Standard 7-Segment Display 7 mm

Size: px

Start display at page:

Download "Standard 7-Segment Display 7 mm"

Lynette Neal
5 years ago
Views:

1 TDSG5, TDSG6, TDSO5, TDSO6, TDSY5, TDSY6 Standard 7-Segment Display 7 mm DESCRIPTION 9235 The TDS... series are 7 mm character seven segment LED displays in a very compact package. The displays are designed for a viewing distance up to 3 m and available in four bright colors. The grey package surface and the evenly lighted untinted segments provide an optimum on-off contrast. All displays are categorized in luminous intensity groups. That allows users to assemble displays with uniform appearence. Typical applications include instruments, panel meters, point-of-sale terminals and household equipment. FEATURES Evenly lighted segments Grey package surface Untinted segments Luminous intensity categorized Yellow and green categorized for color Wide viewing angle Suitable for DC and high peak current Compliant to RoHS Directive 2/65/EU and in accordance to WEEE 22/96/EC APPLICATIONS Panel meters Test- and measure- equipment Point-of-sale terminals Control units PRODUCT GROUP AND PACKAGE DATA Product group: display Package: 7 mm Product series: standard Angle of half intensity: ± 5 PARTS TABLE PART COLOR LUMINOUS INTENSITY AT ma CIRCUITRY TDSO5 Orange red I V = 3 μcd (typ.) Common anode TDSO5-K Orange red I V = (8 to 36) μcd Common anode TDSO6 Orange red I V = 3 μcd (typ.) Common cathode TDSO6-K Orange red I V = (8 to 36) μcd Common cathode TDSO6-KL Orange red I V = (8 to 56) μcd Common cathode TDSY5 Yellow I V = 3 μcd (typ.) Common anode TDSY5-K Yellow I V = (8 to 36) μcd Common anode TDSY5-KL Yellow I V = (8 to 56) μcd Common anode TDSY6 Yellow I V = 3 μcd (typ.) Common cathode TDSG5 Green I V = 6 μcd (typ.) Common anode TDSG5-LM Green I V = (28 to 9) μcd Common anode TDSG6 Green I V = 6 μcd (typ.) Common cathode TDSG6-LM Green I V = (28 to 9) μcd Common cathode Rev..8, 7-Feb-2 Document Number: 8324 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

2 TDSG5, TDSG6, TDSO5, TDSO6, TDSY5, TDSY6 ABSOLUTE MAXIMUM RATINGS (T amb = 25 C, unless otherwise specified) TDSO5, TDSO6, TDSY5, TDSY6, TDSG5, TDSG6 PARAMETER TEST CONDITION SYMBOL VALUE UNIT Reverse voltage per segment or DP V R 6 V TDSO5 7 TDSO6 7 DC forward current per segment or DP TDSY5 7 I F TDSY6 7 ma TDSG5 7 TDSG6 7 TDSO5.5 TDSO6.5 Surge forward current per segment TDSY5.5 t or DP p μs (non repetitive) I FSM TDSY6.5 A TDSG5.5 TDSG6.5 Power dissipation T amb 45 C P V 4 mw Junction temperature T TDSO5, j C Operating temperature range TDSO6, T amb - 4 to + 85 C Storage temperature range TDSY5, T stg - 4 to + 85 C TDSY6, t 3 s, Soldering temperature TDSG5, T 2 mm below seating plane sd 26 C TDSG6 Thermal resistance LED junction/ambient R thja 4 K/W OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TDSO5, TDSO5-K, TDSO6, TDSO6-K, TDSO6-KL, ORANGE RED PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT TDSO TDSO5-K 8-36 Luminous intensity per segment (digit average) () I F = ma TDSO6 I V μcd TDSO6-K 8-36 TDSO6-KL 8-56 Dominant wavelength I F = ma λ d nm TDSO5, Peak wavelength I F = ma TDSO5-K, λ p nm Angle of half intensity I F = ma TDSO6, j - ± 5 - deg Forward voltage per segment or DP I TDSO6-K, F = 2 ma V F V TDSO6-KL Reverse voltage per segment or DP I R = μa V R V Note () I Vmin. and I V groups are mean values of all segments (a to g, D to D4), matching factor within segments is 3.5, excluding decimal points and colon. Rev..8, 7-Feb-2 2 Document Number: 8324 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

3 TDSG5, TDSG6, TDSO5, TDSO6, TDSY5, TDSY6 OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TDSY5, TDSY5-K, TDSY5-KL, TDSO6, YELLOW PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT TDSY Luminous intensity per segment TDSY5-K 8-36 (digit average) () I F = ma I V TDSY5-KL 8-56 μcd TDSY Dominant wavelength I F = ma λ d nm Peak wavelength I F = ma TDSY5, λ p nm Angle of half intensity I F = ma TDSY5-K, TDSY5-KL. j - ± 5 - deg Forward voltage per segment or DP I F = 2 ma TDSY6 V F V Reverse voltage per segment or DP I R = μa V R V Note () I Vmin. and I V groups are mean values of all segments (a to g, D to D4), matching factor within segments is 3.5, excluding decimal points and colon. OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TDSG5, TDSG5-LM, TDSG6, GREEN PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT TDSG Luminous intensity per segment TDSG5-LM 28-9 (digit average) () I F = ma I V TDSG μcd TDSG6-LM 28-9 Dominant wavelength I F = ma λ d nm Peak wavelength I F = ma TDSG5, λ p nm Angle of half intensity I F = ma TDSG5-LM, TDSG6, j - ± 5 - deg Forward voltage per segment or DP I F = 2 ma TDSG6-LM V F V Reverse voltage per segment or DP I R = μa V R V Note () I Vmin. and I V groups are mean values of all segments (a to g, D to D4), matching factor within segments is 3.5, excluding decimal points and colon. LUMINOUS INTENSITY CLASSIFICATION GROUP LIGHT INTENSITY (μcd) STANDARD MIN. MAX. E 8 36 F G 45 9 H 7 4 I 22 K 8 36 L M 45 9 N 7 4 Note The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped in one tube (there will be no mixing of two groups in one tube). In order to ensure availability, single brightness groups will not be orderable. COLOR CLASSIFICATION GROUP ORANGE RED YELLOW GREEN MIN. MAX. MIN. MAX. MIN. MAX Note Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of ± nm. Rev..8, 7-Feb-2 3 Document Number: 8324 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

4 TDSG5, TDSG6, TDSO5, TDSO6, TDSY5, TDSY6 TYPICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) I F - Forward Current (ma) I Vrel - Relative Luminous Intensity Orange Red I F =ma T amb - Ambient Temperature ( C) Fig. - Forward Current vs. Ambient Temperature T amb - Ambient Temperature ( C) Fig. 4 - Rel. Luminous Intensity vs. Ambient Temperature I V rel - Relative Luminous Intensity Fig. 2 - Rel. Luminous Intensity vs. Angular Displacement ϕ - Angular Displacement I V rel - Specific Luminous Intensity Orange Red.4 I FAV = ma, const I F (ma) t p /T Fig. 5 - Rel. Lumin. Intensity vs. Forward Current/Duty Cycle I - Forward Current (ma) F. Orange Red 2 t p /T=. t p =µs 8794 V F - Forward Voltage (V) 4 Fig. 3 - Forward Current vs. Forward Voltage 6 8 I V rel - Relative Luminous Intensity Orange Red. I F - Forward Current (ma) Fig. 6 - Relative Luminous Intensity vs. Forward Current Rev..8, 7-Feb-2 4 Document Number: 8324 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

5 TDSG5, TDSG6, TDSO5, TDSO6, TDSY5, TDSY6 I rel - Relative Intensity Orange Red λ - Wavelength (nm) 69 I spec - Specific Luminous Intensity yellow I F (ma) t p /T Fig. 7 - Relative Intensity vs. Wavelength Fig. - Rel. Lumin. Intensity vs. Forward Current/Duty Cycle I F - Forward Current (ma). yellow V F - Forward Voltage (V) 4 6 t p /T =. t p = µs 8 I V rel - Relative Luminous Intensity yellow I F - Forward Current (ma) Fig. 8 - Forward Current vs. Forward Voltage Fig. - Relative Luminous Intensity vs. Forward Current I V rel - Relative Luminous Intensity yellow I F = ma T amb - Ambient Temperature ( C) I rel - Relative Intensity yellow λ - Wavelength (nm) 65 Fig. 9 - Rel. Luminous Intensity vs. Ambient Temperature Fig. 2 - Relative Intensity vs. Wavelength Rev..8, 7-Feb-2 5 Document Number: 8324 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

6 TDSG5, TDSG6, TDSO5, TDSO6, TDSY5, TDSY6 I F - Forward Current (ma). green V F - Forward Voltage (V) 4 6 t p /T =. t p = µs 8 I V rel - Relative Luminous Intensity green I F - Forward Current (ma) Fig. 3 - Forward Current vs. Forward Voltage Fig. 6 - Relative Luminous Intensity vs. Forward Current I V rel - Relative Luminous Intensity green I F = ma T amb - Ambient Temperature ( C) I rel - Relative Intensity green λ - Wavelength (nm) 62 Fig. 4 - Rel. Luminous Intensity vs. Ambient Temperature Fig. 7 - Relative Intensity vs. Wavelength I spec - Specific Luminous Intensity green I F (ma) t p /T Fig. 5 - Specific Luminous Intensity vs. Forward Current a f b g e c d DP Fig. 8 - TDS... e 2 d 3 A ( C ) 4 c 5 DP 6 b 7 a 8 A ( C ) 9 g f Rev..8, 7-Feb-2 6 Document Number: 8324 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

7 TDSG5, TDSG6, TDSO5, TDSO6, TDSY5, TDSY6 PACKAGE DIMENSIONS FOR TDS... in millimeters Drawing-No.: Issue: ; Rev..8, 7-Feb-2 7 Document Number: 8324 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

8 VISHAY Display-7 mm Display-7 mm Package Dimensions in mm Document Number Rev.., 8-Mar-4

9 Display-7 mm VISHAY Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (987) and its London Amendments (99) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents.. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 99 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/54/EEC and 9/69/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use products for any unintended or unauthorized application, the buyer shall indemnify against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-7425 Heilbronn, Germany Telephone: 49 () , Fax number: 49 () Document Number Rev.., 8-Mar-4

10 VISHAY Pin Connections 7 mm Pin Connections 7 mm a f b g e c d DP e 2 d 3 A(C) 4 c 5 DP 6 b 7 a 8 A(C) 9 g f Document Number Rev.., 7-Jul-4

11 Pin Connections 7 mm VISHAY Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (987) and its London Amendments (99) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents.. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 99 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/54/EEC and 9/69/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use products for any unintended or unauthorized application, the buyer shall indemnify against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-7425 Heilbronn, Germany Telephone: 49 () , Fax number: 49 () Document Number Rev.., 7-Jul-4

12 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2/65/EU of The European Parliament and of the Council of June 8, 2 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 22/95/EC. We confirm that all the products identified as being compliant to Directive 22/95/EC conform to Directive 2/65/EU. Revision: 2-Mar-2 Document Number: 9

Standard 7-Segment Display 13 mm

Standard 7-Segment Display 13 mm TDSG55, TDSG56, TDSO55, TDSO56, TDSY55, TDSY56 Standard 7-Segment Display 3 mm DESCRIPTION 9237 The TDS.5.. series are 3 mm character seven segment LED displays in a very compact package. The displays