Multilayer Chip Ferrite Bead FCZM Series
|
|
- Jasmine Simon
- 5 years ago
- Views:
Transcription
1 Multilayer Chip Ferrite Bead FCM Series Operating Temp. : -55 ~+125 STOAGE TEMP. ANGE : -1 ~ SCOPE This specification applies to the FCM series Ferrite Chip EMI suppressors. 2. STANDAD ATMOSPHEIC CONDITIONS Unless otherwise specified the standard range of atmospheric conditions for making measurements and tests is as follows: Ambient temperature : 2±15 elative humidity : 3~7% If there may be any doubt on the results, measurements shall be made within the following limits : Ambient temperature : 25±5 elative humidity : 3~7% PODUCT IDENTIFICATION FCM 168 U T F FCM 1 Type Chip Ferrite Bead For Large Current 4 Nominal Impedance Example Nominal Value 3Ω Ω 12 Ω 2External Dimensions (L W) (mm) 63[21] [42] [63] [85] [126] [186] T 6 Packing Tape & eel 3Material Code D, E, U 5 ated Current 1 1.A A 6.6A 7 Hazardous Substance Free Products F SHAPE AND DIMENSIONS Unit: mm [inch] Type L W T a FCM63 [21].6±.5 [.24±.2].3±.5 [.12±.2].3±.5 [.12±.2].15±.5 [.6±.2] FCM5 [42] 1.±.15 [.39±.6].5±.15 [.2±.6].5±.15 [.2±.6].25±.1 [.1±.4] FCM168 [63] 1.6±.15 [.63±.6].8±.15 [.31±.6].8±.15 [.31±.6].3±.2 [.12±.8] FCM212 [85] 2. (+.3, -.1) [ ( 12,-.4)] 1.25±.2 [.49±.8] [.33±.8].5±.3 [.2±.12] FCM3216 [126] FCM4516 [186] 3.2±.2 [.126±.8] 4.5±.2 [.178±.8] 1.6±.2 [.63±.8] 1.6±.2 [.63±.8] [.33±.8].5±.3 1.1±.2 [.2±.12] [.43±.8] 1.6±.2 [.63±.8].5±.3 [.2±.12]
2 SPECIFICATIONS FCM63 TYPE Part Number Impedance Test Max.DC esistance Max.ated Current Thickness FCM63D6-5TF 6±25%.18 5 FCM63D8-5TF 8±25%.2 5 FCM63D121-45TF 12±25% FCM63D241-35TF 24±25% FCM63D61-25TF 6±25% FCM63D12-2TF ±25% 1.4 FCM5 TYPE Part Number Impedanc e Test.3±.5 [.12±.2] Max.DC esistance Max.ated Current Thickness FCM5D-1TF ~3.5 FCM5E-18TF ~ FCM5E7-8TF 7±25%.1 8 FCM5E121-7TF 12±25%.13 7 FCM5E221-6TF 22±25%.18 6 FCM5E61-45TF 6±25% FCM5U7-12TF 7±25%.1 1 FCM5U121-1TF 12±25%.12 FCM5U221-8TF 22±25%.18 8 FCM5U61-45TF 6±25% FCM168 TYPE Part Number Impedanc e Test.5±.15 [.2±.6] Max. DC esistance Max. ated Current Thickness FCM168D-3TF 3±25%.3 FCM168D6-2TF 6±25%.8 FCM168D75-1TF 75±25%.15 FCM168D121-1TF 12±25%.2 FCM168D221-1TF 22±25%.2 FCM168D61-5TF 6±25%.35 5 FCM168E6-14TF 6±25%.1 14 FCM168U-3TF ~15.2 FCM168U-3TF 3±25%.3 FCM168U6-25TF 6±25%.4 25 FCM168U121-2TF 12±25%.5 FCM168U221-14TF 22±25%.1 14 FCM168U331-12TF 33±25%.14 1 FCM168U391-1TF 39±25%.14 FCM168U471-1TF 47±25%.2 FCM212 TYPE Part Number Impedance Test.8±.15 [.31±.6] Max. DC esistance Max. ated Current Thickness FCM212D39-4TF 39±25%.2 4 FCM212D8-3TF 8±25%.4 FCM212D121-25TF 12±25%.6 25 [.33±.8]
3 SPECIFICATIONS FCM212 TYPE Part Number Impedance Test Max. DC esistance Max. ated Current Thickness FCM212D221-15TF 22±25%.8 15 FCM212D31-15TF ±25% FCM212D471-8TF 47±25%.25 8 FCM212D61-8TF 6±25%.25 8 FCM212U-3TF 3±25%.2 FCM212U-4TF 3±25%.15 4 FCM212U6-3TF 6±25%.25 FCM212U121-25TF 12±25%.4 25 FCM212U221-2TF 22±25%.7 FCM212U31-15TF ±25%.1 15 FCM212U421-1TF 42±25%.2 FCM212U61-8TF 6±25%.25 8 FCM3216 TYPE Part Number Impedanc e Test [.33±.8] Max. DC esistance Max. ated Current Thickness FCM3216D19-6TF 19±25%.1 6 FCM3216D38-5TF 38±25%.15 5 FCM3216D6-4TF 6±25%.2 4 FCM3216D121-3TF 12±25%.3 FCM3216D51-2TF 5±25%.7 FCM3216D61-2TF 6±25%.7 FCM3216U-6TF 3±25%.1 6 FCM3216U6-4TF 6±25%.25 4 [.33±.8] FCM3216U121-3TF 12±25%.3 FCM3216U221-2TF 22±25%.8 FCM3216U31-2TF ±25%.1 FCM3216U391-2TF 39±25%.7 FCM3216U61-15TF 6±25%.1 15 FCM3216U12-5TF ±25%.3 5 Note: The thickness of FCM3216 series may be increased to 1.1±.2 mm when the Ir of product increased. FCM4516 TYPE Part Number Impedance Test Max. DC esistance Max. ated Current Thickness FCM4516U6-6TF 6±25%.1 6 FCM4516U72-6TF 72±25%.1 6 FCM4516U181-3TF 18±25%.25 FCM4516U471-2TF 47±25%.5 1.6±.2 [.63±.8] : Products with other electrical characteristics can be provided upon customer s request. Please contact your local sales.
4 Impedance( TYPICAL ELECTICAL CHAACTEISTICS D, E, U Material Comparison ated Current When operating temperatures exceed +85, derating of FCM168D121-1TF FCM168U121-2TF 1 1 (MHz) current is necessary for chip ferrite beads for which rated current is ma and over. Please apply the derating curve shown in chart according to the operating temperature. Derated Current[A] Operating Temperature[ ] FCM63 TYPE 18 FCM63D6-5TF 25 FCM63D8-5TF FCM63D121-45TF (MHz) 1 1 (MHz) 1 1 (MHz) 5 FCM63D241-35TF 1 FCM63D61-25TF 15 FCM63D12-2TF (MHz) 1 1 (MHz) 1 1 (MHz) FCM5 TYPE 2 FCM5D-1 TF 2 FCM5E-18TF 12 FCM5E7-8TF (MHz) 1 1 (MHz) 1 1 (MHz)
5 FCM5 TYPE FCM5E121-7TF FCM5E221-6TF FCM5E61-45TF FCM5U7-12TF FCM5U121-1TF FCM5U221-8TF (MHz) 1 1 (MHz) 1 1 (MHz) FCM5U61-45TF FCM168 TYPE FCM168D-3TF FCM168D6-2TF FCM168D75-1TF ( ) FCM168D121-1TF FCM168D221-1TF FCM168D61-5TF FCM168E6-14TF FCM168U-3TF FCM168U-3TF I d (Ω) 1 1 (MHz)
6 FCM168 TYPE FCM168U6-25TF FCM168U121-2TF FCM168U221-14TF 5 FCM168U331-12TF 5 FCM168U391-1TF FCM168U471-1TF (MHz) FCM212 TYPE 1 1 (MHz) FCM212D39-4TF FCM212D8-3TF FCM212D121-25TF FCM212D221-15TF FCM212D31-15TF FCM212D471-8TF FCM212D61-8TF 5 FCM212U-3TF 5 FCM212U-4TF Impedance( ) (MHz) 1 1 (MHz) FCM212U6-3TF 16 FCM212U121-25TF FCM212U221-2TF (MHz) 1 1 (MHz)
7 FCM212 TYPE FCM212U31-15TF FCM212U421-1TF FCM212U61-8TF FCM3216 TYPE 4 FCM3216D19-6TF FCM3216D38-5TF 8 12 FCM3216D6-4TF (MHz) 1 1 (MHz) 1 1 (MHz) 24 FCM3216D121-3TF 8 FCM3216D51-2TF 8 FCM3216D61-2TF Impedance( ) (MHz) 1 1 (MHz) 1 1 (MHz) FCM3216U-6TF 5 FCM3216U6-4TF FCM3216U121-3TF impedance(ω) (MHz) 1 1 (MHz) 1 1 (MHz) FCM3216U221-2TF FCM3216U31-2TF 5 FCM3216U391-2TF (MHz) 1 1 (MHz)
8 FCM3216 TYPE 8 FCM3216U61-15TF 1 FCM3216U12-5TF (MHz) FCM4516 TYPE 1 1 (MHz) FCM4516U6-6TF FCM4516U72-6TF FCM4516U181-3TF 6 FCM4516U471-2TF (MHz)
Multilayer Chip Ferrite Bead FCZM Series
Multilayer Chip Ferrite Bead FCM Series Operating Temp. : -55 ~+25 STOAGE TEMP. ANGE : - ~ +4. SCOPE This specification applies to the FCM series Ferrite Chip EMI suppressors. 2. STANDAD ATMOSPHEIC CONDITIONS
More informationExternal Dimensions (L W) (mm) 1005 [0402] [0603] [0805] Rated Current 1R5 1.5A 2R0 2.0A.
Multilayer Chip Ferrite Bead UP Series Operating Temp. : - ~+ FEATUES Internal silver printed layers and magnetic shielded structures to minimize crosstalk Monolithic structure for excellent reliability
More informationExternal Dimensions (L W) (mm) 1005 [0402] [0603] [0805] Rated Current 1R5 1.5A 2R0 2.0A.
Multilayer Chip Ferrite Bead UP Series Operating Temp. : - ~+ FEATUES Internal silver printed layers and magnetic shielded structures to minimize crosstalk Monolithic structure for excellent reliability
More informationExternal Dimensions (L W) (mm) 1005 [0402] [0603] [0805] Rated Current 1R5 1.5A 2R2 2.2A.
Multilayer Chip Ferrite Bead UP Series Operating Temp. : - ~+ FEATUES Internal silver printed layers and magnetic shielded structures to minimize crosstalk Monolithic structure for excellent reliability
More informationExternal Dimensions (L W) (mm) 1005 [0402] [0603] Feature Code. Packing Tape & Reel. Type L W T a GZ1005 [0402]
Multilayer Chip Ferrite Bead G-C Series Operating Temp. : -55 ~ +25 FEATUES Internal silver printed layers and magnetic shielded structures to minimize crosstalk Can be used in a wide range of frequency
More informationSMB P-SERIES FERRITE CHIP BEADS FOR HIGH CURRENT APPLICATIONS
SMB P-SEIES FEITE CHIP BEADS FO HIGH CUENT APPLICATIONS FEATUES Effective EMI Protection P-Series chip beads have a monolithic inorganic material construction that minimizes the effect of electromagnetic
More informationMulti-Layer Ferrite Chip Beads
Multi-Layer Ferrite Chip Beads ODEING CODE BF T T S PODUCT CODE BF : For General Signal Lines BP : For Power Lines BH : For High Speed Signal Lines (MHz~) BS : For Higher Speed Signal Lines (MHz~) DIMENSION
More informationOctober Chip beads. For power line. MPZ series. MPZ1608 Type. * Dimensions code JIS[EIA]
E M C C o m p o n e n t s October 26 Chip beads For power line MP series MP68 Type MP68 68[63 inch]* * Dimensions code JIS[EIA] (2/) eminders for using these products Before using these products, be sure
More informationMay Chip beads. For power line. MPZ series (for automotive) MPZ2012 type. * Dimensions code JIS[EIA]
E M C C o m p o n e n t s May 218 Chip beads For power line MP series (for automotive) MP212 212[85 inch]* * Dimensions code JIS[EIA] (2/1) EMINDES FO USING THESE PODUCTS Before using these products, be
More informationJuly Chip Beads. For power line. MPZ series. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s July 23 Chip Beads For power line MP series MP63 MP5 MP68 MP22 63[2 inch]* 5[42 inch] 68[63 inch] 22[85 inch] * Dimensions Code JIS[EIA] (2/23) EMINDES FO USING THESE PODUCTS
More informationJuly Chip beads. For general signal line. MMZ series (for automobiles) MMZ2012 Type. * Dimensions code JIS[EIA]
E M C C o m p o n e n t s July 216 Chip beads For general signal line MM series (for automobiles) MM212 Type MM212 212[85 inch]* * Dimensions code JIS[EIA] (2/11) eminders for using these products Before
More informationChip Beads(SMD) For Signal Line
(1/8) Chip Beads(SMD) For Signal Line Conformity to ohs Directive MM Series MM168 Type FEATUES Chip bead(impeder), MM series offers 7 construction materials. Size standardized for use by automatic assembly
More informationJuly Chip Beads. For signal line. HFxxACB series. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s July 203 Chip Beads For signal line HFxxACB series HFxxACB202 HFxxACB326 HFxxACB3225 HFxxACB4532 [0805 inch]* [206 inch] [2 inch] [82 inch] * Dimensions Code JIS[EIA] (2/7) EMINDES
More informationChip Bead UPB Series. Automotive. Part Numbering. Recommend Reflow Profile. AEC-Q200. RoHS Compliant Halogen Free REACH Compliant
AEC-Q2 ohs Compliant Halogen Free EACH Compliant Part Numbering UPB 155 T - 6 Y - AU Series Name Dimensions Code Impedance Packaging (mm) (Ω) Tolerance 155 1.x.5x.5 T Tape and eel 6 6 Y ±25% 1685 1.6x.8x.5
More informationJuly Chip beads. For general signal line. MMZ series (for automobiles) MMZ1005 Type. * Dimensions code JIS[EIA]
E M C C o m p o n e n t s July 26 Chip beads For general signal line MM series (for automobiles) MM5 Type MM5 5[42 inch]* * Dimensions code JIS[EIA] (2/) eminders for using these products Before using
More informationFair-Rite offers a broad selection of ferrite EMI suppression cable cores in several materials with guaranteed minimum impedance specifications.
Part Number: 2643801002 Frequency Range: Broadband Frequencies 25-300 MHz (43 material) Description: Application: Where Used: Part Type: Preferred Part: 43 ROUND CABLE CORE Suppression Components Cable
More informationMarch Chip beads. For general signal line Soft termination. KMZ-HR series (for automobiles) KMZ1608-HR type. * Dimensions code JIS[EIA]
E M C C o m p o n e n t s March 217 Chip beads For general signal line Soft termination KM-H series (for automobiles) KM168-H type KM168-H 168[63 inch]* * Dimensions code JIS[EIA] (2/11) EMINDES FO USING
More informationJuly Chip beads. For general signal line. MMZ series. MMZ1608 Type. * Dimensions code JIS[EIA]
E M C C o m p o n e n t s July 26 Chip beads For general signal line MM series MM68 Type MM68 68[63 inch]* * Dimensions code JIS[EIA] (2/4) eminders for using these products Before using these products,
More informationMultilayer Chip Bead CBM0805. Multilayer Chip Bead. Features. Applications. Constructions
Multilayer Chip Bead Features Effective EMI protection Low DC resistance High soldering heat resistance Multiple size availability RoHS compliant Applications Computers and Peripheral Equipment VCRS, Television
More informationJuly Chip Beads. For signal line. MMZ series. 0402[01005 inch]* * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s July 23 Chip Beads For signal line MM series MM42 MM63 MM5 MM68 MM22 42[5 inch]* 63[2 inch] 5[42 inch] 68[63 inch] 22[85 inch] * Dimensions Code JIS[EIA] (2/33) EMINDES FO USING
More informationFERRITE CHIP BEAD/MLB
5 FEITE CHIP BEAD/MLB Ferrite Chip Bead, normal type Feature MLB (Normal type) generates an impedance from the relatively lower to high frequency. Effective in noise suppression in the wide frequency range
More informationMay Chip beads. For power line GHz noise countermeasure. MPZ-E series. MPZ1005-E type. * Dimensions code JIS[EIA]
E M C C o m p o n e n t s May 28 Chip beads For power line GHz noise countermeasure MP-E series MP5-E type MP5-E 5[42 inch]* * Dimensions code JIS[EIA] (2/) EMINDES FO USING THESE PODUCTS Before using
More informationMay Chip beads. For general signal line. MMZ series. MMZ0603 type. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s May 218 Chip beads For general signal line MM series MM63 type MM63 63[21 inch]* * Dimensions Code JIS[EIA] (2/11) EMINDES FO USING THESE PODUCTS Before using these products,
More informationINPAQ. Specification. MCB 1005 B Series. Product Name Chip Ferrite Bead Series MCB B Series Size EIAJ Global RF/Component Solutions
MCB 1005 B Series Specification Product Name Chip Ferrite Bead Series MCB B Series Size EIAJ 1005 RoHS Pb Chip Ferrite Bead (MCB-B Series) Engineering Spec. This product belongs to the industrial grade
More informationAugust Chip beads. For general signal line. MMZ series. MMZ0402 type. 0402[01005 inch]* * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s August 27 Chip beads For general signal line MM series MM42 type MM42 42[5 inch]* * Dimensions Code JIS[EIA] (2/) EMINDES FO USING THESE PODUCTS Before using these products, be
More informationMMZ-E series. Chip Beads. For general signal line GHz noise countermeasure (general signal line, high-speed signal line) July 2014
E M C C o m p o n e n t s July 214 Chip Beads For general signal line GHz noise countermeasure (general signal line, high-speed signal line) MM-E series MM63-E MM15-E 63[21 inch]* 15[42 inch] * Dimensions
More informationChip Beads & Inductors
Chip Beads & Inductors Introduction Chip Components Guide SAMWHA s CB, CBA,CM, CD series of chip components consist of compact, high performance beads and inductors. Their innovative components and case
More informationJuly Chip Beads. For signal line. MMZ-E series. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s July 213 Chip Beads For signal line MM-E series MM63-E MM15-E 63[21 inch]* 15[42 inch] * Dimensions Code JIS[EIA] (2/13) EMINDES FO USING THESE PODUCTS Before using these products,
More informationFebruary Chip Beads. For general signal line. MMZ Series. MMZ0603 Type. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s February 215 Chip Beads For general signal line MM Series MM63 Type MM63 63[21 inch]* * Dimensions Code JIS[EIA] (2/11) EMINDES FO USING THESE PODUCTS Before using these products,
More informationHigh Frequency 50 GHz Thin Film Chip Resistor
High Frequency 50 GHz Thin Film Chip esistor DESIGN SUPPOT TOOLS Models Available click logo to get started Those miniaturized components are designed in such a way that their internal reactance is very
More informationPOWER WIRE WOUND CHIP RESISTORS
1. Applicable Scope: This standard specification is for use in consumer electronics, computers, telecommunications, control instruments...etc. 2. Part Number: It is composed by Type, Rated Wattage, Nominal
More informationFebruary Chip Beads. For general signal line. MMZ series. 0402[01005 inch]* * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s February 24 Chip Beads For general signal line MM series MM42 MM63 MM5 MM68 MM22 42[5 inch]* 63[2 inch] 5[42 inch] 68[63 inch] 22[85 inch] * Dimensions Code JIS[EIA] (2/33) EMINDES
More informationMMZ1005-E Type. Chip beads. MMZ-E series. For general signal line GHz noise countermeasure (general signal line, high-speed line) July 2016
E M C C o m p o n e n t s July 216 Chip beads For general signal line GHz noise countermeasure (general signal line, high-speed line) MM-E series MM15-E Type MM15-E 15[42 inch]* * Dimensions code JIS[EIA]
More informationBalanced unbalanced transformation between antenna and cable (TV tuner) B W 21 S A01 T F. Structure Winding Type. Port Impedance.
Wire Wound Chip Balun Transformer BW-S Series Operating Temp. : -40 ~+85 FEATURES Winding type realizes small size and low profile Surface mount type Low insertion loss at frequency range Excellent solderability
More informationThick Film Chip Resistor CR Series (Wide Terminal Type)
Thick Film Chip Resistor CR Series (Wide Terminal Type) Application Electronics Navigation equipment Power supply etc. equipment. Indoor lighting, Central door locking, Features Small size and light weight
More informationMultilayer Ferrite Beads
ILBB-63 Multilayer Ferrite Beads MECHANICAL SPECIFICATIONS Solderability: 9 % coverage after 5 s dip in 235 C solder following 6 s preheat at 12 C to 15 C and type flux dip esistance to Solder Heat: 1
More informationINDEX. ISO-9002 Certified YAGEO CORPORATION
INDE 2 Multilayer Ferrite Chip Beads [ SB/PB/UP/NB/GB Series ] 22 Multilayer Ferrite Chip Beads [ BA Series ] 26 Surface Mount Beads [ FB Series ] 3 EMI PC Beads [ SBC Series ] 33 Data Line EMI Filter
More informationChip Bead PBY Series. Automotive. Part Numbering. Recommend Reflow Profile. AEC-Q200. RoHS Compliant Halogen Free REACH Compliant
AEC-Q2 ohs Compliant Halogen Free EACH Compliant Part Numbering PBY 155 T - 4 Y - AU Series Name Dimensions Code Impedance Packaging (mm) (Ω) Tolerance 633.6x.3x.3 T Tape and eel 4 4 Y ±25% 155 1.x.5x.5
More informationSize, Power Rating Code. T.C.R. Marking. ±50 10 Ð6 /ûc(ppm/ûc) No marking (2R) Marking (3R, 6R) ± Ð6 /ûc(ppm/ûc) No marking (2R)
Precision Chip esistors Precision Chip esistors :,, :,,,, :,,,,,, Features Small size and lightweight For PC size reduction and lightweight products High reliability Metal glaze thick film resistive element
More informationFrelTec GmbH. Current Sensing Chip Resistor SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 6/8/2015 1/13 Freltec GmbH www.freltec.com SPECIFICATION Part Number 017 05 * R001 * J * T05 ** D E Size Value Tolerance Packing TCR Power Rating 017
More informationChip Inductors (Chip Coils) O05E.pdf Apr.28,2017
Chip Inductors (Chip Coils) EU RoHS Compliant For r o ur - Because of the difference of measurement condition, electrical characteristics plots on this catalog may have some difference to official specification
More informationFair-Rite offers a broad selection of ferrite EMI suppression cable cores in several materials with guaranteed minimum impedance specifications.
Part Number: 2675023002 Frequency Range: Low Frequency 200 khz - 30 MHz (75 material) Description: Application: Where Used: Part Type: 75 SHIELD BEAD Suppression Components Cable Component Mechanical Specifications
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage SC type: NP0/X7R (Pb Free & RoHS compliant)
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage SC type: (Pb Free & RoHS compliant) 2.2 pf to 4.7 nf Product specification Mar 1, 2007 V. 0 Product specification 2 SCOPE This specification
More informationThick Film Chip Resistors Low Resistance ( for 0402 ) This specification applies for the RL04 ( 0402 ) of thick film chip resistors made by TA-I.
page 1 / 8 1. Scope : This specification applies for the RL04 ( 0402 ) of thick film chip resistors made by TA-I. 2. Construction: Over Coat Conductor : (Lead-free or with lead ) Sn Plating Ceramic Substrate
More informationFrelTec GmbH. Multilayer Ferrite Chip Inductor SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 5/27/2016 1/17 GmbH www.freltec.com SPECIFICATION Part Number 197 05 * 151 * S * J * E02 Type Size Value Material Toleranc e Packing 197 : SMD Multilayer
More informationFerrite beads...2 Parts number Legend...2 Competitor Cross...3 Reliability and Test Condition Derating Curve...5. Soldering...
Table of Contents The 15 to 186 series ranger of Miniature Ferrite beads contains the very latest in multi layer ferrite beads technology, thus providing the ultimate in performance demanded by today's
More informationEMC Components. RF Chokes High Current B82432-H. Data Book Supplement
EMC Components RF Chokes High Current B82432-H Data Book Supplement SIMID 03 (Siemens Miniature Inductors) Rated inductance 1,0 bis 330 µh Rated current 0,11 to 1,10 A Construction Size as per EIA standard:
More informationLow Ohmic Thick Film Chip Resistors
Low Ohmic Thick Film hip Resistors MR Series Features 1) Very-low ohmic resistance from 47m is in lineup by thick-film resistive element. 2) ROHM resistors have obtained ISO91 / ISO / TS16949 certification.
More informationThick Film Chip Resistors
Thick Film Chip Resisrs MCR Series < Not for Aumotive application > Features 1) Full line up from ultra small size (15) 2512 with jumper type. 2) ROHM resisrs have obtained ISO91/ISO/TS16949 certification.
More informationFair-Rite offers a broad selection of ferrite EMI suppression beads with guaranteed minimum impedance specifications.
Part Number: 2661000301 Frequency Range: Higher Frequencies 250-1000 MHz (61 material) Description: Application: Where Used: Part Type: Preferred Part: 61 SHIELD BEAD Suppression Components Board Component
More informationWIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES
HCI SERIES WIRE WOUND CHIP INDUCTORS HCI SERIES Introductions Product : HCI Miniature SMD Inductor For Power Line Size : 0805 The HCI series are low profile inductor used in notebooks, PC s, Cellular phone
More information(2) ELECTRICAL SPECIFICATIONS SEE TABLE 1
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD Coupled inductors for Warn : It is here not to use synchronous rectification curcuit! PODUCT INDENTIFICATION MSI - 200904CP - 050
More informationA S J ASJ PTE LTD LEAD FREE THIN FILM CHIP RESISTOR SPECIFICATION. Reference No. : SYS-ENG-209. Revision No. : D
ASJ PTE LTD LEAD FREE THIN FILM CHIP Reference No. : SYS-ENG-209 Revision No. : D DOC NO: SYS-ENG-209 PAGE: 2 of 24 1.0 SCOPE...... 3 2.0 PART NUMBERING SYSTEM...... 3 3.0 RATING....... 3 3.1 Rated Power......
More informationFrelTec GmbH. Current Sensing Chip Resistor SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 11/22/2016 1/10 Freltec GmbH www.freltec.com SPECIFICATION Part Number 018 05 * R001 * J * T05 ** E* Type Size Value Tolerance Packing Power Rating 018
More informationULTRA LOW POWER SMD METAL STRIP RESISTORS
Features These specification covers 2512 sized high power low resistance current sensing metal resistors. PART NUMBERING SYSTEM: - 2512 A 1W R005 F E C Type Dimensions Code 2512 Construction Resistance
More informationDesign Considerations
Design Considerations Ferrite beads provide a simple, economical method for attenuating high frequency noise or oscillations. By slipping a bead over a wire, a RF choke or suppressor is produced which
More informationThick Film Chip Resistors
Thick Film Chip Resisrs MCR Series < Not for Aumotive application > Features 1) Full line up from ultra small size (15) 2512 with jumper type. 2) ROHM resisrs have obtained ISO91/ISO/TS16949 certification.
More informationType CRG Series THICK FILM CHIP RESISTORS. Electrical Characteristics. Power rating: Key Features
Key Features Type CRG Series Thick Film Resistors with high power to size ratio, ideally suited to industrial and general purpose use Value range from Ω to MΩ Eight package sizes Terminal finish matte
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationSMD Resistor Networks
Product: Size: Thick Film Array Chip Resistor-SMRA Series 42x4 / 63x4 / 42x4(Concave) / 63x4(Concave) 42x8 official distributor of Thick Film Array Chip Resistor-SMRA Series 1. Scope -This specification
More informationThick Film Chip Resistor Arrays Thick Film Chip Resistor Networks (Lead-Free for CN Series Standard)
page number 1 /12 1. Scope : This specification applies for the CN series of thick film chip resistor arrays & chip resistor networks made by MQEC. 2. Construction, Dimensions, Schematic : 2.1 Construction
More informationSPECIFICATION FOR APPROVAL. 1/2W, 0603, Low Resistance Chip Resistor (Lead / Halogen free)
PAGE : 1 OF 7 1/2W, 0603, Low Resistance Chip Resistor (Lead / Halogen free) 1. Scope This specification applies to 0.8mm x 1.6mm size 1/2W, fixed metal film chip resistors rectangular type for use in
More informationMechanical Specifications. Part Type Information. Fair-Rite Product's Catalog Part Data Sheet, Printed:
Part Number: 2773021447 Frequency Range: Lower Frequencies < 50 MHz (73 material) Description: Application: Where Used: Part Type: Preferred Part: 73 SM BEAD Suppression Components Board Component Mechanical
More informationSMT Inductors SIMID 1812-T B82432-T. Data Sheet
SMT Inductors Data Sheet Size 1812 (EIA) or 4532 (IEC) Rated inductance 1,0 to 1000 µh Rated current 70 to 1300 ma Construction Upright ferrite drum core Laser-welded winding Flame-retardant encapsulation
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationChip Inductor INTRODUCTION FEATURE AND APPLICATION. Feature. Application
INTRODUCTION Multilayer Chip Inductor is an electronic part that uses in resonance circuit, for noise suppression and for impedance matching in the electrical circuit. SAMSUNG Electro-mechanics has 2 series
More informationLow Resistance Flat Chip Resistors Type SR73
Low Resistance Flat Chip Resistors Type SR73 1. Scope This specification applies to chip resistors (SR73) produced by KOA Corporation. CERTIFIED AHA 9/29/11 CERTIFIED 2. Type Designation The type designation
More informationThick Film Chip Resistors. ( Lead Free for RM series standard ) page 1/13
( Lead Free for RM series standard ) page 1/13 1. Scope : This specification applies for the RM series of thick film chip resistors made by. 2. Construction: Over Coat Conductor : (Lead-free or with lead
More informationRecommended Land Pattern: [mm]
Dimensions: [mm] 0,3 ±0,2 Recommended Land Pattern: [mm] W 0,7 0,7 Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 100 MHz Z 100 MHz 470 Ω ±25% Impedance @ 1 GHz Z 1 GHz 600
More informationContents. Introduction Page. 1.0 Scope Ratings & Dimension...4~ Structure Marking... 5~ Derating Curve...
Contents Introduction Page 1.0 Scope...4 2.0 Ratings & Dimension....4~5 3.0 Structure.....5 4.0 Marking..... 5~7 5.0 Derating Curve...7~8 6.0 Performance Specification...8~9 7.0 Explanation of Part No.
More informationSunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS
Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS Customer Product Name Wire Wound SMD Power Inductor Sunlord Part Number SWPA4020S T Customer Part Number [ New Released, Revised] SPEC No.:
More informationCHIP FERRITE BEADS ARRAY
CHIP FERRITE BEADS ARRAY Features 1. Availabe in a wide range of impedance values and providing excellent EMI suppression characteristics for various types of noise. 2. Line(3,4) is achievable with a single
More informationThick Film Chip Resistors
Thick Film Chip Resistors MCR Series < Automotive > Features 1) Full line up from ultra small size (15) to 2512 with jumper type. 2) High reliability metal glazed thick film. 3) ROHM resistors have obtained
More informationFair-Rite offers a broad selection of ferrite EMI suppression cable cores in several materials with guaranteed minimum impedance specifications.
Fair-Rite Product's Catalog Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Part Number: 2643102002 Frequency Range: Broadband Frequencies 25-300 MHz (43 material) Description:
More informationApplication. Features
Thick Film Chip Resistor CR Series Application Entertainment: Stereo, TV tuners, Tape recorder Appliance: Air conditioner, Refrigerator Computer & relative products: Main board, PDA Communication equipment:
More informationThick Film Chip Resistors
MCR6F Thick Film Chip Resistors MCR Series < Automotive > Features 1) Full line up from ultra small size (15) to 2512 with jumper type. 2) High reliability metal glazed thick film. 3) ROHM resistors have
More informationWire Wound Chip Inductors LPI0805FT Series
INTRODUCTION Product : LPI Miniature SMD Inductor For Power Line Size : 0805 The LPI series are low profile inductor used in notebook, PC, cellular phone backlight, inverter and etc. The devices are designed
More informationSMD - Resistors. Pulse Withstanding Thick Film Chip Resistor-SMDP Series. Product: Size: 0603/0805/1206/1210/2010/2512. official distributor of
Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: 0603///12// official distributor of 1. Scope Pulse Withstanding Thick Film Chip Resistor-SMDP Series -This specification applies to
More informationPRODUCT SPECIFICATION
PRODUCT SPECIFICATION Description: CRGH Series Product Type: (Resistance range: 1.0Ω ~ 10MΩ) CRGH0603_XXX (CRGH0603 1/5W +/- 1% & 5% Taped) CRGH0805_XXX (CRGH0805 1/3W +/- 1% & 5% Taped) CRGH1206_XXX (CRGH1206
More informationMICRO INDUCTORS. Features. Applications. Ordering Information. Shape and Dimensions MI - I J J T (1) (2) (3) (4) (5) (6) (7)
MICRO INDUCTORS Features 1. Very high Self-Resonant Frequencies 2. Ultra miniature size and light(0.6mm mm mm). No polarity 4. Terminal electrode has excellent solder heat resistance for soldering. 5.
More informationVI TELEFILTER Filter Specification TFS 246 H4 1/5
Filter Specification TFS 246 H4 1/5 Measurement condition Ambient temperature: 2 C Input power level: 0 dbm Terminating impedances *) Input: 490 Ω -2.62 pf Output: 490 Ω -2.62 pf External coil: 270 nh
More informationPRODUCT SPECIFICATION
PRODUCT SPECIFICATION Description: CRGH Series Product Type: (Resistance range: 1.0Ω ~ 10MΩ) CRGH0603_XXX (CRGH0603 1/5W +/- 1% & 5% Taped) CRGH0805_XXX (CRGH0805 1/3W +/- 1% & 5% Taped) CRGH1206_XXX (CRGH1206
More information(TRMA) Multilayer Ferrite Beads Chip Inductors. Token Electronics Industry Co., Ltd. Version: January 13, Web:
Version: January 13, 2017 (TRMA) Multilayer Ferrite Beads Chip Inductors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
More informationApril Inductors for Decoupling Circuits. Wound Ferrite. NLFV-EF Series. NLFV32-EF Type. * Dimensions Code JIS[EIA]
I N D U C T O R S April 2017 Inductors for Decoupling Circuits Wound Ferrite NLFV-EF Series NLFV32-EF 3225 [1210 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before using
More informationTfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit
Filter specification TFS 248 E 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances at f c *) Input: 560 Ω -5.9pF Characteristics Output: 500 Ω -6.3 pf Remark:
More informationSPECIFICATION FOR APPROVAL. 1/32W, Low Resistance Chip Resistor (Lead / Halogen free)
PAGE : 1 OF 7 1/32W, 01005 Low Resistance Chip Resistor (Lead / Halogen free) 1. Scope This specification applies 0.2mm x 0.4mm (01005) size 1/32W, fixed metal film chip resistors rectangular type for
More informationCOMMERCIAL ITEM DESCRIPTION SHIELDING BEADS, FERRITE, LEADED, EMI SUPPRESSOR
INCH-POUND A-A-55484 1 August 1994 COMMERCIAL ITEM DESCRIPTION SHIELDING BEADS, FERRITE, LEADED, EMI SUPPRESSOR The General Services Administration has authorized the use of this commercial item description
More informationFeatures and Applications of New Type Inductors
Features and Applications of New Type Inductors 2011.4 Contents 1 Main Product Categories 2 Development Roadmap 3 4 High Q Factor Multilayer Chip Ceramic Inductor Multilayer Chip Power Inductor Main Product
More informationSPECIFICATION FOR APPROVAL 1/8W 0816 LOW RESISTNACE CHIP RESISTOR
PAGE : 1 OF 11 1/8W 0816 LOW RESISTNACE CHIP RESISTOR 1. Scope This specification applies to 0.8mm x 1.60mm size 1/8W, fixed metal film chip resistors rectangular type for use in electronic equipment.
More informationVI TELEFILTER Filter specification TFS 915D 1/5
Filter specification TFS 915D 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The maximum attenuation
More informationApplication. Features. Medical equipments, Military equipments Converters Consumer products Communication devices Measurement instruments Printers
Thin Film Chip Resistor TR Series Application Medical equipments, Military equipments Converters Consumer products Communication devices Measurement instruments Printers Features Tight tolerance from ±1%,±5%
More informationSeptember Chip beads. For power line. MPZ series. MPZ0402 type. 0402[01005 inch]* * Dimensions code: JIS[EIA]
E M C C o m p o n e n t s September 2017 Chip beads For power line MPZ series MPZ0402 0402[01005 inch]* * Dimensions code: JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationVectron International Filter specification TFS 737 1/5
Vectron International Filter specification TFS 737 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The
More informationVectron International Filter specification TFS 121 1/5
Vectron International Filter specification TFS 121 1/ Measurement condition Ambient temperature: 23 Input power level: 0 dbm Terminating impedance: * Input: 130 Ω II 1,7 pf Output: 130 Ω II 1,7 pf Characteristics
More informationVI TELEFILTER Filter Specification TFS 211 C 1/5
Filename: tfs211c.doc version 3.0 23.01.2002 Filter Specification TFS 211 C 1/5 Measurement condition Ambient temperature: 20... 25 C Input power level: 5 ± 2 dbm terminating impedances * Input: 1,1 kω
More informationFeatures. Block Diagram
Features WATT SMT SINGLE SMT Technology 2:1 Input Range Efficiency up to 8 I/O Isolation 100 Short Circuit Protected MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC
More informationSeptember Inductors for Decoupling Circuits. Wound Ferrite. NLCV-EF Series. NLCV32-EF Type. * Dimensions Code JIS[EIA]
September 2016 Inductors for Decoupling Circuits Wound Ferrite NLCV-EF Series NLCV32-EF 3225 [1210 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationRecommended Land Pattern: [mm]
Dimensions: [mm] 0,5 ±0,3 2,0 ±0,2 Recommended Land Pattern: [mm] W 1,2 WIDE BAND / HIGH SPEED: W = 3,0 HIGH CURRENT: W = 4,0 1,0 Electrical Properties: Properties Test conditions Value Unit Tol. Impedance
More information