Refer to E5AR/E5ER Operation for operating procedures.

Transcription

1 igital ontrollers R SM_R_S R igital ontrollers offer high speed, high precision, and multiple I/O and use a digit, row L display for high visual clarity. short sampling period of 0 ms enables use in applications requiring highspeed response. PV, SP, and MV data is displayed simultaneously in a row, negative L display with a backlight. Multipoint control, cascade control, and proportional control are possible with a single ontroller. When using models with ompoway/f communications, initial settings can be downloaded and settings can be masked using Support Software (XThermo version.0 or higher). quipped with calculation functions as a standard (e.g., square root calculation and brokenline approximation). evicenet ommunications ata setting and monitoring can be performed without any special programming. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Refer to Safety Precautions for s. Refer to R/R Operation for operating procedures. Number Structure Number Legend R@@@@@@@@@@@@ onstant values/program None: onstant values. ontrol method lank: Standard, or heating/cooling control P: Positionproportional control. Output R: PSTNO relay outputs Q: Pulse voltage and pulse voltage/current outputs : urrent and current outputs. Output lank:none R: Relay Q: Pulse voltage and pulse voltage/current outputs : urrent and current outputs Note: When your order, specify the power supply voltage.. lank:none : PSTNO relay outputs T: transistor outputs. Optional function lank:none : RS8 communications 7. Optional function lank:none : event inputs 8. Input : Universalinput and event inputs F: Universalinput and F W: Universalinput and universalinput 9. Input lank:none W: Universalinput and universalinput 0.ommunications Method lank:none FLK: ompoway/f RT: evicenet Note: The above model number legend is intended as a functional description of models. Not all possible combinations of functions are available. onfirm model availability in Ordering Information when ordering. The XThermo Support Software (version.0 or higher) can be used to easily set parameters in conversational form. Note: e sure to read the precautions for correct use and other precautions in the following user's manual before using the igital ontroller. R/R igital ontroller User s Manual (at. No. Z8) R/R igital ontroller evicenet ommunication User s Manual (at. No. H)

2 Ordering Information R igital ontrollers When your order, specify the power supply voltage. Standard ontrollers (00 to 0 V) Size ontrol type ontrol mode Outputs (control/ transfer) 8 9 mm asic control ( loop) Singleloop standard control Singleloop heating and cooling control loop control loop standard control Singleloop heating and cooling control Singleloop cascade control Singleloop control with remote SP Singleloop proportional control Positionproportional control ( loop) Singleloop positionproportional control (See note.) points: Pulse voltage points: urrent and urrent points: Pulse voltage points: urrent and urrent points: Pulse voltage points: urrent and urrent points: Pulse voltage and urrent ( points) points: Pulse voltage points: urrent and urrent Relay output ( open, closed) Relay output ( open, closed) and current (transfer) output uxiliary outputs (SU) Optional functions vent inputs Serial communications No RQ (See note.) RS8 R RQFLK RFLK RQTFLK RT FLK RQFLK (See note.) (See note.) RS8 RQTWFLK RTWFLK No RPRTF No RS8 RPRQFFLK Note : The auxiliary outputs are transistor outputs. : an be switched between close control and floating control. Standard ontrollers ( V/) Size ontrol type ontrol mode Outputs (control/ transfer) 8 9 mm asic control ( loop) Singleloop standard control Singleloop heating and cooling control loop control loop standard control Singleloop heating and cooling control Singleloop cascade control Singleloop control with remote SP Singleloop proportional control Positionproportional control ( loop) Singleloop positionproportional control (See note.) points: Pulse voltage points: urrent and urrent points: Pulse voltage and urrent ( points) points: Pulse voltage points: urrent and urrent Relay output ( open, closed) Relay output ( open, closed) and current (transfer) output uxiliary outputs (SU) Optional functions vent inputs Serial communications No RQ R RS8 RQFLK (See note.) (See note.) RS8 RQTWFLK RTWFLK No RPRTF No RS8 RPRQFFLK Note : The auxiliary outputs are transistor outputs. : an be switched between close control and floating control.

3 evicenetcompatible ontrollers (00 to 0 V) R Size 8 9 mm ontrol type asic control ( loop) loop control Positionproportional control ( loop) ontrol mode Singleloop standard control Singleloop heating and cooling control loop standard control Singleloop heating and cooling control Singleloop cascade control Singleloop standard control with remote SP Singleloop proportional control Singleloop positionproportional control (See note.) Outputs (control/ transfer) uxiliary outputs (SU) points: (See Pulse voltage note.) Pulse voltage/current points: urrent and urrent points: (See Pulse voltage note.) Pulse voltage/current points: urrent and urrent Relay output ( open, closed) (See note.) Optional functions vent inputs evicenet communications Yes RQTRT RTRT None Yes RQTWRT RTWRT None Yes RPRTFRT Note:. The auxiliary outputs are transistor outputs.. an be switched between close control and floating control. evicenetcompatible ontrollers ( V/) Size 8 9 mm ontrol type asic control ( loop) loop control Positionproportional control ( loop) ontrol mode Singleloop standard control Singleloop heating and cooling control loop standard control Singleloop heating and cooling control Singleloop cascade control Singleloop standard control with remote SP Singleloop proportional control Singleloop positionproportional control (See note.) Outputs (control/ transfer) uxiliary outputs (SU) points: (See Pulse voltage note.) Pulse voltage/current points: urrent and urrent points: (See Pulse voltage note.) Pulse voltage/current points: urrent and urrent Relay output ( open, closed) (See note.) Optional functions vent inputs evicenet communications Yes RQTRT RTRT None Yes RQTWRT RTWRT None Yes RPRTFRT Note:. The auxiliary outputs are transistor outputs.. an be switched between close control and floating control. Inspection Results The Inspection Report can be ordered at the same time as the igital ontroller using the following model number. Inspection Report (Sold Separately) escriptions Inspection Report for R RK ccessories (Order Separately) Terminal over (Sold Separately) escriptions Terminal over for R OV Rubber Packing Y9SP Note: The Rubber Packing is provided with the igital ontroller. Mounting dapters Y9H9 Note: These Mounting dapters are provided with the igital ontroller.

4 Specifications R Ratings Item Operating voltage range Supply voltage (See note.) Note : The supply voltage (i.e., 00 to 0 V or V/V) depends e sure to specify the required type when ordering. : The ontroller is equipped with multiple sensor input. Temperature input or analog input can be selected with the input type setting switch. There is basic insulation between power supply and input terminals, power supply and output terminals, and input and output terminals. : o not use an inverter output as the power supply. (Refer to Safety Precautions for s.) Input Ranges 00 to 0 V, 0/0 Hz V, 0/0 Hz; V 8% to 0% of rated supply voltage Power consumption 7 V max. (with maximum load) V/7 W max. (with maximum load) Sensor input (See note.) Thermocouple: K, J, T,, L, U, N, R, S,, W Platinum resistance thermometer: Pt00 urrent input: to 0 m, 0 to 0 m (including remote SP input) Voltage input: to V, 0 to V, 0 to 0 V (including remote SP input) (Input impedance: 0 Ω for current input, approx. MΩ for voltage input) ontrol output Voltage (pulse) output V, 0 m max. with shortcircuit protection circuit urrent output 0 to 0 m, to 0 m ; load: 00 Ω max. (including transfer output) (Resolution: pprox.,000 for 0 to 0 m ; pprox.,000 for to 0 m ) Relay output Positionproportional control type (open, closed) N.O., 0 V, (including inrush current) uxiliary output Relay Output N.O., 0 V, (resistive load) Transistor Output Maximum load voltage: 0 V; Maximum load current: 0 m; Residual voltage:. V max.; Leakage current: 0. m max. Potentiometer input 00 Ω to. kω vent input ontact Input ON: kω max.; OFF: 00 kω min. Nocontact Input ON: Residual voltage of. V max.; OFF: Leakage current of 0. m max. Short circuit current: pprox. m Remote SP input Refer to the information on sensor input. Transfer output Refer to the information on control output. ontrol method PI or ON/OFF control Setting method igital setting using front panel keys or setting using serial communications Indication method 7segment digital display and singlelighting indicator haracter Height PV: 9. mm; SV: 7. mm; MV: 7. mm Other functions epends on model. mbient operating temperature 0 to (with no icing or condensation) For years of assured use: 0 to 0 (with no icing or condensation) mbient operating humidity % to 8% Storage temperature to (with no icing or condensation) Platinum Resistance Thermometer, Thermocouple, urrent, or Voltage Input Input type Platinum Resistance Thermometer Thermocouple urrent Voltage Name Pt00 K J T L U N R S W [m] [V] W/Re Temperature Range ( ) Setting Minimum setting unit (SP and alarm) Input type to 0 to 0 The shaded area indicates the setting status at the time of purchase. to to 0 (epends on scaling and number of decimal places.) IN setting switch Set to T.PT. Set to NLOG. TYP T.PT NLOG T.PT IN TYP NLOG 0 to 0

5 haracteristics R Indication accuracy Thermocouple input with cold junction compensation: (±0.% of PV or ±, whichever is greater) ± digit max. (See note.) Thermocouple input without cold junction compensation: (±0.% FS or ±, whichever is smaller) ± digit (See note.) nalog input: ±0.% FS ± digit max. Platinum resistance thermometer input: (±0.% of PV or ±0., whichever is greater) ± digit max. Positionproportional potentiometer input: ±% FS ± digit max. ontrol mode Standard control (heating or cooling control), heating/cooling control, standard control with remote SP (input models only), heating/cooling control with remote SP (input models only), cascade standard control (input models only), cascade heating/cooling control (input models only), proportional control (input models only), positionproportional control (controlvalve control models only) Influence of temperature Thermocouple input (R, S,, W): (±% of PV or ±0, whichever is greater) ± digit max. Influence of temperature Other thermocouple input: (±% of PV or ±, whichever is greater) ± digit max. Ktype thermocouple at 00 max.: ±0 max. Influence of MS. Platinum resistance thermometer: (±% of PV or ±, whichever is greater) ± digit max. (at N) nalog input: (±%FS) ± digit max. ontrol period 0. to 99.0 s (in units of 0. s) for timeproportioning control output Proportional band (P) 0.00% to % FS (in units of 0.0% FS) Integral time (I) 0.0 to,999.9 s (in units of 0. s) erivative time () 0.0 to,999.9 s (in units of 0. s) Hysteresis 0.0% to 99.99% FS (in units of 0.0% FS) Manual reset value 0.0% to 00.0% (in units of 0.% FS) larm setting range 9,999 to 99,999 U (See note.) (The decimal point position depends on the input type and the decimal point position setting.) Input sampling period 0 ms Insulation resistance 0 MΩ min. (at 00 V) ielectric strength,000 V, 0/0 Hz for min (between charged terminals of different polarities) Vibration resistance 0 to Hz, 0 m/s for 0 min each in X, Y, and Z directions Shock resistance 00 m/s, times each in X, Y, and Z directions Inrush current 00 to 0V models: 0 max. V/V models: 0 max. Weight ontroller only: pprox. 0 g; Mounting bracket: pprox. 0 g; Terminal cover: pprox. g egree of protection Front panel: NMX for indoor use (equivalent to IP); Rear case: IP0; Terminals: IP00 Memory protection Nonvolatile memory (number of writes: 00,000) pplicable standards UL00, S. No. 00 N00 (I00): Pollution degree /overvoltage category M MI: N (See note.) Radiated Interference lectromagnetic Field Strength: N0 Group lass Noise Terminal Voltage: N0 Group lass MS: N (See note.) S Immunity: N000: kv contact discharge (level ) 8 kv air discharge (level ) lectromagnetic Immunity: N000: 0 V/m (amplitudemodulated, 80 MHz to GHz,. GHz to GHz) (level ) urst Noise Immunity: N000: kv power line (level ) kv output line (relay output) (level ) kv measurement line, I/O signal line (level ) kv communications line (level ) onducted isturbance Immunity: N000: V (0. to 80 MHz) (level ) Surge Immunity: N000: kv line to line (power line, output line (relay output)) (level ) kv line to ground (power line, output line (relay output)) (level ) Power Frequency Magnetic Field Immunity: N0008: 0 /m (0 Hz) continuous field Voltage ip/interrupting Immunity: N000: 0. cycle, 00% (rated voltage) Note:. K, T, or Ntype thermocouple at 00 max.: ± ± digit max. U or Ltype thermocouple: ± ± digit max. type thermocouple at 00 max.: No accuracy specification. R or Stype thermocouple at 00 max.: ± ± digit max. Wtype thermocouple: (±0.% of PV or ±, whichever is greater) ± digit max.. U or Ltype thermocouple: ± ± digit R or Stype thermocouple at 00 max.: ±. ± digit. U (ngineering Unit) represents the unit after scaling. If a temperature sensor is used it is either or F.. onditions: mbient temperature from 0 to to and voltage of % to 0% of rated voltage.. Industrial electromagnetic environment (N/I Table )

6 ommunications Specifications R Transmission path connection ommunications method Synchronization method aud rate Transmission code ata bit length Stop bit length evicenet Multiple points RS8 (twowire, half duplex) Startstop synchronization 9,00, 9,00, or 8,000 bps SII 7 or 8 bits or bits rror detection Vertical parity (none, even, odd) lock check character (): ompoway/f R: Modbus Flow control None Interface RS8 Retry function None ommunications buffer 7 bytes ommunications response send wait time 0 to 99 ms, efault: 0 ms Item Specifications ommunications protocol onforms to evicenet ommunications functions Remote I/O communications Masterslave connections (polling, bitstrobe, OS, or cyclic) onform to evicenet specifications. I/O allocations an allocate any I/O data from the onfigurator. an allocate any data, such as parameters specific to the evicenet, and the igital ontroller variable area. Up to blocks for the IN rea, up to a total of 00 words. One block for the OUT rea, up to 00 words (first word is always allocated to Output nable its). Message communications xplicit message communications ompoway/f communications commands can be sent (commands are sent in explicit message format). onnection format ombination of multidrop and Tbranch connections (for trunk and drop lines) aud rate evicenet: 00, 0, or kbps, or automatic detection of master baud rate ommunications media Special wire cable ( signal lines, power lines, and shield line) ommunications distance aud rate Network length rop line length Total drop line length 00 kbps 00 m max. (00 m max.) m max. 9 m max. 0 kbps 0 m max. (00 m max.) m max. 78 m max. kbps 00 m max. (00 m max.) m max. m max. The values in parentheses apply when Thin ables are used. Supply voltage evicenet power supply: V llowable voltage range evicenet power supply: to V urrent consumption 0 m max. ( V) Maximum number of nodes that can be (includes onfigurator when used) connected Maximum number of slaves that can be connected rror control R error detection Power supply Power supplied from evicenet communications connector.

7 Wiring Terminals R R Standard ontroller onnections RQ R R00 V/ 000 V Input power supply depends 00 to 0 V or V/ (no polarity) RR (Relay outputs) OM SU SU OM SU SU R00 V/ 000 V Input power supply depends 00 to 0 V or V/ (no polarity) RR (Relay outputs) OM SU SU OM SU SU RQ OUT V 0 m OUT V 0 m or urrent output 0 m, 00 Ω max. 00 m, 00 Ω max. R00 vent inputs V V OM I V PT T (urrent) (Voltage) (Thermocouple) R OUT urrent output 0 m, 00 Ω max. 00 m, 00 Ω max. (Switching by output type setting) OUT urrent output 0 m, 00 Ω max. 00 m, 00 Ω max. R00 vent inputs V V OM I V PT T (urrent) (Voltage) (Thermocouple) RQFLK RFLK R V RQ () RS8 () OUT V 0 m OUT V 0 m or urrent output 0 m, 00 Ω max. 00 m, 00 Ω max. RR (Relay outputs) OM SU SU OM SU SU R V RR (Relay outputs) OM SU SU OM SU SU R00 vent inputs V V OM I V PT T (urrent) (Voltage) (Thermocouple) R () RS8 OUT () urrent output 0 m, 00 Ω max. 00 m, 00 Ω max. (Switch using output type setting.) OUT urrent output 0 m, 00 Ω max. 00 m, 00 Ω max. R00 vent inputs V V OM I V PT T (urrent) (Voltage) (Thermocouple) (Resistance thermocouple) 7

8 RQTFLK RTFLK R R V RQ () RS8 () OUT V 0 m OUT V 0 m or urrent output 0 m, 00 Ω max. 00 m, 00 Ω max. RT (Transistor outputs) SU SU R vent inputs V V V V OM R00 vent inputs V V OM I V PT T (urrent) (Voltage) (Thermocouple) R V R () RS8 () OUT urrent output 0 m, 00 Ω max. 00 m, 00 Ω max. (Switch using output type setting.) OUT urrent output 0 m, 00 Ω max. 00 m, 00 Ω max. RT (Transistor outputs) SU SU R vent inputs V V V V OM R00 vent inputs V V OM I V PT T (urrent) (Voltage) (Thermocouple) RQFLK R00 V/ 000 V 00 to 0 V or V/ (no polarity) RQ () RS8 () OUT V 0 m OUT V 0 m or urrent output 0 m, 00 Ω max. 00 m, 00 Ω max. RR (Relay outputs) OM SU SU OM SU SU R OUT urrent output 0 m, 00 Ω max. 00 m, 00 Ω max. (Switch using output type setting.) OUT urrent output 0 m, 00 Ω max. 00 m, 00 Ω max. R00 vent inputs V V OM I V PT T (urrent) (Voltage) (Thermocouple) 8

9 RQTWFLK (loop ontrol) RTWFLK (loop ontrol) R RW00 V/ 000 V 00 to 0 V or V/ (no polarity) RQ () RS8 () OUT V 0 m OUT V 0 m or urrent output 0 m, 00 Ω max. 00 m, 00 Ω max. R vent inputs V V V V OM RW00 V/ 000 V 00 to 0 V or V/ (no polarity) R () RS8 () OUT urrent output 0 m, 00 Ω max. 00 m, 00 Ω max. (Switch using output type setting.) OUT urrent output 0 m, 00 Ω max. 00 m, 00 Ω max. R vent inputs V V V V OM RT (Transistor outputs) SU SU RW00 Input I V PT T Input I V PT T (urrent) (Voltage) (Thermocouple) RT (Transistor outputs) SU SU RW00 Input I V PT T Input I V PT T (urrent) (Voltage) (Thermocouple) RPRTF RPF00 V/ 000 V 00 to 0 V or V/ (no polarity) RRR Relay output 0 V OUT losed OUT Open RT (Transistor outputs) SU SU R vent inputs V V V V OM RPF00 Potentiometer O W I V PT T (urrent) (Voltage) (Thermocouple) RPRQFFLK RPF00 V/ 00 to 0 V or V/ (no polarity) RRR () RS8 () Relay output 0 V OUT losed OUT RQ OUT V 0 m OUT V 0 m or urrent output 000 V Open 0 m, 00 Ω max. 00 m, 00 Ω max. RR (Relay outputs) OM SU SU OM SU SU RPF00 Potentiometer O W I V PT T (urrent) (Voltage) (Thermocouple) 9

10 R evicenetcompatible ontroller onnections R RQTRT R00 V/ 000 V Input power supply depends 00 to 0 V or V/ (no polarity) RQ OUT V 0 m OUT V 0 m or urrent output RT (Transistor outputs) SU SU 0 m, 00 Ω max. 00 m, 00 Ω max. RRT evicenet onnector Red (V) White (N H) (Shield) lue (N L) lack (V ) R00 vent inputs V V OM I V PT T (urrent) (Voltage) (Thermocouple) RTRT RW00 V/ 000 V 00 to 0 V or V/ (no polarity) R OUT urrent output 0 m, 00 Ω max. 00 m, 00 Ω max. (Switch using output type setting.) OUT urrent output 0 m, 00 Ω max. 00 m, 00 Ω max. RT (Transistor outputs) SU SU RRT evicenet onnector Red (V) White (N H) (Shield) lue (N L) lack (V ) RW00 Input I V PT T Input I V PT T (urrent) (Voltage) (Thermocouple) RQTWRT (loop ontrol) RW00 V/ 000 V 00 to 0 V or V/ (no polarity) RQ OUT V 0 m OUT V 0 m or urrent output RT (Transistor outputs) SU SU 0 m, 00 Ω max. 00 m, 00 Ω max. RW00 Input I V PT T Input I V PT T (urrent) (Voltage) (Thermocouple) RRT evicenet onnector Red (V) White (N H) (Shield) lue (N L) lack (V ) RTWRT (loop ontrol) RW00 V/ 000 V 00 to 0 V or V/ (no polarity) R OUT urrent output 0 m, 00 Ω max. 00 m, 00 Ω max. (Switch using output type setting.) OUT urrent output 0 m, 00 Ω max. 00 m, 00 Ω max. RT (Transistor outputs) SU SU RRT evicenet onnector Red (V) White (N H) (Shield) lue (N L) lack (V ) RW00 Input I V PT T Input I V PT T (urrent) (Voltage) (Thermocouple) 0

11 RPRTFRT R RPF00 V/ 000 V 00 to 0 V or V/ (no polarity) RRR Relay output 0 V OUT losed OUT Open RT (Transistor outputs) SU SU RRT evicenet onnector Red (V) White (N H) (Shield) lue (N L) lack (V ) RPF00 Potentiometer O W I V PT T (urrent) (Voltage) (Thermocouple)

12 Nomenclature R R Operation Indicators No. isplay No. isplay MS/NS Indicators Top: MS ottom: NS Mode Key Level Key No. isplay own Key Up Key evicenet communications connector Used to connect the evicenet communications cables. The evicenet communications power is also supplied through this connector. The connector included with the evicenetcompatible ontrollers is the FK./STF.08 U M (PHONIX ONTT). Function Key / uto/manual Key Function Key / hannel Key imensions Note: ll units are in millimeters unless otherwise indicated. R 0. 9 (99)* 8 Terminal cover (OV; sold separately) 9 Panel utouts min. Mounting racket (ccessory) * The value in parentheses are for evicenetcompatible ontrollers. rimp terminal size: M 0 min Recommended panel thickness is to 8 mm. Group mounting is not possible. (Maintain the specified mounting space between ontrollers.) When two or more ontrollers are mounted, make sure that the surrounding temperature does not exceed the allowable operating temperature specified in the specifications.

13 ccessories (Order Separately) R Terminal over OV (for R) Unit Label Sheet Y9SL.8.8 Rubber Packing Y9SP (for IN8 9) Order the Rubber Packing separately if it becomes lost or damaged. (Refer to page.) The Rubber Packing can be used to achieve an IP degree of protection. (eterioration, shrinking, or hardening of the rubber packing may occur depending on the operating environment. Therefore, periodic replacement is recommended to ensure the level of waterproofing specified in NM. The time for periodic replacement depends on the operating environment. e sure to confirm this point at your site. onsider one year a rough standard. OMRON shall not be liable for the level of water resistance if the customer does not perform periodic replacement.) The Rubber Packing does not need to be attached if a waterproof structure is not required. Mounting dapters Y9H9 (pcs) 7 8. One set is packaged with the product. Order Mounting dapters separately if yours are lost or damaged. 0. LL IMNSIONS SHOWN R IN MILLIMTRS. To convert millimeters into inches, multiply by To convert grams into ounces, multiply by In the interest of product improvement, specifications are subject to change without notice.

14 Terms and onditions greement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) xclusive Warranty. Omron s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MKS NO WRRNTY OR RPRSNTTION, XPRSS OR IMPLI, OUT NONINFRINGMNT, MRHNTILITY OR FITNSS FOR PRTIULR PURPOS OF TH PROUTS. UYR KNOWLGS THT IT LON HS TRMIN THT TH PROUTS WILL SUITLY MT TH RQUIRMNTS OF THIR INTN US. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) uyer Remedy. Omron s sole obligation hereunder shall be, at Omron s election, to (i) replace (in the form originally shipped with uyer responsible for labor charges for removal or replacement thereof) the noncomplying Product, (ii) repair the noncomplying Product, or (iii) repay or credit uyer an amount equal to the purchase price of the noncomplying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by uyer must be approved in writing by Omron before shipment. Omron ompanies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. ny advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See or contact your Omron representative for published information. Limitation on Liability; tc. OMRON OMPNIS SHLL NOT LIL FOR SPIL, INIRT, ININTL, OR ONSQUNTIL MGS, LOSS OF PROFITS OR PROUTION OR OMMRIL LOSS IN NY WY ONNT WITH TH PROUTS, WHTHR SUH LIM IS S IN ONTRT, WRRNTY, NGLIGN OR STRIT LIILITY. Further, in no event shall liability of Omron ompanies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron ompanies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the uyer s application or use of the Product. t uyer s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. uyer shall be solely responsible for determining appropriateness of the particular Product with respect to uyer s application, product or system. uyer shall take application responsibility in all cases. NVR US TH PROUT FOR N PPLITION INVOLVING SRIOUS RISK TO LIF OR PROPRTY OR IN LRG QUNTITIS WITHOUT NSURING THT TH SYSTM S WHOL HS N SIGN TO RSS TH RISKS, N THT TH OMRON PROUT(S) IS PROPRLY RT N INSTLL FOR TH INTN US WITHIN TH OVRLL QUIPMNT OR SYSTM. Programmable Products. Omron ompanies shall not be responsible for the user s programming of a programmable Product, or any consequence thereof. Performance ata. ata presented in Omron ompany websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron s test conditions, and the user must correlate it to actual application requirements. ctual performance is subject to the Omron s Warranty and Limitations of Liability. hange in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron s representative at any time to confirm actual specifications of purchased Product. rrors and Omissions. Information presented by Omron ompanies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. OMRON orporation Industrial utomation ompany In the interest of product improvement, specifications are subject to change without notice. (c)opyright OMRON orporation 07 ll Right Reserved.