ADVANCED FLAT CABLE SOLUTIONS

Transcription

1 ADVANCED FLAT CABLE SOLUTIONS

2 ONTENTS Contents F Flat Ribbon Cable Overview 03 Microzip Summary Sheet 04 Microzip TPO Solid & Stranded inch (0.635 mm) 05 Microzip PVC Solid & Stranded inch (0.635 mm) 06 Ribbon Stranded PVC inch (0.845 mm) & inch (1 mm) 07 PVC Rainbow Ribbon inch (1.27 mm) 08 PVC Stranded & Hi-Flex 7 and 19 Stranded inch (1.27 mm) 09 TPO Stranded Flat Ribbon inch (1.27 mm) 10 Solid Microzip Low Smoke Zero Halogen (LSZH) inch (0.635 mm) 11 Stranded Ribbon Low Smoke Zero Halogen (LSZH) inch (1.27 mm) 11 PVC Stranded Wide Pitch Ribbon inch (2.54 mm), Inch (3.96 mm) 12 Shielded and Jacketed Flat Ribbon 13 Manufacturing Overview 14 Flat MQT MQT (Micro-Quick Twist) Ribbon Summary Sheet & Data 15 PVC Stranded Micro Quick-Twist inch (0.635 mm) 16 TPO Stranded & Solid Micro Quick-Twist inch (0.635 mm) 17 Registered to ISO 9001: 2008 REACHCompliant Round to Flat Round to Flat Ribbon 18 Other Hitachi Products Other Products offered by Hitachi Cable America 19 Every effort has been made to ensure the accuracy of the data in this catalog. HCA cannot, however, assume responsibility for any typographical error which may have occurred. Print Version 9/ Contents

3 LAT RIBBON Flat Ribbon Cable The process for making great flat cable is simple. Start with the best materials. Then have the cable built by world class manufacturing personnel with the best equipment and tooling available. We run to the tightest tolerances in the industry with regards to the span and width of our ribbon cables ensuring consistent compatibility with your connector. With Hitachi Cable America you can feel confident specifying our cables to meet your needs for both electrical as well as physical performance. When faced with design issues for electrical performance, Hitachi Cable America has a variety of compounds to meet your specific environmental and electrical needs. Our commitment to excellence also means that we are globally competitive using state of the art equipment and manufactuing processes for ultimate efficiency. The products in this catalog are representative of Hitachi Cable s technical design abilities and manufacturing expertise in flat cable. For Standard & Custom Design Flat Cable: Call Us... Hitachi Cable America. Flat Ribbon 3

4 ICROZIP Microzip - Flat Ribbon Summary Sheet M PVC UL Styles: V 105 C V 105 C TPO UL Styles: V 105 C Full extrusion construction providing the tightest pitch tolerance in the industry Contoured for easy IDC termination Offered with both stranded and solid conductors Suitable for SE, MSE, LVD, MLVD, SCSI, Ultra-ATA and other internal wiring applications REACH and RoHS 2 compliant Capacitance Impedance Propagation HCA Series No. Pitch inch (mm) Conductor AWG Stranding Insulation UL Style AWM 1 pf/ft. (pf/m) (G-S) pf/ft. (pf/m) (G-S-G) (G-S-G) (Ohms) SE (G-S) (Ohms) Diff. Delay ns/ft (ns/m) Skew ps/ft (ps/m) (max.) Page (0.635) 30 7/38 TC PVC (51.8) (76.4) (5.31) 30 (98) (0.635) 30 1/30 BC PVC (46.5) 25 (82.0) (4.98) 36 (118) (0.635) 30 7/38 TC TPO (28.8) 15.7 (51.5) (4.72) 30 (98) (0.635) 31 7/39 TC TPO (30.9) (51.6) (4.65) 40 (131) (0.635) 30 1/30 SC TPO (29.8) 15.5 (50.8) (4.75) 25 (82) (0.845) 30 7/38 TC PVC (47.2) (73.8) (5.15) 60 (192) (1.0) 30 7/38 TC PVC (32.8) (54.8) (4.78) 25 (82) (1.0) 28 7/36 TC PVC (40.3) (72.5) (4.78) 50 (164) 7 Note 1: UL 758 Standard for Appliance Wiring Material (AWM) Note 2: For terms and abbreviations, please reference our Advanced Cabling Solutions catalog and under our Advanced Materials and FAQ sections on our website. 4 Microzip Summary

5 ICROZIP TPO Solid & Stranded inch (0.635 mm) Microzip UL Style: 20848* CSA Style: AWM I A/B FT- 1 UL Voltage Rating: 150V CSA Voltage Rating: 150V UL Temp: 105 C CSA Temp: 105 C Tightest pitch tolerance in the industry Solid conductor construction for lower cost and higher impedance Operating temperature: -50 deg C to +105 deg C APPLICATIONS Ultra ATA 133 and Ultra 160 SCSI, backwards compatible Internal interconnections for electronic equipment REACH and RoHS 2 compliant PHYSICAL CONSTRUCTION DESCRIPTION These Microzip cables utilize 30 AWG solid or stranded copper extruded with Thermoplastic Olefin (TPO). A polarity stripe is co-extruded into position number one for easy identification and the stripe will not rub off. Standard color is light yellow with a red polarity stripe for 30 AWG and a violet polarity stripe for 32 AWG. Pitch Tolerance.0016 inches (.040 mm) Pitch: in (0.635 mm) XX - P - 00YYY Conductor AWG: 30 7/38 AWG TC Insulation: TPO Conductor Resistance ohms/1000 ft (ohms/km): 106 (347.68) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 15.7(51.5) (G-S-G) pf/ft (pf/m): 25 (82) Impedance (G-S-G) SE - Single End: 82 ohms (G-S) Differential: 123 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.44 (4.72) Maximum Skew ns/ft (ns/m): (0.098) Pitch: in (0.635 mm) XX - P - 00YYY Conductor AWG: 30 1/30 AWG SC Insulation: TPE Conductor Resistance ohms/1000 ft (ohms/km): 104 (341.12) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 9.1 (29.84) (G-S-G) pf/ft (pf/m): 15.5 (50.84) Impedance (G-S-G) SE - Single End: 90 ohms (G-S) Differential: 130 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.45 (4.75) Maximum Skew ns/ft (ns/m): (0.082) Example P Example P Building a XX - P - 00YYY XX 00YYY XX= No. of conductors: 26, 34, 40, 50, 64, 68, 80 YYY = (ft.): 100 Example P Example P Building a XX= No. of conductors: 34, 50, 68, 80 YYY = (ft.): 100, ft m XX - P - 00YYY XX 00YYY Width: in (16.51 mm) Span: in (15.87 mm) Width: 2.00 in (50.80 mm) Span: in (50.16 mm) Width: XX *.025 in Span: XX *.025 in Width: in (21.59 mm) Span: in (20.95 mm) Width: 2.00 in (50.80 mm) Span: in (50.16 mm) Width: XX *.025 in Span: XX *.025 in Other conductor counts and put-ups available upon request. Other variations include 24 AWG and 26 AWG cables. *Series and also offered as UL AWM 150V solutions (20647) upon special request 5 Microzip TPO Solid & Stranded

6 ICROZIP Microzip PVC Solid & Stranded inch (0.635 mm) R UL Style: 2678 CSA Style: AWM I A/B FT- 1 UL Voltage Rating: 150V CSA Voltage Rating: 150V UL Temp: 105 C CSA Temp: 105 C Tightest pitch tolerance in the industry Solid conductor construction for lower cost and higher impedance Operating temperature: -20 deg C to +105 deg C APPLICATIONS Ultra ATA 133 and Ultra 160 SCSI, backwards compatible Internal interconnections for electronic equipment REACH and RoHS 2 compliant Note: thickness is RED POLARITY STRIPE ON #1 COND EDGE. PHYSICAL CONSTRUCTION DESCRIPTION This Microzip consists of 30 AWG solid bare or stranded tinned copper. are then fully extruded with PVC insulation. A red polarity stripe is added to the first conductor for easy identification. Standard color is gray. Pitch Tolerance =.0016 inches (.040 mm) Pitch: in (0.635 mm) XX - P - 00YYY Conductor AWG: 30 1/30 AWG BC Insulation: PVC Conductor Resistance ohms/1000 ft (ohms/km): 104 (34.12) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 14.2 (46.57) (G-S-G) pf/ft (pf/m): 25 (82) Impedance (G-S-G) SE - Single End: 80 ohms (G-S) Differential: 130 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.52 (4.98) Maximum Skew ns/ft (ns/m): (0.118) Pitch: in (0.635 mm) XX - P - 00YYY Conductor AWG: 30 7/38 AWG TC Insulation: PVC Conductor Resistance ohms/1000 ft (ohms/km): 106 (347.68) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 15.8 (51.82) (G-S-G) pf/ft (pf/m): 23.3 (76.424) Impedance (G-S-G) SE - Single End: 75 ohms (G-S) Differential: 110 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.62 (5.31) Maximum Skew ns/ft (ns/m): (0.098) Example P Example * - P Building a 400 ft m XX - P - 00YYY XX 00YYY XX= No. of conductors: 20, 25, 26, 34, 40, 50, 60, 68, 80, 100 (100 = 11*) YYY = (ft.): 100, 400 Example P Example * - P Building a 400 ft m XX - P - 00YYY XX 00YYY XX= No. of conductors: 20, 25, 26, 34, 40, 50, 60, 68, 80, 100 (100 = 11*) YYY = (ft.): 100, 400 Width:.500 in (12.7 mm) Span:.475 in (12.1 mm) Width: 2.50 in (63.5 mm) Span: in (62.85 mm) Width: XX *.025 in Span: XX *.025 in Width: in (6.35 mm) Span: in (5.72 mm) Width: 2.50 in (63.5 mm) Span: in (62.85 mm) Width: XX *.025 in Span: XX *.025 in Also available: 20009/xx for 31 AWG stranded SPC, 20021/xx for 32 AWG stranded SPC, and 20034/xx for 32 AWG solid SPC. Other conductor counts and put-ups available upon request. 6 Microzip PVC Solid & Stranded

7 IBBON Ribbon Stranded PVC inch (0.845 mm) & inch (1 mm) UL Style: 2678 / 2651 CSA Style: AWM I A/B FT- 1 UL Temp: 105 C CSA Voltage Rating: 150V/300V UL2678: 150V, UL2651: 300V CSA Temp: 105 C P Easy IDC termination Pitch tolerance.002 inches ( mm) (.845 mm) and 1mm pitch for hard drives Solid electrical performance in a low cost design Manufactured with 30 and 28 AWG stranded tinned copper APPLICATIONS Disk drives REACH and RoHS 2 compliant PHYSICAL CONSTRUCTION DESCRIPTION HCA s series 23124, and are constructed with stranded tinned copper. are fully extruded with flexible gray PVC compound Pitch: in (1.0 mm) XX - P - 00YYY Conductor AWG: 30 7/38 AWG TC Insulation: PVC Conductor Resistance ohms/1000 ft (ohms/km): 106 (347.68) Capacitance Ground-Signal (G-S) pf/ft (pf/m): (32.89) (G-S-G) pf/ft (pf/m): (54.8) Impedance (G-S-G) SE - Single End: 100 ohms (G-S) Differential: 140 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.46 (4.78) Maximum Skew ns/ft (ns/m): (0.082) Pitch: in (1.0 mm) XX - P - 00YYY Conductor AWG: 28 7/36 AWG TC Insulation: PVC Conductor Resistance ohms/1000 ft (ohms/km): 67.5 (221.40) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 12.3 (40.3) (G-S-G) pf/ft (pf/m): 22.1 (72.4) Impedance (G-S-G) SE - Single End: 90 ohms (G-S) Differential: 125 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.46 (4.78) Maximum Skew ns/ft (ns/m): (0.164) Example P Example P Building a XX - P - 00YYY XX 00YYY XX= No. of conductors: 10, 20, 34, 40, 50 YYY = (ft.): 100 Example P Example P Building a XX - P - 00YYY XX 00YYY XX= No. of conductors: 96, other conductor counts available upon request YYY = (ft.): 100 Width: in (27.94 mm) Span: in (27.30 mm) Width: in (31.75 mm) Span: in (31.11 mm) Width: XX *.039 in Span: XX*.039 in Width: in (6.30 mm) Span: in (5.72 mm) Width: 2.00 in (50.80 mm) Span: in (50.16 mm) Width: XX *.039 in Span: XX*.039 in Pitch: in (0.845 mm) XX - P - 00YYY Conductor AWG: 30 7/38 AWG TC Insulation: PVC Conductor Resistance ohms/1000 ft (ohms/km): 106 (347.68) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 14.4 (47.23) (G-S-G) pf/ft (pf/m): 22.5 (73.8) Impedance (G-S-G) SE - Single End: 89.3 ohms (G-S) Differential: ohms Propagation Delay Nanoseconds/ft (ns/m): 1.57 (5.14) Maximum Skew ns/ft (ns/m): 0.06 (0.19) Example P Building a XX - P - 00YYY XX 00YYY XX= No. of conductors: 96, other conductor counts available upon request YYY = (ft.): 100 Width: in (60.96 mm) Span: in (60.32 mm) Width: XX *.033 in Span: XX*.033 in Other conductor counts and put-ups available upon request. All data is for reference only and is subject to change. Ribbon Stranded PVC 7

8 RAINBOW P Rainbow Ribbon UL Style: UL Voltage Rating: 150V inch (1.27 mm) UL Temp: 80 C Pitch tolerance inches (.0762mm) PVC insulated conductors Intermittently heat bonded increases flexibility Bonded section repeats every 6.25 inches ( mm) IDC termination section 1.25 inches (31.75 inches) wide APPLICATIONS Internal wiring of appliances, electronic computers or business equipment PHYSICAL CONSTRUCTION DESCRIPTION This inch (1.27 mm) flat Rainbow Ribbon cable is constructed with individually extruded 28 AWG (7/36 stranded TC). All primaries are then pulled parallel and bonded intermittently (BI). Color sequence: ten unique colors: Brown, Red, Orange, Yellow, Green, Blue, Violet, Gray, White, Black and repeat Pitch: in (1.27 mm) XX - P - 00YYY Conductor AWG: 28 7/36 AWG TC Insulation: PVC- BI Conductor Resistance ohms/1000 ft (ohms/km): 69.5 (227.96) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 10.9 (35.752) (G-S-G) pf/ft (pf/m): 17.3 (56.744) Impedance (G-S-G) SE - Single End: 90 ohms (G-S) Differential: 126 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.55 (5.08) Maximum Skew ns/ft (ns/m): (0.164) Example P Example P Building a XX - P - 00YYY 200 ft m 200 ft m XX 00YYY Width: in (6.30 mm) Span: in (5.72 mm) Width: in (38.10 mm) Span: in (37.46 mm) Width: XX *.050 in Span: XX*.050 in XX= No. of conductors: 10, 14, 16, 20, 26, 30, 34, 40, 50, 60 YYY = (ft.): 200 Other conductor counts and put-ups available upon request. Other variations include 30 AWG and 26 AWG (20074) cables. PVC - BI: Intermittently Heat bonded PVC insulated wires with no lamination tapes. Spacing between bonded section is 6.25 inches ( mm) UL Style: CSA listing: AWM I A/B FT-1 UL Voltage Rating: 300V CSA Voltage Rating: 300V UL Temp: 105 C CSA Temp: 105 C Pitch tolerance inches (.0762mm) Continuous bonded. Individually color coded conductors for easy identification in discrete wire termination Fully extruded construction. No lamination tapes to impede termination Well centered conductors ensure reliable IDC termination APPLICATIONS Internal wiring of electronic equipment Pitch: in (1.27 mm) XX - P - 00YYY Conductor AWG: 28 7/36 AWG TC Insulation: SR-PVC/PVC Conductor Resistance ohms/1000 ft (ohms/km): 67.5 (221.4) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 7.48 (24.53) (G-S-G) pf/ft (pf/m): (46.08) Impedance (G-S-G) SE - Single End: 98 ohms (G-S) Differential: 135 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.45 (4.75) Maximum Skew ns/ft (ns/m): (0.28) Example P Example P Building a XX - P - 00YYY XX 00YYY Width: in (5.71 mm) Span: in (5.08 mm) Width: 1.60 in (40.64 mm) Span: in (40.00 mm) Width: XX *.050 in Span: XX*.050 in XX= No. of conductors: 09, 10, 14, 15, 16, 20, 24, 25, 26, 34, 37, 40, 50, 60, 64 YYY = (ft.): 100 Other conductor counts and put-ups available upon request. Available in 26 AWG (20002) and 30 AWG (20042). 8 Rainbow Ribbon

9 VC PVC Stranded & Hi-Flex 7 and 19 Strand inch (1.27 mm) UL Style: 2651 CSA listing: AWM I A/B FT-1 UL Voltage Rating: 300V CSA Voltage Rating: 300V UL Temp: 105 C CSA Temp: 105 C Symmetrical profile offers easy conductor separation (zip) without cable damage and allows reverse termination inch (1.27mm) pitch for use with today s low cost IDC connectors Design for use with high speed automated termination equipment APPLICATIONS Internal wiring of electronic equipment PHYSICAL CONSTRUCTION DESCRIPTION is extruded gray PVC flat planar cable using 28 AWG (7/36) tinned copper, on inch (1.27mm) centers is Hi-Flex extruded gray PVC flat planar cable using 28 AWG stranded (19/40) tinned copper, inch (1.27 mm) centers. Conductor number one is marked with a red polarity stripe Standard Flex Pitch: in (1.27 mm) XX - P - 00YYY Conductor AWG: 28 7/36 AWG TC Conductor Resistance ohms/1000 ft (ohms/km): 67.5 (221.4) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 8.90 (29.19) (G-S-G) pf/ft (pf/m): 14.0 (45.92) Impedance (G-S-G) SE - Single End: 105 ohms (G-S) Differential: 145 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.40 (4.59) Maximum Skew ns/ft (ns/m): (0.114) Example P Example P Building a XX - P - 00YYY XX 00YYY XX= No. of conductors: 6, 9, 10, 12, 14, 15, 16, 20, 24, 25, 26, 30, 34, 36, 37, 40, 50, 60, 64 YYY = (ft.): 100 Width: in (6.30 mm) Span: in (5.72 mm) Width: in (38.10 mm) Span: in (37.46 mm) Width: XX *.050 in Span: XX*.050 in Hi-Flex Pitch: in (1.27 mm) XX - P - 00YYY Conductor AWG: 28 19/40 AWG TC Conductor Resistance ohms/1000 ft (ohms/km): 63.1 (206.96) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 8.36 (27.42) (G-S-G) pf/ft (pf/m): (51.66) Impedance (G-S-G) SE - Single End: 101 ohms (G-S) Differential: 142 ohms Propagation Delay Nanoseconds/ft (ns/m): 2.90 (9.51) Maximum Skew ns/ft (ns/m): (0.164) Example P Example P Building a XX - P - 00YYY XX 00YYY XX= No. of conductors: 10, 20, 26, 34, 40, 50 YYY = (ft.): 100 Width: in (6.30 mm) Span: in (5.72 mm) Width: in (31.75 mm) Span: in (31.11 mm) Width: XX *.050 in Span: XX*.050 in Other conductor counts and put-ups available upon request. Available in tinned overcoat copper (20069), 30 AWG Solid TC (20052), 28 solid TC (23197), and 26 AWG stranded TC (23043). Other Putup lengths possible. Contact factory for details. PVC Stranded and High-Flex 9

10 PO TPO Stranded Flat Ribbon UL Style: CSA listing: AWM I A/B FT-1 UL Voltage Rating: 300V CSA Voltage Rating: 300V UL Temp: 105 C CSA Temp: 105 C inch (1.27 mm) L TPO insulated for superior electrical performance, i.e. high impedance and low capacitance Outstanding low temperature characteristics Improved heat aging over conventional PVC Available in other wire sizes APPLICATIONS Ideal for higher controlled impedance signals PHYSICAL CONSTRUCTION DESCRIPTION This inch (1.27mm) flat ribbon cable is constructed with 28 AWG stranded tinned copper then fully extruded with a Thermoplastic Olefin (TPO). A red stripe is applied for polarity identification Pitch: in (1.27 mm) XX - P - 00YYY Conductor AWG: 28 7/36 AWG TC Insulation: TPO Conductor Resistance ohms/1000 ft (ohms/km): 67.5 (221.4) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 5.60 (18.3) (G-S-G) pf/ft (pf/m): 9.70 (31.81) Impedance (G-S-G) SE - Single End: 106 ohms (G-S) Differential: 145 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.26 (4.13) Maximum Skew ns/ft (ns/m): (0.065) Example P Example P Building a XX - P - 00YYY XX 00YYY XX= No. of conductors: 20, 34, 40, 50 YYY = (ft.): 100 Width: in (12.70 mm) Span: in (12.06 mm) Width: in (31.75 mm) Span: in (31.11 mm) Width: XX *.050 in Span: XX*.050 in Other conductor counts and put-ups available upon request. Other variations include 24 AWG and 26 AWG cables. 10 TPO Stranded Flat Ribbon

11 SZH Solid Microzip Low Smoke Zero Halogen (LSZH) inch (0.635 mm) UL Style: (Pending) CSA Style: AWM I A/B FT- 1 UL Voltage Rating: 30V CSA Voltage Rating: 30V UL Temp: 105 C CSA Temp: 105 C Pitch 025 (0.635 mm) Low smoke zero halogen polyolefin thermoplastic ECO friendly APPLICATIONS Ultra ATA 33, 66, 100 and 133. Internal wiring of electronic equipment REACH and RoHS 2 compliant PHYSICAL CONSTRUCTION DESCRIPTION This Microzip consists of 30 AWG solid bare copper. Each leg of copper is pulled in parallel and fully extruded. A polarity stripe is co-extruded into position number one for easy identification. Color is green with black polarity Pitch: in (0.635 mm) XX - P - 00YYY Conductor AWG: 30 1/30 AWG BC Insulation: LSZH Conductor Resistance ohms/1000 ft (ohms/km): 104 (341.12) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 12.5 (41.01) (G-S-G) pf/ft (pf/m): 22.0 (72.17) Impedance (G-S-G) SE - Single End: 80 ohms (G-S) Differential: 130 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.60 (5.25) Maximum Skew ns/ft (ns/m): (0.196) Other conductor counts and put-ups available upon request. All data is for reference only and is subject to change. Example P Example P Building a 400 ft m 400 ft m XX - P - 00YYY XX 00YYY XX= No. of conductors: other conductor counts available upon request YYY = (ft.): 400 Width: in (43.18 mm) Span" in (42.54 mm) Width: in (38.10 mm) Span: in (37.46 mm) Width: XX *.050 in Span: XX*.050 in Stranded Ribbon Low Smoke Zero Halogen (LSZH) inch (1.27 mm) UL Style: (Pending) CSA listing: AWM I A/B FT-1 UL Voltage Rating: 30V CSA Voltage Rating: 30V UL Temp: 105 C CSA Temp: 105 C Symmetrical profile offers easy conductor separation without cable damage and allows reverse termination inch (1.27mm) pitch for use with today s low cost IDC connectors Design for use with high speed automated termination equipment APPLICATIONS Internal wiring of electronic equipment Pitch: in (1.27 mm) XX - P - 00YYY Conductor AWG: 28 7/36 AWG TC Conductor Resistance ohms/1000 ft (ohms/km): 67.5 (221.4) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 12.5 (41.01) (G-S-G) pf/ft (pf/m): 7.5 (24.60) Impedance (G-S-G) SE - Single End: 95 ohms (G-S) Differential: 135 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.60 (5.25) Maximum Skew ns/ft (ns/m): (0.196) Other conductor counts and put-ups available upon request. Available in tinned overcoat copper (20069), 30 AWG Solid TC (20052), 28 solid TC (23197), and 26 AWG stranded TC (23043). Other Put-up lengths possible. Contact factory for details. Example P Example P Building a XX - P - 00YYY XX 00YYY XX= No. of conductors: 06, 09, 10, 12, 14, 15, 16, 20, 24, 25, 26, 30, 34, 36, 37, 40, 50, 60, 64 YYY = (ft.): 100 Width: in (3.81 mm) Span: in (3.17 mm) Width: 1.60 in (40.64 mm) Span: in (40.00 mm) Width: XX *.050 in Span: XX*.050 in Solid & Stranded Microzip Low Smoke Zero Halogen 11

12 IDE PITCHS PVC Stranded Wide Pitch Ribbon inch (2.54 mm) Inch (3.96 mm) UL Style: 2651 CSA listing: AWM I A/B FT-1 UL Voltage Rating: 300V CSA Voltage Rating: 300V UL Temp: 105 C CSA Temp: 105 C Rounded edge construction Dual zip construction between each web Multiple gauges available to meet your specific needs Alternate copper coatings and configurations available APPLICATIONS Internal wiring of electronic equipment inch (3.96mm) Multiple wire sizes available Well centered conductors ensure reliable IDC termination APPLICATIONS Internal wiring of electronic equipment POLARITY STRIPE ON #1 COND EDGE. T PHYSICAL CONSTRUCTION DESCRIPTION Flat planar cable using 22, 24, or 26 AWG stranded tinned copper, extruded in PVC on inch (2.54 mm) centers. Conductor number one is marked with a polarity stripe. Standard cable color is gray XX-P-00YYY XX-P-00YYY XX-P-00YYY XX-P-00YYY XX-P-00YYY XX-P-00YYY XX-P-00YYY XX-P-00YYY XX-P-00YYY XX-P-00YYY XX-P-00YYY XX-P-00YYY Conductor 26 AWG (7/34) TC 24 AWG (7/32) TC 22 AWG (7/30) TC 22 AWG (7/30) TC 20 AWG (7/28) TC 18 AWG (19/30) TC 26 AWG (7/34) TTC 24 AWG (7/32) TTC 22 AWG (7/30) TTC 22 AWG (7/30) TTC 20 AWG (7/28) TTC 18 AWG (19/30) TTC Conductor Resistance Ohms/1000 Ft 20 deg C (Ohms/Km) Capacitance pf/ft (pf/m) Impedance (Ohms) G-S-G 42.5 (139.4) 12 (39.36) (84.2) 13 (42.64) (49.2) 12 (39.36) (55.1) 10 (32.8) (33.78) 11 (36.08) (19.9) 10 (32.8) (141.3) 12 (39.36) (86.92) 13 (42.64) (49.2) 12 (39.36) (55.1) 10 (32.8) (33.78) 12.6 (41.32) (19.9) 10 (32.8) 125 Pitch Inch mm in Width: in (16.51 mm) 2.54 mm Span: in (15.87 mm) in Width: in (15.24 mm) 2.54 mm Span: in (12.60 mm) in Width: in (13.97 mm) 2.54 mm Span: in (13.33 mm) in Width: in (13.97 mm) 3.96 mm Span: in (13.33 mm) in Width: in (12.70 mm) 3.96 mm Span: in (12.06 mm) in Width: in (11.43 mm) 3.96 mm Span: in (10.79 mm) in Width: in (16.51 mm) 2.54 mm Span: in (15.87 mm) in Width: in (15.24 mm) 2.54 mm Span: in (12.60 mm) in Width: in (13.97 mm) 2.54 mm Span: in (13.33 mm) in Width: in (13.97 mm) 3.96 mm Span: in (13.33 mm) in Width: in (12.70 mm) 3.96 mm Span: in (12.06 mm) in Width: in (11.43 mm) 3.96 mm Span: in (10.79 mm) Building a Pitch: 0.100in (2.54mm) Part #- XX - P - 00YYY XX OOYYY Building a Pitch: 0.156in (3.96mm) Part #- XX - P - 00YYY XX OOYYY XX= No. of conductors (see table at right for conductor count availability) YYY = (ft.): 100, 500 TC= Tinned TTC = Tinned Topcoated Width: XX *.100 in Span: XX*.100 in Width: XX *.156 in Span: XX*.156 in , 23244, 23245, 20008, 23261, 23236, 20028, 20027, 20026, 20029, 23198, Insulation: PVC Propagation Delay Nanoseconds/ft (ns/m): 1.35 (4.42) Conductor (XX) Count Options: 04, 06, 08, 10, 12, 14, Conductor (XX) Count Options: 05, 06, 07, 08, 10, Conductor (XX) Count Options: 03, 04, 09, Conductor (XX) Count Options: 03, 04, 09, Conductor (XX) Count Options: 04, 05, Conductor (XX) Count Options: 02, 03, 04, 06, 07, 08, 15, Conductor (XX) Count Options: 03, 04, 05, 06, 10, 11, 12, 14, 16, Conductor (XX) Count Options: 10, Conductor (XX) Count Options: 03, 04, 07, 10, 14, Conductor (XX) Count Options: 06, 08, 10, 16, 20, Conductor (XX) Count Options: 10, 12, 15, 18, Conductor (XX) Count Options: 07, 10, PVC Stranded Wide Pitch Ribbon

13 HIELDED Shielded and Jacketed Flat Ribbon UL Listing: 2912 UL Temp: 105 C UL Voltage Rating: 150V Shielded flat ribbon cable for EMI/RFI/ESD considerations Two drain wires for insured grounding Cable core features our popular inch (1.27mm) pitch ribbon cable for ease of termination with most IDC connectors Choose from a wide selection of conductor counts APPLICATIONS Ideal for environments where EMI/RFI/ESD may be an issue PHYSICAL CONSTRUCTION DESCRIPTION Using HCA (page 9) for the core of this shielded cable, two 28 AWG (7/36 TC) drain wires are pulled in separate to ensure contact with the Aluminum/Polyester tape (AL side in). The core is jacketed in Black PVC* XX - P - 00YYY Conductor AWG: 28 7/36 AWG TC Insulation: PVC Shield Construction Drain / Tape Shield: AL/PET Conductor Resistance ohms/1000 ft (ohms/km): 67.5 (221.4) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 20 (58) Impedance (G-S-G): 70 ohms Example P Example P Building a XX - P - 00YYY XX 00YYY XX= No. of conductors: 14, 15, 16, 20, 25, 26, 34 YYY = (ft.): 660 Width: in (8.89 mm) Span: in (8.25 mm) Width: in (21.59 mm) Span: in (20.95 mm) Width: XX *.050 in Span: XX*.050 in *Standard jacket color is Black. Other colors are available upon request. Other conductor counts and put-ups available upon request. Shielded and Jacketed Flat Ribbon 13

14 ROCESS Flat Cable Manufacturing Process M The Process Flat ribbon cable requires more than sophisticated tooling, high quality plastics, and the latest extrusion equipment. It also requires a variety of measurement devices to help us verify tightly-controlled ribbon dimensions and plastic thicknesses to meet the UL voltage requirements. Non-contact laser measurement of ribbon dimensions provides production operators and feedback systems with results hundreds of times per second. Also, as part of in-line testing procedure, we continuously apply high voltage to the cable during manufacturing. This process allows us to better monitor the quality of the cable produced and ensure proper quality control. Quality personnel look at the structure of the ribbon cable s plastic web to ensure that wires can be separated by the customer. Our visual inspection system can detail the structure of the entire cross-section of a wide ribbon cable, allowing inspectors to see the product at great magnification where necessary. The Hitachi Difference With trained operators, the right equipment and sophisticated quality support, you can rest assured that Hitachi Cable will meet and exceed your flat cable needs. 14 Flat Cable Manufacturing Process

15 MQT QT Summary Sheet PVC UL/cUL Listing: TPO UL/cUL Listing: PVC UL/cUL Voltage: 150V TPO UL/cUL Voltage: 150V PVC UL/cUL Temp: 105 C TPO UL/cUL Temp: 90 C PVC UL/cUL Flame Rating: VW-1 TPO UL/cUL Flame Rating: Call Heat bonded construction providing tight pitch control Contoured flat sections for ease of IDC termination Non-laminated versions allow for bundling to reduce resistance to air flow Stranded construction for greater flexibility and flex life Solid copper constructions also available Suitable for SE, MSE, LVD and MLVD applications Ask about our products SCSI NEXZ designed for Ultra 320 REACH and RoHS 2 compliant HCA Short Description HCA Series No. Bond Length inch (mm) Conductor AWG Stranding Coating Insulation Span of Flat to Flat Inch (mm) Ground-Signal (G-S) pf/ft (pf/m) Diff. Capacitance Impedance Propagation Delay Ground-Signal (G-S-G) pf/ft (pf/m) SE (G-S-G) (Ohms) SE - Single End (G-S) (Ohms) Diff. Nanoseconds/ft (ns/m) Max. Skew ns/ft (ns/m) Page MQT TPO MQT TPO DLMQT (40) (250) 14.9 (48.88) 18.9 (62.00) (5.12) 35 (114.8) 16 7/38 PVC (40) TC 4.92 (125) 14.6 (47.89) 19.2 (62.99) (4.99) 35 (114.8) (10) (250) 10.3 (33.79) 13.3 (43.63) (5.12) 35 (114.8) 17 7/38 TPO (40) TC 4.92 (125) 10.8 (35.43) 14.8 (48.55) (5.12) 35 (114.8) (40) (250) 10.4 (34.12) 14.0 (45.93) (5.12) 35 (114.8) 17 7/38 TPO (50) TC 5.24 (133) 11.0 (34.12) 15.0 (49.21) (5.12) 35 (114.8) 17 Note 1: MQT is Micro Quick-Twist cable that is a twisted pair cable with bonded sections on inch (0.635 mm) pitch with no lamination tape. Note 2: A span is the combination of one bonded section and one twisted section. Note 3: HCA offers custom span cables with either 40 or 50mm bonded sections with up to a maximum of 7 different lengths of twisted pair sections before the pattern repeats. Note 4: Other fixed spans available. MQT Summary 15

16 QT Micro Quick-Twist PVC Stranded inch (0.635 mm) M UL/cUL Listing: UL/cUL Temp: 105 C UL/cUL Voltage: 150V UL/cUL Flame Rating: VW-1 Pitch tolerance.002 inches (.050 mm) Reduced noise and crosstalk Ideal for IDC termination with high-density connectors Great alternative to fully extruded FEP and TPO ribbon cable APPLICATIONS SCSI, Fast-XX, SPI-2 and SPI PHYSICAL CONSTRUCTION DESCRIPTION HCA Micro Quick-Twist is built with 30 AWG stranded tinned copper. Each conductor is individually extruded with PVC. are pulled into pairs then bonded into flat sections for Insulation Displacement Connector (IDC) termination points. A Bonding Method requiring no lamination tape (NL) is used on the flat sections of and and the Dual Lamination Tape Bonding Method (DL) is used on and Pitch: in (0.635 mm) XX - P - 00YYY Conductor AWG: 30 7/38 AWG TC Insulation: PVC-NL Conductor Resistance ohms/1000 ft (ohms/km): 106 (347.68) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 14.9 (48.87) (G-S-G) pf/ft (pf/m): 18.9 (91.992) Impedance (G-S-G) SE - Single End: 91 ohms (G-S) Differential: 117 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.56 (5.116) Maximum Skew ns/ft (ns/m): (0.114) Example P ft m Example * - P ft m Building a XX - P - 00YYY XX 00YYY XX= No. of conductors: 26, 34, 50, 68, 80, 100 (100 = 11*) YYY = (ft.): 200 Width: in (16.51 mm) Span: in (15.87 mm) Width: 2.50 in (63.5 mm) Span: in (62.85 mm) Width: XX *.025 in Span: XX *.025 in Pitch: in (0.635 mm) P - 00YYY Conductor AWG: 30 7/38 AWG TC Insulation: PVC-NL Conductor Resistance ohms/1000 ft (ohms/km): 106 (347.6) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 14.6 (47.88) (G-S-G) pf/ft (pf/m): 19.2 (62.97) Impedance (G-S-G) SE - Single End: 82 ohms (G-S) Differential: 113 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.52 (4.98) Maximum Skew ns/ft (ns/m): (0.114) Example P ft m Building a XX - P - 00YYY XX 00YYY XX= No. of conductors: 96, other conductor counts available upon request YYY = (ft.): 200 *DL version available, part number XX-P-00YYY, XX-P-00YYY Width: in (43.18 mm) Span" in (42.54 mm) Width: XX *.025 in Span: XX *.025 in Other conductor counts and put-ups available upon request. Standard multicolor is Red, White, Blue, White, Blue, White, Blue, White, Blue, White, repeat. PVC - DL: Heat bonded PVC insulated wires with dual lamination tapes. PVC - NL: Heat Bonded PVC insulated wires with no lamination tapes. 16 Micro Quick-Twist PVC Stranded

17 QT Micro Quick-Twist TPO Stranded & Solid inch (0.635 mm) UL/cUL Listing: UL/cUL Temp: 90 C UL/cUL Voltage: 150V UL/cUL Flame Rating: VW Pitch tolerance.002 inches (.050 mm) Excellent noise and crosstalk reduction characteristics Ideal for IDC termination with high density connectors UL approved APPLICATIONS Internal hard drives, SCSI, SPI, SPI-2, SPI-3, SPI-4, and U1 and U2 servers U320 LVD and SE applications Compliant for SCSI Fast-XX, SPI-2, SPI-3 U160 LVD, SPI , 20051, 20188, 20187, 20095, 20089, 20096, Conductor Count: 68 : 200 (60.96 m) Conductor AWG: 30 7/38 AWG TC Insulation: TPO-NL Conductor Resistance ohms/1000 ft (ohms/km): 106 (347.6) PHYSICAL CONSTRUCTION DESCRIPTION HCA TPO Micro Quick-Twist is built with 30 AWG stranded or solid tinned copper. Each conductor is individually extruded with TPO. are pulled into pairs then bonded into flat sections for Insulation Displacement Connector (IDC) termination points. A Bonding Method requiring no lamination tape (NL) is used on the flat sections of and and the Dual Lamination Tape Bonding Method (DL) is used on 20089, , 20096, and Ground-Signal (G-S) pf/ft (pf/m) Capacitance Impedance Propagation Delay Ground-Signal (G-S-G) pf/ft (pf/m) (G-S-G) SE - Single End (G-S) Differential Nanoseconds/ft (ns/m) (ns/m) Maximum Skew ns/ft (ns/m) P (33.78) 13.0 (42.64) 95 ohms 120 ohms 1.56 (5.116) (0.114) P (35.78) 14.0 (45.92) 95 ohms 120 ohms 1.56 (5.116) (0.114) P (36.08) 16.5 (54.12) 86 ohms 125 ohms 1.45 (4.756) (0.082) P (36.08) 16.5 (54.12) 86 ohms 125 ohms 1.45 (4.756) (0.082) P (34.11) 14.0 (45.92) 88 ohms 120 ohms 1.56 (5.116) (0.082) P (32.8) 14.0 (45.92) 88 ohms 117 ohms 1.50 (4.92) (0.082) P (36.08) 15.0 (49.2) 86 ohms 115 ohms 1.56 (5.116) (0.114) P (36.08) 15.0 (49.2) 86 ohms 115 ohms 1.56 (5.116) (0.114) Width Span Width: in (43.18 mm) Span: in (42.54 mm) Width: in (43.18 mm) Span: in (42.54 mm) Width: in (43.18 mm) Span: in (42.54 mm) Width: in (43.18 mm) Span: in (42.54 mm) Width: in (43.18 mm) Span: in (42.54 mm) Width: in (43.18 mm) Span: in (42.54 mm) Width: in (43.18 mm) Span: in (42.54 mm) Width: in (43.18 mm) Span: in (42.54 mm) Standard multicolor is Red, Light Yellow, Blue, Light Yellow, Blue, Light Yellow, Blue, Light Yellow, Blue, Light Yellow, repeat for all stranded constructions. TPO - DL: Heat bonded TPO insulated wires with dual lamination tapes. TPO - NL: Heat Bonded TPO insulated wires with no lamination tapes. Micro Quick-Twist TPO Stranded 17

18 OUND Round to Flat Ribbon S UL/CSA Listing: (UL) CM c(ul) 105 C CSA Style: AWM llb, 300V, 105 C UL Style: 20381, 300V, 105 C Ref. OD PVC JACKET ALUMINUM / POLYESTER TAPE Available unshielded and double shielded W Shielded includes an aluminum tape and braid Cable core features our inch (1.27 mm) pitch gray ribbon cable for use with popular IDC connectors. Core is slit 1.50 inch (38.1 mm) then bonded 0.75 inch (19.05 mm) for ease of termination BRAID SHIELD APPLICATIONS Internal and external wiring of electronic equipment and consumer products PHYSICAL CONSTRUCTION DESCRIPTION Cable core consists of slit and bonded flat gray ribbon cable. Core is folded and twisted into a round format before being taped with either Polyester (23149) or Aluminum/Polyester (23122) tape (Al side out). For dual shielded versions, cable is then braided. The core is jacketed in Black PVC.* XX - P - 00YYY Conductor AWG: 28 7/36 AWG TC Insulation: PVC Shielding: Al/PET Tape & Braid Jacket: PVC Conductor Resistance ohms/1000 ft (ohms/km): 67.5 (221.4) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 24.5 (80.36) Impedance (G-S-G): 65 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.62 (5.31) Example P ft 201 m Example P ft 201 m Building a XX - P - 00YYY XX 00YYY XX= No. of conductors: 16, 20, 25, 26, 34, 37, 40, 50, 60 YYY = (ft.): 660 Width: in (10.16 mm) Span: in (9.52 mm) Width: in (38.10 mm) Span: in (37.46 mm) Width: XX *.050 in Span: XX*.050 in Jacket OD Inches mm XX - P - 00YYY Conductor AWG: 28 7/36 AWG TC Insulation: PVC Shielding: PET Tape Jacket: PVC Conductor Resistance ohms/1000 ft (ohms/km): 67.5 (221.4) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 24.5 (80.36) Impedance (G-S-G): 90 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.62 (5.31) Example P ft 201 m Example P ft 201 m Building a XX - P - 00YYY XX 00YYY XX= No. of conductors: 16, 20, 25, 26, 34, 37, 40, 50, 60 YYY = (ft.): Width: in (10.16 mm) Span: in (9.52 mm) Width: in (31.75 mm) Span: in (31.11 mm) Width: XX *.050 in Span: XX*.050 in Jacket OD Inches mm Other conductor counts and put-ups available upon request. This product is available in 30 AWG solid and stranded constructions. Please consult with factory for more information. *Standard jacket color is Black. Other colors are available by special request. 18 Round to Flat Ribbon

19 OLUTIONS Other Products by HCA HITACHI CABLE AMERICA INC. PREMISE & FIBER OPTIC CABLE CATALOG PREMISE & FIBER OPTIC CABLE CATALOG Premise & Fiber Optic Cable HCA has a long history of designing and manufacturing a complete line of high-performance copper and fiber optic communication cables including Category 6, 6A and 7 cables. Our dedication to engineering perfection is evident in the consistent quality and performance of all the cable products we manufacture. Cabling Solutions for Industrial Ethernet To accommodate a wide variety of applications, Hitachi Cable offers dozens of unique designs intended to meet your specific needs. From high-flex to static, solid conductor to stranded, high and low temperature, oil and chemical resistant, we have the right industrial Ethernet solution. Ultrasound. Medical. Inspection Interconnect Solutions Medical Cable Solutions Our medical core technologies include advanced material development, ultra-fine wire capability, MCX (Micro-Coaxial Cable) technology yields long flex-life with tight electrical parameter control (Micro twinax cable is also available), bundled cable with fine wire coaxials for customer specific designs and ultra-high density MCX cable designs deliver a soft, but robust, feel for customer applications. Coaxial & Mini-Coaxial Cable Hitachi Cable s coaxial cables are engineered with a wide selection of gauges and materials, with each offering the benefits for mechanical, electrical and cost consideration applications. Industrial applications include high power and environmentally rugged materials for use in robust applications. HCA Solutions 19

20 WORLDWIDE COVERAGE The Flat Cables in this catalog are designed and manufactured at our modern 300,000 square foot ( square meters) facility located in the East Industrial Park of Manchester, New Hampshire, USA. In addition to a full line of high performance Electronics Cables, Hitachi Cable manufactures a wide range of HCA Brand cables to meet the demands of diverse markets throughout the world. For complete information, please contact your local representative or our inside sales team at or Holt Avenue, East Industrial Park Manchester, New Hampshire USA Tel: Sales: Fax: /2016