Akatherm PE drainage complies with EN1519 and has water mark certification for AS/NZS 4401 and AS/NZS A mm x 5m 3. A mm x 5m 3
|
|
- Kathlyn Lamb
- 5 years ago
- Views:
Transcription
1 AKATHERM HDPE DRAINAGE JULY 2016
2 PE DRAINAGE The Akatherm HDPE system has a full range which includes pipes, bends, junctions, reducers, traps and electrofusion couplers. Akatherm HDPE has high temperature and chemical resistance which makes it ideal for drainage in, apartments and commercial buildings through to industrial use. It is flexible and tough and can be installed underground and embedded in concrete. It is a closed system which makes it ideal for many trade waste applications like industrial and laboratory fluids where system integrity and secure connections are critical. Akatherm PE drainage complies with EN1519 and has water mark certification for AS/NZS 4401 and AS/NZS 5065 Marley also supplies Akasison siphonic and Akavent high rise PE systems so please contact us for further information on these specialist systems. Item Number Wall Thickness (mm) PE DRAINAGE PIPE 5 METRES A mm x 5m 3 A x 5m 3 A mm x 5m 3 A x 5m 3 A x 5m 3 A x 5m 3.5 A x 5m 4.2 A x 5m 4.8 A x 5m 6.2 A x 5m 7.7 A x 5m 9.6 A mm x 5m 12.1 PE DRAINAGE BEND 45 A A mm A mm A A A A A A A A A mm 2
3 PE DRAINAGE BEND 88 A mm A A A A A A A A A A A mm 2 315mm REDUCER ECCENTRIC A A A A REDUCER /40mm REDUCER 56mm/40mm REDUCER 56mm/ REDUCER /40mm A REDUCER / A A A A A A A A A A REDUCER /56mm REDUCER /40mm REDUCER / REDUCER / REDUCER /56mm REDUCER /40mm REDUCER / REDUCER /56mm REDUCER / REDUCER / A REDUCER /40mm A REDUCER / A REDUCER /56mm A REDUCER / A REDUCER / A REDUCER / A REDUCER / A A A A REDUCER /56mm REDUCER / REDUCER / REDUCER / 3
4 REDUCER ECCENTRIC LONG A REDUCER / A REDUCER / A REDUCER / A REDUCER / A A A A REDUCER / REDUCER 2/ REDUCER 315mm/ REDUCER 315mm/2 CLEANOUT BRANCH 90 A A A A A A A A CLEANOUT BRANCH 40mm CLEANOUT BRANCH CLEANOUT BRANCH CLEANOUT BRANCH CLEANOUT BRANCH / CLEANOUT BRANCH / CLEANOUT BRANCH / CLEANOUT BRANCH 2/ JUNCTIONS 88.5 A A A JUNCTION 40mm JUNCTION JUNCTION /56mm JUNCTIONS 45 A A A A A A A A A A A A JUNCTION 40mm JUNCTION /40mm JUNCTION JUNCTION 56mm/40mm JUNCTION 56mm/ JUNCTION 56mm JUNCTION /40mm JUNCTION / JUNCTION /56mm JUNCTION JUNCTION /40mm JUNCTION / 4
5 JUNCTIONS 45 CONTINUED A A A A A A A A A A A A A A A A A A A A A A A A A JUNCTION / JUNCTION JUNCTION /56mm JUNCTION /40mm JUNCTION / JUNCTION / JUNCTION / JUNCTION JUNCTION /56mm JUNCTION /40mm JUNCTION / JUNCTION / JUNCTION / JUNCTION JUNCTION /56mm JUNCTION /40mm JUNCTION / JUNCTION /56mm JUNCTION / JUNCTION / JUNCTION / JUNCTION / JUNCTION JUNCTION / JUNCTION / A JUNCTION / A A A A A A A A A A A JUNCTION / JUNCTION / JUNCTION / JUNCTION JUNCTION / JUNCTION / JUNCTION / JUNCTION / JUNCTION / JUNCTION / JUNCTION 5
6 PE DRAINAGE EXPANSION SOCKET A A A A A A A A A A A A mm 56mm 2 315mm PE DRAINAGE ELECTROFUSION COUPLER A mm A A A A A A A A A A A mm 2 315mm INSPECTION CAP AND BASE A A A END CAP ( BUTT WELD ) A A A A mm 56mm 6
7 END CAP ( BUTT WELD ) CONTINUED A A A A A A A A mm TRAP A S TRAP 40mm A S TRAP 4 FOLD BOSS JUNCTION 88.5 A / ACCESSORIES A A A A A AKAFUSION WELDER CB160 (40-) AKAFUSION WELDER CB315-U (40-315mm) CB315-U YELLOW OUTPUT LEADS 40- CB315-U BLUE OUTPUT LEADS mm CB315-U BLUE OUTPUT LEADS mm 7
8 WORKING WITH MARLEY FOR A BETTER TOMORROW DISCLAIMER This PE Drainage price list has been compiled by Marley New Zealand Limited ( The Company ) and is supplied subject to acknowledgment of the following conditions: The PE Drainage price list is protected by Copyright and may not be copied or reproduced in any form or by any means in whole or in part without prior consent in writing by the Company. Prices are subject to change, product specifications, usage data and advisory information may also change from time to time with advances in research and field experience. Industry standards are also subject to change, at the time of printing all products featured in this publication adhere to the relevant New Zealand standards where applicable. The Company reserves the right to make such changes to price or product information at any time without notice. Correct usage of the Company s products involve engineering judgements which cannot be properly made without full knowledge of all the conditions pertaining to each specific installation. The Company expressly disclaims all and any liability to any person whether supplied with this publication or not in respect of anything and of the consequences of anything done or omitted to be done by any such person in reliance whether whole or partial upon the whole or any part of the contents of this publication. No offer to trade, nor any conditions of trading, are expressed or implied by the issue or content of this manual. Nothing herein shall override the Company s Conditions of Sale, which may be obtained from the Registered Office or any Sales Office of the Company. This PE Drainage price list is and shall remain the property of the Company, and shall be surrendered on demand to the Company. AUCKLAND - Mahia Road, Manurewa, Private Bag 802, Manurewa. Sales Department Tel: Direct Fax: Freefax: Head Office Tel: Fax: CONTACT CENTRE: CHRISTCHURCH Shands Road, Hornby, PO Box Christchurch. CONTACT CENTRE: MAR2375 July 2016 For more information: FREEPHONE 0800 MARLEY ( )
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11413 Second edition 2008-12-15 Plastics pipes and fittings Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting Tubes et raccords
More informationREGISTRATION EXAMINATION, JUNE 2008 DRAINLAYING ANSWER SCHEDULE
No. 9197 REGISTRATION EXAMINATION, JUNE 2008 DRAINLAYING ANSWER SCHEDULE Plumbers, Gasfitters and Drainlayers oard, 2008. All rights reserved. No part of this publication may be reproduced by any means
More informationCast Copper Alloy Solder Joint Drainage Fittings: DWV
ASME B16.23-2011 [Revision of ASME B16.23-2002 (R2006)] Cast Copper Alloy Solder Joint Drainage Fittings: DWV AN AMERICAN NATIONAL STANDARD ASME B16.23-2011 [Revision of ASME B16.23-2002 (R2006)] Cast
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13953 First edition 2001-09-15 Polyethylene (PE) pipes and fittings Determination of the tensile strength and failure mode of test pieces from a butt-fused joint Tubes et raccords
More informationRecommended Practice for Wet and Dry Thermal Insulation of Subsea Flowlines and Equipment API RECOMMENDED PRACTICE 17U FIRST EDITION, FEBRUARY 2015
Recommended Practice for Wet and Dry Thermal Insulation of Subsea Flowlines and Equipment API RECOMMENDED PRACTICE 17U FIRST EDITION, FEBRUARY 2015 Special Notes API publications necessarily address problems
More informationPRACTICAL UNDERSTANDING AND INTERPRETATION OF TECHNICAL STANDARD TS30a WELDING SPECIFICATION
TG 61 SOUTH AUSTRALIAN WATER CORPORATION TECHNICAL GUIDELINE PRACTICAL UNDERSTANDING AND INTERPRETATION OF TECHNICAL STANDARD TS30a WELDING SPECIFICATION WELDING & WELDING PROCEDURE QUALIFICATION Issued
More informationShell-and-Tube Heat Exchangers API STANDARD 660 NINTH EDITION, MARCH 2015
Shell-and-Tube Heat Exchangers API STANDARD 660 NINTH EDITION, MARCH 2015 Special Notes API publications necessarily address problems of a general nature. With respect to particular circumstances, local,
More informationSOCKET & NIPPLE. Quality products for a quality environment BSP THREADED FITTINGS - PP. Code K12. Socket - equal Injection moulded.
BSP THREADED FITTINGS - PP SOCKET & NIPPLE Code K12 Socket - equal 1/2 to 3 Material: PP black Socket - reduced 1/2 up to 4 in various increments Material: PP black Nipple - equal 1/2 to 4 Material: PP
More informationAustralian/New Zealand Standard
AS/NZS 4677:2010 AS/NZS 4677:2010 Australian/New Zealand Standard Steel utility services poles AS/NZS 4677:2010 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee CE-019,
More informationEffective Date: August 2016 Void After: August Product: Sewer Pipe & Fittings (PVC) File No. 1367
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationVinidexair THE BLUE AIR PRESSURE PIPING SYSTEM
Vinidexair THE BLUE AIR PRESSURE PIPING SYSTEM Vinidexair - the blue air pressure piping system Compressed air should be handled with respect. Now there is a poly pipe designed specifically to handle compressed
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11296-4 First edition 2009-11-01 Corrected version 2010-06-01 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Part 4: Lining
More information30 Bending Brake. Model Assembly and Operating Instructions. Distributed exclusively by Harbor Freight Tools.
30 Bending Brake Model 41311 Assembly and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Copyright 1999 by Harbor Freight Tools. All
More informationPRODUCT CATALOGUE. Major Features: Arc Bends Manufactured to: Pipestar now offering full-line of flanged Arcbends
PRODUCT CATALOGUE Pipestar now offering full-line of flanged Arcbends Pipestar offers a range of seamless long radius Arc HDPE sweep bends made to the highest quality standards. Pipestar offers a range
More informationInstallation BT Coupler
Installation instructions for Ancon BT Coupler Ancon BT Couplers are designed to join two reinforcing bars of the same size. They can be assembled in the same concrete pour using Types A, B & C systems
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 28721-1 First edition 2008-12-01 Vitreous and porcelain enamels Glass-lined apparatus for process plants Part 1: Quality requirements for apparatus, components, appliances and
More informationDYNEX SOFFIT SYSTEM. Product. Scope. Building Regulations. Appraisal No. 908 [2016] Appraisal No. 908 (2016) BRANZ Appraisals
DYNEX SOFFIT SYSTEM BRANZ Appraisals Technical Assessments of products for building and construction. Dynex Extrusions Limited PO Box 19-133 Avondale Auckland Tel: 09 828 2800 Fax: 09 828 2801 Web: www.dynex.co.nz
More informationPROTECTO SILL WINDOW SEALING SYSTEM. Product. Scope. Appraisal No. 444 [2017]
PROTECTO SILL WINDOW SEALING SYSTEM This Appraisal replaces BRANZ Appraisal No. 444 (2011) BRANZ Appraisals Technical Assessments of products for building and construction. Marshall Innovations Limited
More informationSeTTINg a new standard
0 u r Q U A L I T Y c o m e s T H r o u g h SCRE ENS SeTTINg a new standard for screen quality. There are two key aspects that make Delta Screens unique manufacturing expertise and experience. These create
More informationMaxLite LED Self-Driven LiteBars
Accessories Length: 4, 12, 40 Connector Box Straight Joiner Wire Joiner Mounting Clip Distribution Box Left Joiner Wire Joiner with Plug length: 40 Magnet Bracket Right Joiner End Cap Rotation Bracket
More information(R) Aerospace First Article Inspection Requirement FOREWORD
AEROSPACE STANDARD AS9102 Technically equivalent to AECMA pren 9102 Issued 2000-08 Revised 2004-01 REV. A Supersedes AS9012 (R) Aerospace First Article Inspection Requirement FOREWORD In December 1998,
More informationInstallation Guide. for Ampelite Industrial Sheeting STD. Premium Industrial Sheeting. Industrial Grade Fibreglass. Industrial Grade Fibreglass
Installation Guide for Ampelite Industrial Sheeting Premium Industrial Sheeting STD Industrial Grade Fibreglass Industrial Grade Fibreglass Industrial Grade Fibreglass AS/NZS ISO 9002 Licence QEC 4787
More informationTRADE SILL FLASHING TAPE. Product. Scope. Appraisal No. 712 [2012] Appraisal No. 712 (2012) Amended 19 July BRANZ Appraisals
TRADE SILL FLASHING TAPE Amended 19 July 2017 BRANZ Appraisals Technical Assessments of products for building and construction. Marshall Innovations Limited PO Box 9411 Greerton Tauranga Tel: 07 543 0948
More information9 QUICK RELEASE WOODWORKING VISE
9 QUICK RELEASE WOODWORKING VISE 94386 OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 349 Mission Oaks Blvd., Camarillo, CA
More informationROOF FRAMING INFORMATION BATTEN INSTALLATION CORONA SHAKE INSTALLATION ACCESSORY INSTALLATION ESTIMATING DATA GENERAL INFORMATION
ROOF FRAMING INFORMATION BATTEN INSTALLATION CORONA SHAKE INSTALLATION ACCESSORY INSTALLATION ESTIMATING DATA GENERAL INFORMATION ROOF FRAMING INFORMATION It is the responsibility or roofers, building
More informationTHE GOOD GUIDE TO ELECTROFUSION JOINTING....Connect
THE GOOD GUIDE TO ELECTROFUSION JOINTING...Connect THE GOOD GUIDE TO ELECTROFUSION JOINTING This guide will provide basic information to enable the operative to: Equipment required: Understand the principles
More informationStatus Date Prepared Reviewed Endorsed Approved
Discipline Engineering Standard NSW Category Services Title Compilation of Historical Records of Buildings Scheduled for Demolition Reference Number EYP 01 (RIC Standard: G 2650) Document Control Status
More informationThe ACT External HEPA Push-Through Filter Assembly. A. A. Frigo, S. G. Wiedmeyer, D. E. Preuss, E. F. Bielick, and R. F. Malecha
by A. A. Frigo, S. G. Wiedmeyer, D. E. Preuss, E. F. Bielick, and R. F. Malecha Argonne National Laboratory Chemical Technology Division 9700 South Cass Avenue Argonne, Illinois 60439 Telephone: (630)
More informationGlulam Connection Details
T E C H N I C A L N O T E Glulam Connection Details Note: This version is superseded by a more current edition. Check the current edition for updated design and application recommendations. ENGINEERED
More informationINNOVATION IN ACTION. HEAD OFFICE Warrego Highway Dalby QLD BRISBANE OFFICE 60 Kingsford Smith Drive Albion QLD 4010
HEAD OFFICE 18138 Warrego Highway Dalby QLD 4405 BRISBANE OFFICE 60 Kingsford Smith Drive Albion QLD 4010 PERTH OFFICE Ground Floor Suite 2 35 Great Eastern Highway Rivervale WA 6103 Tel 07 4669 7451 Fax
More informationISO INTERNATIONAL STANDARD. Non-destructive testing of welds Radiographic testing of fusionwelded
INTERNATIONAL STANDARD ISO 17636 First edition 2003-09-15 Non-destructive testing of welds Radiographic testing of fusionwelded joints Contrôle non destructif des assemblages soudés Contrôle par radiographie
More informationAssembly Instructions
Thank You For Purchasing The Best Overhead Storage Rack Assembly Instructions Overhead Storage Rack 8 x 4 8 x 3 8 x 2 6 x 4 6 x 3 6 x 2 4 x 4 Two 8 x4 Racks Pictured P.O. Box 714, El Cerrito, CA 94530
More informationISO INTERNATIONAL STANDARD. Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers
INTERNATIONAL STANDARD ISO 16812 Second edition 2007-02-15 Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers Industries du pétrole, de la pétrochimie et du gaz naturel
More informationFRIATOOLS. Operating instructions Scraper tool FWSG 315. Update:
FRIATOOLS EN Operating instructions Scraper tool FWSG 315 1 1 3 6 5 7 8 4 2 1. Roller handle 2. Scraper blade 3. Housing 4. Clamping carriage 5. Twist grip knob 6. Guide rollers 7. Blade housing 8. Blade
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15407-2 First edition 2003-04-15 Pneumatic fluid power Five-port directional control valves, sizes 18 mm and 26 mm Part 2: Mounting interface surfaces with optional electrical
More informationCOMPLETE REVISION October Process Industry Practices Piping. PIP PNFJ8000 Jacketed Piping Fabrication and Installation Details
COMPLETE REVISION October 2007 Process Industry Practices Piping PIP PNFJ8000 Jacketed Piping Fabrication and Installation Details PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
More informationISO INTERNATIONAL STANDARD. Hexalobular internal driving feature for bolts and screws. Empreinte à six lobes internes pour vis
INTERNATIONAL STANDARD ISO 10664 Second edition 2005-07-01 Hexalobular internal driving feature for bolts and screws Empreinte à six lobes internes pour vis Reference number ISO 10664:2005(E) ISO 2005
More informationConsideration of External Pressure in the Design and Pressure Rating of Subsea Equipment API TECHNICAL REPORT 17TR12 FIRST EDITION, MARCH 2015
Consideration of External Pressure in the Design and Pressure Rating of Subsea Equipment API TECHNICAL REPORT 17TR12 FIRST EDITION, MARCH 2015 Special Notes API publications necessarily address problems
More information2D Laser Cutting. Rotary Laser Cutting. Folding and Bending. Fabrication. Mig & Tig Welding. Complete Project Management
2D Laser Cutting Rotary Laser Cutting Folding and Bending Fabrication Mig & Tig Welding Complete Project Management Laser Marking & Rotary Laser Marking Delivery Service About Us New Touch Industries is
More informationLC6X4WTM Security Wall Mount with Tilt for up to 60" Flat Screens with VESA 600mm x 400mm or less
Page 1 of 6 The LC6X4WTM Security Wall Mount with Tilt is designed to secure a flat screen, up to a 60", to the wall while still allowing the monitor to tilt. The VESA mounting patterns on the front of
More informationAWADUCT FLEX-CONNECT PIPE COUPLER
Simply flexible when connecting sewer pipes www.rehau.com Subject to technical modifications Valid from June 2016 THE PIPE COUPLER FROM REHAU Universal. Safe. Economical. Possible applications include
More informationInstallation and Maintenance Instructions
Installation and Maintenance Instructions Bradley Barrier-Free HN-300 In-Wall Shower Table of Contents Pre-Installation Information................2 Warranty...............................2 Components
More information9 PIECE TUNGSTEN CARBIDE HOLE SAW KIT. Model 90721
9 PIECE TUNGSTEN CARBIDE HOLE SAW KIT Model 90721 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ
More informationKeysight 86205B RF Bridge
Keysight 86205B RF Bridge Operating and Service Manual Notices Keysight Technologies 2011, 2014 No part of this manual may be reproduced in any form or by any means (including electronic storage and
More informationTEST REPORT IEC Safety of Transportable Motor-Operated Power Tools
Test Report issued under the responsibility of: STAYER IBÉRICA S.A TEST REPORT Safety of Transportable Motor-Operated Power Tools REPORT IDS TR_POTENZA160_SEG_01 Report Reference No. : TR_POTENZA160_SEG_01
More informationFORTRESS BOTTOM PLATE ANCHORS. Product. Scope. Building Regulations. Appraisal No. 687 [2017]
FORTRESS BOTTOM PLATE This Appraisal replaces BRANZ Appraisal No. 687 (2010) BRANZ Appraisals Technical Assessments of products for building and construction. Manufacturing Suppliers Limited 560 Rosebank
More informationFletcher F-3000 / F-3100 Accessory Laser Kit
Fletcher F-3000 / F-3100 Accessory Laser Kit Shown Assembled on F-3000 Machine Product Warranty The Fletcher-Terry Company warrants the product purchased to be free from defects in parts and workmanship
More informationStandard for Subsea High Integrity Pressure Protection Systems (HIPPS) API STANDARD 17O SECOND EDITION, JULY 2014
Standard for Subsea High Integrity Pressure Protection Systems (HIPPS) API STANDARD 17O SECOND EDITION, JULY 2014 Special Notes API publications necessarily address problems of a general nature. With respect
More informationcivil product range JUNCTION BOXES DUCT CHANNELS AND COVERS Gas Line Cover Slabs ESB Railways ROAD GULLY AND LIDS
kilform civil product range ESB CCTV Eircom Services Lighting Risers DUCT CHANNELS AND COVERS Gas Line Cover Slabs ESB Railways ROAD GULLY AND LIDS Untrapped Gully Trapped Gully Large Trapped Gully Headwalls
More informationLIFE TIME. polycarbonate sheeting
LIFE TIME polycarbonate sheeting blocks Enjoy the freedom of outdoor living safe from UV danger Solasafe polycarbonate sheeting provides 99.9% protection from harmful UV rays that cause sunburn and skin
More informationAmerican Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Outputs to 1000 Vdc 4 Fully Programable Outputs 4 Single and Dual Outputs 4 Wide Input Ranges (10-20Vdc, 18-36Vdc) 4 1000 Vdc Output Isolation 4 Continuous
More informationAAMA Voluntary Guideline For Engineering Analysis of Window and Sliding Glass Door Anchorage Systems
A M E R I C A N A R C H I T E C T U R A L AAMA 2501-06 Voluntary Guideline For Engineering Analysis of Window and Sliding Glass Door Anchorage Systems M A N U F A C T U R E R S A S S O C I A T I O N TABLE
More informationISO 3213 INTERNATIONAL STANDARD. Polypropylene (PP) pipes Effect of time and temperature on the expected strength
INTERNATIONAL STANDARD ISO 3213 Third edition 2009-09-15 Polypropylene (PP) pipes Effect of time and temperature on the expected strength Tubes en polypropylène (PP) Influence du temps et de la température
More informationISO 7465 INTERNATIONAL STANDARD. Passenger lifts and service lifts Guide rails for lift cars and counterweights T-type
INTERNATIONAL STANDARD ISO 7465 Fourth edition 27-11-15 Passenger lifts and service lifts Guide rails for lift cars and counterweights T-type Ascenseurs et monte-charges Guides de cabine et de contrepoids
More informationQuick-Drain Installation Requirements Large Volume Drainage Models
Quick-Drain Installation Requirements Large Volume Drainage Models Installation of the Quick-Drain-QFLV and Quick-Drain-HFLV Fluid Management Systems is a straightforward process. These installation instructions
More informationPBM-UNI Installation Guide
1321 S. State College Blvd., Fullerton, CA 92831 USA Warning Statements Warning Warning Warning THE CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FOUR (4) TIMES THE WEIGHT OF THE PROJECTOR.
More informationACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES WIRE MESH PARTITION FOLDING GATE
acorn WIRE ACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES 10 22 13 WIRE MESH PARTITION 10 22 16 FOLDING GATE GUIDE Page 4 / 5 No. 130A All wire type for normal industrial use. 7, 8, 9, 10 and
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 17636-1 First edition 2013-01-15 Non-destructive testing of welds Radiographic testing Part 1: X- and gamma-ray techniques with film Contrôle non destructif des assemblages soudés
More informationLC200C9F Ceiling Mount for up to 32" Flat Panel Screens with 200mm x 200mm VESA Mounting Patterns
Page 1 of 6 LC200C9F Ceiling Mount for up to 32" Flat Panel Screens with 200mm x 200mm VESA Mounting Patterns The LC200C9F Flat Screen Ceiling Mount is designed to suspend a monitor from a round flange
More informationTEST REPORT IEC Electromagnetic Compatibility (EMC)
Test Report issued under the responsibility of: STAYER IBÉRICA S.A TEST REPORT Electromagnetic Compatibility (EMC) REPORT IDS TR_ PLUS_140_EMC_01 Report Reference No. : TR_ PLUS_140_EMC_01 Date of issue...
More informationCERTIFIED MAIL: September 1, 2016
CERTIFIED MAIL: 91 7199 9991 7035 3561 8350 September 1, 2016 Mandy Eubanks, Apartment Manager The Villas on Cantrell 8101 Cantrell Rd Little Rock, AR 72227 RE: The Villas on Cantrell Inspection AFIN:
More informationWrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings DWV
ASME B16.29-2017 (Revision of ASME B16.29-2012) Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings DWV AN AMERICAN NATIONAL STANDARD ASME B16.29-2017 (Revision of ASME B16.29-2012)
More informationDIRECT BURY SYSTEM CABLE-TIGHT WIRE MANAGEMENT SYSTEM PIPING & CONTAINMENT SUBMERSIBLE PUMPING SYSTEMS
SUBMERSIBLE PUMPING SYSTEMS PIPING & CONTAINMENT SYSTEMS CABLE-TIGHT SYSTEM DIRECT BURY SYSTEM For far too long our industry has relied on old and outdated methods of conveying cables underground our forecourts.
More informationCopper Tube L AIR CONDITIONING & REFRIGERATION COPPER TUBE AS/NZS 1571 ASTM B280 BSEN
Copper Tube L AIR CONDITIONING & REFRIGERATION COPPER TUBE AS/NZS 1571 ASTM B280 BSEN 12735 www.kembla.com.au Copper Tube L MM Kembla has been providing our customers with the highest quality and most
More informationISO INTERNATIONAL STANDARD. Hexagon socket head cap screws with metric fine pitch thread. Vis à tête cylindrique à six pans creux à pas fin
INTERNATIONAL STANDARD ISO 12474 First edition 2010-10-01 Hexagon socket head cap screws with metric fine pitch thread Vis à tête cylindrique à six pans creux à pas fin Reference number ISO 12474:2010(E)
More informationLC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns
Page 1 of 6 LC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns A multi-position dual articulating arm for flat screens up to 60
More informationACC-6SMRP2U Data Sheet
ACC-6SMRP2U Data Sheet 6 min co-ax cable with SMA Reverse Polarity jack and u.fl plug ADS-CC6SMRP2U-103R Data Sheet December 3, 2014 2014 ACKme Networks. http://ack.me Disclaimer While the information
More informationISO INTERNATIONAL STANDARD. Timber structures Dowel-type fasteners Part 1: Determination of yield moment
INTERNATIONAL STANDARD ISO 10984-1 First edition 2009-08-15 Timber structures Dowel-type fasteners Part 1: Determination of yield moment Structures en bois Éléments de fixation de type cheville Partie
More informationI dedicate this book to the Lord Jesus Christ, my mentor and teacher. Proverbs 16:3 NOTICE TO THE READER ABOUT THE AUTHOR
April 28, 2018 NOTICE TO THE READER The publisher does not warrant or guarantee any of the products described herein or perform any independent analysis in connection with any of the product information
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11699-1 Second edition 2008-09-15 Non-destructive testing Industrial radiographic film Part 1: Classification of film systems for industrial radiography Essais non destructifs
More informationDATA SHEET. BZX884 series Voltage regulator diodes DISCRETE SEMICONDUCTORS. Product data sheet Supersedes data of 2003 May Mar 26 BOTTOM VIEW
DISCRETE SEMICONDUCTORS DATA SHEET BOTTOM VIEW M3D891 Supersedes data of 2003 May 15 2004 Mar 26 FEATURES Two tolerance series: ±2% and ±5% Working voltage range: nominal 2.4 V to 75 V (E24 range) Leadless
More informationABOUT INLAND. Tannis Karklin, E.I.T Technical Sales and Marketing
ABOUT INLAND Inland roots in the Winnipeg area date back to the early 960 s. Over time, through a number of mergers and acquisitions Inland Pipe is now part of the Lehigh Hanson group in North America
More informationAlfa Laval Material Standard T
Marking of material and components for heat exchangers Prepared and edited by Materials & Chemistry Centre, Tumba, Sweden Page No. of pages Revision No. Date 1 7 10 2014-04-28 COPYRIGHT Alfa Laval AB 2014.
More informationCONSULTANT ACCREDITATION SCHEME SEWER DESIGN
CONSULTANT ACCREDITATION SCHEME SEWER DESIGN DRAWING CRITERIA AND CHECKLIST Produced by SA Water Corporation Asset Management Group June 2013 Land Developer Agreements Contact Information Details Sharyn
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1452-1 First edition 2009-12-01 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride)
More informationNV4V31SF. Data Sheet R08DS0070EJ0100 Rev Blue-Violet Laser Diode 405 nm Blue-Violet Laser Light Source DESCRIPTION FEATURES APPLICATIONS
Blue-Violet Laser Diode 405 nm Blue-Violet Laser Light Source Data Sheet R08DS0070EJ0100 Rev.1.00 DESCRIPTION The is a blue-violet laser diode with a wavelength of 405 nm. A newly developed LD chip structure
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 21457 First edition 2010-09-01 Petroleum, petrochemical and natural gas industries Materials selection and corrosion control for oil and gas production systems Industries du
More informationFastener and Sealant Selector Guide Trimo Insulated Panels - Qbiss One
Fastener and Sealant Selector Guide Trimo Insulated Panels - Qbiss One Trimo Qbiss One Fastener and Sealant Selector Guide Contents Products for specific applications Page 3-6 Technical data Page 7-8 Technical
More informationDouble Coated Tapes with Adhesive 300MP B 9690F LE
3 Double Coated Tapes with Adhesive 300MP Technical Data October, 2002 Product Description These 3M Double Coated Tapes feature a thin polyester film for dimensional stability and improved handling with
More informationInstallation Instructions/Operation and Maintenance Manual. PS DOORS Contact Information. Website psdoors.com
Ladder Safety Gate Installation Instructions/Operation and Maintenance Manual Models All Models: LSG-5 to LSG-48 Table of Contents Product Information...2 Inspection & Mainteance...2 Warranty Information...2
More informationExcavating, Backfilling, and Compaction for Utilities Piping (Plumbing).
SECTION 15047 - IDENTIFICATION PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Identification including necessary accessories indicated on Construction Documents and specified in this section or as required
More informationStepping ahead in technology & innovation PIPING INSTITUTE OF TECHNOLOGY & ANALYSIS SOLUTIONS
Stepping ahead in technology & innovation PIPING INSTITUTE OF TECHNOLOGY & ANALYSIS SOLUTIONS PIPING ENGINEERING & PLANT DESIGN Chapter 1. Introduction of Piping Industry & Role of Piping Engineer 1.1.
More informationLC200DS2 Double Stud Dual Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns
LC200DS2 Double Stud Dual Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns Multi-position triple pivoting arms allows you to position the monitor
More informationVALVES AND PENSTOCKS FOR WATER
VALVES AND PENSTOCKS FOR WATER www.cmo.es Our COMPANY CMO is a company dedicated to the design, manufacture and assembly of standard and special valves and penstocks. Its extensive manufacture range allows
More informationLC200WT Security Wall Mount with Tilt for up to 32" Flat Screens
Page 1 of 6 The LC200WT Security Wall Mount with Tilt is designed to secure up to a 32" flat panel monitor to the wall while still allowing the monitor to tilt. The VESA mounting patterns on the front
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 400 V AC / Class Y2, 300 V AC / 250 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, V AC / Class Y, V AC / V AC FEATURES Complying with IEC 638-1 3 rd edition High reliability Complete range of capacitance values Radial leads Singlelayer
More informationAVAILABLE SIZES. Label Length (mm) Label Length (inches) PART NUMBER EXAMPLE EET P 4. Color (Yellow) Material (Polyester) Width (15.
Pressure sensitive adhesive labels for safety, warning and electrical box identification. The labels are designed to protect against abrasion, environmental and chemical exposure. Electrical and safety
More informationBio-Sand Filtration Mould Construction Guidelines
United Kingdom The Shieling, Wreay Carlisle CA4 0RL Tel: +44 (0)1697 47 5369 Mobile: +44 (0) 7739 665 777 Email: info@biosandfilter.org Madagascar Libanona Americain PB 307 Fort Dauphin (614) Tel: +261
More informationType Sealing Poles Contact configuration Rated voltage Model. Type LED indicator Poles Rated voltage Model
Relays with Forcibly Guided Contacts CSM DS_E_6_ Compact, Slim Relays Conforming to EN Standards Relays with forcibly guided contacts (EN50205 Class A, certified by VDE). Supports the CE marking of machinery
More informationSX204. Headphone Amplifier. Symetrix. Owner s Manual
Symetrix SX204 Headphone Amplifier Owner s Manual Symetrix Inc. 14926 35th Avenue West Lynnwood, Washington 98037 Voice: (206) 787-3222, (800) 288-8855 Fax: (206) 787-3211 Copyright 1988, 1994 Symetrix
More informationType Poles Contact configuration Rated voltage Model G7S-4A2B 24 VDC 3PST-NO, 3PST-NC
Relays with Forcibly Guided Contacts G7S CSM_G7S_DS_E_5_ Relays Conforming to EN Standard Relays with forcibly guided contacts (EN50205 Class A, certified by VDE). Supports the CE marking of machinery
More informationISO/TR TECHNICAL REPORT. Ergonomics Construction and application of tests for speech technology
TECHNICAL REPORT ISO/TR 19358 First edition 2002-10-01 Ergonomics Construction and application of tests for speech technology Ergonomie Élaboration et mise en œuvre des tests des systèmes de technologie
More informationStandards Manager Web Standards List PPI-Plastic Pipe Institute
Standards Manager Web Standards List PPI-Plastic Pipe Institute Id Number Title Year Organization Page 1 TN-44 LONG TERM RESISTANCE OF AWWA C906 POLYETHYLENE (PE) PIPE TO POTABLE WATER 2015 PPI 0 DISINFECTANTS
More informationQuick-Drain Installation Requirements
Quick-Drain Installation Requirements Installation of the Quick-Drain-QF and Quick-Drain-HF Fluid Management Systems is a straightforward process. These installation instructions are written in a general
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1452-2 First edition 2009-12-01 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride)
More informationContinuous On-line Measurement of Water Content in Petroleum (Crude Oil and Condensate)
API Manual of Petroleum Measurement Standards TR 2570 EI Hydrocarbon Management HM 56 Continuous On-line Measurement of Water Content in Petroleum (Crude Oil and Condensate) First Edition, October 2010
More informationTOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA48015F. 1.5 V Three-Terminal Low Dropout Voltage Regulator with Output Current of 1 A
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic.5 V Three-Terminal Low Dropout Voltage Regulator with Output Current of A The consists of fixed-positive-output, low-dropout regulators with
More informationSTEAM QUALITY TEST ELBOWS
STEAM QUALITY TEST ELBOWS V W Elbow Size V W 0.75-1.5 40mm 100mm 2 or larger 50mm 100mm Test Elbow Dimensions Nominal size Pipe outside diameter (inches/mm) Pipe wall thickness X Y A - Both ends B - All
More informationStop Gates & Stop Logs. Series 500. ine. Manufacturing high quality gates since 1977
Stop Gates & Stop Logs Series 500 Manufacturing high quality gates since 1977 ine Stop Gates & Stop Logs Series 500 Contents Stop Gate Introduction 3 Model 501 3 Model 503 4 Model 503-C 4 Stop Gate Specification
More informationTPM + Lenze ECS. Quick Startup Guide D Revision: 02
4091-D012345 00 TPM + Lenze ECS Quick Startup Guide 4091-D032121 Revision: 02 Quick Startup Guide TPM + Revision history Revision Date Comment Chapter 01 27 th July 2012 First release All 02 27 th March
More information