550-xx mm LED CBI. Circuit Board Indicator Square Back Housing, Tri-Block x x x 3
|
|
- Jewel Nichols
- 5 years ago
- Views:
Transcription
1 5mm LED CBI Circuit Board Indicator Square Back Housing, Tri-Block 5.9 [.235] 3.8 [.145] Features 2.99 [.118].35 [.250].35 [.250] 18.4 [.734].35 [.250] RECOMMENDED P.C. HOLE PATTERN 4.83 [.190] A Red Cathode for Red/Green Bi-Color Cathode for /Green Bi-Color 5.84 [.230] 5.21 [.205] Dimension A: 3.43 [.135] for to -0405, 5.0 [.197] for all others Dimension B:.35 [.025] for to -0705,.508 [.020] for all others Hole Diameter: 1.22 [.048] for.35 [.025] leads, 2 for all others Standard Polarity shown in drawing: Cathode right Multiple CBIs form horizontal LED arrays on.35mm (0.250 ) center-lines. High Contrast, UL 94 V-0 rated, black housing Oxygen index: 32% Polymer content: PBT, 0.50 g Housing stand-offs facilitate PCB cleaning Solderability per MIL-STD-202F, method 208F LEDs are safe for direct viewing per IEC 825-1, EN Compatible with: 550-xx05 Single-Block 550-xx Quad-Block B PART NO. 550-xx COLOR* GENERAL PURPOSE Green Red INTEGRAL RESISTOR Red, 5V Green, 5V , 5V LOW CURRENT Red Green HIGH EFFICIENCY Green Red Orange BI-COLOR Red/Green /Green SUPER BRIGHT, DIFFUSED Red Green SUPER BRIGHT, WATER CLEAR (Non-tinted, Non-diffused) Red Green NEW Custom Combinations Contact factory for information on custom color combinations Tolerance note: As noted, otherwise: LED Protrusion: ±0.04 mm [±0.01] CBI Housing: ±0.02mm[±0.008] Series * LED 1, LED 2, LED 3 Reverse Polarity (Cathode Left) option available. See Part Number Ordering Code. LED Type PART NUMBER ORDERING CODE x x x 3 Polarity Option 0- Standard Cathode Right 1- Reverse Cathode Left Tri Block -28
2 Typical Operating Characteristics (T A =25 C) GENERAL PURPOSE 550-xx See LED data sheet for additional information See page -55 and -5 for Reference Only LED Drive Circuit Examples. See page -58 for Pin Out Green ND ND Red ND INTEGRAL RESISTOR Peak I V Test Forward Viewing LED Part Number Color Wavelength nm mcd Voltage Current (ma) Angle 2Θ½ Data sheet Page # Red RD Green RD LOW CURRENT Red Green HIGH EFFICIENCY Green HD HD Red HD Orange BI-COLOR Red/Green 0/55 90/40 1.8/ /Green 585/55 8.7/ / SUPER BRIGHT, DIFFUSED Red SD Green SD SD SUPER BRIGHT, WATER CLEAR (NON-TINTED, NON-DIFFUSED) Red Green
3 5mm Discrete LED Integral Resistor, 5 Volts Diffused , [.32] 8.43 [.332].7 [.030].4 [.025] 5.84 [.230] PART NO. LED COLOR Red [.200] 4.57 [.180] 25.1 [0] MIN 1.27 [.050] MOUNTING CLIP: located on page -48 ABSOLUTE IMUM RATINGS (T A =25 C) Forward Voltage (V) Derating (V/ C) From 50 C Operating Temperature ( C) -40/+85-40/+85 Storage Temperature ( C) -55/ /+100 Red =25 C) Luminous Intensity (mcd) Min. 2 2 V F = 5V Typical 8 8 Peak Wavelength (nm) Typical Viewing Angle (2Θ ½ ) Typical 0 0 Forward Current (I) Typical V F = 5V Max Reverse Voltage (V), I R =100µA Min. 5 5 Red -41
4 5mm Discrete LED Low Current, 2mA Diffused , -9321, [.190] 8.81 [.347].7 [.030].4 [.018] 5.84 [.230] PART NO. COLOR Red Green 25.1 [0] MIN 1.27 [.050] MOUNTING CLIP: located on page -48 Red Green ABSOLUTE IMUM RATINGS (TA=25 C) Power Dssipation (mw) Derating (ma/ C) From 92 C Forward Current (ma) Peak Current (ma) Pulse width = 10 µs Operating Temperature ( C) -55/ / /+100 Storage Temperature ( C) -55/ / /+100 Red Green OPERATING CHARACTERISTICS (TA=25 C) Luminous Intensity (mcd) Min I F =2mA Typical Peak Wavelength (nm) Typical Viewing Angle (2Θ ½ ) Typical Forward Voltage (V) Typical I F =2mA Max Reverse Voltage (V), I R =50µA Min
5 5mm Discrete LED High Efficiency Diffused , -9248, -9250, PART NO. COLOR 4.83 [.190] 8.81 [.347].7 [.030] 25.1 [0] MIN.4 [.018] 1.27 [.050] 5.84 [.230] Red Green Orange MOUNTING CLIP: located on page -48 Red Green Orange ABSOLUTE IMUM RATINGS (T A =25 C) Power Dissipation (mw) Derating (mw/ C) From 25 C 1. (ma/ C) From 50 C Forward Current (ma) Peak Current (ma) Pulse width = 10µs Operating Temperature ( C) -55/ / / /+100 Storage Temperature ( C) -55/ / / /+100 Red Green Orange =25 C) Luminous Intensity (mcd) Min I F =10mA Typical Peak Wavelength (nm) Typical Viewing Angle (2Θ ½ ) Typical Forward Voltage (V) Typical I F =10mA Max Reverse Voltage (V), I R =100µA Min
6 5mm Discrete LED Bi-Color Non-Tinted, Diffused , [.340] 1.50 [.059] 0.51 [.020] 5.59 [.220] PART NO. LED COLOR Red/Green 5.00 [.197] /Green 22.1 [.87] MIN. 0 [.04] GREEN, RED/GREEN BI-COLOR YELLOW, YELLOW/GREEN BI-COLOR MOUNTING CLIP: located on page -48 Red/Green /Green ABSOLUTE IMUM RATINGS (T A =25 C) Power Dissipation (mw) 100/100 0/100 Forward Current (ma) 40/30 20/30 Derating (ma/ C) From 50 C.5/.4.25/.40 Peak Current (ma) 200/120 80/120 Pulse width = 100 µs Operating Temperature ( C) -55/ /+100 Storage Temperature ( C) -55/ /+100 Red/Green /Green =25 C) Luminous Intensity (mcd) Min. 29/ /2.5 I F =20mA Typical 90/40 8.7/8.7 Peak Wavelength (nm) Typical 0/55 585/55 Viewing Angle (2Θ ½ ) Typical 0 50 Forward Voltage (V) Typical 1.8/ /2.1 I F =20mA Max. 2.4/ /2.8-4
7 5mm Discrete LED Super Bright, Water Clear Non-Tinted, Non-Diffused ,-945, [.190] 8.81 [.347] 5.84 [.230] PART NO. COLOR Red Green [.998] MIN 1.27 [.050] TYP.4 [.018] SQ. MOUNTING CLIP: located on page -48 Red Green ABSOLUTE IMUM RATINGS (T A =25 C) Power Dissipation (mw) Derating (mw/ C) From 25 C 1. From 50 C Forward Current (ma) Peak Current (ma) Pulse width = 10 µs Operating Temperature ( C) -55/ / /+100 Storage Temperature ( C) -55/ / / C, 5 seconds, 1. mm from case Red Green =25 C) Luminous Intensity (mcd) Min I F =20mA Typical Peak Wavelength (nm) Typical Viewing Angle (2Θ ½ ) Typical Forward Voltage (V) Typical I F =20mA Max Reverse Voltage (V), I R =100µA Min
8 5mm High Efficiency Diffused 5HD-xxxx * NOT A VALID PART NUMBER. THIS SHEET IS FOR REFERENCE ONLY. TYPE *5HD-929 *5HD *5HD *5HD *5HD COLOR Red Green Green ABSOLUTE IMUM RATINGS Red Green Green (T A =25 C) Power Dissipation (mw) Derating (mw/ C) From 50 C 1. From 40 C Forward Current (ma) Derating (ma/ C) From 25 C..8 Peak Current (ma) Pulse width = 1µs Operating Temperature ( C) -25/+85-55/ /+85-55/ /+85 Storage Temperature ( C) -30/ / / / /+100 OPERATING CHARACTERISTICS Red Green Green (T A =25 C) Luminous Intensity (mcd) Min I F =10mA Typical Peak Wavelength (nm) Typical Viewing Angle (2Θ ½ ) Typical Forward Voltage (V) Typical 2.2 2* * 2.1 I F =10mA, *I F =20mA Max * 3 3* 3 Reverse Voltage (V), Min. 5 5* 3* 5* 3 I R =100µA *I R =10µA -49
9 5mm General Purpose Diffused * NOT A VALID PART NUMBER. THIS SHEET IS FOR REFERENCE ONLY. TYPE *5ND-972 *5ND-973 *5ND-974 5ND-xxxx COLOR Red Green Red Green ABSOLUTE IMUM RATINGS (T A =25 C) Power Dissipation (mw) Forward Current (ma) Derating (ma/ C) From 25 C Peak Current (ma) Pulse width = 10 µs Operating Temperature ( C) -55/ / /+100 Storage Temperature ( C) -55/ / /+100 Red Green =25 C) Luminous Intensity (mcd) Min I F =20mA Typical Peak Wavelength (nm) Typical Viewing Angle (2Θ ½ ) Typical Forward Voltage (V) Typical I F =20mA Max Reverse Voltage (V), I R =100µA Min
10 5mm Integral Resistor Diffused * NOT A VALID PART NUMBER. THIS SHEET IS FOR REFERENCE ONLY. 5RD-xxxx TYPE COLOR VOLTS *5RD-9378 Green 12 *5RD *5RD-9422 Red 5 *5RD-9423 Green 5 ABSOLUTE IMUM RATINGS Green 12V 12V Red 5V Green 5V (T A =25 C) Forward Voltage (V) 1 5 * *(T A =70 C) Operating Temperature ( C) -20/+85-40/+85-40/+85-20/+85 Storage Temperature ( C) -55/ / / /+100 OPERATING CHARACTERISTICS Green 12V 12V Red 5V Green 5V (T A =25 C) Luminous Intensity (mcd) Min. 1.5* 1.5* 1 2 V F =5V, *V F =12V Typical 4* 4* 2 8 Peak Wavelength (nm) Typical Viewing Angle (2Θ ½ ) Typical Forward Current (ma), V F =5V Typical 13* 13* *V F =12V Max. 20* 20* Reverse Voltage (V), I R =100µA Typical
11 5mm Super Bright LED Diffused * NOT A VALID PART NUMBER. THIS SHEET IS FOR REFERENCE ONLY. TYPE *5SD-9441 *5SD-9455 *5SD-945 5SD-xxxx COLOR Red Green Red Green ABSOLUTE IMUM RATINGS (T A =25 C) Power Dissipation (mw) Forward Current (ma) Derating (ma/ C) From 50 C *(mw/ C) From 40 C.*.5.5 Peak Current (ma) Pulse width = 1 ms Operating Temperature ( C) -55/ / /+100 Storage Temperature ( C) -55/ / /+100 Red Green =25 C) Luminous Intensity (mcd) Min I F =20mA Typical Peak Wavelength (nm) Typical Viewing Angle (2Θ ½ ) Typical Forward Voltage (V) Typical I F =20mA Max Reverse Voltage (V), I R =10µA Min
550-xx mm LED CBI. Circuit Board Indicator Sloped Back Housing, Quad Block x x x 4
5.97 [.235] 3.0 [.118] 5mm LED CBI Circuit Board Indicator Sloped Back Housing, Quad Block 2.97 [.117] Features.35 [.250].35 [.250] 25 [.984] ID RECOMMENDED P.C. HOLE PATTERN 4.9 [.185] A Red Cathode for
More information550-xx07. 5mm LED CBI Circuit Board Indicator Sloped Back Housing with Standoffs x x Features
5mm LED CBI Circuit Board Indicator Sloped Back Housing with Standoffs 550-xx07.10 [.240] 3.0 [.118] 3.8 [.145].10 [.240] 4.83 [.190] Red Cathode for Red/Green Bi-Color Cathode for /Green Bi-Color 5.21
More information568-0x0x-xxx. 3mm LED CBI Circuit Board Indicator Quad-Level x 0 x - x x x
3mm LED CBI Circuit Board Indicator Quad-Level 568-0x0x-xxx 4.32 [.170] LED 2 LED 3 LED 4 0.51 [.020] LED 1 5.08 [.200] 5.08 [.200] 2,54 5.08 [.200] CATHODE ID 3,81 [.150] 10.54 [.415] 2,79 [.110] 1.91
More information3mm LED CBI Circuit Board Indicator.200 High LED Centerline 551-xx07
3mm LED CBI Circuit Board Indicator.200 High LED Centerline 551-xx07 7.11 [.280] 5.08 [.200] 1.09 [.043] 4.32 [.170].508 2.89 [.114] 3.68 [.145] CATHODE Red/Yel Cathode for Bi-color 6.35 [.250] 4.4 [.175]
More informationSubminiature LED Lamps. Technical Data. HLMP-Pxxx Series HLMP-Qxxx Series HLMP-6xxx Series HLMP-70xx Series
Subminiature LED Lamps Technical Data HLMP-Pxxx Series HLMP-Qxxx Series HLMP-6xxx Series HLMP-70xx Series Features Subminiature Flat Top Package Ideal for Backlighting and Light Piping Applications Subminiature
More informationFeatures. Red Green Yellow Orange Description
HDSM-431x/433x 0.39 (10.0mm) Single digit surface mount LED display Data Sheet Description This is 0.39 (10.0mm) height single digit display. This device utilizes AlInGaP / GaAs chips.this device is with
More informationLITE-ON TECHNOLOGY CORPORATION
Features * Designed for ease in circuit board assembly. * Black case enhance contrast ratio. * Solid state light source. * Reliable and rugged. Package Dimensions Lamp Part No. Lens Source Color LTL-10233WP
More informationSURFACE MOUNT LED RED/GREEN, 1210 PACKAGE
SURFACE MOUNT LED RED/GREEN, 1210 PACKAGE Industry Standard Package RoHS Compliant Two Chips in One Package Water Clear Lens Wide Viewing Angle Ideal for Status Indication and Lighting Bivar Surface Mount
More informationData Sheet. HLMP-Pxxx Series, HLMP-Qxxx Series HLMP-6xxx Series, HLMP-70xx Series Subminiature LED Lamps. Features. Description
HLMP-Pxxx Series, HLMP-Qxxx Series HLMP-6xxx Series, HLMP-70xx Series Subminiature LED Lamps Data Sheet Description Flat Top Package The HLMP-Pxxx Series flat top lamps use an untinted, nondiffused, truncated
More informationHDSM-431x/433x 0.39 (10.0mm) Single digit surface mount LED display. Features
HDSM-41x/4x.9 (1.mm) Single digit surface mount LED display Datasheet Description This is.9 (1.mm) height single digit display. This device utilizes AlInGaP / GaAs chips.this device is with top surface
More informationData Sheet. HLMP-Pxxx Subminiature LED Lamps. HLMP-Pxxx Series, HLMP-Qxxx Series HLMP-6xxx Series, HLMP-70xx Series
HLMP-Pxxx Subminiature LED Lamps Data Sheet HLMP-Pxxx Series, HLMP-Qxxx Series HLMP-6xxx Series, HLMP-70xx Series Description Flat Top Package The HLMP-Pxxx Series flat top lamps use an untinted, nondiffused,
More information3mm (T1) Package Discrete LED YELLOW/GREEN, Tri-Color Bi-Color
3mm (T1) Package Discrete LED YELLOW/GREEN, Tri-Color Bi-Color 3BC-3-Y/G-F Industry Standard 3mm (T1) Package RoHS Compliant White Diffused Lens Available in Flange (F) Style 3-Lead Bi-Color LED Ideal
More informationData Sheet. HDSM-541x, HDSM-543x 0.56 (14.22mm) Dual digit surface mount LED display. Description. Features. Package Dimensions. Ordering Information
HDSM-51x, HDSM-5x.56 (1.mm) Dual digit surface mount LED display Data Sheet Description The HDSM-51x/5x is a dual digit display of.56 (1.mm) height. This device utilizes AlInGaP / GaAs chips and has a
More informationData Sheet. HDSM-291x/293x (7.0mm) Dual digit surface mount LED display. Features. Description. Package Dimensions. Ordering Information
HDSM-91x/9x.8 (7.mm) Dual digit surface mount LED display Data Sheet Description The HDSM-91x/9x is a dual digit display of.8 (7.mm) height. This device utilizes AlInGaP / GaAs chips and has a grey surface
More information3mm (T1) Package Discrete LED YELLOW/GREEN, Bi-Color
3mm (T1) Package Discrete LED YELLOW/GREEN, Bi-Color 3SBCC-Y/G-X Industry Standard 3mm (T1) Package RoHS Compliant 2-Lead Super Bright Bi-Color LED Water Clear Lens Available in Flange (F) and Shouldered
More information3mm (T1) Package Discrete LED YELLOW/GREEN, Tri-Color Bi-Color
3mm (T1) Package Discrete LED YELLOW/GREEN, Tri-Color Bi-Color 3BC-3-Y/G-CA-F Industry Standard 3mm (T1) Package RoHS Compliant White Diffused Lens Available in Flange (F) Style 3-Lead Bi-Color LED Ideal
More information3mm 5mm (T1) ¾) Package Discrete LED
3mm 5mm (T1) ¾) Package Discrete LED LED AMBER/GREEN, YELLOW/GREEN, Tri-Color Bi-Color 5BC-3-Y/G-CA-X Industry Standard 5mm (T1 ¾) Package RoHS Compliant White Diffused Lens Available in Flange (F) Lead
More informationData Sheet. HLMP-D101/D105, HLMP-K101/K105 T-1 3 / 4 (5 mm), T-1 (3 mm), High Intensity, Double Heterojunction AlGaAs Red LED Lamps.
HLMP-D101/D105, HLMP-K101/K105 T-1 3 / 4 (5 mm), T-1 (3 mm), High Intensity, Double Heterojunction AlGaAs Red LED Lamps Data Sheet Description These solid state LED lamps utilize newly developed double
More informationData Sheet. HLMP-132x Series, HLMP-142x Series, HLMP-152x Series T-1 (3 mm) High Intensity LED Lamps. Features. Description. Package Dimensions
HLMP-132x Series, HLMP-142x Series, HLMP-152x Series T-1 (3 mm) High Intensity LED Lamps Data Sheet Description This family of T-1 lamps is specially designed for applications requiring higher on-axis
More informationData Sheet. HDSP-C1x1/C1x3 1.0 Single Digit PCB Based LED Display. Description. Features. Package Dimensions. Ordering Information
HDSP-Cx/Cx3. Single Digit PCB Based LED Display Data Sheet Description This is. height single digit display. It utilizes GaAsP/GaP Red, Orange, Yellow, Green and AlGaAs/GaAs Red chips. This device is halogenated.
More information3mm 5mm (T1) ¾) Package Discrete LED AMBER, YELLOW, Super Bright B
3mm 5mm (T1) ¾) Package Discrete AMBER, YELLOW, Super Bright B 5SYX-X Industry Standard 5mm (T1 ¾) Package RoHS Compliant Water Clear (C), Diffused (D), and Tinted (T) Lenses Available in Flange (F) and
More informationAgilent HDSP-311x/313x mm (0.4 inch) Single Digit General Purpose Seven Segment Display
Agilent HDSP-311x/313x.16 mm (.4 inch) Single Digit General Purpose Seven Segment Display Data Sheet Description This.16 mm (.4 inch) LED single digit seven segment display uses industry standard size
More informationData Sheet. HDSP-Ax11 Black Surface Seven Segment Displays
HDSP-Ax11 Black Surface Seven Segment Displays Data Sheet HDSP-AX11/-AX13 Series, HDSP-FX11/-FX13 Series HDSP-GX11/-GX13 Series, HDSP-HX11/-HX13 Series HDSP-KX11/-KX13 Series Description These devices
More informationRectangular Package Discrete LED RED/GREEN, 2 x 5 mm, Bi-Color
Rectangular Package Discrete LED RED/GREEN, 2 x 5 mm, Bi-Color Rectangular Package RoHS Compliant White Diffused Lens Available in Shouldered Lead Frame style 3-Lead Bi-Color LED Ideal for Status Indication
More information3mm 5mm (T1) ¾) Package Discrete LED
3mm 5mm (T1) ¾) Package Discrete LED LED AMBER/GREEN, RED/GREEN, Tri-Color Bi-Color 5BC-3-CA-X Industry Standard 5mm (T1 ¾) Package RoHS Compliant White Diffused Lens Available in Flange (F) and Shouldered
More informationQ6 series. Ø6 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING LED INDICATORS
IND-Q6-17-07 LED INDICATORS DISTINCTIVE FEATURES 3 mm colored diffused epoxy lens or 3 mm water clear super bright LEDs Prominent, recessed and flush bezel styles (2.0 x 0.5) solder lug terminals, pins
More informationHLMP-40xx, HLMP-08xx T-1 3/4, 2 mm x 5 mm Rectangular Bicolor LED Lamps. Features
HLMP-4xx, HLMP-8xx T-1 3/4, 2 mm x 5 mm Rectangular Bicolor LED Lamps Data Sheet Description The T-1 3/4 HLMP-4xx and 2 mm by 5 mm rectangular HLMP-8xx are three leaded bicolor light sources designed for
More informationData Sheet. HLMP-132x Series, HLMP-142x Series, HLMP-152x Series T-1 (3 mm) High Intensity LED Lamps. Features. Description.
HLMP-132x Series, HLMP-142x Series, HLMP-152x Series T-1 (3 mm) High Intensity LED Lamps Data Sheet Description This family of T-1 lamps is specially designed for applications requiring higher on-axis
More informationData Sheet. Description. Features. Devices
HDSP-AX11/-AX13 Series, HDSP-FX11/-FX13 Series HDSP-GX11/-GX13 Series, HDSP-HX11/-HX13 Series HDSP-KX11/-KX13 Series Black Surface Seven Segment Displays Data Sheet Description These devices use industry
More informationT-1 3 /4 (5 mm) Precision Optical Performance AlInGaP LED Lamps. Technical Data. SunPower Series HLMP-EG55 HLMP-EG57
T-1 3 /4 (5 mm) Precision Optical Performance AlInGaP LED Lamps Technical Data SunPower Series HLMP-EL55 HLMP-EL57 HLMP-EH55 HLMP-EH57 HLMP-EG55 HLMP-EG57 Features Well Defined and Smooth Spatial Radiation
More informationData Sheet. HDSP-511x/513x mm (0.56 inch) General Purpose Seven-Segment Display
HDSP-511x/513x 14.22 mm (.56 inch) General Purpose Seven-Segment Display Data Sheet Description This 14.22 mm (.56 inch) LED seven-segment display uses industry standard size package and pinout. The device
More informationData Sheet. HLMP-Yxxx. T-1 (3 mm) GaP/GaAsP LED Lamps. Description. Features. Applications. Package Dimension
HLMP-Yxxx T-1 (3 mm) GaP/GaAsP LED Lamps Data Sheet Description This family of T-1 lamps is widely used in general purpose indicator and back lighting applications. The optical design is balanced to yield
More information5mm (T1 ¾) Package Discrete LED RED
5mm (T1 ¾) Package Discrete RED 5HX-X Industry Standard 5mm (T1 ¾) Package RoHS Compliant Water Clear (C), Diffused (D), and Tinted (T) Lenses Available in Flange (F) and Standard (Blank) Lead Frame styles
More informationFeatures. Applications
HLMP-NS31 and HLMP-NM31 T-1 (3mm) InGaN LED Lamps Data Sheet Description These InGaN lamps are designed in industry standard package with clear and non-diffused optics. These lamps are ideal for use as
More informationThrough Hole Lamp Product Data Sheet LTL-4231N-002 Spec No.: DS Effective Date: 03/25/2000 LITE-ON DCC RELEASE
Through Hole Lamp Product Data Sheet LTL-4231N-002 Spec No.: DS20-2000-100 Effective Date: 03/25/2000 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien
More informationFeatures. Applications
ASMT-YTB0-0xxxx PLCC-6 Surface Mount Tricolor LED Data Sheet Description This family of Surface Mount Tricolor LEDs are housed in a PLCC-6 package. They are designed with a separate heat path for each
More informationKingbright. L-7104GO/1CGK1CGKSYKC T-1 (3mm) Bi-Level Circuit Board Indicator DESCRIPTIONS PACKAGE DIMENSIONS FEATURES APPLICATIONS ATTENTION
L-714GO/1CGK1CGKSYKC T-1 (3mm) Bi-Level Circuit Board Indicator DESCRIPTIONS The source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The device is made with AlGaInP (on GaAs
More informationT-13/4 (5 mm), Wide Viewing Angle, High Intensity LED Lamps Technical Data
H T-13/4 (5 mm), Wide Viewing Angle, High Intensity LED Lamps Technical Data HLMA-VH HLMA-VL HLMP-V1 HLMP-V5 Features Outstanding LED Material Efficiency Extremely Wide Horizontal Viewing Angle High Light
More information3mm 5mm (T1) ¾) Package Discrete LED
3mm 5mm (T1) ¾) Package Discrete AMBER, GREEN, TURQUOISE, YELLOW, BLUE, Ultra Low 5V Ultra Super Low Current Bright B 5BWD5V-X Industry Standard 5mm (T1 ¾) Package RoHS Compliant Diffused Lens Available
More information3mm (T1) Package Discrete LED YELLOW/GREEN, Bi-Color
3mm (T1) Package Discrete LED YELLOW/GREEN, Bi-Color 3BC-Y/G-X Industry Standard 3mm (T1) Package RoHS Compliant 2-Lead Bi-Color LED White Diffused Lens Available in Flange (F) and Shouldered (Blank) Lead
More informationSUBMINIATURE T-3/4 LED DIFFUSED AND CLEAR LAMPS
PACKAGE DIMENSIONS FEATURES Subminiature T-3/4 transfer molded.276 (7.0) MIN Low package profile Axial leads Wide viewing angle SMT versions.002 (.06).031 (.78).023 (.58).075 (1.9) DIA.056 (1.44).048 (1.24)
More informationData Sheet. HDSP-311x, HDSP- 313x mm (0.4 inch) Single Digit General Purpose Seven Segment Display. Features. Description. Applications.
HDSP-311x, HDSP- 313x 1.16 mm (.4 inch) Single Digit General Purpose Seven Segment Display Data Sheet Description This 1.16 mm (.4 inch) LED single digit seven segment display uses industry standard size
More informationFeatures. Applications SQUARE TYP (0.022) 0.40 (0.016) 0.65 (0.026) max CATHODE LEAD 25.40(1.00) MINIMUM 1.52 (.060) 1.02 (.
HLMP-D101/D105, HLMP-K101/K105 T-1 3 / 4 (5 mm), T-1 (3 mm), High Intensity, Double Heterojunction AlGaAs Red LED Lamps Data Sheet Description These solid-state LED lamps utilize newly developed double
More information3mm (T1) Package Discrete LED
3mm (T1) Package Discrete LED TURQUOISE, BLUE, AMBER, GREEN, YELLOW, Ultra Low 12V Ultra Super 5V Low Extended Current Profile B 3YX-201-X Industry Standard 3mm (T1) Package RoHS Compliant Water Clear
More informationPart No. Emitting Color Polarity. KW1-S281AAA Orange Common Anode. KW1-S281CAA Orange Common Cathode
Features.28inch (7.mm) digit height. The thickness is thinness than tradition display. Packaged in tape and reel for SMT manufacturing. Low current operation. Excellent characters appearance. Categorized
More informationTOYO LED ELECTRONICS LIMITED Room 1610, Hong Kong Plaza, 188 Connaught Road West, Hong Kong. Tel : (852)
PACKAGE DIMENSION INTERNAL CIRCUIT DIAGRAM NOTES: 1. All dimensions are in millimeter(inch); 2. Tolerance is ±0.25mm(0.01 ) especially other specified; 3. Pin length, housing color, marking no & circuit
More informationLIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only. SINGLE DIGIT LED DISPLAY (0.3 Inch) DATA SHEET LSD3021-XX REV. : A
SINGLE DIGIT LED DISPLAY (0.3 Inch) DATA SHEET DOC. NO : QW0905- REV. : A DATE : 23 - Dec. - 2005 Page 1/7 Package Dimensions PIN NO.1 A LIGITEK F G B E D C R.DP 7.62 (0.3") 19.0 (0.75") 2.54*6= 15.24(0.6")
More information10-Element Bar Graph Array. Technical Data HLCP-J100 HDSP-4820 HDSP-4830 HDSP-4832
-Element Bar Graph Array Technical Data HLCP-J HDSP-48 HDSP-483 HDSP-483 Features Custom Multicolor Array Capability Matched LEDs for Uniform Appearance End Stackable Package Interlock Ensures Correct
More information5mm (T1 ¾) Package Discrete LED AMBER
5mm (T1 ¾) Package Discrete LED 5AX-X Industry Standard 5mm (T1 ¾) Package RoHS Compliant Water Clear (C), Diffused (D), and Tinted (T) Lenses Available in Flange (F) and Standard (Blank) Lead Frame styles
More informationLTH3MM12V Series 3mm (T-1) Through Hole LED Built in Resistor for 12VDC
TM LTH3MM1V Series 3mm (T-1) Through Hole Built in Resistor for 1VDC LTH3MM1VFR4700 - Yellow Water-Clear T-1 (3 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 30 / 35 1 Volt MSL Applications Automotive
More information3mm (T1) Package Discrete LED
3mm (T1) Package Discrete LED AMBER, GREEN, TURQUOISE, YELLOW, BLUE, Low Ultra 5V Ultra Super Low Current Bright B 3BWD5V-X Industry Standard 3mm (T1) Package RoHS Compliant Diffused Lens Available in
More informationData Sheet. Description. Features. Applications
LED Light Bars HLCP-A100/-B100/-C100/D100/-E100/-F100/-G100/-H100 HLMP-2300/-2350/-2400/-2450/-2500/-2550 HLMP-2600/-2620/-2635/-2655/-2670/-2685 HLMP-2700/-2720/-2735/-2755/-2770/-2785 HLMP-2800/-2820/-2835/-2855/-2870/-2885
More informationHDSP-315x/316x/515x/516x Series 10 mm and 13 mm Slim Font Seven Segment Displays
HDSP-35x/3x/55x/5x Series mm and 3 mm Slim Font Seven Segment Displays Data Sheet Description The HDSP-3xx-5xx Series of displays incorporates a new slim font character design. This slim font features
More informationHDSP-4830/4840/4850, HDSP-4832/4836 & HLCP-J Element Bar Graph Array. Features
HDSP-//, HDSP-/ & HLCP-J -Element Bar Graph Array Data Sheet Description These -element LED arrays are designed to display information in easily recognizable bar graph form. The packages are end stackable
More information3mm (T1) Package Discrete LED
3mm (T1) Package Discrete LED AMBER, GREEN, YELLOW, ORANGE, Super Ultra Bright B 3SUOC-X Industry Standard 3mm (T1) Package RoHS Compliant Water Clear Lens Available in Flange (F) and Shouldered (S) Lead
More informationLTH3MM12V Series 3mm (T-1) Through Hole LED Built in Resistor for 12VDC
TM LTH3MM12V Series 3mm (T-1) Through Hole Built in Resistor for 12VDC LTH3MM12VFR4600 - Water-Clear T-1 (3 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 30 / 35 12 Volt Applications Automotive Indoor
More informationPLCC4 SMD Top View Package LED SMP4-RGB, RED/GREEN/BLUE
SMP4-RGB Industry Standard PLCC4 Footprint 3 Chips in One Low Profile Package High Luminous Intensity Wide Viewing Angle High Power Efficiency Bivar SMP4 Tri-Color LED combines three chips in a single
More information5mm (T1 ¾) Package Discrete LED RED
5mm (T1 ¾) Package Discrete RED 5RX-X Industry Standard 5mm (T1 ¾) Package RoHS Compliant Water Clear (C), Diffused (D), and Tinted (T) Lenses Available in Flange (F) and Standard (Blank) Lead Frame styles
More informationLTH5MM12V Series 5mm (T-1 3/4) Through Hole LED Built in Resistor for 12VDC
TM LTH5MM12V Series 5mm (T-1 3/4) Through Hole Built in Resistor for 12VDC LTH5MM12VFR4100 - Red Water-Clear T-1 3/4 (5 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 16 / 20 12 Volt Applications Automotive
More informationSURFACE MOUNT LED RED/GREEN/YELLOW, 1210 PACKAGE. Outline Dimensions SM1210RGY
SURFACE MOUNT LED RED/GREEN/YELLOW, 1210 PACKAGE Industry Standard Package RoHS Compliant Three Chips in One Package Water Clear Lens Wide Viewing Angle Ideal for Status Indication and Lighting Bivar Surface
More informationKingbright. L-130WCP/1MBN1XGW T-1 (3 mm) Bi-Level Circuit Board Indicator PACKAGE DIMENSIONS
L-1WCP/1MBN1XGW T-1 (3 mm) Bi-Level Circuit Board Indicator DESCRIPTIONS The source color devices are made with GaN on SiC Light Emitting Diode. The source color devices are made with Gallium Arsenide
More informationData Sheet. HLMP-331x, HLMP-341x, HLMP-351x Series T-1 3 / 4 (5 mm) High Intensity LED Lamps. Description. Features.
HLMP-331x, HLMP-341x, HLMP-351x Series T-1 3 / 4 (5 mm) High Intensity LED Lamps Data Sheet Description This family of T-1 3 / 4 nondiffused LED lamps is specially designed for applica tions requiring
More informationChip LEDs with reflectors
Chip LEDs with reflectors SML- Series SML- Series The SML- series are high luminance chip LEDs with reflectors. The compact and leadless design of these LEDs allows for high mounting density.!features
More information3mm (T1) Package Discrete LED
3mm (T1) Package Discrete LED AMBER, GREEN, YELLOW, ORANGE, Super Ultra Bright B 3UOC-X Industry Standard 3mm (T1) Package RoHS Compliant Water Clear Lens Available in Flange (F), Standard (Blank), and
More information3mm (T1) Package Discrete LED
3mm (T1) Package Discrete LED B 3SRX-X Industry Standard 3mm (T1) Package RoHS Compliant Water Clear (C), Diffused (D), and Tinted (T) Lenses Available in Flange (F) and Shouldered (S) Lead frame styles
More informationInolux 5mm Full-Color Through Hole Lamp HV-5RGBXX Series
Inolux HV-5RGBXX Series July 21, 2015 Version of 1.1 Page 1/11 DISCLAIMER INOLUX reserves the right to make changes without further notice to any products herein to improve reliability, function or design.
More information5mm (T1 ¾) Package Discrete LED GREEN
5mm (T1 ¾) Package Discrete GREEN 5GX-X Industry Standard 5mm (T1 ¾) Package RoHS Compliant Water Clear (C), Diffused (D), and Tinted (T) Lenses Available in Flange (F) and Standard (Blank) Lead Frame
More information3mm (T1) Package Discrete LED
3mm (T1) Package Discrete LED TURQUOISE, BLUE, YELLOW, AMBER, GREEN, Low Ultra 5V 12V Ultra Super Low Current Bright B 3GX12V-X Industry Standard 3mm (T1) Package RoHS Compliant Water Clear (C) and Diffused
More informationData Sheet. HLMP-1301, HLMP-1401, HLMP-1503, HLMP-K401, HLMP-K600 T-1 (3 mm) Diffused LED Lamps. Description. Features. Package Dimensions
HLMP-1301, HLMP-1401, HLMP-1503, HLMP-K401, HLMP-K600 T-1 (3 mm) Diffused LED Lamps Data Sheet Description This family of T-1 lamps is widely used in general purpose indicator applications. Diffusants,
More informationPeak. Wavelength λp(nm) TYP. Water Clear 20 3RD-F Red Diffused 35 3RT-F Red Tinted 20
3mm (T1) Package Discrete LED AMBER RED 3RX-X Industry Standard 3mm (T1) Package RoHS Compliant Water Clear (C), Diffused (D), and Tinted (T) Lenses Available in Flange (F) and Shouldered (S) Lead Frame
More informationAgilent HLMP-3301 T-1 3 / 4 (5 mm) Diffused LED Lamps
Agilent HLMP-3301 T-1 3 / 4 (5 mm) Diffused LED Lamps Data Sheet HLMP-3301, HLMP-3401, HLMP-3507, HLMP-3762, HLMP-3862, HLMP-3962, HLMP-D401 Description This family of T-1 3 / 4 tinted, diffused LED lamps
More information5mm (T1 ¾) Package Discrete LED GREEN
5mm (T1 ¾) Package Discrete GREEN 5PGX-X Industry Standard 5mm (T1 ¾) Package RoHS Compliant Water Clear (C), Diffused (D), and Tinted (T) Lenses Available in Flange (F) and Standard (Blank) Lead Frame
More informationAgilent 10-Element Bar Graph Array Data Sheet
Agilent -Element Bar Graph Array Data Sheet HLCP-J HDSP-8 HDSP-8 HDSP-8 Description These -element LED arrays are designed to display information in easily recognizable bar graph form. The packages are
More informationHDSP-U1xx Series 8 mm (0.31 inch) Ultra Mini Seven Segment Displays
HDSP-Uxx Series 8 mm (.3 inch) Ultra Mini Seven Segment Displays Data Sheet HDSP-Uxx/U2xx/U3xx/Uxx/U5xx Series Description The 8 mm (.3 inch) LED seven segment displays are Avago s most space-efficient
More informationLTH5MM12V Series 5mm (T-1 3/4) Through Hole LED Built in Resistor for 12VDC
TM LTH5MM12V Series 5mm (T-1 3/4) Through Hole Built in Resistor for 12VDC LTH5MM12VFR44 - White Water-Clear T-1 3/4 (5 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 16 / 2 12 Volt Applications Automotive
More informationSURFACE MOUNT LED ORANGE, 0603 PACKAGE
SURFACE MOUNT LED ORANGE, 0603 PACKAGE SM0603OC Industry Standard 0603 Package RoHS Compliant Small Package and Footprint Water Clear Lens Wide Viewing Angle Ideal for Status Indication, Display, and Backlighting
More information3mm 5mm (T1) ¾) Package Discrete LED
3mm 5mm (T1) ¾) Package Discrete LED LED 12V Ultra Super Low Current Bright B 5GX12V-X Industry Standard 5mm (T1 ¾) Package RoHS Compliant Water Clear (C) and Diffused (D) Lenses Available in Flange (F)
More informationDATA SHEET PART NO. : L-C150GCT REV : A / 0
PARA LIGHT ELECTRONICS CO., LTD. 4F, No.1, Lane 93, Chien Yi Road, Chung Ho City, Taipei, Taiwan, R.O.C. Tel: 886-2-2225-3733 Fax: 886-2-2225-4800 E-mail: para@para.com.tw http://www.para.com.tw DATA SHEET
More informationChip LEDs with reflectors
Chip LEDs with reflectors SML- Series SML- Series The SML- series are high luminance chip LEDs with reflectors. The compact and leadless design of these LEDs allows for high mounting density.!features
More informationDescription. Kingbright
T-1 (3mm) RIGHT ANGLE LED INDICATOR Part Number: L-710A8CB/1GD Green Features Pre-trimmed leads for pc mounting. Black case enhances contrast ratio. Wide viewing angle. High reliability life measured in
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Features Side view LED. Lead frame package with individual 2 pins. Wide viewing angle. Soldering methods: IR reflow soldering. Pb-free. The product itself will remain within RoHS compliant version. Descriptions
More informationOutline Dimensions. Luminous Intensity (mcd) TYP. Lens Appearance. Chromaticity Coordinates. Part Number Material Emitted Color.
Industry Standard 0603 Package RoHS Compliant Small Package and Footprint Diffused Lens Wide Viewing Angle Ideal for Status Indication, Display, and Backlighting Bivar Surface Mount 0603 package LED may
More informationMEI. Features: Descriptions: Applications:
Features: Low Power consumption. High efficiency and low cost. Good control and free combinations on the colors of LED lamps. Good lock and easy to assembly. Stackable and easy to assembly. Stackable vertically
More informationFeatures. HER Green AlGaAs Red Yellow Description
HDSP-331x/332E/333x/334x Series 7.62 mm (.3 inch) General Purpose Seven-Segment Display Data Sheet Description This 7.62 mm (.3 inch) LED seven-segment display uses industry standard size package and pinout.
More information6300T Series 3mm (T-1) LED SMD Right Angle Circuit Board Indicator
TM 6300T Series 3mm (T-1) LED SMD Right Angle Circuit Board Indicator 6300T5 - Green Single level Surface Mount CBI, available in five different LED colors LONG LIFE LED Applications Industrial Infrastructure
More information0805 PACKAGE CHIP LED TSP2-XF2012A3
0805 Package Chip LED Features Package in 8mm tape on 7 diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow solder process Mono-color type RoHS compliance
More informationHDSP-740x Series 7.6 mm (0.3 inch) Micro Bright Seven Segment Displays. Features. Green [1]
HDSP-74x Series 7.6 mm (.3 inch) Micro Bright Seven Segment Displays Data Sheet HDSP-74x Series, HDSP-75x Series, HDSP-78x Series, HDSP-A5x Series, HDSP-A4x Series Description The 7.6 mm (.3 inch) LED
More informationDescription. Kingbright
3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: Super Bright Orange Features 3.0mmx1.0mm right angle SMD LED, 2.0mm thickness. Low power consumption. Wide viewing angle. Ideal for back light and
More information1.00 INCH SINGLE DIGIT DISPLAY A-1001SR REV:A / 1
PACKAGE DIMENSIONS NOTES : 1. All dimensions are in millimeters. (inches) 2. Tolerance is ± 0.25(0.010") unless otherwise specified. 3. We would like to offer you samples and mass production after you
More informationPeak. Wavelength λp(nm) TYP. Water Clear 20 3GD-F Green Diffused 35 3GT-F Green Tinted 20 3GC Water Clear 30
3mm (T1) Package Discrete LED AMBER GREEN 3GX-X Industry Standard 3mm (T1) Package RoHS Compliant Water Clear (C), Diffused (D), and Tinted (T) Lenses Available in Flange (F), Standard (Blank), and Shouldered
More informationSPEC NO: DSAF1859 REV NO: V.9B DATE: APR/14/2015 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:
T-1 (3mm) RIGHT ANGLE LED INDICATOR Part Number: WP934RS/GD Green Features Pre-trimmed leads for pc mounting. Pillars are designed for positioning the housing on P.C. board. Black case enhances contrast
More informationSURFACE MOUNT DEVICE LED Part No. : L-C150GCT-U1 REV:A / 0
PACKAGE OUTLINE DIMENSIONS BACK VIEW TOP VIEW SIDE VIEW 1.60 MOLDING BODY (LENS) 0.55 LED DICE POLARITY SOLDERING TERMINAL 3.20 CATHODE 5.00 P.C BOARD Notes: 1. All dimensions are in millimeters. 2. Tolerance
More information6300T Series 3mm (T-1) LED SMD Right Angle Circuit Board Indicator
TM 63T Series 3mm (T-1) LED SMD Right Angle Circuit Board Indicator 63T75 - /Green Single level Surface Mount CBI, available in five different LED colors LONG LIFE LED Applications Industrial Infrastructure
More information3mm (T1) Package Discrete LED
3mm (T1) Package Discrete LED TURQUOISE, BLUE, YELLOW, AMBER, GREEN, Ultra Low Low 12V Ultra Super 5V Low Extended Profile B 3GDL-201-X Industry Standard 3mm (T1) Package RoHS Compliant Diffused Lens Extended
More informationDescriptions. Kingbright
T-1(3mm) BI-COLOR INDICATOR LAMP Part Number: L-3VEYW Features Uniform light output. Low power consumption. 3 leads with one common lead. Long life - solid state reliability. RoHS compliant. Descriptions
More informationHDSP- HDSP- HDSP- HDSP-
mm and 3 mm Slim Font Seven Segment Displays Technical Data HDSP-35x Series HDSP-3x Series HDSP-55x Series HDSP-5x Series Features Excellent Appearance Slim Font Design Mitered Corners, Evenly Illuminated
More informationApplications Backlight and Indicator. Package Dimensions. Notes: FSL B-FAT5NC3
Features 1.6mm*0.8mm SMT LED, Super thin (0.4H mm) Low Power Consumption Wide Viewing Angle Various Colors Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
More informationApplications General Purpose Consumer Goods Indicator Lights
High Intensity AlInGaP LED Lamps Technical Data HP SunPower Series HLMP-WLXX HLMP-NL6 HLMP-WHXX HLMP-NH4 HLMP-WGXX HLMP-NG7 Features T-1 (3 mm) and T-1 3/4 (5 mm) General Purpose LED Lamps AlInGaP SunPower
More information3mm (T1) Package Discrete LED
3mm (T1) Package Discrete LED B 3SRX-X Industry Standard 3mm (T1) Package RoHS Compliant Water Clear (C), Diffused (D), and Tinted (T) Lenses Available in Flange (F), Standard (Blank), and Shouldered (S)
More informationPart Number Material Emitted Color Color Temperature Lens Appearance Viewing Angle
5mm (T1 3/4) ¾) Package Package Discrete Discrete YELLOW NEUTRAL WHITE 5UWCXX.XXXN-X Industry Standard 5mm (T1 3/4) Package RoHS Compliant Water Clear Lens 5000K Color Temperature Multiple Intensity and
More information