MODEC GIS Microstation
|
|
- Gloria Lane
- 5 years ago
- Views:
Transcription
1 MODEC Microstation
2 Sheet wise Sliver, Gap (Pseudo-Node) (Self Intersection) (Island) Duplication
3 Seamless Database ) Code Page
4
5
6 Working Units : WGS84 UTM Working Units Working Units GO=500000, Master Unit = m Sub Unit = cm Master Unit /Sub Unit = 100 Position Unit/Sub Unit = 10 : 1 Global Origin
7 (GPS 1 ) GPS 2 Global Positioning System
8
9 Autocad Microstation Microstation v8
10 Open Reference File Reference File Attach Enter Tool Reference File Attach Reference File Attach Reference File Microstation
11 Pattern (Pattern) Change Element Microstation V.8 Microstation V.5 Delete Pattern Pattern Pattern Attribute Snap Microstation Modify Element Snap (Node) Delete Part Of Element Intersection Snap Mode Delete Part Of Element Highlight Partial Delete
12 Extend Extend Element to Modify Element Keypoint Snap mode Intersection Highlight MicroStation Extend Element to Intersection MicroStation Modify Element Select first element for extention Select element for intersection Accept - Initiate intersection
13 MicroStation Modify Element MicroStation Identify element Accept/Reject (select next input) Modify Element Snap Keypoint Snap Snap Snap
14 Sliver Gap Sliver Gap Sliver Gap Gap Sliver Modify Element Sliver Gap : Microstation Pallets<Main<Modify Element : Modify Element Delete Part of Element Extend Line Extend 2 Elements to Intersection Extend Element to Intersection Trim Element Insert Vertex Delete Vertex Modify Element Tools>Main>Modify Modify Element Partial Delete Extend Line Extend Elements to Intersection Trim Elements Intelli Trim
15 Insert Vertex Delete Vertex Microstation Snap Extend Snap Snap Extend Snap Extend Snap Snap Snap
16 Arc-node Line String Line (Shape) Drop Element Microstation 1 Split
17 Chain Main Microstation Creat Complex Shape Create Complex Chain Group Main 1 Node 2 Manual method 3 Automatic method
18 Snap Snap 1 Microstation : Microstation Change Element Attributes Symbology Change Element Color Main 1 Arcs of lines
19 Main Chain Automatic Create Complex Chain Microstation Settings Coordinate Readout Palette Chain MicroStation Symbology Change Attributes Main Color Change Element Attributes Main Palette Group Create Complex Chain MaxGap Automatic Method Chain Design Settings MaxGap Coordinate Readout File ARC Cell Edit Edit Select By Attributes Select By Chain SelectBy
20 Select By Chain Change Element To Active Symbology Microstation Change Element Microstation Complex Chain Complex Chain Duplicate Pattern Arc 1 Arc
21 Microstation Fence ARC Main Palette Zoom Out Place Fence Fence Palette Fence Block. Inside Lock Box Fence Selection : Ustn> Fence Ustn>ff= D:\ { } Fence. : Zoom Out Element Selection Edit File New Copy ARC Create Complex Automatic Symbology Method Main Palette Shape MaxGap Chain MaxGap Shape
22 Settings Coordinate Readout MicroStation Change Attributes Main Color Change Element Attributes Main Palette Group Symbology Create Complex Shape MaxGap Automatic Method MaxGap Shape Design File Settings Coordinate Readout Cell Edit Select By Attributes Select By Edit Select Shape. Shape By Select Shape. By
23 Fence Fence Contents On Inside Fence Selection Merge. Delete Merge. Reference Arc. Feature forming.
24 : (Duplication {Microstation_Drive}:USTATION\UTILS <DELDUP MicroStation Duplicates Done Data Cleanup Duplicate Utilities Design File Cleanup Delete Action overlay) : Microstation File<Reference<Tools<Attach
25 NTDB NTDB Sheet-wise EXPORT Export
26 Export. Line String.. (Self Intersection)
27 . Complex Chain Complex Chain. Border. Border.. Edge matching..
28 Line String Undershoot. Text Text Text
29 Shape Drop Shape. Line max gap Line gap Shape Line Line String Line Shape 1
30 Join (Seamless) Seamless Database
31 Unicode Unicode Unicode Code Page Code Page Code Page Unicode
32 Text Complex Chain Border Border
33 Snap undershoot overshoot Node Extend Snap Snap Snap Snap.. Node undershoot overshoot
34 Edge matching.. Text
35
36 K K Tranch
37 K K TL VL Emban Power Tel Cabin Acut
38 K K Rail TREE
39 K K
40 Complex Chain Border Border undershoot overshoot Node
41 Text
42 K K
43 K K RTU
44
45
46
47 Type Level Color Weight Style Go = Working units Master unit = m Sub unit = Cm Master unit / Sub unit = 100 Position unit / Sub unit = 10 Microstation Duplication
48 Duplication Label ID Label ID Duplicate Duplicate Duplicate Pattern Pattern Node Arc Arc Node Arc Arc Arc Node
49 Edge Matching Match Edge Matching Sliver Gap Sliver Gap Gap Sliver Query Query
50 Duplication Edge Matching Working units Arc Node Pattern Gap, Sliver
51
52 GO= pattern pattern Node Arc
53 Completeness
54 ()
55 GPS GPS GPS
56
57 (NTDB)
58 Shp
59
60
61
62
63
64
65
66 xls
67
68 (MetaData)
69 1 cataloging 2 Data Clearinghouse
70 (Zone) Dataset
71 (Completeness) y x (Definition) Numeric Date Character String (Type) (Domain) (Format) (Notes).
72 Character Character
73 Character o (I-IV) (NW,NE,SE,SW) o (I-IV) (NW,NE,SE,SW) (1A,1B,1C,2A,2B,2C,...,5B,5C) (1A,1B,1C,2A, 2B,2C) Character Sheetwise Character
74 Character Character 1/ < > (Dimensions) Character 2D, 3D Character
75 Character (GPS Character GPS 1/< 1/< > >
76 Date YYYY/MM/DD Date (1900-) (1-12) (1-31) YYYY/MM/DD DD/MM/YYYY Character
77 Character Vector, Raster Character Object- Oriented, Relational Character DGN
78 Character Format Free / Character DGN / DXF Character Format Free Byte Numeric Byte
79 Character Diskette, Tape, CD, Network (zone) Character Hayford, Clarke, WGS84 Character
80 UTM Character,Lambert Conformal, Conic, Geographic Reference UTM UTM (Zone) Zone Numeric Character SI
81 z y, x 90% Numeric x < > m y < > m z < > m Numeric < > %
82 (Completeness) Numeric % < > Character - x,y
83 Numeric ( 180, 180 ) ( 90, 90 ) 1( 2 ( ) ) 1( 2( ) ) n( ) n( ) y x x,y Numeric x1 = x2 = y1 = y2 = xn = yn =
84 y x Numeric x1 = x2 = y1 = y2 = xn = yn = Character Character
85 Character Character Character < > < >
86 Character Character Date YYYY/MM/DD
Using Dynamic Views. Module Overview. Module Prerequisites. Module Objectives
Using Dynamic Views Module Overview The term dynamic views refers to a method of composing drawings that is a new approach to managing projects. Dynamic views can help you to: automate sheet creation;
More informationGeoTools commands summary
GeoTools commands summary The following list of command descriptions show what each one of the GeoTools commands do. All commands shown here work in AutoCAD as well as Bricscad unless otherwise noted.
More informationCHAPTER 15. Cross Section Sheets. None, except batch processing of an input file.
CHAPTER 15 Cross Section Sheets 15.1 Introduction Objectives Project Manager Menu Bar Application Learn the procedures for laying out cross section sheets. Cross Section Sheets None, except batch processing
More informationAECOsim Building Designer. Quick Start Guide. Chapter A08 Space Planning Bentley Systems, Incorporated
AECOsim Building Designer Quick Start Guide Chapter A08 Space Planning 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Space Planning...3 Sketches... 3 SpacePlanner... 4 Create
More informationSharing Data Between CAD and GIS Systems. Lien Alpert Phil Sanchez
Sharing Data Between CAD and GIS Systems Lien Alpert Phil Sanchez Session Overview Discuss current CAD strategies Outline ESRI s CAD support Demonstrate techniques for working with CAD data CAD Strategies
More informationin the list below are available in the Pro version of Scan2CAD
Scan2CAD features Features marked only. in the list below are available in the Pro version of Scan2CAD Scan Scan from inside Scan2CAD using TWAIN (Acquire). Use any TWAIN-compliant scanner of any size.
More informationUsing Map Tools within Autodesk Land Desktop to Maximize Productivity Mike Carris
December 2-5, 2003 MGM Grand Hotel Las Vegas Using Map Tools within Autodesk Land Desktop to Maximize Productivity Mike Carris CV11-2 Autodesk civil engineering solutions include very powerful tools for
More informationAutodesk Map from A to Z
Autodesk Map from A to Z Brian Glidden Course ID: GI11-2 Course outline: 3.5-Hour Tutorial (beginners) Related Class Project Environment of Autodesk Map (GI23-2L) Intermediate Lab Wednesday 4:00 P.M. -
More informationProject Exercise 5 Cells and Cell Library
Project Exercise 5 Cells and Cell Library This project exercise provides step-by-step instructions for creating the design shown in Figure C5-1. The intent is to guide you in creating and using cells.
More information8 References. When you have completed this chapter, you will be able to:
8 References A Reference display shows elements from another model or image in the Active Model. Referenced DGN elements cannot be added to, manipulated or changed in any way. However, they can be snapped
More informationOhio Department of Transportation, VBA Documentation
Contents 1.1 Current Versions... 2 1.2 Overview... 3 1.3 Supporting Files and Standards... 4 1.3.1 ODOT_Drainage.cel... 4 1.3.2 ODOT2013.ddb... 5 1.4 ODOT_StormSewerPlan2013.mvba... 6 1.4.1 Mode: Place
More information5 More Than Straight Lines
5 We have drawn lines, shapes, even a circle or two, but we need more element types to create designs efficiently. A 2D design is a flat representation of what are generally 3D objects, represented basically
More information1: INTRODUCTION TO AUTOCAD
AutoCAD syllabus 1: INTRODUCTION TO AUTOCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Navigation bar Status bar Invoking Commands in AutoCAD Keyboard Ribbon Application Menu
More informationThe Microstation configuration must be set up with the correct CAD resource files as outlined in SPEC
1.0 PURPOSE 016/08/6 1/11 This specification describes the procedure for working with the Vale standard drawing border in Microstation V8i, covering the border insertion and filling the border information..0
More information[Use Element Selection tool to move raster towards green block.]
Demo.dgn 01 High Performance Display Bentley Descartes has been designed to seamlessly integrate into the Raster Manager and all tool boxes, menus, dialog boxes, and other interface operations are consistent
More informationThe coordinate system and vertical datum shall be noted in the drawing in the metadata.
Purpose This document is provided for informational purposes and to assure data compatibility and compliance for as-built drawings or vector data formats specifically for the 354th Civil Engineer Squadron
More informationTHE LIST USABILITY PUG 2007
THE LIST USABILITY PUG 2007 Layer/Map Management Working with many layers, maps and data sets Direction that ESRI is taking with the Geodatabase Information Model Direction that ESRI is taking with GIS
More informationSection 4: Ontario Realty Corporation CAD Standards and Guidelines
Section 4: Ontario Realty Corporation CAD Standards and Guidelines Ontario Realty Corporation 11 th Floor, Ferguson Block 77 Wellesley Street West Queen s Park Toronto, ON, M7A 2G3 August 10, 2007 Version
More information3 The New Model. When you have completed this chapter, you will be able to:
3 The New Model We are able to use all the mouse buttons in MicroStation, we know where to find the basic tools, we can create new design files, we can set up working units and specify their readout. These
More informationA Practical Guide to Carlson Software Fundamentals 2015 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner
A Practical Guide to Carlson Software Fundamentals 2015 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner A Cadapult Press Publication Copyright Copyright Cadapult Press, Inc. 2015 All rights reserved. No
More informationNew Sketch Editing/Adding
New Sketch Editing/Adding 1. 2. 3. 4. 5. 6. 1. This button will bring the entire sketch to view in the window, which is the Default display. This is used to return to a view of the entire sketch after
More informationCome Back to the Other Side - AutoCAD for MicroStation Users
11/30/2005-8:00 am - 9:30 am Room:Peacock 2 (Swan) Walt Disney World Swan and Dolphin Resort Orlando, Florida Come Back to the Other Side - AutoCAD for MicroStation Users Mark Mates - ProSoft GD31-2 This
More informationn 4ce Professional Module
n 4ce Fact Sheet n 4ce Professional Module For the discerning user with specialist needs, n 4ce Professional provides extra facilities in Design and 3D presentations. Using the same platform as Lite, extra
More informationNew Features in TerraScan. Version 013.xxx
New Features in TerraScan Terrasolid Workshop ILMF 2013 Denver, CO 14 February 2013 Darrick Wagg GeoCue Corporation 9668 Madison Blvd., Suite 202 Madison, AL 35758 +1 (256) 461-8289 support@geocue.com
More informationHydraulics and Floodplain Modeling Managing HEC-RAS Cross Sections
v. 9.1 WMS 9.1 Tutorial Hydraulics and Floodplain Modeling Managing HEC-RAS Cross Sections Modify cross sections in an HEC-RAS model to use surveyed cross section data Objectives Build a basic HEC-RAS
More informationRelative Coordinates
AutoCAD Essentials Most drawings are created using relative coordinates. This means that the next point is set from the last point drawn. The last point drawn is stored as temporary 0,0". AutoCAD uses
More informationWinField Release 2018 optimized for Windows 10
WinField Release 2018 optimized for Windows 10 The new features at a glance: New DC Corona Noise Spectrum according to DIN Spec 8987 Input of antenna power either as P-, ERP- or EIRP-value New bandpass
More information1. Working with Bathymetry
1. Working with Bathymetry The CMS setup for Shark River Inlet provides a succinct example for illustrating a number of methods and SMS tools that can be applied to most engineering projects. The area
More informationDisplay and Draw Features
CHAPTER 7 Display and Draw Features 7.1 Overview Feature / Function Tool Display or draw DTM features, such as contours, triangles, lattices, voids, islands, etc. DTM Menu Bar Load > DTM Features GEOPAK
More informationHydraulics and Floodplain Modeling Managing HEC-RAS Cross Sections
WMS 10.1 Tutorial Hydraulics and Floodplain Modeling Managing HEC-RAS Cross Sections Modify cross sections in an HEC-RAS model to use surveyed cross section data v. 10.1 Objectives Build a basic HEC-RAS
More informationInput of Precise Geometric Data
Chapter Seven Input of Precise Geometric Data INTRODUCTION PLAY VIDEO A very useful feature of MicroStation V8i for precise technical drawing is key-in of coordinate data. Whenever MicroStation V8i calls
More informationA Practical Guide to Carlson Software Fundamentals 2018 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner
A Practical Guide to Carlson Software Fundamentals 2018 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner A CADapult Press Publication Copyright Copyright CADapult Press, Inc. 2017 All rights reserved. No
More informationAutodesk Raster Design for Mapping and Land Development Professionals David Zavislan, P.E.
December 2-5, 2003 MGM Grand Hotel Las Vegas Autodesk Raster Design for Mapping and Land Development Professionals David Zavislan, P.E. GI12-1 Explore the new and enhanced functionality in Autodesk Raster
More informationUser Guide Autodesk March 2009
User Guide Autodesk March 2009 2009 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method,
More informationverticals products support services training community corporate Saving DGN to DWG (with AutoCAD paperspace and viewport compatibility)
Page 1 of 6 Login Site Map Print Store Search Select Locale Quick Links verticals products support services training community corporate Support Support Tools KnowledgeBase TechNotes and FAQs Remote Support
More informationC. A. D. STANDARDS. Projection. NAD 1983 Rhode Island State Plane US Feet. Scale 1 = 100. Layers. Appendix H - 1
C. A. D. STANDARDS The Authority requires that all CAD drawings be submitted in accordance to the following standards. Using these standards will allow the Authority to efficiently import and attribute
More informationMastering AutoCAD 2D
Course description: Mastering AutoCAD 2D Design and shape the world around you with the powerful, flexible features found in AutoCAD software, one of the world s leading 2D design applications. With robust
More informationChief Architect New Feature List
SYSTEM / PERFORMANCE Chief Architect Premier X4 is available in 64 bit and 32 bit versions. The 64 bit version is more efficient in managing memory and you will see better performance on larger plan files
More informationGIMP WEB 2.0 ICONS. Web 2.0 Icons: Paperclip Completed Project
GIMP WEB 2.0 ICONS WEB 2.0 ICONS: PAPERCLIP OPEN GIMP or Web 2.0 Icons: Paperclip Completed Project Step 1: To begin a new GIMP project, from the Menu Bar, select File New. At the Create a New Image dialog
More informationOpenRoads Best Practice - Civil Cells
OpenRoads Best Practice - Civil Cells Presented by: Ian Rosam, Director Civil Product Management, Bentley Systems, Inc. 1 WWW.BENTLEY.COM 2017 Bentley Systems, Incorporated 2017 Bentley Systems, Incorporated
More informationAutodesk Advance Steel. Drawing Style Manager s guide
Autodesk Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction... 5 Details and Detail Views... 6 Drawing Styles... 6 Drawing Style Manager... 8 Accessing the Drawing Style
More informationStream Design: From GEOPAK to HEC-Ras
10 Stream Design: From GEOPAK to HEC-Ras OBJECTIVES Provide you with a general understanding of GEOPAK Cross Section Reports and their capability to generate geometric information for the HecRas program.
More informationSet your drafting standard and drawing preferences
DRAFTING The Drafting application is designed to allow you to produce and maintain industry standard engineering drawings directly from the 3D model or assembly part. Drawings created in the Drafting application
More informationGeography 281 Map Making with GIS Project Ten: Mapping and Spatial Analysis
Geography 281 Map Making with GIS Project Ten: Mapping and Spatial Analysis This project introduces three techniques that enable you to manipulate the spatial boundaries of geographic features: Clipping
More informationEx Existing Ground Cross Sections
Exercise 13-2 1. Open the MicroStation file: t:\de-proj\randolph\j2p0200\data\pattern_shape_j2p0200.dgn. 2. If not already done, attach t:\de-proj\randolph\j2p0200\data\plan_j2p0200.dgn as a reference
More informationFundamentals of ModelBuilder
Fundamentals of ModelBuilder Agenda An Overview of Geoprocessing Framework Introduction to ModelBuilder Basics of ArcToolbox Using ModelBuilder Documenting Models Sharing Models with Others Q & A Geoprocessing
More informationUser Guide Autodesk March 2010
User Guide Autodesk March 2010 2010 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method,
More informationPrinciples and Applications of Microfluidic Devices AutoCAD Design Lab - COMSOL import ready
Principles and Applications of Microfluidic Devices AutoCAD Design Lab - COMSOL import ready Part I. Introduction AutoCAD is a computer drawing package that can allow you to define physical structures
More informationUser s Manual ❿ Drawings-Detailing
User s Manual ❿ Drawings-Detailing 2 CONTENTS I. THE NEW UPGRADED INTERFACE of SCADA Pro 4 1. UNITS 5 1.1 Drawings-Detailing 5 I. Files 6 II. Drawing 25 III. Formworks 30 IV. Edit 45 V. View 58 VI. Layers
More informationHow to put the Image Services in the Living Atlas to Work in Your GIS. Charlie Frye, Chief Cartographer Esri, Redlands
How to put the Image Services in the Living Atlas to Work in Your GIS Charlie Frye, Chief Cartographer Esri, Redlands Image Services in the Living Atlas of the World Let s have a look: https://livingatlas.arcgis.com
More informationAECOsim Building Designer. Quick Start Guide. Chapter 2 Making the Mass Model Intelligent Bentley Systems, Incorporated.
AECOsim Building Designer Quick Start Guide Chapter 2 Making the Mass Model Intelligent 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Making the Mass Model Intelligent...3
More informationA Practical Guide to Carlson Survey 2014
A Practical Guide to Carlson Survey 2014 Level 1 Rick Ellis A Cadapult Press Publication Copyright Copyright Cadapult Press, Inc. 2014 All rights reserved. No part of this publication may be reproduced
More informationGEOPAK V8i SELECTseries 1, Road 2
GEOPAK V8i SELECTseries 1, Road 2 Ohio Department of Transportation October, 2012 Ohio Department of Transportation GEOPAK Road Training Guide for MicroStation V8i SELECTseries 1, October, 2012 The information
More informationFrom Raster to Vector: Make That Scanner Earn Its Keep!
December 2-5, 2003 MGM Grand Hotel Las Vegas From Raster to Vector: Make That Scanner Earn Its Keep! Felicia Provencal GD31-2 This class is an in-depth introduction to Autodesk Raster Design, formerly
More informationAdvance Concrete 2014 Service Pack 1
Advance Concrete 2014 Service Pack 1 This document describes the improvements in Service Pack 1 for Advance Concrete 2014. GENERAL Interaction between Advance Concrete and Advance Steel. Advance Steel
More informationARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command.
DFTG 1309 Final Review Notes I. Draw commands: LINE (draws a series of lines) Valid input: Pick button Cartesian coordinates Absolute (2,3) Relative rectangular (@2,3) Relative polar (@ 2
More informationSPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS
SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS Course Number: ARBT 125 Department: Architecture and Building Technology Course Title: Architectural CAD I Semester: Fall Year: 2013 Objectives/
More informationMiami University. Physical Facilities Department. CAD Standards. April 2004
Miami University Physical Facilities Department CAD Standards April 2004 1.0.0 OVERVIEW These standards pertain to the use, production and submittal of electronic CAD files at Miami University. They have
More informationThe Microstation configuration must be set up with the correct CAD resource files as outlined in SPEC
1/7 1.0 PURPOSE This specification describes the procedure for working with the Vale Drawing Checker Utility. This utility checks the drawing for adherence to many mandatory Vale drawing standards and
More informationImport/Export of tendons in module StatiCa Tendon
IDEA Tutorial Import/Export of tendons in module StatiCa Tendon by using formats DXF, TXT and table format Import/Export of tendons in module StatiCa Tendon 1 Contents 1. Terminology... 2 2. Import...
More informationCAD for Maintenance Engineers
Unit 32: Unit code CAD for Maintenance Engineers F/615/1501 Unit level 4 Credit value 15 Introduction There is a growing trend, in part due to the popularity of three-dimensional (3D) Computer Aided Design
More informationAnalysis & Geoprocessing: Case Studies Problem Solving
Analysis & Geoprocessing: Case Studies Problem Solving Shawn Marie Simpson Federal User Conference 2008 3 Overview Analysis & Geoprocessing Review What is it? How can I use it to answer questions? Case
More informationSolid Essential. Quote-IT
VIEWS Order Entry Assembly, 3D, Bird's Eye Zoom In, Zoom Out & Pan With Scroll Wheel Floor Plans. Elevations, Molding, Counter Top, Render Lighting & Textures Photovision - Photorealistic Rendering Drawings
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS MICROSTATION W/LAB CID 1200
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS MICROSTATION W/LAB CID 1200 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Date Revised: Spring 99 NOTE: This course is not designed
More informationMicroStation XM Training Manual 2D Level 2
You are viewing sample pages from our textbook: MicroStation XM Training Manual 2D Level 2 The full content of Module 9 is shown below, which discusses the generation of Complex Elements. The instruction
More informationGeomatica I Course Guide Version 10.1
Geomatica I Course Guide Version 10.1 Geomatica Version 10.1 2007 PCI Geomatics Enterprises Inc.. All rights reserved. COPYRIGHT NOTICE Software copyrighted by PCI Geomatics, 50 West Wilmot St., Suite
More informationSubsurface Utility Engineering and 3D Utility Mapping
Subsurface Utility Engineering and 3D Utility Mapping Subsurface Utility Engineering: A branch of engineering practice that involves managing certain risks associated with utility mapping and appropriate
More informationAdvance Steel. Drawing Style Manager s guide
Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction...7 Details and Detail Views...8 Drawing Styles...8 Drawing Style Manager...9 Accessing the Drawing Style Manager...9
More informationFeatures and Benefits
AutoCAD Raster Design 2010 Features and Benefits Make the most of rasterized scanned drawings, maps, aerial photos, satellite imagery, and digital elevation models. Get more out of your raster data and
More informationAutodesk Raster Design for Mapping and Land Development Professionals
11/28/2005-8:00 am - 9:30 am Room:Pelican 2 (Swan) Walt Disney World Swan and Dolphin Resort Orlando, Florida Autodesk Raster Design for Mapping and Land Development Professionals David Zavislan - Nolte
More informationVersion 8 Tutorial
Version 8 Tutorial 800-989-4243 214-340-9436 support@vertigraph.com www.vertigraph.com 1 Table of Contents A. Overview... 4 B. About the SiteWorx/OS Window... 4 C. File Types Raster, Vector and PDF...
More informationThis specification describes the minimum technical requirements for drawings, as applicable to all disciplines.
SPEC-0800 1/5 1.0 PURPOSE This specification describes the minimum technical requirements for drawings, as applicable to all disciplines. 2.0 VALE DRAWING TYPE DEFINITIONS Engineering Drawings Engineering
More informationRelease Highlights for BluePrint-PCB Product Version 2.0.1
Release Highlights for BluePrint-PCB Product Version 2.0.1 Introduction BluePrint Version 2.0.1 is a rolling release for BluePrint V2.0. BluePrint rolling releases are delivered as needed and allow us
More informationGroup of Experts on Protected Areas and Ecological Networks 9th meeting 4-5 October 2018
Strasbourg, 27 September 2018 T-PVS/PA (2018) 14 [pa14e_2018.doc] CONVENTION ON THE CONSERVATION OF EUROPEAN WILDLIFE AND NATURAL HABITATS Group of Experts on Protected Areas and Ecological Networks 9th
More informationCreate styles that control the display of Civil 3D objects. Copy styles from one drawing to another drawing.
NOTES Module 03 Settings and Styles In this module, you learn about the various settings and styles that are used in AutoCAD Civil 3D. A strong understanding of these basics leads to more efficient use
More informationModule 10. Assemblies and Corridors. Objectives
NOTES Module 10 Assemblies and Corridors In this module, you learn to work with assemblies and corridors in AutoCAD Civil 3D. Corridor models are used to represent road designs in Civil 3D. An assembly
More informationModule 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated)
Inventor (5) Module 2: 2-1 Module 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated) In this tutorial, we will learn how to build a 3D model
More informationAutoCAD 2D. Table of Contents. Lesson 1 Getting Started
AutoCAD 2D Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard
More information4) Click on Load Point Cloud to load the.czp file from Scene. Open Intersection_Demo.czp
Intersection 2D Demo 1) Open the Crash Zone or Crime Zone diagram program. 2) Click on to open the CZ Point Cloud tool. 3) Click on 3D/Cloud Preferences. a) Set the Cloud File Units (Feet or Meters). b)
More informationTable of contents. User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7
Table of contents WELCOME TO ADVANCE CONCRETE 2014... 5 USER INTERFACE ENHANCEMENTS... 6 User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7 MODELING... 10
More informationDrawing and Assembling
Youth Explore Trades Skills Description In this activity the six sides of a die will be drawn and then assembled together. The intent is to understand how constraints are used to lock individual parts
More informationConstructions. Learning Intention: By If you use 1 litre of orange, you will use 4 litres of water (1:4).
Constructions Scales Scales are important in everyday life. We use scales to draw maps, to construct building plans, in housing, street construction... It is impossible to draw building plans with the
More information06/17/02 Page 1 of 12
Understanding the Graphical User Interface When you start AutoCAD, the AutoCAD window opens. The window is your design work space. It contains elements that you use to create your designs and to receive
More informationUNIGIS University of Salzburg. Module: ArcGIS for Server Lesson: Online Spatial analysis UNIGIS
1 Upon the completion of this presentation you should be able to: Describe the geoprocessing service capabilities Define supported data types input and output of geoprocessing service Configure a geoprocessing
More informationDownloading Imagery & LIDAR
Downloading Imagery & LIDAR 333 Earth Explorer The USGS is a great source for downloading many different GIS data products for the entire US and Canada and much of the world. Below are instructions for
More informationHistoric Wildfire Research in Southeastern Idaho. Fredrik Thoren, Daniel Mattsson,
Historic Wildfire Research in Southeastern Idaho Fredrik Thoren, kiruna_thoren@hotmail.com Daniel Mattsson, phillou1@hotmail.com Abstract: The goal of this project was to create and analyze wildfire areas
More informationRevit Structure 2012 Basics:
SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural
More informationFundamentals III PROJECT EXERCISE
4 Fundamentals III PROJECT EXERCISE This project exercise provides point-by-point instructions for setting up the drawing with layers and then creating the objects shown in Figure P4 1. project EXERCISE
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ADVANCED MECHANICAL DRAWING CID 1220
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ADVANCED MECHANICAL DRAWING CID 1220 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Date Revised: Fall 00 NOTE: This course is not
More informationA Web Application That Can Save You Money
Esri Southwest Conference December 2-4, 2014 Santa Fe, NM A Web Application That Can Save You Money Colleen Swain, Swain GIS Services, LLC Brian Zheng, East Bay Municipal Utility District Problem Background
More informationThe drawing numbering system applies to all drawings produced for Vale that are archived in the Drawing Management System.
SPEC-0002 2016/0/26 1/15 1.0 PURPOSE This specification describes the administrative drawing requirements such as numbering, titles, and border information, etc. for Engineering Drawings produced for Vale.
More informationState of Florida Department of Transportation. FDOT Traffic Plans. Signing & Pavement Markings (CE ) Signalization (CE ) Lighting
State of Florida Department of Transportation FDOT Traffic Plans Signing & Pavement Markings (CE-11-0117) Signalization (CE-11-0119) Lighting (CE-11-0118) User Training Manual October 2017 PRODUCTION SUPPORT
More informationTips and Tricks. Matt Kolberg, Technology Consultant. Consulting Training Software
Tips and Tricks Matt Kolberg, Technology Consultant Consulting Training Software Civil 3D Session Description This 60-minute session will reveal those hidden gems and other undocumented functionality in
More informationSymbols and Standards (Architectural CAD)
Design and Drafting Description In this activity the teacher will give an orientation to the symbols and conventions of Architectural CAD. Industry common symbols are used for most of the fixtures and
More informationExpert Raster Editing - Reusing and Updating Your Existing Paper Documents
11/28/2005-1:00 pm - 2:30 pm Room:N. Hemispheres (Salon E1) (Dolphin) Walt Disney World Swan and Dolphin Resort Orlando, Florida Expert Raster Editing - Reusing and Updating Your Existing Paper Documents
More informationDevelopment of Mosaic Datasets and Image Services for Bathymetric Data
Development of Mosaic Datasets and Image Services for Bathymetric Data Jesse Varner Cooperative Institute for Research in Environmental Sciences (CIRES), University of Colorado John Cartwright NOAA National
More informationEASY CNC. Table of Contents
Square 1 Electronics announces its new book by David Benson, "Easy CNC", A Beginner's Guide to CNC" The complete table of contents follows: This book was written by David Benson (8-1/2 x 11", 200 pages,
More informationAn Introduction to Dimensioning Dimension Elements-
An Introduction to Dimensioning A precise drawing plotted to scale often does not convey enough information for builders to construct your design. Usually you add annotation showing object measurements
More informationShades of Green. Using gcadplus for landscape design. Keith West, Sylvie Bion & Annette Tiemersma. gcad
Shades of Green 50 Using gcadplus for landscape design Keith West, Sylvie Bion & Annette Tiemersma gcad + About the authors: Keith West is the founder of Design Cad, a software developer company based
More informationDeltaCad and Your Horizontal Altitude Sundial Carl Sabanski
1 The Sundial Primer created by In the instruction set SONNE and Your Horizontal Altitude Sundial we went through the process of designing a horizontal altitude sundial with SONNE and saving it as a dxf
More information