LCR Meters. option. option. Measurement. signal level. Measurement. Accessories

Transcription

1 1MHz to 00MHz Frequency at High Speed with Superior Repeatability IMPEDANCE ANALYZER IM7580 mode parameter 1 MHz to 00 MHz teting ource frequency Fatet tet peed of 0.5 mec ±0.72% rdg. baic accuracy Compact, half-rack footprint with pace-aving tet head Comprehenive contact check (via DCR teting, Hi-Z reject or waveform judgment) Make frequency weep, level weep and time interval meaurement in Analyzer Mode IM7580 IM (connection cable 1 m i bundled) (connection cable 2 m i bundled) The intrument doe not hip with a tet fixture or probe. A tet fixture deigned pecifically for ue with the Impedance Analyzer IM7580 i required. Z, Y, θ, R (ESR), Rp, X, G, B, C, Cp, L, Lp, D (tanδ), Q Meaurable range 100 mω to 5 kω Z: 0.00 m to GΩ / R, Rp, X: ± (0.00 m to GΩ) L, Lp: ± ( n to GH) / Q: ± (0.00 to ) θ: ± (0.000 to ), C, Cp: ± ( p to GF) range D: ± ( to ), Y: (0.000 n to GS) G, B: ± (0.000 n to GS), Δ%: ± (0.000 % to %) frequency LCR mode, Analyzer mode (Sweep with meaurement frequency and meaurement level), Continuou meaurement mode Z: ±0.72 % rdg. θ: ± MHz to 00 MHz (100 Hz to 10 khz tep) Power: dbm to +7.0 dbm Voltage: 4 mv to 1001 mv Current: 0.09 ma to ma Uer-configured power, voltage, and current Output impedance 50 Ω (at 10 MHz) 8.4-inch color TFT with touch creen FAST: 0.5 m / MED: 0.9 m / SLOW: 2.1 m / SLOW2:.7 m *1 Analog meaurement time peed *1 Contact check, Comparator, BIN meaurement (claification), Panel loading/aving, Memory function, Equivalent circuit analyi, Correlation compenation Handler, USB, LAN, GP-IB (al), RS-22C (al) 100 to 240 V AC, 50/60 Hz, 70 VA max. Main unit: 215 mm (8.46 in) W 200 mm (7.87 in) H 268 mm (10.55 in) D, 6.5 kg (229. oz) Dimenion and ma Tet head: 61 mm (2.40 in) W 55 mm (2.17 in) H 24 mm (0.94 in) D, 175 g (6.2 oz) Tet head 1, Connection cable 1, Power cord 1, Intruction manual 1, LCR application dic (Communication uer manual) 1 Available oon TEST FIXTURE STAND IM9200 ADAPTER(.5mm/7mm) IM9906 SMD TEST FIXTURE IM9201 GP-IB INTERFACE Z000 Panel ave and continuou meaurement When one component mut be meaured two different way For the PC, 9pin - 9pin, cro, 1.8m (5.91 ft) length *Pleae ee the individual product catalog for more information Application with the IM Common-mode filter meaurement When one component mut be meaured two different way or when compenation value and meaurement condition differ for each meaurement point, the IM7580 treamline the meaurement proce by automatically witching among compenation value and meaurement condition. RS-22C RS-22C CABLE 967 INTERFACE Z001 When compenation value and meaurement condition differ for each meaurement point Progreive witching of compenation value and meaurement condition Common mode Automatic witching Differential mode Halve cycle time by uing two intrument Thank to a compact deign, two IM7580 can be tored in one rack. Uing two impedance analyzer imultaneouly can dramatically reduce cycle time. Application with the IM PASS/FAIL judgment for power inductor Comparator function By uing the comparator function area and peak judgment function, you can eaily differentiate between defective and non-defective component. Set the judgment area and then check whether component meaurement reult fall inide that area. Thi approach i well uited to differentiating between defective and non-defective component. Non-defective: IN Area judgment 4 Defective: NG A illutrated to the left, you can et a range around the peak value and ue it to make judgment. *Pleae ee the individual product catalog for more information

2 Meaure Electrochemical Component and Material, Batterie, and EDLC* (*Electric double-layer capacitor) CHEMICAL IMPEDANCE ANALYZER IM590 Broad 1 mhz to 200 khz ignal ource range upport meaurement of ion behavior and olution reitance Continuou meauring and high-peed teting of LCR and weep meaurement with a ingle intrument Meaure internal impedance of batterie with no load Perform high-peed weep meaurement in a little a 2 m of ±0.05% i ideal for application from component teting to R&D Meaure LCR impedance for Cole-Cole plot and equivalent-circuit analye of electrochemical component and material LCR mode, Continuou meaurement mode (LCR mode / Analyzer mode), Analyzer mode (Sweep with meaurement frequency and meaurement level, mode temperature characteritic, equivalent circuit analyi) Z, Y, θ, R (ESR), Rp, Rdc (DC reitance), X, G, B, C, Cp, L, Lp, D (tanδ), Q, T, σ (conductivity), ε (dielectric contant) parameter range 100 mω to 100 MΩ, 10 range (All parameter are determined according to Z) Z, Y, R, Rp, Rdc, X, G, B, L, Lp, C, Cp, σ, ε : ±( [unit] to G [unit], Abolute value diplay for Z and Y only range frequency Output impedance time IM590 Thi product i not upplied with meaurement probe or tet fixture. Pleae elect and purchae the meaurement probe or tet fixture appropriate for your application eparately. For an RS-22C connection: A croover cable for interconnection can be ued. You can ue the RS-22C Cable 967 without hardware flow control. Dimenion and ma θ : ±(0.000 to ), D : ±( to ) Q : ±(0.00 to ), Δ % : ±(0.0000% to %) T : C to 99.9 C σ, ε :±( [unit] to G [unit] Z: ±0.05% rdg. θ: ±0.0 1 mhz to 200 khz (1 mhz to 10 Hz tep) Normal mode: V mode/cv mode: 5 mv to 5 Vrm, 1 mvrm tep CC mode: 10 μa to 50 marm, 10 μarm tep Low impedance high accuracy mode: V mode/cv mode: 5 mv to 2.5 Vrm, 1 mvrm tep CC mode:10 μa to 100 marm, 10 μarm tep Normal mode: 100 Ω, Low impedance high accuracy mode: 25 Ω 5.7-inch color TFT, diplay can be et to ON/OFF 2 m (1 khz, FAST, diplay OFF, repreentative value) DC bia meaurement, DC reitance temperature compenation (converted reference temperature i diplayed), Temperature meaurement, Battery meurement (Automatic DC biaing ytem), Comparator, BIN meaurement (claification), Panel loading/aving, Memory function EXT I/O (Handler), USB communication (high-peed), USB memory Optional: Chooe 1 from RS-22C, GP-IB, or LAN 100 to 240 V AC, 50/60 Hz, 50 VA max. 0 mm (12.99 in) W 119 mm (4.69 in) H 168 mm (6.61 in) D,.1 kg (109. oz) Power cord 1, Intruction manual 1, CD-R (Communication intruction manual and ample oftware [Communication control, accuracy calculation, and creen capture functionality] ) 1 Shared for IM590, IM5, IM52 meauring SMD with electrode on the bottom, DC to 8 MHz, Meaurable ample ize: to 0402 (EIA), 0402 to 1005 (JIS) Cable length 1 m (.28 ft), DC to 8 meaurable conductor diameter: ø0. Cable length 7 cm (28.74 ft), DC to 8 tip electrode pacing: 0. (0.01 in) to *Pleae ee the individual product catalog for more information the L2001, regular ize, the L2001, mall ize 4-TERMINAL PROBE TEST FIXTURE Cable length 1 m (.28 ft), DC to 200 khz, 50 Ω, meaurable conductor diameter: φ0. mm Cable length 1 m (.28 ft), DC to 8 meaurable conductor diameter: ø0. (0.01 in) to 1.5 mm (0.06 in) DC to 8 MHz, meaurable conductor diameter: ø0. (0.01 in) to 2 mm (0.08 in) When uing the or , external contantvoltage and contant-current ource are required. SMD TEST FIXTURE 926 DC to 8 MHz, Tet ample dimenion:1 mm (0.04 in) to 10 mm (0.9 in) 4-TERMINAL PROBE SMD TEST FIXTURE 9677 Cable length 1 m (.28 ft), DC to 200 khz, impedance characteritic of 50 Ω, meaurable conductor diameter: φ0. mm (0.01 in) to 2 mm (0.08 in) meauring SMD with electrode on the ide; DC to 120 MHz, tet ample dimenion:.5 mm ±0.5 mm (0.14 in ±0.02 in) SMD with electrode on the bottom; DC to 120 MHz, tet ample dimenion: 1.0 DC BIAS VOLTAGE UNIT Hz to 8 MHz, maximum applied voltage of DC ±40 V DC BIAS CURRENT UNIT Hz to 2 MHz, maximum applied current of DC 2 A Temperature probe SMD TEST FIXTURE IM TERMINAL PROBE L2000 SHEATH TYPE TEMPERATURE PROBE 9478 Pt100, Tip dia. φ2. mm (0.09 in), Cord length 1 m (.28 ft), Waterproof contruction *Ue with only for the IM590, IM5 GP-IB INTERFACE Z000 RS-22C LAN INTERFACE INTERFACE Z001 Z002 5

3 Single Device Solution for High Speed Teting and Frequency Sweeping IMPEDANCE ANALYZER IM570 mode parameter range range LCR meaurement, DCR meaurement, weep meaurement, continuou meaurement and high-peed teting achieved with one intrument High-peed teting, achieving maximum peed of 1.5m (1 khz) and 0.5m (100kHz) in LCR mode High-accuracy meaurement, baic accuracy of Z parameter: ± 0.08% Perfect impedance analyzer for teting the reonance characteritic of piezoelectric element, C-D and low ESR meaurement of functional polymer capacitor, DCR and L-Q meaurement of inductor (coil and tranformer) Perform frequency weep, level weep, and time interval meaurement in analyzer mode IM570 Thi product i not upplied with meaurement probe or tet fixture. Pleae elect and purchae the meaurement probe or tet fixture appropriate for your application eparately. For an RS-22C connection: A croover cable for interconnection can be ued. You can ue the RS-22C CABLE 967 without hardware flow control. Cable length 7 cm (28.74 ft), DC to 4-TERMINAL PROBE TEST FIXTURE Cable length 1 m (.28 ft), DC 8 to 200 khz, 50 Ω, meaurable the L2001, regular ize, the L2001, mall ize conductor diameter: φ0. mm meaurable conductor diameter: ø0. tip electrode pacing: 0. (0.01 in) to Cable length 1 m (.28 ft), DC to 8 meaurable conductor diameter: ø0. (0.01 in) to 1.5 mm (0.06 in) DC to 8 MHz, meaurable conductor diameter: ø0. (0.01 in) to 2 mm (0.08 in) Cable length 1 m (.28 ft), DC to 8 4-TERMINAL PROBE L2000 For meauring SMD with electrode on the bottom, DC to 8 MHz, Meaurable ample ize: to 0402 (EIA), 0402 to 1005 (JIS) ±( [unit] to G [unit], Abolute value diplay for Z and Y only θ : ±(0.000 to ), D : ±( to ) Q : ±(0.00 to ), Δ % : ±(0.0000% to %) Z ±0.08% rdg. θ: ±0.05 frequency 4 Hz to 5 MHz (10 mhz to 100 Hz tep) Normal mode: V mode/cv mode: 5 mv to 5 Vrm (up to 1 MHz) 10 mv to 1 Vrm ( MHz to 5 MHz), 1 mvrm tep CC mode: 10 μa to 50 marm (up to 1 MHz) 10 μa to 10 marm ( MHz to 5 MHz), 10 μarm tep Low impedance high accuracy mode: V mode/cv mode: 5 mv to 1 Vrm (up to 100 khz), 1 mvrm tep CC mode:10 μa to 100 marm (100 mω and 1Ω range of up to 100 khz), 10 μarm tep Output impedance Normal mode: 100 Ω, Low impedance high accuracy mode: 10 Ω 5.7-inch color TFT, diplay can be et to ON/OFF time 0.5 m (100 khz, FAST, diplay OFF, repreentative value) DC bia meaurement, Comparator, BIN meaurement (claification), Panel loading/aving, Memory function EXT I/O (handler), RS-22C, GP-IB, USB communication, USB memory, LAN 90 to 264 V AC, 50/60 Hz, 150 VA max. Dimenion and ma 0 mm (12.99 in) W 119 mm (4.69 in) H 07 mm (12.09 in) D, 5.8 kg (204.6 oz) Power cord 1, Intruction manual 1, intruction manual (CD-R) 1 GP-IB CONNECTOR When uing the or , external contantvoltage and contant-current ource are required. SMD TEST FIXTURE TERMINAL PROBE SMD TEST FIXTURE 9677 DC to 8 Cable length 1 m (.28 ft), MHz, Tet ample dimenion:1 DC to 200 khz, impedance meauring SMD with electrode on mm (0.04 in) to 10 mm (0.9 in) characteritic of 50 Ω, meaurable the ide; DC to 120 MHz, tet ample conductor diameter: φ0. mm (0.01 dimenion:.5 mm ±0.5 mm (0.14 in ±0.02 in) in) to 2 mm (0.08 in) SMD with electrode on the bottom; DC to 120 MHz, tet ample dimenion: 1.0 mm (0.04 in) to 4.0 mm (0.16 in) wide, max. 1.5 mm (0.06 in) high DC BIAS VOLTAGE DC BIAS CURRENT UNIT UNIT Direct connection type, 40 Hz to 8 MHz, maximum applied voltage of DC ±40 V Direct connection type, 40 Hz to 2 MHz, maximum applied current of DC 2 A Factory-intalled SMD TEST FIXTURE IM9100 LCR mode, Analyzer mode (Sweep with meaurement frequency and meaurement level), Continuou meaurement mode Z, Y, θ, R (ESR), Rp, Rdc (DC reitance), X, G, B, C, Cp, L, Lp, D (tanδ), Q 100 mω to 100 MΩ, 12 range (All parameter are determined according to Z) Z, Y, R, Rp, Rdc, X, G, B, L, Lp, C, Cp : Note: Cutomer who have purchaed the Impedance Analyzer IM570 can add the Equivalent Circuit Analyi Firmware IM9000 function. Pleae contact your local HIOKI repreentative. EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000 For the IM570 (Factory-intalled ) Simple Circuit Analyi & Detailed Acceptance/Rejection Deciion-Making EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000 Baic pecification Three-element model Equivalent circuit model: Four model for Coil, Reitance, Capacitor item: L1 (Inductance), C1 (Capacitance), R1 (Reitance), Qm (Reonance harpne), fr (Reonance frequency) / fa (Anti-reonance frequency) Four-element model Equivalent crcuit model: One model for Piezoelectric element item: L1 (Inductance), C1 (Capacitance), R1 (Reitance), C0 (Parallel capacitance), Qm (Reonance harpne or mechanical quality coefficient) fr (Reonance frequency), fa (Anti-reonance frequency), f (Serie reonance frequency), fp (Parallel reonance frequency), fm (Maximum admittance frequency), fn (Minimum admittance frequency), f1 (Maximum uceptance frequency), f2 (Minimum uceptance frequency) Other function The IM9000 can automatically elect the equivalent circuit model from the five typical model to minimize the difference between the meaured value and the ideal frequency characteritic derived from the analyi reult An acceptance/rejection deciion can be made for the L, C, and R element compriing a part and the reonance harpne (mechanical quality coefficient) A detailed deciion can be made on the element uing the reonance of a piezoelectric element or inductor IM9000 (factory firmware for the IM570) Note: The IM9000 i not included in the tandard package. If you want to ue the IM9000 function, pecify the upon purchae. Cutomer who have purchaed the Impedance Analyzer IM570 can add the Equivalent Circuit Analyi Firmware IM9000 function. Pleae contact your local HIOKI repreentative. 6 X-Y diplay Simulation: Enable diplaying and comparing the ideal frequency characteritic graph derived from the analyi reult or the value pecified by the uer Comparator: Run a comparator on the analyi reult and output the deciion reult to creen, EXT. I/O Cole-Cole plot, Admittance circle diplay

4 Frequency from DC, 4Hz to 8MHz LCR METER IM56 meauring SMD with electrode on the bottom, DC to 8 MHz, Meaurable ample ize: to 0402 (EIA), 0402 to 1005 (JIS) SMD TEST FIXTURE 926 DC to 8 MHz, Tet ample dimenion:1 mm (0.04 in) to 10 mm (0.9 in) 4-TERMINAL PROBE L2000 Cable length 1 m (.28 ft), DC to 8 meaurable conductor diameter: ø0. Cable length 7 cm (28.74 ft), DC to 8 tip electrode pacing: 0. (0.01 in) to 4-TERMINAL PROBE SMD TEST FIXTURE 9677 Cable length 1 m (.28 ft), DC to 200 khz, impedance characteritic of 50 Ω, meaurable conductor diameter: φ0. mm (0.01 in) to 2 mm (0.08 in) meauring SMD with electrode on the ide; DC to 120 MHz, tet ample dimenion:.5 mm ±0.5 mm (0.14 in ±0.02 in) the L2001, regular ize, 4-TERMINAL PROBE TEST FIXTURE the L2001, mall ize Cable length 1 m (.28 ft), DC to 200 khz, 50 Ω, meaurable conductor diameter: φ0. mm Cable length 1 m (.28 ft), DC to 8 meaurable conductor diameter: ø0. (0.01 in) to 1.5 mm (0.06 in) DC to 8 MHz, meaurable conductor diameter: ø0. (0.01 in) to 2 mm (0.08 in) When uing the or , external contantvoltage and contant-current ource are required. SMD with electrode on the bottom; DC to 120 MHz, tet ample dimenion: 1.0 DC BIAS VOLTAGE UNIT DC BIAS CURRENT UNIT Hz to 2 MHz, maximum Hz to 8 MHz, maximum applied voltage of DC ±40 V applied current of DC 2 A SMD TEST FIXTURE IM9100 mode LCR mode, Continuou meaurement mode parameter Z, Y, θ, X, G, B, Q, Rdc (DC reitance), R (ESR), Rp, L, Lp, C, Cp, D (tanδ), σ, ε range 100 mω to 100 MΩ, 10 range (All parameter are determined according to Z) Z: 0.00 m to GΩ, R, Rp, Rdc, X: ±(0.00 m to GΩ) G, B: ±(0.000 n to GS), L, Lp: ±( μ to GH), C, Cp: ±( p to GF), Y: n to GS, range θ : ±(0.000 to ), Q: ±(0.00 to ), D : ±( to ), Δ % : ±(0.000 % to %) Z ±0.05% rdg. θ: ±0.0 (repreetative value, Meaurable range: 1 mω to 200 MΩ) frequency 4 Hz to 8 MHz (10 mhz to 100 Hz tep) [Normal mode: V mode/cv mode] 4 Hz to MHz: 10 mv to 5 V (maximum 50 ma) MHz to 8 MHz: 10 mv to 1 V (maximum 10mA) [Low impedance high accuracy mode: V mode/cv mode] 4 Hz to MHz: 10 mv to 1 V (maximum 100 ma) [Normal mode: CC mode] DC, 4Hz to 8MHz meaurement frequency 4 Hz to MHz: 10 μa to 50 ma (maximum 5 V) High-peed meaurement of 1m (fatet time) MHz to 8 MHz: 10 μa to 10 ma (maximum 1 V) High-preciion meaurement of ±0.05% rdg. (repreentative value) [Low impedance high accuracy mode: CC mode] 4 Hz to MHz: 10 μa to 100 ma (maximum 1 V) Guaranteed accuracy range from 1 mω, low-impedance meaurement with [DC reitance meaurement] unmatched repeatability : Fixed at 1 V DC bia function: Meaure under condition imulating actual ue or in Generating range: DC voltage 0 V to 2.50 V (10mV reolution) DC bia accordance with indutry tandard In low Z high accuracy mode: 0 V to 1 V (10 mv reolution) meaurement Exceptional pecification and cot-performance for a wide range of application, Output impedance Normal mode: 100 Ω, Low impedance high accuracy mode: 10 Ω from R&D to production line 5.7-inch color TFT with touch panel Comparator, BIN meaurement (10 categorie for 2 meaurement parameter), Trigger function, Open/hort compenation, Contact check, Panel loading/aving, Memory function IM56 EXT. I/O( HANDLER),USB, USB flah drive, LAN, GP-IB, RS-22C, BCD Note: Tet fixture are not upplied with the intrument. Select al tet fixture or 100 to 240 V AC, 50/60 Hz, 50 VA max. probe when ordering. Dimenion and ma 0 mm (12.99 in) W 119 mm (4.69 in) H 20 mm (9.06 in) D, 4.2 kg (148.1 oz) Power cord 1, Intruction manual 1, LCR application dic (Communication uer manual) 1 RS-22C CABLE m (5.91 ft) length Ideal for Production Line and Automated Teting LCR METER IM52 mode LCR, Continuou teting parameter Z, Y, θ, R (ESR), Rp, DCR (DC reitance), X, G, B, C, Cp, L, Lp, D (tanδ), Q range 100 mω to 100 MΩ, 10 range (All parameter defined in term of Z.) Z, Y, R, Rp, Rdc, X, G, B, L, Lp, C, Cp : able range frequency ±0.05% accuracy with wide meaurement range (DC, 40Hz to 200kHz, 5mV to 5V, 10uA to 50mA) Non-top teting over mixed meaurement condition uch a C-D and ESR at 10 time the peed of previou model (compared with Model 52-50) Built-in comparator and BIN function Rapid 2mec tet time IM52 Thi product i not upplied with meaurement probe or tet fixture. Pleae elect and purchae the meaurement probe or tet fixture appropriate for your application eparately. All probe are contructed with a 1.5D-2V coaxial cable. For an RS-22C connection: A croover cable for interconnection can be ued. You can ue the RS-22C CABLE 967 without hardware flow control. IM590, IM5, IM52 hared Output impedance time Dimenion and ma ± ( [unit] to G [unit]) Real value diplay for Z and Y only θ: ± (0.000 to ), D: ± ( to ) Q: ± (0.00 to ), Δ%: ± (0.0000% to %) Z : ±0.05% rdg. θ: ± Hz to 200 khz (1 mhz to 10 Hz tep) [Normal mode] V mode, CV mode: 5 mv to 5 Vrm, 1 mvrm tep CC mode: 10 μa to 50 marm, 10 μarm tep Normal mode: 100 Ω Monochrome LCD 2 m (1 khz, FAST, repreentative value) Comparator, BIN meaurement (claify function), Panel loading/aving, Memory function EXT I/O (handler), USB communication (high-peed) Optional: Chooe 1 from RS-22C, GP-IB, or LAN 100 to 240 V AC, 50/60 Hz, 50 VA max 260 mm (10.24 in) W 88 mm (.46 in) H 20 mm (7.99 in) D, 2.4 kg (84.7 oz) Power cord 1, Intruction manual 1, CD-R (Include PC command and ample oftware) 1 Pleae ee hared for model IM590 7

5 From R&D Application to Winding, Coil and Tranformer Manufacturing LCR METER IM5 IM5 mode parameter range able range frequency ±0.05% accuracy with wide meaurement range (DC, 40Hz to 200kHz, 5mV to 5V, 10uA to 50mA) Non-top teting over mixed meaurement condition uch a C-D and ESR at 10 time the peed of previou model Built-in low impedance high preciion mode effective for teting low inductance or the ESR of aluminum electrolyi capacitance (10 the meaurement peed and dramatic improvement in repeatability and tability over the previou model ) Dedicated mode for meauring tranformer winding ratio, mutual inductance and temperature compenated DCR Frequency weep teting (IM5-01 only) 2m/4m cable etting in addition to the tandard 0m/1m IM5 IM5-01 (baic model) (added more functional model) Output impedance time Dimenion and ma IM5-01 LCR, Tranformer teting (N, M, ΔL), Analyzer (weep teting), Continuou Teting (LCR/Analyzer mode) Z, Y, θ, R (ESR), Rp, DCR (DC reitance), X, G, B, C, Cp, L, Lp, D (tanδ), Q, N, M, ΔL, T 100 mω to 100 MΩ, 10 range (All parameter defined in term of Z.) Z, Y, R, Rp, Rdc, X, G, B, L, Lp, C, Cp : ± ( [unit] to G [unit]) Real value diplay for Z and Y only θ: ± (0.000 to ), D: ± ( to ) Q: ± (0.00 to ), Δ%: ± (0.0000% to %), T: C to 99.9 C Z : ±0.05% rdg. θ: ±0.0 1 mhz to 200 khz (1 mhz to 10 Hz tep) [Normal mode] V mode, CV mode: 5 mv to 5 Vrm, 1 mvrm tep CC mode: 10 μa to 50 marm, 10 μarm tep [Low impedance high accuracy mode] V mode, CV mode: 5 mv to 2.5 Vrm, 1 mvrm tep CC mode: 10 μa to 100 marm, 10 μarm tep Normal mode: 100 Ω, Low impedance high accuracy mode: 25 Ω 5.7-inch touch-creen color TFT, diplay can be et to ON/OFF 2 m (1 khz, FAST, diplay OFF, repreentative value) DC bia meaurement, DC reitance temperature compenation (converted reference temperature diplay), Comparator, BIN meaurement (claify function), Panel loading/aving, Memory function EXT I/O (Handler), USB communication (high-peed), USB memory Optional: Chooe 1 from RS-22C, GP-IB, or LAN 100 to 240 V AC, 50/60 Hz, 50 VA max 0 mm (12.99 in) W 119 mm (4.69 in) H 168 mm (6.61 in) D,.1 kg (109. oz) Power cord 1, Intruction manual 1, CD-R (Include PC command and ample oftware) 1 LCR, Tranformer teting (N, M, ΔL), Continuou teting (LCR mode) Thi product i not upplied with meaurement probe or tet fixture. Pleae elect and purchae the meaurement probe or tet fixture appropriate for your application eparately. All probe are contructed with a 1.5D-2V coaxial cable. For an RS-22C connection: A croover cable for interconnection can be ued. You can ue the RS-22C CABLE 967 without hardware flow control. Pleae ee hared for model IM590 IM590, IM5, IM52 hared Compact & Powerful Dedicated LCR in 5 mec Timeframe LCR HiTESTER 511 Baic pecification (Accuracy guaranteed for 6 month, Pot-adjutment accuracy guaranteed for 6 month) parameter Z, θ, R, C, L, D (tanδ), Q Z, R: 10 mω to MΩ θ: to C (at 120 Hz): 9.40 pf to mf, C (at 1 khz): pf to mf L (at 120 Hz): µh to kh, L (at 1 khz): µh to kh range D: to , Q: 0.85 to Z : ±0.08 % rdg. θ: ±0.05 frequency 120 Hz or 1 khz 50 mv, 500 mv, 1 V rm Output impedance 50 Ω LED (5-digit diplay, full-cale count depend on range) Fat: 1 mec, Normal: 90 mec, Slow: 400 mec. (at 120 Hz) time Fat: 5 mec, Normal: 60 mec, Slow: 00 mec. (at 1 khz) DC voltage/dc current can be uperimpoed on the meaurement ignal. DC bia (Require al unit and external contant voltage ource/contant current ource.) High peed meaurement: 5 m (1 khz) or 1 m (120 Hz) Built-in high-peed comparator frequency: 1 khz/120 Hz electable From minute meaurement with a maximum reolution of 0.01 pf to high-capacity meaurement up to 1 F Print meaured value and comparator reult with the Printer 9442 () Panel ave and load function, External input/output (EXT. I/O), GP-IB () or RS-22C interface Selectable 100, 120, 220 or 240V AC ±10%, 50/60Hz, 20VA max. Dimenion and ma 210 mm (8.27 in)w 100 mm (.94 in)h 168 mm (6.61 in)d, 2.5 kg (88.2 oz) Intruction manual 1, Power cord 1, Spare fue Thi product i not upplied with meaurement probe or tet fixture. Pleae elect and purchae the meaurement probe or tet fixture appropriate for your application eparately. For an RS-22C connection: A croover cable for interconnection can be ued. You can ue the RS-22C CABLE 967 without hardware flow control. TEST FIXTURE 9261 Impedance characteritic of 75 Ω, 4-terminal configuration, Other pecification are the ame a for the Cable length 7 cm (28.74 ft), DC to 8 tip electrode pacing: 0. (0.01 in) to 4-TERMINAL PROBE 9140 DC to 100 khz, impedance characteritic of 75 Ω, 4-terminal configuration SMD TEST FIXTURE 9677 meauring SMD with electrode on the bottom; DC to 120 MHz, meauring SMD with electrode tet ample dimenion: 1.0 mm on the ide; DC to 120 MHz, tet the L2001, regular ize, the L2001, mall ize (0.04 in) to 4.0 mm (0.16 in) wide, ample dimenion:.5 mm ±0.5 mm (0.14 in ±0.02 in) Note: The cannot be ued with the , ue with the 9268/9269, Not CE marked DC BIAS CURRENT UNIT Hz to 100 khz, Max. allowable current: ±2A DC DC BIAS VOLTAGE UNIT Hz to 5 MHz, Max. allowable voltage: ± 40 V DC CONNECTION CORD 9166 Metal BNC to clip, 1.5 m (4.92 ft) length CONNECTION CORD 9165 Cord ha metallic BNC connector at both end, ue at metallic terminal, 1.5 m (4.92 ft) length, not CE marked SMD TEST FIXTURE 926 DC to 8 MHz, meaurable conductor DC to 8 MHz, Tet ample diameter: ø0. (0.01 in) to 2 dimenion:1 mm (0.04 in) to mm (0.08 in) 10 mm (0.9 in) PRINTER 9442 AC ADAPTER For printing numerical value 112 mm (4.41 in) paper width EU type meauring SMD with electrode on the bottom, DC to 8 MHz, Meaurable ample ize: to 0402 (EIA), 0402 to 1005 (JIS) Printer SMD TEST FIXTURE IM9100 GP-IB INTERFACE Built into rear panel CONNECTION RECORDING CABLE 9444 PAPER pin - 9 pin, 1.5 m (4.92 ft) length 112 mm (4.41 in) 25 m (82.0 ft), 10 roll/et

6 High-peed 1MHz C Teter Delivering Super Precie Even from Low Capacitance Level C METER Thi product i not upplied with meaurement probe or tet fixture. Pleae elect and purchae the meaurement probe or tet fixture appropriate for your application eparately. For an RS-22C connection: A croover cable for interconnection can be ued. You can ue the RS-22C cable 967 without hardware flow control. SMD TEST FIXTURE IM TERMINAL PROBE L2000 SMD with electrode on the bottom, DC to 8 MHz, Meaurable ample ize: to 0402 (EIA), 0402 to 1005 (JIS) 1 m (.28 ft) Cable length, DC to 5 MHz, 50 Ω, meaurable conductor diameter: φ0. mm Cable length 7 cm (28.74 ft), DC to 8 tip electrode pacing: 0. (0.01 in) to the L2001, regular ize, AC ADAPTER pin 9 pin, 1.5 m (4.92 ft) length the L2001, mall ize EU type 4-TERMINAL PROBE Cable length 1 m (.28 ft), DC to 200 khz, 50 Ω, meaurable conductor diameter: φ0. mm TEST FIXTURE Cable length 1 m (.28 ft), DC to 5 MHz, 50 Ω, meaurable conductor diameter: φ0. mm (0.01 in) to 1.5 mm (0.06 in) DC to 5 MHz, meaurable conductor diameter: φ0. mm (0.01 in) to 2 mm (0.08 in) 4-TERMINAL PROBE SMD with electrode on the bottom; DC to 120 MHz, tet ample dimenion: 1.0 SMD with electrode on the ide; DC to 120 MHz, tet ample dimenion:.5 mm ±0.5 mm (0.14 in ±0.02 in) DC to 5 MHz, Tet ample dimenion: 1 mm (0.04 in) to 10 mm (0.9 in) 112 mm (4.41 in) 25 m (82.0 ft), 10 roll/et CONNECTION CABLE 9444 SMD TEST FIXTURE 9677 SMD TEST FIXTURE 926 RECORDING PAPER 1196 For printing numerical value 112 mm (4.41 in) paper width PRINTER 9442 Printer High-peed analog tet time of 0.6 m (at 1 MHz) Improved noie reitance and enhanced repeatability in meaurement preciion even for production line 1 khz and 1 MHz meaurement frequency upport table low capacitance teting with taping machine BIN function, for eay component creening parameter C (Capacitance), D (lo coefficient, tan δ), Q (1/tan δ) range C: ff to μf, D: to , Q: 0.0 to (Typ.) C: ±0.14 % rdg., D: ±0.001 frequency 1 khz, 1 MHz 500 mv, 1 V rm Output impedance 1 Ω (at 1 khz in 2.2 μf and higher range), 20 Ω (in range other than the above) LED (ix digit, full cale count depend on meaurement range) time 1.5 m: 1 MHz, 2.0 m: 1 khz BIN (meaurement value can be claified by rank), Trigger-ynchronou output, Setting configuration can be tored, Comparator, Averaging, Low-C reject (bad contact detection), Chatter detection, Current detection circuit monitoring, Applied voltage value monitoring, EXT. I/O, RS-22C, GP-IB Selectable from 100, 120, 220 or 240 V AC ±10 %, 50/60 Hz 40 VA max. Dimenion and ma 260 mm (10.24 in) W 100 mm (.94 in) H 298 mm (11.7 in) D, 4.8 kg (169. oz) Power cord 1, Intruction manual 1, Spare fue 1 Cable length 1 m (.28 ft), DC to 200 khz, 50 Ω, meaurable conductor diameter: φ0. mm (0.01 in) to 2 mm (0.08 in) High-peed, Large-capacitance MLCC Inpection with Contant Voltage C HiTESTER 504 Baic pecification (Accuracy guaranteed for 6 month, Pot-adjutment accuracy guaranteed for 6 month) parameter C (capacitance), D (lo coefficient tan δ) range C: pf to mf, D: to (Typ.) C: ±0.09 % rdg. ±10 dgt., D: ± frequency 120 Hz, 1 khz 100 mv ( only), 500 mv, 1 V rm CV 100 mv range: up to 170 μf range (Source frequency 1 khz), up to 1.45 mf range (Source frequency 120 Hz) CV 500 mv range : up to 170 μf range (Source frequency 1 khz), up to 1.45 mf range (Source frequency 120 Hz) CV 1V range : up to 70 μf range (Source frequency 1 khz), up to 700 μf range (Source frequency 120 Hz) Output impedance 5Ω (In open terminal voltage mode outide of the CV meaurement range) LED (ix digit, full cale count depend on meaurement range) time 2 m (Typ. value. Depend on meaurement configuration etting) High peed meaurement of 2m Support C meaurement with voltage dependency characteritic through the ue of contant voltage teting (CV) Model can detect contact failure on all 4 terminal for increaed reliability BIN function on the /-50 i ideal for orting machine Model offer high peed and affordability, perfect for integrating into taping machine In all model, contact error i contantly monitored during meaurement, contributing to increaed yield (with RS-22C interface) (with GP-IB, RS-22C) (with GP-IB, RS-22C) Thi product i not upplied with meaurement probe or tet fixture. Pleae elect and purchae the meaurement probe or tet fixture appropriate for your application eparately. For an RS-22C connection: A croover cable for interconnection can be ued. You can ue the RS-22C CABLE 967 without hardware flow control. Cable length 7 cm (28.74 ft), DC to 8 50 Ω, 4-terminal pair configuration, tip electrode pacing: 0. (0.01 in) to the L2001, regular ize, the L2001, mall ize Selectable from 100, 120, 220 or 240 V AC ±10 %, 50/60 Hz, 110 VA max. Dimenion and ma 260 mm (10.24 in)w 100 mm (.94 in)h 220 mm (8.66 in)d,.8 kg(14.0 oz) Power cord 1, Intruction manual 1, Spare fue 1 SMD with electrode on the bottom; DC to 120 MHz, tet ample dimenion: 1.0 PRINTER 9442 For printing numerical value 112 mm (4.41 in) paper width AC ADAPTER EU type CONNECTION CABLE pin - 9 pin, 1.5 m (4.92 ft) length SMD TEST FIXTURE 9677 SMD TEST FIXTURE 926 meauring SMD with electrode on the ide; DC to 120 MHz, tet ample dimenion:.5 mm ±0.5 mm (0.14 in ±0.02 in) DC to 8 MHz, Tet ample dimenion:1 mm (0.04 in) to 10 mm (0.9 in) RECORDING PAPER mm (4.41 in) 25 m (82.0 ft), 10 roll/et DC to 8 MHz, meaurable conductor diameter: ø0. (0.01 in) to 2 mm (0.08 in) Printer 4-terminal contact check function ( only) BIN (meaurement value can be claified by rank) (504-50, ), Triggerynchronou output, Setting configuration can be tored, Comparator, Averaging, Low-C reject (bad contact detection), Chatter detection, EXT. I/O, RS-22C (all model tandard), GP-IB (504-50, ) TEST FIXTURE 9261 Impedance characteritic of 75 Ω, 4-terminal configuration, Other pecification are the ame a for the TERMINAL PROBE 9140 DC to 100 khz, impedance characteritic of 75 Ω, 4-terminal configuration 9

7 For and Impedance Analyzer Probe & Tet Fixture and Applicable SMD ize Pleae ue the probe pecified below. For probe characteritic impedance of 50 Ω, a 50 Ω coaxial cable i ued. For probe characteritic impedance of 75 Ω, a 75 Ω coaxial cable i ued. Max : 2 mm Probe and Tet Fixture for Lead Component 85 mm 188 mm mm 5 mm 1000 mm FOUR-TERMINAL PROBE L2000 Cable length 1 m (.28 ft), DC to 8 MHz, impedance characteritic of 50 Ω, 4-terminal pair configuration, meaurable conductor diameter: ø0. (0.01 in) to 5 mm (0.20 in) 84 mm DC to 8 MHz, meaurable conductor diameter: ø0. (0.01 in) to 2 mm (0.08 in) 20 mm Max φ5.0 mm 94 mm 160 mm 1000 mm 8 mm TEST FIXTURE mm FOUR-TERMINAL PROBE FOUR-TERMINAL PROBE Cable length 1 m (.28 ft), DC to 200 khz, 9140 impedance characteritic of 50 Ω, 4-terminal pair configuration, meaurable conductor diameter: ø0. Max: 1.5 mm An electrode in cloe-up Cable length 1 m (.28 ft), DC to 100 khz, impedance characteritic of 75 Ω, 4-terminal configuration, meaurable conductor diameter: ø0. Cable length 1 m (.28 ft), DC to 8 meaurable conductor diameter: ø0. (0.01 in) to 1.5 mm (0.06 in) 20 mm Max φ5.0 mm 8 mm TEST FIXTURE 9261 Impedance characteritic of 75 Ω, 4-terminal configuration, Other pecification are the ame a for the Tet Fixture for SMD Applicable SMD ize SMD type JIS CODE EIA CODE Length: L : Meaurable : May not be meaurable depending on the hape. Width: W mm (0.02 in) 0.20 mm (0.01 in) mm (0.02 in) 0.0 mm (0.01 in) mm (0.04 in) 0.50 mm (0.02 in) mm (0.06 in) 0.80 mm (0.0 in) mm (0.1 in) 1.60 mm (0.06 in) mm (0.08 in) 1.25 mm (0.05 in) mm (0.1 in) 2.50 mm (0.10 in) mm (0.18 in).20 mm (0.1 in) mm (0.22 in) 5.00 mm (0.20 in) IM9100 L2001 L2001 with with tip tip High-preciion fourterminal meaurement SMD poitioning mechanim Tet piece can be poitioned eaily and reliably uing template and guide groove for variou SMD ize. SMD TEST FIXTURE IM9100 SMD with electrode on the bottom, DC to 8MHz, Meaurable ample ize: to 0402 (EIA) The fixture ue table, high-preciion fourterminal meaurement to reliably apply four probe to the SMD mall electrode Probe Guide groove Note: Thi product i built-to-order o pleae confirm pecification and delivery time with your local HIOKI ditributor. Cable length 7 cm (2.40 ft), DC to 8 50 Ω, 4-terminal pair configuration, tip electrode pacing: 0. (0.01 in) to 6 mm (0.24 in) the L2001, regular ize, the L2001, mall ize SMD with electrode on the bottom; DC to 120 MHz, tet ample dimenion: mm 4 mm An electrode in cloe-up 11mm 4 mm SMD with electrode on the ide; DC to 120 MHz, tet ample dimenion:.5 mm ±0.5 mm (0.14 in ±0.02 in) 40 Max: 4 mm Min: 0.1 mm Depth: 0. mm An electrode in cloe-up SMD TEST FIXTURE mm SMD TEST FIXTURE mm An electrode in cloe-up DC to 8 MHz, Tet ample dimenion:1 mm (0.04 in) to 10 mm (0.9 in) Max: 10 mm