Standards. Category 1.2A 1.4A 3A 6A ( ) 1 x 10 7 operations with no electrical load. M20 or 1/2 inch NPT 2xM5 Any position Red
|
|
|
- Theodore Hall
- 6 years ago
- Views:
Transcription
1 4P Safety Limit Switches mm Metal Position Switches Specifications The mm metal safety limit switches conform to EN and have been developed to provide a range of options including a choice of snap-acting, slow-acting, and break before make (BBM) with 2-, 3-, and 4-circuit configurations and a choice of actuator heads. The distance between the horizontal mounting holes is mm. The operator heads can be rotated in increments for easy mounting. Allen-Bradley/Guardmaster limit switches can be used in other applications other than guard doors, for example on moving machine beds, crane arms, lifts, elevators, etc. Operation of these limit switches is achieved by the sliding action of the guard or other moving object deflecting the plunger or lever. Standards Category Approvals Safety Auxiliary Designation/Utilization Cat. A0/AC- 15 (Ue) (Ie) Q0/DC- 13 (Ue) (Ie) Thermal Current (lth) Rated Insulation Voltage Rated Impulse withstand Volt Travel for Positive Opening Max Switching Speed Min Switching Speed Max Switching Frequency Case Material Actuator Material Enclosure Protection Operating Temperature [C (F)] Pollution Degree ➋ Mechanical Life Expectancy Conduit Entry Fixing Mounting Color EN954-1, ISO1349-1, IEC/EN204-1, NFPA79, EN10, ISO149, IEC/ EN , ANSI B.19, AS24.1 Cat. 1 Device per EN954-1 Dual channel interlocks suitable for Cat. 3 or 4 systems culus, TÜV, CE and CCC Marked for all applicable directives 1 snap acting, 2, 3 or 4 slow acting 1 N.O. (with 2 ) Contact Specifications➊ 0 V 500 V 2 V 120 V 1.2A 1.4A 3A 6A 0 V 500 V 250 V 125 V 0.1 A 0.13 A 0.27 A A A 0 V AC 2500 V Various (see Product Selection table) 250 mm/s 100 mm/min 00 operation per hour Die cast alloy See Product Selection table IP ( ) 3 1 x 10 7 operations with no electrical load M20 or 1/2 inch NPT 2xM5 Any position Red ATTENTION For safety applications it is important that upon actuation, the guard or other moving objects should not pass completely over the switch and allow the plunger or lever to return to its original position. ➊ Maximum for: Two-Circuit N5 5-Pin Mini Connector AC DC 0V, 2.5 A 0V, 2.5 A Four-Circuit M9 12-Pin M23 Connector AC DC V, 2.5 A V, 2.5 A Features ➋ Conductive pollution occurs, or dry, nonconductive pollution occurs which becomes conductive due to condensation. Large selection of actuator heads Positive operation, forced disconnection of contacts -acting, slow make before break or slow break before make contact blocks N.O., N.O. 3, N.O., N.O., or 4 Conforms to EN 50041, EN 10, EN , EN 292 and EN Safety Limit Switches Product Selection... page Wiring... page Dimensions... page Visit our website:
2 4P Safety Limit Switches mm Metal Position Switches Product Selection Operator Type Typical Force/ Contact Opening Characteristics Cat. No. Contact Torque to Open Closed 1/2 inch NPT Safety Aux. Type Operate Positive Opening Point Conduit M20 Conduit Quick Disconnect 1 13 N P-MRPSE 4P- MRPSB 4P-MRPSN N 1.4 4P-MRPB04E 4P-MRPB04B 4P-MRPB04M BBM N 4P-MRPB13E 4P-MRPB13B 4P-MRPB13M9 1.9 Metal Roller Plunger 2 2N.O. BBM N P- MRPB22E 4P-MRPB22B 4P-MRPB22M N P-MDPSE 4P-MDPSB 4P-MDPSN N 1.7 4P-MDPB04E 4P-MDPB04B 4P-MDPB04M BBM N 4P-MDPB13E 4P-MDPB13B 4P-MDPB13M9 2.0 Metal Dome Plunger 2 2N.O. BBM N P-MDPB22E 4P-MDPB22B 4P-MDPB22M cnm 0_ 4P- MSLSE 4P- MSLSB 4P-MSLSN5 15_ 15_ NSm 3 BBM 0_ 10cNm 35cN m 0_ 35cN m 4P-MSLB04E 4P-MSLB04B 4P-MSLB04M9 4P-MSLB13E 4P-MSLB13B 4P-MSLB13M9 Metal Short Lever 2 2N.O. BBM 35cN m 0_ 35cN m P-MSLB22E 4P-MSLB22B 4P-MSLB22M9 Recommended standard cordset, 2 m, 5-pin mini connector (see page -1 for additional lengths). Recommended standard cordset, 2 m, 12-pin 9 wire (see page -1 for additional lengths). N5 = 5 -pin mini connector. M9 = 12 -pin M23 connector (use 9 wire). 9N -F5AE-6F 9M -F12X9AE-2 Visit our website:
3 4P Safety Limit Switches mm Metal Position Switches Product Selection (continued) Operator Type Typical Force/ Contact Opening Characteristics Cat. No. Contact Torque to Open Closed 1/2 inch NPT Safety Aux. Type Operate Positive Opening Point Conduit M20 Conduit Quick Disconnect 1 35 cnm 0_ 4P-MMHSE 4P-MMHSB 4P-MMHSN5 15_ 15_ NSm 0_ 10cNm 4P-MMHB04E 4P-MMHB04B 4P-MMHB04M9 35cN m 0_ 35cN m 3 BBM 4P-MMHB13E 4P-MMHB13B 4P-MMHB13M9 Metal Short Lever, Metal Roller 2 2N.O. BBM 35cN m 0_ 35cN m P-MMHB22E 4P-MMHB22B 4P-MMHB22M9 1 0_ 4P- MALSE 4P-MALSB 4P-MALSN5 15_ 15_ NSm 0_ 10cNm 4P-MALB04E 4P-MALB04B 4P-MALB04M9 0_ 3 BBM 4P-MALB13E 4P-MALB13B 4P-MALB13M9 Metal Adjustable Lever 2 2N.O. BBM cN m 0_ 35cN m 4P- MALB22E 4P-MALB22B 4P-MALB22M9 1 0_ 4P-MARSE 4P-MARSB 4P-MARSN5 15_ 15_ NSm 0_ 10cNm 4P-MARB04E 4P-MARB04B 4P-MARB04M9 0_ 35cN m 35cN m 3 BBM 4P-MARB13E 4P-MARB13B 4P-MARB13M9 0_ 2 2N.O. BBM 4P-MARB22E 4P-MARB22B 4P-MARB22M9-34 Metal Rod Lever Recommended standard cordset, 2 m, 5-pin mini connector (see page -1 for additional lengths). 9N -F5AE-6F Recommended standard cordset, 2 m, 12-pin 9 wire (see page -1 for additional lengths). 9M -F12X9AE-2 N5 = 5 -pin mini connector. M9 = 12 -pin M23 connector (use 9 wire). Not positive opening Visit our website:
4 4P Safety Limit Switches mm Metal Position Switches Product Selection (continued) Description Safety Auxiliary Contact Type Typical Force/Torque to Operate Contact Opening Characteristics Cat. No. 1/2 inch NPT Conduit M20 Conduit Connector 1 1 N.O P-MSRSE 4P-MSRSB 4P-MSRSN P-MSRB04E 4P-MSRB04B 4P-MSRB04M9 3 1 N.O. BBM -44 4P-MSRB13E 4P-MSRB13B 4P-MSRB13M9 Metal Spring Rod 2 2 N.O. BBM 4P-MSRB22E 4P-MSRB22B 4P-MSRB22M N.O. 4P-MTASE 4P-MTASB 4P-MTASN P-MTAB04E 4P-MTAB04B 4P-MTAB04M9 3 1 N.O. BBM -44 4P-MTAB13E 4P-MTAB13B 4P-MTAB13M9 Telescopic Arm 2 2 N.O. BBM 4P-MTAB22E 4P-MTAB22B 4P-MTAB22M N.O. 4P-MRRSE 4P-MRRSB 4P-MRRSN P-MRRB04E 4P-MRRB04B 4P-MRRB04M9 3 1 N.O. BBM 0.34 N m (3.01 lb in) -44 4P-MRRB13E 4P-MRRB13B 4P-MRRB13M9 Large Rubber Roller 2 2 N.O. BBM Recommended standard cordset, 2 m, 5-pin mini connector. Recommended standard cordset, 2 m, 12-pin 9-wire. N5 = 5-pin mini connector. M9 = 12-pin M23 connector (use 9 wire). Not positive opening 0.34 N m (3.01 lb in) 4P-MRRB22E 4P-MRRB22B 4P-MRRB22M N-F5AE-6F 9M-F12X9AE-2 Visit our website:
5 4P Safety Limit Switches mm Metal Position Switches Typical Wiring Diagrams 4 1 N.O. 1 1 N.O. 3 2 N.O Same polarity this side of block N5 Connector 2 Circuit 5-Pin Mini Connector 1 () 12 Connector Ratings Max. Ratings AC DC 5-Pin Mini (M12) 0V, 2.5 A 0V, 2.5 A 12-Pin (M23) V, 2.5 A V, 2.5 A Applicable Standards IEC : Auxiliary Circuit (N.O.) M9 12-Pin M23 Connector N.O. 3 Connector Pinout Terminal Contact Terminal Contact Terminal Contact N.O N.O N.O. 12 Ground Approximate Dimensions mm (inches) Dimensions are not intended to be used for installation purposes. 17 (0.66) Dia. 21 (0.2) 19 (0.74) 1 (0.70) 64 (2.51) Dia. 7 (0.27) 4 (1.) 34 (1.) 63 (2.4) (4.64) 105 (4.13) 1 (5.23) Roller Plunger Dome Plunger Short Lever, (Metal & Plastic Roller) Visit our website:
6 4P Safety Limit Switches mm Metal Position Switches Approximate Dimensions mm (inches) (continued) Dimensions are not intended to be used for installation purposes. 17 (0.66) 64 (2.51) Dia. 7 (0.27) 5 (3.34) Max. 16 (0.62) 4 (0.15) 103 (5) 172 (6.77) Max. Extension 5 (0.19) Dia. 57 (2.24) 2 (9.44) Max. Extension 16 (0.62) Adjustable Lever 103 (5) Rod Lever 2 (.3) 10 (0.39) Dia. (0.) Spring Rod Ø 50.0 (1.97) (0.31) 3 (.92) min Extends to 900 (35.) max R ( ) ( ) (0.) Telescopic Arm Adjustable Lever with Rubber Roller 67.6 (2.66) Visit our website:
Safety Limit Switches Small Plastic Senator
Position Interlock Switches Small Plastic Senator Description The small plastic Senator safety limit switches conform to EN 50047 and have been developed to provide a range of options including metal or
Specifications. Safety Ratings. Standards. Safety Classification. Certifications. Safety Contacts. Housing Material. Vibration
mm Plastic Body These mm plastic-body safety limit switches conform to EN 50047 standards and are available with snap-acting or slowbreak/make 2- or 3-contact configurations as well as a variety of actuator
Specifications. Safety Ratings. Standards. Safety Classification
General 1-2-Opto-electronics Safety Switches 4-Emergency Logic Power The Lifeline 4 cable/push button operated system can be installed along or around awkward machinery such as conveyors and provide a
FM series position switches
FM series position switches Selection diagram 0 08 0 A A 0 A 0 External rubber gasket External rubber gasket External rubber gasket External rubber gasket 0 69 Round rod, stainless steel Square rod Glass
MICRO SWITCH Electromechanical Safety Switches GSS Series Issue 1. Datasheet FEATURES DESCRIPTION POTENTIAL APPLICATIONS DIFFERENTIATION
MICRO SWITCH Electromechanical Safety Switches GSS Series DESCRIPTION Honeywell s MICRO SWITCH GSS Series electromechanical safety switches are comprised of different groups of safety switches designed
LR Position Switches TECHNICAL DATASHEET
TECHNICA DATASHEET Position Switches Technopolymer housing, one conduit entry Protection degree IP6 according to EN 69 contact blocks available actuators available M assembled connector versions Silver
Safety switches with slotted hole lever
Safety switches with slotted hole lever Selection diagram C1 C C C4 C5 Straight slotted hole lever Slotted hole lever at the left Slotted hole lever at the right (without bend) Slotted hole lever at the
MICRO SWITCH Key-Operated Safety Interlock Switch GK Series Issue 1. Datasheet FEATURES DESCRIPTION POTENTIAL APPLICATIONS DIFFERENTIATION
MICRO SWITCH Key-Operated Safety Interlock Switch GK Series DESCRIPTION MICRO SWITCH GK Series switches are key-operated safety interlock rugged metal switches which monitor the positions of gates, guards,
Heavy-duty Metal Body Safety Interlock Switch. DIN mounting pattern for globally recognized mounting configuration
C R US Conforms to EN1088, EN292, EN60947-5-1, EN60204-1, EN50041 UL and C-UL listed T4011 Heavy-duty Metal Body Safety Interlock Switch Rugged enclosure the all metal housing and stainless steel actuator
Position switches FM series
B Position switches FM series Selection diagram 0 08 0 A A 0 A 0 external rubber gasket external rubber gasket external rubber gasket external rubber gasket 69 stainless steel round rod square rod fiber
Detecting Devices. 8/2 Introduction
Siemens AG 29 Detecting Devices /2 Introduction 3SE5, 3SE2, 3SE3 Position Switches /4 General data /11 3SE5, plastic and metal enclosures /2 3SE2, plastic enclosures /26 3SE2, metal enclosures /36 3SE3,
Detecting Devices. 8/2 Introduction
Detecting Devices /2 Introduction /4 General data / 3SE5, plastic enclosures /16 3SE2, plastic enclosures /22 3SE5, metal enclosures /30 3SE2, metal enclosures /39 3SE3, metal enclosures Compact design
Components for safety applications
Metal, turret head, types CS-A, CS-C and CS-E Double insulated, turret head, types CS-PA, CS-TA and CS-TE Presentation Metal, types CS-A, CS-C, CS-E Switches with or without locking of the actuator Pages
Limit Switches Selection Guide. SN61 04 SL C Head Styles (see table below) Contact Type. SP: Snap Action. SL: Slow Action
SUNS International, LLC is the leading manufacturer of high quality industrial limit switches, micro switches. SUNS offers complete ranges of control components which are reliable, available, competitive,
800T T2 H2 E E X X. a b c d e f g Right Left Right Left. d, e, f, g. c (cont'd) 1-, 2-, 3-, 4-Way Toggle Switches (Bul. 800T only)
1-,, 3-, 4- Toggle Switches (Bul. 800T only) 800T T2 H2 E E X X a b c d e f g Right Left Right Left Blank C T1 T2 T3 T4 a Finger-Safe Guards Description No guards Guards on terminals b Operator Type Description
Position switches FR series
B Position switches FR series Selection diagram 0 A 0 0-0 A A 0 A external rubber gasket external rubber gasket for electrical panels external rubber gasket external rubber gasket external rubber gasket
Datasheet - PROTECT-IE-02
Print - Create PDF - Create EXCEL file 20.04.2011-18:28:57h Datasheet - PROTECT-IE-02 Input expander / PROTECT-IE Input expander Input for up to 4 sensors per interface e.g.: magnetic safety switches type
DISCONNECT SWITCHES. UL Listed CSA Certified
POWER & ACTUATION ENCLOSED DISCONNECT SWITCHES When you need an at-motor non-fused disconnect switch with superior performance, look to c3controls. Our Series E2 Enclosed Disconnects feature 3- and 4-Pole
Bulletin 800H Hazardous Location Push Buttons Product Overview/Specifications. Table of Contents See below.
Bulletin H Product verview/specifications Bulletin H/ Hazardous locations push buttons and stations Classes I, II & III Divisions & / in. - NPSM barrel Type & Explosion-proof operators Table of Contents
Spring Return DuraDrive Proportional Actuator
MS40-7043, MS4-7073, MS4-753 Spring Return DuraDrive Proportional Actuator For spring return applications that require proportional modulation control of dampers and valves in HVAC systems. Features: Proportional
Power supply CP-D 24/4.2 Primary switch mode power supply
Data sheet Power supply CP-D 24/4.2 Primary switch mode power supply The CP-D range of modular power supply units in MDRC design (modular DIN rail components) is ideally suited for installation in distribution
METAL-BODIED LIMIT SWITCHES: SN6 SERIES
METAL-BODIED LIMIT SWITCHES: SN6 SERIES Features: Aluminum body and lid Mounting Advantages: Snap action or slow make & break contacts Increased wiring space Galvanically separated contacts Screw terminals
isw switches Control Local control IEC/EN , isw switch with indicator light. IEC/EN , isw switch without indicator light.
isw switches DB88 PB0566-40 Position contact indication b Suitable for industrial isolation according to IEC/EN 60947-3 standard. b The presence of the green strip guarantees physical opening of the contacts
Datasheet - ZQ N
20.07.2016-17:41:15h Datasheet - ZQ 900-13N Pull-wire emergency stop switches / ZQ 900 Preferred typ Metal enclosure one-side operation / wire up to 75 m long Release push button Position indicator Robust
Electronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts The CT-AHS.22 is an electronic timer from the CT-S range with OFF-delay and 10 time ranges. All electronic timers from the CT-S
Datasheet - ZQ Pull-wire emergency stop switches / ZQ 700
Datasheet - ZQ 700-02 Pull-wire emergency stop switches / ZQ 700 Preferred typ thermoplastic enclosure one-side operation / wire up to 10 m long Release push button Position indicator Large wiring compartment
Snap Action Switches Technical Guide
These basic principles apply to all our precision switches. The specific characteristics of each model are given in more detail in the relevant production sections. Switch construction Single-pole changeover
Table of Contents. 22mm Push Buttons. 30mm Metal Push Buttons. 22mm Plastic Enclosures, Control Boxes & Installation Instructions 30-35
Altech Corporation Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff
Power supply CP-D 24/1.3
2CDC 271 027 F0t07 a OUTPUT ++/ : terminals output Features Rated output voltage 24 V DC Output voltage adjustable via front face potentiometer OUTPUT Adjust Rated output current 1.3 A Rated output power
Control module CP-A CM
2CDC 271 002 F0t05 Features Pluggable onto redundancy unit CP A RU Threshold values adjustable (14 28 V) One relay output per monitored input / channel Approvals H UL 508, CAN/CSA C22.2 No.14 H UL 60950,
Type CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
Control Stations ø 22
Control Stations ø 22 CONTROL STATIONS - NON-ILLUMINATED Technical Info (p. 103) MUSHROOM HEAD Ø 40 - MAINTAINED Push-turn to reset Part Number M16/20 47.9 25.7 Ø 40 Red NC EMERGENCY STOP LBX10510 Red
Auxiliary Contact (10 600V) Auxiliary Contact (10 5V DC)
Bulletin C,, C Accessories Accessories Auxiliary Contacts Contactors are supplied with one normally open and one normally closed auxiliary contact (A rating) as standard. Additional auxiliary contacts,
Control stations and enclosures Pendant control stations, for control circuits Double insulated or metal, types XAC-B and XAC-M
Characteristics Pendant control stations, for control circuits Environment Conforming to standards IEC 947-5-1, EN 60947-5-1 XAC-B : standard version : NEMKO, CSA 300 V type 4 Approvals XAC-M : standard
Power supply CP-E 24/0.75
2CDC 271 016 F0t06 a OUTPUT L+, L : terminals output b INPUT L, N, PE: terminals input c LOW: red LED output voltage too low d OK: green LED output voltage OK e OUTPUT Adjust: rotary potentiometer output
56 mm sq. (2.20 inch sq.)
56 mm sq. (. inch sq.) 1.8 /step RoHS Unipolar winding, Lead wire type Bipolar winding, Lead wire type p. 7 Customizing Hollow Shaft modification Decelerator Encoder Varies depending on the model number
AE SERIES ACTUATORS 2016 EDITION. The Best Way To Automate Your Process. Modulating Capable. Extended Duty Cycle Models Fast Acting Models
The Best Way To Automate Your Process St a n d a r d Vo l t age s 110/240/380/480V 24/24VDC Modulating Capable Extended Duty Cycle Models Fast Acting Models AE SERIES ACTUATORS 2016 EDITION Max-Air Technology,
Three-phase monitoring relay CM-PFS
Data sheet Three-phase monitoring relay CM-PFS The CM-PFS is a three-phase monitoring relay that is used to monitor three phase mains for incorrect phase sequence and phase failure. All devices are available
Complete units: Mushroom heads ø 22mm
Complete units: Mushroom heads ø 22mm MAINTAINED - NON-ILLUMINATED Ø 40 MUSHROOM Push-pull to reset Technical Info (p. 103) Black Bezel Part Number 34.2 Ø 40 Red NC L22DD01-3E01 Red 2 NC L22DD01-3E02 Red
PD30CNB25xxPS. Photoelectrics, Background suppression reflective - PointSpot. Main features. Main functions. Description
Photoelectrics, Background suppression reflective - PointSpot Main features Miniature sensor range The visible red PointSpot light makes alignment very easy Range: 250 mm Sensitivity adjustment by potentiometer
Complete units: Push-buttons ø 22mm
Complete units: Push-buttons ø 22mm FLUSH SPRING RETURN - NON-ILLUMINATED Chrome Bezel Part Number Technical Info (p. 103) Black Bezel Part Number 11 Ø 29.9 20.1 19.6 With single position clip Red NC L21AA01-1E01
Electromechanical pressure and vacuum switches 0
30350-EN_Ver6..fm/ Presentation Electromechanical and vacuum switches 0 Nautilus For control circuits, type XML Pressure and vacuum switches type XML are switches for control circuits. They are used to
Power supply CP-D 12/2.1
2CDC 271 025 F0t07 a OUTPUT ++/ : terminals output Features Rated output voltage 12 V DC Output voltage adjustable via front face potentiometer OUTPUT Adjust Rated output current 2.1 A Rated output power
TeSys contactors. TeSys D contactors. IEC/EN , IEC/EN , UL 508, CSA C22.2 n 14. Protection against direct fi nger contact IP 2X
Characteristics Contactor type LC1 D09 D18 DT20 and DT25 Environment Rated insulation voltage (Ui) Conforming to IEC 097--1, overvoltage category III, degree of pollution: 3 Conforming to UL, CSA V 00
M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
![M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information](/thumbs/77/74547895.jpg "M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information")
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
SIRCO M UL98 Load break switches standards UL and CSA 30 to 100 A
The solution for Load break switches > Power distribution. sircm_100_a_1_cat Rotary switch SIRCO M 3 x 100 A Strong points > Total integration. > Wide range of accessories. > Upgradeability. > Compliance
MODEL: MRP5. Final Control Elements. [2] TERMINAL BOX T: With
![MODEL: MRP5. Final Control Elements. [2] TERMINAL BOX T: With](/thumbs/95/125412814.jpg "MODEL: MRP5. Final Control Elements. [2] TERMINAL BOX T: With")
Final Control Elements MINI-TOP ELECTRONIC ACTUATOR (rotary type) Functions & Features Small-size control valve actuator 1/1 high resolution Easy adjustment: electronic limiter at the valve open & closed
Components for safety applications Preventa safety modules
Selection guide Applications Modules For Emergency Stop and limit switch monitoring (modules integrated in Micro PLCs) Conforming to standards Machine IEC 204-, EN 292, EN 48 assemblies EN 60204- Principles
Electric Actuator. of innovated design. Introducing KIMAX CONTROLS INC. > Patented switch of manual & Motor operation. Clutchless manualoverride.
CONTROLS INC. Introducing KIMAX CONTROLS INC. Kimax Taiwan : 5F-10,No.3, Lane 2, First Industrial Rd., Taichung Taiwan, 40767 Tel:886-4-23507533 Fax:886-4-23507531 E-mail:eric-shia@kimax.com.tw Kimax China
Liquid level monitoring relay CM-ENS.2x
Data sheet Liquid level monitoring relay CM-ENS.2x The CM-ENS.2x is served to regulate and control liquid levels and ratios of mixtures of conductive fluids. It can be used for overflow protection, dry
Power consumption In operation At rest For wire sizing
echnical data sheet GM4A-SR-P Modulating damper actuator for operating air control dampers in ventilation and airconditioning systems for building services installations For air dampers up to approx. 8
Analog signal converters CC-E I/I
2CC 281 001 F0b06 Features Loop-powered I/I isolator without external power supply for analog current signals of 0-20 ma and 4-20 ma Electrical isolation between input and output Very low internal voltage
Complete units: Selector switches ø 22mm
Complete units: Selector switches ø 22mm SELECTOR SWITCHES - NON-ILLUMINATED Technical Info (p. 13) WITH KNOB 2 and 3 positions Chrome Bezel Part Number Black Bezel Part Number Ø 29.9 Maintained positions
Rotary Measurement Technology Incremental Encoders
-20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
MODEL: MRP6. Final Control Elements
Final Control Elements MINI-TOP ELECTRONIC ACTUATOR (rotary type) Functions & Features Small-size control valve actuator Electrical positioner incorporated 1/1000 high resolution Easy adjustment: electronic
Electronic timer CT-TGD.22
2CDC 251 097 F0t06 a Rotary switch for the preselection of the time range of the ON time b Potentiometer with direct reading scale for the fine adjustment of the ON time c Rotary switch for the preselection
Electronic timer CT-SDD.22
CDC 099 F0t0 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied W
New Products Catalogue 2009 Safety Relays ESR5
www.moeller.net New Products Catalogue 2009 Safety Relays ESR5 u Description Functional safety on machines monitoring with safety relays ESR5 Emergency-stop circuits Monitoring of movable guards with guard
IP65 Splash and Dust Proof Stepping Motors
IP5 Splash and Dust Proof Stepping Motors CE/UL Model Features These IP5 rated motors* have superior water and dust resistance, and can be safely utilized in harsh or wet environments such as in food processing
Type Overview. Technical Data. Outdoor Humidity, Temperature Sensor
Outdoor Humidity, Temperature Sensor ±2% accurate humidity and temperature sensor for outdoor applications. Temperature is available with dual active 4 to 20 ma outputs or passive only for temperature.
Open Type Without Enclosure
Bulletin L NEMA AC Electrically Held Lighting Contactors Product Selection Top Wiring for Non-Motor and Lighting Loads Tungsten Lamp Loads (Max. V Line, V Load) Maximum Continuous Ampere Ratings [A] General
Mini Contactors. Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks. Interface Contactor Relays. Mini Contactors 10 Auxiliary Contact Blocks
Mini Contactors Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks Interface Contactor Relays Mini Contactors 10 Auxiliary Contact Blocks Mini Contactors With Fast On Tab Connectors 12 Mini Contactors
Operator Heads: ø 22mm
Operator Heads: ø 22mm ONE-PIECE PILOT LIGHTS Technical Info (p. 103) SUPPLIED WITHOUT BULB Part Number L20SA40 14.3 44.1 Ø 29.8 Ø 20.2 Ø 22 Ø 29.5 1 to 6 6 Ribbed Lens Clear Smooth Lens With text or symbol
G5NB. A Miniature Relay with 1-pole 3A/5A Switching Capability and 10 kv Impulse Withstand Voltage. Application Examples. Model Number Legend
PC Power Relay A Miniature Relay with -pole A/5A Switching Capability and 0 kv Impulse Withstand Voltage Highly efficient magnetic circuit for high sensitivity (200 mw). Small, yet provides 0-kV impulse
MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
![MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]](/thumbs/80/80593914.jpg "MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]")
MODEL: MMNV Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels
Valves with a difference. Electrical Actuators DVC INTERNATIONAL
Valves with a difference Electrical Actuators DVC INTERNATIONAL With DVC International as your business partner, you are always guaranteed a wide, well sorted product range and a unique technical know-how
Non-Spring Return EconoDrive Proportional Actuator
MSD-0x3 Series Non-Spring Return EconoDrive Actuator EconoDrive overshaft actuators are designed to provide an economical and reliable solution for many overshaft damper and ball valve requirements. All
C20.en. Power contactors for AC and DC CT1115 and CT1130. Connect - Contact - Control
Caution: Device contains unprotected active pieceparts, Device contains unprotected non-active pieceparts, which may interact with active pieceparts, Touch only after adhering to corresponding safety regulations!
60 mm sq. (2.36 inch sq.)
6 mm sq. (.36 inch sq.) 1.8 /step RoHS Unipolar winding, Connector type Unipolar winding, Dimensions for attaching NEMA3 are interchangeable (47.14 mm-pitch) Bipolar winding, Connector type p. 76 Bipolar
Non-Spring Return DuraDrive Modulating Actuator
MS41-60xx Series n-spring Return DuraDrive Modulating Actuator The DuraDrive direct coupled 24 Vac non-spring return rotary electric actuators are designed for modulating control of dampers. S41-60xx ries
Electronic timer CT-AWS Impulse-OFF with 1 c/o contact Data sheet
2CDC 251 121 F0004 1 5 2 4 3 6 Characteristics Single-function impulse-off timer One device includes 10 time ranges, from 0.05 s to 300 h, for the adjustment of the pulse time Remote potentiometer connection
Current monitoring relays CM-SRS.1 For single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.1 For single-phase AC/DC currents The CM-SRS.1 is an electronic current monitoring relay that protects single-phase mains (DC or AC) from over- and undercurrent
Power supply CP-E 24/2.5
2CDC 271 015 F0t06 a OUTPUT L+, L : terminals output b DC OK: terminal signalling output c INPUT L, N, PE: terminals input d OUTPUT OK: green LED output voltage OK e OUTPUT Adjust: potentiometer adjustment
Output Signal Active Note. Output Signal Temperature 22UTH-51 DC V, DC V
Outdoor Humidity, Temperature Sensor ±2% accurate humidity and temperature sensor for outdoor applications. Temperature is available with dual active 4 to 20 ma outputs or passive only for temperature.
Sensors Inductive proximity switches Capacitive proximity switches Optoelectronic proximity switches Magnetic switches
Content Introduction Introduction and notices Representations worldwide, see left cover Mounting instructions, see left cover Schmersal The Company The Schmersal Group New products and innovations I-2
Contents. Han Hv ES / Han Hv E Technical characteristics Han Hv ES Technical characteristics Han Hv E Han 3 Hv ES
Contents S / Page Technical characteristics S............................. 04.10 Technical characteristics.............................. 04.11 3 S.............................................. 04.12 3...............................................
Contactors. Series C137, C163, C164, C165 Single pole contactors for battery voltages Catalogue B60.en
Contactors Series C7, C6, C6, C65 Single pole contactors for battery voltages Catalogue B.en Contactors for battery voltages C7, C6, C6, C65 Series With its proven line of C7 through C65 Series contactors
Two-way Action Test Button (Models with Lockable Test Button) For Momentary Operation
General Purpose Relays MKS Exceptionally Reliable General Purpose Relay now available with Lockable Test Button IEC Rating of A 0 V AC 0/0 Hz, General use 100,000 cycles. Mechanical indicator standard
Description Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA
Contactor relay, 2N/O+2N/C, AC Part no. DILA-22(24V60HZ) Catalog No. 276390 Eaton Catalog No. XTRE10B22B6 Delivery program Product range DILA relays Application Contactor relays Description Basic devices
SIGNAL // POWER // INDUSTRIAL ETHERNET
CIRCULAR CONNECTORS SIGNAL // POWER // INDUSTRIAL ETHERNET 2 HUMMEL smart & reliable HUMMEL AG is a renowned manufacturer of connection technology and components for electric and heating areas. The medium
Current monitoring relays CM-SRS.2 For single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.2 For single-phase AC/DC currents The CM-SRS.2 is an electronic current monitoring relay that protects single-phase mains (DC or AC) from over- and undercurrent
MULTIBLOC 4a.ST8 Size 4a, 690VAC, 1600A, 690VAC, Design for Bottom Fitting, 1-, 3-pole
MULTIBLOC 4a.ST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR FEATURES & BENEFITS Touch protection IP 20 Safe on load connection/disconnection in accordance with IEC 609473 The production
MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
![MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]](/thumbs/95/123316479.jpg "MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]")
Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels CE marking
Separate units: Blocks
Separate units: Blocks LED BLOCKS Technical Info (p. 103) SCREW TERMINALS Part Number 3.8 LED 19.7 20.1 X1 X2 33EARL 9.9 19.7 21.5 18.2 12/24 V White Red Green Blue Yellow 33EAWL 33EARL 33EAGL 33EABL 33EAYL
EX-40 SERIES. Convergent Reflective Photoelectric Sensor. Reliable object detection in limited area. Stable convergent distance sensing
313 PHOTO PHOTO Convergent Reflective Photoelectric EX-4 SERIES Related Information General terms and conditions... F-3 Glossary of terms / General precautions...p.1549~ / P.1552~ guide... P.231~ Korea
Electronic timer CT-MBS.22 Multifunctional with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-MBS.22 Multifunctional with 2 c/o (SPDT) contacts The CT-MBS.22 is a multifunctional electronic timer from the CT-S range. It provides 10 timing functions and 10 time ranges.
Electronic timer CT-MXS.22 Multifunctional with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-MXS.22 Multifunctional with 2 c/o (SPDT) contacts The CT-MXS.22 is a multifunctional electronic timer from the CT-S range. It provides 5 timing functions, 2 times 10 time
Electronic timer CT-TGD.12 Pulse generator with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-TGD.12 Pulse generator with 1 c/o (SPDT) contact The CT-TGD.12 is an electronic time relay with the function pulse generator. It is from the CT-D range. With their MDRC profile
DATA SHEET. CIO multi-inputs. CAN bus-based I/O module
DATA SHEET CAN bus-based I/O module 8 multi-functional inputs Selectable as: o Digital input, 0(4) to 20 ma, 0 to 10 V, RMI, Pt100, Pt1000, Thermocouple type E, J, K, N, R, S or T Wire break detection
LC2D09BL REVERSING CONTACTOR 575VAC 9A IEC
Product datasheet Characteristics LC2D09BL REVERSING CONTACTOR 575VAC 9A IEC Price* : 107.62 GBP Main Range Product name Product or component type Device short name Contactor application Utilisation category
Electronic timer CT-MFS.21
2CDC 251 053 F0t07 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c Rotary switch for the preselection of the
Operator Heads: ø 22mm
Operator Heads: ø 22mm SPRING RETURN - NON-ILLUMINATED Technical Info (p. 103) FLUSH-FLUSH Twin touch Chrome Bezel Part Number Black Bezel Part Number 12.3 11 53.9 29.9 With International Symbols Green
Voltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages The CM-EFS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
Technical data. T2-SM230ASR en v Subject to changes / 3. Electrical data Nominal voltage AC
echnical data sheet SMASR Modulating damper actuator for adjusting air dampers in ventilation and air-conditioning systems for building services installations For air dampers up to approx. 4 m orque Nm
Power supply CP-E 24/2.5
2CDC 271 015 F0t06 a OUTPUT L+, L : terminals output b DC OK: terminal signalling output c INPUT L, N, PE: terminals input d OUTPUT OK: green LED output voltage OK e OUTPUT Adjust: potentiometer adjustment
Electronic timer CT-WBS.22 Impulse generating and flashing with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-WBS.22 Impulse generating and flashing with 2 c/o (SPDT) contacts The CT-WBS.22 is a multifunctional electronic timer from the CT-S range. It provides 10 timing functions
Electronic timer CT-ERS ON-delayed with 2 c/o contacts Data sheet
1SVR 430 103 F0200 CT-ERS 1 7 2 6 5 4 8 3 1 10 selectable time ranges, from 0.05 s to 300 h 2 Potentiometer with direct reading scale for the fine adjustment of the time delay 3 Sliding switch to set the
NEMA Contactor and Starter Specifications
Technical Data NEMA Contactor and Starter Specifications Bulletins 00, 0, 0, 0, 06, 06X, 07, 07X, 09,,, E/F/G, E/F/G Topic Page Specifications Electrical Ratings Mechanical Ratings, Construction, Environmental
Electronic timer CT-MFS.21 Multifunctional with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-MFS.21 Multifunctional with 2 c/o (SPDT) contacts The CT-MFS.21 is a multifunctional electronic timer from the CT-S range. It provides 10 timing functions, 10 time ranges
Electronic timer CT-SDS.22 Star-delta change-over with 2 n/o contacts Data sheet
CDC 0 F0t07 Features Rated control supply voltage -8 V DC, -0 V AC Single-function timer with star-delta change-over One device includes 7 time ranges (0.0 s - 0 min) n/o contacts LEDs for status indication