12 pages of. project inspiration

Transcription

1 12 pages of project inspiration

2 YOU LOVE STICKS BY Kim Arnold Declaration Block Party Alphabet Stickers PROJECT INSTRUCTIONS: STEP 1: Use Block Party patterned paper for the base of the layout. STEP 2: Trim star circle border sticker down a little and add to layout approximately 4 ½" from left side. STEP 3: Add 2 photos (2 ½" x 3 ½") to each side of border sticker, offsetting them by 1 inch. STEP 4: Add brackets from elements stickers beside photos. STEP 5.: Add title above stickers on right and add the year below photos on left. STEP 6: Create a cluster using stickers from the elements sheet at the bottom right of photos. Use foam tape to add dimension to some layers. STEP 7: Randomly add clusters of stars near the year and above the cluster in the right corner.

3 Celebrate Summer by Danielle Flanders Pinwheel Firecracker Block Party Bomb Pop Wood Chip Alphabets Red & white cardstock star punch circle punch scallop circle punch COOL TIP CREATE A STAR OUT OF OUR SCALLOP BANNER ELEMENT STICKERS! PROJECT INSTRUCTIONS: STEP 1: On a 12" x 12" white cardstock background, adhere (2) ½" strips of the Bomb Pop Striped paper vertically on the layout. Place them so the stripes do not match up. Punch (2) stars out of the Block Party paper to add to the ends. STEP 2: Adhere Wood Chip letters to spell celebrate for the title. Punch a star from red cardstock, then use a 2" circle punch to punch around it. Use this red circle in title in place of one of the letters. Punch a star from the Pinwheel paper to add over the b in the title. STEP 3: Cut a strip of Firecracker paper 2" wide. Place vertically beside navy and white stripes. STEP 4: Attach two photos. Cut star sticker, place next to photo on right. STEP 5: Punch red stars and add to layout. STEP 6: Create a star from flag stickers. To do this, punch a 2" circle from patterned paper and place the flags around the circle to create a star shape. STEP 7: Cut three pinwheels from Pinwheel paper. Place on layout. Punch center out of one of the pinwheels to write date inside. STEP 8. Add journaling with black pen.

4 FLOWER JARS by crystal livesay Bandana Firecracker Windsock Indigo Bleu: Clear Stamps pint size jars twine ribbon tag shaped punch circle punch PROJECT INSTRUCTIONS: STEP 1: Cut paper into a 12 x 2 ¾ strip. Adhere the strip of paper around one of your pint sized jars. STEP 2: Pick out a big element such as a flower, journal mat, doily, etc and adhere it to what you want to be the center front of your jar. STEP 3. Use a solid paper and cut out a tag using a tag punch. Stamp the tag with one of your favorite stamps. I used a stamp from the Indigo Bleu stamp set. Instead of stamping you could place a fun element, like the tickets from Declaration elements, on top of your tag. STEP 4: Place the tag onto your centered big element at the front of you jar. Off center it a wee bit so that it hangs over a touch and adds some dimension. STEP 5: Build a small cluster around your tag with flowers, elements or more tags made from your favorite papers. I used a circle punch and put a fun circle star sticker from the Declaration in the middle to complete my cluster. STEP 6: To finish, wrap a matching ribbon around the top of your paper strip or tie some twine around the neck of your jar.

5 Klick BY Mahlin Wiggur Firecracker, Pinwheel Block Party, Windsock Element & Alpha Stickers gesso, mist & embellishments PROJECT INSTRUCTIONS: 1. Cut out 9 scalloped circles from the Pinwheel paper, also cut out the "insides" of 5 of them as well. 2. Prepare the background, which is Block Party paper, by randomly adding gesso and mist (red and aqua). 3. Glue the circles, three in a row, making it a square on the left side of your background. 4. Cut a 2" x 4" piece from the Windsock paper and add it next to the circles. 5. Cut a 2 ¼" x 4 ½" piece from the Firecracker paper, adding it across the Windsock paper. 6. Cut out 3 circles with stars from the Block Party paper, adding one of them inside the center circle and the other 2 making a visual triangle. Use pop dots for more dimension. 7. From element stickers, cut out the big scalloped circle, cut out the inside and add on top of your photo. 8. Decorate with more stickers, flowers, ribbons and add a title.

6 mini album by Janna Werner Bandana Block Party Firecracker Bomb Pop Pinwheel Windsock Cushies Alphabet - Meringue tulle, glitter glue, twine, binding rings, corner chomper, crop-adile, sequins, rhinestones, tag, sewing machine, (decorative) scissors, staples, distress tool PROJECT INSTRUCTIONS: 1. Cut each paper of the Declaration collection into different sizes and shapes to create the pages of the album. To achieve a more random look in the end, make sure to cut a few papers larger than others. The pages in this album go from 4.7 x 2.5" to 4.7 x 6.5". 2. Create tabs in different sizes and shapes on the upper part of some of the pages by cutting them out. 3. Use a corner chomper to round the edges of the paper. You can also vary round and cornered edges like seen on this album. 4. Distress the edges of the paper by using a scissor, knife, sandpaper or distress tool. 5. Sew along the left edge on 3-4 papers. Don t cut the thread, let it hang loose to create a vintage look. 6. Sort the papers and punch two holes for the binding rings. If you have too many pages to use your crop-a-dile right away, use a paper piercer first. The holes on this album are 1,8" from top down and from bottom up. 7. Add tulle for a bit of shabby chic. Tulle is very easy to handle as it doesn t need to be punched to be put onto the binding rings. 8. Embellish the album. To create dimension with the Declaration, stick them onto paper and cut them out. Use dimensional adhesive to create the 3D effect. This way you can prevent that they stick to the background. 9. Apply thread, glitter, staples, rhinestones or whatever you like to loosen the cover. Use white embellishments and Expressions Cushies Alphabet to lighten up the project.

7 Patriotic Gift Bag by Roree Rumph Block Party Firecracker Bomb Pop Pinwheel London Market: Spool Buttons Mistables: Scallop Ribbon buttons & thread COOL TIP STACK OUR ELEMENT STICKERS TO CREATE A DIMENSIONAL FLOWER CENTER PROJECT INSTRUCTIONS 1. Cut the Block Party patterned paper to 7 ¼" x 12". 2. Trim along the top edge of the panel with pinking shears to decorate the edge. 3. Score the panel vertically at 2 ¼", 3 1/2", 4", 8",8 1/2", and 9 ¾". 4. Score the panel horizontally at 1 ¼" from the bottom edge. 5. From the bottom of the panel, cut along the vertical score marks up to the horizontal score mark (but not past it) at 2 ¼", 4", 8", and 9 ¾". 6. Fold at the score marks and adhere the ends together. Fold in the tabs at the bottom of the bag and adhere them closed. 7. Cut the Bomb Pop patterned paper to 8" x 1 ¾". Trim the end, and adhere the panel over the front of bag on the left side. 8. Cut a 4" square panel from the Firecracker patterned paper. Mark the center. From each corner, cut in towards the center (but not all the way to) with pinking shears. Fold every other corner in towards the center and adhere to create a pin wheel. 9. Cut an 8 length of scallop ribbon. Hand sew along the bottom edge of the ribbon, leaving a length of thread on each end. Tie the ends of the thread together and knot, creating a flower. Adhere the flower to the center of the pinwheel. 10. Hand cut a scallop circle from the Pinwheel patterned paper. Layer it with a Spool Button, red button, and a star Element Sticker. Adhere the finished flower to the pinwheel, and adhere the finished pinwheel to the top of the bag over the Bomb Pop patterned paper panel. 11. Adhere two ticket to the bag under the right side of the pinwheel to finish.

8 pennant card by andrea budjack Bomb Pop Windsock London Market: Chipboard Buttons Mistables: Journal Tags, Chipboard Alphas & Scallop Ribbon buttons & thread PROJECT INSTRUCTIONS 1. Cut cardstock 4 ½" x 5 ½". Cut four 1" strips of Declaration paper. Cover cardstock by laying each strip next to another until cardstock is covered. Trim along edges. 2. Cut piece into pennant shape using scissors. Stitch along edges if desired. 3. Adhere pennant piece to folded cardstock base. Trim card around pennant shape as needed. 4. Add Mistables Scallop Ribbon trim and Declaration Element Stickers to top of card. Adhere or stitch into place as desired. 5. Adhere Mistables Journal Tag and large scallop circle Declaration Element Sticker to cards front. 6. Back Declaration Element Sticker with foam tape, punch hole in each side and mount onto card front. 7. Ink London Market Chipboard Buttons and add to front of card using twine and additional buttons. 8. Adhere Mistables Chipboard Alphabet letters using foam tape. Add glitter over top of letters for more sparkle!

9 photo invitation by Felicitas Klink PROJECT INSTRUCTIONS: 1. Cut out a 5" x 10" white cardstock strip and fold it in half to create the card base. 2. Cut strips of the pattern papers. Make sure to cut different but matching colors, patterns and sizes. 3. Distress the edges of the stripes or punch some borders to get an eye-catching mix. 4. Layer all strips on your card. It s important to vary the heights (with foam pads) and lengths of the papers so that they don t end or begin at the same points. 5. Grab two tickets (red and light blue) from the Element Sticker sheet and cut both in half and place it between the papers. 6. When you are finished placing the layers, start gluing it on the card. 7. Place the photo on top of the papers. This will give your invitation a personal touch. 8. Embellish it with a border sticker below and three stars aside then spell invitation with the Bitty Blocks to caption the card. 9. Sew details to highlight at some points and give the finished card a stitching frame at last. Block Party Firecracker Bomb Pop Bandana Spring Jubilee: Bitty Blocks white cardstock border punch sewing machine foam pads photo (2 ¼" x 3 ¼")

10 Pair this with a picnic basket and a vintage red suitcase that you can fill with cocktail napkins (don't forget drinking glasses!) Now you have the makings of a simple and lovely drink table! Sparkling Party Decor by Ranjini Malhotra Pinwheel Bomb Pop Bandana chunky glitter seam binding: red, blue, & auqa drink bottles stick Step 1: Cut a strip of patterned paper to go around the center of the bottle. Use scor-tape to adhere it around the mid section of the bottle. For ease, pick a bottle that has a solid cylindrical shape. Step 2: Apply border stickers around bottom edges of papers. Step 3: Cut out pinwheel flowers from the Pinwheel paper and use an exacto knife or scissors to cut away white space in between the "petals". Then apply glue and shaved ice specks for that "sparkly" look. Step 4: Adhere the pinwheel with a pop dot to the bottle. Tie seam binding around the neck and use two ticket stickers from the sticker sheet (stick them back to back sandwiching the seam binding between). Step 5: Punch out stars from the Pinwheel paper and affix them to the top of the bottle cap. I also added a little pick with a pinwheel flower, and stickers saying "Drink Me" so that guests will know they can utilize the drink bottles too!

11 star card by steph devlin COOL TIP PAINT OUR WOOD CHIP ALPHABETS TO MATCH ANY PROJECT YOU ARE WORKING ON THIS SUMMER! Block Party Windsock Firecracker Bomb Pop Bandana Wood Chip Alphas Pearl Accents Red Acrylic Paint Black Pen Bracket Die Cut Star Die Cut

12 decorated tag by piradee talvanna Block Party Firecracker Pinwheel 1 3/4" Circle Punch Hole Punch White Mist Instructions: 1. Cut 2.75"x4.50" piece from the Block Party pattern paper and adhere to the tag 2. Cut a small banner piece from the Firecracker pattern paper and adhere that to the piece above 3. Using a 1-3/4 circle punch, punch out the center design of the pinwheels (2 required) 4. Adhere a portion of one of the punched pieces to the tag along with the red star sticker from the element sticker sheet 5. Then sprinkle some white and red mist onto the tag 6. Next cut out one an entire pinwheel from the pinwheel pattern paper and adhere the previously punched pinwheel center using foam dots, onto the piece 7. Add a red star sticker from the element sticker sheet using foam dots 8. And to complete the tag, adhere the altered pinwheel to the tag covering a portion of the pattern paper and using a red/white twine add a bow on the top.

13 ADORABLE BY STACEY YOUNG Firecracker, Block Party, Windsock Element & Alpha Stickers twine, paper straws, mist, paint, gel pens PROJECT INSTRUCTIONS: 1. Scrape mint paint onto your background using cardboard; working left to right working your way down towards the bottom. 2. Apply mist over painted section and flick excess all over page to create splatters. 3. Create a photo mat; cut 2 rectangle pieces of paper (one slightly smaller than the other) and cut the triangle shape out of each end to create long pennant shapes. distress the edges and overlap with dimensional foam dots. 4. Tear a piece of calico fabric and layer over paper to be placed under photo. scrunch it into place. 5. Cut the Chevron paper to make paper arrows and position to the left and right of your photo. 6. Add twine around photo and add the bracket element sticker under photo. 7. Create a banner under photo using the element stickers then add a second layer over the top with paper. curl up the edges for more dimension. 8. Add additional element stickers around layout using foam pop dots (circles, stars etc.) 9. Cut a paper straw into 3 pieces and adhere to layout as shown. 10. Using black and white gel pens doodle stars around page and use white gel pen to fill in stars and doodles. 11. Using a paintbrush add texture with paste and fill in large star shapes. 12. Tear 2 pieces of patterned paper to run across top of page. 13. Lastly, add your title using the alphabet stickers to the white space on the right side. add pop dots for dimension.

14 1. Start with cutting various banners sizes from the selected pattern papers, in different lengths and thickness. 2. Then adhere the banners onto the white cardstock, overlapping some areas of the various banners to create a fun layer look. Recommend to only adhere adhesive on the top portion of the banners so that you can curl up the tips (for more dimension details). 3. Next add a few drops of white mist randomly onto the banners 4. Then using a star punch, punch out two large stars from the Bomb Pop pattern papers and using foam dots, adhere those onto the banners. 5. Then also adhere the white sticker label and red ticket from the element sticker sheet onto the top left portion of banner cluster, using foam dots 6. Next using a circle punch, punch out one pinwheel center and layer onto the white label sticker and red tag 7. From the element sticker sheet, add a few of the red star stickers here and there 8. From the element sticker sheet, adhere one of the border sticker strip to the top of the layout 9. Finally add your photo and title using the alphabet stickers celebrate by piradee talvanna Block Party, Firecracker, Bomb Pop,, Alphabet stickers Star Punch White Mist

15 IN STORES NOW GET INSPIRED AT PINKPAISLEE.COM