WinField Release 2018 optimized for Windows 10
|
|
- Fay Olivia Strickland
- 5 years ago
- Views:
Transcription
1 WinField Release 2018 optimized for Windows 10 The new features at a glance: New DC Corona Noise Spectrum according to DIN Spec 8987 Input of antenna power either as P-, ERP- or EIRP-value New bandpass filter for variable HF-calculations implemented Export of calculation data as *.agr ArcInfo Grid-ASCII Multi-Import of several *.dxf building files New block libraries for switch gears, trains, ships and high-rise buildings Block libraries for streets, fences etc. are now adapting to the ground profile New libraries for single- and double-track railway lines with poles DXF-import of circular arcs for cables for detailed simulation Up to double calculation velocity for B-, E-Field and Audible Noise Virtual Reality Interface: The block libraries were extended by elements such as trains, ships, office buildings and high-rise buildings. Some of the street and fence elements were designed in an adaptive form so that they adjust to the surrounding terrain.
2 New Calculation Functions: The calculation velocity for B-, E-field and Audible Noise was nearly doubled for large projects. The main reason for that is an improvment of the dynamic interpolation. In combination with the use of distance limit, which produces sharp edges on the limit-borders, the dynamic interpolation was speeded up in these sectors. Furthermore, when there are several transmission lines in one project, the space in between the lines is skipped by the dynamic interpolation. For large projects, the calculation of the electric field was accelerated by reducing the number of segments outside of the currently zoomed area of the calculation field to seg=1. Therefore the potential-coefficient-matrix is reduced significantly which results in an improved performance. The option Distance Limit was removed for the HF-mode because due to very different power levels of HF-sources this option couldn t be used in an appropriate form, anyway. As an alternative one can use the option Limit for transmitter in the dialog Shielding and Reflection Settings. Instead of the antenna power, ERP or EIRP-values can now be used. Those values are conected with the gain and are converted into each other. A new dialog was implemented which allows to set a bandpass filter for calculations in the HF-mode. Fig.: Bandpass filter dialog for the HF-mode A DC-spectrum is now incorporated as an additional spectrum for Audible Noise calculation. When DC or mixed AC/DCgeometries are used, every object is allocated the right spectrum during QSI-data-export.
3 Fig.: Settings for Audible Noise calculation with loaded DC-spectrum
4 Cartographic Data You can also insert GPS-coordinates in the coordinate list, if you name the list *.GPS instead of *.kor. If you open the list in WinField, it is converted automatically to UTM-coordinates Fig.: Coordinate list in UTM-coordinates which were generated by importing GPS-coordinates Extension of block libraries: Also this year, the block libraries were extended by switch gears, especially from the manuacturers ABB, Schneider, Selmoni, Ormazabal. In the railway library new sections for single- and doubletrack railway lines which include the corresponding poles, contact wires and supporting rope were added. Improved User Interface: During the import of projects in *.xls format, the ground wire references are corrected automatically if they were not setted correctly by the exporting software so that WinField can always provide a proper and usable geometry. Only real buildings are exported during the QSI-export. Cases which are used as GIS-tubes are not taken into account. When points are selected during a field calculation in order to display the field strengthes on their position the values are highlighted with a grey textfield for better legibility. The number of decimal places corresponds to the number of decimal places set for the geometry window. New Construction Functions
5 It is now possible to import buildings from more than one *.dxf-file at the same time. The dialog Edit Elements now has hotkeys so that it can be used even faster. Fig.: Edit Elements dialog with hotkeys General Improments: The checkbox dbi from beamwidth for HFsources was revised so that it stays activated during changes of patterns and after closing and re-opening the dialog. The colored labels in the data windows and the diagrams in the statistic window have new colors which are less glaring and better legible. You can now export calculation data as an *.agrfile. This is possible for both horizontal and vertical calculation planes. For evaluation whether an only 2D calculation is sufficient or a 3D-calculation is necessary - for cases like crossing of transmission lines - for an Audible Noise calculation or a QSI export, a catalouge of examples is availablle in the directory \Example\QS\catalog_2Dvs3D The hardlock drivers are up to date. Data Import: Fig.: Diagram in x-axis-window with new color setting When geometries are imported from *.dxf-files which were created in AutoCAD, etc. circular arcs can now be loaded into WinField. These arcs can especially appear in cable systems and lead to a significantly improved modelling.
Pulse Doppler Flow-Dop
EDUCATION Pulse Doppler Flow-Dop GAMPT-50100 User Manual Fon: +49 (0) 3461-278 691-0 Fax: +49 (0) 3461-278 691-101 email: info@gampt.de Gesellschaft für Angewandte Medizinische Physik und Technik mbh (GAMPT
More informationHydraulics and Floodplain Modeling Managing HEC-RAS Cross Sections
v. 9.1 WMS 9.1 Tutorial Hydraulics and Floodplain Modeling Managing HEC-RAS Cross Sections Modify cross sections in an HEC-RAS model to use surveyed cross section data Objectives Build a basic HEC-RAS
More informationHydraulics and Floodplain Modeling Managing HEC-RAS Cross Sections
WMS 10.1 Tutorial Hydraulics and Floodplain Modeling Managing HEC-RAS Cross Sections Modify cross sections in an HEC-RAS model to use surveyed cross section data v. 10.1 Objectives Build a basic HEC-RAS
More informationATHENA2012. The new upgrade raises the bar on productivity. An even better return on investment
ATHENA2012 The new upgrade raises the bar on productivity An even better return on investment The new version of ATHENA 2012 certainly meets that claim. The 3D Modeling Program has increased functionality
More informationAntenna Measurement Software Features and Specifications
Antenna Measurement Software Antenna emission measurement and characterization http://www.diamondeng.net 484 Main Street, Suite 16 Diamond Springs, CA 95619 (530) 626-3857 Software Features Test Equipment
More informationFundamentals of Antennas. Prof. Ely Levine
Fundamentals of Antennas Prof. Ely Levine levineel@zahav.net.il 1 Chapter 3 Wire Antennas 2 Types of Antennas 3 Isotropic Antenna Isotropic radiator is the simplest antenna mathematically Radiates all
More informationAutoCAD Civil 3D 2009 ESSENTIALS
AutoCAD Civil 3D 2009 ESSENTIALS SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. Alignments and Profiles Section 2: Profiles In this section you learn how
More informationSuveying Lectures for CE 498
Suveying Lectures for CE 498 SURVEYING CLASSIFICATIONS Surveying work can be classified as follows: 1- Preliminary Surveying In this surveying the detailed data are collected by determining its locations
More informationSicat Master. Engineering of overhead contact line systems. siemens.com/rail-electrification
Sicat Master Engineering of overhead contact line systems siemens.com/rail-electrification When engineering overhead contact lines for mass transit and main line railways, we combine the calculations of
More informationUser s Manual ❿ Drawings-Detailing
User s Manual ❿ Drawings-Detailing 2 CONTENTS I. THE NEW UPGRADED INTERFACE of SCADA Pro 4 1. UNITS 5 1.1 Drawings-Detailing 5 I. Files 6 II. Drawing 25 III. Formworks 30 IV. Edit 45 V. View 58 VI. Layers
More informationIDEA Corbel 8. User guide. IDEA Corbel User Guide
IDEA Corbel User Guide IDEA Corbel 8 User guide IDEA Corbel User Guide Content 1.1 Program requirements... 3 1.2 Installation guidelines... 3 2 Basic Terms... 4 3 User interface... 5 3.1 Control of view
More informationEPCWIN THE HIGH-END SOFTWARE
EPCWIN THE HIGH-END SOFTWARE ZSK Stickmaschinen GmbH Magdeburger Str. 38-40 D-47800 Krefeld Tel: +49 (0) 2151 44 40 Fax: +49 (0) 2151 44 41 70 atelier@zsk.de www.zsk.com News 4.0 Version 4.0 (03/2009)
More informationRevit Structure 2014 Basics
Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationNetwork Design Considerations and Deployment Concerns for a Ground Aircraft Communication System
Network Design Considerations and Deployment Concerns for a Ground Aircraft Communication System CelPlan Technologies Leonhard Korowajczuk CEO/CTO Leonhard @celplan.com 703-259-4022 www.celplan.com 9/10/2013
More informationTAP 6 Demo Quick Tour
TAP 6 Demo Quick Tour Sales Contact: Curt Alway P.O. Box 7205 Charlottesville, VA 22906 Voice: 303-344-5486, Ext 1 Fax: 303-265-9399 Email: sales@softwright.com Technical Contact: Todd Summers, Ph.D. P.O.
More informationMicroLab 500-series Getting Started
MicroLab 500-series Getting Started 2 Contents CHAPTER 1: Getting Started Connecting the Hardware....6 Installing the USB driver......6 Installing the Software.....8 Starting a new Experiment...8 CHAPTER
More informationBasic 2D drawing skills in AutoCAD 2017
Basic 2D drawing skills in AutoCAD 2017 This Tutorial is going to teach you the basic functions of AutoCAD and make you more efficient with the program. Follow all the steps so you can learn all the skills.
More informationATHENA2014. Drawing, planning, designing be even more productive with the new upgrade! Really fast! Really good!
ATHENA2014 Drawing, planning, designing be even more productive with the new upgrade! Really fast! Really good! With the development of the ATHENA 2014 Upgrade the emphasis this time is on increasing productivity.
More informationLesson 6 2D Sketch Panel Tools
Lesson 6 2D Sketch Panel Tools Inventor s Sketch Tool Bar contains tools for creating the basic geometry to create features and parts. On the surface, the Geometry tools look fairly standard: line, circle,
More informationHalf-Wave Dipole. Radiation Resistance. Antenna Efficiency
Antennas Simple Antennas Isotropic radiator is the simplest antenna mathematically Radiates all the power supplied to it, equally in all directions Theoretical only, can t be built Useful as a reference:
More information...COPRA RF & COPRA FEA RF State-of-the-Art in Design and Simulation
COPRA RF 2015 Service Release 2 Release Notes...COPRA RF & COPRA FEA RF State-of-the-Art in Design and Simulation Revision Control Profile Features Automatic Roll Adjustment Automatic Station Sequences
More informationRevit Structure 2012 Basics:
SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural
More informationNJDEP GPS Data Collection Standards for GIS Data Development
NJDEP GPS Data Collection Standards for GIS Data Development Bureau of Geographic Information Systems Office of Information Resource Management April 24 th, 2017 Table of Contents 1.0 Introduction... 3
More informationChapter 6 Title Blocks
Chapter 6 Title Blocks In previous exercises, every drawing started by creating a number of layers. This is time consuming and unnecessary. In this exercise, we will start a drawing by defining layers
More informationImport/Export of tendons in module StatiCa Tendon
IDEA Tutorial Import/Export of tendons in module StatiCa Tendon by using formats DXF, TXT and table format Import/Export of tendons in module StatiCa Tendon 1 Contents 1. Terminology... 2 2. Import...
More informationAdvance Steel suite 6.1 / SP2
Advance Steel suite 6.1 / SP2 This document describes only the improvements in Service Pack 2 compared to Service Pack 1. The installation of SP2 includes SP1; please see the previous document for improvements
More informationMODEC GIS Microstation
MODEC Microstation Sheet wise Sliver, Gap (Pseudo-Node) (Self Intersection) (Island) Duplication Seamless Database ) Code Page Working Units : WGS84 UTM Working Units Working Units GO=500000, 3000000
More informationRelease Highlights for BluePrint-PCB Product Version 2.0.1
Release Highlights for BluePrint-PCB Product Version 2.0.1 Introduction BluePrint Version 2.0.1 is a rolling release for BluePrint V2.0. BluePrint rolling releases are delivered as needed and allow us
More informationRevit Structure 2013 Basics
Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial
More informationPrinciples and Applications of Microfluidic Devices AutoCAD Design Lab - COMSOL import ready
Principles and Applications of Microfluidic Devices AutoCAD Design Lab - COMSOL import ready Part I. Introduction AutoCAD is a computer drawing package that can allow you to define physical structures
More informationPRODIM CT 3.0 MANUAL the complete solution
PRODIM CT 3.0 MANUAL the complete solution We measure it all! General information Copyright All rights reserved. Apart from the legally laid down exceptions, no part of this publication may be reproduced,
More informationTBARC Programs Antenna Modeling with 4NEC2. By Randy Rogers AD7ZU 2010
TBARC Programs Antenna Modeling with 4NEC2 By Randy Rogers AD7ZU 2010 Getting Started 4NEC2 is a completely free windows based tool suite to aid in the design and optimization of antenna systems 4NEC2
More informationInserting and Creating ImagesChapter1:
Inserting and Creating ImagesChapter1: Chapter 1 In this chapter, you learn to work with raster images, including inserting and managing existing images and creating new ones. By scanning paper drawings
More informationDepartment of Civil and Environmental Engineering
Department of Civil and Environmental Engineering CEE213L Surveying & Introduction to GIS Lab SURVEYING LABORATORY NORTH SOUTH UNIVERSITY Center of Excellence in Higher Education The First Private University
More informationContour Module for MountainsMap
All the essential tools for geometric dimensioning & tolerancing of profiles Calculate dimensions of profiles using interactive tools Define & display pass/fail criteria with tolerances for any dimension
More informationThe Reverse Polarity TNC(m) RF connector can be easily secured or removed from equipment in the field by a single gloved hand, no tools required.
Overview Southwest Antennas is a half wave dipole omni antenna with a frequency range of 1.35 to 1.40 GHz and 2.15 dbi of peak gain. This product features an integrated RF bandpass filter to help eliminate
More informationFoamWorks Introduction. David Mrozinski 848 W. Borton Road Essexville, Michigan 48732
FoamWorks 4.0 Introduction Quick Start Registration Registration Menus Files Save a Cut Profile Load a Cut Profile Close Profile/G-code Restore Default Cut Profile Exit Setup Setup Parameters Generate
More informationGEO/EVS 425/525 Unit 9 Aerial Photograph and Satellite Image Rectification
GEO/EVS 425/525 Unit 9 Aerial Photograph and Satellite Image Rectification You have seen satellite imagery earlier in this course, and you have been looking at aerial photography for several years. You
More informationOrnamental Pro 2004 Instruction Manual (Drawing Basics)
Ornamental Pro 2004 Instruction Manual (Drawing Basics) http://www.ornametalpro.com/support/techsupport.htm Introduction Ornamental Pro has hundreds of functions that you can use to create your drawings.
More information4GHz / 6GHz Radiation Measurement System
4GHz / 6GHz Radiation Measurement System The MegiQ Radiation Measurement System (RMS) is a compact test system that performs 3-axis radiation pattern measurement in non-anechoic spaces. With a frequency
More informationBANTAM INSTRUMENTS SOFTWARE USER S MANUAL MIL-STD-461E PRE-COMPLIANCE MEASUREMENT SYSTEM MODEL EMC-461. Model EMC-461 Software User s Manual
BANTAM INSTRUMENTS MIL-STD-461E PRE-COMPLIANCE MEASUREMENT SYSTEM MODEL EMC-461 SOFTWARE USER S MANUAL MIL-STD-461E PRE-COMPLIANCE MEASUREMENT SYSTEM MODEL EMC-461 Software User s Manual BANTAM INSTRUMENTS
More informationUsing Dynamic Views. Module Overview. Module Prerequisites. Module Objectives
Using Dynamic Views Module Overview The term dynamic views refers to a method of composing drawings that is a new approach to managing projects. Dynamic views can help you to: automate sheet creation;
More informationRECOMMENDATION ITU-R S *
Rec. ITU-R S.1339-1 1 RECOMMENDATION ITU-R S.1339-1* Rec. ITU-R S.1339-1 SHARING BETWEEN SPACEBORNE PASSIVE SENSORS OF THE EARTH EXPLORATION-SATELLITE SERVICE AND INTER-SATELLITE LINKS OF GEOSTATIONARY-SATELLITE
More informationLesson 10. Unit 2. Reading Maps. Graphing Points on the Coordinate Plane
Lesson Graphing Points on the Coordinate Plane Reading Maps In the middle ages a system was developed to find the location of specific places on the Earth s surface. The system is a grid that covers the
More informationThis instruction manual contains all necessary information required to assist in the correct installation of ARGUS Stadium Panel Antennas.
Revision C, August 2016 Instruction Manual, Stadium Panel Antennas General This instruction manual contains all necessary information required to assist in the correct installation of ARGUS Stadium Panel
More informationDevelopment of a noval Switched Beam Antenna for Communications
Master Thesis Presentation Development of a noval Switched Beam Antenna for Communications By Ashraf Abuelhaija Supervised by Prof. Dr.-Ing. Klaus Solbach Institute of Microwave and RF Technology Department
More informationverticals products support services training community corporate Saving DGN to DWG (with AutoCAD paperspace and viewport compatibility)
Page 1 of 6 Login Site Map Print Store Search Select Locale Quick Links verticals products support services training community corporate Support Support Tools KnowledgeBase TechNotes and FAQs Remote Support
More informationPropagation mechanisms
RADIO SYSTEMS ETIN15 Lecture no: 2 Propagation mechanisms Ove Edfors, Department of Electrical and Information Technology Ove.Edfors@eit.lth.se Contents Short on db calculations Basics about antennas Propagation
More informationGround Plane Test in the Softball Field
Ground Plane Test in the Softball Field Raul Monsalve SESE, Arizona State University August 22, 213 2 Description At the end of the antenna measurement performed in a softball field between August 13 and
More information87.5 TO MHz BAND II 2 WAY 4.8dBi STACKED DIPOLE ANTENNA
87.5 TO 108.0 MHz BAND II 2 WAY 4.8dBi STACKED DIPOLE ANTENNA 1. INTRODUCTION 3 1.1. GENERAL INFORMATION 3 1.2. UNPACKING AND CHECKING 3 1.3. WARRANTY 3 1.4. USER SAFETY RESPONSIBILITY 4 1.5. INSTALLATION
More informationConstructDXF DXF Drawing Requirements User Guide <Virtual Environment> 6.0
ConstructDXF DXF Drawing Requirements User Guide 6.0 Page 1 of 8 Contents 1 Introduction... 3 1.1 Purpose of this Guide... 3 1.2 What is ConstructDXF?... 3 2 Preparation of the DXF
More informationAdvance Concrete. Tutorial
Advance Concrete Tutorial Table of contents About this tutorial... 9 How to use this guide... 10 Lesson 1: Creating a building grid... 11 Step 1: Create a default building grid... 11 Step 2: Set the distances
More informationRECOMMENDATION ITU-R BS.80-3 * Transmitting antennas in HF broadcasting
Rec. ITU-R BS.80-3 1 RECOMMENDATION ITU-R BS.80-3 * Transmitting antennas in HF broadcasting (1951-1978-1986-1990) The ITU Radiocommunication Assembly, considering a) that a directional transmitting antenna
More informationEngineering Innovation Center Fabrication Shop Basic CAD Training
Engineering Innovation Center Fabrication Shop Basic CAD Training Introduction The Engineering Innovation Center Fabrication Shop was established for support of undergraduate student course work. Every
More informationTHE BEST GPR DATA QUALITY AT THE BEST PRICE! GROUND PENETRATING RADAR ZOND-12e G R O U N D P E N E T R A T I N G R A D A R S
GROUND PENETRATING RADAR ZOND-12e General Purpose Pulse GPR ZOND-12e SINGLE CHANNEL OR ADVANCED CONTROL UNITS ZOND 12e GPR is a portable digital Ground Penetrating Radar carried by a single operator. The
More informationDesign and Matching of a 60-GHz Printed Antenna
Application Example Design and Matching of a 60-GHz Printed Antenna Using NI AWR Software and AWR Connected for Optenni Figure 1: Patch antenna performance. Impedance matching of high-frequency components
More informationRec. ITU-R F RECOMMENDATION ITU-R F *
Rec. ITU-R F.162-3 1 RECOMMENDATION ITU-R F.162-3 * Rec. ITU-R F.162-3 USE OF DIRECTIONAL TRANSMITTING ANTENNAS IN THE FIXED SERVICE OPERATING IN BANDS BELOW ABOUT 30 MHz (Question 150/9) (1953-1956-1966-1970-1992)
More informationExisting and Design Profiles
NOTES Module 09 Existing and Design Profiles In this module, you learn how to work with profiles in AutoCAD Civil 3D. You create and modify profiles and profile views, edit profile geometry, and use styles
More informationIn this tutorial you will open a Dxf file and create the toolpath that cut the external of the part.
Tutorial 2 - Open Dxf file and create the outside Contour toolpath. In this tutorial you will open a Dxf file and create the toolpath that cut the external of the part. Caution: CNC machines are potentially
More informationSupporting Network Planning Tools II
Session 5.8 Supporting Network Planning Tools II Roland Götz LS telcom AG / Spectrocan 1 Modern Radio Network Planning Tools Radio Network Planning Tool Data / Result Output Data Management Network Processor
More informationCHAPTER 7 Total Station Surveying. CE 316 March 2012
CHAPTER 7 Total Station Surveying CE 316 March 2012 249 7.1 Introduction Total station surveying - defined as the use of electronic survey equipment used to perform horizontal and vertical measurements
More informationThe better WLAN Radio Network by an optimal Antenna System
The better WLAN Radio Network by an optimal Antenna System BU Antennas ASY H&S Antennen mme / Pfad...ppt 1 www.hubersuhner.com www.hubersuhner.com The better radio network by optimal antennas What is an
More informationFull Contents. Essentials, Workbook
Section 1: Overview Essentials 1.1 Introduction... 3 Learning InRoads... 3 Basic Rules... 3 How to Use This Guide... 4 Section Breakdown... 5 Section 1: Overview Essentials... 5 Section 2: Production Essentials...
More informationWhat s New in ADMS 5.2?
What s New in ADMS 5.2? ADMS 5.2 is the latest general release of CERC s state of the art model for the dispersion of pollutants. ADMS 5.2 contains a number of new features and model options, most notably:
More informationKongsberg Seatex AS Pirsenteret N-7462 Trondheim Norway POSITION 303 VELOCITY 900 HEADING 910 ATTITUDE 413 HEAVE 888
WinFrog Device Group: Device Name/Model: Device Manufacturer: Device Data String(s) Output to WinFrog: WinFrog Data String(s) Output to Device: WinFrog Data Item(s) and their RAW record: GPS SEAPATH Kongsberg
More informationstacking broadside collinear
stacking broadside collinear There are three primary types of arrays, collinear, broadside, and endfire. Collinear is pronounced co-linear, and we may think it is spelled colinear, but the correct spelling
More informationUsing Siemens NX 11 Software. The connecting rod
Using Siemens NX 11 Software The connecting rod Based on a Catia tutorial written by Loïc Stefanski. At the end of this manual, you should obtain the following part: 1 Introduction. Start NX 11 and open
More informationIDEA CSS 7 General cross-section
IDEA CSS User Guide IDEA CSS 7 General cross-section User guide IDEA CSS User Guide Content 1.1 Program requirements... 3 1.2 Installation guidelines... 3 2 Basic Terms... 4 3 User interface... 5 3.1 Control
More informationIDEA Connection 8. User guide. IDEA Connection user guide
IDEA Connection user guide IDEA Connection 8 User guide IDEA Connection user guide Content 1.1 Program requirements... 5 1.2 Installation guidelines... 5 2 User interface... 6 2.1 3D view in the main window...
More informationSharing Considerations Between Small Cells and Geostationary Satellite Networks in the Fixed-Satellite Service in the GHz Frequency Band
Sharing Considerations Between Small Cells and Geostationary Satellite Networks in the Fixed-Satellite Service in the 3.4-4.2 GHz Frequency Band Executive Summary The Satellite Industry Association ( SIA
More information4.4 Slope and Graphs of Linear Equations. Copyright Cengage Learning. All rights reserved.
4.4 Slope and Graphs of Linear Equations Copyright Cengage Learning. All rights reserved. 1 What You Will Learn Determine the slope of a line through two points Write linear equations in slope-intercept
More informationWhat s new in IGEMS R9
General changes and CAD-commands What s new in IGEMS R9 Page 1 General changes and CAD-commands What s new in IGEMS R9 This document is not a complete manual. It describes only the differences between
More informationDowntilt: How to set it
: How to set it 2017 KP Performance Antennas, Inc. All Rights Reserved. Page 1 As operators expand their fixed-wireless networks from a single to multiple base stations, mitigating interference between
More informationAlibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1
Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1 Part Tutorial Exercise 5: Loft-Tube-1 [Complete] In this Exercise, We will set System Parameters first, then part options. Then, in sketch
More informationCreating Nice 2D-Diagrams
UseCase.0046 Creating Nice 2D-Diagrams Keywords: 2D view, z=f(x,y), axis, axes, bitmap, mesh, contour, plot, font size, color lookup table, presentation Description This use case demonstrates how to configure
More informationRECOMMENDATION ITU-R S.1341*
Rec. ITU-R S.1341 1 RECOMMENDATION ITU-R S.1341* SHARING BETWEEN FEEDER LINKS FOR THE MOBILE-SATELLITE SERVICE AND THE AERONAUTICAL RADIONAVIGATION SERVICE IN THE SPACE-TO-EARTH DIRECTION IN THE BAND 15.4-15.7
More informationModule 1H: Creating an Ellipse-Based Cylindrical Sheet-metal Lateral Piece
Inventor (10) Module 1H: 1H- 1 Module 1H: Creating an Ellipse-Based Cylindrical Sheet-metal Lateral Piece In this Module, we will learn how to create an ellipse-based cylindrical sheetmetal lateral piece
More informationMick Hodgson. Tekla Structures, Tekla Versions And Software Evolution
Mick Hodgson 2018 Tekla Structures, Tekla Versions And Software Evolution Tekla Version 15 Main Points Unlimited Models Quick modelling tools Fast drawing production Tube CNC Tekla Version 15 Main Points
More informationVectaStar 3500 METHODS FOR SUCCESSFUL ANTENNA DEPLOYMENT
VectaStar 3500 METHODS FOR SUCCESSFUL ANTENNA DEPLOYMENT Cambridge Broadband Limited D000114 Issue A01 Mark Jackson 1 INTRODUCTION 3 1.1 The purpose of antennas 3 2 ANTENNA CHARACTERISTICS 4 2.1 Antenna
More informationDeltaCad and Your Horizontal Altitude Sundial Carl Sabanski
1 The Sundial Primer created by In the instruction set SONNE and Your Horizontal Altitude Sundial we went through the process of designing a horizontal altitude sundial with SONNE and saving it as a dxf
More informationdesign the future Reference Manual PO Box Tigard, OR
TM design the future Reference Manual PO Box 230755 Tigard, OR 97281 0755 Contents 3 Table of Contents... 7 Need Help?... 7 Linked Text... 7 Menu Index File... 8 New... 9 Open... 9... 10 Save... 10 Save
More informationSebastian Büttrich, wire.less.dk edit: September 2009, Pokhara, Nepal. Shortened version of
Antennas and Cables Sebastian Büttrich, wire.less.dk edit: September 2009, Pokhara, Nepal Shortened version of http://www.itrainonline.org/itrainonline/mmtk/wireless_en/08_antennas_cables/08_en_mmtk_wireless_antennas-cables_slides.odp
More informationNX 7.5. Table of Contents. Lesson 3 More Features
NX 7.5 Lesson 3 More Features Pre-reqs/Technical Skills Basic computer use Completion of NX 7.5 Lessons 1&2 Expectations Read lesson material Implement steps in software while reading through lesson material
More informationPrecast Concrete Industry Extensions for Autodesk Revit Structure 2014
Precast Concrete Industry Extensions for Autodesk Revit Structure 2014 Reinhard Lackner Managing Director - IDAT Join us on Twitter: #AU2013 Class summary This class shows how extensions to Autodesk Revit
More informationThe CReSIS Anechoic Chamber is located at: The University of Kansas. M2SEC building W 15 th St. Lawrence, KS
The CReSIS Anechoic Chamber is located at: The University of Kansas M2SEC building 1536 W 15 th St Lawrence, KS 66045 Pattern Manual Antenna radiation pattern measurement 1. To open EMQuest, right click
More informationCADPIPE Industrial Pipe. Tutorial
CADPIPE Industrial Pipe Tutorial Introduction This Tutorial is a brief introduction to the power of CADPIPE 3D DESIGN. We will show you a few key features and the general procedures for creating 3D piping
More informationIsometric Circles and Arcs
AutoCAD and Its Applications BASICS Supplemental Material Chapter 4 Isometric Circles and Arcs On an isometric drawing, circles appear as ellipses and arcs as elliptical arcs. You must properly align isometric
More informationRECOMMENDATION ITU-R P HF PROPAGATION PREDICTION METHOD* (Question ITU-R 223/3)
Rec. ITU-R P.533-6 1 RECOMMENDATION ITU-R P.533-6 HF PROPAGATION PREDICTION METHOD* (Question ITU-R 223/3) Rec. ITU-R P.533-6 (1978-1982-1990-1992-1994-1995-1999) The ITU Radiocommunication Assembly, considering
More informationConquering the Rubicon
Autodesk Inventor R10 Fundamentals: Conquering the Rubicon Elise Moss SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Schroff Development Corporation P.O. Box 1334
More informationRTTY: an FSK decoder program for Linux. Jesús Arias (EB1DIX)
RTTY: an FSK decoder program for Linux. Jesús Arias (EB1DIX) June 15, 2001 Contents 1 rtty-2.0 Program Description. 2 1.1 What is RTTY........................................... 2 1.1.1 The RTTY transmissions.................................
More informationTechnician License Course Chapter 4. Lesson Plan Module 9 Antenna Fundamentals, Feed Lines & SWR
Technician License Course Chapter 4 Lesson Plan Module 9 Antenna Fundamentals, Feed Lines & SWR The Antenna System Antenna: Transforms current into radio waves (transmit) and vice versa (receive). Feed
More informationAutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices.
AutoCAD 2018 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to
More informationWHITEPAPER: PILOT PROJECT August 2016 Powerhouse & BIM Equity
RÅDGIVNING SERVICES TEKNOLOGI WHITEPAPER: PILOT PROJECT August 2016 Powerhouse & BIM Equity 1.0 PROJECT: HOUSE IN TAARBÆK This whitepaper contains a project specific method for using ARCHICAD as BIM tool
More informationCAD Mechanical Design I
EXAM INFORMATION Items 58 Points 85 Prerequisites NONE Course Length ONE SEMESTER Career Cluster ARCHITECTURE AND CONSTRUCTION MANUFACTURING SCIENCE, TECHNOLOGY, ENGINEERING AND MATHEMATICS Performance
More informationMastering AutoCAD 2D
Course description: Mastering AutoCAD 2D Design and shape the world around you with the powerful, flexible features found in AutoCAD software, one of the world s leading 2D design applications. With robust
More informationTraveling Wave Antennas
Traveling Wave Antennas Antennas with open-ended wires where the current must go to zero (dipoles, monopoles, etc.) can be characterized as standing wave antennas or resonant antennas. The current on these
More informationSoftware for design and manufacture of stairs
Software for design and manufacture of stairs From sales to production Picture by Drömtrappor elecosoft.com/staircon Streamline stair production and increase sales The complete software for stair manufacturers
More informationUsing Malå GPR systems with GPS equipment
Using Malå GPR systems with GPS equipment Description of problem In many situations it is convenient to use a GPS to keep track of the position in terms of x- and y-coordinates for all measured GPR profiles.
More informationMethodological guidelines for the use of ground penetrating radars
Methodological guidelines for the use of ground penetrating radars Series 3, Software version 3.8.1.0 Transient Technologies 2004 2015 Transient Technologies LLC office 604, 13, Maryny Raskovoi str., Kyiv,
More informationLINK RESEARCH ANTENNA PRODUCT MANUAL. Antennas for Digital ENG applications
LINK RESEARCH ANTENNA PRODUCT MANUAL Antennas for Digital ENG applications Contact: Link Research Main +44 (0) 1923 474 060 Support +44 (0) 1923 474 099 Web: www.linkres.co.uk Contents 3: Flexible omni
More information