SINEAX V604s Programmable multifunctional transmitter

Size: px
Start display at page:

Download "SINEAX V604s Programmable multifunctional transmitter"

Transcription

1 SINAX V60s for direct currents, direct voltages, temperature sensors, teletransmitters or potentiometers SINAX V60s is a multifunctional transmitter for tophat rail assembly with the following main characteristics: Measurement of C voltage, C current, temperature (RT, TC) and resistance Sensor connection without any external jumpers inputs (e.g. for sensor redundancy or difference formation) outputs (U and / or I) C energy meter function (with S0 output) inputs can be linked with each other and allocated to the outputs which enables calculations and sensor monitoring (e.g. prognostic maintenance of sensors). System capability: Communication via Modbus interface Freely programmable relay, e.g. for limit or alarm signalling igital output (optional) AC/C widerange power supply unit Pluggable highquality screw or spring cage terminals All settings of the instrument can be adapted to the measuring task by PC software. The software also serves visualising, commissioning and service. Table : Input variables, measuring ranges Type of measurement Measuring range Minimum span C voltage [mv] mv mv C voltage [V] V ) > V C current [ma] ma 0. ma Resistance [Ω] Ω Ω RT Pt C 0 K RT Ni C 5 K TC Type B C 65 K TC Type C K TC Type J C 9 K Type of measurement Measuring range Minimum span TC Type K 0... C 50 K TC Type L C K TC Type N C K TC Type R C 59 K TC Type S C 65 K TC Type T C 50 K TC Type U C 9 K TC Typ W5ReW6Re C 5 K TC Type WReW5Re C 6 K ) In case of anterior device versions, the measuring range or the overload capacity is only V. Please check device version on the nameplate or with the PC software CBManager. Camille Bauer Metrawatt ata sheet V60s Le 0.5

2 SINAX V60s Technical data Measuring input irect voltage Measuring range mv For limits see table Ri > 0 MΩ, continuous overload max. ±00 mv Measuring range V For limits see table (only in corresponding Ri = MΩ, device type) continuous overload max. ±600 V ) irect current Measuring range ma For limits see table Ri = Ω, continuous overload max. ±50 ma Resistance thermometer RT Resistance measurement types Pt00 (IC 605), adjustable Pt0 Pt000 Ni00 (IN 60), adjustable Ni50 Ni000 Measuring range limits See table, or wire connection Measuring current 0. ma Line resistance 0 Ω per line, in wire connection adjustable or calibratable Thermocouples TC Thermocouples Type B,, J, K, N, R, S, T (IC 605) Type L, U (IN 60) Type W5ReW6Re, WRe W5Re (ASTM 990) Measuring range limits See Table Cold junction compensation Internal (with installed Pt00), with Pt00 on terminals or external with reference junction 0 0 C Resistance measurement, teletransmitter, potentiometer Measuring range limits See table, or wire connection Resistance teletransmitter Type WF and WF IN Measuring current 0. ma Line resistance 0 Ω per line, in wire connection adjustable or calibratable Measuring input irect current Measuring range ma Same as measuring input (only in corresponding device type) irect voltage Measuring range mv Same as measuring input Resistance thermometer RT Same as measuring input except: or wire connection Thermocouples TC Same as measuring input Resistance measurement, teletransmitter, potentiometer Same as measuring input except: or wire connection Please note The following device types are available: a) V60s with measuring input for x direct current [ma] and x high direct voltage [V] The direct voltage [V] and direct current [ma] measuring methods can be allocated to Input or Input here. b) V60s with measuring input for x direct current [ma] The different device types are fi rm and cannot be reprogrammed! The measuring inputs and are galvanically connected. If input sensors or input variables are used, observe combination options in Table and circuit instructions contained in the operating instructions! Analog outputs and The two outputs are galvanically connected and have a common earth. Voltage and current output softwareconfi gurable. irect current Output range ± 0 ma, range may be freely set Burden voltage max. V Open circuit voltage < 0 V Limit Adjustable, max. ± ma Residual ripple <% pp related to 0 ma irect voltage Output range ± 0 V, range may be freely set Load max. 0 ma Current limit Approx. 0 ma Limit Adjustable, max. ± V Residual ripple <% pp related to 0 V Output settings Limit Gain/offset trimming Inversion Relay contact output Variant Relay: Contact Switching capacity Variant digital output: Contact Switching capacity pole, normally open contact (NO) AC: A / 50 V C: A / 0 V Transistor, normally open contact (NO) max. VC/mA atenblatt V60s Le 0.5 Camille Bauer Metrawatt

3 SINAX V60s Bus/programming connection Interface, protocol RS5, Modbus RTU Baudrate kbaud, adjustable Transmission behaviour Measured quantities for the outputs Input Input Input input Input input Input input Input input Minimum value, maximum value or mean value of input and input Sensor redundancy Input or input Transmission functions Linear, Absolute amount, scaling (gain/ offset), magnifi er function (zoom) userspecifi c via basic value table ( basic values per measured variable) Settling time: Adjustable 0 s Limit values and monitoring Number of limitvalues Measured variable for the limit values Input Input Measured variable for outputs Input input (e.g. drift monitoring in case of sensors) Input input (e.g. drift monitoring in case of sensors) Meter Functions Absolute amount Gradient dx/dt (e.g. temperature gradient monitoring) Time delay Adjustable s Signalling Relay contact or digital output, alarm L, status Meter and pulse output Meter : Number Meter source Measured variables for outputs or Settings Mode (pos., neg.), unit (prefi x, s/min/h), meter reset / set Pulse output (variant digital output) Standard: S0 interface according to IC/N 605 Settings Pulse duration (0...50ms), pulse rate Signalling igital output Sensor breakage and short circuit monitoring measuring input Signalling Relay contact or digital output, alarm L, status Output value in case of a fault Signalling to alarm L In case of a sensor error, the defective input ( or ) is signalled by the number of fl ashes of the alarm L (x or x). In case of a failure at both inputs: Alarm L does not fl ash. Other monitoring operations rift monitoring Monitoring of measured value difference between input sensors for a certain period of time (e.g. due to different sensor response times). If the limit value is exceeded for this time, an alarm is signalled. (See limit values and ) Sensor redundancy Measurement with temperature sensors; if sensor fails (fault) sensor is activated for bridging (see measuring quantities for outputs) Alarm signalling Relay contact or digital output Alarm L Time delay Output value in case of a fault Power supply With closed contact, the yellow L shines, invertible alarmfunction Adjustable 0 60 s For sensor breakage and short circuit, value adjustable 0 0% Rated voltage UN Tolerance 0 V C ±5% 00 0 V AC, Hz ±5% Power consumption > W or VA isplays at the instrument L Color Function ON green Power on green fl ashing Communication activ RR red Alarm yellow Relais on Configuration, programming Operation with PC software «CBManager» Camille Bauer Metrawatt atenblatt V60s Le 0.5

4 SINAX V60s Accuracies (according to N/IC 600) Reference conditions Ambient temperature Power supply Reference value Settings Installation position C ± K V C Span Input : irect voltage mv, mv Output : 0 ma, burden resistance 00 Ω Mains frequency 50 Hz, Setting time s Input, output, relay, monitoring off or not active, for voltage output: range V, burden resistance kω Vertically, detached Basic accuracy At reference conditions ±0.% Other types of measurement and input ranges: RT Pt00, Ni00 ±0.% ±0. K Resistance measurement ±0,% ±0. Ω TC Type K,, J, T, N, L, U ±0.% ±0. K, measurement value > 00 C TC Type R, S ±0.% ±. K TC Type B ±0.% ±. K, measurement value > 00 C TC W5ReW6Re, WReW5Re ±0.% ±.0 K C voltage mv ±0.% ±0.05 mv C voltage V U 00V ±0.% ±0.005 V U > 00V /0.5%0.005V C current ma ±0.% ±0.005 ma Additional error (additive) High range minimum value (Minimum value >0% of maximum value): ±0.% of maximum value Small output range ±0.% * (reference range / new range) Cold junction compensation internal ± K Magnifi er function ± Zoom factor x (basic accuracy additional error) Zoom factor = measured variable range / zoom range Influencing factors Ambient temperature ±0.% per 0 K at reference conditions other settings: basic accuracy and additional errors per 0 K Longterm drift ±0.% Common mode/ series mode infl uence ±0.% Ambient conditions Operating temperature 5 55 C Storage temperature 0 0 C Relative humidity 5%, no condensation Range of utilisation Internal room up to 000m above sea level Installation details esign imensions Assembly Tophat rail housing U Combustibility class V0 according to UL 9 See dimensional drawing For snapon fastening on tophat rail (5 x 5 mm or 5 x.5 mm) according to N 50 0 Terminals Pluggable,.5 mm Front plug spring terminal.5 mm Weight 0. kg Product safety, regulations lectromagnetic compatibility Ingress protection (acc. IC 59 or N 60 59) N / Housing IP 0 terminal IP0 lectric design Acc. IC or N 6 00 egree of pollution Between power supply and all circuits Between the measuring input () and all circuits Between output ( ) and relay contact resp. digital output Between output ( ) and the bus connection Reinforced insulation overvoltage category III operating voltage 00 V test voltage. kv AC rms Reinforced insulation overvoltage category III operating voltage 00 V overvoltage category II operating voltage 600 V test voltage. kv AC rms Reinforced insulation overvoltage category II Working voltage 00 V Test voltage. kv AC rms Functional insulation Working voltage <50 V Test voltage 0.5 kv AC rms nvironmental tests N 6006// N 6006 Shock: 50g, ms, sawtooth, halfsine N Vibration: 0.5mm/g, Hz, 0 cycles atenblatt V60s Le 0.5 Camille Bauer Metrawatt

5 SINAX V60s lectric connections Circuit Terminal Remarks Measuring input Output Output Relay contacts Power supply to (), ( ) 0 (), ( ) 9 (), () 5 (/~) 6 ( /~) See table, : polarity at digital output Note polarity at C Type of measurement Thermocouple with Pt00 at the terminals at the other input Input Input Pt00 Bus/ programming connection,, GN Front plug Resistance thermometer or resistance measurement wire RT, R Variant digital output: = Resistance thermometer or resistance measurement wire RT, R Table : Connection of inputs Please note: If input sensors or input variables are used, observe combination options in Table and circuit instructions contained in the operating instructions! Type of measurement irect voltage mv Input Input U [mv] Resistance thermometer or resistance measurement wire RT, R Ra 0% Rd Resistanceteletransmitter WF 00% Re Thermocouple with external cold junction thermostat or internally compensated Resistanceteletransmitter WFIN Ra Rd Re 0% 00% Thermocouple with Pt00 at the terminals at the same input Pt00 irect voltage V (only in corresponding device type) U [V] 6 Camille Bauer Metrawatt atenblatt V60s Le 0.5 5

6 SINAX V60s Type of measurement irect current ma (Input only in corresponding device type) Input Input 5 6 I [ma] imensional drawing Screw terminals Table : Measuring method combination options Input measuring method U [mv] earthed U [V] I [ma] TC ext. earthed TC int. earthed R L R L RT L RT L I [ma] Input Terminals, 6, 5,,,,,,,,,,, 6, measuring method U [mv], earthed U [V] 6, I [ma] 5, TC ext., earthed TC int., earthed,, R L, R L,, R L,,, RT L, RT L,, WF,, WF_IN,, RT L,,, Selectable only in device type x direct current [ma] and x high voltage [V] Selectable only in device type x direct current [ma].5 0 Spring cage terminals Scope of supply SINAX V60s Safety Instructions 6 50 Software and ocuc 56 0 Accessories USBRS5 converter (for programming the V60s) Article No atenblatt V60s Le 0.5 Camille Bauer Metrawatt

7 SINAX V60s Ordering details Standard versions The following transmitter types programmed in basic confi guration are available as standard versions. An indication of the article number is suffi cient: Version Configuration Ordercode Article No. evice versions for high C voltages: C voltages of up to 600VC can be measured at one input. In addition, mv, RT, TC and resistance measurements are possible at both inputs. At one input ma. The device is supplied with screw terminals and a limit value relay. The following confi guration is preset: Input : mv / Input : not used Output : 0 ma / Output : not used 60s0 AA evice version without a high C input: Contrary to the version for high voltages, ma signals can be processed simultaneously at both inputs of this device version. In addition, mv, RT, TC and resistance measurements are possible. The device is supplied with screw terminals and a limit value relay. The following confi guration is preset: Input : 0 ma / Input : 0 ma Output : 0 ma / Output : 0 ma 60S 0AC0 C0 696 Please note: This are two hardware platforms. A SINAX V60s with high C Voltage cannot be confi gured to x ma inputs afterwards, just as a SINAX V60s with x ma cannot measure a high C Voltage. V60s, Programmable 60s. Mechanical design Tophat rail housing. Version Standard with screw terminals Standard with spring cage terminals. Climatic rating Standard climatic rating. Test certificate without test certifi cate 0 with test certifi cate German with test certifi cate nglish 5. Configuration Basic configuration: G Hardware layout for measuring ma at both inputs. Voltage > VC up to 00 VC is not possible. Confi gured: Input : 0 ma / Input : 0 ma Output : 0 ma / Output : 0 ma Programmed to order A V60s, Programmable 60s 6. Mains ripple suppression 50Hz 60Hz. Input mv Input (range mv) A [mv]: V Input (range V) B [V]: ma Input (range ma) C [ma]: Thermocouple (internal compensation) Resistance thermometer wire Resistance thermometer wire F Resistance thermometer wire G Resistance sensor wire H Resistance sensor wire J Resistance sensor wire K mv Input: minimum span mv V Input: minimum span > V ma Input: minimum span 0, ma Camille Bauer Metrawatt atenblatt V60s Le 0.5

8 SINAX V60s V60s, Programmable 60s. Sensor Type Input Not used 0 Type B (Range 0 0 C) A Type (Range C) B Type J (Range 0 00 C) C Type K (Range 0 C) Type L (Range C) Type N (Range 0 00 C) F Type R (Range 50 6 C) G Type S (Range 50 6 C) H Type T (Range 0 00 C) J Type U (Range C) K Type W5ReW6Re (Range 0 5 C) L Type WReW5Re (Range 0 5 C) M RT Pt 00 (Range C) N RT Pt 000 (Range C) O RT Ni 00 (Range C) P RT Ni 000 (Range C) Q Resistor (Range Ω) R [W]: Type B: minimum Span 65 K Type : minimum Span K Type J: minimum Span 9 K Type K: minimum Span 50 K Type L: minimum Span K Type N: minimum Span K Type R: minimum Span 59 K Type S: minimum Span 65 K Type T: minimum Span 50 K Type U: minimum Span 9 K Type W5ReW6Re: minimum Span 5 K Type WReW5Re: minimum Span 6 K RT Pt 00: minimum Span 0 K RT Pt 000: minimum Span 0 K V60s, Programmable 60s RT Ni 00: minimum Span 5 K RT Ni 000: minimum Span 5 K Resistor: minimum Span 9. Input Not used 0 mv Input (Range mv) A [mv]: ma Input (Range ma) C [ma]: Thermocouple (internal compensation) Resistance thermometer wire Resistance thermometer wire F Resistance sensor wire H Resistance sensor wire J mv Input: minimum Span mv ma Input: minimum Span 0, ma 0. Sensor Type Input Not used 0 Type B (Range 0 0 C) A Type (Range C) B Type J (Range 0 00 C) C Type K (Range 0 C) Type L (Range C) Type N (Range 0 00 C) F Type R (Range 50 6 C) G Type S (Range 50 6 C) H Type T (Range 0 00 C) J Type U (Range C) K Type W5ReW6Re (Range 0 5 C) L Type WReW5Re (Range 0 5 C) M RT Pt 00 (Range C) N RT Pt 000 (Range C) O RT Ni 00 (Range C) P RT Ni 000 (Range C) Q atenblatt V60s Le 0.5 Camille Bauer Metrawatt

9 SINAX V60s V60s, Programmable 60s Resistor (Range Ω) R [W]: minimum Span ditto Sensor Type Input. Output signal / Measuring output current (Range 0 0 ma) [ma]: voltage (Range 0 0 V) [V]:. Output signal / Measuring output Not used 0 current (Range 0 0 ma) [ma]: voltage (Range 0 0 V) [V]:. Relay contact output Relay, normally open contact (NO), AC: A/50V, C: A/0V igital output for fast pulse (S0) Umax / Imax: VC / ma Basic configurations Type Standard, with measuring for x direct current [ma] Basic configuration Input and : 0mA Output and : 0mA Rely on us. Camille Bauer Metrawatt AG Aargauerstrasse CH560 Wohlen / Switzerland Phone: 56 6 Fax: 56 6 info@cbmag.com Subject to changes Issue 0.5 ata sheet V60s Le

SINEAX V 604s Programmable multifunctional transmitter

SINEAX V 604s Programmable multifunctional transmitter SINEAX V 60s f direct currents, direct voltages, temperature senss, teletransmitters potentiometers 00 SINEAX V60s is a multifunctional transmitter f top-hat rail assembly with the following main characteristics:

More information

Plug-in module SIRAX V 606, 1 or 2 channels Programmable Temp. Transmitter for RTD and TC inputs

Plug-in module SIRAX V 606, 1 or 2 channels Programmable Temp. Transmitter for RTD and TC inputs Plug-in module, or channels Application The programmable transmitter (Fig. ) is designed for measuring temperature in combination with thermocouples or resistance thermometers. Thermocouple non-linearities

More information

SINEAX TV809, 1 channel Programmable Isolating Amplifier

SINEAX TV809, 1 channel Programmable Isolating Amplifier For electrically insulating, ampliflying and converting DC signals 0102 II (1) Ga II (1) Da Application The purpose of the isolating amplifi er SINEAX TV809 (Fig. 1) is to electrically insulate input and

More information

SINEAX TV 808, 1 channel Isolating Amplifier unipolar/bipolar

SINEAX TV 808, 1 channel Isolating Amplifier unipolar/bipolar For electrically insulating, amplifying and converting DC signals 0102 II (1) G Application The purpose of the isolating amplifi er SINEAX TV 808 (Fig. 1 and 2) is to electrically insulate input and output

More information

SINEAX TV 808, 2 channels Isolating Amplifier Unipolar/Bipolar

SINEAX TV 808, 2 channels Isolating Amplifier Unipolar/Bipolar SINEAX TV 808, channels For electrically insulating, amplifying and converting DC signals Application The purpose of the isolating amplifi er SINEAX TV 808 (Fig. ) is to electrically insulate input and

More information

SINEAX V 624 Programmable Temperature Transmitter for RTD and TC inputs

SINEAX V 624 Programmable Temperature Transmitter for RTD and TC inputs SINEAX V 6 for rail mounting in housing P/7 or P/7 St 00 II () GD Application SINEAX V 6 (Figs. and ) is designed for measuring temperature in combination with thermocouples or resistance thermometers.

More information

Plug-in module SIRAX TV 808, 1 channel Isolating Amplifier unipolar/bipolar

Plug-in module SIRAX TV 808, 1 channel Isolating Amplifier unipolar/bipolar for electrically insulating, amplifying and converting DC signals 0102 II (1) G pplication The purpose of the isolating amplifi er SIRX T 808 (Fig. 1) is to electrically insulate input and output signals,

More information

SINEAX G 537 Transducer for Phase Angle Difference

SINEAX G 537 Transducer for Phase Angle Difference Carrying rail housing P/0 pplication The transducer SINX G 5 (Fig. ) converts the phase angle difference of two synchronised supplies into a load independent DC current or a load independent DC voltage

More information

SINEAX I 552 Transducer for AC current

SINEAX I 552 Transducer for AC current SNEAX 55 With power supply RMS value measurement, with measuring ranges Carrying rail housing P/0 Application he transducer SNEAX 55 (Fig. ) converts a sinusoidal or a distorted AC current into a load

More information

SINEAX U 553 Transducer for AC Voltage

SINEAX U 553 Transducer for AC Voltage With power supply RMS value measurement Carrying rail housing P/0 Application he transducer SINEAX U 55 (Fig. ) converts a sinusoidal or a distorted AC voltage into a load independent DC current or a load

More information

SINEAX G 536 Phase Angle or Power Factor Transducer

SINEAX G 536 Phase Angle or Power Factor Transducer SIEAX G Carrying rail housing P/0 Application The transducer SIEAX G (Fig. ) measures the phase angle or power factor between current and voltage of a single or -phase balanced network having a sine wave

More information

KINAX 2W2 Programmable Transmitter for Angular Position

KINAX 2W2 Programmable Transmitter for Angular Position Application The KINAX 2W2 (Figs. 2 and 3) converts the angular position of a shaft into a load independent direct current signal, proportional to the angular position. The unit is contact free and has

More information

SINEAX B 811 Power Pack with additional Functions

SINEAX B 811 Power Pack with additional Functions SINEA B 8 for intelligent and conventional s, in housing S7 for rail and wall mounting 002 II () G Application The power supply unit SINEA B 8 (Figure ) provides the DC power supply for s and transfers

More information

Plug-in module SIRAX TV 808, 1 channel Isolating Amplifier, output Ex or non-ex

Plug-in module SIRAX TV 808, 1 channel Isolating Amplifier, output Ex or non-ex for electrically insulating, amplifying and converting DC signals, also designed for FSK 002 II () G pplication The purpose of the isolating amplifi er SIRX TV 808 (Fig. ) is to electrically insulate input

More information

KINAX WT 717 Programmable Transmitter for Angular Position

KINAX WT 717 Programmable Transmitter for Angular Position Ruggedized version Application The KINAX WT 717 (Fig. 1) converts the angular position of a shaft into a load-independent direct current signal, proportional to the angular position. The unit is contact

More information

SINEAX TV 808, 1 channel Isolating Amplifier, output Ex or non-ex

SINEAX TV 808, 1 channel Isolating Amplifier, output Ex or non-ex for electrically insulating, amplifying and converting DC signals, also designed for FSK 1 0102 II (1) G Application The purpose of the isolating amplifi er SINEAX TV 808 (Fig. 1) is to electrically insulate

More information

for DC currents or voltages, temperature sensors, remote sensors or potentiometers II (1) G Application Features / Benefits

for DC currents or voltages, temperature sensors, remote sensors or potentiometers II (1) G Application Features / Benefits SINEAX VC 603, Programmable for DC currents or voltages, temperature sensors, remote sensors or potentiometers 0102 II (1) G Application The SINEAX VC 603 (Figs. 1 and 2) converts the input variable a

More information

Description of functions Controller system VR660 / A200R

Description of functions Controller system VR660 / A200R Description of functions Controller system VR660 / A00R Local bus RS VR660/A00R e 56 76-0.07 Camille Bauer AG Aargauerstrasse 7 CH-560 Wohlen/Switzerland Phone + 56 68 Fax + 56 68 5 5 e-mail: info@camillebauer.com

More information

Temperature transmitter itemp PCP DIN rail TMT 121

Temperature transmitter itemp PCP DIN rail TMT 121 Technical information TI 087R/09/en 510 03671 Temperature transmitter itemp PCP DIN rail TMT 121 Universal temperature transmitter for resistance thermometers (RTD), thermocouples, resistance and voltage

More information

SINEAX I 503 / SINEAX U 504 Transducer for AC current or AC voltage

SINEAX I 503 / SINEAX U 504 Transducer for AC current or AC voltage Application The transducers SINEAX I 503/U 504 (Figs. 1 and 2) are designed to convert a sinusoidal AC current or voltage into a load independent DC signal proportional to the measured value. This output

More information

Theta 60R. Technical Data Sheet. Special Features. Fig. 2 Theta R, 2 channel version, in housing S17 hole mounting brackets pulled out.

Theta 60R. Technical Data Sheet. Special Features. Fig. 2 Theta R, 2 channel version, in housing S17 hole mounting brackets pulled out. Technical Data Sheet Theta 60R 60 R 60 R Fig. Theta R, channel version, in housing S7 clipped on to a top - hat rail. Fig. Theta R, channel version, in housing S7 hole mounting brackets pulled out. Theta

More information

SINEAX VC 603, Programmable combined transmitter/alarm unit

SINEAX VC 603, Programmable combined transmitter/alarm unit for DC currents or voltages, temperature sensors, remote sensors or potentiometers 0102 II (1) G Application The SINEAX VC 603 (Fig. 1) converts the input variable a DC current or voltage, or a signal

More information

DSCL, DSCP, SCTP. Industrial Loop Isolators and Transmitters DSCL, DSCP, SCTP. Industrial Loop Isolators and Transmitters

DSCL, DSCP, SCTP. Industrial Loop Isolators and Transmitters DSCL, DSCP, SCTP. Industrial Loop Isolators and Transmitters Industrial Loop Isolators and Transmitters DSCL,, SCTP DSCL,, SCTP Industrial Loop Isolators and Transmitters Description Dataforth s DSCL,, and SCTP series of products is a complete family of loop and

More information

KINAX SR 719 Programmable Transmitter for Position Feedback

KINAX SR 719 Programmable Transmitter for Position Feedback Position transmitter with NAMUR valve fitting Application The position feedback transmitter KINAX SR 719 (Figs. 1 and 2) is used to measure and transmit linear displacement (stroke) on various types of

More information

Isolators A3/1. Temperature Transmitter Field Circuit Non-Ex i Series

Isolators A3/1. Temperature Transmitter Field Circuit Non-Ex i Series Temperature Transmitter Series 9182 > One unit for nearly all temperature sensors indivdually configurable > Signal duplication possible > Galvanic isolation between input, output, power supply and configuration

More information

Temperature Input Module for Zone 1 Series 9482/32

Temperature Input Module for Zone 1 Series 9482/32 www.stahl.de > 8 channels for temperature sensors > Intrinsically safe inputs Ex ia > For Pt-, Ni- and Cu-resistance temperature detectors according to DIN, IEC and GOST in 2-, 3- and 4-wire circuits >

More information

Plug-in module SIRAX TI 807 Passive DC signal isolator

Plug-in module SIRAX TI 807 Passive DC signal isolator without power supply, x- and non-x version 0102 II (1) resp. II (2) pplication The signal isolator SIRX TI 807 (Fig. 1) serves to electrically insulate the analogue DC signal in the range 0 20 m which

More information

SINEAX V 604 Programmable universal transmitter

SINEAX V 604 Programmable universal transmitter for DC currents or voltages, temperature sensors, remote sensors or potentiometers 0102 II (1) G Application The universal transmitter SINEAX V 604 (Figures 1 and 2) converts the input variable a DC current

More information

Assembly. Front view. Parametrization interface. Power Bus

Assembly. Front view. Parametrization interface. Power Bus Temperature Converter Features Assembly 1-channel signal conditioner 24 V DC supply Thermocouple, RTD, potentiometer or mv input Input for PTC thermistor Current and voltage output Line fault (LFD) and

More information

itemp HART DIN rail TMT112

itemp HART DIN rail TMT112 Temperature transmitter itemp HART DIN rail TMT112 Universal temperature transmitter for resistance thermometers (RTD), thermocouples, resistance and voltage transmitters, incorporating HART protocol Application

More information

Isolators A3/1.

Isolators A3/1. Temperature Transmitter Series 9182 > One unit for nearly all temperature sensors indivdually configurable > Signal duplication possible > Galvanic isolation between input, output, power supply and configuration

More information

CONTA-ELECTRONICS. Converter Units

CONTA-ELECTRONICS. Converter Units CONTA-ELECTRONICS Whether for manufacturing, electrical machine and plant instrumentation, control engineering, power distribution, building automation, or process engineering it is always important to

More information

EURAX VC 603 Programmable combined transmitter/alarm unit

EURAX VC 603 Programmable combined transmitter/alarm unit EURX VC 603 for DC currents or voltages, temperature sensors, remote sensors or potentiometers 010 II (1) GD pplication The combined transmitter/alarm unit EURX VC 603 (Fig. 1) converts the input variable

More information

SINEAX TI 807 Passive DC signal isolator

SINEAX TI 807 Passive DC signal isolator without power supply, Ex- and non-ex version, in housing N17 or S17 for rail and wall mounting 0102 II (1) G resp. II (2) G Application The signal isolator SINEAX TI 807 serves to electrically insulate

More information

P5201 Universal Programmable Transmitters with Galvanic Isolation

P5201 Universal Programmable Transmitters with Galvanic Isolation Transmitters - KB0288-2012/09 P5201 Universal Programmable Transmitters with Galvanic Isolation One type of transmitter for all regular resistance and thermocouple sensors. Linearized output signal 4 to

More information

Digital Meters With A Multicolour Bargraph LEL-NA3 one-channel LEL-NA5 one-channel LEL-NA6 two-channel

Digital Meters With A Multicolour Bargraph LEL-NA3 one-channel LEL-NA5 one-channel LEL-NA6 two-channel Digital Meters With A Multicolour Bargraph LEL-NA3 one-channel LEL-NA5 one-channel LEL-NA6 two-channel Digital-analogue meters of LEL-NA series with a multicolour bargraph have a universal input destined

More information

09746E00. ATEX / IECEx NEC 505 NEC 506 NEC 500 Class I Class I Class II Class III Zone Zone Division Ex i

09746E00. ATEX / IECEx NEC 505 NEC 506 NEC 500 Class I Class I Class II Class III Zone Zone Division Ex i Temperature Transmitter Series 9182 www.stahl.de > One unit for nearly all temperature sensors indivdually configurable > Intrinsically safe input [Ex ia] IIC > Signal duplication possible > Galvanic isolation

More information

MCR-T-UI(/NC) MCR-T-UI-E(/NC)

MCR-T-UI(/NC) MCR-T-UI-E(/NC) MCR-T-UI(/) MCR-T-UI-E(/) Programmable Temperature Transducers for Resistance Thermometers and Thermocouples INTERFACE ata Sheet 00_0_en PHOENIX CONTACT - 0/00 escription A universal temperature measuring

More information

SINEAX TI 807 Passive DC signal isolator. SINEAX TI 807 Passive DC signal isolator

SINEAX TI 807 Passive DC signal isolator. SINEAX TI 807 Passive DC signal isolator SINEAX TI 807 without power supply, Ex- and non-ex version, in housing N17 or S17 for rail and wall mounting 0102 II (1) G resp. II (2) G Application The signal isolator SINEAX TI 807 serves to electrically

More information

0 2 1 â Ó. itemp HART TMT182. Technical Information

0 2 1 â Ó. itemp HART TMT182. Technical Information Technical Information itemp HART TMT182 Temperature head transmitter Head transmitter for resistance thermometers (RTD), thermocouples (TC), resistance and voltage transmitters (mv), HART -protocol, for

More information

Digital Temperature Transmitters Model T12.10, Universally Programmable, Head Mounting Model T12.30, Universally Programmable, Rail Mounting

Digital Temperature Transmitters Model T12.10, Universally Programmable, Head Mounting Model T12.30, Universally Programmable, Rail Mounting Electrical Temperature Measurement Digital Temperature Transmitters Model T12.10, Universally Programmable, Head Mounting Model T12.30, Universally Programmable, Rail Mounting WIKA Data Sheet TE 12.03

More information

Temperature head transmitter itemp PCP TMT 181

Temperature head transmitter itemp PCP TMT 181 Technical information TI 070R/09/en Mat.-Nr.: 510 01110 Temperature head transmitter itemp PCP TMT 181 Universal head transmitter for resistance thermometers (RTD), thermocouples, resistance and voltage

More information

0 2 1 â Ó. itemp HART TMT182. Technical Information

0 2 1 â Ó. itemp HART TMT182. Technical Information Technical Information itemp HART TMT182 Temperature head transmitter Head transmitter for resistance thermometers (RTD), thermocouples (TC), resistance and voltage transmitters (mv), HART -protocol, for

More information

MULTIFUNCTION GRAPHICAL UNIT MGU 800

MULTIFUNCTION GRAPHICAL UNIT MGU 800 MULTIFUNCTION GRAPHICAL UNIT MGU 800 For display, recording and evaluation of process instruments signals (level, temperature, pressure, etc.) 3.5" TFT display, multi-language menu Variety of possible

More information

MODEL: M1EXT. with Display M1E Series

MODEL: M1EXT. with Display M1E Series 2 Channel Super-mini Signal Conditioners with Display M1E Series THERMOCOUPLE TRANSMITTER (2 channels, PC programmable) Functions & Features Accepts direct input from a thermocouple and provides a linearized

More information

Process displays For standard signals, temperature, resistance measurement

Process displays For standard signals, temperature, resistance measurement Features Inputs: Voltage ±10 V, ±200 V / Current ±20 ma / thermocouples J,K,T,N,Pt100,Pt1000 / resistance measurement / potentiometer Display range can be linearised Two limits output Min, Max functions

More information

MODEL: M2XU MODEL: M2XU [1][2] [3][4]

MODEL: M2XU MODEL: M2XU [1][2] [3][4] Super-mini Signal Conditioners Mini-M Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Accepts direct inputs from various sensors and provides a standard process signal I/O types and

More information

RISH Ducer TV 808, 2 channels Isolating amplifier unipolar / bipolar

RISH Ducer TV 808, 2 channels Isolating amplifier unipolar / bipolar Fig. 1. Isolating amplifier RISH Ducer TV 808 in housing S 17 clipped onto a top - hat rail or screw hole mounting brackets pulled out. Features and Benefits Electric Isolation between input, and power

More information

3 Ex i Isolators. Temperature Transmitter without Output 0/ ma, with Limit Value Contact (Field Circuit Ex i) Type 9182/.

3 Ex i Isolators. Temperature Transmitter without Output 0/ ma, with Limit Value Contact (Field Circuit Ex i) Type 9182/. Ex i Isolators Temperature Transmitter without Output 0/4... 20 ma, with Limit Value Contact Field Circuit Ex i) One unit for nearly all temperature sensors indivdually configurable Intrinsically safe

More information

MACX MCR-EX-T-UI-UP. Extract from the online catalog. Order No.:

MACX MCR-EX-T-UI-UP. Extract from the online catalog. Order No.: Extract from the online catalog MACX MCR-EX-T-UI-UP Order No.: 2865654 Freely programmable Ex-i temperature transducer with analog output and 1 limit value relay, standard configuration, resistance thermometer

More information

JUMO dtrans T02 Programmable 4-wire Transmitter (Smart Transmitter)

JUMO dtrans T02 Programmable 4-wire Transmitter (Smart Transmitter) JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net

More information

TT2780. Temperature head transmitter For resistance thermometers Pt100, settable using a PC, for installation in a sensor head Form B, BUZ, BUZ-H

TT2780. Temperature head transmitter For resistance thermometers Pt100, settable using a PC, for installation in a sensor head Form B, BUZ, BUZ-H Postal address: House address Fon (+49) 0 22 42-8703-0 Postbox 1261 Löhestr. 37 Fax (+49) 0 22 42-8703-20 http: // www.tematec.de 53759 Hennef 53773 Hennef e-mail: team@tematec.de TT2780 Data Sheet TT2780

More information

MODEL: M2EXT. Super-mini Signal Conditioners with Display Mini-M M2E Series

MODEL: M2EXT. Super-mini Signal Conditioners with Display Mini-M M2E Series Super-mini Signal Conditioners with Display Mini-M ME Series THERMOCOUPLE TRANSMITTER (PC programmable) Functions & Features Accepts direct input from a thermocouple and provides a linearized process signal

More information

Temperature Transmitters - DIN Rail Mounted

Temperature Transmitters - DIN Rail Mounted XTD Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction

More information

itemp PA TMT184 Technical information

itemp PA TMT184 Technical information Technical information itemp PA TMT184 Temperature head transmitter with PROFIBUS-PA interface. Supply and digital communication using PROFIBUS-PA, for installation in a Form B sensor head. Features and

More information

3 Ex i Isolators. Temperature Transmitter with Output 0/ ma, without Limit Value Contact (Field Circuit Ex i) Type 9182/.0-5.

3 Ex i Isolators. Temperature Transmitter with Output 0/ ma, without Limit Value Contact (Field Circuit Ex i) Type 9182/.0-5. Ex i Isolators Temperature Transmitter with Output 0/4... 20 ma, without Limit Value Contact Field Circuit Ex i) One unit for nearly all temperature sensors indivdually configurable Intrinsically safe

More information

Rudder or propeller angular position transmitter KINAX WT720

Rudder or propeller angular position transmitter KINAX WT720 Description The is a robust, absolute angular position transmitter, which is particularly suitable for use in marine applications such as the detection of rudder or propeller positions. In contrast to

More information

Digital Input Output Module 24 V for Ex n Zone 2 Series 9472/35

Digital Input Output Module 24 V for Ex n Zone 2 Series 9472/35 www.stahl.de > 16 channels can be adjusted in pairs as digital inputs or outputs > Suitable for NAMUR proximity switches, 3-wire PNP proximity switches, contacts and solenoid valves (24 V / 0.5 A). > Up

More information

High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals

High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals Accessories High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals WIKA data sheet AC 80.03 Applications Machine building

More information

JUMO dtrans T02 Programmable 4-wire Transmitter (Smart Transmitter)

JUMO dtrans T02 Programmable 4-wire Transmitter (Smart Transmitter) JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net

More information

PRELIMINARY DATA SHEET RI-D140. Three Phase Multifunction DIN Rail Energy Meter (MID Certified) MID

PRELIMINARY DATA SHEET RI-D140. Three Phase Multifunction DIN Rail Energy Meter (MID Certified) MID RI-D140 Three Phase Multifunction DIN Rail Energy Meter (MID Certified) Four module DIN rail mounted Energy pulse LED True RMS measurement Cost effective and accurate Modbus communication -/1A or -/5A

More information

EURAX UI 505, Combined Transducer for AC current and AC voltage

EURAX UI 505, Combined Transducer for AC current and AC voltage Plug-in module in Euro-format Application The transducers EURAX UI 505 (Fig. 1) are intended to simultaneous converts of up to 3 sinusoidal AC currents or voltages. Output signals available are load-independent

More information

KINAX 3W2 Transmitter for angular position

KINAX 3W2 Transmitter for angular position KINX 3W2 For installation KINX 3W2 is a compact transmitter for angular position for installation in devices and apparatus. Due to its unique capacitive measuring principle, it acquires the angular position

More information

SINEAX / EURAX 2I1 Passive DC signal isolator

SINEAX / EURAX 2I1 Passive DC signal isolator SINEAX / EURAX I without power supply 0 II () G resp. II () G Application The DC signal isolator SINEAX/EURAX I (Figs. and ) serve to isolate load-independent DC current signals. It suppressed noise voltages

More information

EMBSIN 281 G Power factor transducer

EMBSIN 281 G Power factor transducer EMBSI 8 G Carrying rail housing MBS/SP Application The transducer EMBSI 8 G (Fig. ) measures the power factor between current and voltage of a single or 3-phase balanced network having a sine wave form.

More information

N30P DIGITAL PANEL METER

N30P DIGITAL PANEL METER N30P DIGITAL PANEL METER Features: NEW Measurement of single-phase network parameters: voltage, current, active, reactive and apparent power, cosj, tgj, j, frequency, active, reactive and apparent energy,

More information

27/04/2015

27/04/2015 Modular Carril DIN 35 mm HIL Part number 84871120 Control of AC and DC currents Automatic recognition of AC/DC Measurement ranges from 2 ma to 10 A Choice between over and undercurrent True RMS measurement

More information

JUMO dtrans T04 Four-wire Transmitter, settable via DIP switch/pc setup program

JUMO dtrans T04 Four-wire Transmitter, settable via DIP switch/pc setup program JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net

More information

Digital indicator for panel mounting With multi-function input Model DI25

Digital indicator for panel mounting With multi-function input Model DI25 Accessories Digital indicator for panel mounting With multi-function input Model DI25 WIKA data sheet AC 80.02 Applications Plant construction Machine tools Plastics technology and processing Ventilation

More information

Electronic alarm signalling unit TES 20. for temperature and standard signals ENA EN

Electronic alarm signalling unit TES 20. for temperature and standard signals ENA EN Electronic alarm signalling unit TES 20 ENA117.01 EN for temperature and standard signals Universal alarm signalling unit (constructional width 4 T) for Temperature (temperature monitor) with Pt 100 IEC

More information

Temperature Transmitters - Head Mounted

Temperature Transmitters - Head Mounted XTH Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction

More information

USB-2404-UI Specifications

USB-2404-UI Specifications Specifications Document Revision 1.1, April, 2011 Copyright 2011, Measurement Computing Corporation All specifications are subject to change without notice. Typical for the range 0 to 60 C unless otherwise

More information

Temperature Transmitter itemp RTD DIN rail TMT 127

Temperature Transmitter itemp RTD DIN rail TMT 127 Technical Information TI 095R/09/en No. 51004790 Temperature Transmitter itemp RTD DIN rail TMT 127 Temperature Transmitter for Pt100 Resistance Thermometer Application Temperature transmitter with fixed

More information

Operating instructions. SINEAX VC604s Programmable Safety Value Converter

Operating instructions. SINEAX VC604s Programmable Safety Value Converter Operating instructions SINEAX VC60s Programmable Safety Value Converter VC60s Be Version 0 09. Camille Bauer AG Aargauerstrasse CH-560 Wohlen/Switzerland Phone + 56 6 Fax + 56 6 info@camillebauer.com www.camillebauer.com

More information

Theta 20A / 20V. Technical Data Sheet. Special Features

Theta 20A / 20V. Technical Data Sheet. Special Features Technical Data Sheet Theta 20A / 20V Theta 20A / 20V is used to measure and convert AC Voltage or Current input into a load independent DC current or voltage output signal. Special Features Available in

More information

DIGITAL PANEL METER N24 AND N25 METER SERIES

DIGITAL PANEL METER N24 AND N25 METER SERIES DIGITAL PANEL METER N24 AND N25 METER SERIES USER S MANUAL Contents 1. APPLICATION...5 2. METER SET...5 3. OPERATIONAL SAFETY...6 4. INSTALLATION...7 4.1 Fixing Way...7 4.2 External Connection Diagrams...8

More information

XIOC technology and networking modules

XIOC technology and networking modules / XIO XIO digitale and analog input/output modules XIO technology and networking modules XIO the compact I/O and much more XIO are local expansion modules for direct connection to all Xontrol controllers.

More information

RE92. CHECKMATE. Dual loop controller for industry purpose.

RE92. CHECKMATE. Dual loop controller for industry purpose. ! " # $ % & & ( ) * +. 0 1 2 3 4 5 8 9 6 : 7 ; * < + = >? @. A B C 0 D 1 E F G H 2 D I J 3? RE92. CHECKMATE. Dual loop controller for industry purpose. Simple and userfriendly service Safety and reliability

More information

5 years! Modular Housings. VariTrans P Warranty

5 years! Modular Housings. VariTrans P Warranty Modular Housings VariTrans P 27000 The Multimeter among the isolators. With 480 switchable calibrated ranges and broad-range power supply. The Task A wide range of measuring signals need to be galvanically

More information

SHIMADEN DIGITAL INDICATORS

SHIMADEN DIGITAL INDICATORS Shimaden, Temperature and Humidity Control Specialists C %RH Series SD16A & SHIMADEN DIGITAL INDICATORS approved,ul applied BASIC FEATURES compliance DIN Size 48 x 96 mm ±.3% High Accuracy Indication Large

More information

High-Voltage Isolation Amplifiers / Shunt Isolators. VariTrans P 29000

High-Voltage Isolation Amplifiers / Shunt Isolators. VariTrans P 29000 High-Voltage Isolation Amplifiers / Shunt Isolators VariTrans P 29000 Compact high-voltage isolators with safe galvanic isolation, VariPower broad-range power supply and genuine calibrated range selection.

More information

B850 Boiler House Energy Monitor

B850 Boiler House Energy Monitor Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Transmitter for temperature and direct current variables in four-wire circuit. Contrans T TEU 315, TEU 315-Ex, TEU 325, TEU 325-Ex 11-3.

Transmitter for temperature and direct current variables in four-wire circuit. Contrans T TEU 315, TEU 315-Ex, TEU 325, TEU 325-Ex 11-3. TEU 315, TEU 315-Ex, TEU 325, TEU 325-Ex Transmitter for temperature and direct current variables in four-wire circuit Transmitters TEU 315 and TEU 325 are designed for direct and alternating voltage measurement

More information

POINTAX 6000L2 Point Recorder

POINTAX 6000L2 Point Recorder GOSSEN METRAWATT CAMILLE BAUER Special Features 6 measuring channels Last printed point visible from front Electrically isolated, earth-free measuring channels Process signals ranging from 0/4... 20 ma,

More information

PROGRAMMABLE FIELD TEMPERATURE TRANSMITTER

PROGRAMMABLE FIELD TEMPERATURE TRANSMITTER Configuration Code TM01 Series 642 Programmable HART Field Temperature The Series 642 programmable HART field temperature transmitter is a 2-wire unit with analog output. It includes input for RTDs; resistance

More information

R24 DISPLAY MODULE WITH ACTIVE OUTPUT AND RELAY

R24 DISPLAY MODULE WITH ACTIVE OUTPUT AND RELAY Čapkova 22 678 01 Blansko tel.: +420 516 416942, 419995 fax: +420 516 416963 R24 DISPLAY MODULE WITH ACTIVE OUTPUT AND RELAY Display module is designed for measuring the resistance, the signal from the

More information

RMA42. Technical Information

RMA42. Technical Information Technical Information RMA42 Process transmitter with control unit Digital process transmitter for mounting on a top-hat rail for monitoring and visualizing analog measured values Application Plant and

More information

RI-D440. Three Phase easywire Multifunction DIN Rail Energy Meter. Telephone : +44 (0) Displayed Parameters

RI-D440. Three Phase easywire Multifunction DIN Rail Energy Meter. Telephone : +44 (0) Displayed Parameters RI-D440 Three Phase easywire Multifunction DIN Rail Energy Meter Four module DIN rail mounted Energy pulse LED 330mV Input from easywire CTs (or -/1A and -/5A current transformer input with TAS-SCTEWA

More information

â Ó itemp TC TMT128 Technical information DIN rail mounted Temperature Transmitter for Thermocouples (TC)

â Ó itemp TC TMT128 Technical information DIN rail mounted Temperature Transmitter for Thermocouples (TC) Technical information itemp TC TMT128 DIN rail mounted Temperature Transmitter for Thermocouples (TC) Application Temperature transmitter with fixed measuring ranges for converting TC input signals into

More information

General Specifications

General Specifications General Specifications MODEL UT50L Limit Controller GS 5DD-0E Overview The UT50L is an FM approved limit controller that can be configured either as a high limit or as a low limit controller by a user.

More information

ProLine P Precise Temperature Measurement at High Voltage Potentials up to 6.6 kv

ProLine P Precise Temperature Measurement at High Voltage Potentials up to 6.6 kv Precise Temperature Measurement at High Voltage Potentials up to 6.6 kv When temperatures are to be measured using Pt100 resistance thermometers in high-voltage environments, standard temperature transmitters

More information

JUMO Wtrans Receiver Universal Receiver for JUMO Wireless Measuring Probes

JUMO Wtrans Receiver Universal Receiver for JUMO Wireless Measuring Probes Data sheet 902931 Page 1/10 JUMO Wtrans Receiver Universal Receiver for JUMO Wireless Measuring Probes For processing physical measurands of the JUMO Wtrans series RS485 interface with Modbus protocol

More information

Technical Information Barrier RB223

Technical Information Barrier RB223 TI00132R/09/EN/13.14 71275790 Products Solutions Services Technical Information Barrier RB223 One or two-channel barrier Loop-powered barrier for the safe separation of 4 to 20 ma standard signal circuits

More information

Modicon Momentum automation platform 0

Modicon Momentum automation platform 0 Presentation, description Presentation The Momentum analog input bases enable acquisition of various analog values encountered in industrial applications, including: b b b b Standard high level (± 5 V,

More information

S200 I/O System Units

S200 I/O System Units S200 I/O System Units S200 I/O is a range of cost effective I/O units which are bus compatible with S200L I/O and can be mixed with them in any order on the same DIN rail. The S200 I/O System features

More information

JUMO Wtrans Receiver with Wireless Data Transmission

JUMO Wtrans Receiver with Wireless Data Transmission Data Sheet 902931 Page 1/10 JUMO Wtrans Receiver with Wireless Data Transmission k For measuring temperature, pressure, potentiometer, and voltage. k Interface RS485 with Modbus protocol k Wireless measured

More information

VariTrans P Compact automation solutions can be implemented thanks to the 17.5 mm modular housing and operation at temperatures up to 70 C.

VariTrans P Compact automation solutions can be implemented thanks to the 17.5 mm modular housing and operation at temperatures up to 70 C. ProLine Interface Technology Transducers for High Voltage / Shunt Applications Compact high voltage transducers with VariPower broad-range power supply and genuine calibrated range selection. The Task

More information

General Specifications

General Specifications General Specifications GS 05F01D01E MODEL UM351 Digital Indicator with Alarms with Active Color PV Display General Model UM351 Digital Indicator with Alarms is a precision alarm instrument provided with

More information

N24, N25 DIGITAL PANEL METER

N24, N25 DIGITAL PANEL METER DIGITAL PANEL METER www.sifamtinsley.co.uk USER S MANUAL Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters DIGITAL PANEL METER Current Transformers

More information

Temperature Measuring Amplifier IM34-11Ex-i IM34-12Ex-Ri 1-channel

Temperature Measuring Amplifier IM34-11Ex-i IM34-12Ex-Ri 1-channel Error Power Switching status 10 11 12 7 8 9 1 10 11 12 7 8 9 Temperature Measuring mplifier IM4-11Ex-i IM4-12Ex-Ri 1-channel IM4-12Ex-Ri IM4-11Ex-i 4 5 6 1 2 4 5 6 1 2 1-channel temperature measuring amplifier

More information