Multilayer Ferrite Beads

Transcription

1 ILBB-63 Multilayer Ferrite Beads MECHANICAL SPECIFICATIONS Solderability: 9 % coverage after 5 s dip in 235 C solder following 6 s preheat at 12 C to 15 C and type flux dip esistance to Solder Heat: 1 s in 26 C solder, after preheat and flux per above Terminal Strength:.3 kg (.66 lbs) minimum for 3 s Beam Strength:.3 kg (.66 lbs) minimum STANDAD ELECTICAL SPECIFICATIONS ± 25 % AT 1 MHz ( ) DC MA. ( ) ATED DC CUENT (ma) FEATUES High reliability Surface mountable Magnetically self shielded Nickel barrier plating virtually eliminates silver migration Material categorization: For definitions of compliance please see ENVIONMENTAL SPECIFICATIONS Operating Temperature: - 55 C to C Thermal Shock: 1 cycles, - 4 C to C Biased Humidity: 85 % H at 85 C, 1 h at full rated current DIMENSIONS in inches [millimeters] Dimensional Outline.63 ±.6 [1.6 ±.15] Ferrite Body.14 ±.6 [.36 ±.15] ecommended Pad Layout.31 [.8] PACKAGING OPTIONS.23 [.6].12 [2.6].32 ±.6 [.8 ±.15].32 ±.6 [.8 ±.15].39 [1.] Tape and eel: Embossed plastic carrier tape per EIA481-1, 4 pieces on a 7" [178 mm] reel DESCIPTION ILBB-63 3 ± 25 % E e3 MODEL IMPEDANCE VALUE IMPEDANCE TOLEANCE PACKAGE JEDEC (Pb)-FEE STANDAD PAT NUMBE I L B B 6 3 E 3 V PODUCT FAMILY SIE PACKAGE IMPEDANCE VALUE IMPEDANCE TOLEANCE evision: 16-Aug-12 1 Document Number: 3424 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PODUCTS DESCIBED HEEIN AND THIS DOCUMENT AE SUBJECT TO SPECIFIC DISCLAIMES, SET FOTH AT

2 ILBB-63 TAPE AND EEL SPECIFICATIONS 63 SIE PE EIA in inches [millimeters] P P 2 ØD E 1 F W T A.45 ±.4 [1.14 ±.1] B.71 ±.8 [1.8 ±.2] D /-. [ /-.] B D 1.39 min. [1. min.] E 1.69 ±.4 [1.75 ±.1] ØD 1 A P 1 K F.138 ±.2 [3.5 ±.5] K.45 ±.2 [1.15 ±.5] ØC ØN T 1 P.157 ±.4 [4. ±.1] P ±.4 [4. ±.1] P 2.79 ±.2 [2. ±.5] W.327 max. [8.3 max.] ØA W 1 T.8 ±.2 [.2 ±.5] A 7. ±.79 [178 ± 2.] Empty Trailer Components Empty Tape Cover Tape Leader N 2.5 [63.5] min. Unreel Direction C.51 ±.2/-.8 [13. ±.5/-.5] W /-. [ /-.] 16 mm Minimum 16 mm min. 39 mm Minimum T 1.79 ±.2 [2. ±.5] TYPICAL CUVES - Frequency Characteristics of,, and 5 ILBB-63 1 Ω 5 ILBB-63 3 Ω IMPENDANCE (Ω) IMPENDANCE (Ω) ILBB-63 4 Ω 1 ILBB-63 6 Ω evision: 16-Aug-12 2 Document Number: 3424 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PODUCTS DESCIBED HEEIN AND THIS DOCUMENT AE SUBJECT TO SPECIFIC DISCLAIMES, SET FOTH AT

3 ILBB-63 TYPICAL CUVES - Frequency Characteristics of,, and IMPENDANCE (Ω) ILBB Ω ILBB-63 8 Ω ILBB Ω ILBB Ω 2 ILBB Ω ILBB-63 3 Ω ILBB Ω ILBB Ω evision: 16-Aug-12 3 Document Number: 3424 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PODUCTS DESCIBED HEEIN AND THIS DOCUMENT AE SUBJECT TO SPECIFIC DISCLAIMES, SET FOTH AT

4 ILBB-63 TYPICAL CUVES - Frequency Characteristics of,, and ILBB-63 6 Ω ILBB Ω ILBB-63 1 Ω ILBB Ω 2 ILBB-63 2 Ω evision: 16-Aug-12 4 Document Number: 3424 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PODUCTS DESCIBED HEEIN AND THIS DOCUMENT AE SUBJECT TO SPECIFIC DISCLAIMES, SET FOTH AT

5 TAPE AND EEL in inches [millimeters] SMD Magnetics Packaging Methods Packaging Methods W User Direction of Feed PACKAGE (Pb)- BEAING (Pb)-FEE CAIE TAPE WIDTH (W) COMPONENT PITCH (P) P Carrier Dimensions PACKAGE UNITS/ PEVIOUS (Pb)- EEL BEAING (Pb)-FEE PEVIOUS EEL UNITS/ MODEL SIE BULK IHLP-1212AB - - E [12.].315 [8.] IHLP-1212AE - - E [12.].315 [8.] IHLP-1212B - - E [12.].315 [8.] IHLP-1616AB - - E [12.].315 [8.] EB 1 IHLP-1616B - - E [12.].315 [8.] EB 1 IHLP-22AB - - E [12.].315 [8.] EB 1 IHLP-22B - - E [12.].315 [8.] EB 1 IHLP-22C - - E [12.].315 [8.] EB 1 IHLP-2525AH - - E [16.].315 [8.] EB 1 IHLP-2525BD - - E [16.].315 [8.] EB 1 IHLP-2525C - - E [16.].315 [8.] EB 1 IHLP-2525E - - E [16.].472 [12.] EB 1 IHLP-3232C - - E [16.].472 [12.] EB 1 IHLP-3232D - - E [16.].472 [12.] EB 1 IHLP-44D - - E [24.].63 [16.] EB 1 IHLP-55CE - - E [24.].63 [16.] EB 1 IHLP-55E - - E [24.].63 [16.] EB 1 IHLP-55FD - - E [24.].63 [16.] EB 1 IHLP-6767D - - E [24.].945 [24.] EB 1 IHLP-6767G - - E [24.].945 [24.] EB 1 IHLM-2525C - - E [16.].315 [8.] EB 1 IHLW-44CF - - E [24.].63 [16.] EB 1 IHLW-55CE - - E [24.].63 [16.] EB 1 IFLP-44D - - E [24.].63 [16.] EB 1 IFSC-86A - - E [8.].157 [4.] IFSC-18AB - - E [8.].157 [4.] IFSC-1111A - - E [8.].157 [4.] IFSC-1111AB - - E [8.].157 [4.] IFSC-1515AH - - E [12.].315 [8.] IHSM-3825 C2 E E [24.].472 [12.] 75 P9 PJ EB 1 IHSM-4825 C2 E E [24.].472 [12.] 75 P9 PJ EB 1 IHSM-5832 C3 F E [32.].472 [12.] 5 P9 PJ EB 1 IHSM-7832 C4 G E [44.].472 [12.] 5 P9 PJ EB 1 IDC E [16.].315 [8.] IDC E [16.].472 [12.] IDC E [24.].945 [24.] IDCS E [16.].315 [8.] IDCS E [16.].472 [12.] IDCS E [24.].945 [24.] IDCP E [12.].315 [8.] IDCP E [12.].315 [8.] IDCP E (16.).472 [12.] IDCP E (16.).472 [12.] IDCP E [24.].472 [12.] IDCP E [24.].472 [12.] IFCB E [8.].79 [2.] IFCB E [8.].157 [4.] evision: 12-Dec-12 1 Document Number: 3415 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PODUCTS DESCIBED HEEIN AND THIS DOCUMENT AE SUBJECT TO SPECIFIC DISCLAIMES, SET FOTH AT

6 Packaging Methods TAPE AND EEL in inches [millimeters] PACKAGE (Pb)- BEAING EEL (Pb)-FEE SIE CAIE TAPE WIDTH (W) COMPONENT PITCH (P) PACKAGE (Pb)- BEAING (Pb)-FEE MODEL PEVIOUS UNITS/ EEL PEVIOUS ILC E [8.].79 [2.] ILC E [8.].157 [4.] ILC E [8.].157 [4.] IMC E [8.].79 [2.] IMC E [8.].79 [2.] IMC E [8.].157 [4.] IMC E [8.].79 [2.] IMC E [8.].157 [4.] IMC E [8.].157 [4.] IMC E [8.].157 [4.] IMC /B3 SY/AN E/ET [8.].157 [4.] 2 99/B4 S/9 ES/EU [8.].157 [4.] 75 B13 BN EB 5 IMC /B3 SY/AN E/ET [8.].157 [4.] 2 99/B4 S/9 ES/EU [8.].157 [4.] 75 B13 BN EB 5 IMC /92 V/ E/ET [12.].315 [8.] 5 13/91 Q/W ES/EU [12.].315 [8.] 2 B13 BN EB 5 IMCH E [12.].315 [8.] IMC E [16.].472 [12.] ISC E [12.].157 [4.] ISC /B3 SY/AN E/ET [8.].157 [4.] 2 99/B4 S/9 ES/EU [8.].157 [4.] 75 B13 BN EB 5 ISC /92 V/ E/ET [12.].315 [8.] 5 13/91 Q/W ES/EU [12.].315 [8.] 2 B13 BN EB 5 ICM E [8.].157 [4.] ICM E [8.].157 [4.] ICM E [16.].472 [12.] ICM E [24.].472 [12.] ICM E [24.].63 [16.] ILSB E [8.].157 [4.] ILSB-85 (.47 μh to 2.2 μh) - - E [8.].157 [4.] ILSB-85 (2.7 μh to 33 μh) - - E [8.].157 [4.] ILSB E [8.].157 [4.] ILBB E [8.].157 [4.] ILBB E [8.].157 [4.] ILBB E [8.].157 [4.] ILB E [8.].157 [4.] ES [8.].157 [4.] ILBB E [8.].157 [4.] ILBB E [12.].157 [4.] ILBB E [12.].157 [4.] ILHB E [8.].157 [4.] ILHB E [8.].157 [4.] ILHB E [8.].157 [4.] ILHB E [8.].157 [4.] ILHB E [8.].157 [4.] ILAS E [8.].157 [4.] LPE Y E [24.].472 [12.] 1 S51 SM EB 1 LPE Y E [24.].63 [16.] 6 S51 SM EB 1 LPE Y E [24.].63 [16.] 6 S51 SM EB 1 LPE Y E [32.].787 [2.] 3 S51 SM EB 1 LPE Y E [32.].787 [2.] 45 S51 SM EB 1 LPE-3325-CST - - E [24.].472 [12.] EB 1 LPT-3535 C5 H E [24.].63 [16.] 6 S51 SM EB 1 LPT-4545 C5 H E [24.].63 [16.] 6 S51 SM EB 1 UNITS/ BULK evision: 12-Dec-12 2 Document Number: 3415 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PODUCTS DESCIBED HEEIN AND THIS DOCUMENT AE SUBJECT TO SPECIFIC DISCLAIMES, SET FOTH AT

7 Legal Disclaimer Notice Vishay Disclaimer ALL PODUCT, PODUCT SPECIFICATIONS AND DATA AE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPOVE ELIABILITY, FUNCTION O DESIGN O OTHEWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as ohs-compliant fulfill the definitions and restrictions defined under Directive 211/65/EU of The European Parliament and of the Council of June 8, 211 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to ohs Directive 22/95/EC. We confirm that all the products identified as being compliant to Directive 22/95/EC conform to Directive 211/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS79A standards. Please note that some Vishay documentation may still make reference to the IEC definition. We confirm that all the products identified as being compliant to IEC conform to JEDEC JS79A standards. evision: 2-Oct-12 1 Document Number: 91