120 Ohms Digital Distribution Frame Solution
|
|
|
- Neil Taylor
- 5 years ago
- Views:
Transcription
1
2 120 Ohms Digital Distribution Frame Solution 120Ohm Digital Distribution Frame is designed for 120Ohms twisted pair cable termination and cross connection in between transmission equipments in fixed or mobile network with proper cable management. Litech offers full range of 120 Ohms DDF solutions for cross connection requirement in exchanges, MSC, BSC or RBS, such as free standing frames, wall mount frames, rack mount frames as well as enclosed DDF for shared equipment rooms. Litech also offers complete accessories for use with the systems for surge protection, labeling, jumpering as well as other installation accessories. Easy Installation 120 Ohm termination block features punch down IDC design which made termination work much easier and faster compare to 75Ohm coaxial DDF. Label for Identification Frame label holder and flappable module labels are available for proper identification application. High stability and reliability DDF modules utilized 45º angle IDC contact with provides more reliable and stressresistance connection with high stability. The contact elements are silver plated to provide optimum electrical conductivity. Excellent Cable Management Litech 120 Ohm DDF Solutions are equipped with proper cable management holder and cable guide, to management both vertical cables as well as cross connect jumpers.
3 Disconnection Module LTZF-CL2-8A-PBT LTZF-CL2-10A-PBT 8 Pair Disconnection Module 10 Pair Disconnection Module 10 Pair 8 Pair Surge Arrestor LTZF-CL1-10A-PBT LTZF-CL1-S1-AAR 10 Pair Magazine Module Single Line Arrestor Magazine Arrestor Single Line Arrestor Tool & Accessories Label Holder For Frame Label Holder For Module Insulation Plug Testcord Insertion Tool Free Standing Frame LTZF-LBL-FRM-01-8 LTZF-LBL-MDL-02-8 LTZF-LBL-FRM LTZF-LBL-MDL LTZF-INS-10B-01 LTZF-INS-1PP-01 LTZF-10PR-TL-KR LTZF-TES-2P-120 LTZF-TES-4P-120 Label Holder for 8 Pair Frame Label Holder for 8 Pair Module Label Holder for 10 Pair Frame Label Holder for 10 Pair Module 10 Pair Insulation Plug 1 Pair Insulation Plug Litech Krone Insertion Testcord 2 Pole Testcord 4 Pole LTZF-FSF-60 LTZF-FSF-1200 LTZF-FSF-2400 LTZF-FSF-60-8P LTZF-FSF P LTZF-FSF P Free Standing Frame For 60 Module Free Standing Frame For 120 Module Free Standing Frame For 240 Module 8 Pair Free Standing Frame For 60 Module 8 Pair Free Standing Frame For 120 Module 8 Pair Free Standing Frame For 240 Module 120 Module 60 Module
4 Wall Mount Box LTZF-PBX-60 Wall Mount ABS Box For up to 6 Module 60 Pair 60 Pair LTZF-PBX-100 Wall Mount ABS Box For up to 10 Module LTZF-PBX-200 Wall Mount ABS Box For up to 20 Module LTZF-MBX-60 Wall Mount Metal Box For up to 6 Module LTZF-MBX-100 Wall Mount Metal Box For up to 10 Module LTZF-MBX-200 Wall Mount Metal Box For up to 20 Module 100 Pair 100 Pair Back Mount Frame Frame with cable management guide for 20 module. Frame with cable management guide for 30 module. Frame with cable management guide for 40 module. Double Frame with cable management guide for 40 module. Double Frame with cable management guide for 60 module. Double Frame with cable management guide for 80 module. Rack Mount Frame 4E1 8E1 LTZF-RMF-4E1 LTZF-RMF-8E1 19" Rack Mount Frame - 4E1 19" Rack Mount Frame - 8E1 LTZF-RMF-16E1 19" Rack Mount Frame - 16E1 LTZF-RMF-32E1 19" Rack Mount Frame - 32E1 32E1
5 120 ohm Cables 2 Pair Screened 4 Pair Screened 8 Pair Screened 8 Pair Shielded 16 Pair Screened LTSS-FT LTSS-FT LTSS-FT LTSS-FT LTSS-FT LTSS-SFT LTSS-SFT LTSS-SFT LTSS-SFT Pair Jumper Cable, Screened, 120 Ohm Balanced 4 Pair Jumper Cable, Screened, 120 Ohm Balanced 8 Pair Jumper Cable, Screened, 120 Ohm Balanced 16 Pair Jumper Cable, Screened, 120 Ohm Balanced 32 Pair Jumper Cable, Screened, 120 Ohm Balanced 4 Pair Shielded Cable, 120 Ohm Balanced 8 Pair Shielded Cable, 120 Ohm Balanced 16 Pair Shielded Cable, 120 Ohm Balanced 32 Pair Shielded Cable, 120 Ohm Balanced 75 Ohm to 120 Ohm Balun 75 Ohms link is made possible by using 75Ohm to 120 Ohm balun. Balun is a media converter for 2Mbit link which allowed a unbalanced 75Ohm coaxial interface equipment to operate over balanced 120Ohm twisted pair cables, or visa versa. Litech offers 1.6/5.6 balun, BNC or HDC balun to allowed connection to 75 ohm equipment, offering flexibility in different impedance equipment to be used. IDC Balun 1.6/5.6 Straight Male BNC Straight Male LTBL-IDC-1SM-3P Coaxial Balun 1.6/5.6 Straight Male to IDC 3 Pole LTBL-IDC-1SF-3P Coaxial Balun 1.6/5.6 Straight Female to IDC 3 Pole LTBL-IDC-3SF-3P Coaxial Balun BNC Straight Female to IDC 3 Pole LTBL-IDC-3SM-3P Coaxial Balun BNC6 Straight Male to IDC 3 Pole 1.6/5.6 Straight Female BNC Straight Female Wire Wrap Balun BT43 Straight Male BNC Straight Female LTBL-IDC-4SM-W2P Coaxial Balun BT43 Straight Male to Wire Wrap LTBL-IDC-1SF-W2P Coaxial Balun BT43 Straight Female to Wire Wrap LTBL-IDC-3SF-W2P Coaxial Balun BNC Straight Female to Wire Wrap LTBL-IDC-3SM-W2P Coaxial Balun BNC Straight Male to Wire Wrap BT43 Straight Female BNC Straight Male
6 75/120 Ohm BNC to RJ45 Balun Coaxial Balun Pigtail LTBL-PGT2-3SM-45F LTBL-IDC-1SF-3P LTBL-IDC-3SF-3P Coaxial Balun Pigtail Double BNC Male to RJ45 Coaxial Balun Box Double BNC Female to RJ45 Coaxial Balun Box BNC Male to RJ45 Double BNC Female to RJ45 BNC Male to RJ45 Balun Panel LTBL-PN16-1F-45F (FA) 19" 16 Port BNC Female To RJ45 (Front Access) 32 Port BNC to RJ45 (FA) 32 Port 1.6/5.6 to RJ45 (FA) LTBL-PN32-1F-45F (FA) LTBL-PN16-3F-45F (FA) LTBL-PN32-3F-45F (FA) 19" 32 Port BNC Female To RJ45 (Front Access) 19" 16 Port 1.6/5.6 Female To RJ45 (Front Access) 19" 32 Port 1.6/5.6 Female To RJ45 (Front Access) LTBL-PN16-3F-45F(FR) 19" 16 Port 1.6/5.6 Female (Back) to RJ45 (Front Access) LTBL-PN32-3F-45F(FR) 19" 32 Port 1.6/5.6 Female (Back) to RJ45 (Front Access) LTBL-PN16-1F-45F(FR) 19" 16 Port BNC Female (Back) to RJ45 (Front Access) LTBL-PN32-1F-45F(FR) 19" 32 Port BNC Female (Back) to RJ45 (Front Access) 32 Port 1.5/5.6 to RJ45 (FR) 32 Port BNC to RJ45 (FR)
7 U L E SIRIM Approved! ISO 9001 :
High Density DDF Solution
High Density DDF Solution Digital Distribution Frame 75 Ohm Digital Distribution Frame is designed for coaxial cable termination and cross connection in between transmission equipments in fixed or mobile
Balun Ohm to 120 Ohm Balin - IDC Type Balun - Balun Panels - Balun Pigtail
Balun - 75 Ohm to 120 Ohm Balin - IDC Type Balun - Balun Panels - Balun Pigtail Content - 75 Ohm to 120 Ohm Balin - IDC Type Balun - Balun Panels - Balun Pigtail 1.1 75ohm to 120ohm Balun Solutions 1.2
Introduction. 75 /120 OHM IDC Balun. 75 /120 Ohm IDC Mini Balun. 75 /120 Ohm Wire Wrap Balun. 75 /120 Ohm BNC to RJ45 Balun. 75 /120 Ohm Balun Panel
BalunSolutions Content Introduction 1-2 75 /120 OHM IDC Balun 3 75 /120 Ohm IDC Mini Balun 4 75 /120 Ohm Wire Wrap Balun 5 75 /120 Ohm BNC to RJ45 Balun 6 75 /120 Ohm Balun Panel 7 75 /120 Ohm Wire Wrap
Content. - DDF Frame Pair Screen Cable Pair Screen Cable
Content - 120 1.1 Ohm 120ohm DDF DDF Accessories Cables 1.1.1 2 Pair Screen Cable - DDF Frame 1.1.2 4 Pair Screen Cable - 120 Ohm 1.1.3 DDF 8 Pair Cable Screen Cable 1.1.4 16 Pair Screen Cable 1.1.5 50
CATALOG. Network Access & Connectivity
Baluns convert the G.703 interface from unbalanced 75-ohm to balanced -ohm terminations. Patton s baluns use dual BNC connectors (Models 460 and 464) or dual 1.6/5.6 coax connectors (Models 465 and 466)
baluns Balun solutions TX RX defining excellence in global network solutions
baluns TX RX Balun solutions www.greenwoodscomms.com defining excellence in global network solutions Baluns IDC IDC Baluns A range of IDC baluns used to convert between balanced and unbalanced electrical
CCITT G.703 Baluns HC-GB- MB8S. Shielded RJ45 Jack to Male BNC Connector. STANDARD TYPE Ordering Information
CCITT G.703 Baluns REGULAR TYPE The standard single baluns come with a variety of coaxial interfaces and a RJ45 twisted pair connection. MB8S Shielded RJ45 Jack to Male BNC STANDARD TYPE M5D8S Shielded
MONITOR BRACKETS CCTV SYSTEMS. BT7510S Ex GST Inc GST. BT7511S Ex GST Inc GST. BT7512S Ex GST Inc GST. BT7518S Ex GST Inc GST. BT7513S Ex GST Inc GST
MONITOR BRACKETS BT7510S Small Flat Screen Bracket 20kg For small flat screen. Mounts screen only 20mm from wall. Security Allen Key provided Accommodates up to 20kg BT7511S Small Flat Screen Tilt Bracket
G & H Telecoms Ltd Product Guide 2017
G & H Telecoms Ltd Product Guide 2017 TEL: 02476 645882 1 2. Index 65. Coaxial Tooling 66. Pressmaster Pliers 6A & Die Sets 3. Coaxial Connectors 67. Inner Crimp Tools MH800 & AFM8 4. BT43 (SMZ Range)
AESA TECHNOLOGY OF LAN CABLE
TECHNOLOGY OF LAN CABLE CONTENT CHAPTER INTRODUCTION CHAPTER LOCAL AREA NETWORK (LAN) CHAPTER STRUCTURED CABLING SYSTEM (SCS) CHAPTER OPTICAL FIBER CABLE CHAPTER STANDARD CHAPTER COPPER LAN CABLE DESIGN
Since its inception, AC&E has specialised in the development and manufacture of products such as:
The aim of this catalogue is to show the range of high quality baluns and balun solutions available from AC&E. We trust that you will find this booklet helpful in sourcing the products you require. Founded
Product Classification. Mechanical Specifications. Dimensions. Regulatory Compliance/Certifications. Included Products
ATBTK-FM Bias Tee Kit, AISG Compatible 698-2170 MHz Product Classification Product Type RET bias tee Mechanical Specifications Antenna Interface BTS Interface 7-16 DIN Male 7-16 DIN Female Dimensions Depth
Labs. Introduction. Specialty Family
INC. Labs Introduction Specialty Family Features K-Jumper: Affordable, High Performance Interconnect up to 35 GHz Space-Flex : Semi-Rigid and Flexible Cable Assemblies for S-Level Space T-Flex : Flexible
SRICOM SRINAR COMMUNICATIONS PVT. LTD.
B A L U N SRICOM & D D F A S S E M B LY SRINAR COMMUNICATIONS PVT. LTD. S R I N A R C O M M U N I C A T I O N S P V T. L T D, called SRICOM in short, is located at Chennai in the southern part of India.
ATBTK-MF-4G. Product Classification. Mechanical Specifications. Dimensions. Regulatory Compliance/Certifications.
ATBTK-MF-4G Bias Tee Kit, AISG Compatible 698-2700 MHz Product Classification Product Type RET bias tee Mechanical Specifications Antenna Interface 7-16 DIN Female BTS Interface 7-16 DIN Male Dimensions
10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cableto-board and cable-to-cable applications with protection up to IP65 / IP67. At the same time, applications up to 2.5
Connectors for Telecommunications
Connectors for Telecommunications BNC Connectors H-CN03-123x H-CN03-223X H-CN03-121x H-CN03-113x H-CN03-125x H-CN03-225x Straight Crimp plugs - BNC Straight crimp sockets - BNC Straight solder plugs -
Labs. Introduction. Specialty Family
INC. Labs Introduction Specialty Family Features K-Jumper: Affordable, High Performance Interconnect up to 35 GHz Sta-Put: Zero Loading Test Cable Space-Flex : Semi-Rigid and Flexible Cable Assemblies
SEL Radio Accessories Guide
SEL Radio Accessories Guide Features and Benefits SEL-3031 Serial Radio Transceiver Figure 1 SEL-3031 Wall-Mount Figure 2 SEL-3031 Rack-Mount Uses low-latency data communication for high-speed teleprotection.
SMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack
SMB Connectors Adaptors-50Ω Plug to Plug 1P-801-00 Jack to Jack 1P-802-00 Plug to Jack 1P-803-00 Bulkhead Jack to Jack 1P-804-18 Mini-SMB 75Ω Straight Plug 1P75-111-00 Cable group RG316 Straight PCB Jack
Workstation Outlets GigaFlex PS6+ Modules Category 6
C O M M E R C I A L N E T W O R K I N G C O P P E R 15.25 GigaFlex PS6+ Modules Category 6 AX101067 GigaFlex PS6+Module GigaFlex PS6+ Module The GigaFlex PS6+ Module is a punch down UTP connector based
SEL Radio Accessories Guide
SEL Radio Accessories Guide Features and Benefits SEL-3031 Serial Radio Transceiver Figure 1 SEL-3031 Wall-Mount Figure 2 SEL-3031 Rack-Mount Uses low-latency data communication for high-speed teleprotection.
Coupling- / Decoupling Network. 150 khz 300 MHz. 150 khz 230 MHz. 10 khz 230 MHz. IEC and CISPR 15 / CISPR 22 IEC
Coupling- / Decoupling Network 150 khz 300 MHz IEC 61000-4 - 6 and CISPR 15 / CISPR 22 150 khz 230 MHz IEC 61000-4 - 6 10 khz 230 MHz IEC 61000-4 - 6 and IEC 61326-3 - 2 and NE-21 Coupling and decoupling
G.703 Balun Module Panel Unit G.703 Balun Module G.703 Balun Chassis
JUNE 1998 MT243A MT243C-F RM243A G.703 Balun Module Panel Unit G.703 Balun Module G.703 Balun Chassis CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday:
STANDARD COAXIAL CONNECTORS. Eco 7/16 series
STANDARD COAXIAL CONNECTORS Eco 7/16 series Eco 7/16 INTRODUCTION GENERAL Standard coaxial connectors Screw on coupling Compliant to CECC and IEC standards 50 Ω APPLICATIONS Broadcast RF components (filters,
Video Mono Audio Baluns
FEBRUARY 1998 IC443A Video Mono Audio Baluns Video Mono Audio Balun AUDIO 1 PAIR 1 (4 & 5) VIDEO 1 PAIR 4 (7 & 8) AUDIO 2 PAIR 2 (3 & 6) VIDEO 2 PAIR 3 (1 & 2) CUSTOMER SUPPORT INFORMATION Order toll-free
Video Stereo Audio Baluns
FEBRUARY 1998 IC441A Video Stereo Audio Baluns Video Stereo Audio Balun VIDEO PAIR 4 (7 & 8) AUDIO(L) PAIR 2 (3 & 6) AUDIO(R) PAIR 3 (1 & 2) CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24
ST-CCTV-VBAC8 8-Channel Active UTP Video Receiver
INSTALLATION MANUAL 8-Channel Active UTP Video Receiver Copyright North American Cable Equipment, Inc. 1 PACKAGE CONTENTS This package contains: One 8-channel active UTP video receiver One AC power cord
C240-NFSM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C240-NFSM-3M Product Classification Brand Product Series Product Type CNT Jumper with interface types N Female and SMA Male, 3m CNT Braided cable assembly General Specifications Body Style, Connector A
ST-CCTV-VBAC16 16-Channel Active UTP Video Receiver
INSTALLATION MANUAL ST-CCTV-VBAC16 16-Channel Active UTP Video Receiver Copyright North American Cable Equipment, Inc. 1 PACKAGE CONTENTS This package contains: One ST-CCTV-VBAC16 16-channel active UTP
10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
What you should have. 1. Telescopic Pole (1) 2. Arc tubing (4) for Lower Ring. 3. Numbered bars or spokes(8) 4. Center plate (1)
20 ft RGB Pole Tree What you should have 1. Telescopic Pole (1) 2. Arc tubing (4) for Lower Ring 3. Numbered bars or spokes(8) 4. Center plate (1) 5. Top Ring (1) 6. Hardware and wrenchs a. Hardware i.
Current Probe. Quick Start Guide. What is in the box What does it do How to build a setup Help and troubleshooting...
Current Probe Quick Start Guide What is in the box... 2 What does it do... 4 How to build a setup... 5 Help and troubleshooting... 8 Technical specifications... 9 2015 Current Probe 1 - QSG 1.0 1 / 12
Microwave Cable Products
Microwave Cable Products MaxGain Features & Benefits: Lowest Insertion Loss Available, DC-50 GHz Ultra Stable Insertion Loss, Phase and VSWR with Flexing Flex Durability Very Good Excellent Phase Tracking
DeviceNet Series. Cables Cordset Accessories Receptacles Receptacle Accessories Junction Blocks
Series Cables... - Cordset Accessories... - Receptacles... 6-9 Receptacle Accessories. 0- Junction Blocks... -6 L- Mencom Corporation MencomConnectors.com TEL: 770--8 Ph: 800-966- www.mencom.com Series
Data sheet E-DAT modul 2 port AP Cat.6 A, pearl white
Illustrations Dimensional drawing Wiring Page 1/7 See enlarged drawings at the end of document Product specification surface-mounted termination unit with E-DAT modul component testing for Cat.6 A to ISO/IEC
Series IV Pro-Connect Baluns. Set-Up Guide
Series IV Pro-Connect Baluns PCBKDCOVAAB, PCBKDCOVDAB, PCBKDCOVIRB, PCBKDCOVSAB Set-Up Guide PCBKDCOVAAB PCBKDCOVIRB PCBKDCOVDAB PCBKDCOVSAB Key Digital Pro-Connect Series Baluns; PCBKDCOVAAB Component
DC MHZ PXI Differential Instrumentation Amplifier
DC - 100 MHZ PXI Differential Instrumentation Amplifier Differential 100 V Common Mode Input DC - 100 MHz Bandwidth AC/DC Coupling Programmable Attenuation/Gain/ Offset 9 nv/ Input Noise 50 Ω Output Impedance
The Low-Noise, Integrated Transformer Helium-4 Dipstick Insert
The Low-Noise, Integrated Transformer Helium-4 Dipstick Insert Sang Lin Chu Georgia Institute Of Technology 837 State Street N.W. Atlanta, GA 30332 gte813m@prism.gatech.edu, sanglinchu@hotmail.com December
4 Channel Security Hubs
4 Channel Security Hubs Operating Instructions KD-4PUV Four Channel Passive Transceiver KD-4AUVRX Four Channel Active Receiver KD-4AUVRX & KD-4PUV are multi-channel video hubs that allow for the transmission
LSA-PLUS insertion Tool S. Exclusive CD edition March 2006
LSA-PLUS insertion Tool S Exclusive CD edition March 2006 LSA-PLUS Insertion Tool S The standard tool for all data, information technology and telecommunication wiring. Can be used for all LSA-PLUS series,
Data sheet C5 RJ45 field plug pro 2P PROFINET
Illustrations Dimensional drawing Page 1/5 See enlarged drawings at the end of document Product specification Cat.5 class D RJ45 plug, 2 pairs, to be assembled in the field fully shielded and multi-port
C400-TMTM-30-X. Jumper Assembly Sample Label. Product Classification. General Specifications. Electrical Specifications
C400-TMTM-30-X Product Classification Brand Product Series Product Type CNT-400-FR CNT Jumper with interface types TNC Male and TNC Male, 9.14 m CNT CNT-400 Braided cable assembly General Specifications
ATSBT-BOTTOM-FM-4G. Electrical Specifications. Product Classification. General Specifications. Mechanical Specifications. Bottom Smart Bias Tee
Electrical Specifications EU Certification Bottom Smart Bias Tee Injects AISG power and control signals onto a coaxial cable line Reduces cable and site lease costs by eliminating the need for AISG home
Electrical Components Catalog RF Connectors
Introduction Product Facts Designed and Manufactured to meet MI-C-39012 Requirements Wide Range of Connectors available in 50 and 75 Ohm Impedance The range offers connectors to suit from DC-11 GHz Operation
Dielectric Material. Cable Type
UTP Video Cables West Penn Wire/CDT introduces its new line of UTP security cables,v/cat. The V/CAT ( Video over Category 5E) is designed for the video over UTP applications. The cables are constructed
This specification describes termination procedures of AMP Netconnect Cat.6 Compact Patch Panel 0.5U:
Application 4-9300 Specification Nov 06 Rev.C AMP Netconnect* Cat.6 Compact Patch Panel 0.5U, 4 Ports. SCOPE This specification describes termination procedures of AMP Netconnect Cat.6 Compact Patch Panel
Data sheet. E-DAT modul 3 port AP Cat.6A, pure white. Illustrations P/N E EAN Product specification. Page 1/
Page 1/7 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification surface-mounted termination unit with E-DAT modul component testing for Cat.6A to ISO/IEC
Product Manual QD1010-USB. Description. Contents. Material List. Setup. General Use. USB Cable Use. USB to RS485 Communications Converter
Product Manual QD00-US US to Communications Converter Description The QD00-US is a US to converter used to allow asys Controls controllers to communicate with a PC. Material List QD00-US communication
Singing Christmas Tree Family
Singing Christmas Tree Family An Installation Guide Updated 8/6/14 Unpack the contents from the boxes. Ensure that you have all of the items that you ordered. The Singing Tree Family products should come
Active UTP Transceiver Hub Installation Guide
Active UTP Transceiver Hub Installation Guide Models Include: HubWayLDH8 HubWayLDH16 - UL Listed eight (8) Channels - UL Listed sixteen (16) Channels Rev. 032108 More than just power. TM Overview: Altronix
INDEX Unflanged Elbows 7/8 Male - Male...2 1+5/8 Male - Male...3 1+5/8 Male - Female...4 1+5/8 Female - Female...5 3+1/8 Male - Male...6 Flanged Elbows 7/8...8 1+5/8...9 3+1/8...10 Coaxial Adaptors 7/8
BNC-Panel-32-Input User Manual
BNC-Panel-32-Input User Manual Used to mate any input signals on BNC Connectors to a Digital Lynx AC or DC Input Board. Neuralynx, Inc. 105 Commercial Drive, Bozeman, MT 59715 Phone 406.585.4542 Fax 866.585.1743
Model AAA-1C. Addendum to AAA-1B documentation
Model AAA-1C. Addendum to AAA-1B documentation 1. Specifications for Model AAA-1C (11) General Output impedance Power supply (1) Maximal output voltage (10) Physical size 50 Ohms, BNC connector on control
Through and Ground Conductor Terminal Blocks 290 Series
11 474 Through and Ground Conductor Terminal Blocks 290 Series 0.34-1. mm"f-st" 0.31-1 mm"s" 1 00 V/6 kv/3 2 1 AWG 22-16"f-st" AWG 22-18"s" I N 13. A Terminal block width mm / 0.197 in 0.34-1. mm"f-st"
Category 7 A /Class F A Products
CATEGORY 7 A /CLASS F A PRODUCTS Category 7 A /Class F A Products Exceeding ISO/IEC category 7 A /class F A specifications, Siemonʼs fully shielded TERA endto-end cabling solution is the highest-performing,
C195-SMQM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C195-SMQM-3M Product Classification Brand Product Series Product Type CNT-195 CNT Jumper with interface types SMA Male and QMA Male, 3M CNT CNT-195 Braided cable assembly General Specifications Body Style,
110 Z INRX Line-Receiver Input Impedance RX Zin jumper set to 75 ohm
DEMO CIRCUIT 815 QUICK START GUIDE 3.3V Single Supply Video Difference Amplifier DESCRIPTION Demonstration circuit 815 is a Video Line-Driver & Receiver featuring the. The driver and receiver sections
PREMISE CONNECTIVITY SYSTEMS
PREMISE CONNECTIVITY TM Keystone Work Area Outlet Systems Category 6+ Keystone Jacks Category 5e+ Keystone Jacks Category 3 Voice Grade Keystone Jacks Keystone Jack Accessories A Multimedia Connector Modules
Welcome to TESLA Jihlava
HYPCON CONTACTS Welcome to TESLA Jihlava Praha D1 Rozvadov (Műnchen) Jihlava Znojmo (Wien) Brno COMPANY PROFILE TESLA Jihlava, a.s. - a joint-stock company - is one of the largest Czech manufacturers of
CTP2000 4W&EM Interface Module
CTP2000 4W&EM Interface Module The CTP2000 Series 4W&EM interface module has eight 4-wire E&M ports and provides support for voice applications. It is used with voice compression (VCOMP) bundles in CTP2000
SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188 Gold Plated
SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188 Gold Plated RF Connectors Technical Data Sheet PE45145 Configuration SMA Male Connector 50 Ohms Straight Body Geometry RG174, RG316, RG188
Recommended clamp spacing for 1/4 coaxial cable
3.7.6.1 Recommended clamp spacing for 1/4 coaxial cable lamp spacing recommendation is based on the guidelines stated in EI Standard RS-222 (Structural Standards for Steel ntenna Towers and ntenna Supporting
HexPort Multi-Band Antenna
DATA SHEET Six foot (1.8 m), six port antenna with a 65 azimuth beamwidth covering 698-894 MHz and 1710-2360 MHz frequencies Four high band and two low band ports including the WCS band in a single antenna
Twelve Port Multi-Band Antenna
DATA SHEET Eight High Broadband ports covering PCS, AWS / AWS-3 and WCS bands (698-798 MHz, 824-896 MHz. & 1695-2360 MHz.) Four Low Band ports covering 700 MHz and 850 MHz bands Supports 8x8 MIMO in high
Trio Data Radios. Wireless Accessories. Product at a glance
Product at a glance Schneider Electric offers a complementary suite of wireless accessories to facilitate the deployment of both licensed and license-free Trio Data Radios. Whether you need antennas or
CRIMP CONNECTORS & ACCESSORIES Universal Crimp Termination System. Heavy-duty lightweight stamped steel frame.
Universal Crimp Termination System Extron Universal Crimp Tool Four in One Coax BNC Connector Crimp Tool The affordable heavy-duty Universal BNC Crimp Tool was designed by Extron to be the single tool
Digital flow ELEMENT transmitter for continuous flow measurement
ELEMENT Transmitter Digital flow ELEMENT transmitter for continuous flow measurement Type can be combined with... PN10, DN15 to DN400 fluidic process connection Programmable outputs : one or two transistor
Agilent Accessories Selection Guide For Impedance Measurements. December 2008
Agilent Accessories Selection Guide For Impedance Measurements December 2008 Table of Contents Introduction 1 1. What are Agilent Accessories? 1 2. Types of Accessories 1 3. The Benefits of Agilent Accessories
HARAX. Contents Technical characteristics circular connector with HARAX rapid termination 50.02
Contents Page Technical characteristics circular connector with rapid termination 50.02 Circular connector M8/M12 with rapid termination... 50.05 Han M12 panel feed-through... 50.08 Han M12 pcb adapter...
HexPort Multi-Band Antenna
DATA SHEET Six foot (1.8 m), six port antenna with a 33 azimuth beamwidth covering 698-894 MHz and 1710-2360 MHz Four high band and two low band ports including the WCS band in a single antenna Sharp elevation
Group: Names: (1) In this step you will examine the effects of AC coupling of an oscilloscope.
3.5 Laboratory Procedure / Summary Sheet Group: Names: (1) In this step you will examine the effects of AC coupling of an oscilloscope. Set the function generator to produce a 5 V pp 1kHz sinusoidal output.
TriBand Antenna HPA65R-KE4A DATA SHEET
DATA SHEET Four foot (1.2 m), TriBand, six port antenna with a 65 azimuth beamwidth covering 694-960 MHz and 1695-2690 MHz frequencies Four wide high band ports covering 1695-2690 MHz and two wide low
SECTION 14. DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214
SECTION 14 14 DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214 Contents DIN 1.0/2.3 Introduction... 14-4 Interface... 14-4 Characteristics Eco... 14-5 Plugs Eco... 14-6 Jacks Eco... 14-6
Nick Garner N3WG and George Zafiropoulos KJ6VU
Nick Garner N3WG and George Zafiropoulos KJ6VU Introduction Over the last few years, there has been a significant increase in the number of radio amateurs interested in portable operating. This is due
A short, off-center fed dipole for 40 m and 20 m by Daniel Marks, KW4TI
A short, off-center fed dipole for 40 m and 20 m by Daniel Marks, KW4TI Version 2017-Nov-7 Abstract: This antenna is a 20 to 25 foot long (6.0 m to 7.6 m) off-center fed dipole antenna for the 20 m and
SMB Plug Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, inch
SMB Plug Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, 0100 inch RF Connectors Technical Data Sheet PE4046 Configuration SMB Plug Connector MIL-STD-348A 50 Ohms
TNC Male Right Angle Connector Crimp/ Solder Attachment for RG174, RG316, RG188, inch, PE-B100, PE-C100, LMR-100
TNC Male Right Angle Connector Crimp/ Solder Attachment for RG174, RG316, RG188, 0100 inch, PE-B100, PE-C100, LMR-100 RF Connectors Technical Data Sheet PE4455 Configuration TNC Male Connector 50 Ohms
MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz
MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz Low Loss Low Density PTFE Dielectric RF Microwave Coaxial Cable Silver Plated Copper
TriBand Twelve-Port Antenna
DATA SHEET Six foot (1.8 m) TriBand, twelve port antenna with a 65 azimuth beamwidth covering 694-960 MHz and 1695-2690 MHz frequencies Eight wide high band ports covering 1695-2690 MHz and four wide low
Multi-Band Twelve-Port Antenna
DATA SHEET Eight foot (2.4 m) multiband, twelve port antenna with a 65 azimuth beamwidth covering 698-896 MHz and 1695-2400 MHz frequencies Eight high band ports covering 1695-2400 MHz and four low band
Accessories Selection Guide For Impedance Measurements. April 2005
Accessories Selection Guide For Impedance Measurements April 2005 Table of Contents Introduction 1 1. What are Agilent Accessories? 1 2. Types of Accessories 1 3. The Benefits of Agilent Accessories 2
C400-UMUM-100. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C400-UMUM-100 Product Classification Brand Product Series Product Type CNT Jumper with interface types UHF Male and UHF Male, 30.48 m CNT Braided cable assembly General Specifications Body Style, Connector
Twelve Port Multi-Band Antenna
DATA SHEET Four foot (1.2 m) multiband, twelve port antenna with a 65 azimuth beamwidth covering 698-798 MHz, 824-896 MHz and 1695-2360 MHz frequencies Total of Eight high band ports, four high wide band
THE W3FF HOMEBREW BUDDIPOLE
THE W3FF HOMEBREW BUDDIPOLE A PORTABLE ANTENNA DESIGN FOR AMATEUR RADIO History of the Buddipole In January of 2000, I began experimenting with a walking portable ham station. Since then, thousands of
User Instructions DSI 2008 Digital System Interface ADAM, ADAM CS, and Zeus Intercoms
User Instructions DSI 2008 Digital System Interface ADAM, ADAM CS, and Zeus Intercoms 9350-7870-000 Rev C 11/2008 PROPRIETARY NOTICE The product information and design disclosed herein were originated
Accessories Selection Guide
2008 www.gemds.com Selection Guide April, 2008 GE MDS is the world s leading single-source, end-to-end wireless solutions provider. With highly secure point-to-point and point-to-multipoint solutions in
(TCPWCH-) HDMI Common Mode Filters & Chokes
Version: June 26, 2017 (TCPWCH-) HDMI Common Mode Filters & Chokes Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
OctoPort Multi-Band Antenna
DATA SHEET Four foot (1. m) multiband, eight port antenna with a 65 azimuth beamwidth covering 698-798, 84-896 MHz and 1695-400 MHz frequencies Four wide high band ports covering 1695-400 MHz and four
Aurora,Ohio Fax:
VPI VIDEO 1275 Danner Drive PRODUCTS Tel: 330-562-2622 www.vpi.us INCORPORATED Aurora,Ohio 44202 Fax: 330-562-1999 CRIMP-RJ45-SF 8 Contact Modular Crimp Tool For RJ45 Superflat Modular Plugs Introduction
Data sheet. M12 Jack X-coded IP67, field assembly. Illustrations P/N MMF881A315 EAN Product specification. Page 1/
Page 1/6 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification 8-pole M12 jack for field assembly Cat.6A per IEC/PAS 61076-2-109 suitable for 10 GBit
Ten Port Multi-Band Antenna
DATA SHEET Six foot (1.8 m) multiband, 10 port antenna with a 65 azimuth beamwidth covering 698-896 MHz and 1695-360 MHz frequencies Full Spectrum Compliance for WCS, AWS3 and upcoming Band 14 Operations
RF Components Product Catalogue
RF Components Product Catalogue Government and Defence Broadcast Marine, Oil and Gas SNG and VSAT RF Engineering by Design Contents Splitters / Combiners Active Splitters and Combiners Page 3 Passive Splitters
Coupling/Decoupling Networks (CDN)
Coupling/Decoupling Networks (CDN) For immunity testing according to IEC / EN 61000-4-6 Immunity testing CDNs are the preferred coupling and decoupling devices, for reasons of test reproducibility and
RFX. Type N RG58, 141, 142 Straight Plug Type N Connectors» Cable Straight. Jack 50 Ohm Yes
Please note: Images are for reference only Amphenol Part Number: Description: Product Series: Product Type: Connector Body Style: Gender: Impedance: RoHS Compliant: 082-5376-RFX RG58, 141, 142 Straight
POWER LINE IMPEDANCE STABLIZATION NETWORK (LISN) MODEL PLISN-25/2. 5 khz 1 GHz
INSTRUCTION MANUAL POWER LINE IMPEDANCE STABLIZATION NETWORK (LISN) MODEL PLISN-25/2 5 khz 1 GHz INSTRUCTION MANUAL THIS INSTRUCTION MANUAL AND ITS ASSOCIATED INFORMATION IS PRO- PRIETARY. UNAUTHORIZED
Schlöder GmbH - EMC Test and Measurement Systems Model #
Schlöder GmbH - EMC Test and Measurement Systems Model # Product Description IEC / EN 61000-4 - 2 ESD SESD 216 ESD generator 10 kv CON / 16,5 kv AIR acc. to IEC 61000-4-2, 150 pf / 330 ohm SESD 230 ESD
Vi6208, Vi6216, Vi6232 Vi6308, Vi6316, Vi6332
MODELs Vi6208, Vi6216, Vi6232 Vi6308, Vi6316, Vi6332 Automatic Video Compensation UTP Receiver Hubs User s Manual 7810 Trade Street, Suite 100 San Diego, CA 92121, U.S.A. Phone: (858) 484-5209 Fax: (858)
Data sheet. C5 RJ45 field plug pro 2P 360 PROFINET. Illustrations P/N 130E405042PE EAN Product specification. Page 1/
Page 1/6 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification Cat.5 class D RJ45 plug, 2 pairs, to be assembled in the field fully shielded and multi-port
Variable-Gain High Speed Current Amplifier
Features Transimpedance (gain) switchable from 1 x 10 2 to 1 x 10 8 V/A Bandwidth from DC up to 200 MHz Upper cut-off frequency switchable to 1 MHz, 10 MHz or full bandwidth Switchable AC/DC coupling Adjustable