Agilent 10-Element Bar Graph Array Data Sheet

Size: px

Start display at page:

Download "Agilent 10-Element Bar Graph Array Data Sheet"

Garey Lynch
5 years ago
Views:

Agilent -Element Bar Graph Array Data Sheet HLCP-J HDSP-8 HDSP-8 HDSP-8 Description These -element LED arrays are designed to display information in easily recognizable bar graph form.

1 Agilent -Element Bar Graph Array Data Sheet HLCP-J HDSP-8 HDSP-8 HDSP-8 Description These -element LED arrays are designed to display information in easily recognizable bar graph form. The packages are end stackable and therefore capable of displaying long strings of information. Use of these bar graph arrays eliminates the alignment, intensity, and color matching problems associated with discrete LEDs. The HDSP-8/ 8/8/8 and HLCP-J each contain LEDs of one color. The HDSP-8/8 are multicolor arrays with High Efficiency Red, Yellow, and High Performance Green LEDs in a single package. Features Custom multicolor array capability Matched LEDs for uniform appearance End stackable Package interlock ensures correct alignment Low profile package Rugged construction Large, easily recognizable segments High ON-OFF contrast, segment to segment Wide viewing angle Categorized for luminous intensity HDSP-8/8/8/8 categorized for dominant wavelength HLCP-J operates at low current Typical intensity of. mcd at ma drive current Package Dimensions.8 (.).8 (.). (.) MAX.. (.) MAX.. DIMENSIONS IN MILLIMETERS (INCHES).. ALL UNTOLERANCED DIMEMSIONS FOR REFERENCE ONLY.. HDSP-8/-8/-8/-8 ONLY. Applications Industrial controls Instrumentation Office equipment Computer peripherals Consumer products. (.). (.) DATE CODE PIN ONE MARKING LUMINOUS INTENSITY CATEGORY HDSP XXXX XYY ZW COLOR BIN (NOTE ).8 (.). ±. (. ±.). (.). ±. (. ±.). (.) MIN. 7. ±.8 (. ±.).8 (.)

2 Red AlGaAs Red HER Yellow Green Parameter HDSP-8 HLCP-J HDSP-8 HDSP-8 HDSP-8 Average Power Dissipation per LED mw 7 mw 87 mw mw mw (T A = C) Peak Forward Current per LED ma [] ma [] 9 ma [] ma [] 9 ma [] DC Forward Current per LED ma [] ma [] ma [] ma [] ma [] Operating Temperature Range - C to +8 C - C to + C - C to +8 C - C to +8 C Storage Temperature Range - C to +8 C - C to + C - C to +8 C Reverse Voltage per LED. V. V. V Lead Soldering Temperature C for seconds [8] (.9 mm (/ inch) below seating plane) [] Notes:. See Figure to establish pulsed operating conditions. Maximum pulse width is. ms.. See Figure to establish pulsed operating conditions. Maximum pulse width is. ms.. See Figure 8 to establish pulsed operating conditions. Maximum pulse width is ms.. Derate maximum DC current for Red above T A = C at.79 ma/ C, and AlGaAs Red above T A = 9 C at.8 ma/ C. See Figure.. Derate maximum DC current for HER above T A = 8 C at.8 ma/ C, Yellow above T A = 7 C at. ma/ C, and Green above T A = 7 C at.8 ma/ C. See Figure 9.. Clean only in water, isopropanol, ethanol, Freon TF or TE (or equivalent), or Genesolve DI- (or equivalent). 7. Absolute maximum ratings for HER, Yellow, and Green elements of the multicolor arrays are identical to the HDSP-8/8/8 maximum ratings. 8. Maximum tolerable component side temperature is C during solder process. Internal Circuit Diagram a b 9 c 8 d 7 e f 7 g 8 h 9 i j Pin Function Pin Function Anode a Cathode j Anode b Cathode i Anode c Cathode h Anode d Cathode g Anode e Cathode f Anode f Cathode e 7 Anode g 7 Cathode d 8 Anode h 8 Cathode c 9 Anode i 9 Cathode b Anode j Cathode a

3 Multicolor Array Segment Colors HDSP-8 HDSP-8 Segment Segment Color Segment Color a HER HER b HER HER c HER Yellow d Yellow Yellow e Yellow Green f Yellow Green g Yellow Yellow h Green Yellow i Green HER j Green HER Electrical/Optical Characteristics at T A = C [] Red HDSP-8 Luminous Intensity per LED (Unit Average) [] I V µcd I F = ma Peak Wavelength l PEAK nm Dominant Wavelength [] l d nm Forward Voltage per LED V F.. V I F = ma Reverse Voltage per LED [] V R V I R = µa Temperature Coefficient V F per LED V F / C -. mv/ C Thermal Resistance LED Junction-to-Pin Rq J-PIN C/W/LED AlGaAs Red HLCP-J Luminous Intensity per LED (Unit Average) [] I V µcd I F = ma I F = ma Pk; of Duty Factor Peak Wavelength l PEAK nm Dominant Wavelength [] l d 7 nm Forward Voltage per LED V F. V I F = ma.8. I F = ma Reverse Voltage per LED [] V R V I R = µa Temperature Coefficient V F per LED V F / C -. mv/ C Thermal Resistance LED Junction-to-Pin Rq J-PIN C/W/LED

4 High Efficiency Red HDSP-8 Luminous Intensity per LED (Unit Average) [,] I V 9 µcd I F = ma Peak Wavelength l PEAK nm Dominant Wavelength [] l d nm Forward Voltage per LED V F.. V I F = ma Reverse Voltage per LED [] V R V I R = µa Temperature Coefficient V F per LED V F / C -. mv/ C Thermal Resistance LED Junction-to-Pin Rq J-PIN C/W/LED Yellow HDSP-8 Luminous Intensity per LED (Unit Average) [,] I V 9 µcd I F = ma Peak Wavelength l PEAK 8 nm Dominant Wavelength [,] l d nm Forward Voltage per LED V F.. V I F = ma Reverse Voltage per LED [] V R V I R = µa Temperature Coefficient V F per LED V F / C -. mv/ C Thermal Resistance LED Junction-to-Pin Rq J-PIN C/W/LED Green HDSP-8 Luminous Intensity per LED (Unit Average) [,] I V 9 µcd I F = ma Peak Wavelength l PEAK nm Dominant Wavelength [,] l d 7 77 nm Forward Voltage per LED V F.. V I F = ma Reverse Voltage per LED [] V R V I R = µa Temperature Coefficient V F per LED V F / C -. mv/ C Thermal Resistance LED Junction-to-Pin Rq J-PIN C/W/LED Notes:. The bar graph arrays are categorized for luminous intensity. The category is designated by a letter located on the side of the package.. The dominant wavelength, l d, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.. The HDSP-8/-8/-8/-8 bar graph arrays are categorized by dominant wavelength with the category designated by a number adjacent to the intensity category letter. Only the yellow elements of the HDSP-8/-8 are categorized for color.. Electrical/optical characteristics of the High-Efficiency Red elements of the HDSP-8/-8 are identical to the HDSP-8 characteristics. Characteristics of Yellow elements of the HDSP-8/-8 are identical to the HDSP-8. Characteristics of Green elements of the HDSP-8/-8 are identical to the HDSP-8.. Reverse voltage per LED should be limited to. V max. for the HDSP-8/-8/-8/-8/-8/-8 and. V max. for the HLCP-J.

5 Red, AlGaAs Red RATIO OF MAXIMUM OPERATING PEAK CURRENT TO TEMPERATURE DERATED MAXIMUM DC CURRENT I PEAK MAX I DC MAX. 8. KHz KHz KHz Hz f - REFRESH RATE Hz OPERATION IN THIS REGION REQUIRES TEMPERATURE DERATING OF I DC MAX DC OPERATION RATIO OF MAXIMUM OPERATING PEAK CURRENT TO TEMPERATURE DERATED MAXIMUM DC CURRENT I PEAK MAX I DC MAX KHz KHz KHz Hz f - REFRESH RATE Hz OPERATION IN THIS REGION REQUIRES TEMPERATURE DERATING OF I DC MAX DC OPERATION t P PULSE DURATION µsec t P PULSE DURATION µs Figure. Maximum Tolerable Peak Current vs. Pulse Duration Red. Figure. Maximum Tolerable Peak Current vs. Pulse Duration AlGaAs Red. I DC MAX MAXIMUM DC CURRENT PER SEGMENT ma Rθ J-A = C/W RED AlGaAs RED η PEAK RELATIVE EFFICIENCY (NORMALIZED TO AT ma FOR RED: AT ma FOR AlGaAs RED). AlGaAs RED RED I F FORWARD CURRENT PER SEGMENT ma RED 8 AlGaAs RED T A AMBIENT TEMPERATURE C I PEAK PEAK SEGMENT CURRENT ma V F FORWARD VOLTAGE V Figure. Maximum Allowable DC Current vs. Ambient Temperature. T JMAX = C for Red and T JMAX = C for AlGaAs Red. Figure. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. Figure. Forward Current vs. Forward Voltage.. RELATIVE LUMINOUS INTENSITY (NORMALIZED TO. AT ma) RELATIVE LUMINOUS INTENSITY (NORMALIZED TO AT ma).... I F FORWARD CURRENT PER SEGMENT ma I F FORWARD CURRENT PER SEGMENT Figure. Relative Luminous Intensity vs. DC Forward Current Red. Figure 7. Relative Luminous Intensity vs. DC Forward Current AlGaAs. For a Detailed Explanation on the Use of Data Sheet Information and Recommended Soldering Procedures, See Application Note.

6 HER, Yellow, Green RATIO OF MAXIMUM OPERATING PEAK CURRENT TO TEMPERATURE DERATED MAXIMUM DC CURRENT I PEAK MAX I DC MAX GREEN HER 8. YELLOW KHz KHz Hz KHz f - REFRESH RATE Hz OPERATION IN THIS REGION REQUIRES TEMPERATURE DERATING OF I DC MAX DC OPERATION t P PULSE DURATION µsec Figure 8. Maximum Tolerable Peak Current vs. Pulse Duration HER/Yellow/Green. I DC MAX MAXIMUM DC CURRENT PER SEGMENT ma GREEN/HER GREEN YELLOW Rθ J-A = C/W HER YELLOW η PEAK RELATIVE EFFICIENCY YELLOW SERIES HER SERIES GREEN SERIES T A AMBIENT TEMPERATURE C I PEAK PEAK SEGMENT CURRENT ma Figure 9. Maximum Allowable DC Current vs. Ambient Temperature. T JMAX = C. Figure. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. I F FORWARD CURRENT PER SEGMENT ma GREEN SERIES HER SERIES. YELLOW SERIES... RELATIVE LUMINOUS INTENSITY V F FORWARD VOLTAGE V I F FORWARD CURRENT PER SEGMENT ma Figure. Forward Current vs. Forward Voltage. Figure. Relative Luminous Intensity vs. DC Forward Current. For a Detailed Explanation on the Use of Data Sheet Information and Recommended Soldering Procedures, See Application Note.

7 Electrical/Optical These versatile bar graph arrays are composed of ten light emitting diodes. The light from each LED is optically stretched to form individual elements. The Red (HDSP-8) bar graph array LEDs use a p-n junction diffused into a GaAsP epitaxial layer on a GaAs substrate. The AlGaAs Red (HLCP-J) bar graph array LEDs use double heterojunction AlGaAs on a GaAs substrate. HER (HDSP- 8) and Yellow (HDSP-8) bar graph array LEDs use a GaAsP epitaxial layer on a GaP substrate. Green (HDSP-8) bar graph array LEDs use liquid phase GaP epitaxial layer on a GaP substrate. The multicolor bar graph arrays (HDSP-8/ 8) have HER, Yellow, and Green LEDs in one package. These displays are designed for strobed operation. The typical forward voltage values can be scaled from Figures and. These values should be used to calculate the current limiting resistor value and typical power consumption. Expected maximum V F values for driver circuit design and maximum power dissipation may be calculated using the V FMAX models: Standard Red HDSP-8 series V F MAX =.8 V + I Peak ( Ω) For: I Peak ma AlGaAs Red HLCP-J series V F MAX =.8 V + I Peak ( Ω) For: I Peak ma V F MAX =. V + I Peak ( Ω) For: I Peak ma HER (HDSP-8) and Yellow (HDSP-8) series V F MAX =. + I Peak ( Ω) For: ma I Peak ma V F MAX =.7 + I Peak (8 Ω) For: I Peak ma Green (HDSP-8) series V F MAX =. + I Peak ( Ω) For: I Peak > ma Figures and allow the designer to calculate the luminous intensity at different peak and average currents. The following equation calculates intensity at different peak and average currents: I V AVG = (I F AVG/I F AVG DATA SHEET)h peak )(I V DATA SHEET) Where: I V AVG is the calculated time averaged luminous intensity resulting from I F AVG. I F AVG is the desired time averaged LED current. I F AVG DATA SHEET is the data sheet test current for I V DATA SHEET. h peak is the relative efficiency at the peak current, scaled from Figure or. I V DATA SHEET is the data sheet luminous intensity, resulting from I F AVG DATA SHEET. For example, what is the luminous intensity of an HDSP- 8 driven at ma peak / duty factor? I F AVG = ( ma)(.) = ma I F AVG DATA SHEET = ma h peak =. I V DATA SHEET = µcd Therefore I V AVG = ( ma/ ma) (.)( µcd) = µcd 7

8 For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: + (8) - or (9) Europe: +9 () 9 China: 8 7 Hong Kong: (+) 7 9 India, Australia, New Zealand: (+) 7 99 Japan: (+8 ) -8 (Domestic/International), or --8 (Domestic Only) Korea: (+) Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+) 7 Taiwan: (+) 7 8 Data subject to change. Copyright Agilent Technologies, Inc. April, 989-9EN

10-Element Bar Graph Array. Technical Data HLCP-J100 HDSP-4820 HDSP-4830 HDSP-4832

10-Element Bar Graph Array. Technical Data HLCP-J100 HDSP-4820 HDSP-4830 HDSP-4832 -Element Bar Graph Array Technical Data HLCP-J HDSP-48 HDSP-483 HDSP-483 Features Custom Multicolor Array Capability Matched LEDs for Uniform Appearance End Stackable Package Interlock Ensures Correct