Accordion : Assembly Instructions
|
|
- Gordon Hampton
- 5 years ago
- Views:
Transcription
1 An accordion is a musical instrument which is played by compressing or expanding a bellows in a horizontal direction. When the central bellows are compressed and expanded, air flows to the instrument's reeds. Music can be made by simultaneously pressing the keys on the right hand side. Some accordions have buttons rather than keys. The right hand part is mainly responsible for creating the melody. The left hand side has buttons called bass buttons, which are used to create bass sounds or chords. This paper craft model is based on a piano accordion, with a keyboard on the right hand side. It is constructed so that the bellows can be slightly compressed and expanded. Move it and play with it, or just use it as an ornament! *This model was designed for Papercraft and may differ from the original in some respects. Parts sheet (Pattern) : Fourteen A4 sheets Assembly Instructions : Nine A4 sheets No. of Parts : 60 parts * Build the model by carefully reading the Assembly Instructions. Handy Hint Write down the number on the back of each part as you cut them out. Since many of the parts are complicated and very small, do a trial assembly before actually attaching them together. The finished piece will look more realistic if you paint the edges of the parts with colors similar to the parts. Assembly Instructions Tools and materials Assembly tip Caution Mountain fold(dotted line) Make a mountain fold. Valley fold (dashed and dotted line) Make a valley fold. Scissors line (solid line) Cut along the line. Cut in line (solid line) Cut a slot. Cut out (Pink area) Cut out the area marked. The glue spot(colored dot) shows where to apply the glue. Glue spot (Red dot) Attach the parts with the same part numbers. Glue spot (Green dot) Glue within the same part. Glue spot (Blue dot) Glue to the rear of the other part. Scissors, set square, glue (We recommend stick glue), pencil, used ballpoint pen, toothpicks, tweezers (useful for handling small parts) Before gluing, crease the paper along mountain fold and valley fold lines and make sure rounded sections are nice and stiff. Glue, scissors and other tools may be dangerous to young children so be sure to keep them out of the reach of young children. PAGE01
2 1 Assemble 2A and 3A, and glue them together. *Curve the parts marked with blue dotted circles before attaching. Be careful that the paper is not crooked when you attach it. 2 Assemble 3B. Make mountain and valley folds in turn on the entire piece. Fold the opposite way each end of the mountain folds. Flatten out the piece and make mountain folds on the parts marked valley folds on the parts marked mountain folds on the parts marked and fold in turn to create 90 angles. PAGE02
3 3 Accordion : Assembly Instructions Assemble 4A and 5A in the same way as 3B (fold up one edge only), and attach them to 3B. *When gluing, make sure that the pieces are fitted together right to the bottom, so that the corners are 90 when attached. Line up the areas to join together and glue to the reverse side of 5A. PAGE03
4 4 Assemble 6B, and attach it to 4A and 5A. 5 Assemble the 7A reinforcing parts and glue them, equally spaced, to the reverse side of 2A. Next, attach the assembled bellows to 2A. *When attaching the bellows to 2A, start by gluing the 6B glue tabs (marked ), being careful that the rest is not crooked. Glue the reverse sides together. Glue the reverse side of 6B here. (Same for the other side) For 6B, fold both sides inwards and glue their reverse sides together. PAGE04
5 6 Curve the parts marked with blue dotted circles. Next, glue together in order starting from. Accordion : Assembly Instructions 11B is a reinforcing part. Attach it to the back of the 11A area for dotted line. (Same for the other side) When gluing to 11A, attach this glue tab first and then the others, being careful that the pieces don't get crooked. Glue the reverse sides together. PAGE05 8A are reinforcing parts. Glue them, equally spaced, to the reverse side of 6A.
6 7 Glue 10C to the assembled 10B, glue all of the 9B parts (the black keys) and then attach the parts to 11A. 10C is a reinforcing part. Attach it to the back of the 10B area for dotted line. Mountain fold Valley fold *Make eighteen parts. Glue this part after attaching 10B. (Same for the other side) Glue the reverse sides together. PAGE06
7 8 Glue the assembled 9A to 10A, and attach it to the parts you assembled on page 6. *Gluing in turn starting from will result in a neater finish. PAGE07
8 9 Attach the parts you assembled on page 4 to the parts you assembled on page 7. Next, glue the remaining parts. Fold the glue tabs inwards, and attach together. When gluing 7G, bend it slightly as you attach. Slightly add curves to create the shape before attaching them together. Attach the reverse sides together. Fold 12A's glue tabs inwards and glue them together. *Make those two parts and attach glue them next to each other. Fold inwards and glue the reverse sides together. PAGE08
9 10 Make the stand and complete your accordion. Accordion : Assembly Instructions PAGE09
Trumpet : Assembly Instructions
A trumpet is a brass instrument which is played by blowing air into the mouthpiece and causing vibrations with the lips, while operating piston or rotary valves. A trumpet's shape and the length of its
More informationStatue of Liberty, U.S.A.: Assembly Instructions Canon is a registered trademark of Canon Inc. Canon Inc. Hiroshi Chiba / PAPERART-C
http://www.canon.com/c-park/en/ Before starting assembly:writing the number of each section on its back side before cutting out the sections is highly recommended. (* This way, you can be sure which section
More informationSydney Opera House (Australia): Assembly Instructions
http://www.canon.com/c-park/en/ Before starting assembly:writing the number of each section on its back side before cutting out the sections is highly recommended. (* This way, you can be sure which section
More information(Moving) Cute acrobat puppies : Assembly Instructions
Before starting assembly : Writing the number of each section on its back side before cutting out the sections is highly recommended. (* This way, you can be sure which section is which even after cutting
More informationArticulated Ladder Truck
Special Vehicle Series : 05 Articulated Ladder Truck View of completed model * This model was designed for Papercraft and may differ from the original in some respects. Tools tip Scissors Ruler, set square
More information(Moving) Clown and sea lion acrobatics : Assembly Instructions
http://www.canon.com/c-park/en/ Before starting assembly : Writing the number of each section on its back side before cutting out the sections is highly recommended. (* This way, you can be sure which
More informationSubaru Telescope: Assembly Instructions
http://www.canon.com/c-park/en/ Rules for assembling the Subaru Telescope Paper Craft Number each part on its backside after cutting out to avoid confusion. Indicates where sections should be glued together.
More information(Moving) Clowns out of a cannon : Assembly Instructions
http://www.canon.com/c-park/ Before starting assembly : Writing the number of each section on its back side before cutting out the sections is highly recommended. (* This way, you can be sure which section
More informationGrand piano : Assembly Instructions. Grand piano. [Assembly Instructions] : Eleven letter sheets. Scissors line. Cut in line.
Grand piano : Assembly Instructions PAGE 01 Lockbar Front lid Music desk Back lid Lock rail Bridge Strings Fallboard Frame Lid prop Heel Backbottom Leg Pedals Caster Grand piano [Assembly Instructions]
More informationTaj Mahal, India: Assembly Instructions
Taj Mahal, India: Assembly Instructions %&'(')*)+,)&)-./+,0.-.1)0-&1.2&-3)(4)%&'(')5'67)8)%&'(')5'67)8)9):)9)%(7;)?@@AAA76&'('76(2@6B>&-3@.'@ Before starting assembly:writing the number of each
More informationThe glue spot (colored dot) shows where to apply the glue. Glue parts with the same number together.
http://www.canon.com/c-park/en/ West face South face View of completed model Japan Himeji Castle Situated in Himeji City in Hyogo Prefecture, Himeji Castle is also known as the White Heron Castle because
More informationMini Roses : Assembly Instructions
is a registered trademark of Inc. Inc. Cut line Mountain fold Valley fold Slot http://www.canon.com/c-park/en/ Making the Rose Petals Glue the back of parts 5 to 14 and fold it outwards. Cut out the petals
More informationThoroughbred: Assembly Instructions
Thoroughbred: Assembly Instructions Parts list (pattern): Ten A4 sheets Assembly Instructions: Three A4 sheets *Read the Assembly Instructions carefully in page order referring to the page numbers on the
More informationJAGUAR XKR : Assembly Instructions
JAGUAR XKR : Assembly Instructions View of compleate model(side view) View of compleate model(front view) JAGUAR XKR The Jaguar XKR brings the Jaguar Sports Car tradition that began with the XK 120, into
More informationJAGUAR XKR : Assembly Instructions
View of compleate model(side view) View of compleate model(front view) JAGUAR XKR The Jaguar XKR brings the Jaguar Sports Car tradition that began with the XK 120, into the modern era. The sleek curves
More informationCrocodile : Assembly Instructions
Crocodile (Nile crocodile) Reptilia Crocodilia Crocodylidae Crocodylus Length: Up to 6 m Weight: Up to 1 t Habitat: Rivers, lakes, ponds and marshes in Africa *This photo shows a model which uses the optional
More informationPaper Toys The Easter Story Assembly Instructions
BIBLE Paper Toys The Easter Story Assembly Instructions TOOLS NEEDED Assembly Instructions Sharp scissors. Paper-cutting knife (recommended: X-Acto knife with a #11 blade). Sturdy tweezers with smooth
More informationWright Flyer. Glue. Parts list (Assembly Instructions) : Eleven A4 sheets (No.1 ~ No.11) No. of Parts: 127. Assembly Instructions
Wright Flyer The Wright Flyer is the aircraft built by the Wright brothers, Wilbur Wright and his younger brother Orville. The main wings were of biplane configuration, and it featured a gasoline engine
More informationTrebuchet Construction Instructions
Trebuchet Construction Instructions Follow these instructions step by step to create your trebuchet. Materials: Trebuchet Template (6 pages cardstock) Trebuchet Template (1 page paper) One unsharpened
More informationShake them and make music! "Shaky-shaky" maracas! : Assembly Instructions
*These maracas come in a set of two. Round maraca Thin maraca Maracas are percussion instruments that belong to the group of instruments called "idiophones." They consist of a hollow sphere with a handle
More informationElastic-powered Bus : Assembly Instructions
Elastic-powered Bus : Assembly Instructions Assembly Instructions 1. Carefully cut out the parts. 2. Fold along the dotted lines, making mountain or valley folds as indicated. 3. Attach the glue spots
More informationThe Hearse Carriage Assembly Instructions Page 1.
The Hearse Carriage Assembly Instructions Page 1. The Hearse Carriage Assembly Instructions Page 2. WHAT YOU'LL NEED: Scissors, Elmer's glue (or a glue stick), a needle, two toothpicks, a sharpened pencil,
More informationOp Art Pinwheel Side 1 Choices
Op Art Pinwheel Side 1 Choices 1. 1) Draw an X from corner to corner. Then draw a vertical line and horizontal line that match up in the center. 2) draw curved lines, spaced about 1/2" apart, between the
More informationJAGUAR E-TYPE : Assembly Instructions 1 Canon is a registered trademark of Canon Inc. M.Kajiwara
JAGUAR E-TYPE : Assembly Instructions 1 Canon is a registered trademark of Canon Inc. M.Kajiwara View of complete model (Side view) view of the engine view of the cockpit "Jaguar E-type" is one of the
More informationSnowy owl (Female) : Assembly Instructions
Snowy owl (Bubo scandiacus) The snowy owl is covered in snow-white feathers. This large species of owl is mainly found in Arctic tundra areas. The snowy owl can rotate its head up to 270 degrees giving
More informationBIBLE. Paper Toys. Book 2 The Nativity House. The Nativity Story
BIBLE Paper Toys The Nativity Story Book 2 The Nativity House Bible Paper Toys The Nativity Story You can read the story of the first Christmas in Matthew 1:18 25, 2:1 11 and Luke 1:26 38, 2:1 20. Model
More informationNote. One - point Advice. To begin. Basic working method and markings. Fold along these lines. The printed surface should be
Note To begin Basic working method and markings Tools and materials needed -Ruler - scissors - blade cutter or "Exacto-knife" - awl or other pointed tool (for making a folding crease) - felt pen - pin
More informationSci-fi MiniWorld 10 + EASY TO BUILD PAPER CRAFT ROBOTS. Cut, assemble and play
Sci-fi MiniWorld 10 + EASY TO BUILD PAPER CRAFT ROBOTS Cut, assemble and play TOOLS NEEDED glue General Assembly Instructions Sharp scissors. Paper-cutting knife (recommended: X-Acto knife with a #11 blade).
More informationPaper Toys Town Accessories
BIBLE Paper Toys Town Accessories TOOLS NEEDED glue General Assembly Instructions Sharp scissors. Paper-ting knife (recommended: X-Acto knife with a #11 blade). Sturdy tweezers with smooth edges. (Tweezers
More informationAssembly Instructions
Assembly Instructions Thank you for downloading this special New Year s paper craft model. By following these instructions while referring to the names and numbers shown on the parts sheet, you can complete
More informationMURATA BOY Paper Craft
MURATA BOY Paper Craft Assembly Direction Download the paper craft data and print it out to assemble MURATA BOY. Complete the paper craft using all of the parts printed. It will make a nice family project.
More informationEnterprise 1701D STNG
Enterprise 1701D STNG General notes: Print the model page on 'card stock' which is the thickness of those subscription and cards inserted in magazines. An office supply store has it labeled as 65lb. The
More informationRead This Before Printing Anything!
Read This Before Printing Anything! coca-cola polar bears papercraft 2 guidelines Printing When printing with Adobe Reader, it is important to use proper print settings 1 for correct alignment and scaling.
More informationTheSorceres. (FantasyVersion)
TheSorceres (FantasyVersion) The Sorceress! (Fantasy Version) Papercraft design by Kostas Ntanos Based on the Sorceress from The Cardboard Kingdom What you will need o An adult to help you with cutting
More informationTHE FLOATING CANDELABRA ASSEMBLY INSTRUCTIONS page 1.
THE FLOATING CANDELABRA ASSEMBLY INSTRUCTIONS page 1. THE FLOATING CANDELABRA ASSEMBLY INSTRUCTIONS page 2. WHAT YOU'LL NEED: Scissors, Elmer's glue (or a glue stick), a toothpick, a ruler, a needle and
More informationTHE PHANTOM SEMI Assembly Instructions Page 1.
THE PHANTOM SEMI Assembly Instructions Page 1. (Continued on next page...) THE PHANTOM SEMI Assembly Instructions Page 2. (Continued on next page...) THE PHANTOM SEMI Assembly Instructions Page 3. WHAT
More informationAssemble the head. Wedding Bear Bride : Assembly Instructions A1, B1. Use pattern: Page2/Page3.
A Assemble the head Use pattern: 2/3. Cut out by cutting along the lines. Cut along the line marked. Cut a slot right Glue down the glue in to the apex of Glue spot tabs one at a time the triangular in
More informationPlay Scale Doll Accessories Products hfd008a, hfd008b, hfd008c, and hfd008d Designed by Ann Lenore Vanture
Play Scale Doll Accessories Products hfd008a, hfd008b, hfd008c, and hfd008d Designed by Ann Lenore Vanture For the best results please view the on-line Tool Box found on the same menu page as this tutorial.
More informationAssembly Instructions for the Link Trainer
Assembly Instructions for the Link Trainer Edwin Link and his trainer: a brief history The Link Trainer holds a significant place in aviation history. It was the first true flight simulator, providing
More informationAssembly instructions: Six A4-sized sheets. Paper craft: Three A4-sized sheets with 14 parts in all
Thank you for downloading this paper craft model of the African elephant. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare
More informationAssembly instructions: Nine A4-sized sheets. Paper craft: Two A4-sized sheets with 9 parts in all
Thank you for downloading this paper craft model of the Yellow-eyed penguin. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare
More informationAssembly Instructions
Assembly Instructions Thank you for downloading this paper craft model of the. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model. Assembly
More informationAssembly instructions: Nine A4-sized sheets. Paper craft: Four A4-sized sheets with 21 parts in all
Thank you for downloading this paper craft model of the Japanese Macaque. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare
More informationKung Fu Panda 3-D Paper Character Po ASSEMBLY INSTRUCTIONS Time to Complete: Approximately 60 minutes Level: Difficult GETTING STARTED
Kung Fu Panda 3-D Paper Character Po ASSEMBLY INSTRUCTIONS Time to Complete: Approximately 60 minutes Level: Difficult GETTING STARTED Materials: Metal-edged ruler Butter knife Scissors or X-ACTO knife
More information3Position the hull of the ship as
Yamato: Step-by-step 25 The hull and stern deck c b d a b d c e e f a Rear frame b Stern deck x 2 c Stern deck x 2 d Side wall x 2 Wood glue Sandpaper (no. 400 grain) Craft knife Pliers d Side wall x 2
More informationAssembly Instructions
Assembly Instructions Thank you for downloading this paper craft model of the Plum blossoms and a Japanese bush warbler. By matching the names and numbered parts in the instructions, you and your family
More informationAssembly Instructions
Assembly Instructions Thank you for downloading the "YZF-R"paper craft model. By simply following this manual while referring to the names and numbers shown on the parts sheets, you can assemble an authentic-looking
More informationAssembly instructions: Nine A4-sized sheets. Paper craft: Three A4-sized sheets with 13 parts in all
Thank you for downloading this paper craft model of the Cape Penguin. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare and
More informationHubble Space Telescope Paper Model Directions Downloads, patterns, and other information at:
Hubble Space Telescope Paper Model Directions Downloads, patterns, and other information at: www.hubblesite.org/go/model Materials: model pattern printed onto cardstock/coverstock instructions printed
More informationFryer's Trebuchet Paper Kits
Fryer's Trebuchet Paper Kits Things you will need 7 sheets of card approx. 0.3 mm or 0.01 inches thick 1 sheet of paper to print out to download. 2 x 6-7 mm dowel or pencils 1 paper clip String 6 cms (2.5
More informationAssembly instructions: Six A4-sized sheets. Paper craft: Three A4-sized sheets with 9 parts in all
Thank you for downloading this paper craft model of the Coelacanth. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare and precious
More informationc Fold the two outer flaps inside and then fold in half so it so it looks like this. While it is folded cut along the red lines to create a notch.
Building the Paper Dice Tower Tools Needed: A pen, pencil, or bone folder for scoring the paper (this will make folding easier). Paper (heavy card stock preferred). Scissors, a razor knife, and straight
More informationAssembly instructions: Seven A4-sized sheets. Paper craft: Three A4-sized sheets with 9 parts in all
Thank you for downloading this paper craft model of the Gorilla. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare and beautiful
More informationPocket Album. Supplies Needed: CS Bookbinding Glue CS Grid Ruler Bone Folder Foam Brush Pencil Scissors
Pocket Album Kit Ingredients: (2) 5.25x7.25 Book Board (2) 6.5x8.5 Cover Papers (2) 4-7/8x7-1/8 Inside Covers 7x11.5 Spine (7) Die Cut and Scored Inside Pages (7) 5.5x7 Translucent Inside Pages 1 Yard
More informationSnowman Gift Box Tower Designed By: Amanda Corbet December 2011
Snowman Gift Box Tower Designed By: Amanda Corbet December 2011 This adorable snowman gift box tower is the perfect way to shower someone special with gifts. Finished as shown this box is over 16 inches
More informationThe Bleak Estate Assembly Instructions - Page 1.
The Bleak Estate Assembly Instructions - Page 1. The Bleak Estate Assembly Instructions - Page 2. The Bleak Estate Assembly Instructions - Page 3. WHAT YOU'LL NEED: Scissors, glue (or a glue stick), a
More informationSky Eagle. User Guide. Cautionary and Warning Statements
Sky Eagle User Guide 60089 V0613 Cautionary and Warning Statements This kit is designed and intended for educational purposes only. Use only under the direct supervision of an adult who has read and understood
More informationSee pages 5-6 for template and instructions. Gear up with this never land pirate hat and let the swashbuckling begin!
Treasure crafts Ahoy ye pirates! Here be some super fun pirate crafts for you and your crew! Make all these piratey crafts by printing the pages of this Treasure Crafts kit. You will need: Scissors» Tape»
More informationLearn to Fold. Origami Animals
Learn to Fold Origami Animals Table of Contents Introduction... 2 Fish... 4 Hopping Frog... 9 Snake... 12 Tiger... 14 Frog... 18 Flapping Bird... 25 Elephant... 28 Dog... 36 Crane... 38 Cow... 40 Cat...
More informationTHE TITANO EMPEROR V ACCORDION
Cover Page THE TITANO EMPEROR V ACCORDION The bass buttons of the TITANO EMPEROR V ACCORDION have a range extending ONE OCTAVE BELOW and ONE OCTAVE ABOVE that of the standard 120 bass accordion. The instrument
More informationMylar Moon Boots. Supplies. Cardboard. Mylar blanket. Duct tape. Craft knife. Ruler. Pen/Pencil
Mylar Moon Boots 1. Design a custom box. Measure the length, width, and height of your foot and add an inch to each of these measurements.» Now draw a rectangle on your cardboard that has the new dimensions
More informationAssembly instructions: Seven A4-sized sheets. Paper craft: Three A4-sized sheets with 15 parts in all
Thank you for downloading this paper craft model of the Little Spotted Kiwi. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare
More informationAssembly instructions: Ten A4-sized sheets. Paper craft: Three A4-sized sheets with 22 parts in all
Thank you for downloading this paper craft model of the Japanese Crane. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare and
More informationDARC MANSION ASSEMBLY INSTRUCTIONS page 1.
DARC MANSION ASSEMBLY INSTRUCTIONS page 1. DARC MANSION ASSEMBLY INSTRUCTIONS page 2. NOTE: This project should be printed on heavy card stock. WHAT YOU'LL NEED: Scissors, Elmer's glue (or a glue stick),
More informationMake Your Own White House Pop-Up. Glue Here. Glue Here. Glue Here. Glue Here. Card Base
Make Your Own White House Pop-Up F G H I Card Base Make Your Own White House Pop-Up Piece #1 (front of building) E Piece #2 (roof) D C B fold around to back and glue A CUT AT TOP OF COLUMN TO CUT OUT THIS
More informationMANEKI NEKO (Lucky cat)
Paper craft Mini-book / Assembly Instructions MANEKI NEKO (Lucky cat) Beckoning for money Maneki-neko, or beckoning cat, is a widely recognizable figure beloved in Japan as a lucky cat that beckons for
More informationAssembly instructions: Nine A4-sized sheets. Paper craft: Three A4-sized sheets with 13 parts in all
Thank you for downloading this paper craft model of the SUMATRAN ORANG- UTAN. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this
More informationandy Cane Pop-Up Card
andy Cane Pop-Up Card Project created by Jo-Ann Fabric and Craft Stores SUPPLIES & TOOLS: Cardstock: white, green, light red 12"x12" Paper, cream holly print Glitter alphabet stickers, black Self-adhesive
More informationFun with Art. May lesson Plan for Fourth Grade. Origami
Fun with Art May lesson Plan for Fourth Grade Origami Biographical information Origami: from ori meaning "folding", and kami meaning "paper" is the traditional Japenese Folk Art of paper folding, which
More informationPILOT SEAT AND HARNESS
1. Locate the following parts PILOT SEAT AND HARNESS #84 threading needle, 1 each #88 lacing cord, 1 each #119 aluminum seat, 1 each #120 plywood, pilot seat bottom, 1 each #121 wood screw, 3 each #293
More informationDO-IT-YOURSELF DISNEY-INSPIRED GIFT WRAP DISNEY
DO-IT-YOURSELF DISNEY-INSPIRED GIFT WRAP YOU WILL NEED*: Printed templates Scissors Tape Glue Craft paper Various ribbon *Additional supplies may be needed for each version and are listed before Step 1.
More informationILLUSION CONFUSION! - MEASURING LINES -
ILLUSION CONFUSION! - MEASURING LINES - WHAT TO DO: 1. Look at the line drawings below. 2. Without using a ruler, which long upright or vertical line looks the longest or do they look the same length?
More informationAssembly instructions: Seven A4-sized sheets. Paper craft: Three A4-sized sheets with 15 parts in all
Thank you for downloading this paper craft model of the California Condor. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare
More informationAssembly instructions: Seven A4-sized sheets. Paper craft: Three A4-sized sheets with 13 parts in all
Thank you for downloading this paper craft model of the Grevy's zebra. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare and
More informationOrigami Nigger Mouth
Origami Nigger Mouth Here is a great, eye-catching origami-style promotional prop that you can make yourself and leave out around for niggers and other prospective human niggermaniacs to enjoy. Make a
More informationHow to Draw a Rose Flower
How to Draw a Rose Flower Easy Fast Have you ever wanted to be able to draw a beautiful rose? This easy step-by-step drawing tutorial outlines the steps necessary to draw a cartoon style rose, complete
More informationVENETIAN BLIND STRUCTURE INSTRUCTIONS 110
108 Venetian Blind VENETIAN BLIND STRUCTURE INSTRUCTIONS 110 Cut on all of the solid lines Do nothing on the placeholder lines. Use glue on all TABS. Score and fold on all of the dashed lines. Use glue
More informationHubble Space Telescope Expert Model Interior Directions Downloads, patterns, and other information at:
Hubble Space Telescope Expert Model Interior Directions Downloads, patterns, and other information at: Materials: Construction tips: The patterns and instructions, which can be downloaded at. The pattern
More informationHow to make a... Let it Snow Box Card~ Part 1. Shopping List:-
How to make a... Let it Snow Box Card~ Part 1 Shopping List:- Grand Calibur Die Cutting Machine : WIZCAL Spellbinders All in One Tool : WIZTOOL Sue Wilson `LET IT SNOW` Die Festive Collection : CED3004
More informationBOBS CARD MODELS. De Haviland Dash-8 water-bomber (1:72)
BOBS CARD MODELS www.bobscardmodels.com De Haviland Dash-8 water-bomber (1:72) A Canada de Haviland Dash-8 fitted with a large water tank, complements the French aerial firefighters' fleet of Canadairs
More informationActivity Instructions - Classroom Wind Farm
Wind Power - Classroom Wind Farm Activity Instructions - Classroom Wind Farm The purpose of this activity is for students to build their own windmill generator, which will then be one unit of the classroom
More informationEasy Twist Pop-Up Panel Card
Easy Twist Pop-Up Panel Card These cards are very popular, and the instructions online vary greatly. Some are just way to complicated. This is the easiest way I ve found to make it. I hope it helps you.
More informationa free sewing pattern by
a free sewing pattern by 2 kitty wallet This project is a fun companion piece to my Kitty Purse pattern. It's a bi-fold wallet with the traditional slots for cards (6) and one for receipts or bills. A
More informationwww.craftsforkids.com 1402-2 Keep In Touch Cards for all Occasions: Mother s Day, Father s Day, Lucky Days and Summer Days Always cover your work surface with a mat or some type of protective covering
More informationInventor s House (Alternate Version)
Inventor s House (Alternate Version) Detailed Building Instructions Model Designed by Dave Graffam Model Built and Instructions Provided by Jerry Jensen For more of Dave s Models please visit www.davesgames.net
More informationBob's Card Model
Bob's Card Model www.bobscardmodels Conair C S 2F (Tracker) water-bomber(1:72) Securité Civile's converted Tracker, used for patrol duty, but also for water-bombing (3200 litres). Together with the Canadairs
More informationFollow the numbered instructions that correspond to an illustration below:
Folded Christmas Star Materials needed: Colored or white paper X-acto knife and cutting mat or scissors Ruler Patience and practice :) Instructions Follow the numbered instructions that correspond to an
More informationShopping List:- How to make a... Sue Wilson Magical Butterfly Card. Sue Wilson Spanish Collection Granada Die & Galicia Die,
How to make a... Sue Wilson Magical Butterfly Card Shopping List:- Sue Wilson Spanish Collection Granada Die & Galicia Die, Sue Wilson Finishing Touches Filigree 3D Itty Bitty Bows & Magical Butterflies
More informationMake Your Home the Heart of Thanksgiving
FOR FUN Make Your Home the Heart of Thanksgiving A few simple decorations can bring the Thanksgiving feeling into your home and help you get into the Holiday spirit. We've put together some easy-to-do
More informationActivity Instructions
One Cut Activity Instructions There are several different ways to make stars using the one cut method and two are included in this activity: one set of instructions is included in this document and the
More informationSaucer. Tea Party Hat
Tea Party Crafts Serving Bowl Teacups Saucer Saucer Sugar Cubes Tea Party Hat Tea Party Hat Teacups What you'll need White plastic cups Wa shi tape (½-in.-wide or ⅝-in.-wide tape works best) Printouts
More informationAssembly instructions: Seven A4-sized sheets. Paper craft: Three A4-sized sheets with 16 parts in all
Thank you for downloading this paper craft model of the Steller s Sea Eagle. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this rare
More informationMakes Sense SCIENCE GRADE LEVEL KINDERGARTEN FIRST MATERIALS
MATERIALS FOR STUDENT: (one per student unless otherwise noted) FloraCraft Make It: Fun Foam Ball, 4" diameter Jar band (from a canning jar lid) (optional) Cardstock paper features (See FOR TEACHER below)
More informationMy Body. How many? Look and count. seven. Ediciones SM
My Body Ediciones SM How many? Look and count. seven 7 Let s Sing! Let s All Learn to Count Let s all learn to count. Let s count the right amount. 1 and 2 and 3 and 4, 5 and 6 and 7 and 8, 9 and 10 and
More informationlay it on me sketch layouts
scrapbook s lay it on me sketch layouts featured products/ Chatterbox Happy Garden papers Scenic Route Loveland papers Crate Paper Sweet Branch papers BasicGrey painted brads Crate Paper brads and rub-ons
More informationRock Around the Clock
Rock Around the Clock 2018 Thread Loft Fabric Requirements Rock Around the Clock Fabric Yardage Background 118 1/2" x 18 1/2" Pink (Pigs) 3" x 6" Yellow 6" x 6" Black 9" x 10" Pink Polka Dot (Wings) 3
More informationCardboard Model Buildings
Cardboard Model Buildings Get more model kits from http://www.modelbuildings.org PRINTING & ASSEMBLY TIPS: These OO designs can easily be resized by reducing the print percentage as follows: OO scale is
More informationVol.3 Yellow Footed Tortoise
Vol. Yellow Footed Tortoise Thank you for downloading this paper craft model of the Yellow Footed Tortoise. By matching the names and numbered parts in the instructions, you and your family can complete
More informationMountain Girl Bracelet
Mountain Girl Bracelet by Regina Payne Supply List: 1 50-65mm Marquise Stone 2 12-16mm Cabochons or buttons 2 10-14mm Cabochons or buttons 6-8 DiscDuo beads 12 16 Tila Beads 26 32 Half Tila Beads 10 inches
More informationBob's Card Models and [Resources]
Bob's Card Models www.bobscardmodels.altervista.org and www.zealot.com [Resources] Short 330-200 (Scale 1:72) The Short 330-200 is a short haul airlcraft produced by Short Brothers in the UK. The aircraft
More information