10ft. Square Side Mount Item # 64443
|
|
- Logan Manning
- 6 years ago
- Views:
Transcription
1 10ft. Square Side Mount Item # A S S E M B L Y A N D O P E R A T I O N
2 Thank you for your purchase of Frontgate s 10 Square Side Mount umbrella. Please remove all contents from the package, inspect and review checklist for all parts. CAUTION: To reduce personal injury and damage to your umbrella, read and follow this Assembly and Operation information. C H E C K L I S T : A - Base Shell and Base Lid B Rotating Hub C - Foot Pedal D-Main Frame E - Removable Crank Handle F - Main Frame Grip Handle G- Main Arm H- Canopy I - Umbrella Light Adapter G H F E I D B C A Base Shell Base Lid Base Parts Boxed Separately REQUIRED FOR ASSEMBLY: 200 lbs. playground sand (not included). 1
3 PARTS LIST Part Description Qty. 1 Base Shell 1 2 Base Lid 1 3 Steel Wrench 1 4 Inverted Base Stem 1 5 Inverted Plate 1 6 Playground Sand (not included) 200 lbs. 7 Large Hexagon Wrench 1 8 Main Frame and Rotating Hub 1 9 Crank Lift Handle 1 10 Small Hexagon Wrench 1 11 Hub Bolts 4 12 Plate Bolts 4 13 Washers 4 IMPORTANT: Prior to assembly it is important to decide on the location of the umbrella. Allow ample height to avoid damage to your umbrella during assembly and usage. Choose a location that is level and sturdy. Avoid any sloping or soft ground. Consider a location that will maximize the umbrella s rotating swivel function. Placing the umbrella between two entertaining areas is ideal. NOTE: Some parts may be included in the styrofoam packaging. DO NOT discard any packaging or box until assembly is complete. REQUIRED FOR ASSEMBLY: 200 lbs. playground sand (not included). NOTE: Do not put or allow sand into the center of the base shell. 2
4 S T E P 1 Base Assembly Select area to set base and place in desired location. NOTE: Moving the umbrella will be difficult once fully assembled. Remove inverted plate from inverted base stem (Fig. 1). Remove the inverted base stem by using the steel wrench (provided) turning counter-clockwise (Fig. 2), now remove base lid from base shell (Fig. 3). Return inverted base stem to base shell, to keep sand out of base stem channels. (Fig. 4) IMPORTANT: Do not allow sand to spill inside the base stem channels, as it will impede further installation. Now, fill each section of the base shell with dry playground sand (Fig. 5). The base holds up to 200 lbs. of sand. NOTE: Base weight will be 250 lbs. after sand is added. Now, remove inverted base stem (Fig. 6) from base shell. Place base lid back onto base shell and re-install the inverted base stem (Fig. 7). IMPORTANT: Carefully, as you tighten the inverted base stem, you will notice clicking/ratcheting sound. Please make sure it is between CLICKS. Do not over tighten inverted base stem or parts may be damaged. Steel Wrench (Fig. 1) (Fig. 2) (Fig. 3) Base Stem Channels (Fig. 4) (Fig. 5) (Fig. 6) (Fig. 7) 3
5 S T E P 2 Umbrella Assembly NOTE: Two-persons recommended for team lift and the rest of the assembly. Remove rotating hub from the main frame by removing the (2) main frame bolts (Fig. 8), set aside bolts for later use. Now, attach the inverted plate to the rotating hub by tightening with the (4) plate bolts (Fig. 9). Attach rotating hub (with inverted plate) to inverted base stem by tightening with the (4) hub bolts and (4) washers (Fig. 10). Assemble main frame onto hub and lower carefully. Insert the two bolts on bottom portion of main frame and tighten using large hexagon wrench provided (Fig. 11). DO NOT OVER-TIGHTEN. Locate the crank lift handle and install onto the crank mechanism located on the main frame. Use the small hexagon wrench provided to lock in the small screw (Fig. 12). REMOVE ALL PLASTIC PACKAGING MATERIAL FROM ALL PARTS PRIOR TO OPENING UMBRELLA. CHECK UNDER CANOPY FOR PACKAGING AROUND RIBS. Your umbrella is now ready to operate! Large Hexagon Wrench (Fig. 8) (Fig. 9) (Fig. 10) Large Hexagon Wrench Small Hexagon Wrench (Fig. 12) (Fig. 11) 4
6 S T E P 3 Opening Umbrella From closed position, turn the crank clockwise while disengaging main frame grip handle and guiding up main frame (Fig. 13), until the umbrella is fully opened (Fig. 14) and the hub is at the top most position (Fig. 15). Tilt umbrella to desired position. See Step 4 for tilt operation. NOTE: When cranking umbrella open, if you feel resistance and the umbrella is not opening, do not force the crank. Gently spread umbrella ribs with hands, then continue to crank open. (Fig. 13) (Fig. 14) Hub (Fig. 15) 5
7 S T E P 4 Tilting Umbrella To tilt umbrella, squeeze the main frame grip handle (Fig. 16) and slide handle to desired tilt position (Fig. 17). Release main frame grip handle to lock into tilt position. Horizontal Position Hole Tilt Position #1 Hole (Fig. 16) Tilt Position #2 Hole Tilt Position #3 Hole Tilt Positions (Fig. 17) Horizontal/Open Position Tilt Position #1 Tilt Position #2 Tilt Position #3 6
8 S T E P 5 Closing Umbrella To close umbrella, squeeze main frame grip handle (Fig. 18) and slide grip handle down to closed position (Fig. 19) while turning crank handle counter-clockwise (Fig. 20) until umbrella is closed (Fig. 21). Use ties to secure canopy to the main frame when umbrella is not in use. (Fig. 18) (Fig. 19) (Fig. 20) (Fig. 21) 7
9 Rotating Features To OPERATE the 360 Rotating Hub Swivel: Place your foot on the foot pedal of the rotating hub and step-on the base pedal to release rotating lock (Fig. 22). Place hands on the main frame (Fig. 23) and swivel the umbrella frame in either direction until desired position is reached (Fig. 24). Step off the foot pedal to engage rotating lock and lock position (you will hear the pedal click, as it reaches the next available lock position). (Fig. 22) (Fig. 23) (Fig. 24) 8
10 Umbrella Light Features To ATTACH Umbrella Light: Loosen the light adapter built into the umbrella runner by turning counter-clockwise (Fig. 25). After loosening, pull down light adapter post (Fig. 26) to attach the umbrella light (sold separately). (Fig. 25) (Fig. 26) 9
11 SAFETY PRECAUTIONS: Close the umbrella in windy conditions or when a storm approaches. Never allow the umbrella to flap in the wind; this could damage the canopy. Do not leave open umbrella unattended. If damage occurs, this is not covered by the warranty. When adjusting the umbrella, make sure that no person(s) or item(s) are close to the umbrella. This is important to prevent injury or material damage. CARE AND MAINTENANCE: When not in use, close and cover umbrella with a protective cover. Allow a wet canopy to dry opened up. If necessary, clean the fabric with lukewarm water, mild detergent, and a sponge. Wipe sliding marks on the aluminum poles with a damp cloth. Winter Storage: Store in a dry place. Any visible defects must be repaired by a professional. After the Winter: Areas subject to turning and sliding can be treated with a non-staining lubricant spray (silicone-based). Check the condition and function of the umbrella. Any defects must be repaired by a professional. 10
12 Our Quality Commitment At Frontgate, our primary focus is quality. We guarantee that every product we sell will stand up to the supreme test our customers satisfaction. Our One-Year Guarantee lets you put any Frontgate product to the test. If for any reason you are not satisfied, simply return it within 90 days and we ll replace it or refund the cost of the item (excluding Shipping and Processing fees). In addition, we will repair or replace any product for a full year from the date of purchase. Please note: Any items that are monogrammed, customized or made-toorder cannot be returned or exchanged unless damaged or defective. All returned items must be in their original packaging and in the condition in which they were received. Please wrap your item carefully; package and ship it so that damage does not occur. Follow the return process instructions on the pack slip or visit our website for more information regarding returns. Please contact one of our Product Specialists for assembly assistance or questions at or ps@frontgate.com. Specialists are available weekdays 8:00 a.m. to 8:00 p.m. EST or Saturday 9:30 a.m. to 6:00 p.m Frontgate, Inc. - All Rights Reserved. Revised 6/13
AKZ13 13 OC Cantilever. Assembly and Operation Guide
AKZ13 13 OC Cantilever Assembly and Operation Guide Thank you for your purchase of Treasure Garden s AKZ13 Cantilever Umbrella. Please remove all contents from the package, inspect and review checklist.
More informationBali. I n s t r u c t i o n M a n u a l. Cantilever. 11 Octagon / SSAD Square / SSAD45-10SQ
Bali Cantilever 11 Octagon / SSAD45-11 10 Square / SSAD45-10SQ I n s t r u c t i o n M a n u a l Thank you for your purchase of SimplyShade s Bali Cantilever Umbrella. Please remove all contents from the
More informationSantorini. Instruction Manual. Cantilever. 10 Round / SSAG9-10
Santorini Cantilever 10 Round / SSAG9-10 Instruction Manual Thank you for purchasing SimplyShade s Santorini Cantilever Umbrella. Please remove all contents from the package, inspect and review checklist.
More informationAG25T/AG25TSQ 11.5 OC/10 SQ Cantilever. Assembly and Operation Guide
AG25T/AG25TSQ 11.5 OC/10 SQ Cantilever Assembly and Operation Guide Thank you for purchasing Treasure Garden s AG25T Cantilever Umbrella. Please remove all contents from the package, inspect and review
More informationAG19 10 OC Cantilever. Assembly and Operation Guide
AG19 10 OC Cantilever Assembly and Operation Guide Thank you for your purchase of Treasure Garden s AG19 Cantilever Umbrella. Please remove all contents from the package, inspect and review checklist.
More informationCapri. I n s t r u c t i o n M a n u a l. Balcony Umbrella x 6.93 Rectangle / SSBU-5X7RT5T
Capri Balcony Umbrella 4.95 x 6.93 Rectangle / SSBU-5X7RT5T I n s t r u c t i o n M a n u a l Thank you for your purchase of SimplyShade s Capri Balcony Umbrella. Please remove all contents from the package,
More information13401 Brooks Drive Baldwin Park, CA p f shademakerusa.com
13401 Brooks Drive Baldwin Park, CA 91706 p 626.338.8810 f 626.338.8816 info@shademakerusa.com shademakerusa.com 2018 Shademaker. All rights reserved. SMOM-ORION-0718 W A R R A N T Y : Upon receipt of
More informationBig & Tall Executive Chair Assembly Instructions
Designed to be comfortable, and built to stay that way. Big & Tall Executive Chair Assembly Instructions 400 lbs Model 50106E PARTS A B C D Casters Quantity: 5 Star Base Quantity:1 Gas Lift Quantity: 1
More informationElectric Skein Winder
Electric Skein Winder Assembly and Use Package Contents 1 - Triangular Body (w/ motor) 1 - Cross Arm 1 - Left Foot (w/ yarn guide) 1 - Right Foot 1 - Adjustable Finger (w/ yarn clip) 3 - Adjustable Fingers
More informationCABANA / PAVILION ASSEMBLY ALUMINUM FRAME MODELS
Assembled cabanas are large & heavy. Assemble at place of use. CABANA / PAVILION ASSEMBLY ALUMINUM FRAME MODELS Step 1 CAUTION: To avoid damage to the finish of your Cabana frame, prepare a smooth, non-scratch
More information10' ROUND OFFSET WITH X BASE
10' ROUND OFFSET WITH X BASE 08807249-1 8-48681-066-1 Thank you for your purchase Thank you for your purchase! We are pleased that you have chosen Sears for your outdoor furniture purchase. We hope that
More informationMODEL 83 Pail Handler
MORSE MFG. CO., INC. 727 West Manlius Street P.O. Box 518 East Syracuse, NY 13057-0518 Phone: 315-437-8475 Fax: 315-437-1029 Email: service@morsemfgco.com Website: www.morsemfgco.com COPYRIGHT 2005 MORSE
More informationFLEX UMBRELLA INSTRUCTIONS FOR ASSEMBLY AND RECOMMENDATIONS FOR USE
FLEX UMBRELLA INSTRUCTIONS FOR ASSEMBLY AND RECOMMENDATIONS FOR USE READ THIS HANDBOOK IMMEDIATELY These instructions have to be handed over to the end-user of the product who has to read and keep them.
More informationStar Trac Turbo Trainer Assembly & Setup
Star Trac Turbo Trainer Use the following procedures to unpack and assemble your Turbo Trainer manufactured by Star Trac. UNPACKING AND PARTS LIST Position the shipping carton so the Heavy End logo is
More informationPlease read these instructions before use and keep for future reference
Wardrobe Assembly Guide Allen Key Provided (if required) Philips Screwdriver Required Hammer Required Please read these instructions before use and keep for future reference Caution! Two Person Assembly
More information11ft Round Offset Umbrella with Resin Base Assembly and User Manual
11ft Round Offset Umbrella with Resin Base Assembly and User Manual SKU# 272-1744 ITEM: UMB-940120 The schematics in this manual are for assembly and operation illustration only. They may differ from the
More informationGlenwood Canyon Collection Item No. OF-1021
Glenwood Canyon Collection Item No. OF-02 For assistance with assembly, please contact DTYStore.com Customer Satisfaction Center 866-27-855. CS@DTYStore.com Made in Vietnam Glenwood Canyon Collection OF-02
More informationHEIGHT ADJUSTABLE WORKBENCH
HEIGHT ADJUSTABLE WORKBENCH Model 91 ASSEMBLY and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in
More informationSAVE THESE INSTRUCTIONS
SAVE THESE INSTRUCTIONS SONOMA 10.5 FT CANTILEVER UMBRELLA ASSEMBLY INSTRUCTIONS ASSEMBLE ON A FLAT, PROTECTED SURFACE. PART LIST FIGURE QUANTITY DESCRIPTION A LOWER BRACKET B UPPER BRACKET C BASE POLE
More informationLCD/Plasma Mount Manual
LCD/Plasma Mount Manual Product Overview: Thank you for your Cheetah Mount purchase. All Cheetah Mounts are designed to provide excellent function, high quality, easy installation and stylish appearance.
More informationLifeGear G1 /HOME GYM ITEM NO.: 63100
LifeGear G1 /HOME GYM ITEM NO.: 63100 OWNER S MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain this owner s manual for future reference. The specifications of this product
More informationMODEL W1.0X305A(12 ) MODEL W1.0X610A(24 ) HAND BENDING BRAKE ASSEMBLY&OPERATING INSTRUCTION
MODEL W1.0X305A(12 ) MODEL W1.0X610A(24 ) HAND BENDING BRAKE ASSEMBLY&OPERATING INSTRUCTION 1 SAVE THIS MANUAL You will need the manual for the safety warning and precautions, assembly instructions, operating
More informationCFT STRENGTH TRAINING SYSTEM OWNER'S MANUAL
CFT STRENGTH TRAINING SYSTEM OWNER'S MANUAL Serial Number Location SERIAL 8 Record your Serial number and purchase date here: S/N PURCH.DATE: DEALER: Scan this QR code with your PortableDevice to link
More informationPLANISHING HAMMER STAND OWNER S MANUAL
PLANISHING HAMMER STAND OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationBig Sky Counter Height Table
LOT NUMBER: ATE PURCHASE: / / Big Sky Counter Height Table Model # BSKY-6806 AULT ASSEMBLY REQUIRE If you have any questions regarding assembly or if parts are missing, O NOT return this item to the store
More informationContents 2. Warranty. Assembly Instructions. Lack of original receipt will void warranty.
Contents 2 Warranty 15 Page #3 Page #4 Page #5 Page #7 Page #13 Introduction Getting Started Parts List Assembly Instructions Warranty Exclusion: Damage caused by acts of nature Wind damage Failure caused
More informationMARCY CLASSIC MCB-252 COMBO BENCH W/120 lbs Weight Set
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruction MARCY CLASSIC MCB-252 COMBO BENCH W/120 lbs Weight Set Exploded
More informationITEM#:DNSW5102J PK IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. St. Thomas Swivel Rocking Dining Chair
ITEM#:DNSW5102J-48019-2PK IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY St. Thomas Swivel Rocking Dining Chair Customer Service E-Mail : customerservice@foremostgroups.com 8:30a.m. 5:00p.m. EST,
More informationSerenata. I n s t r u c t i o n M a n u a l. Umbrella Light SS-SERENATA POWER FM/AM F/C P/S DOWN UP VOL- VOL+ TIME
Serenata Umbrella Light SS-SERENATA POWER FM/AM TIME F/C P/S DOWN UP VOL- VOL+ I n s t r u c t i o n M a n u a l Thank you for your purchase of SimplyShade s Serenata Wireless Umbrella Light and Media
More informationModels 2230 and 2240
Models 2230 and 2240 Overview... 2 Tools Needed... 2 Hardware...3 Assembly... 4-13 Installation... 14 Drawer Removal... 15 Operation... 15 Maintenance... 15 Accessories... 16 Limited Warranty... 16 Perform
More information10-PIECE. Garage Storage Set OWNER'S MANUAL. Patent pending
10-PIECE Garage Storage Set OWNER'S MANUAL Patent pending IMPORTANT When you open the cartons, carefully check the units and make sure there IS NO damage. If you have any problems with the units or with
More informationInstallation Guide Installation Kit for Mounting Philips MP20/30/40/50 on Datex-Ohmeda Aisys Anesthesia Machine
Installation Guide Installation Kit for Mounting Philips MP20/30/40/50 on Datex-Ohmeda Aisys Anesthesia Machine The purpose of this guide is to: 1. Describe mounting of Counterweight (page 2). 2. Describe
More informationASSEMBLY AND ADJUSTMENT
EDGE MONITOR ARM EDGE Rev A 2/17 Model EDGE-SLV Model EDGE-BLK Model EDGE-WHT ASSEMBLY AND ADJUSTMENT EDGE MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and
More informationSTRINGING MACHINE OWNER'S MANUAL. Copyright 1998 GAMMA Sports - All Rights Reserved
6002 STRINGING MACHINE OWNER'S MANUAL Issue 3 - June 20, 1998 Copyright 1998 GAMMA Sports - All Rights Reserved 6002 OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... FEATURES PAGE 3... ASSEMBLY
More informationCOMPETITOR WM-203 COMBO BENCH
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier COMPETITOR WM-203 COMBO BENCH Assembly Instruction Exploded Diagram Parts List
More informationGroundControl. Follow instructions contained in this manual. Incorrect installation could result in serious injury or damage to property.
GroundControl TM use supplied hardware Use only hardware supplied in your GroundControl kit or supplied by an authorized YAKIMA dealer. Use of unauthorized parts in the GroundControl system could result
More informationConstable Oak Extension Dining Table
Constable Oak Extension Dining Table Assembly Instructions - Please keep for future reference 176/0325 Dimensions Width - 160/ 200cm Depth - 90cm Height - 75cm Important - Please read these instructions
More informationtiverton offset umbrella style # YJAF-013T dpci # >>assembly instructions
tiverton offset umbrella style # YJAF-013T dpci # 009050540 >>assembly instructions TM Congratulations on your latest Target purchase. Now what? Don't start sweating over this box of parts. This will be
More informationOwners Manual AGBAY Single Blade Levelers (20 Agbay & 12 Agbay Jr.)
Owners Manual AGBAY Single Blade Levelers (20 Agbay & 12 Agbay Jr.) Made In USA Adjustment Knobs Adjustment Rod Frame Stainless Steel Blade Stainless Steel Scales Feet Blade Guard Jr. Model Shown Agbay
More informationOPERATION MANUAL MODEL
OPERATION MANUAL MODEL 60-511504 SUPPLIER CODE: GO-60-511504 BREEZER MESH OFFICE TASK CHAIR - GRAY/BLACK CUSTOMER SERVICE For fastest service, please visit our website at www.comfortproducts.net/support
More informationPOWER TOWER OWNER S. Item #1720
POWER TOWER OWNER S Item #1720 TABLE OF CONTENTS SERVICE ------------------------------------------------------------------------- 2 IMPORTANT LABELS --------------------------------------------------------
More informationSteele TV Stand Stock # BH
LOT NUMBER: DATE PURCHASED: / / Steele TV Stand Stock # BH46-084-899-02 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store
More informationMM340 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MM30 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on PAGE.
More informationThe Bowflex Revolution XP Home Gym Assembly Instructions. P/N: Rev ( /0 )
P/N: 001-7057 Rev ( /0 ) The Bowflex Revolution XP Home Gym Assembly Instructions 2 Table of Contents Before You Start... 2 Tools You Will Need / Hardware Contents... 3 Box Contents... 6 Assembling Your
More informationPlease read and understand the OnBoard Timpani Cart Owner s Manual before using the Timpani Cart.
Assembly and Owner s Manual OnBoard Timpani Cart Performance Position Towing Position CONTENTS Important User Information...........................2 General......................................2 Manufacturer.................................2
More informationImportant Notice. caution: Use proper lifting equipment and correct procedures to avoid injury.
Integrity. Partnership. Quality. COMMERCIAL DOOR INSTALLATION INSTRUCTIONS SERIES 1900, 1950, 2000, 2250, 2500, 2750 Important Notice In the following text, the word: Warning: Indicates that serious injury
More informationPART #MSP-DCCST Flat Panel Tilt Mount
INSTALLATION INSTRUCTIONS PART # Flat Panel Tilt Mount The Flat Panel Tilt Mount is a quick disconnect mounting solution for flat panel displays. The mount features adjustability between 0 and 15 degrees
More informationPORTLAND COLLECTION ARMCHAIR
PORTLND OLLTION RMIR PRODUT N0. 088-78-0 SSMLY INSTRUTIONS Toll-free: -888-670-668 IMPORTNT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference.
More informationMultipurpose Overbed Table
Multipurpose Overbed Table User s Guide AFTER SALES SUPPORT USA (800) 407 458 ITEM #44576 Contents 0 Introduction Intended use p. 04 NOTE Pay attention to important information and notes when reading the
More informationOwners Manual AGBAY Double Blade Levelers
Owners Manual AGBAY Double Blade Levelers (20 Agbay & 12 Agbay Jr. ) Made in USA Lower Blade Adjustment Knob Stainless Adjustment Rod Stainless Steel Blades Upper blade frame Lower blade frame Scale for
More informationHalo Umbrella Light. Assembly and Operation Guide
Halo Umbrella Light Assembly and Operation Guide Thank you for purchasing Treasure Garden s Halo Umbrella Light. Please remove all contents from the package, inspect and review checklist. CAUTION: To reduce
More informationEDGE2 DUAL MONITOR ARM
EDGE2 DUAL MONITOR ARM EDGE2 Rev A 2/17 Model EDGE2-SLV Model EDGE2-BLK Model EDGE2-WHT ASSEMBLY AND ADJUSTMENT EDGE2 DUAL MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning
More informationKD Table Base Assembly and Top Attachment Instructions
KD Table Base Assembly and Top Attachment Instructions 4011xx 5000xx 7014xx 8001xx 8206xx Congratulations on the purchase of your Tropitone furniture. Read through all steps before starting assembly. CAUTION:
More informationOnBoard Bass Drum/Gong Cart
Assembly and Owner s Manual OnBoard Bass Drum/Gong Cart CONTENTS Important User Information...................................................................2 Safety...................................................................................3
More informationOWNER S MANUAL. Sears Kendall 6PC Dining Set * Swivel Rocker. Product Code:D71 M80917 UPC Code: Date of Purchase: / /
OWNER S MANUAL Sears Kendall 6PC Dining Set * Swivel Rocker Product Code:D71 M80917 UPC Code: 7-22938-07967- Date of Purchase: / / If you have any problems with this product, DO NOT RETURN IT TO THE STORE.
More informationAUC Cell Assembly Torque Stand. User Manual
AUC Cell Assembly Torque Stand User Manual WARRANTY Spin Analytical Inc., warrants this product to be defect free in both material and workmanship for 90 days from the date of shipment. Labor services
More informationTilting, Swiveling & Rotating Flat Panel Wall Mount
Tilting, Swiveling & Rotating Flat Panel Wall Mount Model: VXA980TC +5 to -5 +5 to -5 Supports most 0-80 Flat Panel TVs Maximum Weight Capacity: 32 lbs. Supports VESA Sizes up to 600x500 For technical
More informationKIT ASSEMBLY INSTRUCTIONS
JUMPING JACK TRAILER KIT KIT ASSEMBLY INSTRUCTIONS A torque wrench (provided in the in-store tool kit) is required to assemble this trailer kit. Torque is a twisting (ft.-lb.).copy force measured in foot-pounds
More informationOwner s Manual ODYSSEY BENCH MODEL. O4100B shown REV E. Southern Avenue, Phoenix, AZ USA Workhorseproducts.
Owner s Manual ODYSSEY BENCH MODEL O4100B shown 67-1375 REV 218 3730 E. Southern Avenue, Phoenix, AZ 85040 USA 800-778-8779 Workhorseproducts.com 1 Table of Contents I. Introduction & Safety Information.
More informationVIBRATORY SCREED OPERATOR S MANUAL AND PARTS BOOK
VIBRATORY SCREED OPERATOR S MANUAL AND PARTS BOOK 31 SUN PAC BLVD. BRAMPTON ONTARIO L6S 5P6 PHONE: 866-501-5484 FAX: 905-458-5484 TABLE OF CONTENTS Specifications Page 1 Engine Assembly Page 2 5 Base Section
More informationASSEMBLY ASSEMBLY. Step 3 Requires D, E
φ Model No. 088-1328-8 Model No. 088-1328-8 Note: When using bolts and nuts to assemble the product, always use a flat washer between the frames and the bolt and/or nut. This will protect the parts from
More informationAssembly Instructions for Model: SD115
Assembly Instructions for Model: SD115 Thank you for choosing a Sanus Systems desk mount. The SD115 is designed to mount LCD flat panels with a VESA (Video Electronics Standards Association) hole pattern
More informationN. 15th Street, Middlesboro, KY FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS
1-800-248-7717 1002 N. 15th Street, Middlesboro, KY 40965 FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS Congratulations on your purchase of a Mountain Flip Tarp Dump Body tarping system. With tarping systems
More informationOWNER'S MANUAL Issue 2 - December 14, 2000
OWNER'S MANUAL AL Issue 2 - December 14, 2000 Copyright 2000 GAMMA Sports - All Rights Reserved Provided by www.gssalliance.com OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2...FEATURES PAGE
More informationAssembly Instructions and Owner s Manual Flex TechBridge
Assembly Instructions and Owner s Manual Flex TechBridge Contents Important User Information...........................2 Safety Precautions.................................2 Required Tools.....................................3
More informationFull Motion Gas Spring TV Wall Mount - 24" to 55" Installation Instructions
Full Motion Gas Spring TV Wall Mount - 24" to 55" Installation Instructions 04-1102A Caution Prior to installation of this product, the installation instructions should be read and completely understood.
More informationWOLF PUP LOOM TM & WOLF PUP LT LOOM TM
WOLF PUP LOOM TM & WOLF PUP LT LOOM TM Assembly Instructions FL3000 FL3006 FL3009 WOLF PUP WOLF PUP LT Find out more at schachtspindle.com Schacht Spindle Company 6101 Ben Place Boulder, CO 80301 p. 303.442.3212
More informationInstallation Instructions
Installation Instructions Walk-in Shower Screen with 180 o Return Panel (700 + 350mm & 900 + 350mm) Installation Instructions Parts supplied A B C D Wall Channel (x1) Wall fixing screw (x6) Return Straight
More informationMERRY GO ROUND ITEM NO: 8030
MERRY GO ROUND ITEM NO: 8030 OWNER S MANUAL CAUTION: This unit is designed to be used safely by up to 4 children between the ages of 3 years to 8 years old with a maximum weight of 00 pounds (45.4 kgs)
More informationTilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM
Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM Easy installation Built-in level for easy positioning Corrective leveling adjustments after installation Forward /
More informationOwner s Manual LSV1364
Owner s Manual LSV1364 1300 lb, 64" Beam Vertical Lift READ CAREFULLY - FAILURE TO FOLLOW INSTRUCTIONS AND SAFETY RULES MAY RESULT IN SERIOUS INJURY Manufacturers of Lakeshore Products 855 East Chicago
More informationETCHING PRESS MANUAL
ETCHING PRESS MANUAL FOR ALL SPEEDBALL ETCHING PRESSES Updated October 2018 TABLE OF CONTENTS Delivery Notes 3 Unpacking 4 Floor Stands 6 Safety Tips 6 Maintenance 7 Diagram 8 Warranty Card 9 2 This manual
More informationC L A S S I C. Deluxe. Snow Thrower Cab. Assembly and Care Instructions
C L A S S I C Deluxe Snow Thrower Cab Assembly and Care Instructions Deluxe Snow Thrower Cab Assembly and Care Instructions Before you begin please unpack the carton and check that you have all your parts.
More informationCOMPETITOR CB-610 STANDARD BENCH
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice COMPETITOR CB-610 STANDARD BENCH Hardware Identifier Assembly Instruction Exploded Diagram Parts List
More informationsouthpaw enterprises, inc.
southpaw enterprises, inc. Instruction Sheet C-STAND 7100 Store these instructions in a safe place or with the enclosed maintenance checklist Take time to familiarize yourself with the use and maintenance
More information125 Lb. Push Spreader
Operating Instructions and Parts Manual Please read and save these instructions. Read through this owner s manual carefully before using product. Protect yourself and others by observing all safety information,
More informationInstruction Manual. Manual Furniture Mover. Note: Owner/Operator must read and understand this instruction manual before using the furniture mover.
Instruction Manual Manual Furniture Mover Note: Owner/Operator must read and understand this instruction manual before using the furniture mover. I - Contents 1. Application 2 Specifications 3.Assembly
More informationWARM SHAKER / NORFOLK / LEXINGTON TV MEDIA STAND
SIMP II H O M E L I F E Y D E S I GN WARM SHAKER / NORFOLK / LEXINGTON TV MEDIA STAND 1/21 FOR REPLACEMENT PARTS OR HELP WITH ASSEMLY PLEASE CONTACT US AT: simpli-home.com/customer-support PLEASE ENSURE
More informationENIGMA AIR ENCLOSURE
ENIGMA AIR ENCLOSURE SHOWER ENCLOSURE INSTALLATION INSTRUCTION IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical
More informationSUMMERHOUSE PERGOLA ASSEMBLY INSTRUCTIONS. Toll-free: MODEL NO
SUMMERHOUSE PERGOLA MODEL NO. 088-1759-2 INSTRUCTIONS Toll-free: 1-888-670-6684 IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference.
More informationMM540 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MM50 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on PAGE.
More informationSpa & Hot Tub Necessities. Cover Removal System Installation & Use Manual
Spa & Hot Tub Necessities Cover Removal System Installation & Use Manual SET-UP AND ASSEMBLY BEFORE BEGINNING ASSEMBLY, CAREFULLY READ THE FOLLOWING INFORMATION AND INSTRUCTIONS: Place all parts in a cleared
More information9 Piece Counter Height Dining Set
9 Piece ounter Height Dining Set ITM. / ART. 2000706 Model # SAV9PH-N ASSEMLY INSTRUTIONS IMPORTANT, RETAIN FOR FUTURE REFERENE: READ AREFULLY If you have any questions regarding assembly or if parts are
More informationINSTRUCTION MANUAL LEG PRESS OPTION OF ELITE GYM
INSTRUCTION MANUAL LEG PRESS OPTION OF ELITE GYM QUESTION? As a quality home gym supplier we are committed to your complete satisfaction. If you have questions, or find missing or damaged parts, we will
More informationGearBoss II High Density storage
Assembly/Owner s Manual GearBoss II High Density storage contents Safety...........................................2 General......................................2 Installation...................................2
More informationsouthpaw enterprises, inc.
Eye Bolt Wrap 7001 Store these instructions with the enclosed maintenance checklist in a safe place. You may also access them on our website. this in an accessible location: the must be read and familiar
More informationOWNER S MANUAL. Sears Peyton 5PC Bar Set. * Balcony Chair. Product Code: D71 M80911 UPC Code: Date of Purchase: / /
OWNER S MANUAL Sears Peyton 5PC Bar Set * Balcony Chair Product Code: D71 M80911 UPC Code: 7-22938-07962-9 Date of Purchase: / / If you have any problems with this product, DO NOT RETURN IT TO THE STORE.
More informationInstallation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays
Installation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays Models: PLA60, PLA60-S, PLAV60, PLAV60-S Max UL Load Capacity: 175 lb (79 kg) 2300 White Oak Circle Aurora, Il 60502
More informationBRM * This item is for consumer use only and it is not meant for commercial use.
BRM 10 * This item is for consumer use only and it is not meant for commercial use. OWNER S MANUAL General Information Safety Before you undertake any exercise program, please be sure to consult with your
More informationInstallation Guide Philips MP40/50/60/70 Installation Kit for Penlon Anesthesia Machine
Installation Guide Philips MP40/50/60/70 Installation Kit for Penlon Anesthesia Machine The purpose of this guide is to describe installation of MP40/50/60/70 mounting equipment on the anesthesia machine.
More informationStop! Read This Important Information.
Stop! Read This Important Information. Stop, Do Not Proceed, Read This This door replacement kit is designed for the replacement of doors on a Supertop ONLY! This door will not work on any other style
More informationINSTALLATION INSTRUCTIONS JEEP SCRAMBLER FAST TRAC TOP PART #108-21X
INSTALLATION INSTRUCTIONS JEEP SCRAMBLER FAST TRAC TOP PART #108-21X Thank you for purchasing Specialty s Convertible Top for your Jeep vehicle. It has been designed for great fit and long wear. Please
More informationDOREL ASIA SLIM RECLINER NEED HELP! Model No: WM3451 UPC CODE: Lot number: Date of purchase:
DOREL ASIA SLIM RECLINER Model No: UPC CODE: 0-65857-16134-2 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot number: (TAKEN FROM CARTON)
More informationTITAN INDUSTRIAL RACK 6-FOOT TALL / 4-SHELF
TITAN INDUSTRIAL RACK 6-FOOT TALL / 4-SHELF DXST10000 IMPORTANT: Please read this manual carefully before assembling this storage rack and save it for reference INSTRUCTION MANUAL 3 TABLE OF CONTENTS
More informationINSTRUCTION SHEET STRUT DRIVER RETROFIT KIT PN: 22-79SDRF
INSTRUCTION SHEET STRUT DRIVER RETROFIT KIT PN: 22-79SDRF COMPONENTS: - Note: Each kit comes with one Strut Driver Gear Case Assembly, one Strut Driver Tube End Adapter Assembly, and a One-Time-Use Threadlocker
More informationCut-True 16M Manual Paper Cutter
Cut-True 16M Manual Paper Cutter 2/2013 OPERATOR MANUAL FIRST EDITION TABLE OF CONTENTS TOPIC PAGE Specifications 1 Safety Guidelines 1 Assembly 2 Overview 3 Description of Equipment Parts 3-4 Operation
More informationBACKSAVER VERSION 1.5 Hammer Drill Attachment
User Manual BACKSAVER VERSION 1.5 Hammer Drill Attachment Table of Contents Product Display..1 Instructions...2-7 Product Use..8 Disclaimer and Warranty.9 1 Attaching Backsaver Version 1.5 to Dewalt Hammer
More informationMPA-9000 Universal Ceiling Projector Mount Kit
I N S T R U C T I O N M A N U A L Universal Ceiling Projector Mount Kit The Universal Ceiling Projector Mount provides a unique, simplified method of ceiling mounting your inverted projector. This low
More informationHills Folding Frame Double and Single
Hills Folding Frame Double and Single Product Manual 2 Introduction Congratulations Congratulations on the purchase of your Hills Folding Frame Clothesline, which will bring you many years of trouble free
More informationReplacing the build plate clamps
Repair manual Replacing the build plate clamps Instructions The build plate clamps hold the glass plate in place on the heated bed. There are two fixed in place at the back of the heated bed and two at
More information