High Performance Schottky Rectifier, 100 A

Transcription

1 High Performance Schottky Rectifier, A VS-BGQHF4 Cathode Anode PowerTab PRODUCT SUMMARY Package PowerTab I F(AV) A V R V V F at I F 0.82 V I RM 180 ma at 125 C T J max. 175 C Diode variation Single die E AS 9 mj FEATURES 175 C max. operating junction temperature High frequency operation Low forward voltage drop Continuous high current operation Guard ring for enhanced ruggedness and long term reliability Screw mounting only AEC-Q101 qualified PowerTab package Material categorization: for definitions of compliance please see DESCRIPTION The VS-BGQHF4 Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 C junction temperature. Typical applications are in switching power supplies, converters, reverse battery protection, and redundant power subsystems. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES UNITS I F(AV) T C 124 C Rectangular waveform A V RRM V I FSM t p = 5 μs sine 6300 A V F T J 125 C A pk (typical) 0.77 V T J Range -55 to +175 C VOLTAGE RATINGS PARAMETER SYMBOL VS-BGQHF4 UNITS Maximum DC reverse voltage V R Maximum working peak reverse voltage V RWM V ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum average forward current I F(AV) 50 % duty cycle at T C = 124 C, rectangular waveform A Maximum peak one cycle 5 μs sine or 3 μs rect. pulse Following any rated load 6300 I FSM condition and with rated A non-repetitive surge current 10 ms sine or 6 ms rect. pulse V RRM applied 800 Non-repetitive avalanche energy E AS T J = 25 C, I AS = 2 A, L = 4.5 mh 9 mj Current decaying linearly to zero in 1 μs Repetitive avalanche current I AR 2 A Frequency limited by T J maximum V A = 1.5 x V R typical Revision: 16-Jun-15 1 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

2 VS-BGQHF4 ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS Note (1) Pulse width < 300 μs, duty cycle < 2 % TYP. VALUES Forward voltage drop V (1) FM 50 A T J = 25 C A A T J = 125 C A V T J = 25 C μa Reverse leakage current I (1) RM V R = Rated V R T J = 125 C ma Maximum junction capacitance C T V R = 5 V DC, (test signal range khz to 1 MHz) 25 C 1320 pf Typical series inductance L S Measured from tab to mounting plane 3.5 nh Maximum voltage rate of change dv/dt Rated V R V/μs MAX. UNITS THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum junction and storage temperature range T J, T Stg -55 to +175 C Maximum thermal resistance, junction to case R thjc DC operation 0.50 Typical thermal resistance, case to heatsink R thcs Mounting surface, smooth and greased 0.30 C/W Approximate weight 5 g 0.18 oz. minimum 1.2 (10) N m Mounting torque maximum 2.4 (20) (lbf in) Marking device Case style PowerTab BGQH I F - Instantaneous Forward Current (A) 0 10 Tj = 175 C Tj = 25 C Tj = 125 C I R - Reverse Current (ma) C 150 C 125 C C 75 C 50 C 25 C V FM - Forward Voltage Drop (V) V R - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage Revision: 16-Jun-15 2 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

3 VS-BGQHF C T - Junction Capacitance (pf) 0 T J = 25 C V R - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 1 Z thjc - Thermal Impedance ( C/W) 0.1 D = 0.75 D = 0.5 D = 0.33 D = 0.25 D = 0.2 Single Pulse (Thermal Resistance) E-05 1E-04 1E-03 1E-02 1E-01 1E+00 t 1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance Z thjc Characteristics Allowable Case Temperature ( C) Square wave (D = 0.50) 80 % rated V R applied see note (1) DC Average Power Loss (W) RMS Limit DC I F(AV) - Average Forward Current (A) I F(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics Revision: 16-Jun-15 3 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

4 VS-BGQHF4 I FSM - Non-Repetitive Surge Current (ma) At Any Rated Load Condition And With Rated V RRM Applied Following Surge t p - Square Wave Pulse Duration (μs) Fig. 7 - Maximum Non-Repetitive Surge Current D.U.T. Current monitor L IRFP460 R g = 25 Ω Freewheel diode High-speed switch 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit Note (1) Formula used: T C = T J - (Pd + Pd REV ) x R thjc ; Pd = Forward power loss = I F(AV) x V FM at (I F(AV) /D) (see fig. 6); Pd REV = Inverse power loss = V R1 x I R (1 - D); I R at V R1 = 80 % rated V R + V d = 25 V ORDERING INFORMATION TABLE Device code VS- BGQ H F product 2 - Current rating ( = A) 3 - Essential part number 4 - Voltage rating ( = V) 5 - H = AEC-Q101 qualified 6 - Environmental digit: - F4 = RoHS compliant and totally lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION VS-BGQHF Antistatic plastic tube Dimensions Part marking information Application note LINKS TO RELATED DOCUMENTS Revision: 16-Jun-15 4 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

5 Outline Dimensions PowerTab DIMENSIONS in millimeters (inches) 8.54 (0.34) 8.20 (0.32) 4.70 (0.19) 4.50 (0.18) (0.62) (0.61) (0.61) (0.58) 1.35 (0.05) 1.20 (0.04) (0.48) (0.47) Lead 1 Lead (0.71) (0.70) Ø 4.20 (Ø 0.16) Ø 4.00 (Ø 0.15) (1.08) (1.07) 39.8 (1.56) 39.6 (1.55) Ø 4.20 (Ø 0.16) Ø 4.00 (Ø 0.15) 4.95 (0.19) 4.75 (0.18) 5.45 REF. (0.21 REF.) 5.20 (0.20) 4.95 (0.19) Lead assignments 3.09 (0.12) 3.00 (0.11) 0.60 (0.02) 0.40 (0.01) 1.30 (0.05) 1.10 (0.04) (0.48) (0.47) Lead 1 = Cathode Lead 2 = Anode Revision: 08-Jun-15 1 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

6 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC definition. We confirm that all the products identified as being compliant to IEC conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 90