More informationSSB-18WS - Stainless Steel Work Bench
SSB-18WS - Stainless Steel Work Bench 1800 x 700 x 900mm Ex GST Inc GST $430.00 $473.00 ORDER CODE: MODEL: Type: Table Top Load Capacity (kg): Number of Drawers (No.): Table Dimensions (L x W x H) (mm):
More informationSTC-COMBI - Industrial Storage & Tooling Cabinet Package Deal
STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal 900 x 450 x 1800mm 150kg Shelf Load & 75kg per Drawer Load Capacity Ex GST Inc GST $1,060.00 $1,166.00 ORDER CODE: MODEL: Shelf Load Capacity
More informationSheet Metal Tools. by:prem Mahendranathan
Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill
More informationBall-Joint Scrapers Steel Blade Carbide Blade 05K K21.04
Ball-Joint Scrapers Steel Blade Carbide Blade 05K21.01 05K21.04 The Veritas Ball-Joint Scraper is based on a tool originally made by L.S. Starrett Tool Company but out of production for many years. Originally
More informationFITTING INTRODUCTION:
FITTING INTRODUCTION: Machine tools are capable of producing work at a faster rate, but there are occasions when components are processed at the bench. Sometimes it becomes necessary to replace or repair
More informationITB-48 - Industrial Tool Box (48") 2 x Gas Struts
ITB-48 - Industrial Tool Box (48") 2 x Gas Struts (1220 x 615 x 720mm) Ex GST Inc GST $400.00 $440.00 ORDER CODE: MODEL: Material Thickness (mm): Gas Struts (No.): Box Dimensions (L x D x H) (mm): Nett
More informationTrade of Sheet Metalwork. Module 1: Sheetmetal Fundamentals Unit 1: Induction Phase 2
Trade of Sheet Metalwork Module 1: Sheetmetal Fundamentals Unit 1: Induction Phase 2 Table of Contents List of Figures... 5 List of Tables... 7 Document Release History... 8 Module 1 Sheetmetal Fundamentals...
More informationChapter 26 CHISELS HOW TO CHOOSE AND USE THEM TM 9-243
Chapter 26 CHISELS HOW TO CHOOSE AND USE THEM The Types and Uses section provides you with a list of some of the types of chisels. These pages should help you select the right chisel to do the job. The
More informationFACILITY ACCREDITATION CHECKLIST R: 01/16/97 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / LAYOUT TOOLS Y N R
FACILITY ACCREDITATION CHECKLIST R: 01/16/97 APPRENTICESHIP Designated Trade: Level 1 2 3 (circle one) Institution: Evaluator(s) / / Rating Code: Y = Yes * N = No * R = Required * * Please use a CHECKMARK
More informationEllisSaw.com. EllisSaw.com P.O. Box Verona, WI
P.O. Box 9019 Verona, WI 9-019 GENERAL OPERATING & SAFETY INSTRUCTIONS * READ INSTRUCTIONS BEFORE USE * CAUTION: Disconnect power supply cord from power source when doing repair work or changing belt.
More informationCARPENTRY. Carpentry tools: The following are the tools that are made use of in all the wood working operations.
CARPENTRY INTRODUCTION: Carpentry may be defined as the process of making wooden components. It starts from a marketable form of wood and ends with a finished product. It Deals with the building work,
More informationITC (HS), 2012 SCHEDULE 1 IMPORT POLICY CHAPTER 82 TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL
CHAPTER 82 NOTES: TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL 1. Apart from blow lamps, portable forges, grinding wheels with frameworks, manicure of pedicure
More informationHand Tools. 1. Marking Out Tools
Hand Tools 1. Marking Out Tools Steel Rule Used for measuring Measure twice, cut once, golden rule of woodwork Rule should begin from the edge of the metal Millimetres are used, nothing else will do 10mm
More informationCharlotte Community ToolBank Master Inventory
To place a tool order, click here. To apply to be a member agency, click here. For more information on the ToolBank, please call us at 704.469.5800. Tool Type Category Subcategory Retail Value Quantity
More informationWondEr Bars Ripping Bars. Cold Chisels Punches 85
DEMOLITION Stanley has elevated demolition tools from crude implements to precision-engineered tools that are every bit as essential and indispensable as a hammer or screwdriver. And while some tool companies
More informationProduct Brochure For T739. Description. Features. Sydney: (02) Brisbane: (07) Melbourne: (03) Perth: (08)
ITB-S3 - Industrial Tool Box Set (30", 36", 48") Package Deal 1 x Gas Strut on 36", 2 x Gas Struts 48" (762 x 356 x 254mm) + (915 x 432 x 540mm) + (1220 x 615 x 720mm) Ex GST Inc GST $590.00 $649.00 ORDER
More informationBSC Industrial Storage Cabinet
BSC-900 - Industrial Storage Cabinet 900 x 450 x 900mm 150kg Shelf Load Capacity Ex GST Inc GST $320.00 $368.00 ORDER CODE: MODEL: Shelf Load Capacity (kg): Drawer Load Capacity (kg): Dimensions (L x W
More informationIC LEARNING SERIES. Marking Out, Measurement, Fitting & Assembly
IC LEARNING SERIES Marking Out, Measurement, Fitting & Assembly The Hong Kong Polytechnic University Industrial Centre IC LEARNING SERIES Marking Out, Measurement, Fitting & Assembly Suitable for the following
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationIWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity
IWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity On Sale Ex GST Inc GST $599.13 $565.22 $689.00 $650.00 Package Contents - SAVE $148.10 (Inc) 1x 1x 4x 4x 1x 1x 1x
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More information1. List or sketch five entirely different forms in which METAL can be supplied to the school workshop.
Homework 1 - Metals 1&2 1. List or sketch five entirely different forms in which METAL can be supplied to the school workshop. 2. Metals are usually classified as Ferrous and Non-ferrous. Explain what
More informationWTC Industrial Mobile Tooling Cabinet Workstation
WTC-1450 - Industrial Mobile Tooling Cabinet Workstation 1170 x 580 x 1450mm 100kg per Drawer Ex GST Inc GST $1,050.00 $1,155.00 ORDER CODE: MODEL: T773 WTC-1450 Number of Drawers (No.): 5 Drawer Load
More informationEspecially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
More informationProduct # Type Length Width Cutter Width #4 Bench 10-5/8 in (270 mm) 2-1/2 in (64 mm) 2 in (51 mm) Product # Type Length Width Cutter Width
stanley no. 4 sweetheart smoothing bench plane Iron is made from extra-thick 1/8" (3.18 mm) A2 steel for excellent edge retention. One-piece base and frog virtually eliminate chatter. Cherrywood handle
More informationHand Tools and Power Tools
Lesson Outcomes The student will be able to: Identify a variety of hand tools and power tools and describe their purpose, application and how they are operated in a safe and proper manner. A wide variety
More informationCurium 19H Installation Instructions & Parts List
Curium 19H Installation Instructions & Parts List Illustration Curium 19H Right Hand Page 1 of 15 01/07/2016 Revision 2.1 IMPORTANT This shower screen / enclosure must be installed by suitably qualified
More informationTCW-900NP - Industrial Mobile Tooling Cabinet with Backing Panel
TCW-900NP - Industrial Mobile Tooling Cabinet with Backing Panel 565 x 580 x 1400mm 100kg per Drawer Package Deal Ex GST Inc GST $724.55 $797.00 Package Contents - SAVE $61.00 (Inc) 1x 1x 1x 1x T764 -
More informationStriking with the cheek of the hammer instead of the face. Using the claws of the hammer for work that is best done with a wrecking bar.
The most important consideration is the squareness of the hammer head to the nail at the moment of impact. Sometimes in order to get a nail started, it is convenient to grip the handle closer to the head.
More informationD E S I G N A N D M A N U F A C T U R E : C O U R S E M A T E R I A L
UNIT D E S I G N A N D M A N U F A C T U R E : C O U R S E M A T E R I A L metalwork processes Screw Threads The screw thread is a very important detail in engineering. It is used to hold parts together.
More informationProfessional Tools for Craftsmen
TOOLS Professional Tools for Craftsmen Roofers Sheet Metal Workers TOOLS TOOLS Snips Genuine Aviation Snips 01280240 Stainless steel, compound leverage 09.45 x 3.15 0.83 lb. for stainless steel sheets,
More informationAffiliate: Atlanta Tool Inventory As Of: 1/1/2018
Affiliate: Atlanta Tool Inventory As Of: 1/1/2018 NOTE: The Total Inventory quantity does not reflect current tool type availability; please call the Atlanta Community ToolBank at (404) 254-0938 for more
More informationTOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL
CHAPTER 82 TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL Notes 1. Apart from blowlamps, portable forges, grinding wheels with frameworks, manicure and pedicure
More informationShuttering Carpenter
Lab Specifications Shuttering Carpenter An initiative of Ministry of Skill Development & Entrepreneurship, Govt. of India and National Skill Development Corporation 02 If we have to promote the development
More informationArchitecture and Construction Plumbing and Pipefitting Revised 8/30/2012 Item Number Price Per Piece Total
Architecture and Construction Plumbing and Pipefitting Revised 8/30/2012 Item Number Price Per Piece Total 2ft. Level 3 $7.00 $21.00 4ft. Level 2 $14.00 $28.00 Pipe Rack 2 $300.00 $600.00 Adjustable Pipe
More informationAffiliate: Atlanta Tool Inventory As Of: 7/2/2018
Affiliate: Atlanta Tool Inventory As Of: 7/2/2018 NOTE: The Total Inventory quantity does not reflect current tool type availability; please call the Atlanta Community ToolBank at (404) 254-0938 for more
More information6043 DESIGN AND TECHNOLOGY
www.onlineexamhelp.com www.onlineexamhelp.com CAMBRIDGE INTERNATIONAL EXAMINATIONS GCE Ordinary Level MARK SCHEME for the October/November 2013 series 6043 DESIGN AND TECHNOLOGY 6043/01 Paper 1, maximum
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationNEW! Tool Trays for Roller Cabinets and Top Chests
NEW! Tool Trays for Roller Cabinets and Top Chests Tool Sets with Foam Organizers for Wide Drawers D096001-FT1T 1/4 Dr., 3/8 Dr. & 1/2 Dr. Sockets & Attachments 2, 4 & 6 1/4 Dr. Extensions, 1/4 Dr. Hand
More informationTOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE
TOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE 1021 NO ITEM # DESCRIPTION QTY Item No: 199512 Hottest package deal from Toolway 1 199512 200 PC Picture Hanging Set 12 2 199512 2 PC
More informationNATIONAL CERTIFICATE (VOCATIONAL) NOVEMBER
MARKING GUIDELINE NATIONAL CERTIFICATE (VOCATIONAL) NOVEMBER 2009 NQF LEVEL 2 This memorandum consists of 7 pages. MARKING GUIDELINE -2- NC930(E)(N25)V QUESTION 1: GENERAL. 1.1 TRUE OR FALSE 1.1.1 1.1.2
More informationFrameless Fixed Panel Slider
INSTALLATION INSTRUCTIONS Frameless Fixed Panel Slider QCI-5279 SINGLE ROLLER WITH ANTI-JUMP DOUBLE ROLLERS QCI5279 Rev Page Certified 08/09/6 Tools: To install your New Shower Enclosure, you may need
More informationLABORATORY MANUAL W-SHOP TECHNOLOGY LAB ME-105-F
LABORATORY MANUAL W-SHOP TECHNOLOGY LAB ME-105-F ME-105F : WORKSHOP TECHNOLOGY MAHARISHI DAYANAND UNIVERSITY ROHTAK SYLLABUS B.TECH. FIRST YEAR LIST OF EXPERIMENTS S.No. NAME OF EXPERIMENTS PAGE No. FROM
More informationTC Industrial Tooling Cabinet
TC-900 - Industrial Tooling Cabinet 900 x 450 x 900mm 75kg per Drawer Ex GST Inc GST $820.00 $700.00 $902.00 $770.00 Special Ends 25/11/2018 ORDER CODE: MODEL: Number of Drawers (No.): Drawer Load Capacity
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationAUTOMATIC WIRE STRIPPER CABLE CUTTING PLIERS WIRE STRIPPERS & CUTTERS SA822, CCP SPECIFICATIONS SPECIFICATIONS
WIRE STRIPPERS & CUTTERS SA822, CCP AUTOMATIC WIRE STRIPPER Strip No. 8 to 22 AWG wire quickly and easily. Features jaws that grip and strip wire with a single squeeze of the handles before returning to
More informationSession: Introduction to PPE and T&P
Session: Introduction to PPE and T&P Learning Objectives Explain what safety PPE, tools and plants are, their purpose and their uses Evaluation Criteria Interactive Questioning Duration Resources Facilitator
More informationHow to repair a wall or ceiling FREE
How to repair a wall or ceiling FREE How to repair a wall or ceiling This guide shows how to repair walls and ceilings throughout the guide we only refer to walls but the same principles apply to ceiling
More informationWorkshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292
More information317 Hammers. General Tools CLAW HAMMER - STEEL CLAW HAMMER - STEEL CLAW HAMMER - FIBREGLASS CLAW HAMMER - STEEL CLAW HAMMER - FIBREGLASS
Rubber for secure grip One piece construction MTS3475 Professional for wood working Superbly balanced with head and shaft forged in one piece from selected tool steel with a full mirror polish surface
More informationMatch the tool with its name.
Handyperson Special Index Activity Page Match the tool with its name. Hammer Drill Nail Screw Nut Level Ladder Pliers Wrench Screwdriver Measuring Tape Tool Time Word Search BOARD BOLT BRICK CEMENT CONSTRUCTION
More informationjoining materials - wood
UNIT D E S I G N A N D M A N U F A C T U R E : C O U R S E M A T E R I A L Wood joints joining materials - wood The majority of joints used in woodcraft have been designed specifically to attain the maximum
More informationFrameless Inline Door With Return QCI5263
INSTALLATION INSTRUCTIONS Frameless Inline Door With Return QCI5263 WALL MOUNT HINGES FRAMELESS DOOR / PANEL / RETURN PANEL QCI5263 REV. 0 Page 1 Certified 06/17/2016 Parts List with wall mount hinges
More informationFrameless Inline Door QCI5254
INSTALLATION INSTRUCTIONS Frameless Inline Door QCI5254 FRAMELESS DOOR / PANEL QCI5254 REV. 0 Page 1 Cer fied 06/16/2016 Parts List with wall mount hinges *Quanes may vary QCI5254 REV. 0 Page 2 Cer fied
More informationTCW Industrial Tooling Cabinet
TCW-1200 - Industrial Tooling Cabinet 881 x 653 x 1200mm 100kg per Drawer Ex GST Inc GST $1,070.00 $1,230.50 ORDER CODE: MODEL: T772 TCW-1200 Number of Drawers (No.): 7 Drawer Load Capacity (kg): 100 Maximum
More informationLayout Tools. Marking and Layout Tools
Best Welds, Contour Sales Vendor Code: BWS, CON Welders & Pipe Fitters Rap-Around Double ruled so both the top and bottom surfaces can be used for layouts - it is never upside-down! Packaged in its own
More informationDubnium 11 Installation Instructions & Parts List
Dubnium 11 Installation Instructions & Parts List Illustration Dubnium, H1 Handle Right Hand: Open Out Page 1 of 25 IMPORTANT This shower screen / enclosure must be installed by suitably qualified individuals.
More informationSET CM.160A WITH 8-DRAWER ROLLER CABINET JET.8GM3 AND CHEST JET.C4GM3
SET CM.160A WITH 8-DRAWER ROLLER CABINET JET.8GM3 AND CHEST JET.C4GM3 : Weight: 239 kg. Qty JET.8GM3 1 JET+ 8-drawer roller cabinets - 3 modules per drawer JET.C4GM3 1 JET+ 4-drawer chest - 3 modules per
More informationHardwood Installation Products. Catalog No. 4
Hardwood Installation Products Catalog No. 4 Table of Contents Pages 1 2-4 5 6 7 8 9 Product Categories Moisture Meter & Self Leveling Concrete Restoration & Blades Abrasives Fastening Cutters & Accessories
More informationWASSCE / WAEC FURNITURE MAKING SYLLABUS
WASSCE / WAEC FURNITURE MAKING SYLLABUS WWW.LARNEDU.COM Visit www.larnedu.com for WASSCE / WAEC syllabus on different subjects and more great stuff to help you ace the WASSCE in flying colours. SCHEME
More informationCurium 19.4H Installation Instructions & Parts List
Curium 19.4H Installation Instructions & Parts List Illustration Curium 19.4H Right Hand Page 1 of 21 30/06/2016 Revision 1.0 IMPORTANT This shower screen / enclosure must be installed by suitably qualified
More informationSkills. Pupil Homework Name :- Lesmahagow High School Technical Department. Homework Name the tool shown opposite.
Homework 27 1. Name the tool shown opposite. (Page 38) (1) Lesmahagow High School Technical Department 2. Name the tool shown opposite. (Page 39) (1) Practical Woodworking 3. Name the tool shown opposite.
More informationFrameless Inline Door QCI5248
INSTALLATION INSTRUCTIONS Frameless Inline Door QCI5248 FRAMELESS PANEL / DOOR / PANEL QCI5248 REV. 0 Page 1 Certified 06/16/2016 Parts List with glass to glass hinges *Quantities may vary. **Support Bar
More informationProf. Steven S. Saliterman Introductory Medical Device Prototyping
Introductory Medical Device Prototyping Department of Biomedical Engineering, University of Minnesota http://saliterman.umn.edu/ You must complete safety instruction before using tools and equipment in
More informationIntroduction to PPE and T&P
Introduction to PPE and T&P Learning Objective By the end of this session, you will be able to: Explain what safety PPE, tools and plants are, their purpose and their uses 2 Let s Discuss What do you mean
More informationtile redi redi DOOR Redi Redi Swing Slide g TM TM...Opening Doors to Stunning Showers! TM TM SERIES: CONFIGURATION: MOUNTING PACKAGE:
redi DOOR INSTALLATION INSTRUCTIONS tile redi Redi Redi Swing Slide g TM TM...Opening Doors to Stunning Showers! TM TM SERIES: CONFIGURATION: MOUNTING PACKAGE: 1100 Door-Door Framed sliding doors RDQCI5023
More informationDRILL BITS & THREAD REPAIR DRILL BITS
DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes
More informationRadon 07 Installation Instructions & Parts List
Radon 07 Installation Instructions & Parts List Illustration Radon 07, H1 Handle Right Hand: Open Out 14/06/2016 Revision 1.1 Page 1 of 21 IMPORTANT This shower screen / enclosure must be installed by
More informationGardening. Sprayers/Rakes SPRAY - TRIGGER 500ML & 1 LITRE RAKE - LAWN STEEL FAN RAKE - LAWN RUBBER SPRAY - PRESSURE 1.25 LITRE
SPRAY - TRIGGER 500ML & 1 LITRE RAKE - LAWN STEEL FAN Versatile pressure sprayer for home and garden Adjustable nozzle provides a choice of single jet through to fine mist Trigger action for easy onehand
More informationTwo Panel Frameless Bypass Door
INSTALLATION INSTRUCTIONS Two Frameless Bypass Door Series 00 Please Record Model Number From Carton Label Here Please read these instructions carefully to familiarize yourself with the required tools,
More informationDesign and Technology Resistant materials Key words and definitions
Design and Technology Resistant materials Key words and definitions Word Acrylic Definition a type of thermoplastic, which is hard and can be transparent. Used to make shop signs. Perspex is a trade/brand
More informationBuilding Bigger Things. Woodworking Tools and Machinery. Marking Gauge. Thumb Screw. Stop Screw. Shoe. Beam. Pin. Head. Face Plate
Woodworking Tools and Machinery Pin Shoe Face Plate Thumb Screw Head Stop Screw Beam Marking Gauge A marking gauge is used to mark a uniform width on a board. The steel combination square discussed in
More informationKentucky 4H Wood Science Plans Notebook. Plans Level 3
Kentucky 4H Wood Science Plans Notebook Plans Level 3 MATERIALS: 2 pieces wood 3/4 x 10 x 4 1 piece wood 3/4 x 12 x 4 2 pieces wood 3/4 x 3 x 2 5 1/2" 2 pieces wood 3/4 x 3 x 1 8 1 piece wood 2 x 4 x
More information