E5ER-T. Model Number Structure. Programmable Digital Controller. Model Number Legend

Size: px

Start display at page:

Download "E5ER-T. Model Number Structure. Programmable Digital Controller. Model Number Legend"

Nora King
5 years ago
Views:

Programmable igital ontroller EER-T SM_EER-T_S_E new 8 9-mm High-speed, Highprecision igital ontroller that is Programmable reate up to programs with up to segments total. 0.

1 Programmable igital ontroller EER-T SM_EER-T_S_E new 8 9-mm High-speed, Highprecision igital ontroller that is Programmable reate up to programs with up to segments total. 0.0 High resolution for Pt input. High-speed sampling at 0 ms. Settings easily made from a computer using the X-Thermo. RoHS compliance for world-wide application. Refer to Safety Precautions for ll E@R s. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Number Structure Number Legend Note: When your order, specify the power supply voltage. EER-T@@@@@@@@-@@@ ontrol method Blank:Standard or heating/cooling control P: Position proportional control. Output R: NO relay output NO relay output Q: Pulse output/current output pulse output : current output. Output R: NO relay output NO relay output Q: Pulse output/current output pulse output : current output. uxiliary Outputs Blank:None : NO relay output NO relay output T: transistor outputs. ommunications Blank: None : RS-8 communications. Optional Function Blank: None : event inputs 7. Input B: Universal-input and event inputs F: Universal-input and FB W: Universal-input and universal-input 8. Input Blank: None W: Universal-input and universal-input 9. Other FLK: ompoway/f communications ( digits): (Modification type) Note: The above model number legend is intended as a functional description of models. Not all possible combinations of functions are available. onfirm model availability in Ordering Information when ordering. Note: Be sure to read the precautions for correct use and other precautions in the following user's manual before using the igital ontroller. ER/ER igital ontroller User's Manual (at. No. Z8)

2 Ordering Information EER-T igital ontrollers When your order, specify the power supply voltage. Programmable igital ontrollers (00 to 0 V) Size ontrol type ontrol mode Outputs (control/ transfer) 8 9 mm Basic control ( loop) Standard control Heating and cooling control -loop control -loop standard control Single-loop heating and cooling control Single-loop cascade control Single-loop control with remote SP Single-loop proportional control ontrol valve control ( loop) Note : The outputs are transistor output. Programmable igital ontrollers ( V/) Note : The outputs are transistor output. Single-loop position-proportional control Relay outputs ( open, closed) Optional functions Event inputs uxiliary outputs (SUB) Serial communications (pulse pulse/current) None EER-TQB (current current) EER-TB (pulse pulse/current) RS-8 EER-TQB-FLK (pulse pulse/current) RS-8 EER-TQTW-FLK (See Note (current current).) EER-TTW-FLK Relay outputs ( open, closed) and current Size ontrol type ontrol mode Outputs (control/ transfer) 8 9 mm Basic control ( loop) Standard control Heating and cooling control -loop control -loop standard control Single-loop heating and cooling control Single-loop cascade control Single-loop control with remote SP Single-loop proportional control ontrol valve control ( loop) Single-loop position-proportional control Relay outputs ( open, closed) (See Note.) None EER-TPRTF None RS-8 EER-TPRQF- FLK Optional functions Event inputs uxiliary outputs (SUB) Serial communications (pulse pulse/current) None EER-TQB (current current) EER-TB (pulse pulse/current) RS-8 EER-TQB-FLK (pulse pulse/current) RS-8 EER-TQTW-FLK (See Note (current current).) EER-TTW-FLK Relay outputs ( open, closed) and current (See Note.) None EER-TPRTF None RS-8 EER-TPRQF- FLK Inspection Results If an inspection report is required, it can be ordered at the same time as the igital ontroller using the following model number. Inspection Report (Order Separately) EER-K ccessories (Order Separately) Rubber Packing Y9S-P Note: The Rubber Packing is provided with the igital ontroller. Mounting dapters Y9H-9 Terminal over escriptions Terminal over for EER E-OV Note: These Mounting dapters are provided with the igital ontroller.

3 Specifications Ratings EER-T Supply voltage (See note.) Operating voltage range E Marking 00 to 0 V, 0/0 Hz V, 0/0 Hz; V UL certification 00 to 0 V, 0/0 Hz 8% to 0% of rated supply voltage Power consumption 7 V max. (with maximum load) V/7 W max. (with maximum load) Sensor input (See note.) Thermocouple: K, J, T, E, L, U, N, R, S, B, W Platinum resistance thermometer: Pt00 urrent input: to 0 m, 0 to 0 m (including remote SP input) Voltage input: to V, 0 to V, 0 to 0 V (including remote SP input) (Input impedance: 0 Ω for current input, approx. MΩ for voltage input) ontrol output Voltage (pulse) output V, 0 m max. with short-circuit protection circuit 0 to 0 m, to 0 m ; load: 00 Ω max. (including transfer output) (Resolution: pprox.,000 for 0 to 0 m ; pprox.,000 for to 0 m ) Relay output Position-proportional control type (open, closed) N.O., 0 V, (including inrush current) Relay Output N.O., 0 V, (resistive load) Transistor Output Maximum load voltage: 0 V; Maximum load current: 0 m; Residual voltage:. V max.; Leakage current: 0. m max. Potentiometer input 00 Ω to. kω ontact Input ON: kω max.; OFF: 00 kω min. No-contact Input ON: Residual voltage of. V max.; OFF: Leakage current of 0. m max. Short-circuit: pprox. m Remote SP input Refer to the information on sensor input. Transfer output Refer to the information on control output. ontrol method -PI or ON/OFF control Setting method igital setting using front panel keys or setting using serial communications Indication method 7-segment digital display and single-lighting indicator haracter Height PV display: 9. mm; SV display: 7. mm; MV display: 7. mm Other functions epends on model. mbient operating temperature 0 to (with no icing or condensation) For years of assured use: 0 to 0 (with no icing or condensation) mbient operating humidity % to 8% Storage temperature to (with no icing or condensation) Note : o not use an inverter output as the power supply. (Refer to Safety Precautions for ll E@R s.) : The supply voltage (i.e., 00 to 0 V or V/V) depends on the model. Be sure to specify the required type when ordering. : The ontroller is equipped with multiple sensor input. Temperature input or analog input can be selected with the input type setting switch. There is basic insulation between power supply and input terminals, power supply and output terminals, and input and output terminals. Input Ranges Platinum Resistance Thermometer, Thermocouple, urrent, or Voltage Input Input type Name Temperature range ( ) Platinum resistance thermometer Thermocouple urrent Voltage Pt00 K J T E L U N R S B W m V W/Re ( - ) Note: The shaded area indicates the setting status at the time of purchase. 0 to 0 to 0 to to 0 Setting Minimum setting unit (SP and alarm) Input type setting switch Set to T.PT. 0. T.PT IN TYPE NLOG 0 to 0 (epends on scaling and number of decimal places.) Set to NLOG T.PT IN TYPE NLOG

4 haracteristics EER-T Indication accuracy Thermocouple input with cold junction compensation: (±0.% of PV or ±, whichever is greater) ± digit max. (See note.) Thermocouple input without cold junction compensation: (±0.% FS or ±, whichever is smaller) ± digit (See note.) nalog input: ±0.% FS ± digit max. Platinum resistance thermometer input: (±0.% of PV or ±0., whichever is greater) ± digit max. Position-proportional potentiometer input: ±% FS ± digit max. ontrol mode Influence of temperature Influence of voltage Influence of EMS. (at EN-) ontrol period Proportional band (P) Standard control (heating or cooling control), heating/cooling control, standard control with remote SP (-input models only), heating/cooling control with remote SP (-input models only), cascade standard control (-input models only), cascade heating/cooling control (-input models only), proportional control (-input models only), position-proportional control (control-valve control models only) Thermocouple input (R, S, B, W): (±% of PV or ±0, whichever is greater) ± digit max. Other thermocouple input: (±% of PV or ±, whichever is greater) ± digit max. *K-type thermocouple at -00 max.: ±0 max. Platinum resistance thermometer: (±% of PV or ±, whichever is greater) ± digit max. nalog input: (±%FS) ± digit max. 0. to 99.0 s (in units of 0. s) for time-proportioning control output 0.00% to % FS (in units of 0.0% FS) Integral time (I) 0.0 to,999.9 s (in units of 0. s) erivative time () 0.0 to,999.9 s (in units of 0. s) Hysteresis 0.0% to 99.99% FS (in units of 0.0% FS) Manual reset value 0.0% to 00.0% (in units of 0.% FS) larm setting range 9,999 to 99,999 EU (See note.) (The decimal point position depends on the input type and the decimal point position setting.) Input sampling period 0 ms Insulation resistance 0 MΩ min. (at 00 V) ielectric strength,000 V, 0/0 Hz for min (between charged terminals of different polarities) Vibration resistance 0 to Hz, 0 m/s for 0 min each in X, Y, and Z directions (malfunction) Shock resistance 00 m/s, times each in X, Y, and Z directions (malfunction) Inrush current 00 to 0-V models: 0 max. V/V models: 0 max. Weight ontroller only: pprox. 0 g; Mounting bracket: pprox. 0 g; Terminal cover: pprox. g egree of protection Front panel: NEMX for indoor use; Rear case: IP0; Terminals: IP00 Memory protection Non-volatile memory (number of writes: 00,000) pplicable standards UL 00-, S. No. 00- (Power supply voltage: 00 to 0 V): Pollution degree /Overvoltage category EN 00- (IE 00-) (Power supply voltage: 00 to 0 V): Pollution degree /Overvoltage category EM EMI: EN- (See note.) Radiated Interference Electromagnetic Field Strength: EN0 Group lass Noise Terminal Voltage: EN0 Group lass EMS: EN- (See note.) ES Immunity: EN000--: kv contact discharge (level ) 8 kv air discharge (level ) Electromagnetic Immunity: EN000--: 0 V/m (amplitude-modulated, 80 MHz to GHz,. GHz to GHz) (level ) Burst Noise Immunity: EN000--: kv power line (level ) kv output line (relay output) (level ) kv measurement line, I/O signal line (level ) kv communications line (level ) onducted isturbance Immunity: EN000--: V (0. to 80 MHz) (level ) Surge Immunity: EN000--: kv line to line (power line, output line (relay output)) (level ) kv line to ground (power line, output line (relay output)) (level ) Power Frequency Magnetic Field Immunity: EN000--8: 0 /m (0 Hz) continuous field Voltage ip/interrupting Immunity: EN000--: 0. cycle, 00% (rated voltage) Note : K-, T-, or N-type thermocouple at 00 max.: ± ± digit max. U- or L-type thermocouple: ± ± digit max. B-type thermocouple at 00 max.: No accuracy specification. R- or S-type thermocouple at 00 max.: ± ± digit max. W-type thermocouple: (±0.% of PV or ±, whichever is greater) ± digit max. : U- or L-type thermocouple: ± ± digit R- or S-type thermocouple at 00 max.: ±. ± digit : EU (Engineering Unit) represents the unit after scaling. If a temperature sensor is used, it is either or F. : Industrial electromagnetic environment (EN/IE - Table )

5 ommunications Specifications EER-T Transmission path connection ommunications method Synchronization method Baud rate Transmission code ata bit length Stop bit length Multiple points Program ontrol Functions RS-8 (two-wire, half duplex) Start-stop synchronization 9,00, 9,00, or 8,00 bps SII 7 or 8 bits or bits Error detection Vertical parity (none, even, odd) Block check character (B): ompoway/f R-: Modbus Flow control None Interface RS-8 Retry function None ommunications buffer 7 bytes ommunications response send wait time 0 to 99 ms, efault: 0 ms Number of programs (patterns) (with 8 segments/program) Number of segments (steps) (with 8 programs) Maximum number of segments Segment setting method Time setting (Segment set with set point and time.) Gradient setting (Segment set with set point, gradient, and time.) Segment times 0 h 0 min to 99 h 9 min 0 min 0 s to 99 min 9 s 0 min 00.0 s to 99 min 9.9 s larm group number Number of sets specifications Setting method Set separately for each program. Reset operation Select either stopping control or fixed SP operation. Startup operation Select continuing, resetting, manual operation, run mode, or ramp back operation. PI sets Number of sets 8 Setting method Set separately for each program (automatic PI group selection also supported). larm SP function Select from ramp SP and target SP. Program status Segment operation dvance, hold, and back control Program operation Program repetitions and program links Wait operation Wait method Select from waiting at segment ends and always waiting. Wait width setting Wait width upper limit and lower limit set separately for each program. Setting method ON/OFF setting for each segment Time signals Number of outputs Number of ON/OFF each per output operations Setting method Set separately for each program. Segment outputs Number of outputs 0 Setting method ON/OFF set for each segment. Program status output Program end output (pulse width can be set) Segment number output Program startup PV start Select from segment set point, gradient-priority PV start, and time-priority PV start. operation Standby Standby Operation end operation Select from resetting, continuing control at final set point, and fixed SP control. Number of event inputs 0 max.

6 Wiring Terminals EER-T EER-T (Programmable Type) EER-TQB V/ 00 to 0 V 00 to 0 V or V/ (no polarity) OUT Voltage output V 0 m OUT Voltage output V 0 m or to 0 m, 00 Ω max. 0 to 0 m, 00 Ω max. EER-TB B (Relay output) V/ 00 to 0 V B (Relay output) SUB SUB SUB SUB 00 to 0 V or SUB V/ (no polarity) SUB SUB SUB EV EV OUT EV EV to 0 m, 00 Ω max. 0 to 0 m, 00 Ω max. (Switched by output type setting.) OUT E T PT V I to 0 m, 00 Ω max. 0 to 0 m, 00 Ω max. E (Thermocouple) T PT V (Voltage) I (urrent) (Thermocouple) (Voltage) (urrent) EER-TQB-FLK V/ 00 to 0 V 00 to 0 V or V/ (no polarity) B() OUT RS-8 () Voltage output V 0 m OUT Voltage output V 0 m or to 0 m, 00 Ω max. 0 to 0 m, 00 Ω max. OUT to 0 m, 00 Ω max. 0 to 0 m, 00 Ω max. (Switched by output type setting.) OUT to 0 m, 00 Ω max. 0 to 0 m, 00 Ω max. B E (Relay output) SUB SUB SUB SUB EV EV T PT V I (Thermocouple) (Voltage) (urrent) Note The power supply voltage must be 00 to 0 V or V/ for the EER-T to comply with E marking requirements. The power supply voltage must be 00 to 0 V or V/ for the EER-T to comply with UL requirements.

7 EER-TQTW-FLK (-loop ontrol) EER-TTW-FLK (-loop ontrol) EER-T V/ 00 to 0 V 00 to 0 V or V/ (no polarity) B() OUT RS-8 () Voltage output V 0 m OUT Voltage output V 0 m or to 0 m, 00 Ω max. 0 to 0 m, 00 Ω max. (Transistor output) SUB SUB B EV EV EV EV T PT E T PT Input V I Input V I (Thermocouple) (Voltage) (urrent) V/ 00 to 0 V 00 to 0 V or V/ (no polarity) OUT B() RS-8 () to 0 m, 00 Ω max. 0 to 0 m, 00 Ω max. (Switched by output type setting.) OUT to 0 m, 00 Ω max. 0 to 0 m, 00 Ω max. (Transistor output) SUB SUB B E EV EV EV EV T PT V T PT V (Thermocouple) (Voltage) Input I Input I (urrent) EER-TPRTF EER-TPRQF-FLK V/ 00 to 0 V OUT OUT 00 to 0 V or V/ (no polarity) Relay output 0 V losed Open (Transistor output) SUB SUB B EV EV EV EV O Potentiometer W E T PT V I (Thermocouple) (Voltage) (urrent) V/ 00 to 0 V 00 to 0 V or V/ (no polarity) B() RS-8 () OUT OUT Relay output 0 V losed Open OUT Voltage output V 0 m OUT Voltage output V 0 m or to 0 m, 00 Ω max. 0 to 0 m, 00 Ω max. B E (Relay output) SUB SUB SUB SUB O W (Thermocouple) Potentiometer T PT V (Voltage) I (urrent) Note The power supply voltage must be 00 to 0 V or V/ for the EER-T to comply with E marking requirements. The power supply voltage must be 00 to 0 V or V/ for the EER-T to comply with UL requirements. 7

8 Nomenclature EER-T EER-T Operation Indicators SUB SUB SUB SUB WIT FSP Rear PV isplay No. SV isplay No. H MW MNU PRG. SEG isplay No. OUT OUT RST RSP HOL Mode Key own Key Level Key Up Key PF PF RUN/RST EER Function Key / Run/Reset Key Function Key imensions Note: ll units are in millimeters unless otherwise indicated. EER-T SUB SUB SUB SUB W I T FSP PV SV 9 H MW MNU PRG. SEG 9 H MW MNU OUT OUT RST RSP HOL PF PF RUN/RST EER Panel utouts Mounting Bracket (ccessory) rimp terminal size: M Terminal cover (E-OV; order separately) min. 0 min Recommended panel thickness is to 8 mm. Group mounting is not possible. (Maintain the specified mounting space between ontrollers.) When two or more ontrollers are mounted, make sure that the surrounding temperature does not exceed the allowable operating temperature specified in the specifications. 8

9 ccessories (Order Separately) EER-T Terminal over E-OV (for EER) Unit Label Sheet Y9S-L.8.8 Rubber Packing Y9S-P (for IN8 9) Order the Rubber Packing separately if it becomes lost or damaged. (Refer to page.) The Rubber Packing can be used to achieve an IP degree of protection. (eterioration, shrinking, or hardening of the rubber packing may occur depending on the operating environment. Therefore, periodic replacement is recommended to ensure the level of waterproofing specified in NEM. The time for periodic replacement depends on the operating environment. Be sure to confirm this point at your site. onsider one year a rough standard. OMRON shall not be liable for the level of water resistance if the customer does not perform periodic replacement.) The Rubber Packing does not need to be attached if a waterproof structure is not required. Mounting dapters Y9H-9 (pcs) 7 8. One set is packaged with the product. Order Mounting dapters separately if yours are lost or damaged. 0. LL IMENSIONS SHOWN RE IN MILLIMETERS. To convert millimeters into inches, multiply by To convert grams into ounces, multiply by In the interest of product improvement, specifications are subject to change without notice. 9

10 Terms and onditions greement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MKES NO WRRNTY OR REPRESENTTION, EXPRESS OR IMPLIE, BOUT NON-INFRINGEMENT, MERHNTBILITY OR FITNESS FOR PRTIULR PURPOSE OF THE PROUTS. BUYER KNOWLEGES THT IT LONE HS ETERMINE THT THE PROUTS WILL SUITBLY MEET THE REQUIREMENTS OF THEIR INTENE USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron s sole obligation hereunder shall be, at Omron s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron ompanies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. ny advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON PNIES SHLL NOT BE LIBLE FOR SPEIL, INIRET, INIENTL, OR ONSEQUENTIL MGES, LOSS OF PROFITS OR PROUTION OR MERIL LOSS IN NY WY ONNETE WITH THE PROUTS, WHETHER SUH LIM IS BSE IN ONTRT, WRRNTY, NEGLIGENE OR STRIT LIBILITY. Further, in no event shall liability of Omron ompanies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron ompanies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer s application or use of the Product. t Buyer s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PROUT FOR N PPLITION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LRGE QUNTITIES WITHOUT ENSURING THT THE SYSTEM S WHOLE HS BEEN ESIGNE TO RESS THE RISKS, N THT THE OMRON PROUT(S) IS PROPERLY RTE N INSTLLE FOR THE INTENE USE WITHIN THE OVERLL EQUIPMENT OR SYSTEM. Programmable Products. Omron ompanies shall not be responsible for the user s programming of a programmable Product, or any consequence thereof. Performance ata. ata presented in Omron ompany websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron s test conditions, and the user must correlate it to actual application requirements. ctual performance is subject to the Omron s Warranty and Limitations of Liability. hange in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron ompanies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. OMRON orporation Industrial utomation ompany In the interest of product improvement, specifications are subject to change without notice. (c)opyright OMRON orporation 0 ll Right Reserved.

Programmable Digital Controller

Programmable Digital Controller Programmable igital ontroller ER-T/EER-T new High-speed, High-precision igital ontroller that is Programmable reate up to programs with up to segments total. oordinated operation for up to four channels