CONTENTS. C. 2 Color Pouches D. 1 Practice Color Pouch E. 2 Surprise Faces, 2 Surprise Bellies and 2 Surprise Headpieces inside Polybags
|
|
- Hilary Moody
- 6 years ago
- Views:
Transcription
1 Kit Maker SURprise PATENT PENDING GEL CONFORMS TO ASTM D4236 ADULT SUPERVISION REQUIRED Go to Smooshins.com for a fun instructional video. A. 1 Surprise Maker B. 2 Surprise Character Molds inside 2 Mystery Shells CONTENTS C. 2 Color Pouches D. 1 Practice Color Pouch E. 2 Surprise Faces, 2 Surprise Bellies and 2 Surprise Headpieces inside Polybags F. 2 Character Stands G. 1 Squeeze Tool A. B. x2 C. x2 D. E. x2 F. x2 G. Illustrations are for reference only. Styles may vary from actual contents. YOUR SURPRISE MAKER Inside View Top View Lift to open. Pegs Lower to close. 1
2 GETTING STARTED NOTE: Before beginning, cover the play area to prevent possible damage. 1 Gather: 2 Insert and align shell: Insert the top of the shell first (as shown) and then insert the bottom for a perfect fit. 3 Close and align openings: 2
3 ATTENTION To make sure your creation comes out the cutest it can be, carefully read the instructions on popping and mixing the pouch before moving forward. Tip: Create your first character with a practice pouch. Gather: TIMER (Not Included) Once you pop the color, begin to quickly mix the color with the clear portion. NOTE: Once it is popped, you will have 1 minute and 30 seconds to mix. Pop: Try all the different methods to pop the inner color. 4 Use your fist. Use your fingers. Use your palms. 5 Tip: Squeeze all of the color out from the inner pouch and quickly mix well with clear portion. Mix: Pedal! Start your timer! 1:30 Try all the different methods to mix the color. QUICKLY pedal, swivel, swirl and twist the pouch to get the color mixed. Rotate and swivel it! Knead it! The color is completely mixed when there is no clear part remaining. Keep mixing! Keep trying! Hooray! 3
4 GETTING READY TO SQUEEZE You must work quickly, so keep handy: You will have 30 seconds to squeeze the color into the surprise maker. 6 Remove and discard bow cap: 7 Insert and lock pouch into surprise maker: Insert all the way in. Turn pouch clockwise to lock in. 8 Squeeze: Insert the pouch through the slit on the squeeze tool. Roll down to squeeze color into surprise maker. Use your fingers to get as much in as possible. Insert! Roll! Squeeze! 9 Grow: Leave the pouch in the surprise maker and wait four hours. Don t disrupt the magic. Don t open the surprise maker. 4
5 10 Almost there... After 4 hours, turn the pouch counterclockwise and remove with some force to snap off the hardened color. DISCARD THE POUCH IMMEDIATELY. Open the surprise maker and remove the mystery shell. Use the tabs to open the shell. Remove the mold and polybags. Leave the character in the mold overnight and start on another mystery shell. YOUR MOLD Hinges Keys 11 Unlock your mold: After leaving your character in the mold overnight, remove the bow cap on the squeeze tool. Then, turn the three keys and pull down the four hinges. Bottom View: KEYS Unlocked Locked 5
6 12 Open your mold: Slowly open the mold and ask an adult to cut the hardened cord. 13 Remove your character: Use your fingers to work around the character and gently pull it out. Then, open the polybags. 14 Make your unique character: Insert the pegs behind the accessories into the openings of your character. Bellies are interchangeable between characters that have the same belly shape. 6
7 1 USING THE SURPRISE MAKER AGAIN AND AGAIN Clean the mold: If there is residue from the last use, wipe the mold with a dry paper towel. 2 Lock the mold: Close the hinges and turn the keys to lock the mold. Bottom View: KEYS Unlocked Locked 3 Insert and align mold: Insert the bottom of the mold first (as shown) and then insert the top for a perfect fit. Then, close the surprise maker and follow steps
8 1 CLEANING THE MOLD 2 Use a dry paper towel to wipe out excess material from the mold. If mixture remains, use a damp cloth and dry thoroughly before starting a new character. CAUTION IMPORTANT INFORMATION Make sure the vent holes are cleaned out and clear. DO NOT puncture the color pouch or intentionally expose the contents in the pouch unless it is going into the mold. Keep away from pets and sharp objects to avoid puncturing the pouch. DO NOT eat the contents of the pouch. DO NOT eat near the play area. Wash hands thoroughly with soap and water after playing or if product gets on your hands. Keep the color pouch away from clothing and furniture to prevent staining. Color transfer may occur. Keep pouch away from heat. Some pouches might be harder to pop than others. Avoid using excessive force to pop the inner color. DO NOT pop the color on a fragile surface such as a glass table. DO NOT step on or do anything that might damage the pouch. Character came out gooey Color hardened inside pouch Color didn t fill the mold TROUBLESHOOTING Make sure the color and clear portions in the pouch are completely mixed (see page 3). Leave character inside the mold overnight. Make sure to mix well within 1 minute and 30 seconds. Then, quickly squeeze the color into the surprise maker. Make sure to squeeze the color into the surprise maker within 30 seconds. Squeeze as much color into the surprise maker as possible. Leave character inside the mold overnight. Mixing is crucial and will take practice to properly mix. A fully mixed pouch should have no remaining clear portion and be mixed under 1 minute and 30 seconds. The valve inside of the color pouch will only open if it is inserted properly into the surprise maker. Avoid touching the mixture, and keep it away from your eyes and face. Do not open mold at anytime while character is growing inside the surprise maker. Wait overnight before removing your character from the mold. Be gentle when removing a character from the mold to prevent tearing. Use a paper towel to dry off the character if mixture is still wet. Do not wash the mold with water. If a paper towel doesn t remove the color, leave it overnight and peel off excess color or use a damp cloth. Use your squeeze tool to remove any mixture stuck to the top opening of the mold. Keep pouch at room temperature. Please keep this manual as it contains important information E/INT MGA Entertainment, Inc. SMOOSHINS is a trademark of MGA in the U.S. and other countries. All logos, names, characters, likenesses, images, slogans, and packaging appearance are the property of MGA Roscoe Blvd. Van Nuys, CA U.S.A. (800) Printed in China MGA Entertainment UK Ltd. 50 Presley Way Crownhill Milton Keynes, MK8 0ES Bucks, UK Visit.com to register your product and to enter our sweepstakes (No purchase necessary) 8
Bath Accessory Installation
Bath Accessory Installation Step 1 - Clean surface using a clean dry cloth or use rubbing alcohol to remove any residue (wax, grease, solvents). Allow to dry one hour. Caution! DO NOT use any household
More informationINSTRUCTION MANUAL.
INSTRUCTION MANUAL www.zokuhome.com Welcome The patented Zoku Quick Pop Maker revolutionizes the way ice pops are made. Watch pops magically freeze before your eyes in minutes. The Quick Pop Maker works
More informationPremium Light Filtering Sheer Shade
Premium Light Filtering Sheer Shade Installation Instructions Email: customerservice@blindster.com Call us: (888) 256-8672 Mon - Fri 8am - 7pm (CT) Congratulations on purchasing a Premium Light Filtering
More informationRock, Roll n Ride Trike XLTM
Rock, Roll n Ride Trike XLTM Instructions Model Number: B9701 Rocking fun for littlest ones! Help toddlers roll along! Extra long handle for comfort. Remove handle for pedaling fun. Seat adjusts for growing
More informationDeluxe Exterior Solar Shades
Deluxe Exterior Solar Shades Installation Instructions Email: customerservice@blindster.com Call us: (888) 256-8672 Mon - Fri 8am - 7pm (CT) Thank you for purchasing Deluxe Exterior Solar Shades from Blindster.
More informationOwner s Guide. Pirouette Window Shadings. Standard EasyRise Rectangular And Two-On-One Headrail Shadings
Owner s Guide Pirouette Window Shadings Standard EasyRise Rectangular And Two-On-One Headrail Shadings Contents Introduction...3 Product View...4 Getting Started...5 Mount The Installation Brackets...6
More informationMirrorcraft Project Especially for Dogs
Mirrorcraft Project Especially for Dogs DIY Customized Pet Mirror Make a mirror photo frame to Display your Pets Photo Irene Jacobs April 2007 Mirrorcraft is a fun craft to easily create you own customized
More informationRock, Roll n Ride Trike TM
Rock, Roll n Ride Trike TM Instructions Model Number: 73528 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Age: 1 1 /2 years
More informationProduct Care & Cleaning Guide
Product Care & Cleaning Guide /5 CABINETRY CARE, CLEANING & ADJUSTMENT GUIDE AFTER INSTALLATION CARE After your cabinets have been installed, wipe down exteriors with a clean damp cloth. Work on a small
More informationNew Roman Shades WARNING. Installation Operation Care. Retractable Cord Lifting System
CHILD SAFETY Warning WARNING For more safety information call 1-888-501-8364 in the U.S. or 1-866-662-0666 in Canada. Young children can wrap cords around their necks and STRANGLE. Always keep cords out
More informationMaintenance Guide 11/12
Product Maintenance Guide 11/12 C abinetry Care, Cleaning & Adjustment Guide After installation care After your cabinets have been installed, wipe down exteriors with a clean damp cloth. Work on a small
More informationStuff-Your-Stuff Platform Bed (Twin and Full)
Stuff-Your-Stuff Platform Bed (Twin and Full) Pre-Assembly: Please read all instructions before beginning assembly. Assembly by two people is a must. Save all packing materials until assembly is complete
More informationSignal Mirror Installation Instructions Dodge Charger, Dodge Magnum, Chrysler 300
Signal Mirror Installation Instructions 2006-2009 Dodge Charger, 2005-2008 Dodge Magnum, 2005-2009 Chrysler 300 THE safety accessory of the 21st Century. P/N 210-0123-0 Rev. A4 (10/7/09), BTV 2007 Muth
More informationThe Bowflex Revolution XP Home Gym Assembly Instructions. P/N: Rev ( /0 )
P/N: 001-7057 Rev ( /0 ) The Bowflex Revolution XP Home Gym Assembly Instructions 2 Table of Contents Before You Start... 2 Tools You Will Need / Hardware Contents... 3 Box Contents... 6 Assembling Your
More informationGENUINE PARTS INSTALLATION INSTRUCTIONS
GENUINE PARTS INSTALLATION INSTRUCTIONS 1. 2. 3. 4. DESCRIPTION: APPLICATION: PART NUMBER: KIT CONTENTS: Kit G Coupe 999J2 JxxxxB4 (xxxx Designates model year and color) Item Qty. Description Part Number
More informationPercy Pumpkin Head Light A KraftyBlok project.
Percy Pumpkin Head Light A KraftyBlok project. DESIGNED BY: Jeanne Baruth for Diamond Tech SKILL LEVEL: (Adult 1-5: 1 being the easiest, 5 being most difficult) 3 TIME TO COMPLETE: 2 hours not including
More informationDo Art Pottery Studio Refill #14596
Additional clay and glaze paint available in the Do Art Pottery Studio Refill kit. www.greatartstartshere.com Do Art Pottery Studio Refill #14596 Airdry clay Translucent glaze paint Paint brush Instructions
More informationDASH KIT INSTALLATION
ÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿ ÿÿÿÿÿ ÿÿ ÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿ ÿÿÿÿ ÿÿ ÿÿÿÿÿ ÿÿÿÿÿÿÿÿ PROUDLY MADE IN THE USA DASH KIT INSTALLATION These instructions are aimed at the do-it-yourself installer. Read
More information10ft. Square Side Mount Item # 64443
10ft. Square Side Mount Item # 64443 A S S E M B L Y A N D O P E R A T I O N Thank you for your purchase of Frontgate s 10 Square Side Mount umbrella. Please remove all contents from the package, inspect
More informationSAVE THIS FOR FUTURE REFERENCE THIS PRODUCT IS FOR PROFESSIONAL LABORATORY USE ONLY USER'S MANUAL
DENTAL, INC. TECHNICAL BULLETIN Q827-022510 5860 FLYNN CREEK ROAD READ ALL INSTRUCTIONS P.O. BOX 106 BEFORE PROCEEDING COMPTCHE, CALIFORNIA, U.S.A. 95427 SAVE THIS FOR FUTURE REFERENCE www.wellsdental.com
More informationInstallation Instructions 8115F 8115SF
TM Installation Instructions 85F 85SF Single Control Centerset Lavatory Faucet with Speed Connect Drain Congratulations on purchasing your American Standard faucet with the Speed Connect Drain, a feature
More informationTP8300 series / TP7300 series TP6300 series / TP4300 series
PEDAL TIMPANI TP8300 series / TP7300 series TP6300 series / TP4300 series Owner s Manual English Thank you for purchasing a Yamaha Timpani. Please keep this manual in a safe and convenient place for future
More informationAKZ13 13 OC Cantilever. Assembly and Operation Guide
AKZ13 13 OC Cantilever Assembly and Operation Guide Thank you for your purchase of Treasure Garden s AKZ13 Cantilever Umbrella. Please remove all contents from the package, inspect and review checklist.
More informationInstruction Sheet Tool Kit [ ] (for SL Series 110 Jack Connectors)
Instruction Sheet Tool Kit 1725150 [ ] (for SL Series 110 Jack Connectors) 26 FEB 04 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
More informationThe Useless Machine. DIY Soldering Edition. Instruction Guide v0004
The Useless Machine DIY Soldering Edition Instruction Guide v0004 TM For the best outcome, follow each step in order. We recommend reading this guide entirely before you get started. Tools required: Soldering
More informationHorizontal Shadings. Installation & Operating Instructions
Horizontal Shadings Installation & Operating Instructions TABLE OF CONTENTS Getting Started: Mounting Types...3 Installation Components...3 Tools and Fasteners Needed...4 Product View...5 Installation:
More informationFoil Transfer Starter Kit
EN Foil Transfer Starter Kit About the Foil Transfer Starter Kit You can create high-quality designs by using the pressing tool to apply foil with your cutting machine. Important Safety Instructions WARNING
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63828-0200 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationClear jammed paper from the input tray Remove any jammed paper that is accessible from the input tray area.
Step 1: Clear jammed paper from the printer Paper jams can occur in multiple areas of the printer. If you cannot find the paper jam in one area, continue to the next area until the jam is located. note:
More informationRiverside. Windward Bay EntertaInment Wall System Assembly Instructions. Made In Viet Nam. Right Pier. Bridge & Back Panel.
EntertaInment Wall System Page 1 of 12 Product No. 42840 42848 42849 42843 Product Description Console Left Pier Right Pier Bridge & Back Panel Right Pier Bridge & Back Panel Left Pier 63" Inch Ent. Console
More informationFossils. Jackilee Taylor INTRODUCTION TIME NEEDED
5.8 Junior Science Experiments On File TM Fossils Jackilee Taylor INTRODUCTION Fossils are records of the past animal and plant life. The remains of the plants and animals were under heat and pressure
More informationFixed Upper Sash Replacement Guide for Andersen 400 Series Woodwright Springline Single-Hung Windows
Fixed Upper Sash Replacement Guide for Andersen 400 Series Woodwright Springline Single-Hung Windows Manufactured Between September 2005 and October 2006 Read all instructions carefully before attempting
More informationUSER MANUAL. No heat. No electricity. No batteries. Laminator Label Maker Magnet Maker. Sticker Maker. Makes items up to 9 wide. * Use it. anywhere!
MODEL 900 3 1 Use it anywhere! No heat. No electricity. No batteries. Makes items up to 9 wide. * Sticker Maker Laminator Label Maker Magnet Maker 2 * Adhesive cartridge 9 wide, all others 8.5 wide. USER
More informationINSTRUCTION MANUAL WOODY. By HAY
INSTRUCTION MANUAL WOODY By HAY INTRODUCTION Woody was originally designed for inventory use, but after much demand this ladder-inspired shelving system was soon put into commercial production. Woody
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS MODEL RTA - 4985 Thanks for purchasing one of our products. Please read carefully the assembly instructions before the installation. Please save this manual for future reference.
More informationInstallation, Operation and Care Instructions. Retractable Cord Operating System
Installation, Operation and Care Instructions Retractable Cord Operating System CONTENTS Getting Started: Product View... 1 Tools and Fasteners Needed... 2 Installation: Installation Overview... 3 Mount
More informationThanks for shopping with Improvements! Mandarin Tansu Step Cabinet Item #512735
Thanks for shopping with Improvements! Mandarin Tansu Step Cabinet Item #512735 This unit can be assembled so the top and middle cabinets are on the left or on the right. Use these instructions for a right-sided
More informationPortableTM. Indoor Outdoor Clothesline. Owner s Manual. TO SUIT MODELS: PortableTM 170 PortableTM 120
PortableTM Indoor Outdoor Clothesline Owner s Manual TO SUIT MODELS: PortableTM 170 PortableTM 120 Introduction Congratulations Congratulations on the purchase of your Portable Clothesline, which will
More informationMax Launch Abort System Prod. No *Kevlar is a registered trademark of Dupont
Flying Model Parts List Max Launch Abort System Prod. No. 3014 A 11820 - Body Tube 3.5 Diam x 5.5" Long B 11824 - Orange Capsule Base Shoulder Ring C 16032 - Laser-cut Ring motor mount rear D 16033 - Laser-cut
More informationApplication Tooling Specification
Order No. 63819-0901 Application Tooling Specification Type 4D FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision, user-friendly
More informationPlease read these instructions before use and keep for future reference
Wardrobe Assembly Guide Allen Key Provided (if required) Philips Screwdriver Required Hammer Required Please read these instructions before use and keep for future reference Caution! Two Person Assembly
More informationAllegro Home Office Assembly Instructions. Tipping Restraint. Bun Foot W/ Leveler. 4 pcs.
email: info@riverside-furniture.com Allegro Home Office Assembly Instructions Components and Hardware List Page 1 of 5 Made in China Shelf Pin Wood Shelf File Rod & Clips 1/2"Wood Screw A 16 pcs. B 4 pcs.
More informationATD TON BAR TYPE PULLER/BEARING SEPARATOR SET
ATD-3056 5-TON BAR TYPE PULLER/BEARING SEPARATOR SET Made in China to ATD Inc. Specifications WARNING: When using this tool, basic safety precautions should always be followed to reduce the risk of personal
More informationInstallation, Operation and Care Instructions. Continuous Cord Loop Operating System
Installation, Operation and Care Instructions Continuous Cord Loop Operating System CONTENTS Getting Started: Product View... 1 Tools and Fasteners Needed... 2 Installation: Installation Overview... 3
More informationsouthpaw enterprises, inc.
southpaw enterprises, inc. Instruction Sheet C-STAND 7100 Store these instructions in a safe place or with the enclosed maintenance checklist Take time to familiarize yourself with the use and maintenance
More informationTHE DIPPING TECHNIQUE
THE DIPPING TECHNIQUE An Alternative Finishing Technique By B. L. Herm Ely INTRODUCTION: A good finish should excite the senses. When touched with the finger tips, the finish should feel silky smooth.
More informationOWNER S MANUAL Table Tennis Table Patent Pending
OWNER S MANUAL Table Tennis Table Patent Pending Be sure to write your model number and serial number here for future reference. You can find these numbers printed on the bottom of the table. MODEL # T8266
More informationResin Tree Drop Earrings We look forward to bringing you exclusive innovations and distinctive products this year and beyond.
Resin Tree Drop Earrings We look forward to bringing you exclusive innovations and distinctive products this year and beyond. www.nunndesign.com www.nunndesign.com 1 SUPPLIES NEEDED: PE9217-2 Pewter Drop
More informationCleaning the cutter blade
Cleaning the cutter blade < Daily maintenance > In order to use this printer in good condition, please perform the daily maintenance. Note the following when performing the maintenance. Do not lubricate
More informationBasic Spring Motor Roller Shades
Basic Spring Motor Roller Shades ATTENTION!!! READ CAREFULLY! This shade has a reliable long-lasting Spring Motor. The Spring Motor must have proper tension in order to function as intended. Handling in
More informationInstallation And Care Instructions. Vertical Honeycomb Shades
Installation And Care Instructions Vertical Honeycomb Shades Rev 5/2013 Table Of Contents Getting Started... 3 Parts Overview... 4 Materials Required... 5 Tools Required... 6 Outside Mount Installation...
More informationNorthcote Wardrobe with Toy Box Base & Shelf L2988
Thank you for shopping with GLTC, we hope you enjoy having this product in your home. www.gltc.co.uk Northcote Wardrobe with Toy Box Base & Shelf L2988 We know assembling furniture, toys or accessories
More informationCOMPOSITES LAB MANUAL
COMPOSITES LAB MANUAL Version 1 Lab 3: Surface Preparation, Wet Layup, and Vacuum Bagging The original version of this manual was a one student senior design project written by Katherine White, the Composite
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-0000 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More information400 SERIES GRINDER PUMPS 41502, 42202,43302, AND MODELS
Section: MOYNO 500 PUMPS Page: 1 of 6 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 400 SERIES GRINDER PUMPS 41502, 42202,43302, AND 44402 MODELS DESIGN FEATURES Housing: Cast iron Pump Rotor: Chrome
More informationARLENE LINTON A LACE DOILY ART PLAY DATE 2015
ARLENE LINTON A LACE DOILY ART PLAY DATE 2015 A Lace Doily Palette (FolkArt): Vintage White (515) Brushes: Scharff Series 3000 Kolinsky Sable Round (#4) Surface: 8-inch Scooped Plate (#WPSCO) Available
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63825-8200 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationTP3100(EA) Series TP3123(EA) / TP3126(EA) / TP3129(EA) / TP3132(EA)
PEDAL TIMPANI TP3100(EA) Series TP3123(EA) / TP3126(EA) / TP3129(EA) / TP3132(EA) Owner s Manual Thank you for purchasing a Yamaha Timpani. Please read through this manual carefully as it contains important
More informationInstalling Brackets to Minimize Distortion in Your SMART Board 685ix Interactive Whiteboard System s Projected Image
UX60-RFK-685 Installing Brackets to Minimize Distortion in Your SMART Board 685ix Interactive Whiteboard System s Projected Image Follow these instructions to install brackets on your SMART Board 685ix
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 63827-1400 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationApplication Tooling Specification
Order No. 200218-2200 Application Tooling Specification Type 4D FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision, user-friendly
More informationUser s Manual VTech All rights reserved Printed in China US
User s Manual 2016 VTech All rights reserved Printed in China 91-003216-006 US Dear Parent, At VTech, we know how important the first day of school is for your child. To help prepare preschoolers for this
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 200218-2400 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationLEVOLOR. Sheer Shadings. Persianas traslúcidas Stores diaphanes INSTALLATION OPERATION CARE
LEVOLOR Sheer Shadings Persianas traslúcidas Stores diaphanes INSTALLATION OPERATION CARE INSTALACIÓN FUNCIONAMIENTO CUIDADO INSTALLATION FONCTIONNEMENT ENTRETIEN Sistema operativo sin cordón Système sans
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-1000 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationApplication Tooling Specification
Order No. 63828-1200 Application Tooling Specification Type 4D FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision, user-friendly
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory WELL P/N 08P21-STX-200A Application 2011 MDX Publications No. BII 43668 Issue Date AUG 2010 PARTS LIST Left front fender trim Bracket A-L Left front bumper trim Bracket
More informationEerie Halloween by Nunn Design
Eerie Halloween by Nunn Design Approximate finished length: 20 inches Beads and other products needed for necklaces: 1 - Pewter Itsy Square Bezel Pendant with Flat Loop by Nunn Design - Antique Gold -
More informationApplication Tooling Specification Sheet
Tool Kit Order No. 63823-6470 FEATURES Application Tooling Specification Sheet Hand Crimp Tool Order No. 63823-6400 % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically designed
More informationOrder Number
Order Number 200218-5500 FEATURES Application Tooling Specification TYPE 4D A full-cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly
More informationParaffin Wax System. Instruction Manual PAR-100-2EU
Paraffin Wax System Instruction Manual PAR-100-2EU READ ALL INSTRUCTIONS BEFORE USE. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. IMPORTANT SAFEGUARDS WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN CHILDREN
More informationStained Glass Mission-Style Frame A stained glass project
Stained Glass Mission-Style Frame A stained glass project Stained Glass Mission-Style Frame A Stained Glass Project PROJECT TITLE: Stained Glass Mission-Style Frame SKILL LEVEL: (Adult 1-5: 1 being the
More informationRhino Packing Gland Tool
Instruction Sheet P/N Rhino Packing Gland Tool 1. Description See Figure 1. The Rhino packing gland tool is used to remove the packing gland from Rhino bulk unloader pumps. The tool consists of two components,
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-0400 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationThanks for shopping with Improvements! 7 ft. Wall Christmas Tree w/ Stand Item #419359
Thanks for shopping with Improvements! 7 ft. Wall Christmas Tree w/ Stand Item #419359 IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY. PARTS LIST: NOTES: (1) Tree Section A (1) Tree Section B (1)
More informationAutoSeal FD 2006IL / FE 2006IL
AutoSeal FD 2006IL / FE 2006IL FI / FJ Series 06/2018 OPERATOR MANUAL First Edition TABLE OF CONTENTS DESCRIPTION 1 SPECIFICATIONS 1 UNPACKING 1 SETUP 2 Sealer Alignment Base Setup 2 Sealer Setup 2-4
More informationInstall Instructions for Solano Jurastone #4012 Mantel
Install Instructions for Solano Jurastone #4012 Mantel Please read this manual before installing the suite. This manual should remain with the homeowner. Updated 12/03/12 NOTE the installation requirements
More informationRugged Ridge Body Armor Guard Kit, 5 Pieces, Black (07-Current JK 4-door)
Rugged Ridge Body Armor Guard Kit, 5 Pieces, Black (07-Current JK 4-door) Installation Time: 60 Minutes Tools Required: Notes: Phillips head screwdriver 3/8 socket or Flat head screwdriver 1/2 socket 7
More informationInstallation. Operation. Care. Pirouette Window Shadings. EasyRise and UltraGlide Lifting Systems and Two-On-One Headrail Shadings
Installation Operation Care Pirouette Window Shadings EasyRise and UltraGlide Lifting Systems and Two-On-One Headrail Shadings CONTENTS Getting Started: Product View...1 Tools and Fasteners Needed...2
More informationUser s Manual. abc Text & Go Motion VTech Printed in China
User s Manual abc Text & Go Motion 2012 VTech Printed in China 91-001633-007 INTRODUCTION Thank you for purchasing the VTech abc Text & Go Motion. The abc Text & Go Motion combines preschool curriculum
More informationMaking Homemade Paper
Making Homemade Paper Summary The art and business of paper-making dates back about 2000 years ago! At that time, a Chinese government official named Ts ai Lun was the first to develop a paper-making method
More informationVinyl Installation Guide and Tips
Vinyl Installation Guide and Tips Tools Needed: Squeegee; Grease Pencil (white or blue only!); 2" & 1/4" Masking Tape Prepare your surface and vinyl as outlined on back cover prior to employing this technique
More informationROMAN AND. Roller Lift System Continuous Cord Loop GETTING STARTED BRACKET INFORMATION INSIDE MOUNT. A few simple tools are required:
ROMAN AND WOVEN WOOD SHADES Roller Lift System Continuous Cord Loop GETTING STARTED BRACKET INFORMATION A few simple tools are required: The brackets you received with your product are REQUIRED for proper
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 63819-0100 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationRETAIN PACKAGING DURING INSTALLATION Do NOT discard packaging materials until installation is complete CONTACT US BEFORE RETURNING
4 3 6 5 4 3 1 Advanced Screen Systems Recessed Mount Premium Security Storm Door Advanced Screen Systems Installation Instructions Read completely through the installation instructions before proceeding
More informationProduct must be installed as shown using the screws and brackets provided. Use of incorrect hardware could result in damage to the product.
General Notes These installation instructions are intended to be comprehensive for a typical Keyeira/Presto configuration. Your configuration may differ. If you have questions contact Geiger Customer Service
More informationProduct Number: Instructions. Please save these instructions for future reference. Adult assembly is required. No tools needed for assembly.
Fort Dakota Product Number: 77029 Instructions Please save these instructions for future reference. Adult assembly is required. No tools needed for assembly. If you have any questions, please call Fisher-Price
More informationApplication Tooling Specification
Order No. 63828-2000 Application Tooling Specification Type 4G FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomically designed soft handles Precisely designed crimping profiles
More informationDusty Harp Pickup for lever harps
q P10 for 24 30 string harps q P20 for 32 40 string harps Dusty Harp Pickup for lever harps Installation Kit Contents and Diagram of Pickup A. Pickup Element B. Grommet C. Pickup Harness D. Jack E. F.
More informationES3640e MFP Technician s Installation Guide
Technician s Installation Guide Configuration A with High Capacity Feeder HCF.jpg Configuration B with Second Tray and Cabinet cab.jpg With optional Finisher: ES3640e MFP 01_Finis her.jpg 1 Warning Icon.jpg
More informationInstruction for applying the Logo Decals
Instruction for applying the Logo Decals Supplied: *One set of N/C cut vinyl decals (one right and One left) (Note: packaged with the contoured wing tip plans) Items required to apply the decals (not supplied):
More informationPlease read carefuly before using. Aerobic Lateral Trainer ASSEMBLY MANUAL H901
Please read carefuly before using. Aerobic Lateral Trainer ASSEMBLY MANUAL H901 TABLE OF CONTENTS 1 IMPORTANT SAFETY INFORMATION 2 Important Safety Precautions 2 Weight Limit Capacities 2 Warning 2 2
More informationUSER GUIDE Crystal - Hardware Mount
USER GUIDE Crystal - Hardware Mount Height 30.7" (78 cm) Minimum Opening 29.5" (75 cm) Maximum Opening 39.75" (101cm) IMPORTANT: Qdos wants to keep your children safe and for that we need you to do your
More informationBoink Kiosk System Administration Manual
Boink Kiosk System Administration Manual Last updated on May 21st, 2002 Table of Contents INTRODUCTION Boink Kiosk System...2 Safety Precautions...3 KIOSK SYSTEM NORMAL OPERATION SF6 Kiosk General Description
More informationINSTALLATION AND CARE INSTRUCTIONS
INSTALLATION AND CARE INSTRUCTIONS Vertical Applications Honeycomb Shades CONTENTS Introduction...2 Before You Begin...3 Vertical Application Parts Overview...4 Materials Required...5 Tools Required...6
More informationApplication Tooling Specification Sheet
Hand Crimp Tool Application Tooling Specification Sheet TYPE 4D Order No. 63819-1300 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping
More informationInstallation INSTALLING THE WINE COOLER SITE PREPERATION
Installation INSTALLING THE WINE COOLER Your Electrolux wine cooler has been designed for either free-standing or built-in installation(refer to the Built-in Installation section of this manual for instructions).
More informationARROW SAW PRECISE CUT 8000 RPM WITH DUST COLLECTING ATTACHMENT INSTRUCTION BOOK MODEL NO
ATTENTION If any components of this unit are broken or the unit does not operate properly, please contact Cabela s Customer Service. Retail Store Purchases: 1-800-905-2731 (U.S. & Canada) Catalog and Internet
More informationHR175 Sash Replacement Kit Installation Instructions
HR175 Sash Replacement Kit Installation Instructions IMPORTANT: Please read before you begin. Weather Shield HR175 Sash Replacement Kits Important: Thoroughly read and follow these instructions, failure
More information5. Carefully remove the printer from the lower boxed foam support and place it on a solid, level base where it will be used
PROJET 1200 QUICKSTART GUIDE Before you get started you will need: Lint-free paper towels A pair of nitrile gloves Saftety glasses OPENING YOUR PROJET 1200 NOTE: Make sure you save all of your packaging
More information