THE LATEST IN SCIENCE, RESEARCH AND CONSUMER ROBOTICS

Size: px
Start display at page:

Download "THE LATEST IN SCIENCE, RESEARCH AND CONSUMER ROBOTICS"

Transcription

1 THE LATEST IN SCIENCE, RESEARCH AND CONSUMER ROBOTICS DEVELOPED BY: CARNEGIE MELLON ROBOTICS ACADEMY MARCH 2013

2 Relax in the fresh, clean air and natural beauty. Be refreshed by the tall palm trees and serene water. PALM ISLAND has a very distinct personality. PALM ISLAND offers the most comfortable training grounds for robot programmers. Programmers-in-training come here and are prepared for the future in a gentle and luxurious environment. The knowledge and experience gained from training at PALM ISLAND gives programmers the ability to embark on other DSRA prospective missions from dangerous outer space to deep sea locations.

3 Commander Roxie Rivet-minder is in charge of your training. As a rescue bot programmer in training, your main task is to program your robot to complete the boardwalk path. New starting points will unlock as you complete your mission. Complete the tasks by using either The Versatile BUGGYBOT or The Faster MAMMALBOT. Find detailed robot specifications on the next page. But that s not all The Commander is also hosting a Luau-style party for some very influential bots and you need to help!

4

5 There can t be a party without food and drinks. Pick up coconuts when you see them. Drive into them and your robot will do the rest. There are 12 names on the guest list, so collect a minimum of 4 clusters. Try collecting all 5, in case there are any last minute guests. Once you have collected them; drop them off at the Coconut Slab near the main Tiki hut. You will also need to set the lobster traps. The traps were placed on the docks by the last group of trainees. Just push them in the water and catch fresh lobster. Just like the coconuts, you ll need to push at least 4 Lobster traps into the water, but pushing all 5 will make sure there s more than enough. Maps and other resources have been provided, use them whenever necesarry. They can be accessed from the Media section in the Main Menu.

6 Once you get to the Luau Lounge area of the island, you will be in wireless range and will be able to directly control your robot and gripper. Look for an area named Luau Lounge on the MAP. Use the WASD keys on the Keyboard to move the ROBOT. W - Forward S - Reverse A - Turn Left D - Turn Right To open and close the gripper, use the open bracket and close bracket keys on your keyboard. Keeping the island clean is a top priority. Prepare the area for the Luau by placing trash bins around the island. You will be guided where to place them as you go through the training. Place a minimum of 4 Trash bins on the Trash Drop-off Pads. Use the Map to locate the Trash Drop-off Pads around the Luau Lounge area.

7 You will lose signal if your robot moves too far away from the satellite on the main Tiki hut or falls in the water. Press the in-game Help button any time for an explanation of how to interact with the game. Use the MAP from the In-Game Interface to access New Starting Points and Step by step Tutorials. The Starting Points change in to a bright yellow graphic once they have been unlocked within the world After you complete all the missions, invitations will be sent out and guests will start pouring in.

8 A badge is a symbol or indicator of an accomplishment, skill, quality or interest. Programmers in training will recieve the following badges: Make sure to Log In to The Computer Science Student Network to keep track of your badges online. If you do not have a CS2N Account, click the CREATE CS2N ACCOUNT Button. Access all the Badges earned In-Game from the BADGES section of the MAIN MENU. Configure your own levels out of a wide selection of classroom-themed assets: balls, cylinders, boxes, walls, line tracking tiles, and more. Challenge yourself, or share your levels with students, classmates, or teammates. It s a free download for all ROBOTC for RVW users. The NEW update includes a long list of features and improvements, the biggest being the ability to IMPORT your own 3D objects from Solidworks and Inventor. GOOD LUCK to all the trainees that choose to practice programming on beautiful PALM ISLAND! ROBOTICS TODAY MARCH 2013

ROBOTICS TODAY THE LATEST IN SCIENCE, RESEARCH AND CONSUMER ROBOTICS NOVEMBER 2012 DEVELOPED BY: CARNEGIE MELLON ROBOTICS ACADEMY

ROBOTICS TODAY THE LATEST IN SCIENCE, RESEARCH AND CONSUMER ROBOTICS NOVEMBER 2012 DEVELOPED BY: CARNEGIE MELLON ROBOTICS ACADEMY ROBOTICS TODAY THE LATEST IN SCIENCE, RESEARCH AND CONSUMER ROBOTICS NOVEMBER 2012 DEVELOPED BY: CARNEGIE MELLON ROBOTICS ACADEMY Operation Reset! The Deep Space Research Administration (DSRA) has tasked

More information

A User s Guide to the Robot Virtual Worlds App RVW APP. ROBOTC Graphical Programming. Virtual Programming Challenges to Foster Computational Thinking

A User s Guide to the Robot Virtual Worlds App RVW APP. ROBOTC Graphical Programming. Virtual Programming Challenges to Foster Computational Thinking A User s Guide to the Robot Virtual Worlds App RVW APP ROBOTC Graphical Programming Virtual Programming Challenges to Foster Computational Thinking Table of Contents 2 Table of Contents 3 What is the RVW

More information

2809 CAD TRAINING: Part 1 Sketching and Making 3D Parts. Contents

2809 CAD TRAINING: Part 1 Sketching and Making 3D Parts. Contents Contents Getting Started... 2 Lesson 1:... 3 Lesson 2:... 13 Lesson 3:... 19 Lesson 4:... 23 Lesson 5:... 25 Final Project:... 28 Getting Started Get Autodesk Inventor Go to http://students.autodesk.com/

More information

MISSION I STARGAZING SEEKER

MISSION I STARGAZING SEEKER AG E S 2-4 MISSION I STARGAZING SEEKER Congratulations! Your deep-sea exploration research team has just been awarded a new grant from the Global Oceanography Foundation to explore previously uncharted

More information

Introduction to the VEX Robotics Platform and ROBOTC Software

Introduction to the VEX Robotics Platform and ROBOTC Software Introduction to the VEX Robotics Platform and ROBOTC Software Computer Integrated Manufacturing 2013 Project Lead The Way, Inc. VEX Robotics Platform: Testbed for Learning Programming VEX Structure Subsystem

More information

UNDERSTANDING LAYER MASKS IN PHOTOSHOP

UNDERSTANDING LAYER MASKS IN PHOTOSHOP UNDERSTANDING LAYER MASKS IN PHOTOSHOP In this Adobe Photoshop tutorial, we re going to look at one of the most essential features in all of Photoshop - layer masks. We ll cover exactly what layer masks

More information

ROBOTC: Programming for All Ages

ROBOTC: Programming for All Ages z ROBOTC: Programming for All Ages ROBOTC: Programming for All Ages ROBOTC is a C-based, robot-agnostic programming IDEA IN BRIEF language with a Windows environment for writing and debugging programs.

More information

SWITCH & GLITCH: Tutorial

SWITCH & GLITCH: Tutorial SWITCH & GLITCH: Tutorial ADDITIONAL TASKS Robot Play a) Pair up with a classmate! b) Decide which one of you is the robot and which one the programmer. c) The programmer gives specific instructions to

More information

In this project you ll learn how to create a game, in which you have to match up coloured dots with the correct part of the controller.

In this project you ll learn how to create a game, in which you have to match up coloured dots with the correct part of the controller. Catch the Dots Introduction In this project you ll learn how to create a game, in which you have to match up coloured dots with the correct part of the controller. Step 1: Creating a controller Let s start

More information

VEX Robotics Platform and ROBOTC Software. Introduction

VEX Robotics Platform and ROBOTC Software. Introduction VEX Robotics Platform and ROBOTC Software Introduction VEX Robotics Platform: Testbed for Learning Programming VEX Structure Subsystem VEX Structure Subsystem forms the base of every robot Contains square

More information

Programming Design ROBOTC Software

Programming Design ROBOTC Software Programming Design ROBOTC Software Computer Integrated Manufacturing 2013 Project Lead The Way, Inc. Behavior-Based Programming A behavior is anything your robot does Example: Turn on a single motor or

More information

CONTENTS INTRODUCTION 2 CONTROLS 2. INTRODUCTION Titanfall 2 is the sequel to Respawn Entertainment s 2014 breakout hit, Titanfall.

CONTENTS INTRODUCTION 2 CONTROLS 2. INTRODUCTION Titanfall 2 is the sequel to Respawn Entertainment s 2014 breakout hit, Titanfall. CONTENTS INTRODUCTION 2 CONTROLS 2 MAIN MENU 8 MULTIPLAYER 8 INTRODUCTION Titanfall 2 is the sequel to Respawn Entertainment s 2014 breakout hit, Titanfall. In Titanfall 2 s Single Player campaign, you

More information

ParentZone. Your guide to accessing your child s account and their learning journey.

ParentZone. Your guide to accessing your child s account and their learning journey. ParentZone Your guide to accessing your child s account and their learning journey. Accessing ParentZone Shortly after your child has started, you will receive an email to one or both of your registered

More information

Getting Started with Osmo Coding Duo. Updated

Getting Started with Osmo Coding Duo. Updated Updated 12.20.17 1.0.3 What s Included Each set contains two character blocks. Play with Mo and Awbie in combination with your existing coding blocks. Please note that you need the game pieces from Coding

More information

Set Up Your Domain Here

Set Up Your Domain Here Roofing Business BLUEPRINT WordPress Plugin Installation & Video Walkthrough Version 1.0 Set Up Your Domain Here VIDEO 1 Introduction & Hosting Signup / Setup https://s3.amazonaws.com/rbbtraining/vid1/index.html

More information

2 Robot Pick and Place

2 Robot Pick and Place 2 Robot Pick and Place NAME: Date: Section: INTRODUCTION Robotic arms are excellent for performing pick and place operations such as placing small electronic components on circuit boards, as well as large

More information

VECTOR PAINTINGS - User Guide VECTOR PAINTINGS. For Adobe Photoshop Elements 2019, 2018, 15, 14, 13, 12, 11. User Guide

VECTOR PAINTINGS - User Guide VECTOR PAINTINGS. For Adobe Photoshop Elements 2019, 2018, 15, 14, 13, 12, 11. User Guide VECTOR PAINTINGS For Adobe Photoshop Elements 2019, 2018, 15, 14, 13, 12, 11 User Guide CONTENTS 1. THE BASICS...1 1.1. About the effects...1 1.2. How the actions are organized...1 1.3. Downloading and

More information

1:400 Scale Single Runway #1 (AD-SR01-0B-400)

1:400 Scale Single Runway #1 (AD-SR01-0B-400) Thank you for purchasing the 1:400 scale Airport Diorama Single Runway #1. I know you will be pleased with the final product. Before you get started, here is a list of what you ll need: Paper, about 80

More information

Math 1310: Intermediate Algebra Computer Enhanced and Self-Paced

Math 1310: Intermediate Algebra Computer Enhanced and Self-Paced How to Register for ALEKS 1. Go to www.aleks.com. Select New user Sign up now 2. Enter the course code J4QVC-EJULX in the K-12/Higher education orange box. Then select continue. 3. Confirm your enrollment

More information

iphoto Getting Started Get to know iphoto and learn how to import and organize your photos, and create a photo slideshow and book.

iphoto Getting Started Get to know iphoto and learn how to import and organize your photos, and create a photo slideshow and book. iphoto Getting Started Get to know iphoto and learn how to import and organize your photos, and create a photo slideshow and book. 1 Contents Chapter 1 3 Welcome to iphoto 3 What You ll Learn 4 Before

More information

The light sensor, rotation sensor, and motors may all be monitored using the view function on the RCX.

The light sensor, rotation sensor, and motors may all be monitored using the view function on the RCX. Review the following material on sensors. Discuss how you might use each of these sensors. When you have completed reading through this material, build a robot of your choosing that has 2 motors (connected

More information

Census Taker User Guide

Census Taker User Guide Census Taker User Guide Now that you have downloaded and installed Census Taker 1.1.1 to your computer from http://www.forthecousins.com/censustaker, here is a look at how to use it. Before you start,

More information

VECTOR PAINTINGS - User Guide VECTOR PAINTINGS. For Adobe Photoshop CC, CS6, CS5, CS4, CS3. User Guide

VECTOR PAINTINGS - User Guide VECTOR PAINTINGS. For Adobe Photoshop CC, CS6, CS5, CS4, CS3. User Guide VECTOR PAINTINGS For Adobe Photoshop CC, CS6, CS5, CS4, CS3 User Guide TABLE OF CONTENTS 1. THE BASICS...1 1.1. About the effects...1 1.2. How the actions are organized...1 1.3. Downloading and installing

More information

Revision for Grade 6 in Unit #1 Design & Technology Subject Your Name:... Grade 6/

Revision for Grade 6 in Unit #1 Design & Technology Subject Your Name:... Grade 6/ Your Name:.... Grade 6/ SECTION 1 Matching :Match the terms with its explanations. Write the matching letter in the correct box. The first one has been done for you. (1 mark each) Term Explanation 1. Gameplay

More information

Welcome to the Break Time Help File.

Welcome to the Break Time Help File. HELP FILE Welcome to the Break Time Help File. This help file contains instructions for the following games: Memory Loops Genius Move Neko Puzzle 5 Spots II Shape Solitaire Click on the game title on the

More information

MISSION I STARGAZING SEEKER

MISSION I STARGAZING SEEKER G E S 9- MISSION I STRGZING SEEKER Congratulations! Your deep-sea exploration research team has just been awarded a new grant from the Global Oceanography Foundation to explore previously uncharted depths

More information

Game Design Document. Plataforms: Platformer / Puzzle

Game Design Document. Plataforms: Platformer / Puzzle Plataforms: Genre: Platformer / Puzzle Target Audience: Young / Adult 1 CONTENTS 2 VISUAL APPEAL... 3 2.1 Character Appeal... 3 2.2 Lighting and effects animation... 3 3 INOVATION... 4 3.1 Technical...

More information

Hostess Portal Reference Guide

Hostess Portal Reference Guide Hostess Portal Reference Guide You want your workshop to be a success and we want to help! The Hostess Portal, available on your Stampin Up! demonstrator s Web Site is a fantastic tool to help you organize

More information

Getting Started with Osmo Coding Jam. Updated

Getting Started with Osmo Coding Jam. Updated Updated 8.1.17 1.1.0 What s Included Each set contains 23 magnetic coding blocks. Snap them together in coding sequences to create an endless variety of musical compositions! Walk Quantity: 3 Repeat Quantity:

More information

Overview. The Game Idea

Overview. The Game Idea Page 1 of 19 Overview Even though GameMaker:Studio is easy to use, getting the hang of it can be a bit difficult at first, especially if you have had no prior experience of programming. This tutorial is

More information

Module 1 Introducing Kodu Basics

Module 1 Introducing Kodu Basics Game Making Workshop Manual Munsang College 8 th May2012 1 Module 1 Introducing Kodu Basics Introducing Kodu Game Lab Kodu Game Lab is a visual programming language that allows anyone, even those without

More information

Getting Started with Coding Awbie. Updated

Getting Started with Coding Awbie. Updated Updated 3.16.18 2.0.0 What s Included Each set contains 19 magnetic coding blocks to control Awbie, a playful character who loves delicious strawberries. With each coding command, you guide Awbie on a

More information

Introduction Welcome to PhotoSweeper Lite

Introduction Welcome to PhotoSweeper Lite Introduction Welcome to helps you get rid of duplicate photos. It works with photos from Apple Photos, iphoto, Aperture, Adobe Lightroom and Capture One* libraries as well as photos from your hard drives.

More information

TWITTER SECRETS FOR AUTHORS

TWITTER SECRETS FOR AUTHORS TWITTER SECRETS FOR AUTHORS AUTHORSCOPE authorscope.org info@authorscope.org Why authors use Twitter Twitter has been called the world s largest book club because of its popularity with readers and authors.

More information

VECTOR ART - User Guide VECTOR ART. For Adobe Photoshop CC, CS6, CS5, CS4. User Guide

VECTOR ART - User Guide VECTOR ART. For Adobe Photoshop CC, CS6, CS5, CS4. User Guide VECTOR ART For Adobe Photoshop CC, CS6, CS5, CS4 User Guide TABLE OF CONTENTS 1. THE BASICS... 1 1.1. About the effects... 1 1.2. How the actions are organized... 1 2. INSTALLATION & TROUBLESHOOTING...

More information

App Inventor meets NXT

App Inventor meets NXT App Inventor meets NXT Pre-day Questionnaires About Technocamps We go around schools like yours and show you lots of interesting stuff! We also do things we call bootcamps during holidays! What is a STEM

More information

Begin at the beginning," the King said, very gravely, "and go on till you come to the end

Begin at the beginning, the King said, very gravely, and go on till you come to the end An Introduction to Alice Begin at the beginning," the King said, very gravely, "and go on till you come to the end By Teddy Ward Under the direction of Professor Susan Rodger Duke University, May 2013

More information

Chair. Bottom Rail. on the Command Manager. on the Weldments toolbar.

Chair. Bottom Rail. on the Command Manager. on the Weldments toolbar. Chapter 2 Chair Bottom Rail A. Weldments Toolbar. Step 1. Click File Menu > New, click Part and OK. Step 2. Right click Sketch on the Command Manager toolbar and select Weldments, Fig. 1. Step 3. Click

More information

Lineage2 Revolution s Gameplay Tips for Beginners

Lineage2 Revolution s Gameplay Tips for Beginners Lineage2 Revolution s Gameplay Tips for Beginners Tip 1. Complete your Daily Quests, Weekly Quests, and Quest Scrolls! One of the key ways to level up your character is to complete quests. While working

More information

Solidworks Tutorial Pencil

Solidworks Tutorial Pencil The following instructions will be used to help you create a Pencil using Solidworks. These instructions are ordered to make the process as simple as possible. Deviating from the order, or not following

More information

Making Your World with the Aurora Toolset

Making Your World with the Aurora Toolset Making Your World with the Aurora Toolset The goal of this tutorial is to build a very simple module to ensure that you've picked up the necessary skills for the other tutorials. After completing this

More information

Post Workshop Engagement on The 5 Choices to Extraordinary Productivity workshop

Post Workshop  Engagement on The 5 Choices to Extraordinary Productivity workshop Post Workshop Email Engagement on The 5 Choices to Extraordinary Productivity workshop Week 1: Congratulations on completing The 5 Choices to Extraordinary Productivity workshop. By taking the 5 Choices

More information

ORDERING YOUR dōterra

ORDERING YOUR dōterra ORDERING YOUR dōterra A s t e p b y s te p i n s t r u c t i o n g u i d e Created by Rebecca Tereu 2017 STEP 1 Cut and paste the following website address into your URL : https://doterra.myvoffice.com/

More information

SOLIDWORKS TO LASER CUTTER DOCUMENT CONVERSION

SOLIDWORKS TO LASER CUTTER DOCUMENT CONVERSION UNIVERSITY OF CALIFORNIA, SANTA CRUZ BOARD OF STUDIES IN COMPUTER ENGINEERING CMPE118(218)/L: INTRODUCTION TO MECHATRONICS SOLIDWORKS TO LASER CUTTER DOCUMENT CONVERSION PURPOSE: This document outlines

More information

Creating Transparent Floors. Creating Transparent Floors. Contents. Introduction. Requirements. By Cyclonesue, 1 July 2006

Creating Transparent Floors. Creating Transparent Floors. Contents. Introduction. Requirements. By Cyclonesue, 1 July 2006 Creating Transparent Floors Contents SECTION 1: INSTALLING AND PREPARING YOUR TOOLS SECTION 2: CREATING A FLOOR TILE GRAPHIC SECTION 3: CLONE A FLOOR TILE PACKAGE IN HOMECRAFTER SECTION 4: COMPLETE YOUR

More information

Programming Design. ROBOTC Software

Programming Design. ROBOTC Software Programming Design ROBOTC Software Behavior-Based Programming A behavior is anything your robot does Turning on a single motor or servo Three main types of behaviors 1. Complex behaviors Robot performs

More information

CONTENTS CO-OP ADVENTURE CONTROLS EMBARK ON A UNIQUE CO-OP ADVENTURE KEYBOARD / MOUSE 03 STARTING A NEW GAME 04 FRIENDS PASS 04 SAVING 01 CONTROLS

CONTENTS CO-OP ADVENTURE CONTROLS EMBARK ON A UNIQUE CO-OP ADVENTURE KEYBOARD / MOUSE 03 STARTING A NEW GAME 04 FRIENDS PASS 04 SAVING 01 CONTROLS CONTENTS 01 EMBARK ON A UNIQUE CO-OP ADVENTURE 01 CONTROLS 03 STARTING A NEW GAME 04 FRIENDS PASS 04 SAVING EMBARK ON A UNIQUE CO-OP ADVENTURE Play as Leo and Vincent, two men thrown together at the start

More information

Solidworks tutorial. 3d sketch project. A u t h o r : M. G h a s e m i. C o n t a c t u s : i n f s o l i d w o r k s a d v i s o r.

Solidworks tutorial. 3d sketch project. A u t h o r : M. G h a s e m i. C o n t a c t u s : i n f s o l i d w o r k s a d v i s o r. Solidworks tutorial 3d sketch project A u t h o r : M. G h a s e m i C o n t a c t u s : i n f o @ s o l i d w o r k s a d v i s o r. c o m we will create this frame during the tutorial : In this tutorial

More information

Capstone Python Project Features

Capstone Python Project Features Capstone Python Project Features CSSE 120, Introduction to Software Development General instructions: The following assumes a 3-person team. If you are a 2-person team, see your instructor for how to deal

More information

Lab book. Exploring Robotics (CORC3303)

Lab book. Exploring Robotics (CORC3303) Lab book Exploring Robotics (CORC3303) Dept of Computer and Information Science Brooklyn College of the City University of New York updated: Fall 2011 / Professor Elizabeth Sklar UNIT A Lab, part 1 : Robot

More information

A Stony Brook Student s Guide to Using CCDSoft By Stephanie Zajac Last Updated: 3 February 2012

A Stony Brook Student s Guide to Using CCDSoft By Stephanie Zajac Last Updated: 3 February 2012 A Stony Brook Student s Guide to Using CCDSoft By Stephanie Zajac Last Updated: 3 February 2012 This document is meant to serve as a quick start guide to using CCDSoft to take data using the Mt. Stony

More information

Introduction Welcome to PhotoSweeper

Introduction Welcome to PhotoSweeper Introduction Welcome to Do you really need all 12 shots of that coffee table? helps you organize your photo collections by finding and grouping duplicate or similar photos using powerful comparison settings.

More information

AutoDesk Inventor: Creating Working Drawings

AutoDesk Inventor: Creating Working Drawings AutoDesk Inventor: Creating Working Drawings Inventor allows you to quickly and easily make quality working drawings from your 3D models. This tutorial will walk you through the steps in creating a working

More information

SolidWorks Tutorial 1. Axis

SolidWorks Tutorial 1. Axis SolidWorks Tutorial 1 Axis Axis This first exercise provides an introduction to SolidWorks software. First, we will design and draw a simple part: an axis with different diameters. You will learn how to

More information

TABLE OF CONTENTS WHAT IS CITY CHAMPS? AT THE THEATRE GAME MODES SCORING SYSTEM DIVISIONS & SCHEDULE NEW THIS SEASON ELIGIBILITY & PRIZING TERMS INDEX

TABLE OF CONTENTS WHAT IS CITY CHAMPS? AT THE THEATRE GAME MODES SCORING SYSTEM DIVISIONS & SCHEDULE NEW THIS SEASON ELIGIBILITY & PRIZING TERMS INDEX PLAYER HANDBOOK TABLE OF CONTENTS WHAT IS CITY CHAMPS? AT THE THEATRE GAME MODES SCORING SYSTEM DIVISIONS & SCHEDULE NEW THIS SEASON ELIGIBILITY & PRIZING TERMS INDEX WHAT IS CITY CHAMPS? City Champs is

More information

Welcome To Noodle Live

Welcome To Noodle Live Features Guide Welcome To Noodle Live We re here to revolutionalise the way you collect, store and share information at events - it s time to wave goodbye to endless flyers and tatty event programmes.

More information

Table of Contents. Sample Pages - get the whole book at

Table of Contents. Sample Pages - get the whole book at Table of Contents Chapter 1: Introduction... 1 Chapter 2: minivex Basics... 4 Chapter 3: What is a Robot?... 20 Chapter 4: Flowcharting... 25 Chapter 5: How Far?... 28 Chapter 6: How Fast?... 32 Chapter

More information

Free roulette doc Free roulette doc

Free roulette doc Free roulette doc Free roulette doc Free roulette doc Inside bets payouts are from 5 to 1 and up to 35 to 1. FreeCasinoGamesDoc.com is presenting two modern and lively free roulette games. Experience the joy of winning

More information

Note: Objective: Prelab: ME 5286 Robotics Labs Lab 1: Hello Cobot World Duration: 2 Weeks (1/28/2019 2/08/2019)

Note: Objective: Prelab: ME 5286 Robotics Labs Lab 1: Hello Cobot World Duration: 2 Weeks (1/28/2019 2/08/2019) ME 5286 Robotics Labs Lab 1: Hello Cobot World Duration: 2 Weeks (1/28/2019 2/08/2019) Note: At least two people must be present in the lab when operating the UR5 robot. Upload a selfie of you, your partner,

More information

Creating Photo Borders With Photoshop Brushes

Creating Photo Borders With Photoshop Brushes Creating Photo Borders With Photoshop Brushes Written by Steve Patterson. In this Photoshop photo effects tutorial, we ll learn how to create interesting photo border effects using Photoshop s brushes.

More information

I will walk you through step by step on how to set it up so that you can connect to the Team Speak server.

I will walk you through step by step on how to set it up so that you can connect to the Team Speak server. Team Speak 2 Client Setup Tutorial: I made this tutorial for clan members with the hope that it will help you in the setting up of Team Speak Client. I wrote this with the understanding that you have already

More information

Adobe Illustrator. Mountain Sunset

Adobe Illustrator. Mountain Sunset Adobe Illustrator Mountain Sunset Adobe Illustrator Mountain Sunset Introduction Today we re going to be doing a very simple yet very appealing mountain sunset tutorial. You can see the finished product

More information

understanding sensors

understanding sensors The LEGO MINDSTORMS EV3 set includes three types of sensors: Touch, Color, and Infrared. You can use these sensors to make your robot respond to its environment. For example, you can program your robot

More information

An easy user guide AN EASY USER GUIDE

An easy user guide AN EASY USER GUIDE AN EASY USER GUIDE 1 Hello! Welcome to our easy user guide to Create my Support Plan. We have created this guide to help you start using Create my Support Plan. And we hope that you will find it useful.

More information

Operating Instructions For the Aristotle Hand Held Tablet Chess Computer

Operating Instructions For the Aristotle Hand Held Tablet Chess Computer Operating Instructions For the Aristotle Hand Held Tablet Chess Computer Featuring: Superb graphics, Two Chess Engines, Luxury Case, Rechargeable, Play Online Matches. Chess Strategy and Analysis. Uses

More information

Dimension Properties. Student Web Site

Dimension Properties. Student Web Site Dimension Properties All sketch dimensions added to a sketch contain specific individual dimension properties. Most dimension properties are predefined by default or are specified in the Modeling Dimension

More information

Gameplay Controls...4 and 5. Select a Save Slot and Play Style...6. Playing The Game on Foot...7. Playing The Game in a Vehicle...

Gameplay Controls...4 and 5. Select a Save Slot and Play Style...6. Playing The Game on Foot...7. Playing The Game in a Vehicle... TABLE OF CONTENTS Introduction, Portal of Power and Toy Placement...3 Gameplay Controls...4 and 5 Select a Save Slot and Play Style...6 Playing The Game on Foot...7 Playing The Game in a Vehicle...8 and

More information

Sony Soloist will allow you to do all of these same operations digitally, that is to say, on a computer & without a cassette!

Sony Soloist will allow you to do all of these same operations digitally, that is to say, on a computer & without a cassette! Cy-Fair College Language Labs Making & Saving Videos with Sony Soloist What is Sony Soloist? Sony Soloist is a computer program running on all student stations in the language labs. You will notice that

More information

This system is designed to assist you in driving the best prospects to you and your practice the best prospects being REFERRALS.

This system is designed to assist you in driving the best prospects to you and your practice the best prospects being REFERRALS. Introduction This system is designed to assist you in driving the best prospects to you and your practice the best prospects being REFERRALS. Even though referrals are the best prospects, you should never

More information

DREAM BIG ROBOT CHALLENGE. DESIGN CHALLENGE Program a humanoid robot to successfully navigate an obstacle course.

DREAM BIG ROBOT CHALLENGE. DESIGN CHALLENGE Program a humanoid robot to successfully navigate an obstacle course. DREAM BIG Grades 6 8, 9 12 45 90 minutes ROBOT CHALLENGE DESIGN CHALLENGE Program a humanoid robot to successfully navigate an obstacle course. SUPPLIES AND EQUIPMENT Per whole group: Obstacles for obstacle

More information

SAVING, LOADING AND REUSING LAYER STYLES

SAVING, LOADING AND REUSING LAYER STYLES SAVING, LOADING AND REUSING LAYER STYLES In this Photoshop tutorial, we re going to learn how to save, load and reuse layer styles! Layer styles are a great way to create fun and interesting photo effects

More information

IGNITE BASICS V1.1 19th March 2013

IGNITE BASICS V1.1 19th March 2013 IGNITE BASICS V1.1 19th March 2013 Ignite Basics Ignite Basics Guide Ignite Basics Guide... 1 Using Ignite for the First Time... 2 Download and Install Ignite... 2 Connect Your M- Audio Keyboard... 2 Open

More information

Instructions for Hosting a Tournament on the MLFA Site

Instructions for Hosting a Tournament on the MLFA Site Instructions for Hosting a Tournament on the MLFA Site You've decided to host a MLFA forensics tournament, now what? The MLFA provides a web site which you can use to manage your tournament, from the registration

More information

Ev3 Robotics Programming 101

Ev3 Robotics Programming 101 Ev3 Robotics Programming 101 1. EV3 main components and use 2. Programming environment overview 3. Connecting your Robot wirelessly via bluetooth 4. Starting and understanding the EV3 programming environment

More information

PebblePad LEARNER HANDBOOK

PebblePad LEARNER HANDBOOK PebblePad LEARNER HANDBOOK CONTENTS Overview of the online learning environment... 3 Overview of how to find and submit work... 4 Logging Onto the IOS Online... 5 Seeing your Courses... 6 Using Your PebblePad

More information

VARIANT: LIMITS GAME MANUAL

VARIANT: LIMITS GAME MANUAL VARIANT: LIMITS GAME MANUAL FOR WINDOWS AND MAC If you need assistance or have questions about downloading or playing the game, please visit: triseum.echelp.org. Contents INTRODUCTION... 1 MINIMUM SYSTEM

More information

INSTRUCTIONS. For the Commodore 64

INSTRUCTIONS. For the Commodore 64 INSTRUCTIONS For the Commodore 64 GETTING STARTED Turn on your disk drive and then your computer. After the disk drive busy light goes off, insert your disk and close the drive door. Type LOAD"CASTLE",8

More information

Welcome To. A Guide For New Backers 2018

Welcome To. A Guide For New Backers 2018 Welcome To A Guide For New Backers 2018 1 Greetings Gamers! Want to learn more about Caverns Deep? This introduction highlights the features of our terrain and helps you choose the best pledge for your

More information

Mod Kit Instructions

Mod Kit Instructions Mod Kit Instructions So you ve decided to build your own Hot Lava Level Mod. Congratulations! You ve taken the first step in building a hotter, more magmatic world. So what now? Hot Lava Tip: First off,

More information

Aircraft Tracker User Manual V

Aircraft Tracker User Manual V Aircraft Tracker User Manual V 1.1.0.0 1. The Aircraft Tracker application is a Windows Metro 8.1 application that displays aircraft locations, read from an Internet feed, on a map. A displayed aircraft

More information

Blue-Bot TEACHER GUIDE

Blue-Bot TEACHER GUIDE Blue-Bot TEACHER GUIDE Using Blue-Bot in the classroom Blue-Bot TEACHER GUIDE Programming made easy! Previous Experiences Prior to using Blue-Bot with its companion app, children could work with Remote

More information

How To Set Up Your New Wordpress Blog!

How To Set Up Your New Wordpress Blog! The Step-By-Step Guide: How To Set Up Your New Wordpress Blog! Brought To You By Blogelina.com We give you the blogging help you need! Brought to you by Blogelina.com 1 Table of Contents Step #1 - Have

More information

A Day in the Life CTE Enrichment Grades 3-5 mblock Robotics - Simple Programs

A Day in the Life CTE Enrichment Grades 3-5 mblock Robotics - Simple Programs Activity 1 - Play Music A Day in the Life CTE Enrichment Grades 3-5 mblock Robotics - Simple Programs Computer Science Unit One of the simplest things that we can do, to make something cool with our robot,

More information

Resources to help clients optimize their move online

Resources to help clients optimize their move online The Accountant s Guide to Moving Clients Online PART 3: Resources to help clients optimize their move online Accelerate your clients successful transition to QuickBooks Online with these helpful resources.

More information

Introduction to programming with Fable

Introduction to programming with Fable How to get started. You need a dongle and a joint module (the actual robot) as shown on the right. Put the dongle in the computer, open the Fable programme and switch on the joint module on the page. The

More information

what if? You could earn scholarship money for college every time you got a good grade in high school?

what if? You could earn scholarship money for college every time you got a good grade in high school? what if? 3 of23 You could earn scholarship money for college every time you got a good grade in high school? You could also earn money for playing sports, participating in school clubs, being a leader,

More information

An Escape Room set in the world of Assassin s Creed Origins. Content

An Escape Room set in the world of Assassin s Creed Origins. Content An Escape Room set in the world of Assassin s Creed Origins Content Version Number 2496 How to install your Escape the Lost Pyramid Experience Goto Page 3 How to install the Sphinx Operator and Loader

More information

Release Notes - Fixes in Tekla Structures 2016i PR1

Release Notes - Fixes in Tekla Structures 2016i PR1 Release Notes - Fixes in Tekla Structures 2016i PR1, you can now set the to either or. is modified., the ID of the connection plate is not changed anymore when the connection now uses normal rebar groups

More information

Version 8 Tutorial

Version 8 Tutorial Version 8 Tutorial 800-989-4243 214-340-9436 support@vertigraph.com www.vertigraph.com 1 Table of Contents A. Overview... 4 B. About the SiteWorx/OS Window... 4 C. File Types Raster, Vector and PDF...

More information

PARTY. planning. guide

PARTY. planning. guide PARTY planning guide 1 How to host a House Party Whether you ve just applied, are already hosting, or are just curious about what it takes to be a House Party host, our simple step-by-step guide will ensure

More information

Step 1: Create chapters and write your story.

Step 1: Create chapters and write your story. Step 1: Create chapters and write your story. NOTE: Before starting your book, please know that there is free software that can enhance your book writing and it is compatible with CatchMyStory. You may

More information

How To Handbook For Learners

How To Handbook For Learners How To Handbook For Learners 2017 Contents 3 How do I log in? 4-5 How do I watch a video? 6-9 How do I take an assessment? 10-11 How do I review an assessment I have just written? 12-13 How do I review

More information

BERNINA Sewing Machine Workbook 3

BERNINA Sewing Machine Workbook 3 my BERNINA Sewing Machine Workbook 3 Creative Options For BERNINA 880, 7 Series, 580, 570 QE, 560 (Pages 8-12: B 790, 880 only; Pages 13-15: B 880 only) 2016 BERNINA of America. Permission granted to copy

More information

Note: Objective: Prelab: ME 5286 Robotics Labs Lab 1: Hello World Duration: 1 Week

Note: Objective: Prelab: ME 5286 Robotics Labs Lab 1: Hello World Duration: 1 Week ME 5286 Robotics Labs Lab 1: Hello World Duration: 1 Week Note: Two people must be present in the lab when operating the UR5 robot. Upload a selfie of you, your partner, and the robot to the Moodle submission

More information

Control task Robotic buggy

Control task Robotic buggy Control task Robotic buggy Applications: You should be familiar with the use of at least one of the following software applications: Controlling screen images Controlling external devices Skills: You should

More information

10 Steps To a Faster PC

10 Steps To a Faster PC 10 Steps To a Faster PC A Beginners Guide to Speeding Up a Slow Computer Laura Bungarz This book is for sale at http://leanpub.com/10stepstoafasterpc This version was published on 2016-05-18 ISBN 978-0-9938533-0-2

More information

How-to Guide A step-by-step guide to Give as you Live, explaining how to sign up, shop and all the other great services we offer. www.giveasyoulive.com Contents How to sign up How to sign up 3 How to shop

More information

Lesson 10: Loft Features

Lesson 10: Loft Features 10 Goals of This Lesson Your students will be able to create the following part: profiles chisel This lesson plan corresponds to the Loft Features chapter of SolidWorks Getting Started. SolidWorks Student

More information

Ask Jo: Quilt Designing on the Computer

Ask Jo: Quilt Designing on the Computer Ask Jo: Quilt Designing on the Computer If you are new to the blog, welcome. You have reached an archived free pattern. We typically put up new blog post twice daily so there is always something new and

More information

MEASUREMENT CAMERA USER GUIDE

MEASUREMENT CAMERA USER GUIDE How to use your Aven camera s imaging and measurement tools Part 1 of this guide identifies software icons for on-screen functions, camera settings and measurement tools. Part 2 provides step-by-step operating

More information