DIRECT BURY SYSTEM CABLE-TIGHT WIRE MANAGEMENT SYSTEM PIPING & CONTAINMENT SUBMERSIBLE PUMPING SYSTEMS
|
|
- Amberly Anderson
- 6 years ago
- Views:
Transcription
1 SUBMERSIBLE PUMPING SYSTEMS PIPING & CONTAINMENT SYSTEMS CABLE-TIGHT SYSTEM DIRECT BURY SYSTEM For far too long our industry has relied on old and outdated methods of conveying cables underground our forecourts. Finally, one manufacturer has delivered the innovative, liquid-tight, vapour-tight wire management system solution we ve been waiting for. See how a solution built specifically for your needs can help your business.
2 CABLE-TIGHT SYSTEM The UPP brand Cable-Tight Wire Management System provides a true end-to-end solution for electrical, sensor, and data wiring containment. All of the benefits of the field-proven electrofusion welded pipework system are applied to this crucial part of the forecourt installation to ensure a fully liquid-tight underground system. Highlights Specifications Electrofusion entry seals with integrated slotted Conduit and ducting Internal bore diameters: 5mm compression grommets create a leak proof system by eliminating liquid or vapour penetration. (3mm conduit) Max vapour seal penetration in containment: 50mm Direct bury entry fittings are ideal for applications (3mm conduit) where cable of 5mm to 6mm diameter are directly buried in the ground, such as grounding wires and armored power cables. Approvals Conduit approval to AS/NZS 053.:00 Slotted compression grommet design allows wires to be positioned into place without having to pull them through each hole for significantly easier wire pulling. Direct Bury System Components Systems and their various components installed. Transition chamber with cover Double direct bury entry seal 3 Single direct bury entry seal 4 0mm ducting 5 0mm entry seal 6 3mm conduit 7 3mm entry seal 8 3mm coupler 3mm and 0mm Contained Range of grommets sold separately 7
3 Direct Bury Wire Management System Ideal for accommodating direct bury cables requiring a liquid-tight containment entry. Direct Bury Entry Seals Direct bury entry seals are ideal for applications where cable is directly buried in the ground. Entry seals come without compression grommets. Compression grommets must be ordered separately. All compression grommet cable entries marked with maximum diameter and will accommodate a range of wire diameters (see ranges in descriptions below). Grommets not included 30-DBC 303-DBC Electrofusion single direct bury entry seal, () entry Electrofusion double direct bury entry seal, () entries Replacement compression nut for 30-DBC and 303-DBC cable compression grommet - (3) 5-6mm cable entries (0 pack) Typical use: Sensors, line leak detection, interstitial tank and pipe monitoring, tank gauge wiring. Corresponding plug: Cable compression grommet - () 7-9mm cable entry (5 pack) Typical use: Tank grounding wiring. Corresponding plug: Cable compression grommet - () 9-mm cable entry (5 pack) Typical use: Card reader in dispenser or outdoor payment terminal wiring. Corresponding plug: Cable compression grommet - () -4mm cable entry (5 pack) Typical use: Tank or dispenser power wiring. Corresponding plug: Cable compression grommet - () 4-6mm cable entry (5 pack) Typical use: Dispenser hook signal wiring. Corresponding plug: Blank compression grommet (0 pack) Typical use: Line integrity testing and future expansion. Cable Entry Plugs Used to seal off unused cable entries in compression grommets mm cable entry plug (0 pack) 9mm cable entry plug (0 pack) mm cable entry plug (0 pack) mm cable entry plug (0 pack) 4mm cable entry plug (0 pack) 6mm cable entry plug (0 pack) Direct Bury Installation Tools 303-CLAMP HS3 30-CLAMP HSCS Welding clamp for 303-DBC 0mm hole saw Welding clamp for 30-DBC 63mm hole saw
4 3mm Cable-Tight Wire Management System Ideal for accommodating single large and multiple smaller diameter cables. 3mm Conduit EC-E 3mm conduit, orange, 00m coil 3mm Conduit Entry Seal Entry seals come without compression grommets. Compression grommets must be ordered separately. All compression grommet cable entries are marked with maximum diameter and will accommodate a range of wire diameters (see ranges in descriptions below). Grommets not included EC Electrofusion entry seal, for 3mm conduit Replacement compression nut for EC 0-03-L Electrofusion coupler, for 3mm conduit cable compression grommet - (3) 5-6mm cable entries (0 pack) Typical use: Sensors, line leak detection, interstitial tank and pipe monitoring, tank gauge wiring. Corresponding plug: Cable compression grommet - () 7-9mm cable entry (5 pack) Typical use: Tank grounding wiring. Corresponding plug: Cable compression grommet - () 9-mm cable entry (5 pack) Typical use: Card reader in dispenser or outdoor payment terminal wiring. Corresponding plug: Cable compression grommet - () -4mm cable entry (5 pack) Typical use: Tank or dispenser power wiring. Corresponding plug: Cable compression grommet - () 4-6mm cable entry (5 pack) Typical use: Dispenser hook signal wiring. Corresponding plug: Blank compression grommet (0 pack) Typical use: Line integrity testing and future expansion. Cable Entry Plugs Used to seal off unused cable entries in compression grommets mm cable entry plug (0 pack) 9mm cable entry plug (0 pack) mm cable entry plug (0 pack) mm cable entry plug (0 pack) 4mm cable entry plug (0 pack) 6mm cable entry plug (0 pack) 3mm Installation Tools 30-CLAMP HSCS Welding clamp for EC 5mm hole saw
5 0mm Ducting DUCT mm ducting, blue, 75m coil 0mm Ducting Entry Seal The 0mm ducting entry seals is ideal for large bundles of cables running from the transition chamber back to the main kiosk TP Electrofusion entry seal, for 0m ducting 0 mm Ducting Installation Tools 305-CLAMP Welding clamp for TP HS5 40mm hole saw Transition Chamber Built specifically for wire management, the rugged transition chamber provides an easy access point for the electrician for maintenance or future expansion. ECH D400 Transition chamber, 700mm x 600mm Removable segregation panel VTL-750X650 Transition chamber test lid assembly, 750mm x 650mm PCR-LIFT Transition chamber access cover lifting tool A Franklin Fueling Systems Brand franklinfueling.com 3760 Marsh Rd. Madison, WI 5378, USA Tel: Fax: Tel: USA & Canada Tel: UK +44 (0) Tel: Mex Tel: FR +33 (0) Tel: CH FFS
EMO. Service Instruction. created by Frank Weithöner. Table of contents: Special Tools Assembling Mixing Chamber
EMO Service Instruction created by Frank Weithöner Table of contents: - Special Tools Disassembling Mixing Chamber Assembling Mixing Chamber Adjustment Rotor / Level Indicator Unit Temperature Compensating
More informationARCTIC TRACE INSTALLATION INSTRUCTIONS 352C Hazardous Location Water Proof Strain Relief Kit for TL Series Heating Cable
ARCTIC TRACE INSTALLATION INSTRUCTIONS 352C Hazardous Location Water Proof Strain Relief Kit for TL Series Heating Cable SEALING GLAND SEALING PAST WARNING: to prevent electric shock or fire, this product
More information18W Nightsensor Bulkhead
18W Nightsensor Bulkhead Cat No. ECO18P instructions Instructions A Retaining clip B Vertical location Sensor Horizontal location Sensor Wall fixing hole C Wall fixing hole D Wall fixing hole Sensor Vertical
More informationBRIDLE & STILLING WELL LEVEL MEASUREMENT. FEATURING THE VEGAflex 60 SERIES
BRIDLE & STILLING WELL LEVEL MEASUREMENT FEATURING THE VEGAflex 60 SERIES PIPE MEASUREMENT WHY USE GUIDED MICROWAVE? Level measurement that requires using a pipe comes with a set of conditions that can
More information5000 Series Single Impeller Firefighter
5000 Series Single Impeller Firefighter Pump made in Australia & fitted to genuine brand name engines SERVICING INSTRUCTIONS WARNING: ALL ELECTRICAL WORK TO BE PERFORMED BY SUITABLY QUALIFIED ELECTRICAL
More informationNew Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
More informationETC Installation Guide
ETC Installation Guide Unison Using this Guide This document is intended to guide you through the installation of the DRd Semi-Recessed installation kit. Reference the Unison DRd Rack Enclosure Installation
More informationspy pig Tracking systems
spy pig Tracking systems Spy pig Transmitters For the most reliable signal available, the SPY Pig Transmitter uses low frequency signals to effectively and consistently penetrate a steel pipe wall. We
More informationVeto spring agitator / kw burner heads
7.2004/2 Enclosure for Veto Chip Matic/ Veto Chip Matic Maxi instruction manual. Veto spring agitator / 160 640 kw burner heads Instruction manual Manufacturer ALA TALKKARI Veljekset Ala-Talkkari Oy Fin-62130
More informationspy pig Tracking systems
spy pig Tracking systems PIPELINE INSPECTION COMPANY Spy pig Transmitters For the most reliable signal available, the SPY Pig Transmitter uses low frequency signals to effectively and consistently penetrate
More informationTechnologies, Solutions and Applications. Magnetic Level Indication and Bridle Measurements
Technologies, Solutions and Applications Magnetic Level Indication and Bridle Measurements Magnetic Level Indicators and Bridles VEGA is dedicated to offering complete magnetic level indication and engineered
More informationBasic Principles and Operation of Transformer
Basic Principles and Operation of Transformer CONSTRUCTIONAL ASPECTS Cores In order to enhance core s magnetic properties, it is constructed from an iron and silicon mixture (alloy). The magnetic core
More informationWELD MOUNT fastening system
The fastener that sticks WELD MOUNT fastening system TITGEMEYER Tb1695GB(0918)2 All rights reserved. All technical data, performance descriptions, recoendations and guidelines contained in this catalogue
More informationMODULAR TRACKER SOLAR
SOLAR MODULAR TRACKER INSTALLATION INSTRUCTIONS Congratulations on purchasing a DH Solar Tracker! The DH Solar Tracker moves throughout the day with the use of a timed controller. Tracking throughout the
More informationThru Wall Floor Seals For New Installation
The O-Z/Gedney Thruwall and Floor Seals provide a positive means of sealing pipe, conduit or tube where they pass through a concrete foundation of a structure below grade or below ground water level or
More informationThe Isolator/Surge Protector (ISP)
The Isolator/Surge Protector (ISP) Technical Literature INTRODUCTION The Isolator/Surge Protector (ISP) is a solid-state device with logic-controlled circuitry which simultaneously provides isolation and
More informationB-Too Drilling and Tapping Machine Instruction and Maintenance Manual
B-Too Drilling and Tapping Machine Instruction and Maintenance Manual Thank you for your purchase of the B-Too Drilling and Tapping Machine. Please read and understand this short operation manual. Our
More informationUtility Structures. Utility vaults, trenches, transformer pads Electrical Pole Bases and switching cubicles
Utility Structures Utility vaults, trenches, transformer pads Electrical Pole Bases and switching cubicles PRODUCT GUIDE & TECHNICAL REFERENCE MANUAL Providing the right solutions. UTILITY STRUCTURES Perfect
More informationTechnologies, Solutions, and Applications. Magnetic Level Indication and Bridle Measurements
Technologies, Solutions, and Applications Magnetic Level Indication and Bridle Measurements Contents Leadership in Magnetic Level Indicators and Bridles 3 How We Earn Your Business 4 Magnetic Level Indictor
More informationThe Isolator/Surge Protector (ISP)
The Isolator/Surge Protector (ISP) Technical Literature INTRODUCTION The Isolator/Surge Protector (ISP) is a solid-state device with logic-controlled circuitry which simultaneously provides DC isolation
More informationIndustrial Pipe Marking
Industrial Pipe Marking Pipe and Valve Identification Specialists SPECIFICATIONS ASME (ANSI) Standard A13.1-2007 The ASME (ANSI) Standard for pipe identification is a widely used guideline in determining
More informationGeneral Information...SA1-SA4
SECTION S INDEX Product Description Page Number General Information................................................................SA1-SA4 Type FSK Thruwall & Floor Seal For Conduit, Pipe or Tubing............................
More informationInstallation & Assembly: Two Piece Suspended Ceiling Plate
Installation & ssembly: Two Piece Suspended Ceiling Plate Model: CMJ453 Max UL Load Capacity: 250 lb (113 kg) Compatible model/series* EC* EXT* DD* 2300 White Oak Circle urora, Il 60502 (800) 865-2112
More informationIMPORTANT INSTALLATION INSTRUCTIONS ATTACHED
IMPORTANT INSTALLATION INSTRUCTIONS ATTACHED For Full-Color Installation Instructions, Please Visit: VOLANT.COM and Search by Part Number Please be sure to review the enclosed instructions prior to beginning
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationHeat Exchanger Coil: Build Instructions
Heat Exchanger Coil: Build Instructions Tank Assemblies Feed Tank (Drawing: WS-101) o Use a jig-saw to cut a large circle into the top of the barrel, 2-3 inches in from the edge o Leave the lip intact.
More informationHZ101 & HZ121. Concealed And Low Level Cistern Installation Instructions
TABLE OF CONTENTS Product Overview.. 2 How to Order.. 2 Product Specifications.. 2 Tools Required... 2 Safety Instructions. 3 Visual Check.. 3 Flush Saddle Installation.. 4 Hygihose Installation. 5 Duct
More information张家港市张运机械制造有限公司 Zhangjiagang City Zhangyun Machinery Manufacturing Co.,Ltd.
Φ 32 HIGH-FREQUENCY WELDED PIPE MILL LINE 1 General Introduction Φ 32 high-frequency welded pipe production line is designed to produce welded pipes of 12~ 50mm in diameter and 0.6~1.2mm in wall thickness
More informationCosmic Ray Telescope Construction Instructions for 2017 Eclipse Tracking design
Cosmic Ray Telescope Construction Instructions for 2017 Eclipse Tracking design Parts 1 ¼ aluminum conduit 10 Two aluminum (or plastic) LB Conduit boxes, 1 ¼ thread. You want the longer box. Two -- 1 ¼
More informationPage 1 of 6 Systems Inc.
Page 1 of 6 This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions
More informationLid, Floor Monument and Two Installation Fixtures. Floor Monument Installed with Lid On and Off
Monumentation Drilling Specifications: Floor Monuments: - Floor is drilled using 1 3/4" core drill bit to a depth of 2 with a Hilti rotary hammer drill - Quikrete is used to set monuments into the floor
More informationRF-RR-T 24V Powered Routers/Temp Sensors
Page 1 of 5 RF-RR-T 24V Powered Routers/Temp Sensors Features: Benefits: Proven 802.15.4 low power network Complete range of sensor types Allows networks to be expanded Power status LED Network activity
More informationHZ301 & HZ321. Standard and Junior Flush Valve Installation Instructions
TABLE OF CONTENTS Product Overview.. 2 How to Order.. 2 Product Specifications.. 2 Tools Required... 2 Safety Instructions. 3 Visual Check.. 3 Flush Pipe Installation 3 Hygihose Installation. 4 Duct Connection.
More informationInstallation Instructions
Installation Instructions READ BEFORE INSTALLING UNIT For Slider Casement Air Conditioners INSTALLATION WARNINGS AND CAUTION Carefully read the installation manual before beginning. Follow each step as
More informationMC CHANGER CABINET INSTALLATION INSTRUCTIONS
8M00356 REV. 10 www.standardchange.com 1-800-968-6955 Technical Phone Support is from 8:00AM to 7:30PM E.S.T., Monday-Friday Walk-in Service is from 8:00AM to 4:30PM E.S.T., Monday-Friday Parts Department
More informationOperating instructions OI/FPD350-EN Rev. H. FPD350 Torbar Averaging pitot tubes
Operating instructions OI/FPD350-EN Rev. H FPD350 Torbar The Company We are an established world force in the design and manufacture of measurement products for industrial process control, flow measurement,
More informationBeam and Purlin Clamps Beam Clamps
Metal Framing & Cable Tray Steel City Hangers, Clamps & Fasteners Beam and Purlin Clamps Beam Clamps Fits beam flanges to 2" Supports 4" and 8" threaded rod, S-hooks, electrical boxes, conduit and bridle
More informationVacuum Chuck System How I Built Mine
Vacuum Chuck System How I Built Mine While there is a lot of info on the subject of vacuum systems that can be located on the various forums, not many walk you through the process of putting one together.
More informationIOM 004 Effective 3/29/04 Rev A. MULTI-VENT Laminar Flow Panels Installation Operation and Maintenance
IOM 004 Effective 3/29/04 Rev A MULTI-VENT Laminar Flow Panels Installation Operation and Maintenance Contents Batten Arrangements...3 Slip-On Battens...4 Ceiling Opening...5 Installation...5 Hanger Bracket
More informationComplete line of Holemaking Products and Accessories
Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related
More informationClearView Panels Mil 3 Finished Sides with Grommets 1 Hem Side Mil 3 Finished Sides with Grommets 1 Hem Side DESCRIPTION
ClearView Panels Photo may show a different but similar model. 2006 FarmTek All Rights Reserved. Reproduction is prohibited without permission. Revision date: November 2006rp STK# DESCRIPTION 105659 16
More informationMUNICIPAL INDUSTRIAL CONSTRUCTION / RENTAL AGRICULTURE. SF Series Submersible Solids-Handling Pumps
MUNICIPAL INDUSTRIAL CONSTRUCTION / RENTAL AGRICULTURE SF Series Submersible Solids-Handling Pumps A History of Innovation 2 Gorman-Rupp has been revolutionizing the pumping industry since 1933. Over the
More informationInstallation & Assembly: Suspended Ceiling Kit
Installation & ssembly: Suspended Ceiling Kit Model: CMJ450 Max UL Load Capacity: 250 lb (113 kg) Compatible model/series* EC* EXT* DD* 2300 White Oak Circle urora, Il 60502 (800) 865-2112 Fax: (800) 359-6500
More informationNEW APPROACH TO THE PIPE TO GUSSET PLATE CONNECTION
NEW APPROACH TO THE PIPE TO GUSSET PLATE CONNECTION Prepared by Liftech Consultants Inc. Quality Assurance Review for Liftech Consultants Inc. Author: Kenton Lee Structural Engineer Editor: Erik Soderberg
More informationAssembly Instructions
P/N 8650/8655 Assembly Instructions NOTE: Your Sherline CNC Cam Grinder is double boxed and secured to a wooden shipping frame. Upon delivery, check the outer box for damage. If the box is damaged, take
More informationCameron MBO Multi-Bowl Wellhead System
Cameron MBO Multi-Bowl Wellhead System MBO Multi-Bowl Wellhead System The Cameron MBO Multi-Bowl Wellhead System is a compact, unitized wellhead which can be used as an alternative to conventional wellhead
More informationINSTALLATION INSTRUCTIONS. March 2016 FOR FURTHER QUESTIONS, PLEASE CALL
March 2016 INSTALLATION INSTRUCTIONS FOR FURTHER QUESTIONS, PLEASE CALL 775 440 2025 JENSEN WATER RESOURCES 521 Dunn Circle, Sparks, NV 89431 JensenPumps.com Figure 1: This illustration shows a complete
More informationSECTION SWINGING AUTOMATIC ENTRANCES IN-GROUND, AUTOMATIC SWING DOOR OPERATOR CONVERTER ADAPTED TO BROOKFIELD NB-500 EXTREME DUTY OPERATOR
SECTION 084229.33 SWINGING AUTOMATIC ENTRANCES IN-GROUND, AUTOMATIC SWING DOOR OPERATOR CONVERTER ADAPTED TO BROOKFIELD NB-500 EXTREME DUTY OPERATOR PART 1-GENERAL 1.01 DESCRIPTION A. This section describes
More informationPARTS LIST GALAXY FLOOR MACHINE
PARTS LIST GALAXY FLOOR MACHINE ITEM PART NO. DESCRIPTION QTY 101 0393051 SAFETY DECAL 1 102 0393691 IDENTIFIER DECAL - GALAXY 1 103 0393351 SWITCH BOX COVER 1 104 0393531 DECAL 1 105 0393441 HANDLE GRIP
More informationInnogaz Electrofusion Systems
Tapping Tees, Saddles Couplings K TEC 17 EF Box PE - Pipe Peelers PE Pipe Split Peelers Light Weight Battery Box Pipe Cutters Alignment Clamps and Accessories Shannon EF Box Posistar Alignment Clamps Alignment
More information- 1 - P/N REV E 9/15
INSTRUCTIONS HIGH TECH II DELUXE FLUSH UNIT ASSEMBLY The following instruction is a guideline, illustrating suggested methods, assembly sequence, and tool selection. Actual assembly may vary by each situation.
More informationWrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
More informationVersion: 1.0 Revised: 6/8/2011. CBU Assembly Instructions Manual
CBU Assembly Instructions Manual Contents 1 General... 3 2 Package... 4 2.1 Packing order... 4 2.2 Unpacking... 5 3 Assembly of the body... 6 3.1 General... 6 3.2 Mounting base drilling chart... 8 3.3
More informationISSUE MODIF. ORDER NO. WEEK ISSUE MODIF. ORDER NO. WEEK ISSUE MODIF. ORDER NO. WEEK 01 SME SME SME
1. Summary The still pipe used with Rosemount 5900 LPG/LNG antenna is not supplied by RTR, but is to be manufactured by the customer according to the RTR drawing D9240041-910 or D7000001-466. Additional
More informationElectrical Construction Name:
Tools of the Trade The following are common tools that are used in the electrical industry. This hand-out is to help familiarize you with the tools, the terminology, and their use. Retractable Steel tape
More informationInstallation & Operation Manual
The eco-friendly solution to hard water SB-1200, SB-2000, SB-2800, SB-3600 & SB-4000 Installation & Operation Manual 10/13 Industrial Electronic Descaler 120/240 VAC (Auto Selected) Table of Contents Section
More informationFiber Splice Box (FSB-D) Installation Instructions
Fiber Splice Box (FSB-D) Installation Instructions Table of Contents General Product Information... 1.0 Safety Precautions... 2.0 Tools Required... 3.0 Package Contents... 4.0 Installing the Product Unpacking...
More informationTel / (USA & CANADA) /
MACHINE SHOP DISCOUNT SUPPLY Tel 0.8.87 / 800.88.09 (USA & CANADA) / Email sales@msdiscounttool.com SUPER PRECISION WEDGE TYPE TOOL POST AND TOOL HOLDER SETS Wedge Type Tool Posts are precision engineered
More informationT S 15KVA 1PH 240/480 Transformer
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T2535173S 15KVA 1PH 240/480 Transformer Acme Electric Catalog Number Manufacturer Description Weight per unit Product
More informationWestern Products, PO Box , Milwaukee, WI MOUNT KIT. Model No Ford F-150 4X
Western Products, PO Box 245038, Milwaukee, WI 53224-9538 www.westernplows.com November 1, 2009 Lit. No. 64461, Rev. 05 64500 MOUNT KIT Model No. 3239 Ford F-150 4X4 2004-08 Installation Instructions Read
More informationOperating Instructions for Microwave Level Switch. Model: LNM
Operating Instructions for Microwave Level Switch Model: LNM 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...3 5. Operating Principle...4 6. Mechanical Connection...5
More informationTylo Custom Infrared Sauna Heater Kit Installing LOW EMR Surface mount IS panels
Tylo Custom Infrared Sauna Heater Kit Installing LOW EMR Surface mount IS panels The Following instructions will guide you through a typical installation of Low EMR Surface-Mount IS panels in a Custom
More informationLiquid Tight Conduit Connector With Internal Threads, Female Liquid Tight Conduit Fittings ( YCM )
Liquid Tight Conduit Connector With Internal Threads, Female Liquid Tight Conduit Fittings ( YCM ) No. Trade Dimensions (mm) Size I.D. A B C Threads YCM-03 3/8 11.2 28.3 44.6 13.2 PT 1/2 YCM-04 1/2 14.8
More informationVSOF-BS403A. Splice Closure for Fiber Optic Cable User Manual Rev.3
Splice Closure for Fiber Optic Cable 1. Introduction 1.1 General VISSEM S BS403A protects fiber optic splicing point in various installation conditions such as aerial, manholes, ducts, wall and direct
More informationDelikon Stainless Steel Liquidtight Connectors offer corrosion resistance and the strength of stainless steel for the highest levels of endurance.
Corrosion Resistant liquid tight conduit fittings for use with flexible liquid tight metallic conduits, flexible liquid tight non metallic or PVC coated flexible metal conduit. * Liquidtight, Raintight,
More informationInstruction Manual for MHE Products DeepWater2 PushPoint Sampler Ver. 2.0 November 21, 2016
Instruction Manual for MHE Products DeepWater2 PushPoint Sampler Ver. 2.0 November 21, 2016 The DeepWater2 is heavier-duty a version of the PushPoint Sampler made of stainless steel pipe instead of SS
More informationE.C. HOPKINS LTD PGO4 PEANUT GRINDER OPERATORS MANUAL AND PARTS LIST
E.C. HOPKINS LTD PGO4 PEANUT GRINDER OPERATORS MANUAL AND PARTS LIST E.C. HOPKINS LTD UNIT 1, 82 KETTLES WOOD DRIVE, WOODGATE BUSINESS PARK, WOODGATE VALLEY, BIRMINGHAM B32 3DB TEL NO. +44 (0)121 506 6095
More informationFLIP TARP SINGLE & DOUBLE UNDERBODY TRAILERS
1-800-248-7717 1002 N. 15th Street, Middlesboro, KY 40965 FLIP TARP SINGLE & DOUBLE UNDERBODY TRAILERS INSTALLATION INSTRUCTIONS Congratulations on your purchase of a Mountain Flip Tarp Trailer system.
More informationInstallation Instructions
READ BEFORE INSTALLING UNIT For Slider Casement Air Conditioners To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may be exposed:
More informationSOCKET & NIPPLE. Quality products for a quality environment BSP THREADED FITTINGS - PP. Code K12. Socket - equal Injection moulded.
BSP THREADED FITTINGS - PP SOCKET & NIPPLE Code K12 Socket - equal 1/2 to 3 Material: PP black Socket - reduced 1/2 up to 4 in various increments Material: PP black Nipple - equal 1/2 to 4 Material: PP
More informationH2-50 Hydrogen Generator Field Update
This field update is intended to provide extra protection in the event the H2 generation cell fractures or cracks. Please add the additional parts to your H2-50 as soon as possible. Please take a digital
More informationPRODUCT CATALOG Meadowview Rd Junction City, OR fax
Made in the USA, since 1972 PRODUCT CATALOG Nichols Manufacturing 292 Meadowview Rd Junction City, OR 97448 541-485-60 sales@nicholsmanufacturing.com www.nicholsmanufacturing.com 122616 Nichols Manufacturing
More informationTHE GOOD GUIDE TO ELECTROFUSION JOINTING....Connect
THE GOOD GUIDE TO ELECTROFUSION JOINTING...Connect THE GOOD GUIDE TO ELECTROFUSION JOINTING This guide will provide basic information to enable the operative to: Equipment required: Understand the principles
More informationNORTH CAROLINA DEPARTMENT OF HEALTH AND HUMAN SERVICES DIVISION OF PUBLIC HEALTH ENVIRONMENTAL HEALTH SECTION ON-SITE WATER PROTECTION BRANCH
NORTH CAROLINA DEPARTMENT OF HEALTH AND HUMAN SERVICES DIVISION OF PUBLIC HEALTH ENVIRONMENTAL HEALTH SECTION ON-SITE WATER PROTECTION BRANCH SEPTIC/PUMP TANK RISER ASSEMBLIES APPROVAL Septic/Pump Tank
More informationInstallation guide 971 SmartRadar LTi
Installation guide 971 SmartRadar LTi March 2009 Part no. 4416.715 Revision 3 Enraf B.V. P.O. Box 812 2600 AV Delft Netherlands Tel. : +31 15 2701 100 Fax : +31 15 2701 111 E-mail : enraf-nl@honeywellenraf.nl
More informationApplications Features
GE Measurement & Control TransPort PT878 Panametrics Portable Liquid Ultrasonic Flowmeter Applications The TransPort PT878 portable liquid flowmeter is a complete portable ultrasonic flow metering system
More informationSunrise Deck Assembly Instructions for Kingston Left
Sunrise Deck Assembly Instructions for Kingston Left It s easiest to build the deck frame first like it will be lying on its back and then after all 4 legs and horizontals are in place, tip the deck toward
More informationKING-GAGE KING. ES2 Liquid Level Transmitter. Installation and Operation Instructions ma Liquid Level Transmitter EX-1834
Effective: April 2007 (Replaces January 2007) KING-GAGE 4-20 ma Liquid Level Transmitter ES2 Liquid Level Transmitter Installation and Operation Instructions Since 1937 KING E N G I N E E R I N G C O R
More informationDrilling machine for use on branch saddles fused. Instructions for assembly and use
Drilling machine for use on branch saddles fused Instructions for assembly and use DRILLING MACHINE FOR USE ON BRANCH SADDLES FUSED ON POLYETHYLENE PIPELINES FOR PRESSURE AND NON-PRESSURE USE Ø 90 1000
More informationSINGLE PHASE BUCK & BOOST TRANSFORMERS INSTRUCTION MANUAL
SINGLE PHASE INSTRUCTION MANUAL DIAGRAM D This manual applies to all single-phase buck & boost transformers sold by Larson Electronics. Please refer to the connection diagram on pages 4-6 for properly
More informationSECTION SWINGING AUTOMATIC ENTRANCES
SECTION 084229.33 SWINGING AUTOMATIC ENTRANCES IN-GROUND, AUTOMATIC SWING DOOR OPERATOR CONVERTER ADAPTED TO IR/DOR-O-MATIC SENIOR SWING & ASTRO SWING OPERATOR PART 1-GENERAL 1.01 DESCRIPTION A. This section
More informationWRS Artificial Lift System
WRS Artificial Lift System Patent Pending Designed to adapt to any type of Artificial Lift Suspension! Artificial Lift and Down hole gauge monitoring Is fast Becoming the go to in the oil production market.
More informationD300K 3+3 SE KUBOTA PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-737 P-737 RETURN TO MAIN INDEX PARTS LIST FOR P-737-A P-737-A ILLUSTRATION
More informationInstructions for the installation of Handy Well Pump Models HWP-E, HWP and HWP-L. **Read thoroughly before you start!**
Instructions for the installation of Handy Well Pump Models HWP-E, HWP and HWP-L. **Read thoroughly before you start!** Model HWP-E Model HWP Model HWP-L Congratulations! You have purchased a quality hand
More informationInstalling LOW EMR Surface mount IS panels in a Custom Cut Sauna TyloHelo Inc.
Installing LOW EMR Surface mount IS panels in a Custom Cut Sauna TyloHelo Inc. The Following instructions will guide you through a typical installation of Low EMR Surface-Mount IS panels in a Custom Cut
More informationINSTALLATION & MAINTENANCE INSTRUCTIONS ON THE PCR-5 4 CHANNEL REMOTE CONTROL SYSTEM
TM TM LIGHTING INSTALLATI & MAINTENANCE INSTRUCTIS THE PCR-5 4 CHANNEL REMOTE CTROL SYSTEM FEATURES Easy to Install Approved to U563 & CSA C22.2 No. 218-1-13 Pending Remote Control Operation from PCT-5
More informationACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports
ACCESSORIES ACCESSORIES Fasteners PMI has a variety of Fasteners and Connectors for any application. Euro-Bolts, Spiral Cam Connectors, Screws and Sleeves - we have your solution! Shelf Supports Assorted
More informationK K
Fasteners 501 K0043 Fasteners with spring clip 70 1 14 R1,5 7 3 4,3 11 17,5,5 Fastener K0043.1430701 Clamp K0043.9143111 45 4 4,3 Fasteners with spring clips for safe holding and locking of flaps, container
More informationHBS-AP ASSEMBLING INSTRUCTIONS
ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK 97 HBS-AP ASSEMBLING INSTRUCTIONS 1. INTRODUCTION 1.1. This manual is very easy to consult and we recommend reading it before starting work,
More informationTECHNICAL INFORMATION
NONMETALLIC FLOOR BOX & ACCESSORIES TECHNICAL INFORMATION KRALOY FB FLOOR BOX Kraloy FB Floor Box 6.063 4.030 Typ. 1" 4.940 4.560 6.375 3/4" 3/4" 5.740 6.000 1" Product Description Kraloy FB Floor Box
More information400/480 Volt ProBlue Adhesive Melters
E-1 Appendix E WARNING: Allow only personnel with appropriate training and experience to operate or service the equipment. The use of untrained or inexperienced personnel to operate or service the equipment
More informationOptical Cable Entry Facility (OCEF) Installation Instructions
Instruction Sheet 860380690 Uniprise Solutions Optical Cable Entry Facility (OCEF) Installation Instructions General The Optical Cable Entry Facility (OCEF) cabinets store optical fiber splices between
More information25 TONNE HYDRAULIC PRESS MODEL NO: AHP 26
WARNING: Read these instructions before using the machine 25 TONNE HYDRAULIC PRESS MODEL NO: AHP 26 PART NO: 7615115 OPERATION & MAINTENANCE INSTRUCTIONS LS1211 INTRODUCTION Thank you for purchasing this
More informationTB404 Conductivity sensors. Perfect for use in standard to highly corrosive solutions
Data sheet TB404 Conductivity sensors Toroidal Perfect for use in standard to highly corrosive solutions Greatly reduces coating and other fouling problems Inductive measurement technique yields a solution
More informationSensyTemp TSBA (BA R) Resistance thermometer for building automation, machine construction and environmental engineering
Change from one to two columns Data Sheet 10/10-3.61-EN Rev. D SensyTemp TSB (B R) Resistance thermometer for building automation, machine construction and environmental engineering Measurement made easy
More informationPWM. Design, Installation, and Operation. (Pulse Width Modulation Zone Controller)
Small Duct Heating, Cooling and Indoor Air Quality Systems www.hi-velocity.com TM PWM (Pulse Width Modulation Zone Controller) Design, Installation, and Operation Includes: PWM Design PWM Installation
More informationINSIDE PANEL NOT SHOWN TO DETAIL ANCHORING SYSTEM
SIX INCH ALPHA MODULE INSTALLATION KEWAUNEE SCIENTIFIC CORPORATION SIX INCH ALPHA MODULE ANCHORING SYSTEM After Alpha module has been set in desired location. Adjust the four adjustment bolts until the
More informationAdvanced Well Completion Design. 30 Sep - 04 Oct 2018, Dubai. REP logo, PMI & PMP are registered trademarks of Project Management Institute, Inc.
30 Sep - 04 Oct 2018, Dubai Approved Centre REP logo, PMI & PMP are registered trademarks of Project Management Institute, Inc. Introduction Organisational Impact This Glomacs Advanced Well training seminar
More informationCLASSIC 300D Kubota PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-498 P-498 RETURN TO MAIN INDEX PARTS LIST FOR CLASSIC 300D Kubota P-498-A P-498-A
More informationHobart Stainless Steel Solid Wire Drums Setup Guide
Hobart Stainless Steel Solid Wire Drums Setup Guide Quick installation, smooth feedability and easy arc starts 1 Stainless Steel Solid Wire Drum Features The upper portion of the drum is encompassed with
More information