(Including self-generated heat) YHighly reliable, compact and lightweight YEasily inserted into the PCB

Size: px

Start display at page:

Download "(Including self-generated heat) YHighly reliable, compact and lightweight YEasily inserted into the PCB"

Winfred Gardner
5 years ago
Views:

1 DC COMMON MODE CHOKE COILS (FOR DC AND SIGNAL LINES) LEADED TYPE OPERATING TEMP. TLF 11C CM 10C (Including self-generated heat) Equivalent circuits FEATURES Y Y YHighly reliable, compact and lightweight YEasily inserted into the PCB APPLICATIONS YTLFAM f PBX,FAX g YCM,BUMHz YTLF Type: Countemeasure for noise in the low-frequency (AM) broadcasting band. Shields against radiated emissions in the broadcasting frequency for multi-functional telephone sets. PBXs, faxes, etc. YCM/BU Type: Countermeasure for noise in the high-frequency (MHz) band 1 ORDERING CODE TLF Type TLF f g Q9 9 QW 3 4 fahg UBQ U UBH U QW f%g W M QQ QW 1 T L F Q 9 U B H 3 0 W Z Z Type TLF Line filter Dimensions of core(dia.)f g Q9 9 QWBlank space 3 4 Shape Nominal inductancefahg UBQ U core, vertically split wound example UBH core, horizontally split wound QWBlank space tolerancef%g 6 W M Internal code QQ Standard product QWBlank space CM-BU Type 1 CM BU f g RA RB 0 Q QW 1 Type CM BU C M 0 R A 0 6 Z 1 Common mode choke coile Core dimensions fmmg Shape Product classification code RA Double-wire lead RB Pin type with base 01 0 Internal code Q QWBlank space Standard product 380

2 EXTERNAL DIMENSIONS TLF9UB Type TLF9UB H Type CMGGRA Type / BU08RA Type Type W (max.) T (max.) CM0 6. (0.6) 3.0 (0.118) CM08, BU (0.433).0,6.0 (0.197, ) CM1 1. (0.610) 7.0 (0.76) CM0RB (Lines Type) CM08RB (Lines) Type CM08RB (4Lines) Type FERRITE PRODUCTS Unit: mm (inch) PART NUMBERS Ordering code TLF9UBH30W TLF9UB 30W TLF9UBH80W TLF9UB 80W TLF9UBH03W TLF9UB 03W No. of lines heidc hai hvi hmei hkei hahi resistance Rated current Rated voltage Insulation resistance Impedance h Li (max.) (max.) D.C. (min.) (Reference values) U0(at 1MHz) U40(at 700kHz) U10(at 00kHz) Ordering code No.of lines hahi hat 1kHzi hei Impedance (typical) hei DC resistance (max.) hai Rated current (max.) hvi Rated voltage D.C. hmei Insulation resistance (min.) CM0RA CM0RA06 BU08RA11 BU08RA BU08RA16 CM08RA17 CM08RA CM08RA0 CM1RA CM1RA0 CM0RB01 CM0RB CM0RB0 CM0RB03 CM08RB01 CM08RB0 CM08RB08 CM08RB CM08RB04 CM08RB0 CM08RB03 CM08RB min 1.1min 0.min 1.0min 6.0min 10min 7.0min 60.0min 1.0min 40.0min 1.0min 600min 1.0min 6.0min 10.0min 700 (at 00MHz) 1000 (at 0MHz) 100 (at 00MHz) 000 (at 80MHz) 00 (at 00MHz) 000 (at 80MHz) 700 (at 70MHz) 1000 (at 10MHz) 1400 (at 100MHz) 00 (at 30MHz) 000 (at 0MHz) 9000 (at MHz) 000 (at 70MHz) 40 (at 100MHz) 1000 (at 0MHz) 1400 (at 6MHz) Selection Guide Part Numbers Electrical Characteristics Packaging Reliability Data Precautions P.10 P.381 P.38 P.387 P.388 AAAAAA etc 381

3 38 ELECTRICAL CHARACTERISTICS

4 RELIABILITY DATA 1/3 COMMON MODE CHOKE COIL ffor AC, DC LINESg Item 1.Operating Temperature Range CMKRA/BUKRA K to J11C Specified Value CMKRB TLF9U,TLF1U K to J11C TLFRA K to J10C *Including self-generated heat Test Methods and Remarks.Storage Temperature Range K40 to J8C K40 to J8C K40 to J8C EEEEE 3.Rated Voltage Within the specified tolerance TLF9UA, 0 VAC TLF1UA, TLF1UBD0VAC TLF9UBD0VDC 4.Insulation Resistance Between wires 100 ME min 100 ME min 100 ME min Applied voltage: Rated voltage(cmkra/bu RA, CMKRB) 00 VDC (TLF9UA, 1UA, 1UB,RA) Between wire and core.dc Resistance 6. EEEEE Within the specified tolerance Within the specified tolerance 100 ME min. Within the specified tolerance Within the specified tolerance EEEEE Within the specified tolerance Within the specified tolerance 0 VDC (TLF9UB) Duration: 60 sec. Applied voltage: 00 VDC (TLF9UA, 1UA, 1UB ) 0 VDC (TLF9UB) Duration: 60 sec. Measuring equipment: DC ohmmeter CMKRA/BU RA, CMKRB Measuring equipment: 46A(HP) or its equivalent Measuring frequency: 1 khz TLF9UA, 1U, RA FERRITE PRODUCTS Measuring equipment: Impedance analyzer(hp) ot its equivalent. Measuring frequency: 1 khz Measureing Voltage: 0.3Vosc 7.Rated Current Within the specified tolerance Within the speci- Within the speci- CMKRA/BU RA, CMKRB fied tolerance fied tolerance The maximum DC value as detailed in individual specifications. TLF9UA, 1UA, 1UB, RA The maximum AC value having temperature increase within 4C by the application of AC current. TLF 9UB The maximum DC value having temperature increase within 4C by the application of DC current. 8.Withstanding Between Applied voltage: Specified Voltage 0V DC (CMKRA/BU RA, CMKRB) Voltage wires 000 VAC (TLF9UA, 1UA, 1UB,RA) 00 VDC (TLF9UB) Duration: 60 sec. Between Applied voltage: 000 VAC (TLF9UA, 1UA, 1UB ) wire and 00 VDC (TLF9UB) core Duration: 60 sec. 9.Terminal Tensile Force CMKRA/BU RA,CM RB Strength Fix the component in the direction to draw terminal and gradually apply tensile force as detailed in individual specifications. TLF9UA,9UB Apply the stated tensile force gradually in the direction to draw terminal. Nominal wire diameterbd Tensile force Duration hmmi hni hsi B0.6 30M TLF1UA, 1UB Nominal wire diameterbd Tensile force Duration hmmi hni hsi B M TLFRA Apply the tensile force of 10N in the direction to draw terminal for seconds. 10.Resistance to Vibration Appearance: No According to JIS C Vibration Type: A M% Vibration Direction: hrs each in X,Y, and Z directions Total : 6 hrs Frequency range: 10 to to 10Hz(1 min.) M1% EEEEE Amplitude : 1.mm(shall not exceed acceleration of 196m/s ) Mounting method: Soldering onto printed board Recovery: 4V4 hrs of recovery under the standard condition after the removal from test chamber.(cm-ra,cm-rb) 1 or more hrs of recovery under the standard condition after the removal from test chamber, measure within hrs.(trf9u, TLF1U) 389

5 RELIABILITY DATA /3 COMMON MODE CHOKE COIL ffor AC, DC LINESg Item 11.Solderability Specified Value CMKRA/BUKRA CMKRB TLF9U,TLF1U At least 7% of terminal electrode is Solder shall be TLFRA Solder shall be Test Methods and Remarks CMKRA/BUKRA,CMKRB covered by new solder. uniformly adhered uniformly adhered Solder temperature: 3MC onto immersed onto immersed Duration: M0. sec. surfaces. surfaces. Immersion depth: According to detailed specification. TLF9U,TLF1U,TLFRA 1.Resistance to Soldering Heat Appearance: Solder temperature: 30MC Duration: M0. sec. Immersion depth: Up to 1.0 to 1. mm from PCB mounted level. CMKRA/BU RA,CMKRB M1% M% M% Solder temperature: 60MC Duration: M0. sec. Immersion depth: Up to V.mm from terminal root. Recovery: 4V4 hrs of recovery under the standard condition after the test. TLF9U,TLF1U,TLFRA Solder temperature: 60MC Duration: M1 sec. Immersion depth: Up to 1.0 to 1. mm from PCB mounted level Recovery: At least 1 hr of recovey under the standard condition after the test, followed by the measurement within hrs. FERRITE PRODUCTS 13.Thermal Shock Appearance: According to JIS C 00 M1% Conditions for 1 cycle M1% M1% Step Temperature(C) Duration (min.) 1 KM3 30M3 Room temperature Within 3 3 J8M 30M3 4 Room temperature Within 3 Number of cycles: 10 Recovery: 4V4 hrs of recovery under the standard condition after the removal from test chamber fcm-rag 1V hrs of recovery under the standard condition after the removal from test chamber fcm-rbg 14.Damp Heat (steady state) change: change: TLF9U,TLF1U,TLFRA Within M1% Within M1% Temperature: 60MC Humidity: 90 to 9% Duration: 00 hrs Recovery: At least 1 hr of recovey under the standard condition after the removal from test chamber, followed by the measurement within hrs. 1.Loading under Damp Heat Appearance: M1% Withstanding voltage: No Withstanding voltage: CMKRA/BUKRA,CMKRB Temperature: 40MC Insulation resis- Humidity: 90V9LRH Insulation tance: No abnor- J1 Duration: 00 K 0 hrs resistance: No mality Applied current: Rated current Recovery: 4V4 hrs of recovery under the standard condition after the removed from test chamber fcm-rag 1V hrs of recovery under the standard condition after the removed from test chamber fcm-rbg TLF9U,TLF1U,TLFRA Temperature: 60MC Humidity: 90 to 9% Duration: 100 hrs Applied voltage: Apply the following specified voltage between windings. TLF9UA,1UA,1UB, RA 0 VAC TLF9UB 0 VDC Recovery: At least 1 hr of recovey under the standard condition after the removal from test chamber, followed by the measurement within hrs. 391

6 RELIABILITY DATA 3/3 COMMON MODE CHOKE COIL ffor AC, DC LINESg Item 16.High Temperature Life Specified Value CMKRA/BU RA CM RB TLF9U,TLF1U Appearance: TLFRA Test Methods and Remarks CMKRA/BUKRA,CMKRB Test M1% Temperature: 8MC M1% M1% J1 Duration: 00 K 0 hrs Recovery: 4V4 hrs of recovery under the standard condition after the removal from test chamber fcm-rag 1V hrs of recovery under the standard condition after the removal from test chamber fcm-rbg TLF9U,TLF1U,TLFRA Temperature: 8MC 17.High Temperature Loading Test Withstanding voltage: No Insulation resistance: No Withstanding voltage: No Insulation resistance: No Duration: 00 hrs Recovery: At least 1 hr of recovey under the standard condition after the removal from test chamber, followed by the measurement within hrs. TLF9U,TLF1U,TLFRA Temperature: 8MC Duration: 100 hrs Applied voltage: Apply the following spefied voltage between windings. TLF9UA,1UA,1UB, RA 0 VAC TLF9UB 0 VDC Recovery: At least 1 hr of recovey under the standard condition after the re- FERRITE PRODUCTS moval from test chamber, followed by the measurement within hrs. 18.Low Temperature Life Test Appearance: No Abnormality CMKRA/BUKRA,CM RB M1% Temperature: K40M3C M1% M1% J1 Duration: 00 K 0 hrs Recovery: 4V4 hrs of recovery under the standard condition after the removal from test chamber fcm-rag 1V hrs of recovery under the standard condition after the removal from test chamber fcm-rbg TLF9U,TLF1U,TLFRA Temperature: -MC Duration: 00 hrs Recovery: At least 1 hr of recovey under the standard condition after the removal from test chamber, followed by the measurement within hrs. 19.Temperature Rise 4C max. 4C max. TLF9U,TLF1U,TLFRA Resistance substitution method Applied current: Rated current Duration: 1 hr Note on standard condition: "standard condition" referred to herein is defined as follows: to 3C of temperature, 4 to 8% relative humidity and 86 to 106kPa of air pressure. When there are questions concerning measurement results: In order to provide correlation data, the test shall be conducted under condition of 0MC of temperature, 6 to 70% relative humidity and 86 to 106kPa of air pressure. Unless otherwise specified, all the tests are conducted under the "standard condition." 393

7 PACKAGING Standard quantity CM / BU Type Type fpcs.g Standard quantity Box Bulk CM0RA06 B 00 CM0RBGG 1000 B CM08RAGG B 0 CM08RBGG 00 B CM1RA0 B 100 BU08RAGG B 00 TLF Type fpcs.g Type Standard quantity Box TLF9UAG 00 TLF9UBG 00 TLF1UG 00 TLFRA 00 FERRITE PRODUCTS 387

Notice for TAIYO YUDEN products

Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 008. All of the contents specified herein are