Schottky Rectifier, 440 A

Transcription

1 TO-244 PRODUCT SUMMARY I F(AV) V R Lug terminal anode Base common cathode 44 A 3 V Lug terminal anode 2 FEATURES 5 C operation Center tap module Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead (Pb)-free ( PbF suffix) Designed and qualified for industrial level DESCRIPTION The center tap, high current, Schottky rectifier module has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 5 C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, welding and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES UNITS I F(AV) Rectangular waveform 44 A V RRM 3 V I FSM t p = 5 µs sine 27 A V F 22 Apk, = 25 C (per leg).4 V Range - 55 to 5 C VOLTAGE RATINGS PARAMETER SYMBOL UNITS Maximum DC reverse voltage V R Maximum working peak reverse voltage V RWM 3 V ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum average per module 44 forward current I F(AV) 5 % duty cycle at T C = 25 C, rectangular waveform See fig. 5 per leg 22 A Maximum peak one cycle non-repetitive 5 µs sine or 3 µs rect. pulse Following any rated load 27 surge current per leg I FSM condition and with rated See fig. 7 ms sine or 6 ms rect. pulse V RRM applied 3 Non-repetitive avalanche energy per leg E AS = 25 C, I AS = 2 A, L = mh 98 mj Current decaying linearly to zero in µs Repetitive avalanche current per leg I AR 44 A Frequency limited by maximum V A =.5 x V R typical Document Number: For technical questions, contact: ind-modules@vishay.com Revision: 29-Apr-8

2 ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum forward voltage drop per leg See fig. Note () Pulse width < 3 µs, duty cycle < 2 % V FM () 22 A.5 = 25 C 44 A A.4 = 25 C 44 A.55 Maximum reverse leakage current per leg = 25 C 2 I () RM V R = Rated V R See fig. 2 = 25 C 2 ma Maximum junction capacitance per leg C T V R = 5 V DC (test signal range khz to MHz) 25 C 4 8 pf Typical series inductance per leg L S From top of terminal hole to mounting plane 5 nh Maximum voltage rate of change dv/dt Rated V R V/µs V THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL MIN. TYP. MAX. UNITS Maximum junction and storage temperature range, T Stg C Thermal resistance, junction to case per leg R thjc Thermal resistance, junction to case per module C/W Thermal resistance, case to heatsink R thcs -. - Weight g oz. Mounting torque 35.4 (4) (6) Mounting torque center hole 3 (3.4) - 4 (4.6) lbf in (N m) Terminal torque 3 (3.4) (5) Vertical pull " lever pull lbf in For technical questions, contact: ind-modules@vishay.com Document Number: Revision: 29-Apr-8

3 I F - Instantaneous Forward Current (A) = 5 C = 25 C = 25 C I R - Reverse Current (ma).. = 5 C = 25 C = C = 75 C = 5 C = 25 C V FM - Forward Voltage Drop (V) V R - Reverse Voltage (V) Fig. - Maximum Forward Voltage Drop Characteristics (Per Leg) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) C T - Junction Capacitance (pf) = 25 C V R - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) Z thjc - Thermal Impedance ( C/W).. Single pulse (thermal resistance) D =.75 D =.5 D =.33 D =.25 D = t - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance Z thjc Characteristics (Per Leg) P DM Notes:. Duty factor D = t /t 2 2. Peak = P DM x Z thjc + T C t t 2 Document Number: For technical questions, contact: ind-modules@vishay.com Revision: 29-Apr-8 3

4 Allowable Case Temperature ( C) Square wave (D =.5) 8 % rated V R applied See note (2) DC Average Power Loss (W) D =.2 D =.25 D =.33 D =.5 D =.75 DC RMS limit I F(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) I F(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) I FSM - Non-Repetitive Surge Current (A) At any rated load condition and with rated V RRM applied following surge t p - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) L D.U.T. IRFP46 High-speed switch Current monitor R g = 25 Ω Freewheel diode 4HFL4S2 + V d = 25 V Fig. 8 - Unclamped Inductive Test Circuit Note () Formula used: T C = - (Pd + Pd REV ) x R thjc ; Pd = Forward power loss = I F(AV) x V FM at (I F(AV) /D) (see fig. 6); Pd REV = Inverse power loss = V R x I R ( - D); I R at V R = 8 % rated V R For technical questions, contact: ind-modules@vishay.com Document Number: Revision: 29-Apr-8

5 ORDERING INFORMATION TABLE Device code 44 C N Q 3 PbF Average current rating (x ) 2 - Product silicon identification 3 - C = Circuit configuration 4 - N = Not isolated 5 - Q = Schottky rectifier diode 6 - Voltage rating (3 = 3 V) 7 - Lead (Pb)-free Tube standard pack quantity: 25 pieces Dimensions LINKS TO RELATED DOCUMENTS Document Number: For technical questions, contact: ind-modules@vishay.com Revision: 29-Apr-8 5

6 Outline Dimensions Vishay Semiconductors TO-244 DIMENSIONS in millimeters (inches) 35 (.37) REF. 3 (.5) 7 (.27) 6 (.23) 7.5 (.69) 6.5 (.65) 8 (3.5) Ø 5.2 (Ø.2) (.5) 2 2 (.82) 2 (.78) Ø 7.2 (Ø.28) (2 places) ¼" - 2 UNC 9.6 (.37) MIN. 93 (3.66) MAX. Document Number: 952 For technical questions, contact: indmodules@vishay.com Revision: 25-Jun-7

7 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2/65/EU of The European Parliament and of the Council of June 8, 2 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 22/95/EC. We confirm that all the products identified as being compliant to Directive 22/95/EC conform to Directive 2/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS79A standards. Please note that some Vishay documentation may still make reference to the IEC definition. We confirm that all the products identified as being compliant to IEC conform to JEDEC JS79A standards. Revision: 2-Oct-2 Document Number: 9