Static Eliminator Blowers

Transcription

1 HDC-AC with built-in high-voltage power supply Replacable Emitter unit Straight louver panel static elimination features and static elimination area Straight louver panel Static elimination time (sec) Static elimination features 18 Maximum air speed 1 Minimum air speed Measurement distance (mm) 1 Air 1 Maximum airflow (mm) Static elimination time sec INDICATOR (GREEN) RUN INDICATOR (GREEN) AIR CTROLER FAN SPEED INDICATOR Wide-angle louver panel static elimination features and static elimination area Static elimination time (sec) Wide angle louver panel Static elimination features Maximum air speed Minimum air speed Measurement distance (mm) 1 CE label FAN LOCKED ALARM (RED) OVER CURRENCT INDICATOR (RED) PULSE DISCHARGE INDICATOR (RED) Air 1 Maximum airflow (mm) Static elimination time sec The BF-MA is a reliable HDC-AC static eliminator blower ionizer that has long-term and stable static elimination capabilities and generates less ozone density than existing products. It is slim and lightweight with the following features. Error recognition of electrical discharges and sparks The time between regular maintenance is longer and users can replace the emitter needle unit on their own. Two way application: Strong & long distance ionization with Straight louver panel or Wide direction ionization with Wide angle louver panel. Lock the angle adjustment. SPECIFICATI AC Adaptor INPUT: AC1 4V 5/Hz OUTPUT: 4V DC INPUT VOLTAGE 4 VDC 1% CAPACITY 1 VA OUTPUT VOLTAGE 7, V-p I BALANCE 1 1 V or less Decay Time 1 1 sec or less Alarm Output Normal: H.V Output abnormal or Fan abnormal Red LED : MOS FET Relay, Normally Close contact output Maximum current: A Apply voltage: VDC or less Air Flow 1.4. m/min Angle of air direction degree adjustable each 1 degree Ozone Density. ppm or less Center front at 15mm distance Indoor use, 4, 15 85%RH no condensation Main unit Dimensions mm W H D Appox 1. kg Material Main body: ABS, Emitter: Tungsten, Stand: SECC Accessories Operation Manual, AC Adaptor, Wide angle louver Alarm output cable, Cleaning Brush 1 1

2 Principle of Static Elimination The air ionizers are designed to eliminate static in a wide range of industries, providing solutions to issues such as ESD problems in the electronics industry and problems caused by static electricity in the plastic film manufacturing industry. The use of a fan enables the ionizer to eliminate static over a wide area, even from objects that are located some distance away. A wide selection is offered, with a choice of high frequency, AC, or DC models for desktop or production line use to suit various application needs. Front Panel louver Ions Emitter needle Grounding electrode Fan Charged object covering Knob Bolt Fixing bracket INPUT DC4V CAP.1VA 1:ALARM :GND V 5 4 :DC 4:ALARM 5:NOT USE 1 :DC+4V MADE IN JAPAN AIR IIZER BF-MA Main Power Switch - diameter mm Static eliminator blower The power and signal output BF-MA Power indicator (green) controller Fan speed indicator [5 levels] (green) (green) Replacable Emitter unit HDC-AC with built-in high-voltage power supply Static Elimination Blowers A fan is used to transport the ions Fan lock alarm (red) Pulse discharge indicator (red) Over current indicator (red) Options Emitter needle unit (optional) s: package of 1 (optional) Light turns on when an abnormal high voltage and fan stoppage is detected. 7 5 covering Knob Bolt AIR IIZE R WINS TAT Possible to continuously adjust the airflow with the fan adjustor. Power Switch 5 Front Panel louver POWE R R UN FAN ADJ. P.D. O.C. FAN LOC K B F--MA Louver and emitter needle easy to remove and replace The BF-MA is an ionizer that is small and lightweight with a mounted HDC-AC static eliminator blower for stronger emitter needle abrasion resistance as well as stable and long-term static elimination capabilities. Compared to existing high frequency AC types it is has less deterioration with age meaning the duration between maintenance periods is longer. INPUT DC 4V C AP.VA 1:ALARM Generates less ozone density than existing products. Fixing bracket :GND :DC V 4:ALARM 5:NOT USE :DC+4V MADE IN J APAN FAN S PE E D The power and signal output - diameter mm Ground terminal Meets RoHS standards. BF-MA 1 Air 1 Static elimination time sec Maximum airflow 1- (mm) Electric consumption Air speed Output signal Noise Accompanying items Optional parts BF-MA 4 VDC with AC 1~4V ACadaptor VA ±7 V-p ±1V or less when shipped from the factory.7 to 1. m/min 1.1 to 1.7 m/sec distance mm; centered.5 ppm or less distance 15 mm 1 to 4 / 15 to 85% RH no condensation No voltage contact output normal close with high-voltage output or fan abnormalities 15 5 mm W H D not including projecting portion Approx. 84 g including stand 48 db A distance 1 m Operation manual, AC adapter, ground wire, signal output cable, cleaning brush Emitter needle unit, filters package of 1 1

3 HDC-AC with built-in high-voltage power supply Static eliminator blower BF-OHPA Replacable Emitter unit INDICATOR HIGH VOLTAE INDICATOR HIGH VOLTAGE ALARM AIR CTROLER FAN ALARM INDICATOR BUZZER This is the overhead air ionizer with SSD new technology "HDC-AC". Alarm function for high voltage abnormal and fan locked with out put signal and the buzzer. It is available to connect in serial up to five units with optional cable "SIRCBL-OHPA" ALARM OUTPUT FUSE 1A INPUT 1-4V 5/Hz 5A MAX.5 FUSE HOLDER Air Flow Controler AIR IIZER BF-OHPA covering H.V FAN ALARM H.V ALARM Power Switch Power Inlet The power and signal output LEFT LOW MIDDLE RIGHT BUZZER 4- diameter 5.5mm UNFUSED OUTPUT 1-4V 5/Hz OUTPUT 5A MAX HIGH BUZZER SWITCH Power Outlet 4- diameter 1mm Front Panel louver Charged voltage (V) mm mm 9mm 75 Static decay time (sec) Ion Balance Indications BF-OHPA AC Inlet 1 to 4 VAC 5/ Hz Maximum.4 A ±7 V-p ±1 V or less to. m/min Power indication / High voltage indication / High voltage abnormal indication / Fan locked abnormal indication.5 ppm or less at 15 mm front 1 to 4 / 15 to 85% RH no condensation AC Power outlet Maximum load capacity: 5 A without fuse Available number of serial connection Up to five units Output Alarm signal Non-voltage contact out put Normally opened Alarm with High voltage output or fan locked mm W H D 55g Accessories Manual / Power cable / cleaning brush Optional part Serial connecting cable #SIRCBL-OHPA / Discharge emitter unit / 5 pieces as one packed

4 HDC-AC with built-in high-voltage power supply and High frequency type Static Elimination Blowers High frequency type Static eliminator blower BF-ZC High-voltage power supply indicator lamp (green) Auto cleaning brush button Abnormality indicator lamp (red) indicator lamp Auto cleaning brush button Cleaning brush start button When an ionizer is used continuously, the area around the emitter needles that are generating ions becomes dirty, causing a drop in the effectiveness of the static elimination process. In order to maintain effective static elimination, periodic cleaning of the emitter needles is essential. Shishido Electrostatic developed a proprietary automatic emitter needle cleaning function to solve this troublesome problem. 18 Front louver 11 9 cally perform periodic cleaning of the emitter needles once every 4 hours An automatic emitter needle cleaning function is built in to automati- confirmation at any time of the correct balance between the positive and negative ions, as well as dramatically improved efficiency in maintenance and static elimination. AIR IIZER The BF-ZC features a built-in ion balance indicator to enable BF-ZC I BALANCE TERMINAL WIRING DIAGRAM: SUPPLY +4V DC + ALARM OUT 1 HV AUTO ALAM 1 AUTO Knob bolt MANUAL PUSH High-voltage power supply indicator lamp (green) Auto cleaning brush button Auto cleaning brush indicator lamp adjustment knob indicator lamp Abnormality indicator lamp (red) Cleaning brush start button Terminal block -M mounting hole Power supply input jack Charged voltage (V) 1 mm mm 9mm Static decay time (sec) Alarm function BF-ZC 4 VDC AC adapter supplied ; compatible with 1 to 4 VAC Normal operation : 1 VA While brush cleaning : 17.5 VA. kvac ±5 V. m/min. ppm or less 1 to 4 / 15 to 5% RH no condensation Prefilter level mm W H D 18 g 59 db A LED indication when high-voltage output stops 15

5 High frequency type Static eliminator blower BF-SZA Fan abnormality indicator lamp (orange) Power supply indicator lamp (green) An AC adapter is not provided with the BF-SZA model. Please purchase the dedicated AC adapter (OBF-4V-A) to enable connection to an AC power source. Please purchase the dedicated serial connection cable as meter (OBF-SZA-CBL) for connecting BF-SZA serially. High-voltage output abnormality indicator lamp (red) ALARM FAN H.V. adjustment switch 7 Front louver Finger guard 81 H FAN AIRIIZER 18 BF SZA Up to eight units can be connected serially. However, only three units can be connected when the AC adapter is used. A louver that is simple to attach or detach has been adopted to facilitate product maintenance. 1 Charged voltage (V) L 1mm mm mm & SIGNAL OUTPUT Alarm functions INPUT BF-SZA 4 VDC 8 VA. kvac ±1 V or less.7 m/min.1 ppm or less 1 to 4 / 15 to 5% RH no condensation 7 81 mm W H D 8 g db A LED indication and signal output when the fan, high-voltage output or power supply stops Static decay time (sec) Static eliminator blower -M mounting holes Power supply input and signal output connectors BF-ZB Fan abnormality/stopped indicator lamp (red) High-voltage abnormality indicator lamp (red) Power supply indicator lamp (green) /SIGNAL FAN AIR IIZER Hi Mid BF ZB Lo A 55 9 Ground terminal Power supply and signal connectors adjustment switch Up to six units can be connected serially. However, only two units can be connected when the AC adapter is used. Charged voltage (V) 1 mm mm 4mm B Static decay time (sec) Alarm functions -φ fixing holes BF-ZB 4 VDC AC adapter supplied; compatible with 1 to 4 VAC 1 VA. kvac ±1 V or less 1. m/min.5 ppm or less 1 to 4 / 15 to 5% RH no condensation Prefilter level 9 mm W H D 8 g 48 db A LED indication and signal output when the fan, high-voltage output or power supply stops

6 .The self-adjusting function ensures an ideal balance between the positive and negative ions..the compact fan-type models are ideal for incorporation into systems and for use in production lines where space is limited. BF-SZA, BF-ZB The BF-SZA model is also suitable for spot ionizing at locations where an airflow cannot be used. 4.The built-in alarm is activated signal output provided when high-voltage output stops, or when the fan stops. The airflow can be selected in two steps. Serial connection enables multiple devices to be connected in a series within the system. BF-SZA, BF-ZB Static eliminator blower BF-XZA High frequency type Static Elimination Blowers 1.The high-frequency corona discharge method used generates a good balance of positive and negative ions with minimal secular change for highly effective static elimination. These ionizers are also easy to service and maintain. all the vertical models in the range Replacable Emitter unit (power indicator) ALARM (alarm indicator) C.C (cleaning check indicator) H.V ALARM (high voltage indicator) FAN ADJUSTER H.V FAN ADJ. C.C ALARM Front Panel louver 8 5 covering Wide angle louver panel Knob Bolt Straight louver panel AIR IIZER Thin and lightweight high-frequency corona discharge method fan-type ionizer. Louver and emitter needle easy to remove and replace. Signal output and LED announce when there is dust or abrasions on the emitter needle. Can choose the area for static elimination with two types of louvers. Main unit angle can be adjusted and locked and the angle never changes due to vibrations. Meets RoHS standards. 1 Air 1 Static elimination time sec Maximum airflow 1- (mm) Electric consumption Air speed Output signal Noise Accompanying items Optional parts Fixing bracket INPUT DC4V CAP.1VA 1:ALARM-NC :GND :DC V 5 4 4:ALARM-NO 5:C :DC+4V BF-XZA 15 MADE IN JAPAN - diameter mm The power and signal output BF-XZA DC4 V with AC1 to 4 V AC adapter 1 VA AC, V ±1 V or less distance mm; when shipped from the factory to. m/min 1.8 to.1 m/sec straight louver, distance mm; centered.5 to.m/sec wide-angle louver, distance mm; centered.4 ppm or less distance 15 mm 1 to 4 / 15 to 5% RH no condensation MOS FET relay no voltage contact output Abnormal high voltage ALARM, cleaning check C.C mm W H D not including protruding portion Approx. 79 g including stand 5 db A distance 1m Operation manual, AC adapter, wide-angle louver, ground wire, signal output cable, cleaning brush Emitter needle unit, filters package of 1 17

7 AC System Static eliminator blower BF-8/1/1 BF-8 The capacitive coupling system used in the emitter section generates a good balance of positive and negative ions with minimal secular change for highly effective static elimination Multiple fan motors are provided, the airflow is continuously variable, AIR IIZER BF-8 LOW HIGH and the airflow direction can be adjusted vertically. (all models) The horizontal configuration of these models enables the elimination BF-1 of static over a wide-ranging area, which makes them ideal for use in various applications including desktop and line use. (all models) 1 1 The self-adjusting function ensures an ideal balance between the AIR IIZER BF-1 positive and negative ions. (An ion balancer is built) LOW HIGH adjustment knob BF-1 Ground terminal AIR IIZER BF-1 LOW HIGH adjustment knob The mounting brackets are not included for BF-1 and BF-1. Charged voltage V mm mm 9mm Static decay time sec including stand BF-8 BF-1 BF-1 1 to 1/ to 4 VAC 5/ Hz, switch-selectable 5 VA 7 VA 9 VA kvac ± V or less 8.8 m/min 1. m/min 17. m/min.1 ppm or less 1 to 4 / 15 to 5% RH no condensation Pre-filter level option mm W H D mm W H D mm W H D 85 g 1 g 1 g 5 db A

8 AC System and DC System Static Elimination Blowers DC System Static eliminator blower BF-DD The BF-DD is a compact, lightweight DC air ionizer that can be incorporated into machinery or installed on a desktop or on a production line. It uses a fan to eliminate static from the distant charged object by sending air that includes positive and negative ions towards the target object. Finger guard Reasonable pricing and easy installation. Knob bolt positive and negative ions for highly effective static elimination. The device is also easy to service and maintain. The standard cleaning interval for the emitter needles is 5 hours (approximately six months if the device is operated continuously day and night), thereby enabling easy maintenance. 18 The DC corona discharge method used generates a good balance of AIR IIZER BF-DD adjustment knob Ground terminal 75 -φ fixing hole Power supply input jack Charged voltage V 1 mm mm 9mm Static decay time sec BF-DD 4 VDC AC adapter supplied; compatible with 1 to 4 VAC 15 VA 7.5 kvdc ± V or less. m/min MAX.7 ppm or less 1 to 4 / 15 to 5% RH no condensation Pre-filter level mm W H D 1 g 57 db A 19