INSTRUCTION MANUAL. ABA-12 airmotor
|
|
- Benjamin Scott
- 5 years ago
- Views:
Transcription
1 INSTRUCTION MANUAL ABA-12 airmotor
2 For your safety, please read manual thoroughly before operating. After reading this manual, keep it in a place that the user always can contact easily. Wear protective glasses and ear protector and protective clothes. Table of Contents Beveltools (Radius & weld edge beveling) 3 Limited warranty 4 Safety Instructions 5 Maintenance and check 6 Recommended arrangement of air piping 6 Use-settings and adjustments 7 Changing a Bevel Head and Fitting a Bevel Head 8 Exploded view 9 Spare parts List 10 EC Declaration of Conformity 38 To prevent injury and property damage, follow these instructions. Incorrect operation due to ignoring instructions will cause harm or damage. 2
3 RADIUS & WELD EDGE BEVELING Bevel Mate is an advancement over traditional grinding discs, acetylene torch or hand held or table beveling tools for cutting a radius or weld angle on metal plate and pipe. The one piece helical Bevel Mate head and multi-point position system results in a smooth and even finish in any place and any position. Changing a Bevel Mate head takes only seconds and the head is always perfectly balanced for smooth vibration free operation. The illustrations and instructions in this booklet will show how to set up the air motor, how to adjust the guide plate for bevel depth or wall thickness, and how to remove and replace a Bevel Mate head. Follow these instructions and it s possible to get a perfect bevel every time. Beveltools... it s that easy. 3
4 LIMITED WARRANTY Bevel Mate power tools and bevel heads have been manufactured to quality standards and carefully inspected before shipment. Bevel Mate tools and bevel heads and are warranted to be free from any defect in materials and workmanship for a period of 6 months from the original date of purchase. If repair is required, the user must return the complete tool, with shipping prepaid, and with proof of purchase to Bevel Mate s original or nearest authorized dealer. If inspection by an authorized Bevel Mate technician shows an original defect in material or workmanship Bevel Mate will repair or replace (at our option) the tool or bevel head without charge during the warranty period. This warranty does not apply to normal use or wear and tear. This warranty does not confer any damages caused by careless or unsafe use or handling, alteration, accidents, misuse or repairs made or attempted by anyone other than Bevel Mate and its original manufacturers or authorized service-centre s or technicians. This warranty applies in lieu of any other implied or express guarantees or warranties, and any variations of these terms are not authorized and strictly prohibited. The foregoing obligation is Bevel Mate s sole and only liability under this or any other warranty, express or implied, and under no circumstances shall Beveltools be liable for any incidental or consequential damages. The above warranty terms, limitations or exclusions are effected only to the extent that they may be mitigated by state or local laws, and then only to the extent allowed. Bevel Mate reserves the right to make changes or improvements to its products without incurring any liability or obligation whatsoever and without being required to make any corresponding changes or improvements in products previously manufactured or sold. Contact your local Dealer for parts and service. Safety Instructions Always work safely & use protective clothing and eyewear 4
5 SAFETY INSTRUCTIONS Safety first! In order to use air tools properly and safely, the user must read carefully and understand these instructions before operation. Keep this instruction manual at a best place near the working area for reading and referring before operation. Be careful not to remove the warning labels attached to air tools. WEAR PROPER CLOTHING AND PROTECTORS Always wear the proper clothing for safe operation (Fig.1). Do not wear loose clothing that may be affected because the RPM of air tools. Wear a safety cap to protect the head scalp and hairs. Wear safety eyeglasses, which should be consisted of an impact proof lens. Wear a mask for protecting against the dust and particles which are generated during the operation and which are harmful for your health. Wear an ear protector to prevent noise damage and preserve your hearing ability. Wear safety shoes. Take a time for relax when operators are tired. Do not touch the rotating wheel when in operation. WORKING AREA AND ENVIRONMENT F Fig. 1 Keep working area clean and be careful not to slip on oily or slippery surfaces. Keep away from flammable or explosive liquids or gaseous, that can cause fire by the spark generated during operation. Do not operate power tools in the explosive atmosphere which is likely to blow up. According to the operating condition, noise or vibration is generated. Be sure to wear ear and hearing protection that conforms to all the local regulations. PROPER OPERATION Be sure that the air pressure is supplied at the rated pressure for proper performance of the tool. Be sure that cutting heads, screws, bearings and attachments are tightened up before operation. If not, grinders can be broken by the vibration and it is very dangerous. When attaching the accessories at the tools, check the attached state. When handling air tool parts, be careful not to touch the sharp edge. Never use a bevel head which is broken, twisted, defective etc. broken parts of grinder during operation are very dangerous to machines as well as operators. When replacing the beveling head, be sure that the air is turned off and the hose is disconnected. Operate in a proper and comfortable posture, an unstable and improper posture can cause pain to an operators hand, feet and waist. Always use two hands to control the machine. Do not shock, drop down or throw air tools as precision parts can break. Strong shock can cause failure by the broken and twisted parts. Do not use air tools for abnormal operation. Be sure that operation is within the air tools capacity. Do not use air tools for other purposes except instructed. Bring the machine slowly into contact with the work piece only after the maximum tool speed has been reached. When cutting a bevel always move the machine from left to right against the direction of rotation of the milling head. When machining bore holes, always work in a clockwise direction. Take Beveling machine from work piece and turn off. 5
6 MAINTENANCE AND CHECK Keep air tools clean and stored safely after using them. When air tools need repair, air tools should be checked by the manufacturer or the licensed agent. Repairing by the operator can cause failure and serious damage to the air tool and the operator. When replacement parts are needed, only approved parts from the manufacturer should be used. Unauthorized parts can cause failure and serious damage to the operator and the machine. When special tools are needed for disassembly or re-assembly of air tools, inquire to the licensed agent or manufacturer. Vent the pressurized air out for purification from the air tank every day and mount air filter at the tank inlet. Supply proper lubricants for air tools every day to protect against the acid causing damage to inner parts. Do not use improper or broken hoses or connectors. DISPOSAL Air tools consist of steel, iron, bronze, aluminium, rubber or some others. Be careful not to contaminate humans or environment when air tools are disposed. RECOMMENDED ARRANGMENT OF AIR PIPING 6
7 USE SETTINGS AND ADJUSTMENTS Only authentic Bevel Mate replacement heads are acceptable for use with this professional quality tool. On/OFF Lever Attach Air Fitting 90 PSI 49 CFM Spindle Lock Button Rotate base counter clockwise to decrease cutting depth and clockwise to increase. Remove and Replace Bevel Head with spindle lock button and 5mm Hex wrench Air Input Air consumption Power Output Free speed Max. wheel diameter Grinding spindle thread Sound pressure level Noise emission level Vibration Weight 7 6 bar/90 PSI (1/2 Air Hose Rec d) 1390 ltr/min / 49 CFM 1.5 Kw/2.00 HP 10,000 rpm 45 mm M Kg / 12.5 lbs
8 Beveling tool Use only Beveling tools whose admissible maximum speed is equal to or higher than the no load speed of the machine. Use only clean tools! Changing a Bevel Head Disconnect tool from air supply. Turn the Flange head to its maximum depth. (Fig. 2) Lock spindle with the locking button. (Fig. 3) Use the Hex wrench (5mm) to unscrew the guide bearing. (Fig. 3) Take the bevel head off. Guide Bearing Bevel Head 5mm Fig. 1 Wrench Tool Fig. 2 Fig. 3 Fitting a Bevel Head Before fitting the Bevel head clean the surface of the adapter and Bevel Head. Check the guide bearing, it should run smoothly, a guide bearing that doesn t run smoothly will damage the Bevel head and can lead to a broken Bevel Head. Place Bevel Head on the adapter, the pin on the adapter should easily fit into the pinhole in the Bevel Head. Lock spindle with the locking button. (Fig. 3) Use the Hex wrench (5mm) to tighten the guide bearing. (Fig. 3) Check if the Bevel head runs smoothly and true, not true running Bevel heads must be replaced immediately. Check Bevel tool before use. The Bevel head must be correctly mounted and must rotate freely. Perform a trial run a minimum over a period of 30 seconds without load. Do not use Bevel Heads which are damaged, which do not run true or which vibrate! 8
9 EXPLODED VIEW 9
10 PARTS LIST Index Part No Description (ENG) AN1-6 Acorn Nut (4) A16 Etched Bevel Tool Back Cap G Top Seal Packing GG Spindle Plug B-6201Z Ball Bearing G Top Plate G L Handle Assembly SNP-3.238HD Coiled Spring Pin A23C Safety Throttle Lever Complete 10A IG SCR SAE Inlet Bushing w/screen 10B IG-07117BSPT-SCR BSPT Inlet Bushing w/screen GG Throttle Valve Complete 11A GG Stem 11B W2-4 Washer 11C IG Seat 11D IG Cap 11E TWA-4 Tooth Washer 11F N2-UNC3 Nut IG Spring GG Throttle Cap G Vanes (5) G Rotor G Cylinder G Bottom Plate NP-414 Pin (2) G Bottom Seal Packing B-6203Z Ball Bearing KI-4425 Stud Key BES-001 Spindle KI-5510 Stud Key A10 Shaft Spacer A09 Shaft Adapter Dowel Pin (Sold in Packs of 10) A01 Front Bevel Housing A02 Spindle Lock Assembly CS-6110 Screw Cap (4) B-68052RS Ball Bearing SR-R0143 Retaining Ring A18 Beveler Base A34 Spring Plunger (4) FSS-618 Flat Head Socket Cap Screw (4) A15 Dead Handle Complete GG Optional Side Dead Handle 10
11 CE DECLARATION OF CONFORMITY CE KONFORMITÄTSERKLÄRUNG / DÉCLERATION DE CONFORMITÉ CE / CE VERKLARING VAN OVEREENSTEMMING / CE DEKLARATION OM ÖVERENSSTÄMMELSE / CE ERKLӔRING OM OVERENSSTEMMELSE / CE OVERENSSTEMMELSESERKLӔRING / DECLARATIÓN DE CONFORMIDAD CE / CE DECLARAÇÃO DE CONFORMIDADE / DICHIARAZIONE DI CONFORMITA CE We/Wir/Nous/Wii/Vi/Vi/Vi/Nosotros/Nós/Noi: Beveltools BV P.O.box AD Velp Gld The Netherlands Declare under our sole responsibility, that the product / Erklären hiermit in alleiniger Verantwortung, dass das Produkt / Déclaron ici sous notre responsabilité exclusive que ce produit / Verklaren onder onze eigen verantwoording, dat het produkt/förklarar härmed på vårt fulla ansvar att maskinen / Erklærer herved under vårt fulle ansvar, at maskinen / Erklærer under eget ansvar, at produktet / Declaramos bajo neustra sola responsabilidad que el producto / Declaramos sob nossa exclusiva responsabilidade que o produto / Dichiariamo sotto nostra unica resposabilità che il prodotto: Machine type / Maschinentyp / Type de machine / Type machine / Makintyp / Maskin type / Maskintype / Tipo de máquina / Tipo de máquina / Tipo di macchina: Bevel Mate ABA-12 Serial or batch no. / Serien oder Chargen-Nr. / Numéro de serie ou de lot / Serie of batch nr. / Serie- eller satsnummer / Serie- eller satsnr. / Serie eller produktionsnr. / Número de serie o de lote / N de série ou lote / Numero di matricola: To which this declaration relates, is in confirmity with the requirements of directives 2006/42/EG / auf das sich diese Erkärung bezieht, den anforderungen der richtlinien 2006/42/EG entspricht / ce à quoi se réfère cette déclaration, est en conformité avec les exigences des directives 2006/42/EG / waarop deze verklaring betrekking heeft, in overeenstemming is met de eisen van de richtlijnen 2006/42/EG / för vilken denna deklaration gäller, överenstämmer med kraven i direktiven 2006/42/EG / at maskinen, som denne erklæingen gjelder for, oppfyller kravene i direktivene 2006/42/EG / hvortil denne erklæring relater sig, er i overensstemmelse medkravene i direktiverne 2006/42/EG / a que se refire esta declaratión es conforme a los requisitos de las directivas 2006/42/EG / a cui questa dichiarazione si riferisme, è conforme ai requisisti delle direttive 2006/42/EG / johon tämä ilmoitus viittaa, on yhdenmukainen direktiivien 2006/42/EG. Applied harmonized standards / Angewandte harmonisierte Standarts / Normes harmonisées / Toegepaste geharmoniseerde normen / Harmoniserade standarder som tillämpats / Tilpasset standarder som er anvendt / Gældende harmoniserede standarder / Normas armonizadas aplicadas / Normas harmonizadas aplicadas / Standard armonizzati applicati NEN-EN-ISO 12100:2010 NEN-EN-ISO :2012 NEN-EN-ISO :2010 NEN-EN-ISO 15744:2008 Name and position of author /Name und Position des Erstellers / Nom et fonction de lémetteur / Naam en funktie van de uitgever / Utfärdarens namn och befattning / Utsteders navn og stilling / Udsteder, navn og stilling / Nombre y cargo del expeditor / Nome e cargo do emissor / nome e posizione dei dichiarante: J.E. Hofman Managing Director Signature of author / Unterschrift des Erstellers / Signature de l emetteur / Handtekening van de uitgever / Utfärdarens namnteckning / Utsteders signatur /Udsteders underskrift / Firma dei expedidor / Assinatura do emissor / Firma del dichiarante 11
12 P.O. Box AD Velp The Netherlands T: +31(0) F: +31(0) Centerline Ind. Dr. St. Louis, MO United States of America T: F:
10 Ton Pull Back Ram
10 Ton Pull Back Ram Model 97207 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the
More informationHANDHOLE SEAT GRINDER
1041-1601 HANDHOLE SEAT GRINDER OPERATING INSTRUCTIONS & SERVICE MANUAL Rev: A, 9/17/2007 TO REDUCE THE RISK OF INJURY AND EQUIPMENT DAMAGE USER MUST READ AND UNDERSTAND OPERATOR S MANUAL. Thomas C. Wilson,
More information3/8 Butterfly Air Impact Wrench
3/8 Butterfly Air Impact Wrench 37730 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight
More informationMortising Attachment
Mortising Attachment Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationGeneral Safety and Maintenance Manual
General Safety and Maintenance Manual 3 H.P HORIZONTAL GRINDERS CAPACITY -6 Inch (150 mm) or 8 Inch (200 mm) Type 1 Wheels -Any Type 16, 17, 17R, 18 or 18R Cone Wheels w/ 5/8-11 Mounting 3 H.P HORIZONTAL
More informationGeneral Safety and Maintenance Manual 3 H.P HORIZONTAL GRINDERS. and Thread RPM T1-5/8-11 X 1.9. Lever. Lever. Handle
HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual 3 H.P HORIZONTAL GRINDERS 3 H.P HORIZONTAL GRINDERS Capacity: -6 Inch (150 mm) or 8 Inch (200 mm) Type 1 Wheels -Any Type 16,
More informationGeneral Safety and Maintenance Manual
General Safety and Maintenance Manual 4 H.P HORIZONTAL GRINDERS CAPACITY -6 Inch (150 mm) or 8 Inch (200 mm) Type 1 Wheels -Any Type 16, 17, 17R, 18 or 18R Cone Wheels w/ 5/8-11 Mounting 65H Series 4 H.P
More informationInstructions for Stone Cutting Machine
Technical data Kg. Instructions for Stone Cutting Machine SCM600 3HP 2800rpm IP55 SCM800 3HP 2800rpm IP55 SCM1000 2800rpm IP55 SCM1200 2800rpm IP55 L=600 B=85(165) L=800 B=85(175) 500x510 0 or 45 600lt/h
More informationINSTRUCTION BOOK AND PARTS LIST
Rag Cutter MODEL WE WARNING This machine is equipped with a very sharp knife. Keep hands, arms, and hair away from the knife area at all times. Misuse of this machine or failure to follow all safety instructions
More informationH8508 Impact Wrench SERVICE MANUAL. Model (Serial Code FWN) Model (Serial Code FWP)
SERVICE MANUAL H8508 Impact Wrench Model 48755 (Serial Code FWN) Model 48760 (Serial Code FWP) Read and understand all of the instructions and safety information in this manual before operating or servicing
More informationPower Output. Spindle. 7.7 Inches (196 cm) 11.0 Lbs. (5.0 Kg)
HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual SUPER HEAVY DUTY VERTICAL GRINDERS 4 Horsepower Vertical Grinders 4 HORSEPOWER Model Number Throttle Type Power Output Weight
More informationINSTRUCTION BOOKLET AND WARRANTY INFORMATION 6 BENCH GRINDER
INSTRUCTION BOOKLET AND WARRANTY INFORMATION 6 BENCH GRINDER Part No.: SW1250 PLEASE READ CARE AND SAFETY INSTRUCTIONS BEFORE USE SPECIFICATIONS Part No.: SW1250 Input Voltage: 240V Frequency: 50Hz Rated
More informationOPERATION AND MAINTENANCE FOR MODEL MRV050A REVERSIBLE
OPERATION AND MAINTENANCE FOR MODEL MRV050A REVERSIBLE MANUAL AIR MOTOR 04666770 Edition 1 April, 1999 IMPORTANT SAFETY INFORMATION ENCLOSED. READ THIS MANUAL BEFORE OPERATING TOOL. FAILURE TO OBSERVE
More informationATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size
Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size SPECIFICATIONS Model Number : ATBG280/6 Nominal Voltage Power Consumption No load speed Wheel size Weight 230Volt 50Hz 280 Watts 2880
More informationATV CULTIVATOR OWNER S MANUAL
ATV CULTIVATOR OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More information1300-lb Furniture and Crate Movers
1300-lb Furniture and Crate Movers Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationINSTRUCTION MANUAL. 125 mm (5 ) MODEL 9005B 125 mm (5 ) MODEL 9005BZ. DOUBLE I N S U LATlO N SPEC IF I CAT I 0 N S
25 mm (5 ) MODEL 9005B 25 mm (5 ) MODEL 9005BZ INSTRUCTION MANUAL DOUBLE I N S U LATlO N SPEC IF I CAT I 0 N S No load speed (RPM) 0,000lmin. AMPS Overall Net Power Spindle (5 V) length weight supply cord
More informationOperating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table
Operating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-140780 Ph.: 800-274-6848 Revision B1 05/2014 www.jettools.com Copyright
More informationMODELS 49 RA 49 RAZ 49 RAC
General Safety and Maintenance Manual MODEL grinder featuring a rear exhaust. Model Number Exhaust Direction REAR Throttle Type (L) Lever or (K) Safety Lever Speed 12000 to 14000 R.P.M (13500rpm is standard)
More informationWUKO-SEAM HAMMER MODEL 1002B
O P E R A T I N G I N S T R U C T I O N S for WUKO-SEAM HAMMER MODEL 1002B 1 0 0 2 B TABLE OF CONTENTS: Safety Instructions Page 3 General Technical Data Page 4 Pre-Fabrication Page 4 Before operation
More informationGENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING CUT-OFF MACHINE
GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.
More information2.75" x 2.20" x 3.70" 70mm x 56mm x 94mm lb. / kg.
Operator s Manual Mini Palm Nailer MPN Item No. 64350 Mini Palm Nailer Shoots up to 3-1/2" (16d) Bulk Nails Ask for Genuine INTERCHANGE Bulk Nails! Note: Please read and fully understand the instructions
More informationHOLE CUTTER SHARPENER ASSEMBLY & SERVICE MANUAL
HOLE CUTTER SHARPENER ASSEMBLY & SERVICE MANUAL WARNING You must thoroughly read and understand this manual before operating the equipment, paying particular attention to the Warning & Safety instructions.
More informationAngle Grinder MODEL 9553B MODEL 9555B
ENGLISH Angle Grinder MODEL 9553B MODEL 9555B 006649 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR
More informationPneumatic Drill / / Technical Specification
CS UNITEC Pneumatic Drill 2 2502 0010 / 2 2502 0030 2 2506 0010 / 2 2506 0030 Technical Specification Model with Lever Throttle Model with Twist Throttle with Selfresetting 2 2502 0010 2 2502 0030 2 2506
More informationLPK1550 Hydraulic Crimping Tool 15-ton
SERVICE MANUAL LPK1550 Hydraulic Crimping Tool 15-ton Serial Code FYF Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
More informationGENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING DISC GRINDER
GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.
More informationOperating Instructions and Parts Manual Hydraulic Shop Presses Models HP-5A/15A/35A
Operating Instructions and Parts Manual Hydraulic Shop Presses Models HP-5A/15A/35A Model HP-35A shown JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-331406 Ph.: 800-274-6848 Revision D
More informationOperating Manual 6 Industrial Bench Grinder ATBG280/
Operating Manual 6 Industrial Bench Grinder ATBG280/6 804531 40 Year Australian Heritage The reputable name in bench grinders for 40 years Protect yourself and others by observing all safety information,
More informationDisc Caliper Brake Model DBSE
AIR CHAMP PRODUCTS User Manual Disc Caliper Brake Model DBSE i In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to
More informationGT Series Grooving Tool
GT Series Grooving Tool Tube & Pipe Cleaners Tube Testers Tube Plugs Tube Removal Tube Installation Operating and Maintenance Instructions www.elliott-tool.com TABLE OF CONTENTS Introduction... 4 Safety
More informationOperating Instructions and Parts Manual Hydraulic Shop Presses Models HP-5A/15A/35A
Operating Instructions and Parts Manual Hydraulic Shop Presses Models HP-5A/15A/35A Model HP-35A shown JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-331406 Ph.: 800-274-6848 Revision C1
More informationHinge Boring/Insertion Machine Set Up And Operation Instructions
Hinge Boring/Insertion Machine Set Up And Operation Instructions Manufactured In The USA By: Thompson Industries, Inc. 1018 Crosby Avenue, Sycamore, IL. 60178-0127 Ph:815-899-6670 Fax:815-899-1918 Thank
More informationSpecifications. Important Safety Information
Specifications Tire Rim Capacity 4 to 12 Rim Height 16 (2) Bead Breaker Handles 21 Long Includes Aluminum Centering Cone (2) Nylon Spacers Important Safety Information 1. Do not exceed max. tire capacity.
More informationMaintenance Information
16601023 Edition 2 January 2014 Air Impact Wrench 2705P1 Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these
More informationFinger Jointer. Operating and Safety Instructions FJA300
Finger Jointer FJA300 Operating and Safety Instructions www.tritontools.com Thank you for purchasing this Triton tool. These instructions contain information necessary for safe and effective operation
More informationSunset Swings By Health in Motion, LLC
Sunset Swings By Health in Motion, LLC Model 421 Lounge Swing Assembly and Operation Manual Record Serial Number Here www.sunsetswings.com by Health In Motion, LLC. 11/6/2009 421 Owners Assembly and Operation
More informationAssembly Instructions and Parts Manual 5C Collet Closer for GHW Lathes Model CC-GHW
Assembly Instructions and Parts Manual 5C Collet Closer for GHW Lathes Model CC-GHW JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-321519 Ph.: 800-274-6848 Revision G1 03/2014 www.jettools.com
More informationIF YOU DO NOT KNOW WHAT YOU ARE DOING, DO NOT DO IT!
TWIN CAM Alpha & Beta Case Boring Tool The JIMS Twin Cam Case Boring Tool takes all the guess work out of boring Twin Cam engine cases to accept JIMS 4" bore cylinders, 100 big bore kit, and 113" and 116"
More informationElectric Chainsaw Sharpener
FPP CHAINSS Electric Chainsaw Sharpener Instruction Manual For your own safety, please ensure you have read these instructions before use and have fully understood all the safety guidelines. Specifications
More informationOPERATOR S MANUAL DRILLING MACHINE WITH ELECTROMAGNETIC BASE
OPERATOR S MANUAL DRILLING MACHINE WITH ELECTROMAGNETIC BASE UNIT 30 NEWHALLHEY BUSINESS PARK, NEWHALLHEY RD, RAWTENSTALL, ROSSENDALE, LANCASHIRE BB4 6HR Tel. +44 1706 229490, fax. +44 1706 830496 www.jeiuk.com
More informationOperating Instructions and Parts Manual SLT-660F/1650 Scissor Lift Tables
Operating Instructions and Parts Manual SLT-660F/1650 Scissor Lift Tables WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-140777 Ph.: 800-274-6848 Revision C
More informationSAUTER HD Version /2015 GB
Sauter GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@sauter.eu Tel: +49-[0]7433-9933-199 Fax: +49-[0]7433-9933-149 Internet: www.sauter.eu Instruction Manual Digital Shore Hardness Tester SAUTER HD Version
More informationSTRINGING MACHINE OWNER'S MANUAL. Copyright 1998 GAMMA Sports - All Rights Reserved
6002 STRINGING MACHINE OWNER'S MANUAL Issue 3 - June 20, 1998 Copyright 1998 GAMMA Sports - All Rights Reserved 6002 OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... FEATURES PAGE 3... ASSEMBLY
More informationModel DB Disc Caliper Brake AIR CHAMP PRODUCTS. User Manual. (i) MTY (81)
DIST. AUTORIZADO MEX (55) 53 63 3 3 QRO (44) 95 7 60 MTY (8) 83 54 0 8 AIR CHAMP PRODUCTS User Manual Model DB Disc Caliper Brake (i) FORM NO. L-00-G-030 MEX (55) 53 63 3 3 MTY (8) 83 54 0 8 DIST. AUTORIZADO
More informationalfa-clamp Tool Assembly Device
Instruction Manual Translation of the Original Instruction Manual Base body 45 /90 / HSK-ABCDEF / PSC / VDI DIN-ISO/MAS/CAT V Example: Base body with tool holder HSK-A63 Designation Types: alfa-clamp 45
More informationRepair Parts. RIDGID parts are available on-line at Parts List For RIDGID 12" Slide Compound Miter Saw. Model No.
Parts List For RIDGID " Slide Compound Miter Saw Model MS0LZ 0 Figure 0 0 0 0 0 0 0 0 0 With Exactline Laser System Without Exactline Laser System Parts List For RIDGID " Compound Miter Saw Model MS0LZ
More informationFoam Plane. Operating Manual with Parts Identification INST. "Teamwork & Communication" August 31, 1998 Issue 3 GUSMER CORPORATION
"Teamwork & Communication" Operating Manual with Parts Identification 2002--INST August 3, 998 Issue 3 GUSMER CORPORATION A Subsidiary of Gusmer Machinery Group, Inc. One Gusmer Drive Lakewood, New Jersey,
More informationCaliper Brake WINDCAL 90
Caliper Brake WINDCAL 90 (i) FORM NO. L-20233-A-0601 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to change without
More informationPARTS CATALOG FRONT WHEEL DRIVE FOR JOHN DEERE 6100 & WHEEL SPRAYERS
PARTS CATALOG FRONT WHEEL DRIVE FOR JOHN DEERE 6100 & 6500 3 WHEEL SPRAYERS MUD HOG MODEL NUMBERS JD6500-13.5-16.1 I3 Tire (Export) JD65003-12.5L-15 I3 Tire TUTHILL Transport Technologies Brookston Indiana
More informationCAUTION: WEIGHT ON THIS PRODUCT SHOULD NOT EXCEED 136KG / 300LBS.
OWNER S MANUAL Thank you for choosing the Sit N Cycle. We take great pride in producing this quality product and hope it will provide many hours of quality exercise to make you feel better, look better
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS MODEL TSM-6000 FACING/SQUARING MACHINE REV 8/2011 USA Otto Arc Systems, Inc. (Corporate/Sales/Mfg. Division) 3921 Sandstone Drive El Dorado Hills, California 95762 Phone: (916) 939-3400
More informationMODEL T " SPIRAL CUTTERHEAD INSTRUCTIONS
MODEL T10125 6" SPIRAL CUTTERHEAD INSTRUCTIONS The Model T10125 spiral cutterhead is designed to replace the straight knife cutterhead on the Model G0452 6" jointer. The total procedure of changing the
More informationTABLE OF CONTENTS DESCRIPTION. Safety Instructions Assembly Operation... 7
TABLE OF CONTENTS DESCRIPTION PAGE Warranty... 1 Safety Instructions... 2 Assembly... 3 Operation... 7 #360 Grain Cleaner Drawings... 8 #360 Grain Cleaner Parts List... 10 Utility Auger Option Drawing...
More information18 GAUGE ELECTRIC METAL SHEAR
241-9895 18 GAUGE ELECTRIC METAL SHEAR Operator s Manual SAVE THIS MANUAL You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in
More informationAssembly Instructions and Parts Manual 5C Collet Closer for ZX Series Lathes Model CC-ZX
Assembly Instructions and Parts Manual 5C Collet Closer for ZX Series Lathes Model CC-ZX JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-321292 Ph.: 800-274-6848 Revision B 03/2014 www.jettools.com
More information3/4 HP MEAT PROCESSOR. Owner s Manual
3/4 HP MEAT PROCESSOR Owner s Manual Item # 1A-MS501 READ & SAVE THESE INSTRUCTIONS Congratulations on your Guide Gear Purchase. Take your game to the next level with field-tested Guide Gear products for
More informationManual Carton Closing Staplers
Operator s Manual Manual Carton Closing Staplers SHB00-A Item No. 6400 -/8" Crown Carton Closing Stapler 5/8" and /4" (5mm and 8mm) Ask for Genuine INTERCHANGE A58 and A4 Staples SHB50-C Item No. 640 -/4"
More informationAIR METAL SHEAR PISTOL TYPE
AIR METAL SHEAR PISTOL TYPE Model 36567 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ
More informationVARIABLE SPEED WOOD LATHE
MODEL MC1100B VARIABLE SPEED WOOD LATHE INSTRUCTION MANUAL Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. Version: 2015.02.02
More informationVARIABLE SPEED BECH LATHE
VARIABLE SPEED BECH LATHE Instruction Manual Please read this instruction manual thoroughly and follow all directions carefully. 1 Important Safety Instructions READ ALL INSTRUCTIONS AND WATNINGS BEFORE
More information34 o Clipped Head Air Frame Nailer
34 o Clipped Head Air Frame Nailer MODEL: CFN34 Part No. 3110397 OPERATING & MAINTENANCE INSTRUCTIONS 1207 SPECIFICATIONS Min. Hose Size (ID)... 6 mm (1/4 ) Ave. Air Consumption... 14.8 cfm Operating Pressure...
More informationCOYOTE ENTERPRISES, INC. RIMLOC BLAST WHEEL MAINTENANCE & ASSEMBLY MANUAL
COYOTE ENTERPRISES, INC. RIMLOC BLAST WHEEL MAINTENANCE & ASSEMBLY MANUAL Parts & Machinery for the Abrasive Blast Industry 27301 East 121st Street Coweta, Oklahoma 74429 (918) 486-8411 Fax (918) 486-8412
More informationpneumatic c-ring tool
pneumatic c-ring tool HC56 HC56 WARNINGS! Always read tool manual before operating tool. Always wear safety glasses when operating or while in the area where a tool is being used. When test cycling tool
More informationInstallation Instructions Kit, Base Rail Bracket Part # 31413
Installation Instructions Kit, Base Rail Bracket Part # 31413 Dealer / Installer: End User: Provide a copy of these Instructions to the end user of this product. These Instructions provide important operating
More information.JET. HP-5A/15A/35A Hydraulic Press Parts List EQUIPMENT& TOOLS. JET EQUIPMENT & TOOLS, INC. A WMH - Walter Meier Holding Company.
.JET EQUIPMENT& TOOLS HP-5A/15A/35A Hydraulic Press Parts List (HP-15A shown) JET EQUIPMENT & TOOLS, INC. A WMH - Walter Meier Holding Company P.O. BOX 1349 Auburn, WA 98071-1349 253-351-6000 Fax 253-939-8001
More informationTABLE OF CONTENTS DESCRIPTION. Safety Instructions Assembly Operation... 7
TABLE OF CONTENTS DESCRIPTION PAGE Warranty... 1 Safety Instructions... 2 Assembly... 3 Operation... 7 #360 Grain Cleaner Drawings... 8 #360 Grain Cleaner Parts List... 10 Utility Auger Option Drawing...
More informationRecord the serial number and date of purchase in your manual for future reference.
10 Woodworking Bandsaw Model: 10-305 Parts List Record the serial number and date of purchase in your manual for future reference. Serial number: Date of purchase: Part # 10-305PL1 For more information:
More informationWARNING! Read and understand the entire instruction manual before attempting set-up or operation of this machine!
! WARNING! Read and understand the entire instruction manual before attempting set-up or operation of this machine! 1. This machine is designed and intended for use by properly trained and experienced
More informationCircular Saw MODEL MT581. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH Circular Saw MODEL MT58 005337 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
More informationCHAINSAW SHARPENER MODEL: ECSS-1
CHAINSAW SHARPENER MODEL: ECSS-1 Part No: 3402075 ASSEMBLY & INSTRUCTION MANUAL LS0409 INTRODUCTION Thank you for purchasing this CLARKE product Before attempting to use the product, it is essential that
More informationTUCANA-02 P PORTABLE END MILLING MACHINE USER S MANUAL
TUCANA-02 P PORTABLE END MILLING MACHINE USER S MANUAL 1 CONTENTS Page 1. General Information 3 1.1. Introduction 3 1.2. Manufacturer 3 2. Machine s Description and Purpose of Use 3 2.1. Machine s description
More informationUniversal TechBox Series
Instruction Sheet Universal TechBox Series UTB-A2-14 / UTB-HR-A2-14 THANK YOU Thank you for purchasing a Universal TechBox UTB-A2-14 / UTB-HR-A2-14. Please read these instructions thoroughly before installing
More informationSECTION 9: PARTS. Headstock
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 52-4777 or visit www.grizzly.com/parts to check
More informationSupport@Powrkraft.com 8ga. @ 0ft, 6ga. @ 50ft, ga @ 00ft, 0ga @ 00ft 3-6 Model Number Motor Diameter* 65556 500W 0 Volt 0 / Most Wood 0 4 ton 30 PSI 3.7 qt. 37 0 97 lb. 6 0W (-3 ISO Viscosity) Hydraulic
More informationOperating Instructions and Parts Manual 5C Collet Closer for GHB-1340A Lathe Model CC-GHB1340A
Operating Instructions and Parts Manual 5C Collet Closer for GHB-1340A Lathe Model CC-GHB1340A JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-321514A Ph.: 800-274-6848 Revision C 03/2014
More information400 SERIES GRINDER PUMPS 41502, 42202,43302, AND MODELS
Section: MOYNO 500 PUMPS Page: 1 of 6 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 400 SERIES GRINDER PUMPS 41502, 42202,43302, AND 44402 MODELS DESIGN FEATURES Housing: Cast iron Pump Rotor: Chrome
More information# x 12 Wood Turner s Lathe
#86892 8 x 12 Wood Turner s Lathe Please read and understand all instructions before using this tool. Note: These instructions will show you how to assemble this machine, work its controls and maintain
More information8 TONNE LOG SPLITTER
8 TONNE LOG SPLITTER MODEL NO: LOGBUSTER 9 PART NO: 3402043 OPERATION & MAINTENANCE INSTRUCTIONS LS03/16 INTRODUCTION Thank you for purchasing this CLARKE 8 Tonne Log Splitter. Before attempting to use
More informationImpact Wrench MODEL 6905B MODEL 6906
ENGLISH Impact Wrench MODEL 6905B MODEL 6906 005305 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR
More informationELECTRIC TUBE ROLLER
41238-0000 ELECTRIC TUBE ROLLER OPERATING INSTRUCTIONS & SERVICE MANUAL Rev: A, 8/20/2007 TO REDUCE THE RISK OF INJURY AND EQUIPMENT DAMAGE USER MUST READ AND UNDERSTAND OPERATOR S MANUAL. Thomas C. Wilson,
More information20 Ton HYDRAULIC SHOP PRESS
20 Ton HYDRAULIC SHOP PRESS Stock Number W41063 OWNER S MANUAL WARNING! It is the owner and/or operators responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product
More informationHandling instructions
Router Model M 2SC Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that these
More informationET-110 EXTREMA MACHINERY COMPANY, INC. P.O. BOX 1450, ALBANY, LOUISIANA (877) FAX (225)
ET-0 EXTREMA MACHINERY COMPANY, INC. P.O. BOX 450, ALBANY, LOUISIANA 707 (877) 398-7362 FAX (225) 567-2966 PREFACE The XT-0 is precision built and manufactured to satisfy the highest standards. For maximum
More information30 Bending Brake. Model Assembly and Operating Instructions. Distributed exclusively by Harbor Freight Tools.
30 Bending Brake Model 41311 Assembly and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Copyright 1999 by Harbor Freight Tools. All
More informationM-5 PRO CORE BORE PARTS LIST DRILLING MACHINE. (March 2017) Part #
M- PRO CORE BORE DRILLING MACHINE PARTS LIST (March 07) Part #809 Table of Contents Description Page No. Carriage Assembly....... - Combo Base Assembly....... - 7 Anchor Base Assembly........8 Anchor
More informationMODEL M1023 QUICK CHANGE COLLET ATTACHMENT INSTRUCTION MANUAL. Phone: On-Line Technical Support:
MODEL M1023 QUICK CHANGE COLLET ATTACHMENT INSTRUCTION MANUAL Phone: 1-360-734-3482 On-Line Technical Support: tech-support@shopfox.biz #6727BL COPYRIGHT JANUARY, 2005 BY WOODSTOCK INTERNATIONAL, INC.
More informationMANUAL TNS Series Nut Splitter
TNS Series OPERATION AND MAINTENANCE MANUAL TNS Series Nut Splitter MODELS TNS-012, TNS-100, TNS-104, TNS-108, TNS-112, TNS-200, TNS-208, & TNS-300 1025 Conroy Place, Easton, PA. 18040 U.S.A. Phone: +1
More informationGEARED HEAD DRILL / MILL MACHINE INSTRUCTION MANUAL
www.industrialtool.com.au GEARED HEAD DRILL / MILL MACHINE INSTRUCTION MANUAL READ CAREFULLY AND UNDERSTAND THESE INSTRUCTIONS BEFORE USE. LIMITED WARRANTY Industrial Tool & Machinery Sales (hereinafter
More informationKnife grinding machine K3 H/K
Knife grinding machine K3 H/K 01.11.2010 GS-Schleiftechnik, Leyher Str. 61 a, D-90431 Nürnberg Phone 0049/9193/4404, Fax 0049/9193/4391 e-mail: info@gs-de.eu 1 Table of Contents A. SAFETY... 3 A.1 THE
More informationHC715 / HC716 WARNINGS!
pneumatic c-ring tool HC75 / HC76 HC75 / HC76 WARNINGS! Always read tool manual before operating tool. Always wear safety glasses when operating or while in the area where a tool is being used. When test
More informationD R I L L - G R I N D E R S BL 13D-2
D R I L L - G R I N D E R S BL 13D-2 2 Table of contents 1. General safety rules for all machines 3 2. Additional safety rules 4 3. Features 4 4. Specification 4 5. Operation 4 5.1 Assemble the fixture
More informationMaxiMist SprayMate Pro HVLP TANNING SYSTEM
MaxiMist SprayMate Pro HVLP TANNING SYSTEM DO NOT USE EQUIPMENT BEFORE READING THIS MANUAL This manual contains important warnings and instructions. Please read these instructions carefully and keep for
More informationDIAMOND CONCRETE SAW PARTS LIST MODEL CC1113-XL P R O D U C T S. June Part #
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC1113-XL June 013 Part #10 TABLE OF CONTENTS Description Page No. Saw Assembly (Normal Cut).... - Saw Assembly (Up-Cut)...... - Gas Engine Assembly......
More information9 PIECE TUNGSTEN CARBIDE HOLE SAW KIT. Model 90721
9 PIECE TUNGSTEN CARBIDE HOLE SAW KIT Model 90721 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ
More informationPlanishing hammer stand For use with SKU Planishing hammer
Planishing hammer stand For use with SKU 94847 Planishing hammer Model 96300 Assembly And Operation Instructions Please Note: Planishing Hammer not included with Stand. Due to continuing improvements,
More informationLifeGear G1 /HOME GYM ITEM NO.: 63100
LifeGear G1 /HOME GYM ITEM NO.: 63100 OWNER S MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain this owner s manual for future reference. The specifications of this product
More informationMODEL 83 Pail Handler
MORSE MFG. CO., INC. 727 West Manlius Street P.O. Box 518 East Syracuse, NY 13057-0518 Phone: 315-437-8475 Fax: 315-437-1029 Email: service@morsemfgco.com Website: www.morsemfgco.com COPYRIGHT 2005 MORSE
More information3/8 Reversible Air Drill Instruction Manual
Part Code: Code:321265 625627 3/8 Reversible Air Drill Instruction Manual PLEASE KEEP THIS MANUAL SAFE FOR FUTURE REFERENCE 321265 625627 Instruction Manual IMPORTANT Please read through this Manual carefully
More informationCV Control Valves Installation and Operation Manual
CV00 - Control Valves Installation and Operation Manual Overview Warning: This bulletin should be used by experienced personnel as a guide to the installation of the Armstrong CV00 Control Valve. Selection
More information