Series IV Pro-Connect Baluns. Set-Up Guide

Size: px

Start display at page:

Download "Series IV Pro-Connect Baluns. Set-Up Guide"

Doris Parrish
5 years ago
Views:

1 Series IV Pro-Connect Baluns PCBKDCOVAAB, PCBKDCOVDAB, PCBKDCOVIRB, PCBKDCOVSAB Set-Up Guide PCBKDCOVAAB PCBKDCOVIRB PCBKDCOVDAB PCBKDCOVSAB Key Digital Pro-Connect Series Baluns; PCBKDCOVAAB Component HD Video with Analog Audio, PCBKDCOVDAB Component HD Video with Digital Audio, PCBKDCOVIRB Component HD Video with IR pass-through and PCBKDCOVSAB Component HD Video with Analog Stereo Audio over CAT5e/6.

PCBKDCOVAAB About PCBKDCOVAAB 1 Description: Component (YPrPb) HD Video with Monaural Analog Audio over CAT5e/6 Balun via Four (4) female gold plated RCA to RJ45

Supports 480i/p Video up to 1,000ft. and analog Audio to 2,000ft Eliminates COAX or other cabling Key Benefits: Ultra compact size for installation versatility.

the transmit Balun into the Video and Audio outputs of the source component you wish to transmit.

2 PCBKDCOVAAB About PCBKDCOVAAB 1 Description: Component (YPrPb) HD Video with Monaural Analog Audio over CAT5e/6 Balun via Four (4) female gold plated RCA to RJ45 jack. Key Features: Supports Component HD Video at 720p or 1080i with Analog Audio up to 300ft. for best quality, 600ft. for good quality. Supports 480i/p Video up to 1,000ft. and analog Audio to 2,000ft Eliminates COAX or other cabling Key Benefits: Ultra compact size for installation versatility. Allows a simple and cost effective solution for Component HDTV distribution High quality Gold plated RCA connectors Quick Setup Guide: Plug the RCA connectors of the transmit Balun into the Video and Audio outputs of the source component you wish to transmit. Plug the Video and Audio connectors from the receive Balun into your desired input component. Insert the CAT5 cable into both ends of the Baluns. You may use standard EIA 568A/B termination. NOTE: Baluns are interchangeable for transmit or receive functions.

2 Application Example PCBKDCOVAAB Game Console Monitor Settings: DIP switches are located on the Baluns. There is normally 1 switch for each connection on the Balun.

3 2 Application Example PCBKDCOVAAB Game Console Monitor Settings: DIP switches are located on the Baluns. There is normally 1 switch for each connection on the Balun. Each switch position corresponds to a different configuration. Switch positions are; 0 = Up (Off) and 1 = Down (On) DIP Switch Configurations: 0 = 1111 ON Configuration Description 0000 UTP RJ45 Shield Open to Ground 1111 UTP/STP RJ45 Shield Connected to Ground (Default)

4 3 Specifications: Technical Signal: Component (YPrPb) Video, RGB Video (sync on green) at 480i/p, 720p and 1080i. Line level analog Audio Bandwidth: Video: 60MHz, Audio: 20Hz 20kHz Maximum Video Distance: 480i/p up to 1,000ft, 720p and 1080i up to 300ft. for best quality, 600ft. for good quality. Maximum Audio Distance: Analog Audio up to 2,000ft Maximum Input Level: Video 1.1Vp-p, Audio 2vRMS Insertion Loss per Pair of Baluns: 0.1dB for 0.1MHz increasing to 3.0 db over frequency range. Video Impedance: Input: 75Ω Cable (UTP): 24 Gauge or lower solid copper twisted pair wire impedance; 100Ω at 1MHz. Maximum capacitance 20 pf/foot, Attenuation; 6.6dB/100ft at 1MHz Connectors: Three (3) RCA female for Video, One (1) RCA female for Analog Audio, One (1) RJ45 jack RJ45 Pinout: Pin #1 = Blue (Pb) -» Pin #2 = Blue (Pb) + Pin #3 = Green (Y) -» Pin #4 = Audio - Pin #5 = Audio +» Pin #6 = Green (Y) + Pin #7 = Red (Pr) -» Pin #8 = Red (Pr) + General: Dimensions: 2.40 X 2.25 X 1.00 (6.1 x 5.7 x 2.54 cm) Weight: 2.9oz (81 Gms) Enclosure: Fire retardant plastic Operating Temperature: 0º to 55ºC

5 13 Important Product Warnings: 1. Test for proper operation before securing unit behind walls or in hard to access spaces. 2. If installing the unit into wall or mounting bracket into sheet-rock, provide proper screw support with bolts or sheet-rock anchors. Safety Instructions: Please be sure to follow these instructions for safe operation of your unit. 1. Read and follow all instructions. 2. Heed all warnings. 3. Do not use this device near water. 4. Clean only with dry cloth. 5. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 6. Only use attachments/accessories specified by the manufacturer. 7. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way including: Damage to the power supply or power plug Liquid spills on the device Objects fallen into the device Exposure to rain or moisture

6 Rev 0 Nov 2010 How to Contact Key Digital Technical Support For technical questions about using Key Digital products, please contact us at: Phone: tech@keydigital.com Repairs and Warranty Service Should your product require warranty service or repair, please obtain a Key Digital Return Material Authorization (RMA) number by contacting us at: Phone: rma@keydigital.com Feedback Please any comments/questions about the manual to: customersupport@keydigital.com Warranty All Key Digital products are built to high manufacturing standards and should provide years of trouble-free operation. They are backed by a limited two-year parts and labor warranty. 521 East 3rd Street, Mount Vernon, NY Phone :: Fax :: Web ::

KD-CATVGA KD-CATCVX. Set-Up Guide. Key Digital Fat CAT Series Baluns: KD-CATVGA - VGA Video Balun, KD-CATCVX - Composite Video with Stereo Audio Balun

KD-CATVGA KD-CATCVX. Set-Up Guide. Key Digital Fat CAT Series Baluns: KD-CATVGA - VGA Video Balun, KD-CATCVX - Composite Video with Stereo Audio Balun Key Digital, led by digital video pioneer Mike Tsinberg, develops and manufactures high quality, cutting-edge technology solutions for virtually all applications where high quality video imaging is important.