High Light Output High Peak Current Excellent for Long Digit String Multiplexing Intensity and Color Selection Option

Size: px

Start display at page:

Download "High Light Output High Peak Current Excellent for Long Digit String Multiplexing Intensity and Color Selection Option"

Jonas Ryan
6 years ago
Views:

8 mm (.3 inch) Ultra Mini Seven Segment Displays Technical Data HDSP-Uxx Series HDSP-U2xx Series HDSP-U3xx Series HDSP-U4xx Series HDSP-U5xx Series Features Compact Package 8 mm (.

1 8 mm (.3 inch) Ultra Mini Seven Segment Displays Technical Data HDSP-Uxx Series HDSP-U2xx Series HDSP-U3xx Series HDSP-U4xx Series HDSP-U5xx Series Features Compact Package 8 mm (.3 inch) Character Height Choice of Colors Wide Range of Colors Excellent Appearance Evenly Lighted Segments Mitered Corners on Segments Gray/Black Surface Gives Optimum Contrast ± 5 Viewing Angle Design Flexibility Common Anode or Common Cathode Right Hand Decimal Point Categorized for Luminous Intensity Yellow and Green also Categorized for Color Use of Like Categories Yields a Uniform Display High Light Output High Peak Current Excellent for Long Digit String Multiplexing Intensity and Color Selection Option Description The 8 mm (.3 inch) LED seven segment displays are Agilent s most space-efficient character size. They are designed for viewing distances up to 3 metres ( feet). The numeric devices feature a right hand decimal point. All devices are available as either common anode or common cathode. Typical applications include appliances, temperature controllers, and digital panel meters. Devices AlGaAs Red HER Orange Yellow Green Circuit HDSP- HDSP- HDSP- HDSP- HDSP- Description Diagram U U2 U4 U3 U5 Common Anode, Right A Hand Decimal, Gray Surface U3 U23 U43 U33 U53 Common Cathode, Right B Hand Decimal, Gray Surface U U2 U4 U3 U5 Common Anode, Right A Hand Decimal, Black Surface U3 U23 U43 U33 U53 Common Cathode, Right B Hand Decimal, Black Surface

2 2 Part Numbering System x xx x - x x x xx HDSP - x xx x - x x x xx Mechanical Options [] : No mechanical option 36: Special dimensional tolerances Color Bin Options [,2] : No color bin limitation Maximum Intensity Bin [,2] : No maximum intensity bin limitation Minimum Intensity Bin [,2] : No minimum intensity bin limitation Device Configuration/Color [] : Common Anode 3: Common Cathode Device Specific Configuration [] Refer to respective data sheet Package [] U: 8 mm (.3 inch) Ultra Mini Single Digit Seven Segment Display Notes:. For codes not listed in the figure above, please refer to the respective data sheet or contact your nearest Agilent representative for details. 2. Bin options refer to shippable bins for a part-number. Color and Intensity Bins are typically restricted to bin per tube (exceptions may apply). Please refer to respective data sheet for specific bin limit information.

3 3 Package Dimensions. (.39) LUMINOUS INTENSITY CATEGORY COLOR BIN NOTE NO. 3.5 (.2) 8. (.35) a 2 f b 9 3 g 8 4 e c DP d (.27). ±.2 (.433 ±.8) HDSP-XXXX XYY ZW 8. (.35) 2. (.79) 4. (.57) 2.5 (.98) 2. (.79).7 (.28) 5. (.97) DATE CODE 4.5 MIN. (.77) 7. (.28) MAX. NOTES:. ALL DIMENSIONS IN MILLIMETERS (INCHES). 2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY. 3. FOR YELLOW AND GREEN SERIES PRODUCT ONLY..25 (.) 5.3 (.29) Internal Circuit Diagram A B FUNCTION PIN A B CATHODE a CATHODE f CATHODE g CATHODE e CATHODE d CATHODE DP ANODE DP CATHODE c ANODE CATHODE b ANODE a ANODE f ANODE g ANODE e ANODE d CATHODE DP ANODE DP ANODE c CATHODE ANODE b HDSP-UXXX CIRCUIT

4 4 Absolute Maximum Ratings AlGaAs Red HER/Orange Yellow Green HDSP- HDSP- HDSP- HDSP- Uxx U2xx/-4xx U3xx U5xx Description Series Series Series Series Units Average Power per Segment or DP mw Peak Forward Current per 45 [] 9 [3] 6 [5] 9 [7] ma Segment or DP DC Forward Current per Segment 5 [2] 3 [4] 2 [6] 3 [8] ma or DP Operating Temperature Range 2 to to +9 C Storage Temperature Range 3 to +9 C Reverse Voltage per Segment or DP 3. V Wavesoldering Temperature for 25 C 3 Seconds (.6 mm [.63 in.] below body) Notes:. See Figure to establish pulsed conditions. 2. No derating over specified temperature range. 3. See Figure 5 to establish pulsed conditions. 4. Derate above 53 C at.45 ma/ C (see Figure 8). 5. See Figure 6 to establish pulsed conditions. 6. Derate above 8 C at.52 ma/ C (see Figure 8). 7. See Figure 7 to establish pulsed conditions. 8. Derate above 39 C at.37 ma/ C (see Figure 8). Electrical/Optical Characteristics at T A = 25 C AlGaAs Red Device Test Series Parameter Symbol Min. Typ. Max. Units Conditions HDSP- Luminous Intensity/Segment [,2] I V 35 6 µcd I F = ma Uxx (Digit Average) 36 I F = 5 ma Forward Voltage/Segment or DP V F.6 I F = ma.7 V I F = 5 ma I F = 2 ma Peak Wavelength λ PEAK 645 nm Dominant Wavelength [3] λ d 637 nm Reverse Voltage/Segment or DP [4] V R 3. 5 V I R = µa Temperature Coefficient of V F / C -2 mv/ C V F /Segment or DP Thermal Resistance LED Rθ J-Pin 255 C/W/ Junction-to-Pin Seg

5 5 Electrical/Optical Characteristics at T A = 25 C, continued High Efficiency Red Device Test Series Parameter Symbol Min. Typ. Max. Units Conditions HDSP- Luminous Intensity/Segment [,2] I V µcd I F = 5 ma U2xx (Digit Average) 539 I F = 2 ma Forward Voltage/Segment or DP V F V I F = 2 ma Peak Wavelength λ PEAK 635 nm Dominant Wavelength [3] λ d 626 nm Reverse Voltage/Segment or DP [4] V R 3. 3 V I R = µa Temperature Coefficient of V F / C -2 mv/ C V F /Segment or DP Thermal Resistance LED Rθ J-Pin 2 C/W/ Junction-to-Pin Seg Orange Device Test Series Parameter Symbol Min. Typ. Max. Units Conditions HDSP- Luminous Intensity/Segment [,2] I V µcd I F = 5 ma U4xx (Digit Average) 539 I F = 2 ma Forward Voltage/Segment or DP V F V I F = 2 ma Peak Wavelength λ PEAK 6 nm Dominant Wavelength [3] λ d 63 nm Reverse Voltage/Segment or DP [4] V R 3. 3 V I R = µa Temperature Coefficient of V F / C -2 mv/ C V F /Segment or DP Thermal Resistance LED Rθ J-Pin 2 C/W/ Junction-to-Pin Seg

6 6 Yellow Device Test Series Parameter Symbol Min. Typ. Max. Units Conditions HDSP- Luminous Intensity/Segment [,2] I V µcd I F = 5 ma U3xx (Digit Average) 274 I F = 2 ma Forward Voltage/Segment or DP V F V I F = 2 ma Peak Wavelength λ PEAK 583 nm Dominant Wavelength [3,5] λ d nm Reverse Voltage/Segment or DP [4] V R V I R = µa Temperature Coefficient of V F / C -2 mv/ C V F /Segment or DP Thermal Resistance LED Rθ J-Pin 2 C/W/ Junction-to-Pin Seg High Performance Green Device Test Series Parameter Symbol Min. Typ. Max. Units Conditions HDSP- Luminous Intensity/Segment [,2] I V 86 3 µcd I F = ma U5xx (Digit Average) 68 I F = 2 ma Forward Voltage/Segment or DP V F V I F = ma Peak Wavelength λ PEAK 566 nm Dominant Wavelength [3,5] λ d 57 nm Reverse Voltage/Segment or DP [4] V R V I R = µa Temperature Coefficient of V F / C -2 mv/ C V F /Segment or DP Thermal Resistance LED Rθ J-Pin 2 C/W/ Junction-to-Pin Seg Notes:. Case temperature of device immediately prior to the intensity measurement is 25 C. 2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 3. The dominant wavelength, λ d, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. 4. Typical specification for reference only. Do not exceed absolute maximum ratings. 5. The Yellow (HDSP-U3XX) series and Green (HDSP-U5XX) series displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter.

7 7 AlGaAs Red RATIO OF MAXIMUM OPERATING PEAK CURRENT TO TEMPERATURE DERATED MAXIMUM DC CURRENT OPERATION IN THIS REGION REQUIRES TEMPERATURE OPERATING OF IDC MAXIMUM I F PEAK I DC MAX Hz 3 Hz KHz 3 KHz KHZ DC OPERATION t PULSE DURATION µs P Figure. Maximum Tolerable Peak Current vs. Pulse Duration AlGaAs Red. I F FORWARD CURRENT PER SEGMENT ma AlGaAs RED RELATIVE LUMINOUS INTENSITY (NORMALIZED TO AT 2 ma) AlGaAs RED V F FORWARD VOLTAGE V I F FORWARD CURRENT PER SEGMENT ma Figure 2. Forward Current vs. Forward Voltage. Figure 3. Relative Luminous Intensity vs. DC Forward Current. η PEAK NORMALIZED RELATIVE EFFICIENCY (NORMALIZED TO AT 2 ma) AlGaAs RED I PEAK PEAK FORWARD CURRENT PER SEGMENT ma 5. Figure 4. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.

8 8 HER, Orange, Yellow, Green RATIO OF MAXIMUM OPERATING PEAK CURRENT TO TEMPERATURE DERATED DC CURRENT I F PEAK I DC MAX KHZ 3 KHz 3 Hz KHz Hz OPERATION IN THIS REGION REQUIRES TEMPERATURE OPERATING OF IDC MAXIMUM DC OPERATION RATIO OF MAXIMUM OPERATING PEAK CURRENT TO TEMPERATURE DERATED DC CURRENT I F PEAK I DC MAX KHZ 3 KHz 3 Hz KHz Hz OPERATION IN THIS REGION REQUIRES TEMPERATURE OPERATING OF IDC MAXIMUM DC OPERATION t PULSE DURATION µs P t PULSE DURATION µs P Figure 5. Maximum Tolerable Peak Current vs. Pulse Duration HER, Orange. Figure 6. Maximum Tolerable Peak Current vs. Pulse Duration Yellow. RATIO OF MAXIMUM OPERATING PEAK CURRENT TO TEMPERATURE DERATED DC CURRENT I F PEAK I DC MAX Hz 3 Hz KHz 3 KHz KHZ OPERATION IN THIS REGION REQUIRES TEMPERATURE OPERATING OF IDC MAXIMUM DC OPERATION I DC MAX MAXIMUM DC CURRENT PER SEGMENT ma GREEN R θ = 77 C/W J-A HER/ORANGE YELLOW t PULSE DURATION µs P T AMBIENT TEMPERATURE C A Figure 7. Maximum Tolerable Peak Current vs. Pulse Duration Green. Figure 8. Maximum Allowable DC Current vs. Ambient Temperature. I FORWARD CURRENT PER SEGMENT ma F 8 6 YELLOW 4 HER/ORANGE 2 GREEN η PEAK RELATIVE LUMINOUS INTENSITY (NORMALIZED TO AT 5 ma FOR HER AND YELLOW AND TO AT ma FOR GREEN) HER/ORANGE YELLOW GREEN η PEAK RELATIVE EFFICIENCY (NORMALIZED TO AT 5 ma FOR HER, ORANGE AND YELLOW, AND ma FOR GREEN) YELLOW GREEN HER/ORANGE V F FORWARD VOLTAGE V I FORWARD CURRENT PER SEGMENT ma F I PEAK PEAK FORWARD CURRENT PER SEGMENT ma Figure 9. Forward Current vs. Forward Voltage Characteristics. Figure. Relative Luminous Intensity vs. DC Forward Current. Figure. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.

9 9 Intensity Bin Limits (mcd) AlGaAs Red HDSP-Uxx IV Bin Category Min. Max. E F G.62.6 H I J K L HER HDSP-U2xx IV Bin Category Min. Max. B C D E F G H Orange HDSP-U4xx IV Bin Category Min. Max. C D E F G H I J K L M N

10 Yellow HDSP-U3xx IV Bin Category Min. Max. B C D E.74.3 F G H Green HDSP-U5xx IV Bin Category Min. Max. H I J K L Electrical/Optical For more information on electrical/optical characteristics, please see Application Note 5. Contrast Enhancement For information on contrast enhancement, please see Application Note 5. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating materials used to form the package of plastic LED parts. For more information on soldering LEDs, please refer to Application Note 27. Color Categories Dominant Wavelength (nm) Color Bin Min. Max. Yellow Green Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representatives for further clarification/information.

11 For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: + (8) or (96) Europe: +49 () China: Hong Kong: (+65) India, Australia, New Zealand: (+65) Japan: (+8 3) (Domestic/International), or (Domestic Only) Korea: (+65) Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) Taiwan: (+65) Data subject to change. Copyright 24 Agilent Technologies, Inc. Obsoletes E July 2, EN

HDSP-U1xx Series 8 mm (0.31 inch) Ultra Mini Seven Segment Displays

HDSP-U1xx Series 8 mm (0.31 inch) Ultra Mini Seven Segment Displays HDSP-Uxx Series 8 mm (.3 inch) Ultra Mini Seven Segment Displays Data Sheet HDSP-Uxx/U2xx/U3xx/Uxx/U5xx Series Description The 8 mm (.3 inch) LED seven segment displays are Avago s most space-efficient