Contour Module for MountainsMap
|
|
- Clifton Griffin
- 5 years ago
- Views:
Transcription
1 All the essential tools for geometric dimensioning & tolerancing of profiles Calculate dimensions of profiles using interactive tools Define & display pass/fail criteria with tolerances for any dimension Easy-to-use icon-based user interface Save time with automation features Generate analysis reports quickly and easily Export results to quality management systems
2 Smart dimensioning Origin and alignment Setting the origin. The origin of the drawing can be set using the Modify the origin tool. Click on an existing point to set X-origin, Y-origin or X- and Y-origins or alternatively enter coordinates manually. Alignment. Before dimensions are defined a profile can be aligned vertically or horizontally as a whole or with respect to a segment. Create geometrical elements Intelligent element creation tools. Elements are created using intelligent tools that lock onto shapes. Segments: create segments on profiles quickly and easily. Arcs: create arcs on profiles. Circles: create circles on profiles. Points: click anywhere on a profile to create a point or enter coordinates manually. Intersection points: nearest or farthest intersection point of two elements, extend element to intersection point. Aligning a profile Creating a segment Dimensioning Once all elements have been created, a set of powerful dimensioning tools is available. Every tool has its own icon to make it easy to find and simple to use. The Contour Module for MountainsMap allows you to obtain the dimensions of: Distances: horizontal, vertical and oblique distance between two points on the profile. Radii: radius of an arc or circle. Diameters: diameter of a circle. Angles: angle between two segments, supplementary and reflex angles. Obtain dimensions of segments, arcs and circles 2
3 Keep track of your work Identify dimensions quickly and easily by creating personalized labels or displaying each dimension s unique ID number. Dimension format (color, decimal places, arrow style, etc.) is user-definable. As you work, a table of results is completed automatically and can be displayed at any time (only available with certain MountainsMap product packages). Table of results. Useful for grouping together all the dimensions obtained on a profile. Basic tolerancing Pass/fail criteria with tolerances can be defined for any dimension. A table of analysis results listing all dimensions and their pass/fail status can be displayed (only available with certain MountainsMap product packages). Pass/fail status can be displayed on the profile or shown graphically 3
4 Save time & increase productivity with automation features The Contour Module for MountainsMap allows you to save your contour analysis steps and reapply them on other profiles. This can be achieved in several ways: - Substitution: substitute your profile with another in the analysis workflow (MountainsMap instantly recalculates analysis steps) - Minidocs: create a Minidoc (macro) that can be reapplied on other data Templates: save your analysis document as a template and apply it to another profile or to a folder containing a set of profiles The position of the profiles analyzed (the absolute coordinates in the XZ plane) should be roughly the same as that of the original profile. However, even if the profile s position is a little different, it is still possible to manually adjust it. 1. Carry out contour analysis on your first profile 2. Substitute this profile for another in the workflow Click here 3. Analysis is instantly recalculated for the new profile 4. You may adjust position if necessary 4
5 What kinds of profiles can be analyzed with the Contour Module for MountainsMap? Contour Analysis is essentially applied to profiles measured on mechanical parts. The following profile types may be analyzed with the Contour Module for MountainsMap : - Horizontal profiles - Vertical profiles - Parametric profiles (allowing overhangs and closed elements). Patching multiple profiles It is possible to open several profiles at the same time. Using the Patch profiles operator, two or more profiles can be patched into one (parametric) profile which can then be analyzed. Options for extracting contours You may also extract horizontal contours from 3D surfaces or images using the Extract contour operator. Options are available for defining how contour should be extracted as well as for smoothing the resulting profile. 5
6 MountainsMap SEM Analyze & report on your data The MountainsMap way With the Contour module, benefit from MountainsMap software s unique, intuitive design with its easy-to-use tools allowing you to achieve results quickly and efficiently. Visual analysis reports In MountainsMap you build a visual analysis report frame by frame, page by page, working in a comfortable desktop publishing environment. Frames contain views of your data, results, analytical studies, ISO and national parameters, measurement identity cards, comments and illustrations. You can navigate to any frame in a report by selecting it in the page viewer. Smart user environment The smart user environment - with logical top-down organization of all functions and contextual objectoriented ribbons means that you can go from idea to action with minimum effort. A full screen mode provides maximum comfort when you are carrying out a specific analytical study. Furthermore you can work in your own language thanks to the fact that the user interface - including expanded graphical tooltips that provide a first level of help is available in 11 languages (EN, FR, DE, ES, IT, PL, BR, JP, CN, KR, RU). In addition, a complete reference manual (EN, FR, DE, JP) with illustrations and examples can be accessed simply by pressing the F1 key. Full metrological traceability Every analysis step is recorded in a hierarchical analysis workflow to assure full metrological traceability. Analysis steps in the workflow can be fine tuned at any time. All dependent steps are recalculated automatically. Powerful automation features Once an analysis report has been completed it can be applied as a template to automate the analysis of multiple measurement data files. In addition, common sequences of analysis steps can be saved in a library for insertion into future analysis reports to save time. Data export Frames and pages can be exported as bitmaps up to 1200 dpi for poster sessions. Finished reports can be exported in PDF and RTF formats for easy circulation. Export multi-page analysis reports Intuitive icon-based toolbars All numerical results, including pass/fail status, are accessible in the Results Manager panel and can be exported in Excel-compatible text files for interfacing with third party software, including quality management software. Work in your preferred language 6
7 Contour Module for MountainsMap software Selected features Dimensional analysis Linear dimensions: horizontal, vertical and oblique Radial dimensions: radius of arc, diameter of circle Angular dimensions: angle between two line segments, open angle of arc, supplementary, reflex or salient angle Tolerances Intelligent nominal form definition Specified for any dimension Defined by value and tolerance or upper and lower limits Elements (points, lines, arcs, circles) lock onto shapes Interactive dimensioning Profile compatibility Patch profiles Contour extraction Horizontal or vertical open profile support Parametric profile support All existing profile file formats are supported Assemble multiple contours for analysis Extract a horizontal profile from the X,Y plane (available on 3D surfaces & images) Data normalization Set origin on any constructed element with automatic recalculation of dependent values Profile alignment and rotation: manual, vertical/horizontal alignment with respect to selected element or two points on profile Interactivity Automation User interface Define elements by clicking on the profile Modify elements and dimensions at any time with automatic recalculation of dependencies Move and resize dimension labels Change colors of individual elements and objects Automatic analysis of series of measurements Automatic data export (spreadsheet or text file) for interfacing with third party systems Icon-driven from toolbars Full screen mode with zoom in/out Unlimited undo/redo Instant report generation Digital Surf Head Office & R&D Center Digital Surf, 16 rue Lavoisier, Besançon, France Tel contact@digitalsurf.com Digital Surf. All rights reserved. Specifications subject to change without prior notice. Doc Revision:
Table of Contents. Lesson 1 Getting Started
NX Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard
More informationGeometry Controls and Report
Geometry Controls and Report 2014 InnovMetric Software Inc. All rights reserved. Reproduction in part or in whole in any way without permission from InnovMetric Software is strictly prohibited except for
More informationSolidWorks 95 User s Guide
SolidWorks 95 User s Guide Disclaimer: The following User Guide was extracted from SolidWorks 95 Help files and was not originally distributed in this format. All content 1995, SolidWorks Corporation Contents
More informationChapter 2. Drawing Sketches for Solid Models. Learning Objectives
Chapter 2 Drawing Sketches for Solid Models Learning Objectives After completing this chapter, you will be able to: Start a new template file to draw sketches. Set up the sketching environment. Use various
More informationUsing Siemens NX 11 Software. The connecting rod
Using Siemens NX 11 Software The connecting rod Based on a Catia tutorial written by Loïc Stefanski. At the end of this manual, you should obtain the following part: 1 Introduction. Start NX 11 and open
More informationTraining Guide Basics
Training Guide Basics 2014, Missler Software. 7, Rue du Bois Sauvage F-91055 Evry, FRANCE Web: www.topsolid.com E-mail: info@topsolid.com All rights reserved. TopSolid Design Basics This information is
More informationMETBD 110 Hands-On 17 Dimensioning Sketches
METBD 110 Hands-On 17 Dimensioning Sketches Why: Recall, Pro/E can capture design intent through the use of geometric constraints, dimensional constraints, and parametric relations. Dimensional constraints
More informationMastering AutoCAD 2D
Course description: Mastering AutoCAD 2D Design and shape the world around you with the powerful, flexible features found in AutoCAD software, one of the world s leading 2D design applications. With robust
More information< Then click on this icon on the vertical tool bar that pops up on the left side.
Pipe Cavity Tutorial Introduction The CADMAX Solid Master Tutorial is a great way to learn about the benefits of feature-based parametric solid modeling with CADMAX. We have assembled several typical parts
More informationChapter 1. Creating, Profiling, Constraining, and Dimensioning the Basic Sketch. Learning Objectives. Commands Covered
Chapter 1 Creating, Profiling, Constraining, and Dimensioning the Basic Sketch Learning Objectives After completing this chapter, you will be able to: Draw the basic outline (sketch) of designer model.
More informationAutoCAD LT 2009 Tutorial
AutoCAD LT 2009 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2009 Tutorial 1-1 Lesson
More informationSDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation Oregon Institute of Technology
AutoCAD LT 2007 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com AutoCAD LT 2007 Tutorial 1-1 Lesson 1 Geometric
More information1 Sketching. Introduction
1 Sketching Introduction Sketching is arguably one of the more difficult techniques to master in NX, but it is well-worth the effort. A single sketch can capture a tremendous amount of design intent, and
More informationAn Introduction to Dimensioning Dimension Elements-
An Introduction to Dimensioning A precise drawing plotted to scale often does not convey enough information for builders to construct your design. Usually you add annotation showing object measurements
More informationSiemens NX11 tutorials. The angled part
Siemens NX11 tutorials The angled part Adaptation to NX 11 from notes from a seminar Drive-to-trial organized by IBM and GDTech. This tutorial will help you design the mechanical presented in the figure
More informationDimensioning the Rectangular Problem
C h a p t e r 3 Dimensioning the Rectangular Problem In this chapter, you will learn the following to World Class standards: 1. Creating new layers in an AutoCAD drawing 2. Placing Centerlines on the drawing
More informationIntroduction to Revolve - A Glass
Introduction to Revolve - A Glass Design & Communication Graphics 1 Object Analysis sheet Design & Communication Graphics 2 Prerequisite Knowledge Previous knowledge of the following commands are required
More informationENGINEERING GRAPHICS ESSENTIALS
ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive
More informationAutodesk Advance Steel. Drawing Style Manager s guide
Autodesk Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction... 5 Details and Detail Views... 6 Drawing Styles... 6 Drawing Style Manager... 8 Accessing the Drawing Style
More informationAdvance Steel. Drawing Style Manager s guide
Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction...7 Details and Detail Views...8 Drawing Styles...8 Drawing Style Manager...9 Accessing the Drawing Style Manager...9
More informationME Week 2 Project 2 Flange Manifold Part
1 Project 2 - Flange Manifold Part 1.1 Instructions This project focuses on additional sketching methods and sketching commands. Revolve and Work features are also introduced. The part being modeled is
More informationQuick Start for Autodesk Inventor
Quick Start for Autodesk Inventor Autodesk Inventor Professional is a 3D mechanical design tool with powerful solid modeling capabilities and an intuitive interface. In this lesson, you use a typical workflow
More informationAutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices.
AutoCAD 2018 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to
More informationAutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS. Schroff Development Corporation
AutoCAD LT 2012 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation AutoCAD LT 2012 Tutorial 1-1 Lesson 1 Geometric Construction
More informationTutorial Guide to AutoCAD 2014
Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites
More informationIntroduction to Autodesk Inventor for F1 in Schools (Australian Version)
Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital
More informationTutorial Guide to AutoCAD 2013
Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com
More information1: INTRODUCTION TO AUTOCAD
AutoCAD syllabus 1: INTRODUCTION TO AUTOCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Navigation bar Status bar Invoking Commands in AutoCAD Keyboard Ribbon Application Menu
More informationTutorial Guide to AutoCAD 2015
Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationWelcome to Corel DESIGNER, a comprehensive vector-based package for technical graphic users and technical illustrators.
Workspace tour Welcome to Corel DESIGNER, a comprehensive vector-based package for technical graphic users and technical illustrators. This tutorial will help you become familiar with the terminology and
More informationSOLIDWORKS 2015 and Engineering Graphics
SOLIDWORKS 2015 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationArchitecture 2012 Fundamentals
Autodesk Revit Architecture 2012 Fundamentals Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial files on enclosed CD Visit
More informationUsing Dynamic Views. Module Overview. Module Prerequisites. Module Objectives
Using Dynamic Views Module Overview The term dynamic views refers to a method of composing drawings that is a new approach to managing projects. Dynamic views can help you to: automate sheet creation;
More informationStarting a 3D Modeling Part File
1 How to Create a 3D Model and Corresponding 2D Drawing with Dimensions, GDT (Geometric Dimensioning and Tolerance) Symbols and Title Block in SolidWorks 2013-2014 By Edward Locke This tutorial will introduce
More informationGstarCAD Mechanical 2015 Help
1 Chapter 1 GstarCAD Mechanical 2015 Introduction Abstract GstarCAD Mechanical 2015 drafting/design software, covers all fields of mechanical design. It supplies the latest standard parts library, symbols
More informationTABLE OF CONTENTS INTRODUCTION...4
Starting Guide TABLE OF CONTENTS INTRODUCTION...4 Advance Steel... 4 Where to find information?... 5 INSTALLATION... 5 System requirements... 5 Starting the installation... 5 STARTING ADVANCE STEEL...
More informationPRODIM CT 3.0 MANUAL the complete solution
PRODIM CT 3.0 MANUAL the complete solution We measure it all! General information Copyright All rights reserved. Apart from the legally laid down exceptions, no part of this publication may be reproduced,
More informationand Engineering Graphics
SOLIDWORKS 2018 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationRelative Coordinates
AutoCAD Essentials Most drawings are created using relative coordinates. This means that the next point is set from the last point drawn. The last point drawn is stored as temporary 0,0". AutoCAD uses
More informationGenerations Automatic Stand-Alone Lace By Bernie Griffith Generations Software
We are going to create an open Italian lace. Generations software products provide advanced image processing features allowing for the creation of stand-alone lace with just a few simple techniques. A
More informationAdvance Dimensioning and Base Feature Options
Chapter 4 Advance Dimensioning and Base Feature Options Learning Objectives After completing this chapter you will be able to: Dimension the sketch using the autodimension sketch tool. Dimension the sketch
More informationModule 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge
Inventor (10) Module 1G: 1G- 1 Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge In Module 1A, we have explored
More informationPrinciples and Practice:
Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2014 Randy H. Shih Multimedia Disc SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations
More informationFunctional Tolerancing and Annotations
Functional Tolerancing and Annotations Preface Getting Started Basic Tasks Advanced Tasks Workbench Description Customizing Glossary Index Dassault Systèmes 1994-2000. All rights reserved. Preface CATIA
More informationCopyrighted. Material. Copyrighted. Material. Copyrighted. Copyrighted. Material
Engineering Graphics FREEHAND SKETCHING Introduction to Freehand Sketching Sketching is a very important technique for technical communication. Sketches can transfer ideas, instructions and information
More informationCreo Parametric Primer
PTC Creo Parametric - Primer Student and Academic Editions 02 Helpful hints are enclosed in red brackets or round bubbles like this one! Creo Parametric Primer THIS VERSION OF THE CREO PRIMER HAS BEEN
More informationDimensioning. Subject Matters:
Objectives: To define dimensioning. To recognise the different types of dimensions. To define and create a dimension style. To recognise the dimension toolbar and the dimensioning commands. To create dimensions
More informationAutoCAD 2020 Fundamentals
Autodesk AutoCAD 2020 Fundamentals ELISE MOSS Autodesk Certified Instructor SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationCreate all plan and profile sheets in the current drawing. Create all plan and profile sheets in individual drawings.
NOTES Module 18 Roadway Plan Production In this module, you learn how to work with Roadway Plan Production tools in AutoCAD Civil 3D. The Plan Production tools are used to automate the generation of plan
More informationMechanical Design CATIA - Interactive Drafting 1 (ID1) CATIA V5R20
Mechanical Design CATIA - Interactive Drafting 1 (ID1) CATIA V5R20 Mechanical Design CATIA - Interactive Drafting Address 2D design and drawing production requirements. Product overview Interactive Drafting
More informationBeginner s Guide to SolidWorks Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS
Beginner s Guide to SolidWorks 2008 Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Part Modeling
More informationWhen you complete this assignment you will:
Objjectiives When you complete this assignment you will: 1. Set-up menus and drawing for designing modeling problems. 2. become familiar with the Sketch menu tools and commands. 3. Produce a three-dimensional
More informationGetting Started. Before You Begin, make sure you customized the following settings:
Getting Started Getting Started Before getting into the detailed instructions for using Generative Drafting, the following tutorial aims at giving you a feel of what you can do with the product. It provides
More informationAnna Gresham School of Landscape Design. CAD for Beginners. CAD 3: Using the Drawing Tools and Blocks
Anna Gresham School of Landscape Design CAD for Beginners CAD 3: Using the Drawing Tools and Blocks Amended for DraftSight V4 October 2013 INDEX OF TOPICS for CAD 3 Pages ESnap 3-5 Essential drawing tools
More informationCreo Revolve Tutorial
Creo Revolve Tutorial Setup 1. Open Creo Parametric Note: Refer back to the Creo Extrude Tutorial for references and screen shots of the Creo layout 2. Set Working Directory a. From the Model Tree navigate
More informationPrinciples and Practice
Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationn 4ce Professional Module
n 4ce Fact Sheet n 4ce Professional Module For the discerning user with specialist needs, n 4ce Professional provides extra facilities in Design and 3D presentations. Using the same platform as Lite, extra
More informationExplanation of buttons used for sketching in Unigraphics
Explanation of buttons used for sketching in Unigraphics Sketcher Tool Bar Finish Sketch is for exiting the Sketcher Task Environment. Sketch Name is the name of the current active sketch. You can also
More informationAutodesk Inventor Module 17 Angles
Inventor Self-paced ecourse Autodesk Inventor Module 17 Angles Learning Outcomes When you have completed this module, you will be able to: 1 Describe drawing inclined lines, aligned and angular dimensions,
More informationSolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI
SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered
More informationMick Hodgson. Tekla Structures, Tekla Versions And Software Evolution
Mick Hodgson 2018 Tekla Structures, Tekla Versions And Software Evolution Tekla Version 15 Main Points Unlimited Models Quick modelling tools Fast drawing production Tube CNC Tekla Version 15 Main Points
More informationLesson 4 Holes and Rounds
Lesson 4 Holes and Rounds 111 Figure 4.1 Breaker OBJECTIVES Sketch arcs in sections Create a straight hole through a part Complete a Sketched hole Understand the Hole Tool Use Info to extract information
More informationStudent + Instructor:
BLUE boxed notes are intended as aids to the lecturer RED boxed notes are comments that the lecturer could make Show 01 Solid Modeling Intro slides quickly. SolidWorks Layout slides are on EEIC for reference
More informationAutoCAD 2018 Fundamentals
Autodesk AutoCAD 2018 Fundamentals Elise Moss SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more about
More informationPolyWorks Inspector Standard. 3 Day Course
PolyWorks Inspector Standard INTRODUCTION TO POLYWORKS Workspace Manager Basic Options File and Project Structures PolyWorks License Manager INTRODUCTION TO POLYWORKS INSPECTOR User Interface Basic Options
More informationTechnical Drawing 101 with AutoCAD 2018
Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.
More informationEvaluation Chapter by CADArtifex
The premium provider of learning products and solutions www.cadartifex.com EVALUATION CHAPTER 2 Drawing Sketches with SOLIDWORKS In this chapter: Invoking the Part Modeling Environment Invoking the Sketching
More informationfor Solidworks TRAINING GUIDE LESSON-9-CAD
for Solidworks TRAINING GUIDE LESSON-9-CAD Mastercam for SolidWorks Training Guide Objectives You will create the geometry for SolidWorks-Lesson-9 using SolidWorks 3D CAD software. You will be working
More informationDIMENSIONING ENGINEERING DRAWINGS
DIMENSIONING ENGINEERING DRAWINGS An engineering drawing must be properly dimensioned in order to convey the designer s intent to the end user. Dimensions provide the information needed to specify the
More informationUNIT 11: Revolved and Extruded Shapes
UNIT 11: Revolved and Extruded Shapes In addition to basic geometric shapes and importing of three-dimensional STL files, SOLIDCast allows you to create three-dimensional shapes that are formed by revolving
More informationwith MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation
with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation WWW.SCHROFF.COM Lesson 1 Geometric Construction Basics AutoCAD LT 2002 Tutorial 1-1 1-2 AutoCAD LT 2002 Tutorial
More informationCAD Tutorial 24: Step by Step Guide
CAD TUTORIAL 24: Step by step CAD Tutorial 24: Step by Step Guide Level of Difficulty Time Approximately 40 50 minutes Lesson Objectives To understand the basic tools used in SketchUp. To understand the
More informationOrnamental Pro 2004 Instruction Manual (Drawing Basics)
Ornamental Pro 2004 Instruction Manual (Drawing Basics) http://www.ornametalpro.com/support/techsupport.htm Introduction Ornamental Pro has hundreds of functions that you can use to create your drawings.
More informationBelow are the desired outcomes and usage competencies based on the completion of Project 4.
Engineering Design with SolidWorks Project 4 Below are the desired outcomes and usage competencies based on the completion of Project 4. Project Desired Outcomes: An understanding of the customer s requirements
More informationMechanical Design. CATIA - 3D Functional Tolerancing and Annotations 2 (FTA) CATIA V5R20
Mechanical Design CATIA - 3D Functional Tolerancing and Annotations 2 (FTA) CATIA V5R20 Mechanical Design CATIA - 3D Functional Tolerancing and Annotations Define and manage tolerance specifications and
More informationCREO.1 MODELING A BELT WHEEL
CREO.1 MODELING A BELT WHEEL Figure 1: A belt wheel modeled in this exercise. Learning Targets In this exercise you will learn: Using symmetry when sketching Using pattern to copy features Using RMB when
More informationAutodesk AutoCAD 2013 Fundamentals
Autodesk AutoCAD 2013 Fundamentals Elise Moss SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites to learn more
More informationStep-by-Step Tutorial: Applying Dimensional Constraints
New Commands in AutoCAD 2010: Part 1 Dimensional Constraints, Part 1 by Ralph Grabowski Introduction One of the really significant new features of AutoCAD 2010 is parametric drafting. This technology allows
More informationUnit. Drawing Accurately OVERVIEW OBJECTIVES INTRODUCTION 8-1
8-1 Unit 8 Drawing Accurately OVERVIEW When you attempt to pick points on the screen, you may have difficulty locating an exact position without some type of help. Typing the point coordinates is one method.
More information1. Create a 2D sketch 2. Create geometry in a sketch 3. Use constraints to position geometry 4. Use dimensions to set the size of geometry
2.1: Sketching Many features that you create in Fusion 360 start with a 2D sketch. In order to create intelligent and predictable designs, a good understanding of how to create sketches and how to apply
More informationAutodesk Inventor. In Engineering Design & Drafting. By Edward Locke
Autodesk Inventor In Engineering Design & Drafting By Edward Locke Engineering Design Drafting Essentials Working Drawings: Orthographic Projection Views (multi-view, auxiliary view, details and sections)
More informationUser Guide V10 SP1 Addendum
Alibre Design User Guide V10 SP1 Addendum Copyrights Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or
More informationCreo Parametric Primer
Creo Parametric Primer Creo Parametric Primer Education Editions 2 C2-SE-L1-004-1.0 Written by Tim Brotherhood and Adam Haas Conditions of use Acknowledgements Feedback tbrotherhood@ptc.com Product code
More informationCOMPUTER AIDED DRAFTING LAB (333) SMESTER 4
COMPUTER AIDED DRAFTING LAB (333) SMESTER 4 Introduction to Computer Aided Drafting: The method of preparing engineering drawing by using the computer software is known as Computer Aided Drafting (CAD).
More informationEngineering Technology
Engineering Technology Introduction to Parametric Modelling Engineering Technology 1 See Saw Exercise Part 1 Base Commands used New Part This lesson includes Sketching, Extruded Boss/Base, Hole Wizard,
More informationCreo Parametric 4.0 Basic Design
Creo Parametric 4.0 Basic Design Contents Table of Contents Introduction...1 Objective of This Textbook...1 Textbook Outline...2 Textbook Conventions...3 Exercise Files...3 System Configuration...4 Notes
More informationTutorial 1: Install Forecaster HD (Win XP, Vista, 7, 8)
Tutorial 1: Install Forecaster HD (Win XP, Vista, 7, 8) Download Forecaster HD (FHD) from Community s website http://www.communitypro.com/productlist/135-forecaster-ceiling-system-software Open Setup.exe
More informationRevit Structure 2012 Basics:
SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural
More informationThis document describes the new features of MTpro version as compared to MTpro
New features in MTpro 3.6 This document describes the new features of MTpro version 3.6.0.0 as compared to MTpro 3.5.0.0. Table of contents 1 General... 2 2 New contents... 3 2.1 New CAD models... 3 2.2
More informationGetting Started. Chapter. Objectives
Chapter 1 Getting Started Autodesk Inventor has a context-sensitive user interface that provides you with the tools relevant to the tasks being performed. A comprehensive online help and tutorial system
More informationUNIT 1 GEOMETRY. (revision from 1 st ESO) Unit 8 in our books
UNIT 1 GEOMETRY (revision from 1 st ESO) Unit 8 in our books WHAT'S GEOMETRY? Geometry is the study of the size, shape and position of 2 dimensional shapes and 3 dimensional figures. In geometry, one explores
More informationModule 1H: Creating an Ellipse-Based Cylindrical Sheet-metal Lateral Piece
Inventor (10) Module 1H: 1H- 1 Module 1H: Creating an Ellipse-Based Cylindrical Sheet-metal Lateral Piece In this Module, we will learn how to create an ellipse-based cylindrical sheetmetal lateral piece
More informationCAD/CAM Lamp Project using 2D Design and the X-660 Laser Cutter
CAD/CAM Lamp Project using 2D Design and the X-660 Laser Cutter Paul Tate 2008 Booklet Version 2 Getting Started the preliminaries The Laser cutter which is going to cut out your acrylic bases and polypropylene
More informationCreo Parametric Primer
Creo Parametric Primer Creo Parametric Primer Education Editions C1-SE-L1-004-1.0 Written by Tim Brotherhood and Adam Haas Conditions of use Acknowledgements Feedback tbrotherhood@ptc.com Product code
More informationDrawing and Assembling
Youth Explore Trades Skills Description In this activity the six sides of a die will be drawn and then assembled together. The intent is to understand how constraints are used to lock individual parts
More informationLesson 4 Extrusions OBJECTIVES. Extrusions
Lesson 4 Extrusions Figure 4.1 Clamp OBJECTIVES Create a feature using an Extruded protrusion Understand Setup and Environment settings Define and set a Material type Create and use Datum features Sketch
More informationIntroduction to Engineering Design. Part A
Introduction to Engineering Design Final Examination Part A Spring 2005 Student Name: Date: Class Period: Total Points: Directions: Select the letter of the response which best completes the item or answers
More informationFUSION 360: SKETCHING FOR MAKERS
FUSION 360: SKETCHING FOR MAKERS LaDeana Dockery 2017 MAKEICT Wichita, KS 1 Table of Contents Interface... 1 File Operations... 1 Opening Existing Models... 1 Mouse Navigation... 1 Preferences... 2 Navigation
More informationRevit Structure 2014 Basics
Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More information