Voice/Data Identification. onlinecomponents.com THE LEADER IN COMMUNICATIONS LABELING 2004/2005
|
|
|
- Rosalyn Perry
- 6 years ago
- Views:
Transcription
1 Voice/Data Identification T HE LEADER IN COMMUNICATIONS L ABELING THE LEADER IN COMMUNICATIONS LABELING / ANSI/TIA/EIA 606-A COMPLIANT SOLUTIONS
2 Communications Cabling Labels 4 pair cables with PTL PTLFP PTL Brady offers a wide range of sizes to fit voice, data and video cabling applications. Our proprietary adhesive never loses its grip, even on the most slick Plenum cabling. TLS 2200 IDXPERT Benchtop Thermal Application Labels Labels LaserTab Labels Transfer Labels 4 PAIR UTP,CAT5,CAT5E, PTL * XSL LAT / ELAT ** THT CAT 6, SILVER SATIN 4 PAIR STP,25 PAIR COPPER PTL * XSL LAT / ELAT ** THT PAIR COPPER PTL * XSL THT PAIR COPPER PTL * XSL THT FIBER STRAND PTLFT / PTLFP FIBER/COAX PTL PAIR FIBER PTL * XSL LAT THT PAIR FIBER PTL * XSL LAT / ELAT ** THT RG-6 COAX, RG-59 COAX PTL * XSL LAT / ELAT ** THT BACKBONE CABLE PTL XSL PTL CABLE BUNDLES PTL *These labels are available in Blue (BL), Brown (BR), Gray (GY), Green (GN), Orange (OR), Purple (PL), Red (RD) and Yellow (YL). All PTLlabel sizes are also available in a Plenum rated version (PTL-XX-642) in white only. **ELAT sheets are A4 size for European use. Brady also offers cable labels for inkjet printers, including JET for 4 pair copper. Other sizes for smaller and larger cables are available. Cable sizes vary by manufacturer, so it is always recommended to try a particular size for your application. Cable labels are available in colors. PTL BL Tags for identifying cable bundles. PTL Tags for small diameter cables. PTLFT
3 Power and Ground Cable Labels Print Directly on the Tag! Application TLS 2200 Labels Size - Inch (mm) 145C TAG PTL GY x (44.45 x 25.40) 145P TAG PTL GY x (19.25 x 30.36) NON-ADHESIVE PTL x (19.05 x 76.20) CABLE TAGS PTL x (44.45 x 28.57) PTL GY Workstation Labels Faceplate with PTL Brady offers larger location labels for the entire faceplate and smaller labels to identify each individual port. Our proprietary adhesives stay attached to the textured plastics widely used in the industry. IDXPERT Benchtop Thermal Application TLS 2200 Labels Labels LaserTab Labels Transfer Labels DESI-STRIP INSERTS x (48.26 x 9.52) white PTL LAT THT LOCATION ID x (25.40 x 9.52) white PTL LAT THT x (25.40 x 9.52) clear PTL LAT THT x (25.40 x 12.70) white PTL X LAT THT x (25.40 x 12.70) clear PTL LAT x (38.10 x 9.52) white PTL LAT THT x (38.10 x 9.52) clear PTL LAT THT x (38.10 x 12.70) white PTL X LAT THT x (38.10 x 12.70) clear PTL LAT THT OUTLET / JACK ID x (12.70 x 9.52) white PTL LAT THT x (12.70 x 9.52) clear PTL LAT THT x (12.70 x 12.70) white PTL X LAT THT x (12.70 x 12.70) clear PTL LAT THT GENERAL USE (9.52) cont. white PTL XC (9.52) cont. clear PTL Communication symbols make labeling easier. PTL Desi-strip inserts are cut to size, saving time and money. PTL
4 Closet Hardware Labels Patch Panel with LAT Labels sized for patch panels and faceplate ports. PTL Our LabelMark /WIN software automatically spaces for 3, 4, 5 pairs and serializes backbone and horizontal for 110 block labeling. LAT BL TLS 2200 IDXPERT LaserTab Benchtop Thermal Benchtop Thermal Application Labels Labels Labels Transfer Labels Size - Inch (mm) PATCH PANEL - 4 PORT x (71.12 x 9.52) PTL LAT THT x (76.20 x 6.35) PATCH PANEL - 6 PORT x (91.44 x 9.52) PTL LAT PATCH PANEL - ID PORT x (12.70 x 9.52) white PTL LAT THT x (12.70 x 9.50) x (12.70 x 9.52) clear PTL LAT THT x (12.70 x 9.50) x (12.70 x 12.70) white PTL X LAT THT x (12.70 x 12.70) x (12.70 x 12.70) clear PTL LAT x (12.70 x 19.05) clear PTL x (19.05 x 6.35) white PTL x (19.05 x 6.35) clear PTL PATCH PANEL / CONTINUOUS TAPES (6.35) x continuous clear PTL (6.35) x continuous white PTL (6.35) x continuous white PTL (9.52) x continuous white PTL XC (9.52) x continuous clear PTL BLOCKS* x ( x 12.07) - - LAT * - BIX BLOCKS* x ( x 15.87) - - LAT * - LUCENT PATCHMAX* x (76.20 x 12.70) - - LAT * - *These labels are available in Blue (BL), Brown (BR), Gray (GY), Green (GN), Orange (OR), Purple (PL), Red (RD) and Yellow (YL) to comply with TIA/EIA 606-A. LASERTAB LANPAK 4 Brady offers a LAT-LANPAK, which features 10 sheets of all of the label sizes below. These sizes represent our more popular label sizes: Part Number Application Size Inch (mm) LAT Faceplate x (25.40 x 9.53) LAT Pair Cable x (25.40 x 33.78) LAT Port Grouping x (91.44 x 9.53) on Patch Panel LAT Faceplate/Patch Panel x (12.70 x 9.53) Part Number Application Size Inch (mm) LAT Faceplate/Patch Panel x (38.10 x 12.70) LAT Faceplate Desi-Strips x (50.29 x 9.65) LAT WH 110 Blocks,in White x ( x 12.19) LAT BL 110 Blocks, in Blue x ( x 12.19)
5 Racks, Panels, Frames and Miscellaneous Applications Brady offers a wide range of label sizes for racks, shelves, telecomm main grounding bus bars, firestopping locations, pathways and general equipment marking in the telecommunications closet. Benchtop Benchtop Thermal TLS 2200 LaserTab LaserTab Thermal Transfer Labels Application Labels Labels Size - Inch (mm) Transfer Labels Size - Inch (mm) GENERAL ID x (12.70 x 50.80) PTL x (19.05 x ) PTL THT x 300 ft ( x m) x (19.05 x ) PTL x (34.93 x 25.40) PTL x (25.40 x 38.10) PTL x (38.10 x 19.05) PTL x (38.10 x 38.10) PTL x (50.80 x 25.40) PTL LAT x (47.63 x 21.16) THT x (50.80 x 25.40) x (50.80 x 25.40) PTL THT x (50.80 x 25.40) x (76.20 x 25.40) PTL LAT x (44.45 x 25.40) THT x (76.20 x 25.40) x (76.20 x 48.26) PTL LAT x (76.20 x 22.86) THT x (76.20 x 50.80) x (76.20 x 48.26) PTL THT x (76.20 x 50.80) x ( x 25.40) PTL LAT x (50.80 x 36.50) THT x 300 ft ( x m) x ( x 25.40) PTL THT x 300 ft ( x m) x ( x 25.40) PTL LAT x (76.20 x 36.50) THT x ( x 50.80) x ( x 48.26) PTL THT x ( x 50.80) CONTINUOUS TAPES FOR TLS 2200 AND IDXPERT Application TLS 2200 Labels IDXPERT Labels PATCH PANEL / GENERAL ID (6.35) x continuous clear PTL (6.35) x continuous white PTL (6.35) x continuous white PTL (9.52) x continuous white PTL XC (9.52) x continuous clear PTL (12.70) x continuous white PTL (12.70) x continuous clear PTL (12.70) x continuous clear PTL (12.70) x continuous white PTL (12.70) x continuous white PTL (12.70) x continuous white PTL (25.40) x continuous white PTL (25.40) x continuous clear PTL ** (25.40) x continuous white PTL XC /XC (25.40) x continuous white PTL (33.02) x continuous clear PTL *** (33.02) x continuous white PTL *** (33.02) x continuous white PTL *** (48.26) x continuous clear PTL (48.26) x continuous white PTL (48.26) x continuous white PTL (48.26) x continuous white PTL ** B-432 material available in additional label sizes. Red, white and blue ribbon colors also available. *** This is the minimum width continuous tape needed to print a 3/4 font. Available in color. 5
6 Brady PC-Based and Portable Labeling Systems Here is the newest 300 dpi thermal, handheld labeling system that has everything it takes to make you an Identification Expert!. Label patch panels, outlet faceplates and cables. Identify racks, bays, frames, public network and data centers all with one versatile tool. The IDXPERT is the first handheld cartridge based labeling system that can print die-cut labels, self-laminating labels and sleeves as well as continuous tapes. Visit for all the details. Designed from the ground up for the communications industry, the portable TLS 2200 Thermal Labeling System and the desktop TLS PC Link Thermal Labeling System are light-weight, easy-to-use and allow you to print labels whenever and wherever you need them. Both printers provide clean, dark text on die-cut labels that don't fall off. No more cutting office labeler tapes to size! Optional LabelMark software allows you to easily format cable, faceplate and closet labels. You can download information from spreadsheets and cable management software packages to save time. The software includes templates for all the Brady labels designed for your application, and has built in templates to automatically format 110 block and patch panels. You can then print directly to the TLS 2200 or TLS PC Link printer using its PC connectivity feature. LabelMark software is included with the purchase of a TLS PC Link printer. LABELING TOOL ID Pal is an affordable, handheld label printer designed for wire, cable, faceplate and industrial labeling applications. The ID Pal is the ideal solution for the low volume label printing associated with Moves, Adds and Changes (MACs). With its low price, you can afford to equip everyone on your crew with an ID Pal. IDPAL LABEL CARTRIDGE SELECTION CHART Max. Service Part Number Part Number Part Number Roll Length Application Material/Color Temperature 0.375" (9.53 mm) 0.500" (12.70 mm) 0.750" (19.05 mm) Feet (m) Nylon Cloth B-499 / Black on White 194 (90) 30 days PAL PAL PAL (5.79 m) Vinyl B-439 / Black on White 104 (40) 30 days PAL PAL PAL (6.40 m) Vinyl B-439 / Black on Yellow 104 (40) 30 days PAL YL PAL YL PAL YL 21' (6.40 m) Vinyl B-439 / Black on Red 104 (40) 30 days PAL RD PAL RD PAL RD 21' (6.40 m) Vinyl B-439 / Black on Orange 104 (40) 30 days PAL OR PAL OR PAL OR 21' (6.40 m) Vinyl B-439 / Black on Green 104 (40) 30 days PAL GR PAL GR PAL GR 21' (6.40 m) Vinyl B-439 / Black on Blue 104 (40) 30 days PAL BL PAL BL PAL BL 21' (6.40 m) Polyester B-430 / Black on Clear 212 (100) 30 days PAL PAL PAL (6.40 m) Polyester B-423 / Black on White 248 (120) 30 days PAL PAL PAL (6.40 m) Plus each cartridge comes preloaded with its own application-specific ribbon. Application Key Smooth/Flat Surface Wire/Cable/Curved Surface Textured Surface Highly Textured Surface 6
7 Voice/Data Identification Materials Chart Brady Material # Print Technology Properties & Applications B-109 TLS 2200 Durable, tear resistant tag B-124 Laser A paper tag stock designed for desi-strip inserts and laser printing B-145 TLS 2200 Tear-resistant 2-side printable tag material B-361 Laser Low-profile self-laminating laser printable material B-412 TLS 2200 Durable tagstock for desi-strip inserts B-422 TLS 2200 / IDXPERT White label with an aggressive adhesive for textured plastics B-423 TLS 2200 / IDXPERT / ID Pal Electronic PCB ID and component bar code label and rating plate, outlet and patch panel identification B-425 TLS 2200 Tough, flexible label for flagging small fiber strands B-427 TLS 2200 / IDXPERT Self-laminating material for cable marking B-430 TLS 2200 / ID Pal Clear polyester material B-432 TLS 2200 Clear polyester with an aggressive adhesive for texture plastics B-439 TLS 2200 / ID Pal Vinyl label available in white, yellow, orange, red and other colors B-483 TLS 2200 / IDXPERT Ultra aggressive glossy polyester label for powder coated surfaces B-489 TLS 2200 Ultra aggressive matte polyester label for powder coated surfaces B-499 TLS 2200 / ID Pal Low-profile through-conduit wire marking, component and general labeling B-642 TLS 2200 Low-smoke and flame spread label for Plenum applications B-707 Laser White label with an aggressive adhesive for textured plastics B-712 Laser Clear label with an aggressive adhesive for textured plastics B-747 Laser White polyester label ANSI/TIA/EIA 606-A Standard OVERVIEW The ANSI/TIA/EIA 606-A Standard specifies administration for a generic telecommunications cabling system that will support a multi-product, multi-vendor environment. It provides a uniform administration approach that is independent of applications, which may change several times throughout the life of the telecommunications infrastructure. It establishes guidelines for owners, end users, manufacturers, consultants, contractors, designers, installers and facilities administrators involved in the administration of the telecommunications infrastructure. Use of this Standard is intended to increase the value of the system owner s investment in the infrastructure by reducing the labor expense of maintaining the system, extending the useful economic life of the system and providing effective service to users. CLASSES OF ADMINISTRATION There are four classes of administration that all cabling systems fall within: Class 1 is for systems within a single building having only one Telecommunications Room (TR) that all workstation cabling runs to. The TR, Horizontal Links (HL s) and Telecommunications Main Grounding Busbar (TMGB) are required to be labeled and administered. If the system owner wishes to document pathways or firestopping locations, Class 2 administration should be used. Class 2 is for systems within a single building that are served by multiple TR s. Class 2 includes administration for backbone cabling, multi-element grounding and bonding, firestopping as well as all the items within Class 1. Class 3 is for systems spanning multiple buildings, known as a campus environment. Class 3 includes administration for buildings and inter-building cabling as well as all elements of Class 2. Administration of Pathways, Spaces and Outside Plant elements is recommended. Class 4 is for systems spanning multiple campuses, known as multi-site system. Class 4 included administration for each site as well as all elements of Class 3. Administration of Pathways, Spaces and Wide area network connections is recommended. 7
8 ANSI/TIA/EIA 606-A Standard IDENTIFIERS Aunique identifier is associated with each element of the infrastructure to be identified and serves as the key to finding the recorded information within the administration system selected. Class of Administration Identifier Description of Identifier fs telecommunications space (TS) R R R R fs-an horizontal link R R R R fs-tmgb telecommunications main grounding busbar R 1 R 1 R 1 R 1 fs-tgb telecommunications grounding busbar R 1 R 1 R 1 R 1 fs1/fs2-n intrabuilding backbone cable R R R fs1/fs2-n.d intrabuilding backbone pair or optical fiber R R R f-fsln(h) firestop location R R R [b1-fs1]/[b2-fs2]-n interbuilding backbone cable R R R = Required O = Optional REQUIRED IDENTIFIERS & RECORDS The following is a list of the required records for each of the four classes of administration. An administration system shall provide a method to find the record associated with any specific identifier. The administration system may be managed using a paper-based system, general-purpose spreadsheet software, or special-purpose cable management software. Class 1 systems require the identifiers and records for the following: TS identifier Horizontal Links Telecommunications Main Grounding Busbar (TMGB) Telecommunications Grounding Busbar (TGB) Class 2 systems require the identifiers and records for the following: All class 1 elements Intra-building Backbone Cable Intra-building Backbone pair or strand Firestopping LABELING VISIBILITY AND DURABILITY Class of Administration Identifier Description of Identifier [b1-fs1]/[b2-fs2]-n.d interbuilding backbone pair or optical fiber R R b building R R c campus or site R fs-uuu.n.d(q) intrabuilding backbone pathway element O O O fs1/fs2-uuu.n.d(q) intrabuilding backbone pathway between O O O two TSs or areas [b1-fs1]/[b2-fs2]- interbuilding pathway or element O O UUU.n.d(q) Class 3 systems require the identifiers and records for the following: All class 2 elements Intra-building Backbone Cable Intra-building Backbone pair or strand Building Class 4 systems require the identifiers and records for the following: All class 3 elements Site or Campus The size, color and contrast of all labels should be selected to ensure that the identifiers are easily read. Labels should be visible during the installation of and normal maintenance of the infrastructure. Labels should be resistant to the environmental conditions at the point of installation (such as moisture, heat or ultraviolet light) and should have a design life equal to or greater than that of the labeled component. Mechanical generation To maximize legibility, all labels shall be printed or generated by a mechanical device and shall not be written by hand. Visit for more information. Download a free demo copy of labeling software View the Brady Label Finder, a complete list of labels for major hardware vendors DISTRIBUTED BY: Voice / Data Identification 2004/ West Good Hope Road, Milwaukee, WI U.S.A. CUSTOMER SERVICE PH:1-888-BRADYGO ( ) FX: TECHNICAL SUPPORT PH: FX: Call the Identification Service Group at or visit for worldwide locations 56 Leek Crescent, Richmond Hill, Ontario L4B 1H1 CANADA CUSTOMER SERVICE PH: FX: TECHNICAL SUPPORT PH: MS AN ISO-9001 REGISTERED FIRM 2004 BRADY Corporation, Printed in U.S.A. All rights reserved. Specifications subject to change without notice. MS KK
SECTION IDENTIFICATION FOR COMMUNICATIONS SYSTEMS
Part 1 General 1.1 Summary 1.1.1 This section shall govern the products and installation of identification and labeling of all required parts, pieces and accessories of the communications cabling system,
PERMASLEEVE MARKERS FROM BRADY
PERMASLEEVE MARKERS FROM BRADY Permanent Heat Shrink Wire Identification Brady's heat shrink PermaSleeve Markers provide permanent, legible identification for wires and cables.permasleeve Markers are suitable
SECTION COMMUNICATIONS COPPER BACKBONE CABLING
SECTION 27 13 13 COMMUNICATIONS COPPER BACKBONE CABLING PART 1 GENERAL 1.01 DESCRIPTION A. The work covered by this section of the Specifications includes all labor necessary to perform and complete such
Performance that matches your own
Performance that matches your own Table of Contents BMP 61.............................................. 3 Applications...................................................... 7 BMP 61 Media Offering................................
SECTION COMMUNICATIONS COPPER BACKBONE CABLING
PART 1 GENERAL 1.01 DESCRIPTION A. The work covered by this section of the Specifications shall include all labor necessary to perform and complete such construction, all materials and equipment incorporated
Brady B-595 Indoor/Outdoor Vinyl Tape for the GlobalMark Printer
Brady B-595 Indoor/Outdoor Vinyl Tape for the GlobalMark Printer Beginning March 1, 2010, Brady s leading outdoor grade vinyl for the GlobalMark Printer is being replaced by a new B-595 vinyl. This new
Identification Solutions
Identification Solutions This document provided by arr-thorp Electric Co., Inc. 800-43-9123 Contents POTALE PINTES AND LAELS 3 THEMAL TANSFE PINTES 6 THEMAL TANSFE LAELS 8 LASE LAELS 125 INK JET LAELS
Complete Labeling Solutions. Commercial Aerospace Military Defense Mass Transit Commercial Marine
Complete Labeling Solutions Commercial Aerospace Military Defense Mass Transit Commercial Marine Expect Performance Brady offers outstanding solutions in extreme environments for aircraft, military vehicles,
Communications Integrators, Inc. June S. Wilson Street, Suite 105 Tempe, Arizona Toll Free (800) Web Site
Communications Integrators, Inc. June 2008 2625 S. Wilson Street, Suite 105 Tempe, Arizona 85282 Toll Free (800) 679-9711 Web Site www.ciinet.com Product Guide Specification Specifier Notes: This product
Page PRODUCT DESCRIPTION
Page 1 2004-02-29 PRODUCT FEATURES BASIC USES / RELATED USES Identification bands or markings for facility piping. BradySnap-On / Strap-On Vinyl: For normal duty, mechanically fastened. Custom or Blank
Performance that matches your own
Performance that matches your own Table of Contents BMP 61.............................................. 3 Applications... 7 BMP 61 Media Offering... 10 Electrical, Voice/Datacom ID... 12 General & Industrial
One smart printer to print it all
One smart printer to print it all www.cablectrix.co.uk Content www.cablectrix.co.uk BMP 71 Printer & Accessories........................... 2 High Performance Industrial Identification / Safety Identification.......
Page PRODUCT DESCRIPTION
Page 1 2004-02-29 PRODUCT FEATURES BASIC USES / RELATED USES Self-adhesive identification bands or markings for facility piping, Self-StickingVinyl Weather-Code Outdoor Pipe Markers Medical Gas Pipe Markers
SECTION IDENTIFICATION FOR ELECTRONIC SAFETY AND SECURITY
SECTION 280553-IDENTIFICATION FOR ELECTRONIC SAFETY AND SECURITY PART 1 - GENERAL 1.1 DESCRIPTION A. This specification section covers the furnishing and installation of nameplates, labels, wire markers,
Performance that matches your own
Performance that matches your own Table of Contents BMP 61.............................................. 3 Applications...................................................... 6 BMP 61 Media Offering................................
One smart printer to print it all
One smart printer to print it all Content BMP 71 Printer & Accessories.... 2 High Performance Industrial Identification / Safety Identification... 10 General and Industrial Identification s.... 11 Wire
INDUSTRIAL, ELECTRONIC & ELECTRICAL IDENTIFICATION. BradyID.com. High-performance solutions for Industrial ID, Wire & Cable ID, Product ID and more.
INDUSTRIAL, ELECTRONIC & ELECTRICAL IDENTIFICATION High-performance solutions for Industrial ID, Wire & Cable ID, Product ID and more. Materials Printer Compatibility Identification Material Improve processes
T H E M O S T D U R A B L E F LO O R M A R K I N G TA P E Superior DURABILITY Easy APPLICATION High VISIBILITY www.bradycanada.ca www.bradylatinamerica.com Superior Durability Spend less time replacing
AESA TECHNOLOGY OF LAN CABLE
TECHNOLOGY OF LAN CABLE CONTENT CHAPTER INTRODUCTION CHAPTER LOCAL AREA NETWORK (LAN) CHAPTER STRUCTURED CABLING SYSTEM (SCS) CHAPTER OPTICAL FIBER CABLE CHAPTER STANDARD CHAPTER COPPER LAN CABLE DESIGN
A. Product Data: For each electrical identification product indicated.
SECTION 16075 - ELECTRICAL IDENTIFICATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
Workstation Outlets GigaFlex PS6+ Modules Category 6
C O M M E R C I A L N E T W O R K I N G C O P P E R 15.25 GigaFlex PS6+ Modules Category 6 AX101067 GigaFlex PS6+Module GigaFlex PS6+ Module The GigaFlex PS6+ Module is a punch down UTP connector based
Table of Contents. For Pre-Sales Support or Questions call
Printer Media Guide Table of Contents I. OVERVIEW: Printing with Barcodes PRINTER TYPES: Desktop vs. industrial PRINT METHOD: Direct thermal vs. thermal transfer PRINT MATERIAL: Choosing the right labels
Panduit 28 AWG Patch Cords Installation Guideline
Panduit 28 AWG Installation Guideline Panduit is a leading supplier of Structured Cabling Systems and Unified Physical Infrastructure. Panduit solutions enable the physical infrastructure to be scalable,
FOR INTERCONNECT AND CROSS-CONNECT APPLICATIONS
FOR INTERCONNECT AND CROSS-CONNECT APPLICATIONS HIGH SPEED DS-3 & DS-4 CABLES Belden Your Widest Selection for Meeting DS-3 and DS-4 Network Requirements BELDEN, THE CABLE TECHNOLOGY LEADER IN HIGH-SPEED
1. This Section specifies the ethernet Category 5E data cabling system for buildings and structures.
PAGE 271200-1 SECTION 271200 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
Content. - DDF Frame Pair Screen Cable Pair Screen Cable
Content - 120 1.1 Ohm 120ohm DDF DDF Accessories Cables 1.1.1 2 Pair Screen Cable - DDF Frame 1.1.2 4 Pair Screen Cable - 120 Ohm 1.1.3 DDF 8 Pair Cable Screen Cable 1.1.4 16 Pair Screen Cable 1.1.5 50
b. Army Reserve Design Process Submittal Requirements (DPSR) c. USARC G-2/6 IT Design Whitepaper, 26 Jun 2012 ( ENCLOSURE 1)
CELRL-PM-R July ARCOS BULLITEN - SUBJECT: IT Design. REFERENCE: a. Army Reserve IT Manual, Change b. Army Reserve Design Process Submittal Requirements (DPSR) c. USARC G-/ IT Design Whitepaper, Jun ( ENCLOSURE
SECTION ELECTRICAL IDENTIFICATION
SECTION 16075 ELECTRICAL IDENTIFICATION PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
MVP Plus Printers Section [01596] [ ] Page 1
![MVP Plus Printers Section [01596] [ ] Page 1](/thumbs/93/111130855.jpg "MVP Plus Printers Section [01596] [ ] Page 1")
2005-05-16 Page 1 This section includes a manufacturer's guide specification for a thermal tape/label printer - with sophisticated features and a range of accessories for project site usage. This section
SECTION COMMUNICATIONS COPPER OSP CABLING
SECTION 27 13 14 COMMUNICATIONS COPPER OSP CABLING PART 1 GENERAL 1.01 DESCRIPTION A. The work covered by this section of the Specifications includes all labor necessary to perform and complete such construction,
Caravan Materials. Engineered to Perform Better
Caravan Materials Engineered to Perform Better ORAFOL Europe GmbH ORAFOL s Worldwide Locations Headquarters Oranienburg, Germany 2 Engineered to Perform Better - www.orafol.com Index Caravan Materials
B. Division-16 Basic Materials and Methods section apply to work specified in this section.
Section 16745 PREMISE CABLING SYSTEMS PART ONE GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification
WIREMOLD Access 5000 Series Raceway
WIREMOLD Access 5000 Series Raceway Aesthetically Pleasing, Nonmetallic, Low-Profile, Multiple Channel Raceway System Access 5000 Raceway conceals and organizes electrical wiring and low-voltage cabling
onlinecomponents.com 150
150 900-147/900-148/900-149 Fish Tape 900-147 900-148 900-149 Made from flexible spring steel and black finish. Equipped with durable plastic container and slide handle. Easy to thread through the pipe
Innovations. in IDentification Management. Thermal Transfer Applications
Innovations in IDentification Management Thermal Transfer Applications Our Vision Nortec is a leading supplier of ID solutions for harsh environment, with an approach of innovation in ID management, with
Laminating System LS1000 Applicator
Data Sheet (Page 1 of 5) Description A no heat, non electric laminating applicator to laminate or apply transfer adhesive to documents in a variety of sizes, up to A3 format. It allows for professional
FEATURED PRODUCTS SECTION 1COMMSCOPE
SECTION 1COMMSCOPE 1 FEATURED PRODUCTS FiberGuard (tm) For installations where conduit or innerduct are typically installed, CommScope offers premise and indoor/outdoor fiber optic cables inside an interlocking
PROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
Full colour signs & labels in seconds
Full colour signs & labels in seconds Full colour, maximum impact signs & labels The BradyJet J5000 Colour Label Printer enables you to create full colour indoor signs and labels on demand. These will
INTRODUCING NORTEC GROUP
INTRODUCING NORTEC GROUP OCTOBER 2015 ABOUT NORTEC ACTIVITIES. A leading worldwide manufacturer of comprehensive custom-made solutions for IDentification and traceability in harsh environments. INDUSTRIES.
SECTION WIRE AND CABLES. A. The CONTRACTOR shall provide wires and cable, complete and operable, in accordance with the Contract Documents.
SECTION 26 05 19 PART 1 - GENERAL 1.1 THE REQUIREMENT A. The CONTRACTOR shall provide wires and cable, complete and operable, in accordance with the Contract Documents. 1.2 CONTRACTOR SUBMITTALS A. The
COMMON WORK RESULTS FOR INTEGRATED AUTOMATION DESIGN AND CONSTRUCTION STANDARD
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
DURA-MARK PTR2 Thermal Transfer Printer
DURA-MARK PTR2 Thermal Transfer Printer And Accessories Mechanical Information Create a variety of high quality, custom labels It s Quick! Custom capability allows labels to be produced in-house, anytime,
B-342 is available in white, yellow, black, red, orange, green, blue, violet, pink, gray, and brown. Details: RANGE OF WIRE DIAMETER (in)
Technical Data Sheet BRADY B-342 PERMASLEEVE MARKER TDS No. B-342 Effective Date: 04-Jun-2010 Description: GENERAL Print Technology: Thermal transfer and dot matrix Material Type: Irradiated polyolefin
IDENTIFICATION DEPOT, INC. 206 East Second Street Washington, NC PHONE FAX
Engraved Plastic Nameplates 1/16 rigid 2 ply blended acrylic extruded sheet with cap and core permanently fused together. Material is shatterproof and chip resistant. Matte finish meets ASTM D 709 Type
Label and Ribbon Guide
Label and Ribbon Guide Quick access to all the materials you need for radyprinter S3100, P 31, P 33, P 35 and P 37 Printers 1800 620 816 bradyid.com.au Innovative 30/33 materials lead the way in labelling
TABLE OF CONTENTS. Product Listing Index. Look for this symbol. It let s you know which products are available in 4-Color Process. BLUE FROG PRINTING
www.bluefrogprinting.net BFP16C The Roll Labels, Decals, Banners & Static Clings you ve come to expect and so much more! Product Listing Index Blue Frog Printing is proud to offer a large selection of
This attractive raceway conceals and
Access 5000 Nonmetallic Surface Raceway System 5000 Two-Piece Multiple Channel Raceway This attractive raceway conceals and organizes electrical wiring and low-voltage cabling in a sleek, handsome molding.
www.primeralabel.com Print your own high-quality product labels with Primera s new CX1000 Color Label Printer CX1000 makes it so fast and easy to produce your own labels in-house that you ll wonder how
Raydon Surface Coating Chart Standard
Page 1 of 6 1.0 PURPOSE The purpose of this Work Instruction (WI) is to provide a centralized list of Raydon surface treatments referenced indirectly in the workmanship standard (WS) WS EN 5050-4001 Surface
FX1200 Digital Label Finishing System Frequently Asked Questions Primera Technology, Inc.
FX1200 Digital Label Finishing System Frequently Asked Questions Primera Technology, Inc. (As of January 3, 2011) 1. What is the FX1200? FX1200 is an all-in-one, digitally-controlled label finishing system.
PROCESS SPECIFICATION PART MARKING STANDARDS
PROCESS SPECIFICATION PART MARKING STANDARDS PS00000019 DATE OF ISSUE 25 January, 2018 REVISION 02 PROPRIETARY NOTICE This document is not to be distributed or copied in part or in whole without written
Self Laminating Wire and Cable Markers
SBP Self Laminating Wire and Cable Markers Technical Datasheet TTDS-211 Revision 12 - December 2018 SBP is a clear vinyl film with a white thermal transfer printable area. On application, the clear film
DATASHEET. Data Center & Cloud Computing Infrastruture Solutions
Data Center & Cloud Computing DATASHEET 8 Channels 1470-1610nm Dual Fiber CWDM Mux Demux W/Expansion Port, FMU Plug-in Module, LC/UPC Data Center & Cloud Computing Infrastruture Solutions REV.1.0 2017
N Connector Installation Kits
N Connector Installation s ONE KIT PROVIDES EVERYTHING FOR LMR-400 N CONNECTOR INSTALLATION Refill part numbers in table below Each kit contains: Assembly Instructions Professional Grade Crimp Tool and
WIREMOLD AL7450 Series Isoduct Aluminum Raceway
Three-Channel, Dual-Cover, Prewired Aluminum Raceway System Isoduct AL7450 Series Raceway is a costeffective, highly aesthetic solution for providing access to communication cabling and electrical wiring
The 400, 800, and 2300 Series Raceways, from
400, 800, 2300, 2300D Series Small, Two-Piece, Nonmetallic Raceway Systems Ideal for Low Voltage and Power pplications The 400, 800, and 2300 Series Raceways, from Wiremold/Legrand, are a family of single
FX1200 Digital Label Finishing System Frequently Asked Questions Primera Technology, Inc.
FX1200 Digital Label Finishing System Frequently Asked Questions Primera Technology, Inc. (As of February 24, 2010) 1. What is the FX1200? FX1200 is an all-in-one, digitally-controlled label finishing
Technical Service Note
Technical Service Note TSNK180 Zooter Installation Description Date February 13, 2014 Updated February 12, 2014 Owner Audience Allotted Time Environment Distributed Networks Zooter cabling installers 18-24
PRODUCT CATALOG Banners Banner Stands Name Badges Table Covers BANNERS EXHIBIT ITEMS TABLE COVERS NAME BADGES
PRODUCT CATALOG 2016 Banners Banner Stands Name Badges Table Covers BANNERS EXHIBIT ITEMS TABLE COVERS NAME BADGES 2 ABOUT US BOOTH ACCESSORIES 3 TABLE OF CONTENTS Booth Accessories pg. 3 Banners pg. 4-5
SBP Self Laminating Wire and Cable Markers
SBP Self Laminating Wire and Cable Markers Technical Datasheet TTDS-211 Revision 10 - April 2018 SBP is a clear vinyl film with a white thermal transfer printable area. On application, the clear film over-laminates
The V2100 Series Steel Raceway provides wiring
V2100 Steel Raceway Two-Piece Surface Raceway The V2100 Series Steel Raceway provides wiring capacities for small to medium size installations. Power or Data/Communication Devices can be wired into the
(SIP) Structural Insulated Panel Laminating Technology, Training & Special Tools Packages
(SIP) Structural Insulated Panel Laminating Technology, Training & Special Tools Packages Marketing Kit Education & Training Panel Drawings On-Site Construction Tools Midwest Automation, a leading manufacturer
Brady B-595 Indoor/Outdoor Vinyl Tape for the GlobalMark Printer
Brady B-595 Indoor/Outdoor Vinyl Tape for the GlobalMark Printer Beginning March 1, 2010, Brady s leading outdoor grade vinyl for the GlobalMark Printer is being replaced by a new B-595 vinyl. This new
ABBREVIATED PRICE LIST
Crescent Print Edinburgh Ltd ABBREVIATED PRICE LIST This is a short version of our prices incorporating some of our most popular products / quantities. For different quantities or bespoke products please
KODAK Matchprint M150DP KODAK Matchprint M120DP
TECHNICAL DATA / WIDE-FORMAT INKJET MEDIA March 2009 719-01167A-A KODAK Matchprint M150DP KODAK Matchprint M120DP GENERAL DESCRIPTION Lightweight (6 and 7mil), easy-to-fold bond paper with matte finish
PANDUIT is a Solutions Enabler Partner for IP Communications within the Cisco Technology Developer Program.
P AN W A Y OFFICE FURNITURE RACEWAY PANDUIT is a Solutions Enabler Partner for IP Communications within the Cisco Technology Developer Program. PAN-WAY Extend the life of your office furniture investment
Electrical Identification
Electrical Identification i n n o v a t i o n y o u c a n i d e n t i f y w i t h. MARKING SERVICES INCORPORATED 8 0 0. 2 3 4. 0 1 3 5 8 0 0. 6 2 7. 6 4 3 2 F A X m a r k s e r v. c o m s a l e s @ m a
SECTION COMMON WORK RESULTS FOR HVAC
SECTION 23 05 00 COMMON WORK RESULTS FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball Valve. 2. Hangers and Supports. 3. Identification Tags and Sleeves. 1.2 INCLUDED SECTIONS A. Section
Electrical Overcurrent Studies
Electrical Overcurrent Studies 11-01-2011 Deliverables associated with electrical overcurrent studies are as follow : a. Draft Reports i. Construction Related Projects have the following draft reports
Category 7 A /Class F A Products
CATEGORY 7 A /CLASS F A PRODUCTS Category 7 A /Class F A Products Exceeding ISO/IEC category 7 A /class F A specifications, Siemonʼs fully shielded TERA endto-end cabling solution is the highest-performing,
SECTION IDENTIFICATION FOR FIRE SUPPRESSION PIPING AND EQUIPMENT
SECTION 21 05 53 IDENTIFICATION FOR FIRE SUPPRESSION PIPING AND EQUIPMENT Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2015-2015 ARCAT, Inc. - All rights reserved PART 1 GENERAL
VIPColor Technologies
VIPColor Technologies For over a decade VIPColor Technologies has been developing and manufacturing digital printing solutions, marketing them in 35 countries world wide. VIPColor solutions enable sales
HOOK-UP WIRE A STYLE TO SUIT ANY NEED
A STYLE TO SUIT ANY NEED Alpha s commitment to quality and service starts at the beginning... with the manufacturing of single conductor hook-up wire, the most basic wiring component. Used extensively
voice mail quickly deliver Long distance and transcontinental telephone operators at work. Circa innovations
voice mail quickly deliver Long distance and transcontinental telephone operators at work. Circa 1925. 58 Fiber Optic Cable Operators once placed all telephone calls. Now many phone systems direct you
P:
Available for sale at 3.22.18 P: 800.772.2001 www.papermartinc.com Offset Index White Papers Page Crack 'n Peel High Gloss, Satin Litho & Offset 3 High Gloss, Semi Gloss, Ultra Matte & Offset 4 FasTrack
Laser/Inkjet Labels Representative offering only, visit for a complete listing of products.
Laser/Inkjet Panduit is a global leader in reliable and innovative solutions for identification and safety. Products are engineered for a wide variety of industrial applications including electrical, electronics,
Signs, Posters & Banners
CONTENTS Signs, Posters & Banners Poly Bag Yard Signs...1 Double-Sided Yard S igns...2-3 Corrugated Plastic Yard Signs...4-7 Economy Corrugated Yard Signs...8 Custom Design Posters... 10-11 Banners...12-13
DATASHEET FMU-MC04E-A/B, Pair Packaged, w/expansion Port
Data Center & Cloud Computing DATASHEET FMU-MC04E-A/B, Pair Packaged, w/expansion Port 4 Channels Single Fiber CWDM Mux Demux, Plug-in Module, LC/UPC Data Center & Cloud Computing Infrastruture Solutions
Watermark Labelstm. a division of lustre-cal corporation
Watermark Labelstm a division of lustre-cal corporation tm Watermark Labels a division of lustre-cal corporation IN NOVEMBER 1964, Lustre-Cal Corporation began producing high quality labels for worldwide
Our engineered standard masking products provide COST-EFFECTIVE. precision solutions for your finishing application.
masking products A CaplugsTM Company 18704 South Ferris Place, Rancho Dominguez, CA 90220 Toll Free: 1.888.227.5847 Fax: 310.537.7770 www.shercon.com sales@shercon.com www.caplugs.com sales@caplugs.com
AMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
Page PRODUCT DESCRIPTION
Page 1 2003-02-26 PRODUCT FEATURES! BASIC USES / RELATED USES " Identification bands or markings for facility piping. # (Ultra-mark) Wrap-Around Polyester: For harsh environments, outdoor piping systems,
DATASHEET. Data Center & Cloud Computing Infrastruture Solutions
Data Center & Cloud Computing DATASHEET 18 Channels Dual Fiber CWDM Mux Demux + Monitor Port 1270-1610nm, 1U Rack Mount, LC/UPC Data Center & Cloud Computing Infrastruture Solutions REV.1.0 2017 01 Overview
Main catalogue. SNK Series Terminal Blocks Accessories Marking Solutions
Main catalogue SNK Series Terminal Blocks Accessories Marking Solutions 10 5.2 mm m 0.205 in spacing 53 2.09" 26.7 1.05" 3 4 5 6 7 8 9 10 Save space by connecting s up to 4 mm2 (CB certified) 12 AWG in
Installation Guidelines, 10Gig SFP+ Direct Attach Copper Cable Assembly PN533A
Installation Guidelines, 10Gig SFP+ Direct Attach Copper Cable Assembly Introduction As virtualization, consolidation, and convergence initiatives continue to expand in Data Centers, so do the demands
Political Product Guide. 2' x 3' #3309P - 2 ³ ₄" Dia. CAMPAIGN ESSENTIALS
Political Product Guide # # 3¹ 2' x 3' #1060 - mets Grom 4 #3309P - 2 ³ ₄" Dia. CAMPAIGN ESSENTIALS 2016 CONTENTS Signs Posters & Banners Double-Sided Yard Signs...1-3 Poly Bag Yard Signs...4 Economy Corrugated
IMAGENET TM SYSTEM Facility Site Preparation
IMAGENET TM SYSTEM Facility Site Preparation PHOTO IMAGING WORKSTATION CAMERA AND LIGHTING GUIDELINES FOR YOUR LOCAL LAW ENFORCMENT, INFORMATION TECHNOLOGIES, MAINTENANCE PERSONNEL AND ELECTRICAL CONTRACTOR
LAUSD Facilities Technology Program Management Group
LAUSD Facilities Technology Program Management Group 034 Mignonette Street Los Angeles, CA 9006 Ph #: 3-0-690 Fax: 3-48-8475 Date: 0/07/04 To: LAUSD/New Facilities Project Management From: Stefan Brown
MAGICSTRAP Application Note Murata part number : LXMS31 series
1. General descriptions Murata MAGICSTRAP is an innovative RFID module with a wide range of RF features. It incorporates an industry standard IC. [Features] 1-1. Compliant to EPC global Class1Gen2 1-2.
ADVANCED FLAT CABLE SOLUTIONS
ADVANCED FLAT CABLE SOLUTIONS ONTENTS Contents F Flat Ribbon Cable Overview 03 Microzip Summary Sheet 04 Microzip TPO Solid & Stranded 0.025 inch (0.635 mm) 05 Microzip PVC Solid & Stranded 0.025 inch
Hi5 s Expert Guide to Specify afix Lecture Hall Tables
Hi5 s Expert Guide to Specify afix Lecture Hall Tables Table Tops Page 2 Table Edges Page 3 Bases Page 4 6 Modesty Panels Page 7 Power Page 8 Wire Management Page 9 ADA Tables Page 10 Finish Choices Page
Keg Collars. Keg Wraps
Keg Collars Keg Collars fit over and grip the keg stem. They are often used to identify date of manufacture, flavor, size and applicable government warning. Spot Color Keg Collars 6½" dia. Spot Color Keg
1.000 IN W X IN H
.000 IN W X 0.500 IN H THT597270 BRADY http://www.bradyid.com/enus/tht597270/prod596236.html of 2 2//205 8: AM Welcome to Brady 85536953 Contact Us Login / Register The Brady Advantage Find a Brady Distributor
METAL GROUNDING AND BONDING
METAL GROUNDING AND BONDING Hubbell's full line of grounding and bonding products will protect and secure active equipment from harmful electrical interference. These products provide the best performance
FMU-MC09-A/B, Pair Packaged DATASHEET. Data Center & Cloud Computing Infrastruture Solutions
Data Center & Cloud Computing DATASHEET FMU-MC09-A/B, Pair Packaged 9 Channels Single Fiber CWDM Mux Demux, Plug-in Module, LC/UPC Data Center & Cloud Computing Infrastruture Solutions REV.1.0 2018 Overview
Save Time and Money by Producing Your Own Full-Colour Product Labels
Primera Technology, Inc. White Paper Save Time and Money by Producing Your Own Full-Colour Product Labels Introduction Manufacturers of almost any type of product often find themselves in need of short-run,
Excavating, Backfilling, and Compaction for Utilities Piping (Plumbing).
SECTION 15047 - IDENTIFICATION PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Identification including necessary accessories indicated on Construction Documents and specified in this section or as required
New Product Bulletin. Belden Digital Audio Cable. Belden Brilliance AES/EBU
New Product Bulletin NP 267 Belden Digital Audio Cable Belden Brilliance AES/EBU Digital Audio Cable, Part No. 1353A, is a robust single-pair Cat 5e patch cord that utilizes Belden s exclusive Bonded-Pair
SECTION CABLE TRAYS
SECTION 16139 CABLE TRAYS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,