COMMUNICATIONS GALLIFORD TRY COMMUNICATIONS - PRODUCT BROCHURE JULY 2005

Size: px

Start display at page:

Download "COMMUNICATIONS GALLIFORD TRY COMMUNICATIONS - PRODUCT BROCHURE JULY 2005"

Edwina Francis
5 years ago
Views:

1 COMMUNICATIONS GALLIFORD TRY COMMUNICATIONS - PRODUCT BROCHURE JULY 2005 Wolvey Hinckley Leicestershire LE10 3JF United Kingdom Tel: + 00 (44) Fax: + 00 (44)

Contents Introduction... 2 Pre-fabricated Greenfield Solutions... 3 GF Specification Matrix... 5 GF Decision Guide... 6 Model GF 1... 7 Model GF 2... 9 Model GF 3... 11 Model GF 4.

.. 33 RT Specification Matrix... 35 RT Decision Guide... 36 Model RT 1... 37 Model RT 2... 40 Model RT 4... 43 Model RT 5... 45 Model RT 6... 47 Model RT 7... 49 Other Solutions.

2 Contents Introduction... 2 Pre-fabricated Greenfield Solutions... 3 GF Specification Matrix... 5 GF Decision Guide... 6 Model GF Model GF Model GF Model GF Model GF Model GF Model GF Model GF Model GF Model GF Model GF Model GF Model GF Pre-fabricated Rooftop Solutions RT Specification Matrix RT Decision Guide Model RT Model RT Model RT Model RT Model RT Model RT Other Solutions Streetworks Monopole Streetworks Monopole for use with CCTV Streetworks Monopole for Lighting Columns Flag Pole Solution UK Locations Key Contacts General Notes Contents

Introduction is a leading multi-disciplined organisation capable of carrying out all aspects of the infrastructure build for the mobile telecommunications industry.

innovations such as our flagpole solution.

3 Introduction is a leading multi-disciplined organisation capable of carrying out all aspects of the infrastructure build for the mobile telecommunications industry. In conjunction with our infrastructure work on base station network roll-outs we are continually developing innovative products reducing cost and timescales whilst improving quality of service. This product brochure details our innovative products from rapid deployment of permanent and temporary greenfield site solutions, rooftop solutions to other innovations such as our flagpole solution. All of the products listed suit the various mobile operator requirements as well as current market needs in reducing cost but maintaining service and quality. Each product is capable of demonstrating specific savings in certain conditions. We pride ourselves on our high levels of co-operation, pro-activeness and partnering; we will therefore work closely with our customers to develop any further solutions or innovations. 2 Introduction

4 PRE-FABRICATED GREENFIELD SOLUTIONS Pre-fabricated Greenfield Solutions

Pre-fabricated Greenfield Solutions All of the following Greenfield products listed will suit the various mobile operator requirements for pre-fabricated solutions, as

Our central storage location enables us to ensure rapid procurement on a site-to-site basis, whilst our manufacturing process delivers quality structures at the most

Suitable for re-deployment and re-use if required. Further cost savings on temp track way. Minimal client management. Ensures greater tolerance and quality.

5 Pre-fabricated Greenfield Solutions All of the following Greenfield products listed will suit the various mobile operator requirements for pre-fabricated solutions, as well as current market needs in reducing cost whilst maintaining service and quality. Our central storage location enables us to ensure rapid procurement on a site-to-site basis, whilst our manufacturing process delivers quality structures at the most advantageous prices. General solution benefits include: Very economic compared to traditional. Cost effective permanent sites. Quick to deploy. Suitable for re-deployment and re-use if required. Further cost savings on temp track way. Minimal client management. Ensures greater tolerance and quality. Used anywhere as a greenfield site. Reduced / minimal design required. Small compound area. Complies with GDPO planning and emergency powers. Useful in sensitive planning areas. Supports a full range of mast types. For use in all wind areas. Generator or REC electricity supply. 4 Greenfield Solutions

6 GF Specification Matrix 5 ONE USER = 6 no. antenna and 2 no. dishes * Note: GF1-3 no. antenna and 2 no. dishes Specification Matrix

7 GF Decision Guide 6 Decision Guide

Model GF 1 Description: This solution consists of a steelwork platform with pre-cast concrete blocks supporting both the monopole and cabinets.

8 Model GF 1 Description: This solution consists of a steelwork platform with pre-cast concrete blocks supporting both the monopole and cabinets. A permanent non-ground intrusive site for single pole use. towers are preferred for efficiency, to reduce cost and as a one-stop-solution delivered to site other operator approved structures can be accommodated. (Patent Pending No: ). Specification: Compound Size: 3 m x 3 m Height: Equipment: Accommodation: 15 m 3 no. antennae 2 no. Ø 600 dishes 1 no. Ø 300 dish Equipment cabinets Finish: Steelwork galvanised to BS EN 1461 Fence: General: Lead time: 1.8 m high chainlink fence plus 3 strands barbed wire. Alternatively Dirickx or Palisade fencing can be used. 4 weeks 7 Deployment: 1 day Model GF 1

9 Model GF 1 / continued 8 Model GF 1

10 Model GF 2 Description: A cost effective, free-standing permanent tower support structure, which is non-ground intrusive The steelwork support structure is capable of supporting towers up to a maximum height of 20m. The cabins are situated on precast concrete plinths, or alternatively jackpads, adjacent to the tower support. towers are preferred for efficiency, to reduce cost and as a one-stop solution delivered to site, however other operator approved structures can be accommodated. Specification: Compound Size: 8.0 m x 6.0 m Height: Equipment: Accommodation: Up to 20 m Up to 9 no. antennaee 2 no. Ø 600 dishes Medium cabin or cabinets Finish: Steelwork galvanised to BS EN 1461 Fence: General: Lead time: 1.8 m high chainlink fence plus 3 strands barbed wire. Alternatively Dirickx or Palisade fencing can be used. 4 weeks 9 Deployment: 1 day Model GF 2

11 Model GF 2 / continued 10 Model GF 2

12 Model GF 3 Description: This solution consists of a steelwork platform with pre cast concrete blocks supporting both the tower and cabinet(s). A permanent, non-ground intrusive, pre-fabricated site suitable for a single user. Supports towers up to a height of 30 m. towers are preferred for efficiency, to reduce cost and as a one-stop-solution delivered to site, however other operator approved structures can be accommodated. Specification: Compound Size: Height: Equipment: Accommodation: At 15 m m x 3.5 m At 20 m m x 4.7 m At 25 m m x 5.9 m At 30 m m x 6.5 m Up to 30 m Up to 9 no. antennae 2 no. Ø 600 dishes Small cabin / cabinets Finish: Steelwork galvanised to BS EN 1461 Fence: General: Lead time: Deployment: 1.8 m high chainlink fence plus 3 strands barbed wire. Alternatively Dirickx or Palisade fencing can be used. 4 weeks 3 days 11 Model GF 3

13 Model GF 3 / continued 12 Model GF 3

Model GF 4 Description: This solution consists of a steelwork platform with pre cast concrete blocks supporting both the tower and one medium size cabin.

14 Model GF 4 Description: This solution consists of a steelwork platform with pre cast concrete blocks supporting both the tower and one medium size cabin. A permanent non-ground intrusive site for single pole use. towers are preferred for efficiency, to reduce cost and as a one-stop-solution delivered to site, however other operator approved structures can be accommodated. Specification: Compound Size: At 15 m m x 4.9 m At 20 m m x 4.9 m At 25 m m x 5.8 m At 30 m m x 5.8 m Height: Equipment: Accommodation: Up to 30 m Up to 9 no. antennae 2 no. Ø 600 dishes Medium size cabin Finish: Steelwork galvanised to BS EN 1461 Fence: 1.8 m high chainlink fence plus 3 strands barbed wire. Alternatively Dirickx or Palisade fencing can be used. General: Lead time: Deployment: 4 weeks 3 days 13 Model GF 4

15 Model GF 4 / continued 14 Model GF 4

16 Model GF 5 Description: A permanent, non-ground intrusive, pre-fabricated site suitable for a single user. The site consists of a steelwork platform with pre-cast concrete blocks supporting both the tower and one large size cabin. Supports towers with a maximum of six antennae and two dishes up to a height of 30 m. Platform size at 15 m is approximately 8 m x 6 m. Specification: Compound Size: 8.1 m x 6.4 m Height: Equipment: Accommodation: Up to 30 m Up to 9 no. antennae 2 x 600 m dishes Large cabin or cabinets Finish: Steelwork galvanised to BS EN 1461 Fence: General: Lead time: Deployment: 1.8m high chainlink fence plus 3 strands of barbed wire. Alternatively Dirickx or Palisade fencing can be used. 4 weeks 1 day 15 Model GF 5

17 Model GF 5 / continued 16 Model GF 5

18 Model GF 6 Description: This solution is a permanent, non-ground intrusive, pre-fabricated site which is suitable for a one user monopole, extendable to two users. Maximum height above ground level is 20 m with second user. The structure can support a maximum of two sets of six antennae and two dishes complete with one LNA per antennae, up to a maximum height of 20 m. The steelwork platform is capable of supporting two environmental cabinets. Specification: Compound Size: 6 m x 2 m Height: Equipment: Accommodation: 15 m 2 sets of 6 no. antennae (1 LNA per antennae) 2 sets of 2 no. Ø 600 dishes 2 no. environmental cabinets Finish: Steelwork galvanised to BS EN 1461 Fence: General: Lead time: Deployment: 1.8 m high chainlink fence plus 3 strands barbed wire. Alternatively Dirickx or Palisade fencing can be used. 4 weeks 3 days 17 Model GF 6

19 GALLIFORD TRY COMMUNICATIONS - PRODUCT BROCHURE Model GF 6 / continued 18 Model GF 6

Model GF 7 Description: This solution is a permanent, non-ground intrusive, prefabricated site which is suitable for a one user monopole, extendable to two users.

20 Model GF 7 Description: This solution is a permanent, non-ground intrusive, prefabricated site which is suitable for a one user monopole, extendable to two users. Maximum height above ground level is 20 m with second user. The structure can support a maximum of two sets of six antennae and two dishes complete with one LNA per antennae, up to a maximum height of 20 m. The steelwork platform is capable of supporting two environmental cabinets. Specification: Compound Size: 6 m x 3 m at 20 m Height: Equipment: Accommodation: Up to 20 m 2 sets of 6 no. antennae (1 LNA per antennae) 2 sets of 2 no. Ø 600 dishes 2 no. environmental cabinets Finish: Steelwork galvanised to BS EN 1461 Fence: 1.8 m high chainlink fence plus 3 strands barbed wire. Alternatively Dirickx or Palisade fencing can be used. General: Lead time: Deployment: 4 weeks 3 days 19 Model GF 7

21 Model GF 7 / continued 20 Model GF 7

22 Model GF 8 Description: This solution consists of a steelwork platform with pre-cast concrete blocks supporting both the monopole and cabinets. A permanent non-ground intrusive site for single pole use. towers are preferred for efficiency, to reduce cost and as a one-stop-solution delivered to site, however other operator approved structures can be accommodated. Specification: Compound Size: 6 m x 4.0 m Height: Equipment: Accommodation: 15 m 3 no. antennae 2 no. Ø 600 dishes 1 no. Ø 300 dish Equipment cabinets Finish: Steelwork galvanised to BS EN 1461 Fence: General: Lead time: Deployment: 1.8 m high chainlink fence plus 3 strands barbed wire. Alternatively Dirickx or Palisade fencing can be used. 4 weeks 1 day 21 Model GF 8

23 Model GF 8 / continued 22 Model GF 8

24 Model GF 9 Description: This solution is a permanent, non-ground intrusive, pre-fabricated site which is suitable for a one user monopole, extendable to two users. Maximum height above ground level is 20 m with second user. The structure can support a maximum of two sets of six antennae and two dishes complete with one LNA per antennae, up to a maximum height of 20 m. The steelwork platform is capable of supporting two environmental cabinets. Specification: Compound Size: 7.6 m x 5.0 m Height: Equipment: Accommodation: Up to 20 m 2 sets of 6 no. antennae (1 LNA per antennae) 2 sets of 2 no. Ø 600 dishes 2 no. environmental cabinets Finish: Steelwork galvanised to BS EN 1461 Fence: General: Lead time: Deployment: 1.8 m high chainlink fence plus 3 strands barbed wire. Alternatively Dirickx or Palisade fencing can be used. 4 weeks 3 days 23 Model GF 9

25 Model GF 9 / continued 24 Model GF 9

Model GF 10 Description: The steelwork platform supports the GTC tower structure only with the cabins supported by either pre cast concrete plinths or jackpads on ground floor adjacent to steelwork

26 Model GF 10 Description: The steelwork platform supports the GTC tower structure only with the cabins supported by either pre cast concrete plinths or jackpads on ground floor adjacent to steelwork platform. A permanent, non-ground intrusive site, to accommodate a multi-user tower. Specification: Compound Size: Height: Equipment: Accommodation: 13.8 m x 13.8 m Up to 30 m 4 sets of 6 no. antennae (1 LNA per antennae) 4 sets of 2 no. Ø 600 dishes Any size cabin or cabinets Finish: Steelwork galvanised to BS EN 1461 Fence: General: Lead time: Deployment: 1.8 m high chainlink fence plus 3 strands barbed wire. Alternatively Dirickx or Palisade fencing can be used. 4 weeks 3 days 25 Model GF 10

27 Model GF 10 / continued 26 Model GF 10

28 Model GF 11 Description: The pre-fabricated solution supports the multi-user tower structure and also accommodates all operator equipment cabins. Specification: Compound Size: Height: Equipment: Accommodation: 9.3 m x 9.3 m Up to 48 m 4 sets of 6 no. antennae (1 LNA per antennae) 4 sets of 2 no. Ø 600 dishes Up to four cabins or cabinets Finish: Steelwork galvanised to BS EN 1461 Fence: General: Lead time: Deployment: 1.8 m high chainlink fence plus 3 strands barbed wire. Alternatively Dirickx or Palisade fencing can be used. 4 weeks 3 days 27 Model GF 11

29 Model GF 11 / continued 28 Model GF 11

Model GF 12 Description: This solution is a permanent, pre-fabricated steel platform that accommodates the mast, cabin/cabinets and all associated ancillaries as a finished fenced compound.

30 Model GF 12 Description: This solution is a permanent, pre-fabricated steel platform that accommodates the mast, cabin/cabinets and all associated ancillaries as a finished fenced compound. The platform is in turn supported by steel spin piles driven into the ground. The steelwork platform supports a one user tower structure, up to 20 m, as a permanent solution (heights up to 60 m can be accommodated on application). Specification: Compound Size: At 15 m m x 3.6 m At 20 m m x 3.6 m Height: Equipment: Accommodation: Up to 20 m Up to 9 no. antennae 2 no. Ø 600 dishes Equipment cabin or cabinets Finish: Steelwork galvanised to BS EN 1461 Fence: General: Lead time: 1.8 m high chainlink fence plus 3 strands barbed wire. Alternatively Dirickx or Palisade fencing can be used. 4 weeks 29 Deployment: 2 days Model GF 12

31 Model GF 12 / continued 30 Model GF 12

32 Model GF 13 Description: The spin pile foundation is again adopted for this solution. The mast and cabinets however are fixed onto separate steel platforms. These are then supported by the steel spin piles. The platforms are housed within a traditional compound. The steelwork platforms support a one user tower structure, up to 20 m, as a permanent solution (heights up to 60 m can be accommodated on application). Specification: Compound Size: Height: Equipment: Accommodation: At 15 m m x 4.5 m At 20 m m x 4.5 m Up to 20 m Up to 9 no. antennae 2 no. Ø 600 dishes Equipment cabin or cabinets Finish: Steelwork galvanised to BS EN 1461 Fence: General: Lead time: Deployment: 1.8 m high chainlink fence plus 3 strands barbed wire. Alternatively Dirickx or Palisade fencing can be used. 4 weeks 2 days 31 Model GF 13

33 Model GF 13 / continued 32 Model GF 13

34 PRE-FABRICATED ROOFTOP SOLUTIONS Pre-fabricated Rooftop Solutions

Pre-fabricated Rooftop Solutions This section of the product brochure details our innovative products for rapid deployment of permanent and temporary rooftop solutions.

The predominant feature is that they can all be deemed off the shelf products as they are pre-fabricated and are also non-roof intrusive. This leads to reduced procurement times and deployment.

Each product is capable of demonstrating specific savings in certain conditions. General solution benefits include: Quick to deploy. Cost effective, compared to traditional.

35 Pre-fabricated Rooftop Solutions This section of the product brochure details our innovative products for rapid deployment of permanent and temporary rooftop solutions. The solutions offer many benefits over traditional methods and collectively they all have a major effect on the cost of the project. The predominant feature is that they can all be deemed off the shelf products as they are pre-fabricated and are also non-roof intrusive. This leads to reduced procurement times and deployment. All of the products listed can suit the client s requirements as well as current market needs in reducing cost but maintaining service and quality. Each product is capable of demonstrating specific savings in certain conditions. General solution benefits include: Quick to deploy. Cost effective, compared to traditional. Components can be manhandled into position on rooftop. Reduced design and client management. Supports a full range of antennae types. Easily retractable / adjustable to provide easy maintenance. Ensures greater tolerance and quality. For use in a wide range of areas to suit various wind loads. Non-roof intrusive. Useful in sensitive planning areas. No requirement for concrete plinths or to penetrate existing roof. 34 Pre-fabricated Rooftop Solutions

36 RT Specification Matrix 35 RT Decision Guide

37 RT Decision Guide 36 RT Decision Guide

Model RT 1 Description: The antennae support pole, as an additional option, can be lowered via a winch mechanism allowing the user to service the equipment without the need to climb.

38 Model RT 1 Description: The antennae support pole, as an additional option, can be lowered via a winch mechanism allowing the user to service the equipment without the need to climb. For maintenance this solution has been designed to be climbable or retractable dependant on the operator equipment requirements. Model RT1 has been designed for rooftops up to 50 m in height, for use in all wind areas. Specification: Footprint: Height: Equipment: Accommodation: 2 m x 2 m 4 m 3 no. antennae 1 no. Ø 600 dish Site specific Finish: Steelwork galvanised to BS EN 1461 General: Lead time: 4 weeks 37 Deployment: Deployment of the solution is dependant on the structural adequacy of existing roof. Model RT 1

39 Model RT 1 / continued 38 Model RT 1

40 Model RT 1 / continued 39 Model RT 1

Model RT 2 Description: The platform is adjustable to suit the existing roof structural members between 4.5 m and 6.9 m. The base arms are retractable as well as horizontally adjustable from 60 to 90.

41 Model RT 2 Description: The platform is adjustable to suit the existing roof structural members between 4.5 m and 6.9 m. The base arms are retractable as well as horizontally adjustable from 60 to 90. For maintenance this solution has been designed to be climbable or retractable dependant on the operator equipment requirements. RT2 has been designed for rooftops up to 50 m in height, for use in all wind areas. Specification: Footprint: Height: Equipment: 5 m x 5 m 4.5 m 3 no. antennae 1 no. Ø 600 dish Accommodation: Site specific Finish: Steelwork galvanised to BS EN 1461 General: Lead time: Deployment: 4 weeks Deployment of the solution is dependant on the structural adequacy of existing roof. 40 Model RT 2

42 Model RT 3 Description: A free-standing, lightweight, rapid deployment solution which supports a range of cabinets. It allows the weight to be evenly distributed over a small area and is nonroof intrusive. The platform can be adjustable to accommodate various cabinet types which can be maintained easily from the platform itself. This solution has been designed for rooftops up to 50 m in height. Specification: Footprint: Height: Equipment: Accommodation: 1.9 m x 2.4 m < 2.0 m 1 no. cabinet or small cabin Site specific Finish: Steelwork galvanised to BS EN 1461 General: Lead time: Deployment: 4 weeks Deployment of the solution is dependent on the structural adequacy of existing roof. 41 Model RT 3

43 Model RT 3 / continued 42 Model RT 3

44 Model RT 4 Description: This solution has been designed for rooftops up to 50 m in height for use in all wind areas. The antennae support pole, as an additional option, can be lowered via a winch mechanism allowing the user to service the equipment without the need to climb, although, this solution can also be climbable. Specification: Footprint: Height: Equipment: Accommodation: N/A 4 m 3 no. antennae Site specific Finish: Steelwork galvanised to BS EN 1461 General: Lead time: 4 weeks Deployment: Deployment of the solution is dependent on the structural adequacy of existing roof. 43 Model RT 4

45 Model RT 4 / continued 44 Model RT 4

46 Model RT 5 Description: A wall-mounted rooftop pole that is retractable and can accommodate a vast range of antennae types. For maintenance this solution has been designed to be climbable or retractable dependant on the operator equipment requirements. This solution has been designed for rooftops up to 50 m in height. Specification: Footprint: N/A Height: Equipment: Accommodation: 4 m 3 no. antennae Site specific Finish: Steelwork galvanised to BS EN 1461 General: Lead time: Deployment: 4 weeks Deployment of the solution is dependent on the structural adequacy of existing roof. 45 Model RT 5

47 Model RT 5 / continued 46 Model RT 5

48 Model RT 6 Description: An antennae support structure that allows the equipment to be maintained safely behind a parapet wall. A retractable, free-standing platform which can accommodate a range of antennae. This solution has been designed for rooftops up to 50 m in height for use in all wind areas. Specification: Footprint: Height: Equipment: Accommodation: N/A Site specific 1 no. antennae Site specific Finish: Steelwork galvanised to BS EN 1461 General: Lead time: Deployment: 4 weeks Deployment of the solution is dependent on the structural adequacy of existing roof. 47 Model RT 6

49 Model RT 6 / continued 48 Model RT 6

This solution has been designed for rooftops up to 50 m in height for use in all wind areas.

50 Model RT 7 Description: An antennae support structure that allows the equipment to be maintained safely behind a parapet wall. A retractable, parapet mounted support structure which can accommodate a range of antennae. This solution has been designed for rooftops up to 50 m in height for use in all wind areas. Specification: Footprint: N/A Height: Equipment: Accommodation: Site specific 1 no. antennae Site specific Finish: Steelwork galvanised to BS EN 1461 General: Lead time: 4 weeks Deployment: Deployment of the solution is dependent on the structural adequacy of existing roof. 49 Model RT 7

51 Model RT 7 / continued 50 Model RT 7

52 OTHER SOLUTIONS Other Solutions

Other Solutions This section of the brochure details solutions particularly suited to urban environments, such as general streetwork monopoles, lighting columns and flagpole solutions.

53 Other Solutions This section of the brochure details solutions particularly suited to urban environments, such as general streetwork monopoles, lighting columns and flagpole solutions. Obviously, there is an increasing requirement to provide ground based inner city solutions that blend in with the environment, this range of solutions compliment this need both adequately and cost effectively. Additionally, these structures can be further disguised if planning restrictions dictate, examples include: timber effect telegraph poles, shrouded chimney poles etc. To discuss these further please refer to the contacts list on page Other Solutions

54 Streetworks Monopole Description: The streetworks monopole is a secure telecom tower that blends in with a typical urban environment. An economic, slimline, pre-fabricated solution that supports antennae and dishes. The monopole is capable of supporting one user and three antennae and one dish (unless lease line). Access for maintenance is by a cherrypicker only. Specification: Heights: 15 m 22.5 m 17.5 m 25 m 20 m 30 m Equipment: Technical Info: General: Includes: 3 no. antennae 2 no. 600 mm dishes 1 no. 300 mm dish Designed to: ILETR7 / BS6399 Basic wind speed: 25 m/s Height above sea level: 200 m Terrain category: III Standard finish: hot dipped galvanised to BS1461 Width at top: 406 mm mm Width at bottom: 650 mm mm Holding down bolts and template, monopole ladder (full height), ladder guard, latchway fall arrest, SPH headframe, microwave dish mounts and lightning finial as standard. 53 Streetworks Monopole

55 Streetworks Monopole / continued 54 Streetworks Monopole

Streetworks Monopole for use with CCTV Description: This streetworks solution is a secure telecom tower that blends in with a typical urban environment and is retraceable to allow easier maintenance.

56 Streetworks Monopole for use with CCTV Description: This streetworks solution is a secure telecom tower that blends in with a typical urban environment and is retraceable to allow easier maintenance. An economic, slimline, pre-fabricated monopole that supports microcell antennae. Specification: Heights: 15 m 22.5 m 17.5 m 25 m 20 m 30 m Equipment: Technical Info: General: Includes: 3 no. antennae 2 no. 600 mm dishes 1 no. 300 mm dish Designed to: ILETR7 / BS6399 Basic wind speed: 25 m/s Height above sea level: 200 m Terrain category: III Standard finish: hot dipped galvanised to BS1461 Width at top: 406 mm mm Width at bottom: 650 mm mm Holding down bolts and template, monopole ladder (full height), ladder guard, latchway fall arrest, SPH headframe, microwave dish mounts and lightning finial as standard. 55 Streetworks Monopole for use with CCTV

57 Streetworks Monopole for use with CCTV / continued 56 Streetworks Monopole for use with CCTV

58 Streetworks Monopole for Lighting Columns Description: A secure telecom tower that blends in with a typical urban environment and is retraceable to allow easier maintenance. The monopole is capable of supporting one microcell antennae. Equipment can be maintained by retracing the pole via cherrypicker access. An economic, slimline, pre-fabricated monopole that supports microcell antennae. Specification: Heights: 6 m 10 m 8 m 12 m Equipment: Technical Info: General: Includes: 3 no. antennae 2 no. 600 mm dishes 1 no. 300 mm dish Designed to: ILETR7 / BS6399 Basic wind speed: 25 m/s Height above sea level: 200 m Terrain category: III Standard finish: hot dipped galvanised to BS1461 Width at top: 406 mm mm Width at bottom: 650 mm mm Holding down bolts and template, monopole ladder (full height), ladder guard, latchway fall arrest, SPH headframe, microwave dish mounts and lightning finial as standard. 57 Streetworks Monopole for Lighting Columns

59 Streetworks Monopole for Lighting Columns / continued 58 Streetworks Monopole for use with CCTV

60 Flag Pole Solution Description: An alternative method of supporting antenna that blends in with a typical built-up environment. The monopole is capable of supporting three antennae s with the equipment being maintained by a cherrypicker or alternatively, a retracting pole may be used. An economic, slimline, pre-fabricated antennae support pole. Specification: Heights: Plant room height plus 4 m Equipment: Technical Info: General: Includes: 3 no. antennae Designed to: ILETR7 / BS6399 Basic wind speed: 25 m/s Height above sea level: 200 m Terrain category: III Standard finish: hot dipped galvanised to BS1461 Width at top: 406 mm mm Width at bottom: 650 mm mm Holding down bolts and template, monopole ladder (full height), ladder guard, latchway fall arrest, SPH headframe, microwave dish mounts and lightning finial as standard. 59 Flag Pole Solution

61 Flag Pole Solution / continued 60 Flag Pole Solution

62 UK Locations 61 UK Locations

63 Key Contacts General Simon Hyams Business Development Director T: M: E: Customer Support Neus Garriock Marketing Manager T: M: E: Prefabs & Structures Daren James Design Development Manager T: M: E: 62 Key Contacts

64 General Notes 63 General Notes

65 General Notes 64 operates a policy of continual product development and therefore reserves the right to change details and product specification without prior notice.

Delivering Reliability. Services. Strength You Can Count On. oldcastleprecast.com/services

Delivering Reliability. Services. Strength You Can Count On. oldcastleprecast.com/services Delivering Reliability A Strength You Can Count On SERVICES TENANT IMPROVEMENTS Above And Below Ground Solutions Strength You Can Count On Oldcastle Precast is well trained and knowledgeable in all aspects