Ideal for testing taping machines and sorters C METER C HiTESTER / / Electronic measuring instruments
|
|
- Eric Bell
- 6 years ago
- Views:
Transcription
1 METER HiTESTER /504-50/ Electronic measuring instruments For Low apacitance METER Measures at 1 khz and 1 MHz For High apacitance MLs HiTESTERs , and Measures at 120 Hz and 1 khz Ideal for testing taping machines and sorters METER High-speed measurement with an analog measurement time of 0.6 ms (1 MHz) Improved noise resistance and dramatically increased repeatability for measurement of minuscule capacitance values Stable measurement of low-capacitance capacitors at 1 MHz HiTESTER /504-50/ onstant-voltage measurement with an analog measurement time of 1 ms (1 khz); ideal for measurement of high-capacitance MLs onstant-voltage measurement of high capacitance values up to 1.45 mf (120 Hz, 500 mv) Model provides four-terminal contact checking.
2 2 METER Analog measurement times as low as 0.6 ms for improved capacitor productivity ommon Features of Models , , and n -Meter measurement frequencies comply with JIS apacitor Type Range 1000 pf Non-Electrolytic 1000 pf < 10 µf 10 µf < Electrolytic - Measurement Frequency [Hz] Supporting Indicates recommended frequency 1k M Models (for ref.) n BIN function measurement values can be classified into up to 14 *1 ranks for easy sorting. *1 Models support up to 1 ranks. n omparator function Upper and lower limits can be specified for first () and second () parameters. Evaluation results can be indicated by beeper, LE indicators and external output, with the setting values always displayed. n Memory function Measurement data is stored in the instrument and can be downloaded via GP-IB or RS ,000 measurements , and ,000 measurements n Intuitive operation with LE indicators Simply select the desired operation on the front panel. The current measurement configuration settings are indicated by LEs so you can check your settings at a glance. n Trigger-synchronous output The measurement signal is applied to the test sample only when a measurement trigger is applied. Because large current does not flow when making and breaking contact with the sample, contact point wear is minimized. n Stores 99 *2 measurement configurations Store up to 99 sets of measurement configuration settings for quick recall when switching test sample types on lines with many repeating measurements. Any measurement configuration can be recalled by EXT I/O. *2 Models store up to 70 measurement configurations. n ontact-checking functions included etect contact errors during measurement. Improve yield rates by separately managing samples that exhibit contact errors.
3 n High-speed measurements as fast as 1.5 ms (0.6 ms for analog measurements) High-speed testing such as with taping machines is supported by the 1.5 ms minimum measurement time (at FAST, 1 MHz measurements, ). Select from FAST, NORMAL and SLOW measurement speeds Measurement Frequency 1kHz 1MHz Measurement Speed Output Signal FAST NORMAL SLOW INEX 1.1ms 4.1ms 1.ms EOM 2ms 5ms 14ms INEX 0.6ms 4.1ms 1.ms EOM 1.5ms 5ms 14ms , , Measurement Frequency 120 Hz 1 khz Measurement Speed Output Signal FAST NORMAL SLOW INEX 8. ms. ms 1. ms EOM 10 ms 7.5 ms 146 ms INEX 1 ms 4 ms 24 ms EOM 2 ms 5.5 ms 29.5 ms Easy integration into automatic testing equipment EXT I/O RS-22 GP-IB Voltage selector EXT I/O Voltage selector GP-IB * RS-22 * Model does not include a GP-IB interface. METER HiTESTER , , n EXT I/O Triggering and loading of measurement conditions can be controlled externally. apable of external output of comparator results, BIN measurement results, and end-ofmeasurement signals, these meters support full interfacing with automated devices. n EXT I/O Timing hart TRIG 1 huck 1 End-of-Measurement 2 Transport 2 huck Inputs External power input (+5 to 24 V, may be supplied from external device) External trigger signal Panel number (Measurement configuration) selection Panel-number-valid signal alibration EXT I/O Features Outputs Internal power output (+5 V) omparator result output (first and second parameters, and ANed results) Bin measurement judgment output Analog End-of-Measurement signal End-of-Measurement signal Error message output INEX EOM HI, IN, LO, BIN 0 Judgment 0.6 ms* 1 Analog Measurement 1.5 ms* 1 Measuring 1 Analog End-of-Measurement 1 End-of-Measurement 1 Judgment * Measurement Speed: FAST used for example. Applicable for 1 MHz measurements. n RS-22 and GP-IB interface *4 Except for turning the instrument's power on and off, all meter functions can be controlled from a computer. This facilitates efficient data handling when controlling or processing data in batches on a computer or when setting instrument processing or measurement conditions. *4 GP-IB is available on Model , , RS-22 interface Transfer method: Start-stop transfer ata length: 8 bits Stop bit: 1 bit GP-IB interface Transfer speed: 9600, bps Parity: None elimiter: R+LF, R IEEE common commands (mandatory) can be used onformance standard: IEEE Reference standard: IEEE
4 4 METER Measure low-magnitude capacitors with high accuracy Measurement parameters and frequency ranges Measurement Frequencies Range of Measurements (, ) 120 Hz 1 khz 1 MHz : ff to µf : to N/A Features of Models METER n Faster measurement and improved repeatability ompared to the previous model (506), the delivers higher measurement speeds in FAST mode and an improvement by a factor of approximately 7 in repeatability for measurement of minuscule capacitance values in high-noise environments. These characteristics make the instrument ideal for embedded measurement in taping machines, sorters, and other automatic systems. n Enhanced absolute accuracy A self-calibration function minimizes variations in measurement values due to changes in ambient temperature. In addition, the cable-length-compensation function minimizes measurement errors when the measurement cable is extended from 1 to 2 meters (using 1.5-2V cable). -value repeatability during 1 pf measurement 1.6% 1.4% 1.2% 1.0% 0.8% 0.6% 0.4% 0.2% 0.0% Power supply noise of 0 V Power supply noise of 1,500 V Improvement by a factor of about 7 in repeatability in highnoise environments 0.025% 0.21% 0.016% 1.4% Faster measurement (Analog measurement time, FAST mode) 0.6ms 1.1ms (INEX=0.6ms) 506 (INEX=1.1ms) Repeatability in high-noise environments (1 MHz, 1 V, FAST mode) n Enhanced contact-checking function ontact errors while measuring can be detected by the hatter etection function, Low- Reject function, urrent etection ircuit Monitoring function and the Applied Voltage Value Monitoring function. Yield rates are improved by judging measurement-object contact errors as ERR instead of FAIL. Extremely low capacitance judged as Low (ERR) hatter Faulty ontact hatter hatter etection Function Unstable Voltage and urrent While Measuring ERR Pass / Fail Judgment ontact ondition Normal ontact hatter etection Function Stable Voltage and urrent While Measuring Pass / Fail Judgment hatter Monitoring Interval INEX Analog Measurement Low- Reject Function hatter etection Function
5 5 n Specifications Measured parameters (apacitance), (dissipation factor tan δ), Q (1/tan δ) Measurement frequencies Measurement signal level Range of measurable values 1 khz and 1 MHz Accuracy: ±0.01% or better Frequency shift: 1 MHz ±1%, ±2% Open-circuit terminal voltage: 500 mv or 1 V Signal level accuracy: ±10% ±5 mv Output resistance: Approx. 1Ω (@1 khz in 2.2 μf and higher ranges), approx. 20 Ω (in ranges other than the above) : ff to μf : to Q: 0.0 to Equivalent circuit mode Series-Parallel Equivalent ircuit mode (Auto/Manual) Representative value: 1.5 ms (FAST) Measurement time (Actual measurement time depends on measurement configuration settings) Measurement speed FAST, NORMAL and SLOW Averaging function 1 to 256 Low- reject function Bad ontact etection (open circuit between terminals) hatter detection function Bad ontact etection (chatter) urrent detection circuit monitoring function Applied voltage value monitoring function Trigger function Trigger delay Memory function A measurement signal fault is detected when external noise causes measurement levels to be out of tolerance for the measurement range. An error is detected when voltage monitored across a test sample is outside of the judgment standard. Internal and external triggers can be enabled 0 to s Up to 1,000 measurement values can be stored in the instrument (ownloadable by GP-IB and RS-22) ompensation Trigger-synchronous output function Key-lock function BIN measurement omparator Panel save and load Audible beeper Interface Printer function isplay device Operating temperature and humidity Storage temperature and humidity METER Open- and short-circuit compensation, load and cable length compensation, and self calibration Functions to inhibit measurement voltage except while actually measuring Settings can be made and cancelled by front panel keys : 1 ranks, -NG, OUT OF BINS, Absolute value setting, setting, % setting : HI, IN, LO; (Q): HI, IN, LO Absolute value setting, setting, % setting 70 setting configurations can be stored Load method: key operation or external I/O Setting the buzzer for comparator judgment results (IN or NG) to ON or OFF is possible RS-22, GP-IB and EXT I/O (included as standard) Measurement values can be printed (requires Model 9442 or 9444 cable) LEs (on/off) 0 to 40, 80% rh or less (non-condensating) -10 to 55, 80% rh or less (non-condensating) Operating environment Indoors, to 2000 m ASL Power supply Selectable 100, 120, 220 or 240 V ±10%, 50/60 Hz Max. power consumption 40 VA Withstand voltage Power line to ground: 1.9 kv A for 15 s Backup battery life Approx. 6 years imensions Approx. 260 W 100 H 298 mm (10.24" W.94" H 11.7" ) (exc. projections) Mass Approx. 4.8 kg (169. oz) Applicable standards EM: EN6126, EN , EN Safety: EN Supplied accessories Power ord, Spare Fuse Measurement accuracy and range Temp. and humidity for guaranteed accuracy: 2 ±5%, 80% rh or less (non-condensating) Warm-up time: 1 h, with open- and short-circuit compensation, and self calibration set to Auto n Measurement area : ff to μf; : to n Measurement accuracy n Basic accuracy [Guaranteed accuracy: 6 months when 0.1] Use the following equation to calculate the measurement accuracy. Measurement accuracy = basic accuracy B E [B: Measurement signal level coefficient] 1 V: 1, 500 mv: 2 [: Measurement speed coefficient] FAST: 1.5 (1kHz), (1MHz) NORMAL: 1.2, SLOW: 1 [: able length coefficient] (using 1.5-2V cable) 0 m: 1, 1 m: 1.5, 2 m: 2 [E: Temperature coefficient] t-2 t = operating temperature ( ) range Parameter 100 pf 220 pf 470 pf 1 nf 2.2 nf 4.7 nf 10 nf 22 nf 47 nf 100 nf 220 nf 470 nf 1 μf 2.2 μf 4.7 μf 10 μf Accuracy 1 khz 0.12%rdg+0.2%rdg (r/x) (r/x) 0.12%rdg+0.08%rdg (r/x) (r/x) 0.12%rdg+0.04%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) range Parameter 220 ff 470 ff 1 pf 2.2 pf 4.7 pf 10 pf 22 pf 47 pf 100 pf 220 pf 470 pf 1 nf Accuracy 1 MHz 0.2%rdg+1%rdg (r/x) (r/x) 0.15%rdg+0.%rdg (r/x) (r/x) 0.12%rdg+0.16%rdg (r/x) (r/x) 0.12%rdg+0.08%rdg (r/x) (r/x) 0.12%rdg+0.04%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) 0.12%rdg+0.02%rdg (r/x) (r/x) [x : the electrical capacity of the sample / r : the electrical capacity of the measurement range]
6 6 HiTESTER , and Perform high-speed, constant-voltage testing even of high-capacitance MLs Measurement parameters and frequency ranges Measurement Frequencies Range of Measurements (, ) 120 Hz 1 khz 1 MHz : pf to mf : to N/A Functional differences between Models , and onstant-voltage Four-Terminal Measurement (V) Bin Interface ontact heck Function 100mV 500mV 1V Function RS-22 GP-IB EXT I/O N/A N/A N/A N/A N/A N/A Features of Model , and HiTESTERs n onstant voltage measurement (V) onstant measuring voltages of 1 V, 500 mv and 100 mv *1 are provided for voltage-dependent capacitance measurements. Measurement frequency is selectable from 120 Hz or 1 khz. *1 100 mv in Model only. n ompatible with taping machine assemblies Model provides the speed and good cost-performance suitable for taping machine systems. n Specifications Measured parameters (capacitance), (dissipation factor tan δ) Measurement frequencies Measurement signal level *1 100 mv in Model only Range of measurable values 120 Hz or 1 khz Accuracy: ±0.01% or better (1) onstant voltage mode: 100 mv *1, 500 mv and 1 V V 1V measurement ranges: up to 70 μf range (1 khz) up to 0.7 mf range (120 Hz) V100 mv *1, V 500 mv measurement ranges: up to 170 μf range (1 khz) up to 1.45 mf range (120 Hz) Signal level accuracy: ±10% ±5 mv (2) Open terminal voltage mode: 100 mv *1, 500 mv and 1 V Measurement range: Other than the above Output resistance: approx. 5Ω Signal level accuracy: ±10% ±5 mv : pf to mf : to Equivalent circuit mode Series/parallel equivalent-circuit mode (Auto/Manual) Nominal 2 ms (1 khz, FAST) Measurement time (The measurement time differs depending on the measurement frequency and measurement speed that are set.) Measurement speed FAST / NORMAL / SLOW Trigger function Internal and external trigger sources can be selected. Trigger delay 0 to s (at s resolution) ompensation Open, Short, Load and Offset compensation, Self-calibrating Averaging function 1 to 256 Four-terminal contact-checking function* (* only) etects contact anomalies (open state in four-terminal measurements) etects contact anomalies (open state in two-terminal Low- reject function measurements) hatter detection function etects contact bounce (chatter) n Four-Terminal ontact-hecking Function The features a 4-terminal contact checking mechanism. etection of contact errors involving all four terminals, including the POT terminal, ensures improved measured value reliability. n Enhanced ontact-hecking Functions ontact errors can be detected while measuring by the Low- Reject and hatter etection functions. Yield rates are improved by judging measurement object contact errors as ERR instead of FAIL. Trigger-synchronous output function Key-lock function BIN measurement (Not available on the ) Function to apply a measurement signal only when performing measurement. The key lock can be set and cancelled by key operation on the front panel ; 14 ranks, -NG, OUT OF BINS Absolute value setting, Δ% setting Memory function Up to 2,000 measurement values can be stored in the instrument (ownloadable by GP-IB and RS-22) omparator : HI / IN / LO, : HI / IN / LO Absolute value setting, Δ% setting Panel save and load Up to 99 sets of measurement conditions can be saved. Load method: Key operation, external I/O. Audible beeper The beeper can be set on or off according to the comparator evaluation result ( IN or NG ) and Bin decision result. Interface Models , : RS-22, GP-IB, EXT I/O (standard) Model : RS-22, EXT I/O (standard) Printer function Measurement values can be printed (requires Printer 9442 and optional onnection able 9444) isplay device LE Operating temperature and humidity 0 to 40, 80% rh or less (no condensation) Storage temperature and humidity -10 to 55, 80% rh or less (no condensation) Operating environment Indoors, up to 2000 m ASL Power supply A 100 V, 120 V, 220 V, or 240 V±10% (selectable), 50/60 Hz Max. power consumption 110 VA max. Withstand voltage Power line to ground, A 1.69 kv, 15 sec. Backup battery life Approx. 6 years imensions Approx. 260 (W) 100 (H) 220 () mm (10.24 W.94 H 8.66 ) (excluding protrusions) Mass Approx..8 kg (14.0 oz) Applicable standards EM: EN6126, EN , EN Safety: EN Supplied accessories Power cord, spare fuse
7 7 HiTESTER , and Measurement accuracy and range Temp. and humidity for guaranteed accuracy: 2 ±5%, 80% rh or less (non-condensating) Warm-up time: 1 h, with open- and short-circuit compensation n Measurement area : pf to mf; : to n Measurement accuracy Use the following equation to calculate the measurement accuracy. Measurement accuracy = basic accuracy B E [B: Measurement signal level coefficient] 1 V and 500 mv: 1, 100 mv: 1.5 [: Measurement speed coefficient] FAST: 1.5 NORMAL: 1.0 (at 1 khz, 1 V), 1.2 (except at 1 khz, 1 V) SLOW: 1 [: able length coefficient] (using 1.5-2V cable) 0 m: 1 1 m: 1 (at 1 khz, 1 V) 1.5 (except at 1 khz, 1 V) [E: Temperature coefficient] t-2 t = operating temperature ( ) n Basic accuracy [Guaranteed accuracy: 6 months when 0.1] Range No. range Basic accuracy *2 V 120 Hz 1 khz Parameter 120 Hz 1 khz operation ±0.20%rdg.±00dgt. ±0.20%rdg.±00dgt. ±0.0120±2/L ±0.0120±0.25/L ±0.20%rdg.±60dgt. ±0.20%rdg.±60dgt. ±0.0020±2.2/L ±0.0020±0.265/L ±0.16%rdg.±20dgt. ±0.14%rdg.±20dgt. ±0.006 ±0.006 ±0.15%rdg.±15dgt. ±0.1%rdg.±15dgt. ± ± ±0.15%rdg.±15dgt. ±0.1%rdg.±15dgt. ± ± ±0.15%rdg.±15dgt. ±0.09%rdg.±10dgt. ± ± ±0.25%rdg.±20dgt. ±0.1%rdg.±15dgt. ±0.005 ± pf 20 pf 2 2 nf 200 pf 20 nf 2 nf nf 20 nf 5 2 μf 200 nf 6 20 μf 2 μf μf 20 μf mf(1v) 70 μf(1v) ±1.2%rdg.±50dgt. ±0.7%rdg.±40dgt mf(500 mv, 100 mv) 170 μf(500 mv, 100 mv) ± ± mf 200 μf ±1.2%rdg.±50dgt. ±0.7%rdg.±40dgt. ± ± mf 2 mf ±2.5%rdg.±50dgt. ±2.0%rdg.±40dgt. ±0.0200±0.008 H ±0.0180±0.08 H [L: apacitance of component (pf), H: apacitance of component (mf)] *2 Accuracy of range nos. 1 and 2 are not guaranteed at 100 mv measurement signal level. N/A N/A LR meter for production lines and automated testing LR METER IM52 ± 0.05% accuracy with wide measurement range (R testing, 40Hz to 200kHz, 5mV to 5V, 10uA to 50mA) Non-stop testing over mixed measurement conditions such as - and ESR at 10 times the speed of previous models (compare with the model ) Built-in comparator and BIN functions Rapid 2ms test time This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. All probes are constructed with a 1.5-2V coaxial cable. For an RS-22 connection: A crossover cable for interconnection can be used. You can use the RS-22 ABLE 967 without hardware flow control. Single evice Solution for High Speed Testing and Frequency Sweeping IMPEANE ANALYZER IM570 Special Model with 100 mv Measurement Signal METER mv special model LR measurement, R measurement, sweep measurement, continuous measurement and high-speed testing achieved with one instrument High-speed testing, achieving maximum speeds of 1.5ms (1 khz) and 0.5ms (100kHz) in LR mode High-accuracy measurements, basic accuracy of Z parameter: ± 0.08% This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. For an RS-22 connection: A crossover cable for interconnection can be used. You can use the RS-22 ABLE 967 without hardware flow control. 100 mv measurement signal level (500 mv measurement signal level not available) Ideal for use in applications requiring a low measurement signal level, for example diode junction capacitance measurement ontact your HIOKI distributor for more information about this special model.
8 8 Model onfigurations and Options Probes and Test Fixtures for TERMINAL PROBE L TERMINAL PROBE PINHER PROBE TEST FIXTURE able length 1 m (.28 ft), to 5 MHz, impedance 4 electrode terminals, measurable conductor diameter: ø0. mm (0.01 in) to 5 mm (0.20 in) able length 1 m (.28 ft), to 200 khz, impedance 4 electrode terminals, measurable conductor diameter: ø0. mm (0.01 in) to 5 mm (0.20 in) able length 1 m (.28 ft), to 5 MHz, impedance 2 electrode terminals, tip electrode spacing: 0. (0.01 in) to 6 mm (0.24 in) able length 1 m (.28 ft), to 5 MHz, impedance 4 electrode terminals, measurable conductor diameter: ø0. mm (0.01 in) to 1.5 mm (0.06 in) Probes and Test Fixtures for /504-50/ TERMINAL PROBE 9140 able length 1 m (.28 ft), to 100 khz, impedance characteristics of 75 Ω, 5-terminal configuration, 4 electrode terminals, measurable conductor diameter: ø0. mm (0.01 in) to 5 mm (0.20 in) PINHER PROBE 914 able length 1 m (.28 ft), to 5 MHz, impedance characteristics of 75 Ω, 4-terminal pair configuration, 2 electrode terminals, tip electrode spacing: 0. (0.01 in) to 6 mm (0.24 in) TEST FIXTURE 9261 able length 1 m (.28 ft), to 5 MHz, impedance characteristics of 75 Ω, 4-terminal configuration, 4 electrode terminals, measurable conductor diameter: ø0. mm (0.01 in) to 1.5 mm (0.06 in) 4-TERMINAL PROBE able length 1 m (.28 ft), to 200 khz, impedance 4 electrode terminals, measurable conductor diameter: ø0. mm (0.01 in) to 2 mm (0.08 in) Probes and Test Fixtures for / /504-50/ TEST FIXTURE 9262 SM TEST FIXTURE 926 SM TEST FIXTURE 9677 SM TEST FIXTURE 9699 irect connection type, to 5 MHz, 2 electrode terminals, measurable conductor diameter: ø0. mm (0.01 in) to 2 mm (0.08 in) irect connection type, to 5 MHz, 2 electrode terminals, test sample dimensions:1 mm (0.04 in) to 10 mm (0.9 in) irect connection type, Electrodes on side for SM, to 120 MHz, 2 electrode terminals, test sample dimensions:.5 mm ±0.5 mm (0.14 in ±0.02 in) irect connection type, Electrodes on bottom for SM, to 120 MHz, 2 electrode terminals, test sample dimensions: 1.0 mm (0.04 in) to 4.0 mm (0.16 in) wide, maximum 1.5 mm (0.06 in) high For Low-Magnitude apacitors METER (Measurement frequencies: 1 khz and 1 MHz) For High-Magnitude ML HiTESTER (Measurement frequencies: 120 Hz and 1 khz, four-terminal contact-checking function, constant voltage measurement at 100 mv, 500 mv and 1 V) HiTESTER (Measurement frequencies: 120 Hz and 1 khz constant voltage measurement at 500 mv and 1 V) HiTESTER (Measurement frequencies: 120 Hz and 1 khz constant voltage measurement at 500 mv and 1 V, no GP-IB interface, no Bin function) Probe and test fixtures are not supplied with the unit. Select an optional probe and test fixture when ordering. Printer PRINTER 9442 (The optional onnection able 9444 and A Adapter are required to connect the Printer 9442.) Measurement values, comparator results, and BIN measurement results can be printed out on the optional Printer 9442 via the standard RS-22 interface. onvenient for applications that require printed data to be attached to inspection results. n Printer 9442 specifications Printing method: Thermal serial dot printer Paper width: 112 mm Print speed: 52.5 cps Power supply: A Adapter 944 or supplied NiMH battery (prints 000 lines after full charge using 944) imensions and weight: Approx. 160W 66.5H 170 mm (6.0 W 2.62 H 6.69 ), 580 g (20.5 oz) A AAPTER (for 9442, Japan) ONNETION ABLE 9444 (for 9442) Interface able A AAPTER (for 9442, EU) REORING PAPER 1196 (for 9442, 25 m ( ), 10 rolls) GP-IB ONNETOR ABLE m (6.56 ft) Note: ompany names and Product names appearing in this catalog are trademarks or registered trademarks of various companies. HIOKI (Shanghai) SALES & TRAING O., LT.: TEL FAX / info@hioki.com.cn ISTRIBUTE BY HEAQUARTERS: 81 Koizumi, Ueda, Nagano, , Japan TEL FAX / os-com@hioki.co.jp HIOKI USA ORPORATION: TEL FAX / hioki@hiokiusa.com HIOKI INIA PRIVATE LIMITE: TEL FAX hioki@hioki.in HIOKI SINGAPORE PTE. LT.: TEL FAX info@hioki.com.sg HIOKI KOREA O., LT.: TEL FAX info-kr@hioki.co.jp All information correct as of Aug. 29, 201. All specifications are subject to change without notice E1-8E-02N Printed in Japan
Ideal for testing taping machines and sorters. C METER C HiTESTER 3504
METER 506-10 HiTESTER 504 For Low apacitance METER 506-10 Measures at 1 khz and 1 MHz For High apacitance MLs HiTESTERs 504-60, 504-50 and 504-40 Measures at 120 Hz and 1 khz Ideal for testing taping machines
More informationIdeal for testing taping machines and sorters
METER 506-10 HiTESTER 504 For Low apacitance METER 506-10 Measures at 1 khz and 1 MHz For High apacitance MLs HiTESTERs 504-60, 504-50 and 504-40 Measures at 120 Hz and 1 khz Ideal for testing taping machines
More informationLCR METER Series. A New Series of LCR Meters to Meet Your Applications. From Production Lines to Research and Development
LCR METER Series Component measuring instruments From Production Lines to Research and Development A New Series of LCR Meters to Meet Your Applications New LCR METER Models IM3523, IM3533, and IM3533-01
More informationLCR METER Series. A New Series of LCR Meters to Meet Your Applications. From Production Lines to Research and Development
LCR METER Series Component measuring instruments From Production Lines to Research and Development A New Series of LCR Meters to Meet Your Applications New LCR METER Models IM3523, IM3533, and IM3533-01
More informationBATTERY HiTESTER BT3563, BT3562, 3561
BATTERY HiTESTER BT3563, BT3562, 3561 Simultaneous high-speed measurement of internal resistance and battery voltage From large-cell to high-voltage battery testing - HIOKI is The Choice The BT3563, BT3562,
More informationHigh-Speed Resistance Meters Optimized for Automated Systems. RESISTANCE HiTESTER RM3542, RM Measure in as little as 0.
RESISTANCE HiTESTER RM3542, RM3542-01 Component measuring instruments Measure in as little as 0.9 ms* High-Speed Resistance Meters Optimized for Automated Systems The RM3542 and RM3542-01 Resistance HiTESTERs
More informationSingle Device Solution for High Speed Testing and Frequency Sweeping IMPEDANCE ANALYZER IM3570
IMPEDANCE ANALYZER IM3570 Single Device Solution for High Speed Testing and Frequency Sweeping With this new IM3570 Impedance Analyzer, an LCR meter and an impedance analyzer capable of measurement frequencies
More informationIMPEDANCE ANALYZER IM3570
IMPEDANCE ANALYZER IM3570 Component measuring instruments Single Device Solution for High Speed Testing and Frequency Sweeping With this new IM3570 Impedance Analyzer, an LCR meter and an impedance analyzer
More information3535 LCR HiTESTER Components measuring instruments
2004 3535 LCR HiTESTER Components measuring instruments HEAD AMP UNIT http//www.hioki.co.jp/ HIOKI company overview, new products, environmental considerations and other information are available on our
More informationA New Series of LCR Meters to Meet Your Applications
Series A New Series of LCR Meters to Meet Your Applications From Production Lines to Research and Development 2 LCR Meter Series Full Product Lineup Model IM3536 IM3533 IM3523 LCR HiTESTER 3511-50 IM3533
More informationCHEMICAL IMPEDANCE ANALYZER IM3590
CHEMICAL IMPEDANCE ANALYZER IM3590 Component measuring instruments Ideal for Measuring Electrochemical Impedance Hioki s Chemical Impedance Analyzer IM3590 is designed to perform impedance (LCR) measurement
More informationSTANDBY MODE OFF MODE. POWER HiTESTER. Accurate evaluation of consumption power of electrical products. An Energy Saving Support Tool
An Energy Saving Support Tool POWER HiTESTER Power Measuring Instruments 3332 STANDBY MODE OFF MODE Single-phase, 2-wire type that can accurately measure even standby power Accurate evaluation of consumption
More informationINSULATION / WITHSTANDING Test Instrument series 3153/3159/ST5520
INSULATION / WITHSTANDING Test Instrument series 3153/3159/ST5520 3153 3159 Not CE Marked ST5520 This electrical safety test instrument series is designed for insulation resistance and voltage withstand
More informationDIGITAL HiTESTER 3237, 3238, 3239
DIGITAL HiTESTER,, 3239 4-terminal Ω function Advanced model Economically priced 3239 Outstanding performance for production lines with a sampling rate of 3.3 ms High-speed 5 1 /2 digit DMM The DIGITAL
More informationManage Electrode Reaction Resistance, Electrolyte Resistance, and Welding Resistance
BATTERY IMPEDANCE METER BT456 Manage Electrode Reaction Resistance, Electrolyte Resistance, and Welding Resistance The Ultimate Instrument for Measuring Large-Capacity Li-ion Batteries for EVs 2 Improve
More informationHigh-precision portable RESISTANCE METER
8 High-precision portable RESISTANCE METER measures from µω to MΩ Features High-precision specs in a portable package(high accuracy of 0.02% rdg.) Design is ideal for maintenance and testing/measurement
More informationINSULATION / VOLTAGE WITHSTAND TEST INSTRUMENT SERIES
2001 INSULATION / VOLTAGE WITHSTAND TEST INSTRUMENT SERIES Safety Standards Measuring Instruments 3153 3159 3158 3154 ISO14001 JQA-E-90091 http://www.hioki.co.jp/ HIOKI company overview, new products,
More informationRESISTANCE HiTESTER 3541
RESISTANCE HiTESTER 3541 Component measuring instruments 0.1 µω (20 mω range) to 110.000 MΩ Measure from very low (µω) to very high (MΩ) resistances with a single instrument Along with capabilities for
More information3239 (4-terminal Ω function) 3238 (Advanced model) 3237 (Economically priced) DIGITAL HiTESTER Field measuring instruments.
2004 3239 (4-terminal Ω function) 3238 (Advanced model) 3237 (Economically priced) DIGITAL HiTESTER Field measuring instruments Outstanding performance for production lines with a sampling rate of 3.3
More informationHigh speed Stability. DC, 4 Hz to 8 MHz. Measurement frequency LCR METER IM3536
LCR METER IM3536 DC, 4 Hz to 8 MHz Measurement frequency The new standard Introducing an LCR meter that brings exceptional specifications and cost performance to a wide range of applications, from R&D
More informationHigh-speed DMM. DIGITAL HiTESTER 3239 (4-terminal Ω function) 3238 (Advanced model) 3237 (Economically priced)
DIGITAL HiTESTER 3239 (4-terminal Ω function) 3238 (Advanced model) 3237 (Economically priced) Field measuring instruments Outstanding performance for production lines with a sampling rate of 3.3 ms High-speed
More information3541 RESISTANCE HiTESTER
3541 RESISTANCE HiTESTER Components measuring instruments 0.1 µω (20 mω range) to 110.000 MΩ Measure from very low (µω) to very high (MΩ) resistances with a single instrument Along with capabilities for
More informationINSULATION TESTER SERIES
INSULATION TESTER SERIES Field measuring instruments A Full Line-up of Insulation Testers to Suit Any Need From Basic Testing to High Performance Analysis 2 INSULATION TESTER SERIES Selection guide IR4056-20
More informationPOWER HiTESTER 3331, 3332
An Energy Saving Support Tool POWER HiTESTER 3331, 3332 Power measuring instruments 3332: Single-phase, 2-wire type that can accurately measure even standby power 3331: Single-phase, 3-wire and three-phase,
More informationLEAK CURRENT HiTESTER ST5540/ST Washington Street Melrose, MA Phone Toll Free
LEAK CURRENT HiTESTER ST5540/ST5541 Safety measuring instruments 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Leak Current Measurement
More informationFrom Production Lines to Research and Development A New Series of LCR Meters to Meet Your Applications LCR METER IM3523, IM3533
LCR METER IM52, IM5 From Production Lines to Research and Development A New Series of LCR Meters to Meet Your Applications LCR METER Models IM52, IM5, and IM5-01 are highly cost-effective testers that
More informationWorld-Class Accuracy & Measurement Range (40 Conventional Models)
AC/DC CURRENT SENSOR CT6904 Ultra-High Performance AC/DC Current Sensor World-Class Accuracy & Measurement Range (40 Conventional Models) 500 A (rms) Rated for measurement of large currents 4 MHz (±3 db)
More information99 Washington Street Melrose, MA Phone Toll Free Visit us at
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com BATTERY IMPEDANCE METER BT4560 Component measuring instruments Determine Li-ion
More informationΩ and 0.1 fa Current Resolution DIGITAL SUPER MEGOHMMETER DSM-8104, DSM Fast, Highly Accurate Measurement. DSM-8104 (Single-Channel)
DIGITAL SUPER MEGOHMMETER, DIGITAL SUPER MEGOHMMETERS (Single-Channel) (Four-Channel) Options Supporting Measurements such as Surface and Volume Resistivity Power Supply Unit Fast, Highly Accurate Measurement
More informationAn Evolution in Stable Measurements
RESISTANCE METER, An Evolution in Stable s Perfect for Taping Machines and Sorting Machines Supports Resistance s for Miniature 008004-size Electronic Parts (0.25 mm 0.125 mm) 99 Washington Street Melrose,
More informationLCR METER IM3523/IM3533/IM
LCR METER /IM3533/ Component measuring instruments From Production Lines to Research and Development A New Series of LCR Meters to Meet Your Applications New LCR METER Models, IM3533, and are highly cost-effective
More informationCATALOG including...
2002 CATALOG including... http://www.hioki.co.jp/ HIOKI company overview, new products, environmental considerations and other information are available on our website. 1 Advanced Instruments to Meet International
More information1 Model 3153 Automatic Insulation Voltage Withstand Testing Voltage Control from a PC Full Remote Control All test parameters can be controlled by RS-232C or GP-IB, including test voltage, cut-off current,
More informationAC/DC CLAMP METER CM4371, CM4373
AC/DC CLAMP METER CM4371, CM4373 Field measuring instruments CM4371 : 600 A AC/DC CM4373 : 2000 A AC/DC Speedy Performance of Professional Testing Made in Japan for rock-solid quality. Rugged clamp meters
More informationOhmmeter Replacement Guide
Ohmmeter Replacement Guide (From 3560 to RM3545) 1. Measurement 2. Functionality 3. External Control (EXT I/O) 4. Commands Please prepare copies of the user manuals for the old and new instruments and
More informationRS-232C. 3801, 3802 (High-accuracy) 3803, 3804, 3805 (Economically priced) & DIGITAL HiTESTER. Support efficient data collection.
2004 3801, 3802 (High-accuracy) 3803, 3804, 3805 (Economically priced) & DIGITAL HiTESTER Field measuring instruments Support efficient data collection RS-232C communication All HiTESTERs For Personal
More information3331, 3332 POWER HiTESTER
99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com An Energy Saving Support Tool 2002 3331, 3332 POWER HiTESTER Power measuring instruments 3332: Single-phase, 2-wire type that
More informationMEASURING INSTRUMENT. Capacitance Leakage Current / IR Meter Model IR Features.
MEASURING INSTRUMENT Capacitance Leakage Current / IR Meter Model IR 2689 Features Capacitance leakage current test function. Insulation resistance test function. Precise low current charge function (0.5mA±0.05mA).
More informationCATALOGO STRUMENTI Ricerca & Sviluppo
CATALOGO STRUMENTI Ricerca & Sviluppo MISURE PRIMARIE PONTI LCR TECNOLOGIA INDICE MISURE PRIMARIE Ponti LCR...p 3 3511/50...p 3 IM3536...p 7 IM3523 IM3533...p 23 IM3570...p 39 STRUMENTI R&S MISURE PRIMARIE
More informationAC/DC CLAMP METER CM4370 series
AC/DC CLAMP METER CM4370 series CM4371, CM4372 : 600 A AC/DC CM4373, CM4374 : 2000 A AC/DC Speedy Performance of Professional Testing Made in Japan for rock-solid quality. Rugged clamp meters for the toughest
More informationPRECISION DC VOLTMETER DM7275, DM ½ Digit. Precision DC Voltmeter. 9 ppm DC Voltmeter for R&D to Production Lines
PRECISION DC VOLTMETER DM7275, DM7276 7½ Digit Precision DC Voltmeter 9 ppm DC Voltmeter for R&D to Production Lines 2 High-Accuracy Measurement Approaching the Precision of Reference Instruments Outstanding
More informationA Full Line-up of Digital and Analog Clamp Meters to Suit Any Need
CLAMP ON HiTESTER SERIES Field measuring instruments A Full Line-up of Digital and Analog Clamp Meters to Suit Any Need From Basic Testing to High Performance Analysis 2 Selection Guide A Complete HIOKI
More informationFeaturing super-high accuracy and multi-channel capabilities (20 channels with 4-terminal measurement)
RESISTANCE METER / Component measuring instruments RESISTANCE METER Featuring super-high accuracy and multi-channel capabilities (20 channels with 4-terminal measurement) Basic accuracy : 0.006% No. of
More informationStandard models. Introducing a line of field-optimized instruments that can be chosen based on the application at hand
Featuring the world s fastest DMM engine* The DT4200 series features a dedicated IC that Hioki developed in-house in order to deliver unprecedented speed. *According to Hioki research conducted in April
More informationAC/DC CLAMP METER CM4370 series
AC/DC CLAMP METER CM4370 series CM4371, CM4372 : 600 A AC/DC CM4373, CM4374 : 2000 A AC/DC Speedy Performance of Professional Testing Made in Japan for rock-solid quality. Rugged clamp meters for the toughest
More informationHigh-accuracy bench-top meter ideal for production lines RESISTANCE METER RM3545, RM3544
RESISTANCE METER, RESISTANCE METER Featuring super-high accuracy and multi-channel capabilities (20 channels with 4-terminal measurement) Basic accuracy : 0.006% No. of display digits: Max. 6.5 Max.resolution
More informationINSULATION TESTER SERIES. Flip the Cover. A Full Line-up of Insulation Testers to Suit Any Need. From Basic Testing to High Performance Analysis
INSULATION TESTER SERIES Field measuring instruments A Full Line-up of Insulation Testers to Suit Any Need Flip the Cover From Basic Testing to High Performance Analysis 2 INSULATION TESTER SERIES Selection
More informationBattery Analyzers BA6010 Series
Data Sheet Battery Analyzers RS232 The battery analyzers measure voltage and resistance of modern battery technologies with high accuracy, resolution, and speed. Additionally, these instruments provide
More informationDigital Multimeters R6451A/6452A. R6451A/6452A Digital Multimeters. 5 1/2 Digit DMM Series Enabling Dual Input and Display
5 1/2 Digit DMM Series Enabling Dual Input and Display R6451A/6452A R6451A: General-Purpose Low-Price DMM with Standard Functions R6452A: Full-Functional DMM with Dual- Channel Input and Dual Display (Photo
More informationWide-band Models from DC to 100 MHz
CLAMP SENSOR Wide-band Models from to 1 MHz CLAMP ON PROBE 3276 1 CLAMP ON PROBE 3273-5 to 3276 Because current measurement requires the insertion of a shunt or a CT, the task often becomes difficult due
More informationDIGITAL / ANALOG HiTESTER SERIES
DIGITAL / ANALOG HiTESTER SERIES Multi Meters A Full Line-up of Digital and Analog Multimeters Suit Any Need From Basic Testing High Performance Analysis 2 POCKET SIZE DMM SERIES New product information
More informationHigh-accuracy measurement of standby to operating power
POWER METER PW3335 Power Measuring Instruments Single-Phase AC/DC Power Meter High- of standby to operating power Wide measurable range : 10 μa to 30 A, 60 mv to 1000 V Basic for voltage, current and power
More informationDIGITAL / ANALOG HiTESTER SERIES
DIGITAL / ANALOG HiTESTER SERIES Multi Meters A Full Line-up of Digital and Analog Multimeters Suit Any Need From Basic Testing High Performance Analysis 2 A Complete HIOKI Digital Multimeter Line-up Suit
More informationDB230 Capacitor Tester
DB230 Capacitor Tester Quick and accurate testing on automatic production lines THE DB 200 SERIES General The DB230 Component Tester is especially designed for high accuracy testing of capacitors on production
More information500 khz / 1 MHz Precision LCR Meter Models 894 & 895
Data Sheet 500 khz / 1 MHz Precision LCR Meter 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Industry-Leading Performance The
More information500 khz / 1 MHz Precision LCR Meter Models 894 & 895
Data Sheet 500 khz / 1 MHz Precision LCR Meter Industry-Leading Performance The 894 and 895 are high accuracy LCR meters capable of measuring inductance, capacitance, and resistance of components and materials
More informationDATA SHEET A Multimeter 5.5 Digit Dual Display, Benchtop DMM
DATA SHEET 34450A Multimeter 5.5 Digit Dual Display, Benchtop DMM Features Fast reading speed of up to 190 readings/sec 0.015% DCV accuracy Multiple connectivity options USB 2.0, Serial Interface (RS-232)
More informationRS-232C. 3801, 3802 (High-accuracy) 3803, 3804, 3805 (Economically priced) & DIGITAL HiTESTER. Support efficient data collection.
3801, 3802 (High-accuracy) 3803, 3804, 3805 (Economically priced) & DIGITAL HiTESTER Field measuring instruments 2001 Support efficient data collection RS-232C communication All HiTESTERs For Personal
More informationOhmmeter Replacement Guide
Ohmmeter Replacement Guide (From 3227 to RM3545) 1. Measurement 2. Functionality 3. External Control (EXT I/O) 4. Commands Please prepare copies of the user manuals for the old and new instruments and
More informationΩ and 0.1 fa Current Resolution DIGITAL, ULTRA-HIGH RESISTANCE/ ULTRA-LOW CURRENT METERS. Fast, Highly Accurate Measurement DSM-8104, DSM-8542
DIGITAL, ULTRA-HIGH RESISTANCE/ ULTRA-LOW CURRENT METERS, DIGITAL SUPER MEGOHMMETERS Digital, Ultra-High Resistance/ Ultra-Low Current Meters Digital, Ultra-High Resistance/ Ultra-Low Current Meters Power
More informationHigh-accuracy measurement of standby to operating power
POWER METER PW3335 Single-Phase AC/DC Power Meter High- of standby to operating power Wide measurable range : 10 μa to 30 A, 60 mv to 1000 V Basic for voltage, current and power : ±0.1%* Frequency bandwidth
More informationWide-band Models from DC to 100 MHz
CLAMP SENSOR Wide-band Models from DC to 1 MHz 3273-5 - 3276 CLAMP ON PROBES http://www.hioki.co.jp/ HIOKI company overview, new products, environmental considerations and other information are available
More informationTOS5300 SERIES Hipot Tester/Hipot Tester with Insulation Resistance Test
A new standard for Hipot & Insulation resistance testing Applied to World-Wide input voltage TOS5301 TOS5300 TOS5302 TOS5300(ACW) TOS5301(ACW/DCW) TOS5302(ACW/IR) New low-cost standard model that provides
More informationGeneral Specifications
General Specifications Model CA51/ CA71 HANDY CAL calibrator GS 77W02A01-01-E GENERAL The CA51/CA71 HANDY CAL calibrators are comprehensive generating/measuring instruments for all
More informationDC Resistance Meters 2840 Series
Data Sheet DC Meters Touch screen to zoom, select, and enter values The DC resistance meters feature high accuracy and resolution measurements in the milliohm range. Both meters are ideally suited for
More informationFluke 83V and 87V Digital Multimeters
Fluke 83V and 87V Digital Multimeters Detailed Specifications For all detailed specifications: is given as ±([% of reading] + [number of least significant digits]) at 18 C to 28 C, with relative humidity
More informationDIGITAL MULTIMETER DT4200 Series
DIGITAL MULTIMETER DT4200 Series DMM Super Fast Response Rate and Safety Features Take Professional Testing to a Higher Level High-End Models DT4281 / 4282 Standard Models DT4251 / 4252 / 4253 Pocket Models
More informationFor easy-to-use loggers, look no further! Connect to a tablet, smartphone, or PC for easy, wireless data collection
WIRELESS MINI LOGGER LR8512, LR8513, LR8514, LR8515, LR8520 For easy-to-use loggers, look no further! Connect to a tablet, smartphone, or PC for easy, wireless data collection Please see www.hioki.com
More informationWide Spectrum Power Meter for Comprehensive Device Assessment
POWER HiTESTER 3193-10 Wide Spectrum Power Meter for Comprehensive Device Assessment Printer is optional unit DC/0.5Hz to 1MHz broad-band POWER HiTESTER measures up to 6 systems simultaneously. The POWER
More informationModel 6517B Electrometer / High Resistance Meter Specifications
VOLTS Accuracy (1 Year) 1 / C 2V 10µV 0.025+4 0.003+2 20V 100µV 0.025+3 0.002+1 200V 1mV 0.06+3 0.002+1 NMRR: 2V and 20V range > 60dB, 200V range > 55dB. 50Hz or 60Hz 2 CMRR: >120dB at DC, 50Hz or 60Hz.
More informationCATALOGO STRUMENTI Ricerca & Sviluppo
CATALOGO STRUMENTI Ricerca & Sviluppo MISURE PRIMARIE OHMETRI MICROHMETRI MILLIOHMETRI SUPERMEGAOHMETRI TECNOLOGIA INDICE MISURE PRIMARIE Ohmetri Microhmetri-Milliohmetri -Supermegaohmetri...p 3 RM3543...p
More informationData sheet IDM 99III Digital Multimeter
RS Stock No. 7575116 Data sheet IDM 99III Digital Multimeter Feature: 6000 count digital display with 62 segment bar graph Extra Large scale display and white backlit AC+DC True RMS 0.08% basic DCV accuracy
More informationFast 10-ms Sampling Up to 600 Channels Data Logging. Data Logger
MEMORY HiLOGGER 8423 Data Logger Fast 10-ms Sampling Up to 600 Channels Data Logging MEMORY HiLOGGER Model 8423 is a data acquisition system capable of measuring and recording multiple channels at high
More informationCLAMP ON HiTESTER SERIES
CLAMP ON HiTESTER SERIES Field Measuring Instruments A Full Line-up of Digital and Analog Clamp Meters to Suit Any Need From Basic Testing to High Performance Analysis 2 Selection Guide A Complete HIOKI
More informationIDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: MODEL: Multimeter Service Information
IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: 61-340 MODEL: 61-342 Multimeter Service Information The Service Information provides the following information: Precautions and safety information Specifications
More informationAgilent Agilent 34405A Multimeter 5.5 Digit Dual Display, Benchtop DMM More Capabilities at a Value Price. Data Sheet
Agilent Agilent 34405A Multimeter 5.5 Digit Dual Display, Benchtop DMM More Capabilities at a Value Price Data Sheet DC CHARACTERISTICS [1] ACCURACY ± (% of reading + % of range) Temperature Cefficient
More informationAgilent 4285A Precision LCR Meter
Agilent 4285A Precision LCR Meter Data Sheet Specifications The complete Agilent Technologies 4285A specifications are listed below. These specifications are the performance standards or limits against
More informationFeaturing new judgment and ranking functionality LED OPTICAL METER TM6101. < Primary measurement application >
LED OPTICAL METER TM6101 < Measurement image > TM 6101 consists of main unit + sensor unit + PC application software. (PC is not included) < Primary measurement application > White LED/LED lighting devices
More informationA Full Line-up of Digital and Analog Clamp Meters to Suit Any Need
CLAMP ON HiTESTER SERIES Field measuring instruments A Full Line-up of Digital and Analog Clamp Meters to Suit Any Need From Basic Testing to High Performance Analysis 2 Selection Guide A Complete HIOKI
More informationA Full Line-up of Digital and Analog Clamp Meters to Suit Any Need
CLAMP ON HiTESTER SERIES Field measuring instruments A Full Line-up of Digital and Analog Clamp Meters to Suit Any Need From Basic Testing to High Performance Analysis 2 Selection Guide A Complete HIOKI
More information79/26 Series III Multimeter
79/26 Series III Multimeter Instruction Sheet W Read First: Safety Information Never use the meter if the meter or test leads look damaged. Be sure the test leads and switch are in the correct position
More information2300 REMOTE MEASUREMENT SYSTEM Data Logger
2004 2300 REMOTE MEASUREMENT SYSTEM Data Logger For quick-response handling of energy, quality, process, environmental, and fault issues Centralized Management of Multi Point Data There is a need for use
More informationHP 34401A Specifications 8
8 HP 34401A Specifications 8 DC Characteristics DC Characteristics Accuracy Specifications ± ( % of reading + % of range ) [ 1 ] Function Range [ 3 ] Test Current or Burden Voltage 24 Hour [ 2 ] 23 C ±
More informationPRECISION COMPONENT ANALYZER 6430B / 6440B
PRECISION COMPONENT ANALYZER 6430B / 6440B Product Specification Issue B USA Wayne Kerr Electronics Inc. 165L New Boston Street Woburn MA 01801-1744 Tel: 781 938 8390 Fax: 781 933 9523 email: sales@waynekerr.com
More informationDVM645BI BENCH MULTIMETER TAFELMULTIMETER MULTIMETRE DE TABLE BANCO MULTÍMETRO TISCHMULTIMETER. User Manual. Gebruikershandleiding
BENCH MULTIMETER TAFELMULTIMETER MULTIMETRE DE TABLE BANCO MULTÍMETRO TISCHMULTIMETER User Manual Gebruikershandleiding Manuel d'utilisation Gebrauchsanleitung Introduction BENCH MULTIMETER This manual
More informationDIGITAL MULTIMETERS 7561 & & 7562 Digital Multimeters FEATURES RECORDERS INDEX
756 & 7562 756 & 7562 Digital Multimeters 756 (6-/2 digits) 23 88 330 mm 3 kg (8-3/8 3-/2 3" 6.6 lbs) 7562 (6-/2 digits) 23 88 330 mm 3 kg (8-3/8 3-/2 3" 6.6 lbs) The 7560 (6-/2 digit display) Series is
More informationENGLISH. Datasheet Stock No RS PRO IDM 99III Digital Multimeter. Feature: 6000 count digital display with 62 segment bar graph
ENGLISH Datasheet Stock No. 123-3249 RS PRO IDM 99III Digital Multimeter Feature: 6000 count digital display with 62 segment bar graph Extra Large scale display and white backlit AC+DC True RMS 0.08% basic
More informationI PM. Current Transducer ITZ 5000-SB FLEX ULTRASTAB = 5000 A
urrent Transducer ITZ 5000-SB FLEX ULTRASTAB I PM = 5000 A For ultra-high precision measurement of current: D, A, pulsed..., with galvanic separation between primary and secondary. Separate magnetic head
More informationFast 10-ms Sampling Up to 600 Channels Data Logging. MEMORY HiLOGGER 8423
MEMORY HiLOGGER 8423 Fast 10-ms Sampling Up to 600 Channels Data Logging MEMORY HiLOGGER Model 8423 is a data acquisition system capable of measuring and recording multiple channels at high speed. Acquired
More informationAgilent E4981A Capacitance Meter 120 Hz/ 1 khz/ 1 MHz. Data Sheet
Agilent E4981A Capacitance Meter 120 Hz/ 1 khz/ 1 MHz Data Sheet Definitions This document provides specifications and supplemental information for the Agilent E4981A 120 Hz / 1 khz / 1 MHz capacitance
More informationDIGITAL THERMOMETER Digital Thermometer FEATURES INDEX RECORDERS
Digital Thermometer 23 88 350 mm 3 kg (8-5/8 3-/2 3-3/4" 6.6 lbs) The Digital Thermometer has 6 ranges of temperature sensors and measuring functions of DC V and Ω. YOKOGAWA-original A/D converter (feedback
More informationAPPA 300 Series. The Most User-Friendly High Performance Multimeter
APPA 300 Series The Most User-Friendly High Performance Multimeter Throw Away the Manual... So Easy, So Simple Straight Forward... For basic application, simply to operate these keys... "LIGHT" "BAR" "DIGIT"
More informationResistance Meters for Production Lines and MRO. Easy to use with high-accuracy RESISTANCE METER RM3544, RM3548
RESISTANCE METER RM3544, RM3548 Easy to use with high-accuracy Resistance Meters for Production Lines and MRO The Resistance Meters RM3544/RM3544-01/RM3548 can measure the winding resistance of devices
More informationTest Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.com DIGITAL SUPER MEGOHMMETER DSM-8104, DSM-8542
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com DIGITAL SUPER MEGOHMMETER, DIGITAL SUPER MEGOHMMETERS (Single-Channel) (Four-Channel) Options Supporting
More informationData sheet IDM 98III Digital Multimeter
RS Stock No. 7575110 Data sheet IDM 98III Digital Multimeter FEATURE: 6000 count digital display with 62 segment bar graph Extra Large scale display and white backlit AC+DC True RMS 0.1% basic DCV accuracy
More informationFluke 8845A/8846A Digital Multimeters Extended Specifications
Fluke 8845A/8846A Digital Multimeters Extended Specifications The Fluke 8845A and 8846A 6.5 digit precision multimeters have the precision and versatility to handle your most demanding measurements, on
More information8588A Reference Multimeter
8588A Reference Multimeter Product Specifications March 2019 Rev. A 2019 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of
More informationDIGITAL STORAGE OSCILLOSCOPES
99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com DIGITAL STORAGE OSCILLOSCOPES Digital Storage Oscilloscope 100MS/s Acquisition (40MS/s 2 Acquisition) 100MHz 2 channel. OUTLINE
More informationAgilent 34405A Multimeter 5.5 Digit Dual Display, Benchtop DMM More Capabilities at a Value Price
Agilent 34405A Multimeter 5.5 Digit Dual Display, Benchtop DMM More Capabilities at a Value Price Data Sheet Features 120000 counts resolution 16 built-in measurement functions including temperature and
More informationU1730C Series Handheld LCR Meters
DATA SHEET Take your expectations higher with the latest LCR meters U1730C Series Handheld LCR Meters The Keysight Technologies, Inc. U1730C Series handheld LCR meters allow you to measure at frequencies
More information