AFC Series. 0.5kVA to 2000kVA. Manual AC Power Source THE POWER TEST EXPERTS.

Transcription

1 AFC Series 0.5kVA to 2000kVA Manual AC Power Source THE POWER TEST EXPERTS

2 AFC Series 0.5kVA to 2000kVA Product Overview The is a complete line of single and three phase AC power sources. With Power levels ranging from 500VA up to 2MVA, the AFC series are ideal cost effective solutions for precise voltage and frequency conversion. Power is supplied by state-of-the-art IBGT pulsewidth-modulated power amplifiers resulting in highly efficient power conversion, compact design and maximized performance pictured above. See product specification tables for other options and sizes. is adjustable up to 300VL-N (519VL-L) and 47-63Hz. Three sets of user pre-determined memory allows for convenient, on the fly manual programming. Up to 90% efficient the AFC minimizes heat dissipation so less infrastructure cooling is required. Featured Benefits Precision frequency and load regulation Robust design and ability to service reduces downtime Compact design that minimizes floor space requirements Low output distortion Integrated high accuracy measurements Single phase output up to 800kVA Why choose AFC? and frequency conversion is traditionally accomplished using low cost rotor frequency converters and motor generators. While the initial cost for these types of conversion technology is lower, they require regular maintenance and upfront infrastructure investment. This traditional technology is also slow to regulate fluctuating loads and generates high harmonic distortion. Utilizing modern engineering design the AFC offers a cost effective replacement to these traditional technologies and the benefits of modern switch mode power technology. 2

3 Options EMI Options EMI Filter Remote Options RS485 Remote Control for & (No Measurements) External Remote Control Webcomm Ethernet Connection Preen Interface RS232 communication port for remote control of output voltage and frequency. Please note standard measurements are not available via remote communication. Supplemental Specifications Constant Power Mode (CMP) maximizes output power at typical operating voltages. As output voltage is reduced from full scale the available output current automatically increases to as much as 125%. Please note this chart details performance against guaranteed specifications. Below 50% of full scale voltage the source delivers full current and some specifications may not be met. Performance degradation such as load regulation and THD at <2% (over 2kva) of full scale voltage could be slightly higher. For questions regarding performance, please contact us for further clarification. CPM Constant Power Mode (RMS) Full Power (RMS) 3

4 Supplemental Specifications (cont.) Please ensure sizing the AC source appropriately for higher frequency output. For regarding performance please contact us for further clarification. Power De-Rating as Function of Power (Hz) Best-in-Class AFC solutions are easily serviced by Intepro Systems, LP, an ISO 9001 certified company. Intepro prides itself on best-in-class service support by minimizing the pains associated with system failure and maximizing uptime of our products. In the unfortunate and rare event of failure, the standard one year warranty includes ON-SITE repair for sources 15kVA and greater. Returning high power products back to the factory is expensive, impacts development schedules and furthers risk associated with lengthy transit times. Extended service level agreements and yearly calibrations are available for up to five years. 4

5 Single In - Single Out (0.5~30kVA) Model 11500W Capacity (kva) Circuit Type Transistor Amplifier IGBT/PWM type Input System Measurements Environmental 110V,120V,220V OR 277V 110V,120V,220, 277V±15% Single Sine V/208V, 220V/380V, OR 277V/ V±15%, 220V±15%, or 277V±15% 50Hz±3Hz or 60Hz±3Hz Power 0.85 Regulation Max (A) Per Single Sine Low 0~150V (L-N) 5V~150V (L-N) High 0~300V (L-N) 10V~300V (L-N) Low V High V 47~63Hz, 50Hz, 60Hz; 2F, 4F, 400Hz (Option) 0.01% Line Regulation 0.5% <1% Load Regulation ±0.5% <±1% (linear load) Total Harmonic Distortion (THD) 0.5% <2% (linear load) Efficiency 70% 90% Response Time 50 µ s 50ms Crest Factor 1.4 : 1 3 : 1 Protection Device Display Same as plus output no fuse breaker Input no fuse breaker, electronic circuit instant trip for over/low voltage, over current, over load, overtemperature, and short circuit protection and alarm system Resolution 0.1V Display : 0~600V, resolution 0.1V, accuracy: 0.15%FS+4Count 0.001A 0.01A Power 0.1W 1W LED Display : 0~700A, resolution 0.01A (<100A) / 0.1A ( 100A), accuracy: 0.15%FS+4Count Display : 3kW~75kW, resolution 0.01kW (<10kW) / 0.1kW ( 10kW), accuracy: 0.3%FS+4Count Resolution 0.1Hz Display : 0~999.9Hz, resolution 0.1Hz, accuracy: 0.1% Insulation Equipment Withstand Insulation Cooling System DC500V 10MΩ AC 1800V 10mA/1 Min Fan Cooling Temperature 0 C ~ 45 C Humidity Altitude 0 ~ 90% (Non-condensing) Case No. (see page 7 for sizes) Weight (lb/kg) 97/44 195/89 150/68 160/73 195/89 440/ / / / / m 5

6 Three In Single Out ( kVA) Model Power (kva) Circuit Type Input System Measurements Environmental IGBT/PWM Three Sine 120V/208V, 220V/380V, OR 277V/480V 120V/208V±15%, 220V/380V±15%, or 277V/480V±15% 50Hz±3Hz or 60Hz±3Hz Power Factor 0.80 Low High Regulation Max Low V High V Single Sine 5V~150V (L-N) 10V~300V (L-N) 47~63Hz, 50Hz, 60Hz; 2F, 4F, 400Hz (Option) 0.01% Line Regulation <2% Load Regulation Total Harmonic Distortion (THD) ±1% (linear load) 3% (linear load) Efficiency 85% Response Time Crest Factor 3:1 Protection Device Display Insulation Resistance Insulation Cooling System 2ms Electronic circuit trip for over/low voltage, over current, over load, over temperature, and short circuit protection and alarm system LED Display : 0~600V, resolution 0.1V, accuracy: 0.2%FS+1Count Display : 0~9999A, resolution 0.01A (<100A) / 0.1A ( 100A), accuracy: 0.2%FS+1Count Display : 40~600Hz, resolution 0.1Hz (<100Hz) / 0.1Hz ( 100Hz), accuracy: ±0.02% / 0.2Hz DC500V 10MΩ AC 1800V 10mA/1 Min Fan Cooling, Front to Rear Temperature 0 C ~ 45 C Humidity Altitude 0 ~ 90% (Non-condensing) 1500m Case No. 6 7 Weight (lb/kg) 1980/ / /1350 Consult factory for power levels above 800kVA 6

7 Three In - Single Out (10~75kVA) Model Capacity Circuit Type Input System Measurements Environmental IGBT/PWM type Three Sine 120V/208V, 220V/380V, OR 277V/480V 120V/208V±15%, 220V/380V±15%, or 277V/480V±15% 50Hz±3Hz or 60Hz±3Hz Power Factor 0.85 Low High Single Sine 5V~150V (L-N) 10V~300V (L-N) 47~63Hz, 50Hz, 60Hz; 2F, 4F, 400Hz (Option) Regulation 0.01% Max (A) Per Low V High V Line Regulation <1% Load Regulation Total Harmonic Distortion (THD) <±1% (linear load) <2% (linear load) Efficiency 90% Response Time 50ms Crest Factor 3 : 1 Protection Device Display Power Input no fuse breaker, electronic circuit instant trip for over/low voltage, over current, over load, over temperature, and short circuit protection and alarm system LED Display : 0~600V, resolution 0.1V, accuracy: 0.15%FS+4Count Display : 0~700A, resolution 0.01A (<100A) / 0.1A ( 100A), accuracy: 0.15%FS+4Count Display : 3kW~75kW, resolution 0.01kW (<10kW) / 0.1kW ( 10kW), accuracy: 0.3%FS+4Count Display : 0~999.9Hz, resolution 0.1Hz, accuracy: 0.1% Insulation Resistance Withstand Insulation Cooling System DC500V 10MΩ AC 1800V 10mA/1 Min Fan Cooling Temperature 0 C ~ 45 C Humidity Altitude 0 ~ 90% (Non-condensing) 1500m Case No. (see page 7 for sizes) Weight (lb/kg) 460/ / / / / / /670 7

8 Three In Three Out (6-75kVA) Model Power (kva) Circuit Type Input System Measurements Environmental IGBT/PWM type Three phase Sine 120V/208V, 220V/380V, OR 277V/480V 120V/208V±15%, 220V/380V±15%, or 277V/480V±15% 50Hz±3Hz or 60Hz±3Hz Power Factor 0.9 Regulation Max (A) Per Low High Low V High V Three phase Sine 5V~150V (L-N) 10V~300V (L-N) 47~63Hz, 50Hz, 60Hz; 2F, 4F, 400Hz (Option) 0.01% Line Regulation <1% Load Regulation Total Harmonic Distortion (THD) ±1% (linear load) 2% (linear load) Efficiency 90% Response Time 2ms Crest Factor 3 : 1 Protection Device Display Power Electronic circuit trip for over/low voltage, over current, over load, over temperature, and short circuit protection and alarm system LED Display : 0~600V, resolution 0.1V, accuracy: 0.15%FS+4Count Display : 0~700A, resolution 0.01A (<100A) / 0.1A ( 100A), accuracy: 0.2%FS+4Count Display : 3kW~75kW, resolution 0.01kW (<10kW) / 0.1kW ( 10kW), accuracy: 0.3%FS+4Count Display : 0~999.9Hz, resolution 0.1Hz, accuracy: 0.1% Insulation Resistance Insulation Cooling System DC500V 10MΩ AC 1800V 10mA/1 Min Fan Cooling, Front to Rear Temperature 0 C ~ 45 C Humidity Altitude 0 ~ 90% (Non-condensing) 1500m Case No. (see page 7 for sizes) Weight (lb/kg) 440/ / / / / / / /670 Consult factory for power levels above 800kVA 8

9 Three In Three Out ( kVA) Model Power (kva) Circuit Type Input System Measurements Environmental IGBT/PWM type Three phase Sine V/208V, 220V/380V, OR 277V/480V V/208V±15%, 220V/380V±15%, or 277V/480V±15% 50Hz±3Hz or 60Hz±3Hz Power Factor 0.85 Regulation Max (A) Per Low High Low V High V Three phase Sine 5V~150V (L-N) 10V~300V (L-N) 47~63Hz, 50Hz, 60Hz; 2F, 4F, 400Hz (Option) 0.01% Line Regulation <2% Load Regulation Total Harmonic Distortion (THD) ±1% (linear load) 3% (linear load) Efficiency 85% Response Time 2ms Crest Factor 3 : 1 Protection Device Display Insulation Resistance Insulation Cooling System Electronic circuit trip for over/low voltage, over current, over load, over temperature, and short circuit protection and alarm system LED Display : 0~600V, resolution 0.1V, accuracy: 0.2%FS+1Count Display : 0~9999A, resolution 0.01A (<100A) / 0.1A ( 100A), accuracy: 0.2%FS+1Count Display : 40~600Hz, resolution 0.1Hz (<100Hz) / 0.1Hz ( 100Hz), accuracy: ±0.02% / 0.2Hz DC500V 10MΩ AC 1800V 10mA/1 Min Fan Cooling, Front to Rear Temperature 0 C ~ 45 C Humidity Altitude 0 ~ 90% (Non-condensing) 1500m Case No. (see page 7 for sizes) Weight (lb/kg) 1880/ / / / / / 2741 Consult factory for power levels above 800kVA 6700/ / / / /

10 Case Dimensions (width x depth x height) 1 17 x 21 x 8 (in) / 430 x 520 x 200 (mm) 6 42 x 38 x 71 (in) / 1050 x 970 x 1800 (mm) 2 17 x 21 x 28 (in) / 430 x 520 x 720 (mm) 7 46 x 49 x 75 (in) / 1150 x 1240 x 1900 (mm) 3 24 x 34 x 38 (in) / 600 x 850 x 945 (mm) 8 88 x 49 x 79 (in) / 2240 x 1280 x 2000 (mm) 4 24 x 34 x 53 (in) / 600 x 850 x 1340 (mm) x 49 x 87 (in) / 3450 x 1240 x 2200 (mm) 5 32 x 34 x 61 (in) / 800 x 860 x 1545 (mm) Input 100V 110V 115V 120V 200V 208V 220V 230V 240V 380V 400V 415V 440V 480V 1Ø2W+G 1Ø2W+G or 3Ø3W+G ( -Connection) 3Ø3W+G ( -Connection) 110/190 V 115/200 V 120/208 V 127/220 V 220/380 V 230/400 V 240/415 V 254/440 V 100/200 V 110/220 V 115/230 V Consult Intepro System for other Input s 3Ø4W+G or 3Ø4W+N+G (Y-Connection) 1Ø3W+G Contact Us United States Intepro Systems America, LP A Franklin Ave Tustin, CA Tel: sales@inteproate.com United Kingdom Intepro UK Ltd. 9 Lakeside Business Park Swan Lane, Sandhurst Berkshire GU47 9DN / UK Tel: China Intepro Power Electronics (Shenzhen) Co., Ltd No. 828, Block 7, Fourth Industrial Area Nanyou, Nashan District Shenzhen, China Tel: