General Specifications

Size: px
Start display at page:

Download "General Specifications"

Transcription

1 General Specifications MODEL UM0 Digital Indicator with Alarms GS 0F0D00E General Model UM0 Digital Indicator with Alarms is a precision alarm instrument with universal input /8DIN. For excellent monitoring operability, it displays process variables on a large display. It is also provided with four alarm setting points (or setting outputs; one is optional). A retransmission output and V DC loop power supply are provided as standard. A communication fanction or V DC loop power supply is available optionally. Main Features Extralarge digital display allows the indicated values to be read even from a long distance. LEDs of 0mm height are used for the process variable display. Universal input allows simple setting of the input types (TC, RTD, DCV) or input measuring range. Various communication function are provided. Communication is possible with personal computer and programable logic controller. Function Specifications Signal Computation Function Measured input computation: Bias addition (00.0 to 00.0% of measured input range width.), firstorder lag filter (time constant off, to 0 s.) Contact input: Retains and displays maximum and minimum readings from measured variable. Resets the maximum and minimum readings. UM0 UM0E E indicates the model with expanded functions. Alarm Function Six different types of alarms are provided. If an alarm occurs, the alarm lamp indicates it. Four (one is optional) of the six can be used as relay contact outputs. Alarm types: high limit, low limit, Deenergized on high limit, Deenergized on low limit, Fault diagnosis, and FAIL output Setting ranges for process variable alarms: alarms; 00.0 to 00.0% of measured input range. Alarm hysteresis width; 0.0 to 00.0% of measured input range width. Delay timer: 0.00 to 99.9 (minute, second) An alarm is output when the delay timer expires after the alarm setpoint is reached. Setting for each alarm is possible. Fault diagnosis alarm: Input burn out, A/D conversion error, TC RJC error FAIL output: Software failure, hardware failure Standby action: Standby action can be set to make alarm OFF during startup. Display and Operation function display: digit digital display for engineering data Parameter display: digit digital display for various data, including parameters Status display: alarm LEDs (,,, ) Operation keys: and keys: Increase/decrease setpoints or various parameters. key: Sets setpoint data, calls or switches various parameters. GS 0F0D00E Copyright Feb. 000 st Edition Mar. 000

2 MAN MAN MAN MAN MAN MAN MAN MAN <<Contents>> <<Index>> SELECT display: Allows selection and registration of frequently changed parameters from the operation parameters during operation. For example, if the first alarm setpoint is registered in the SELECT display, the setpoint can easily be displayed during operation. Security function: An operation inhibiting mode using a password is provided. Communication Functions (optional) The communication function, provided with the instrument, allows connection to a personal computer, and programmable logic controller. Communication protocol Computer link communication: Communication protocol with a personal computer Ladder communication: Communication protocol with programmable logic controller. MODBUS Communication: Communication protocol with a personal computer or PLC. Communication interface Communication protocol: Computer link, ladder communication or MODBUS communication Standard: EIA RS8 Maximum number of connectable controllers: GREEN series controllers Maximum communication distance:,00 m Communication method: Twowire half duplex, or fourwire half duplex, startstop synchronization system, protocol free Communication rate: 00, 00, 00, 800, 900 bps LED display unit (for ) Display, and error code when error is detected. Status lamps Indicate alarm status (,,, ). LED display unit Display setting item/value of parameters. Operational keys Increase/Decrease the setting data (, ) Select parameter/enter the setting data () Sample Structures of Communication Systems Configuration Diagram () Computer link communication/modbus communication () Ladder communication Personal computer MELSECA PLC UM0/UM0 Digital indicator with Alarms UM0/UM0 Digital indicator with Alarms All Rights Reserved. Copyright 000, Yokogawa M&C Corporation GS 0F0D00E st Edition Mar.,00000

3 Hardware Specifications Measured input signal Number of inputs: Input type, measurement range, and measurement accuracy: The type of input and measurement range can be specified using the input range code shown in the table below by front key operation or communication. Sampling period: 0ms Burnout detection: Available with TC, RTD, standard signal, 0. to V DC and to V DC. Upscale, downscale, and off can be set. For standard signal, an input of 0.V or less is regarded as burnout. Input bias current: 0.0 µa (for TC and RTD bterminal) Measuring current(rtd): about 0.mA Input resistance: TC/mV: MΩ or more DC voltage input: Approximately MΩ Allowable signal source resistance: TC/mV input: 0Ω or less Effect from allowable signal source resistance:0. µv/ Ω or less DC voltage input: kω or less Effect from allowable signal source resistance: 0.0%/00Ω or less Allowable leadwire resistance: RTD 0Ω/wire or less (provided that there is no variation between the three wires.) For the range of 0.0 to 0.0, 0Ω/wire Effect from allowable leadwire resistance: ±0. C/0Ω or less Allowable input voltage: TC/mV/RTD ±0V DC DC voltage ±0V DC Noise rejection ratio: Normal mode 0dB (0/0Hz) or more Common mode 0dB (0/0Hz) or more Referencejunction compensation error: ±.0 C ( to C), ±. C (0 to C, to 0 C) Applicable standard: For TC and RTD, JIS, IEC, DIN(ITS 90) Thermocouple Input Type K J T B S R N E L (DIN) U (DIN) W (DIN) Platinel PR00 Input range code Instrument range ( C) 00 to 0 C 99.9 to C 99.9 to 00.0 C 99.9 to C 99.9 to 00.0 C 0.0 to 00.0 C 0 to 800 C 0 to 00 C 0 to 00 C 00 to 00 C 99.9 to C 99.9 to C 99.9 to 00.0 C 0.0 to 00.0 C 0 to 00 C 0 to 90 C 0 to 900 C Instrument range ( F) 00 to 00 F 0 to 00 F 99.9 to F 00 to 00 F 00 to 0 F 99.9 to 0.0 F to 00 F to 00 F to 00 F 00 to 00 F 00 to 800 F 00 to 00 F 00 to 0 F 99.9 to 0.0 F to 00 F to 00 F to 00 F Measurement accuracy * Unspecified(when shipped from the factory) OFF Set the data item input Type "IN" to the OFF option to leave the input type undefined. RTD W9ReWRe JPt00 Pt to 000 C 99.9 to 00.0 C 0.0 to 0.0 C 99.9 to 80.0 C 99.9 to 00.0 C 0.0 to 0.0 C to 00 F 99.9 to F 99.9 to 00.0 F 00 to 0 F 99.9 to F 99.9 to 00.0 F Standard 0. to V to.000 Scaling is enable in the signal to V.000 to.000 following range. DC voltage 0 to V 0 to 0V 0 to 0mV 0 to 00mV to to to to to to to to Note : The accuracy is ±0. C of instrument range ± digit for a temperature range from 0 to 00 C Note : The accuracy is ±0. C of instrument range ± digit for a temperature range from 00 to 00 C. * Performance in the standard operating conditions (at ± C, ±0% RH, and 0/0 Hz power frequency) At or above 0 C ±0.% ± digit of F.S. Below 0 C, ±0.% ± digit of F.S. At or above 00 C ±0.% ± digit of F.S. Below 00 C ±% ± digit of F.S. ±0.% ± digit of F.S. ±0.% ± digit of F.S. Below 0 C ±0.% ± digit of F.S. At or above 0 C ±0.% ± digit of F.S. Below 0 C ±0.% ± digit of F.S. ±0.% ± digit of F.S. ±0.% ± digit of F.S. At or above 800 C ±0.% ± digit of F.S. Below 800 C, not guaranteed ±0.% ± digit of F.S. (Note) (Note) ±0.% ± digit of F.S. (Note) ±0.% ± digit of F.S. (Note) (Note) ±0.% ± digit of F.S. (Note) ±0.% ± digit of F.S. ±0.% ± digit of F.S. All Rights Reserved. Copyright 000, Yokogawa M&C Corporation GS 0F0D00E st Edition Mar.,00000

4 V DC Loop Power Supply for Sensor Supplies power to the wire transmitter. A resister (0 to 0Ω) is to be placed between the alarm unit and transmitter. Current signals are converted into voltage signals, and read through the process input. Supply voltage is. to 8.0V DC, maximum supply current is about 0mA (only for models with V DC loop power supply). V DC Power Supply Wiring to Twowire Sensor Twowire transmitter 0mADC External resistor (Note) 0Ω input to V DC signal Loop power supply. to 8.0 V DC Note: Connecting a 0 Ω resistor to the terminals is optional. Model: X000 (resistor with M. crimpon terminal lugs) Retransmission Output Either or target set point is output. Either this or the V DC loop power supply is available. Number of output point: Output signal: to 0mA DC Onload resistance: 00 Ω or less Output accuracy: ±0.% of the span Performance in the standard operating conditions (at ± C, ±0% RH, and 0/ 0 Hz power frequency) V DC loop power supply: Power supply voltage. to 8.0V DC; maximum supply current approximately ma. (Safety circuit against shortcircuiting in the field) Contact Input Usage: Resets the displayed maximum and minimum process variables. Number of inputs: point Input type: Nonvoltage contact input or transistor open collector input Input contact capacity: V DC, 0mA or more (for nonvoltage contact input) On/off determination: For nonvoltage contact input, ON = contact resistance of kω or less, OFF = contact resistance of 0kΩ or more. For transistor contact input, ON = V or less, OFF = leak current of 00µA or less. Minimum retention time for status detection: about s. Contact Outputs Usage: Alarm output, FAIL output Number of relay contact outputs: points (The alarm is optional) Alarm to relay contact rating: 0V AC A, or 0V DC A, make contact Alarm relay contact rating: 0V AC A, or 0V DC A (load resistance) Output signal: terminals (NC, NO, Common), transfer contact Display Unit Specifications Process variable display unit: digit segment red LED, each digit 0 mm in height Parameter display: digit segment red LED, each digit 9. mm in height Status indicating lamps: LEDs Conformance to Safety and EMC standards Safety standard: Conforms to IEC00: 990 and EN00: 99. Certified for CSA00, The overvoltage category of each input is CAT II (IEC00) Certified for UL 08 EMC standards: Conforms to the following EMC standards. During evaluation, the instrument operates with the measuring accuracy within ±0% of the range. EMI (Emission) EN: 99Am:998 EMS (immunity) EN: 99Am:998 Construction/Installation/Wiring Structure: Dustproof and Dripproof front panel conforming to IP. Body construction: ABS resin and polycarbonate Case color: Black Weight: Approximately kg or less Dimensions: 9W 8H 00D (from the front panel) (mm) Mounting: Direct panel mounting; mounting bracket, one each for right and left mounting. Panel cutout dimensions: (W) 0. 0 (H) mm Mounting attitude: Up to 0 degrees above the horizontal. No downward tilting allowed. Wiring: M. screw terminal (signals, power supply/ ground) Power supply / Isolation Power supply: Voltage rating at 00 to 0V AC (±0%), 0/0 Hz Power consumption: MAX. 0VA (MAX. 8.0W) Memory backup: Nonvolatile memory (Service life approx. 000,000 times of writings) Withstanding voltage: Between primary terminal and secondary terminal: 00V AC for min. (Note) Between primary terminal and ground terminal: 00V AC for min. (Note) Between ground terminal and secondary terminal: 00V AC for min. Between two secondary terminal: 00V AC for min Primary terminal: Power supply, relay output Secondary terminal: Analog input/output signal terminals, contact input terminal Note. The withstanding voltage is specified as 00V AC perminute to provide amargin of safety. Isolation resistance: Between power supply terminal and Ground: ground terminal, 00V DC 0MΩ or more Class grounding (grounding resistance of 00Ω or less) Isolation specifications Measured input terminal:. Not isolated from the internal circuit. V DC loop power supply terminals for sensor: All Rights Reserved. Copyright 000, Yokogawa M&C Corporation GS 0F0D00E st Edition Mar.,00000

5 Retransmission output terminal: Contact input terminal: Not isolated from communication terminals. Relay contact output terminal: RS8 communication terminals: Not isolated from contact input terminals. Isolated from other I/O terminals and internal circuit. Power supply terminal:, Ground terminal:, Environmental conditions Normal operating conditions: Ambient temperature: 0 to 0 C 0 to 0 C when using V DC loop power supply for sensor Ambient temperature change limit: 0 C /h or less Ambient humidity: 0 to 90% RH (noncondensing) Magnetic field: 00 A/m or less Continuous vibration ( to Hz): Amplitude of. mm or less Continuous vibration ( to 0 Hz):.9 m/s or less Shortperiod vibration:. m/s, s. or less Shock: m/s or less, ms. Installation altitude:,000 m above sea level maximum Warmup time: 0minutes or more Transit/storage conditions Temperature: to 0 C Temperature change limit: 0 C /h or less Humidity: to 9% RH (noncondensing) Effects on operating conditions Effect of ambient temperature: For voltage/tc input, within ±µv/ C and ±0.0% of F.S./ C, whichever is greater. For RTD input, within ±0.0 C/ C (ambient temperature) For analog output, ±0.0% of F.S./ C or less Effect on power supply flactuation (within rated voltage range): For analog input, within ± µv/0v and ±0.0% of F.S./0V, whichever is greater. For analog output, within ±0.0% of F.S./ 0V All Rights Reserved. Copyright 000, Yokogawa M&C Corporation GS 0F0D00E st Edition Mar.,00000

6 <<Contents>> <<Index>> Standard Type, Terminal Arrangements Receiving 0 ma DC Current Signals with the Indicator * When receiving 0 ma DC current signals, set the input type to V DC (setpoint ). TC input RTD input * retransmission is configured at factory before shipment. Retransmission output 0 Ω 0 ma A 0 ma DC b Load resistance: 00 Ω or less B Note: Connecting a 0 Ω resistor to the terminals is optional. Model: X000 (resistor with M. crimpon terminal lugs) * If V DC loop power supply is used, retransmission output cannot be used. V DC loop power supply mv/v input NOTE Installation category (overvoltage category): II (IEC00) Contact input.8.0 V DC ( ma DC max.) V Transistor contact DI 9 Contact 9 UM DI Resets the peak and bottom values when DI is changed from OFF to ON. * Wiring can only be carried out for indicators with V DC loop power supply. 0 0 Common Contact rating: V DC, 0 ma Min V DC (0 ma DC max.) RS8 communication * Wiring can only be carried out for indicators with communication functions. Maximum baud rate: 900 bps SDB() SDA() Alarm output Relay contact output RDB() * Wiring can only be carried out for UM00 or UM00. RDA() NC NO SG Power supply Power supply Contact rating: 0 V AC, A 0 V DC, A (resistance load) 8 L UM CAUTION input * Not configured at factory before shipment V DC loop power supply Alarm output Alarm output Before carrying out wiring, turn off the power to the controller and check that cables to be connected are not alive with a tester or the like because there is a possibility of electric shock. 9 0 N Relay Allowable range: 00 to 0 V AC ( 0%) (free voltage) 0/0 Hz shared Alarm output Alarm output Common Relay contact rating: 0 V AC, A 0 V DC, A (resistance load) * Wiring can only be carried out for indicators with V DC loop power supply. V DC Power Supply Wiring to Twowire Sensor V DC Power Supply Wiring to Twowire Sensor input to V DC signal 0 V External resistor (Note) input 0. to.0 V DC signal 00 External resistor (Note) Twowire transmitter Twowire transmitter Loop power supply. to 8.0 V DC Loop power 0 ma DC supply. to 8.0 V DC 0 ma DC Note: Connecting a 0 resistor to the terminals is optional. Model: X000 (resistor with M. crimpon terminal lugs) Note: Connecting a 00 resistor to the terminals is optional. Model: X0000 (resistor with M. crimpon terminal lugs) All Rights Reserved. Copyright 000, Yokogawa M&C Corporation GS 0F0D00E st Edition Mar.,00000

7 External Dimensions and Panel Cutout Dimensions Small bracket 9.8 Small bracket Unit: mm Front of indicator to 0 mm (Panel thickness) General installation min. () 0 min () Model and Suffix Codes UM0 Type Model Suffix Code Description Digital indicator with Alarms (provided with retransmission output and V DC loop power supply as standard) 0 Standard type with three alarms Standard type with three alarms (with a V DC loop power supply) Optional functions 0 None Communication and additional alarm Additional alarm Standard accessories: Brackets (mounting hardware), unit label, and User s Manuals, Items to be Specified When Ordering Model and suffix codes, necessary/unnecessary of User s Manual or QIC. All Rights Reserved. Copyright 000, Yokogawa M&C Corporation GS 0F0D00E st Edition Mar.,00000

General Specifications

General Specifications General Specifications Model UM330 Digital Indicator with Alarms GS 05F0D00E General Model UM330 Digital Indicator with Alarms is a precision alarm instrument with universal input /8DIN. For excellent

More information

General Specifications

General Specifications General Specifications Model UM350 Digital Indicator with Alarms GS 05F0D00E General Model UM350 Digital Indicator with Alarms is a precision alarm instrument with universal input. For excellent monitoring

More information

General Specifications

General Specifications General Specifications GS 05F01D01E MODEL UM351 Digital Indicator with Alarms with Active Color PV Display General Model UM351 Digital Indicator with Alarms is a precision alarm instrument provided with

More information

General Specifications

General Specifications General Specifications GS 0F01D0E Model UM1 Digital Indicator with Alarms with Active Color PV Display General Model UM1 Digital Indicator with Alarms is a precision 1/8 DIN alarm instrument provided with

More information

General Specifications

General Specifications General Specifications GS 0F01D01E Model UM1 Digital Indicator with Alarms with Active Color PV Display General Model UM1 Digital Indicator with Alarms is a precision alarm instrument provided with universal

More information

General Specifications

General Specifications General Specifications MODEL UT50L Limit Controller GS 5DD-0E Overview The UT50L is an FM approved limit controller that can be configured either as a high limit or as a low limit controller by a user.

More information

General Specifications

General Specifications General Specifications Model UP350 Program Controller GS 05E0D00E General Model UP350 program controller is a precision controller, featuring two program profiles and universal input/output. For easy operation,

More information

General Specifications

General Specifications General Specifications GS 05D01D01E Model UT351 Digital Indicating Controller with Active Color PV Display General Model UT351 Digital Indicating Controller is a highly accurate 1/4 DIN controller, provided

More information

General Specifications

General Specifications General Specifications Model UT30 Digital Indicating Controller GS 05D0D00E General Model UT30 Digital Indicating Controller is a highly accurate /8 DIN controller, provided with universal input/ output.

More information

General Specifications

General Specifications General Specifications MODEL UT0 Digital Indicating Controller GS 0D01C00E General Model UT0 Digital Indicating Controller is an intelligent, microprocessor based digital indicating controller with powerful

More information

General Specifications

General Specifications General Specifications Model UT Digital Indicating Controller GS 0D01C0E General Model UT Digital Indicating Controller is an intelligent, microprocessor based digital indicating controller with powerful

More information

General Specifications

General Specifications General Specifications MODEL 550 Digital Indicating Controller GS 05D0C00E General Model 550 Digital Indicating Controller is an intelligent, microprocessor based digital indicating controller with powerful

More information

General Specifications

General Specifications General Specifications Model UT, UT Temperature Controller GS CE-E GENERAL UT series temperature controllers provide only the functions and size you require for your application. /6 DIN sizes is available.

More information

General Specifications

General Specifications General Specifications Model 0 Digital Indicating Controller GS 0D0C00E General Model 0 Digital Indicating Controller is an intelligent, microprocessor based digital indicating controller with powerful

More information

General Specifications

General Specifications General Specifications UM33A Digital Indicator with Alarms [Style: S9] Overview The UM33A digital indicator with Alarms employ an easy-to-read, 14-segment large color LCD display, along with navigation

More information

Models UT550/UT520 Digital Indicating Controllers User s Manual for Loop Control for Backup

Models UT550/UT520 Digital Indicating Controllers User s Manual for Loop Control for Backup Instruction Manual Models UT550/UT520 Digital Indicating Controllers User s Manual for Loop Control for Backup IM 05D01C02-45E IM 05D01C02-45E 1st Edition Blank Page Introduction Thank you

More information

Model UP350 Program Controller

Model UP350 Program Controller User s Manual Model UP350 Program Controller User s Manual IM 05E01D02-41E IM 05E01D02-41E 2nd Edition Blank Page Introduction i Thank you for purchasing the UP350 program controller. How to

More information

General Specifications

General Specifications General Specifications GS 05P01F31-01EN UT32A Digital Indicating Controller (Entry model) Functional Enhancement Overview The UT32A entry model digital indicating controller is an easily configurable single-loop

More information

Models UT550/UT520 Digital Indicating Controllers User s Manual for Single-loop Control

Models UT550/UT520 Digital Indicating Controllers User s Manual for Single-loop Control User s Manual Models UT550/UT520 Digital Indicating Controllers User s Manual for Single-loop Control IM 05D01C02-41E IM 05D01C02-41E 3rd Edition Blank Page Introduction i Thank you for purchasing

More information

Models UT350/UT320 Digital Indicating Controllers

Models UT350/UT320 Digital Indicating Controllers User s Manual Models UT350/UT320 Digital Indicating Controllers User s Manual IM 05D01D02-41E IM 05D01D02-41E 4th Edition Blank Page Introduction i Thank you for purchasing the UT350/UT320

More information

General Specifications

General Specifications General Specifications GS 05P03D21-01EN UM33A Digital Indicator with Alarms Functional Enhancement Overview The UM33A digital indicator with Alarms employ an easy-to-read, 14-segment large color LCD display,

More information

SHIMADEN DIGITAL INDICATORS

SHIMADEN DIGITAL INDICATORS Shimaden, Temperature and Humidity Control Specialists C %RH Series SD16A & SHIMADEN DIGITAL INDICATORS approved,ul applied BASIC FEATURES compliance DIN Size 48 x 96 mm ±.3% High Accuracy Indication Large

More information

Model UP750 Program Controller User s Manual for Dual-loop Control

Model UP750 Program Controller User s Manual for Dual-loop Control Instruction Manual Model UP750 Program Controller User s Manual for Dual-loop Control IM 05E0B0-5E IM 05E0B0-5E st Edition Blank Page Introduction i Thank you for purchasing the UP750 program

More information

Model UP351 Program Controller

Model UP351 Program Controller User s Manual Model UP351 Program Controller User s Manual IM 05E01D12-41E IM 05E01D12-41E 4th Edition Blank Page Introduction i Thank you for purchasing the UP351 program controller. How to

More information

General Specifications

General Specifications General Specifications GS 77J0A070E Model VJA7 Distributor (Multifunction) (Isolated Singleoutput and Isolated Dualoutput Types) Overview This plugin type distributor is used in combination with wire type

More information

General Specifications

General Specifications General Specifications GS 05D0B00E Model UT750 Digital Indicating Controller (with Custom Computation) General Model UT750 Digital Indicating Controller is an intelligent, microprocessor based digital

More information

General Specifications

General Specifications General Specifications GS 77J01Q08-01E Model VJQ8 Pulse to Analog Converter (Multi-function) (Isolated Single-output and Isolated Dual-output Types) General This plug-in type pulse to analog converter

More information

How to Install CAUTION. Panel. 150mm. 150mm. Direction to insert the controller Insert the controller into the opening at the front of the panel.

How to Install CAUTION. Panel. 150mm. 150mm. Direction to insert the controller Insert the controller into the opening at the front of the panel. User s IM DDE This manual describes installation, wiring, and other tasks required to make the ler ready for operation.. Safety Precautions. Model and Suffix Codes. How to Install. How to Connect Wires.

More information

Model UT551 Digital Indicating Controller with Active Color PV Display and Embedded Ethernet User s Manual for Single-loop Control

Model UT551 Digital Indicating Controller with Active Color PV Display and Embedded Ethernet User s Manual for Single-loop Control User s Manual Model UT551 Digital Indicating Controller with Active Color Display and Embedded Ethernet User s Manual for Single-loop Control IM 05D01C03-41E IM 05D01C03-41E 4th Edition Introduction

More information

General Specifications

General Specifications General Specifications GS J0U0-0E Model MU Universal Temperature Converter (Free Range Type) General The MU is a plug-in type universal temperature converter that converts input signal (thermocouple, RTD

More information

SHIMADEN DIGITAL INDICATORS

SHIMADEN DIGITAL INDICATORS Shimaden, Temperature and Humidity Control Specialists C %RH Series SD16 & SHIMADEN DIGITAL INDICATORS & NRTL /C approved BASIC FEATURES DIN Size 48 x 96 mm ±.3% High Accuracy Indication Large 2 mm bright

More information

General Specifications

General Specifications General Specifications Model UT350 Digital Indicating Controller GS 05D0D00E General Model UT350 Digital Indicating Controller is a highly accurate /DIN controller provided with universal input/ output.

More information

Model UP550 Program Controller User s Manual for Loop Control with PV Switching

Model UP550 Program Controller User s Manual for Loop Control with PV Switching User s Manual Model UP550 Program Controller User s Manual for Loop Control with Switching IM 05E0C0-46E IM 05E0C0-46E 3rd Edition Blank Page Introduction i Thank you for purchasing the UP550

More information

General Specifications

General Specifications General I/O Adaptors (for N-IO) GS 33J62F30-01EN [Release 6] GENERAL This General (GS) describes the hardware specifications of I/O adaptors that enable extended functions setting for analog digital I/O

More information

Model UT750 Digital Indicating Controller User s Manual for Cascade Control

Model UT750 Digital Indicating Controller User s Manual for Cascade Control User s Manual Model UT750 Digital Indicating Controller User s Manual for Cascade Control IM 05D01B02-44E IM 05D01B02-44E 3rd Edition Blank Page Introduction i Thank you for purchasing the

More information

MICRO-CONTROLLER X (48 48 mm)

MICRO-CONTROLLER X (48 48 mm) PX series digital temperature controller MICRO-CONTROLLER X ( mm) DATA SHEET PXG PXG is a compact size temperature controller of front panel size mm. To cope with any of versatile uses as a temperature

More information

General Specifications

General Specifications General Specifications Signal Conditioner Cards OUTLINE Signal Conditioner Cards, which interface to the process, are installed in Signal Conditioner Nests. [Release 6] The signal conditioner cards can

More information

SHIMADEN PROGRAM CONTROLLER

SHIMADEN PROGRAM CONTROLLER Shimaden, Temperature and Humidity Control Specialists C %RH SHIMADEN PROGRAM CONTROLLER approved BASIC FEATURES Full multi-input and multi-range performance User selectable Thermocouple, RTD, V, mv and

More information

Model UT750 Digital Indicating Controller User s Manual for Cascade Primary-loop Control

Model UT750 Digital Indicating Controller User s Manual for Cascade Primary-loop Control User s Manual Model UT750 Digital Indicating Controller User s Manual for Cascade Primary-loop Control IM 05D01B02-42E IM 05D01B02-42E 3rd Edition Blank Page Introduction i Thank you for purchasing

More information

Model UP550 Program Controller User s Manual for Cascade Primary-loop Control

Model UP550 Program Controller User s Manual for Cascade Primary-loop Control Instruction Manual Model UP550 Program Controller User s Manual for Cascade Primary-loop Control IM 05E0C02-42E IM 05E0C02-42E st Edition Blank Page Introduction i Thank you for purchasing

More information

SHIMADEN DIGITAL INDICATOR

SHIMADEN DIGITAL INDICATOR Shimaden, Temperature and Humidity Control Specialists C %RH Series SD24 & KR16A SHIMADEN DIGITAL INDICATOR BASIC FEATURES ohigh Accuracy ±0.1% FS+1 digit o1/1000ºc Resolution Indication Possible (Pt input

More information

MODEL: M6SXU MODEL: M6SXU [1][2] [3][4]

MODEL: M6SXU MODEL: M6SXU [1][2] [3][4] Tension-Clamp Ultra-Slim Signal Conditioners M6S Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Maintenance-free tension clamp connection Universal input (mv, V, ma, T/C, RTD and potentiometer)

More information

General Specifications

General Specifications General Specifications MODEL UP750 ler GS 5EB0-0E General Model UP750 ler is an intelligent, microprocessor based program controller that has the capacity of 00 program s, ful control capability, custom

More information

MODEL: M2XU MODEL: M2XU [1][2] [3][4]

MODEL: M2XU MODEL: M2XU [1][2] [3][4] Super-mini Signal Conditioners Mini-M Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Accepts direct inputs from various sensors and provides a standard process signal I/O types and

More information

General Specifications

General Specifications General Specifications Signal Conditioner Cards GS 33K50H80-50E OUTLINE Signal Conditioner Cards, which interface to the process, are installed in Signal Conditioner Nests. [Release 5] The signal conditioner

More information

DIGITAL PROGRAM CONTROLLER

DIGITAL PROGRAM CONTROLLER KP1000 SERIES DIGITAL PROGRAM CONTROLLER The KP1000 series is a 96x96mm digital program controller with the indicating accuracy of ±0.1%, the control cycle of approximately 0.1 seconds and maximum 19 program

More information

MICRO-CONTROLLER X (96 96 mm)

MICRO-CONTROLLER X (96 96 mm) PX series digital temperature controller MICRO-CONTROLLER X ( mm) DATA SHEET PXG PXG is a compact size temperature controller of front panel size mm. To cope with any of versatile uses as a temperature

More information

General Specifications

General Specifications General Specifications GS 05P08D81-01EN UT32A-D/MDL Digital Indicating Controller (Dual-loop, DIN Rail Mounting Type) Functional Enhancement Overview The UT32A-D/MDL controller is a dual-loop controller

More information

µr SERIES RECORDERS VIEW RECORDERS 4365 & 4375 Recorders FUNCTIONS FEATURES

µr SERIES RECORDERS VIEW RECORDERS 4365 & 4375 Recorders FUNCTIONS FEATURES 4365 & 4375 Recorders VIEW RECORDERS Splash and dust-proof door permits use even in poor environments. (Based on DIN 40050-IP54). Depth is a mere 220 mm, enabling significant instrument panel space savings.

More information

MODEL: R30US4. Remote I/O R30 Series

MODEL: R30US4. Remote I/O R30 Series Remote I/O R30 Series UNIVERSAL INPUT MODULE (4 points, isolated) Functions & Features 4 points universal input I/O module Isolation between the channels Input range of each channel is individually adjustable

More information

General Specifications

General Specifications General Specifications GS 04L53B01-01EN GX90XA/GX90XD GX90YD/GX90WD I/O Modules OVERVIEW I/O modules are connected to the GX/GP, Expandable I/O unit, GM main unit, and GM sub unit. A module type is four

More information

General Specifications

General Specifications General Specifications GS 05P08D3101EN UT32AD Digital Indicating Controller (Dualloop, Panel Mounting Type) Functional Enhancement Overview The UT32AD dualloop digital indicating controllers employ an

More information

General Specifications

General Specifications General Specifications GS 77J04H0-0E Model MH Isolator (Free Range Type) General The MH is a plug-in type isolator that converts DC current or DC voltage signals into isolated DC current or DC voltage

More information

MICRO-CONTROLLER X (48 96 mm)

MICRO-CONTROLLER X (48 96 mm) PX series digital temperature controller MICRO-CONTROLLER X ( mm) DATA SHEET PXG PXG is a compact size temperature controller of front panel size mm. To cope with any of versatile uses as a temperature

More information

DIGITAL THERMOMETER Digital Thermometer FEATURES INDEX RECORDERS

DIGITAL THERMOMETER Digital Thermometer FEATURES INDEX RECORDERS Digital Thermometer 23 88 350 mm 3 kg (8-5/8 3-/2 3-3/4" 6.6 lbs) The Digital Thermometer has 6 ranges of temperature sensors and measuring functions of DC V and Ω. YOKOGAWA-original A/D converter (feedback

More information

VIEW RECORDERS SPECIFICATIONS

VIEW RECORDERS SPECIFICATIONS SPECIFICATIONS Input points: µr1000:1,2,3,4,(pen),6(dot)point µr1800:1, 2, 3, 4, (pen), 6, 12, 18, and 24 (dot) point Input signals, range, and measurement range limits: Input RANGE Range 20 mv 20.00 to

More information

DIGITAL THERMOMETER VIEW RECORDERS Digital Thermometer FEATURES

DIGITAL THERMOMETER VIEW RECORDERS Digital Thermometer FEATURES Digital Thermometer High-Accuracy Reference Junction Compensation: Compensation accuracy (±0.2 C) Input terminals are provided on both front and rear panels, and an input site is switch selectable. The

More information

Temperature Controllers E5 J

Temperature Controllers E5 J Temperature Controllers Advanced PID Controller with Fuzzy Logic-Based Adaptive Tuning Provides Optimum Performance Available in 3 standard DIN sizes: Choose 1/4, 1/8 and 1/16 DIN Fuzzy adaptive tuning

More information

Process displays For standard signals, temperature, resistance measurement

Process displays For standard signals, temperature, resistance measurement Features Inputs: Voltage ±10 V, ±200 V / Current ±20 ma / thermocouples J,K,T,N,Pt100,Pt1000 / resistance measurement / potentiometer Display range can be linearised Two limits output Min, Max functions

More information

- SMART TUNE- PID CONTROL - UNIVERSAL, 3 WIRE- TC, RTD AND LINEAR INPUT - AUX- REMOTE SET POINT/ TRIM INPUT - 2x ISOLATED CONTROL AND RETRANSMISSION

- SMART TUNE- PID CONTROL - UNIVERSAL, 3 WIRE- TC, RTD AND LINEAR INPUT - AUX- REMOTE SET POINT/ TRIM INPUT - 2x ISOLATED CONTROL AND RETRANSMISSION ADVANCED - CONTROLLERS - SMART TUNE- PID CONTROL - UNIVERSAL, 3 WIRE- TC, RTD AND INPUT - AUX- REMOTE SET POINT/ TRIM INPUT - 2x ISOLATED CONTROL AND RETRANSMISSION (ma) OUTPUTS - 4x EVENT OR ALARM OUTPUTS

More information

6/12/24 Dot Printing Model Smart Recorder SRF206/212/224

6/12/24 Dot Printing Model Smart Recorder SRF206/212/224 No. CP-SS-E // Dot Printing Model Smart Recorder SRF0// The Smart Recorder SRF 0// Dot Printing Model accepts DC voltage, thermocouple, resistance temperature detector (RTD), communications and ON/OFF

More information

General Specifications

General Specifications General Specifications 35A/32A Digital Indicating Controllers [Style: S1] Overview The 35A/32A digital indicating controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation

More information

Digital Controller Intelligent, User-friendly Digital Controller and Programmer Controlled with ease with a support software which is input via the communication jack on the front panel. Minute adjustment

More information

DIGITAL INDICATING CONTROLLER

DIGITAL INDICATING CONTROLLER DB00 SERIES DIGITAL INDICATING CONTROLLER The DB00 series is a digital indicating controller with the indicating accuracy of ±0.% and the control cycle of approximately 0. seconds. Various functions including

More information

General Specifications

General Specifications General Specifications µrs800 Recorders GS0H0B0-00E µrs800 recorders are compact recorder with 80mm recording width, available as standard in,, 3, -pen, and 6,, 8, -point dot-printing models. These recorders

More information

ADAM 4000/4100 Series

ADAM 4000/4100 Series ADAM 4000/4100 Series Common Dimensions Communication RS-485 (2-wire) to host Speeds: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps (ADAM-4080, ADAM-4080D only support up to 38400 bps) Max. communication

More information

High Performance Process & Temperature Controllers

High Performance Process & Temperature Controllers C22 C62 C82 C83 High Performance Process & Temperature Controllers C72 C42 R22 01. Multi Color LCD Display 02. High Accuracy 18 Bit A-D Input and 15 Bit D-A Output 03. 200 msec Sampling Rate 04. True Universal

More information

Digital indicator for panel mounting With multi-function input Model DI25

Digital indicator for panel mounting With multi-function input Model DI25 Accessories Digital indicator for panel mounting With multi-function input Model DI25 WIKA data sheet AC 80.02 Applications Plant construction Machine tools Plastics technology and processing Ventilation

More information

General Specifications

General Specifications General Specifications µrs000 Recorders µrs000 recorders are compact recorder with 00mm recording width, available as standard in -pen, 2-pen, 3- pen, 4-pen, and 6-point dot-printing models. These recorders

More information

indicate that the contacts are available. How to Install CAUTION Panel

indicate that the contacts are available. How to Install CAUTION Panel s Manual IM DCE This manual describes installation, wiring, and other tasks required to make the controller ready f operation.. Safety Precautions. Model and Suffix Codes. How to Install How to Connect

More information

PROCESS & TEMPERATURE CONTROLLERS

PROCESS & TEMPERATURE CONTROLLERS PROCESS & TEMPERATURE CONTROLLERS NOVA PD54 Series Thermocouple, RTD, & Process Inputs High Accuracy Auto-Tuning PID Heating & Cooling Models Universal Power Supply 1-24 VAC Up to 3 Relays & 2 Analog Outputs

More information

MODEL: W2TS. Mini-MW Series

MODEL: W2TS. Mini-MW Series Space-saving Dual Output Signal Conditioners Mini-MW Series THERMOCOUPLE TRANSMITTER Functions & Features Accepts direct input from a thermocouple and provides a standard process signal 5-segment linearization

More information

MODEL: B3HU. Space-saving Two-wire Signal Conditioners B3-UNIT

MODEL: B3HU. Space-saving Two-wire Signal Conditioners B3-UNIT Space-saving Two-wire Signal Conditioners B3-UNIT 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER (HART communication, intrinsically safe) Functions & Features Universal input: mv, V, T/C, RTD, resistance, potentiometer

More information

SDC40A. DigitroniK TM Digital Indicating Controller RSW. Control unit PID (8) Auto tuning+ Neuro & Fuzzy RUN/READY R/L LSP.

SDC40A. DigitroniK TM Digital Indicating Controller RSW. Control unit PID (8) Auto tuning+ Neuro & Fuzzy RUN/READY R/L LSP. No. CP-SS-580E SDC40A DigitroniK TM Digital Indicating Controller Overview The DigitroniK TM SDC40A is a compact (96mm x 96mm) digital controller. The SDC40A features a wide variety of input options: thermocouples,

More information

General Specifications

General Specifications General Specifications SR Recorder LF 4D8B-4U The SR is a small compact recorder using a mm (4 inch) wide paper. The family consists of,,3 pen and a 6 dot model. Its input is universal, which means that

More information

CompoBus/D-type Digital Controller

CompoBus/D-type Digital Controller CompoBus/D-type Digital Controller Digital Controller for the CompoBus/D and Conforming the DeviceNet Conforms the DeviceNet and connects a Programmable Controller without any programming. High performance

More information

Excellent low-cost Process & Temperature Controllers

Excellent low-cost Process & Temperature Controllers C22 C62 C82 C83 Excellent low-cost Process & Temperature Controllers C72 C42 R22 01. High Quality LCD Display 02. High Accuracy 18 Bit A-D Input and 15 Bit D-A Output 03. The Fast Sampling Rate in 200

More information

Resistance Temperature Device Conversion Module

Resistance Temperature Device Conversion Module No.SS2-2330-0350 (Rev. 1) SystempaK (Digital/Single Case) Resistance Temperature Device Conversion Module Model J-SRP 90/95 Introduction The Resistance Temperature Device (RTD) Conversion Module (J-SRP)

More information

High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals

High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals Accessories High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals WIKA data sheet AC 80.03 Applications Machine building

More information

General Specifications

General Specifications General Specifications GS J0X-0E Model MXT Universal Computing Unit (-input, Isolated -output Type) General This plug-in type universal computing unit receives DC current or DC voltage signals, applies

More information

DC1010/DC1020/DC1030/DC1040

DC1010/DC1020/DC1030/DC1040 05/0 0-10-10-0-EN Page 1 of DC1010/DC1020/DC100/DC1040 DIGITAL CONTROLLERS Specification Overview The DC1000 Series are microprocessorbased controllers designed with a high degree of functionality and

More information

SHIMADEN DIGITAL CONTROLLER

SHIMADEN DIGITAL CONTROLLER Shimaden, Temperature and Humidity Control Specialists C %RH Series SR9 SHIMADEN DIGITAL CONTROLLER ASIC FEATURES Multi-input and multi-range performance Large mm bright display (SR9) Readable from a distance

More information

MODEL: TC10EM. Temperature Controller TC10 Series

MODEL: TC10EM. Temperature Controller TC10 Series Temperature Controller TC0 Series TEMPERTURE CONTROLLER (Modbus, 5 digit, LED display type, size 9 x 9 mm) Functions & Features Two PID controllers* Universal input x points, control output x points, discrete

More information

General Specifications

General Specifications General Specifications MW100-E-1X/X/X/S15 Special Edition 1. MW100/S15 Hardware Specification MW100 Logging type Mainly standalone measurement and distributed remote measurement Style No. S3 Maximum number

More information

Hawk 3 Digital Panel Meter / Controller

Hawk 3 Digital Panel Meter / Controller File # E199939 All parameters set from easy to understand front panel access One, two or four 5-amp relays optional Five user-selectable brightness levels 1/8 DIN, shallow depth case, 3.24 RS485 digital

More information

Fuzzy Temperature Controllers E5AF

Fuzzy Temperature Controllers E5AF Fuzzy Temperature Controllers 1/4 DIN Controller Combines Fuzzy and PID Control For Fast Response to Process Disturbances Advanced PID control provides optimal response during start-up and steadystate

More information

SR25. SHIMADEN DIGITAL CONTROLLER Shimaden, Temperature and Humidity Control Specialists MICROPROCESSOR-BASED AUOT-TUNING PID CONTROLLER

SR25. SHIMADEN DIGITAL CONTROLLER Shimaden, Temperature and Humidity Control Specialists MICROPROCESSOR-BASED AUOT-TUNING PID CONTROLLER SHIMADEN DIGITAL CONTROLLER Shimaden, Temperature and Humidity Control Specialists SERIES SR25 MICROPROCESSOR-BASED AUOT-TUNING PID CONTROLLER High Accuracy ±0.1% High Sampling Cycle 0.1 sec. Auto-Tuning

More information

DigitroniK TM Digital Indicating Controller SDC20

DigitroniK TM Digital Indicating Controller SDC20 No. CP SS 47E DigitroniK TM Digital Indicating Controller SDC The DigitroniK SDC is a compact digital controller with multi-range and PID autotuning systems for various inputs, with time proportional (on/off)

More information

General Specifications

General Specifications General Specifications GX90XA/GX90XD/GX90YD/ GX90WD/GX90XP/GX90YA I/O Modules GS 04L53B01-01EN OVERVIEW I/O modules are connected to the GX/GP, Expandable I/O unit, GM main unit, and GM sub unit. A module

More information

PROGRAMMABLE CONTROLLER

PROGRAMMABLE CONTROLLER SERIES FP21 High Accuracy ±0.1% Programmable 9 Patterns and 9 Steps (81 Steps Max.) Auto-Tuning PID RA / DA Selectable User-Selectable Inputs (Thermocouple) User-Selectable Ranges Programmable Scaling

More information

MODEL: M3LU2. OUTPUT Field-selectable Current 0 20 ma DC Voltage V DC V DC

MODEL: M3LU2. OUTPUT Field-selectable Current 0 20 ma DC Voltage V DC V DC MODEL: MLU Space-saving Signal Conditioners M-UNIT Series UNIVERSL TRNSMITTER (field- and PC-configurable) Functions & Features Universal input: mv, V, m, T/C,, resistance and potentiometer Easy One-Step

More information

HYBRID RECORDER OUTLINE

HYBRID RECORDER OUTLINE Specifications Sheet No.SPEC-33E (st Edition) RM0C HYRID RECORDER OUTLINE RM0C is 00mm calibrated hybrid recorder in a 44x44 DIN front panel and short depth of 50mm case housing. The recorder has versatility

More information

PROGRAMMABLE CONTROLLER

PROGRAMMABLE CONTROLLER Shimaden, Temperature and Humidity Control Specialists C %RH Series FP2 PROGRAMMABLE CONTROLLER approved UL applied BASIC FEATURES 2-channel controller (Basic type: 1-channel controller) Independent 2-loop

More information

Single Loop Controller SDC35/36

Single Loop Controller SDC35/36 No. CP SS 180E Single Loop Controller SDC35/36 Features The DigitroniK SDC35/36 is a digital indicating controller featuring multi-range inputs and PID control system using new algorithms "RationaLOOP"

More information

SPECIFICATIONS Digital Indicator 1. General

SPECIFICATIONS Digital Indicator 1. General SPECIFICATIS Digital Indicator 1. General The instrument is a digital indicator for the purpose of instrumentation, and suitable for the application in hopper, tank scale, and so on. 2. Specifications

More information

C1901 Single Pen Circular Chart Recorder. C1901 a rugged, reliable recorder for all single channel recording applications

C1901 Single Pen Circular Chart Recorder. C1901 a rugged, reliable recorder for all single channel recording applications Data sheet DS/ EN Rev. F a rugged, reliable recorder for all single channel recording applications Universal process input ma, mv, V, thermocouples and resistance Signal linearization full range of linearizers

More information

DC1010/DC1020/DC1030/DC1040/Compact type DIGITAL CONTROLLERS Specification

DC1010/DC1020/DC1030/DC1040/Compact type DIGITAL CONTROLLERS Specification 01 May 20 30-10-10--EN Page 1 of DC1010/DC1020/DC1030/DC1040/Compact type DIGITAL CONTROLLERS Specification Overview The DC1000 Series are microprocessorbased controllers designed with a high degree of

More information

UT750. Relay. 150mm. UT s contact. Relay (Use one with a relay coil rating less than the UT s contact rating.) 150mm. Recommended Terminal Lugs

UT750. Relay. 150mm. UT s contact. Relay (Use one with a relay coil rating less than the UT s contact rating.) 150mm. Recommended Terminal Lugs User s Manual IM 5DBE This manual describes installation, wiring, and other tasks required to make the controller ready f operation.. Safety Precautions. Model and Suffix Codes. How to Install. How to

More information

MODEL: M2EXT. Super-mini Signal Conditioners with Display Mini-M M2E Series

MODEL: M2EXT. Super-mini Signal Conditioners with Display Mini-M M2E Series Super-mini Signal Conditioners with Display Mini-M ME Series THERMOCOUPLE TRANSMITTER (PC programmable) Functions & Features Accepts direct input from a thermocouple and provides a linearized process signal

More information

DCP552B Mark II. DIGITRONIK TM Programmable Controller. Control operation block. Mode transition. PID control Auto-tuning.

DCP552B Mark II. DIGITRONIK TM Programmable Controller. Control operation block. Mode transition. PID control Auto-tuning. No. CP-SS-1853E DCP552B Mark II DIGITRONIK TM Programmable Controller Overview The DIGITRONIK TM DCP552B Mark II is a high-function programmable controller supporting two channels (up to 49 program patterns

More information