EMISSION. EN : 2006 Clause 6.5 Pass. Harmonic Current EN : 2006+A1: 2009+A2: 2009 Class A Pass

Transcription

1

2 Reference No.: WTS14S E Page 2 of 44 1 Test Summary EMISSION Test Item Mains Terminal Disturbance Voltage, 150kHz to 30MHz Telecommunication ports interference voltage, 150KHz to 30MHz Radiation Emission, 30MHz to 1000MHz Test Standard Class / Severity Result EN : 2006 Clause 6.4. Pass EN : 2006 Clause 6.4. N/A EN : 2006 Clause 6.5 Pass Harmonic Current EN : 2006+A1: 2009+A2: 2009 Class A Pass Voltage Fluctuation and Flicker EN :2013 Clause 5 Pass IMMUNITY (EN : 2006) Test Item Test Method Class / Severity Electrostatic Discharge(ESD) EN :2009 Radiation Immunity (80MHz to 1GHz) EN :2006+ A1:2008 +A2: kv Contact 8 kv Air 10V/m, 80%, 1kHz, Amp. Mod. Performance Criteria B A Result Pass Pass Electrical Fast Transients (EFT) AC input and output power ports EN :2012 1kV/5 khz B Pass Electrical Fast Transients (EFT) DC power port, Signal and control ports EN :2012 1kV/5 khz Capacitive clamp B N/A Surge for AC input and output power ports EN :2006 1kV D.M. 2kV C.M. B Pass Surge for Signal and control ports Injected Currents, 0.15MHz to 80MHz EN :2006 1kV B N/A EN :2009 3Vr.m.s.(emf), 80%, 1kHz Amp. Mod. A Pass Remark: Pass Test item meets the requirement Fail Test item does not meet the requirement N/A Test case does not apply to the test object A.M Amplitude Modulation Differential Mode Common Mode * U T is the nominal supply voltage

3 Reference No.: WTS14S E Page 3 of 44 2 Contents Page COVER PAGE 1 1 TEST SUMMARY CONTENTS GENERAL INFORMATION GENERAL DESCRIPTION OF E.U.T DETAILS OF E.U.T STANDARDS APPLICABLE FOR TESTING TEST FACILITY SUBCONTRACTED ABNORMALITIES FROM STANDARD CONDITIONS EQUIPMENT USED DURING TEST EQUIPMENT LIST MEASUREMENT UNCERTAINTY EMISSION TEST RESULTS MAINS INPUT TERMINALS DISTURBANCE VOLTAGE, 150KHZ TO 30MHZ RADIATION EMISSION, 30MHZ TO 1000MHZ HARMONICS CURRENT VOLTAGE FLUCTUATION AND FLICKER IMMUNITY TEST RESULTS PERFORMANCE CRITERIA ELECTROSTATIC DISCHARGE (ESD) RADIO-FREQUENCY ELECTROMAGNETIC FIELDS, 80MHZ TO 1GHZ ELECTRICAL FAST TRANSIENTS (EFT) SURGE INJECTED CURRENTS IMMUNITY, 0.15MHZ TO 80MHZ PHOTOGRAPHS TEST SETUP PHOTOGRAPH MAINS INPUT TERMINAL DISTURBANCE VOLTAGE TEST SETUP PHOTOGRAPH RADIATION EMISSION TEST SETUP PHOTOGRAPH HARMONIC CURRENT AND FLICKER TEST SETUP PHOTOGRAPH ESD IMMUNITY TEST SETUP PHOTOGRAPH RADIO-FREQUENCY ELECTROMAGNETIC FIELDS TEST SETUP PHOTOGRAPH EFT & SURGE IMMUNITY TEST SETUP PHOTOGRAPH INJECTED CURRENTS IMMUNITY TEST SETUP PHOTOGRAPHS CONSTRUCTIONAL DETAILS EUT APPEARANCE VIEW EUT OPEN VIEW... 40

4

5 Reference No.: WTS14S E Page 5 of Test Facility The test facility has a test site registered with the following organizations: IC Registration No.: 7760A-1 has been registered and fully described in a report filed with the Industry Canada. The acceptance letter from the Industry Canada is maintained in our files. Registration 7760A-1, July 12, FCC Registration No.: has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration , May 26, Subcontracted Whether parts of tests for the product have been subcontracted to other labs: Yes No If Yes, list the related test items and lab information: Test Lab: Lab address: Test items: N/A N/A N/A 3.6 Abnormalities from Standard Conditions None.

6 Reference No.: WTS14S E Page 6 of 44 4 Equipment Used during Test 4.1 Equipment List Equipment Name EMC Analyzer Trilog Broadban d Antenne MHz Broad-ban d Horn Antenna 1-18 GHz Broadban d Preamplifi er GHz 10m Coaxial Cable with N-male Connector s usable up to 18GHz, 10m 50 Ohm Coaxial Cable with N-plug,indi vidual length,usa ble up to 3(5)GHz, Connector Positionin g Controller Color Monitor Test Receiver Manufacturer Model Agilent/ E7405A SCHWARZB ECK MESS-ELEK TROM/ VULB9163 SCHWARZB ECK MESS-ELEK TROM/ VULB9163 SCHWARZB ECK MESS-ELEK TROM/ BBV 9718 SCHWARZB ECK MESS-ELEK TROM/ AK 9515 H Equipm ent No MY Interna l No W W W W Specification 9k-26.5GHz MHz 1-18GHz GHz Cal. Date SCHWARZB ECK MESS-ELEK TROM/ AK Due Date C&C LAB/ CC-C-IF N/A N/A SUNSPO/ N/A N/A SP-14C ROHDE&SC W2005 HWARZ/ 9k-3GHz ESPI EMI Beijingkehua KH3931 9k-1GHz Receiver n Two-Line ROHDE&SC W2005 V-Network HWARZ/ 50Ω/50μΗ ENV216 V-LISN SCHWARZB NSLK k-30MHz Cert. No Wws Wws Wws Uncertainty ±1dB ±1dB f<10 GHz: ±1dB 10GHz<f< 18 GHz:±1.5dB ±1.2dB - ±1dB ±10%

7 Reference No.: WTS14S E Page 7 of 44 Equipment Name Absorbing Clamp 10m 50 Ohm Coaxial Cable with N-plug, individual length,usa ble up to 3(5)GHz, Connector s Digital Power Analyzer Power Source Electrostat ic Discharge Simulator RF Generator CDN M-Type EM-Clamp Attenuator 6dB All Modules Generator Manufacturer Model ECK MESS-ELEK TRONIK ROHDE&SC HWARZ/ MDS-21 SCHWARZB ECK MESS-ELEK TROM/ AK 9514 Em Test AG/Switzerla nd/ DPA 500 Em Test AG/Switzerla nd/ ACS 500 Em Test AG/Switzerla nd/dito TESEQ GmbH/ NSG4070 TESEQ GmbH/ CDN M016 TESEQ GmbH/ KEMZ 801 TESEQ GmbH/ ATN6050 SCHAFFNER /6150 Equipm Interna Cal. Due Specification ent No l No Date Date W V V V W W W W W W W impandance50 Ω Loss: 17 db Fraq-range: 9K-1GHz RF voltage:-60 dbm-+10dbm Voltage correct factor 9.5 db Freq_range: MHz voltage:200v-4.4kv Pulse current:100a Power:2000VA Vol-range:0-30 0V Freq_range:10-80Hz Vol-range:0-30 0V Power_freq:10-80Hz Contact discharge:500v -10KV Air diacharge:500 V-16.5KV Power_freq distinguish0. 1Hz RFeletricity distinguish 0.1B 150K-80MHz :±1dB MHz:- 2-+3dB MHz:±4dB Other freq:±5db Cert. No Wws Wwd Wwc Wws Wwc Wwc Wws Wwc Uncertainty ±1dB Voltage distinguish:0. 025% Power_freq distinguish:0. 02Hz 7.5A current will be changed in V m =1.5V voltage: ±10% Pulse current:±10

8 Reference No.: WTS14S E Page 8 of 44 Equipment Name Capacitive Coupling Clamp Signal and Data Line Coupling Network AC Power Supply Exposure Level Tester ELT-400 Magnetic Field Probe 100cm 2 Active Loop Antenna Charger 10kHz-30 MHz Manufacturer Model SCHAFFNER / CDN 8014 SCHAFFNER / CDN 117 TONGYUN/ DTDGC-4 Narda Safety TEST Solutions/230 4/03 Narda Safety TEST Solutions/230 0/90.10 Beijing Dazhi / ZN30900A Equipm ent No M-0155 M-1070 Interna l No W w w Specification Cal. Due Date Date Cert. No Uncertainty 2KA % 1.2/50μS Test freq range:1-400khz Test freq range:1-400khz kHz-30MHz Wwc Wwc Wws Wwd Test uncertainly: 1-120kHz:±1.8 3%, 120 khz-400 khz:±4.06% Test uncertainly: 1Hz-10Hz: ±16.2%, 10Hz -120kHz:±2. 2%, 120 khz-400 khz:±4.7% ±1dB 4.2 Measurement Uncertainty Test Item Frequency Range Uncertainty Note Conduction disturbance 150kHz~30MHz 3.64dB (1) Radiation 30MHz~1000MHz 5.03dB (1) (1)This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2.

9 Reference No.: WTS14S E Page 9 of 44 5 Emission Test Results 5.1 Mains Input Terminals Disturbance Voltage, 150kHz to 30MHz Test Requirement... : EN Test Method... : EN Test Result... : Pass Frequency Range... : 150kHz to 30MHz Class/Severity... : Category C1 / Table 1 of EN E.U.T. Operation Operating Environment: Temperature... : 24.0 C Humidity... : 52.6%RH Atmospheric Pressure... : 101.2kPa EUT Operation: Power Input Voltage... : AC 230V/50Hz Operating Mode... : Charging mode Block Diagram of Test Setup The Mains Input Terminals Disturbance Voltage tests were performed in accordance with the EN m EUT Receiver PC System 0.8m 0.8m LISN Measurement Data : 50 Terminator The maximized peak emissions from the EUT was scanned and measured for both the Live and Neutral Lines. Quasi-peak & average measurements were performed if peak emissions were within 6dB of the average limit line.

10 Reference No.: WTS14S E Page 10 of Mains Terminals Disturbance Voltage Test Data Live Line:

11 Reference No.: WTS14S E Page 11 of 44 Neutral Line:

12 Reference No.: WTS14S E Page 12 of Radiation Emission, 30MHz to 1000MHz Test Requirement... : EN Test Method... : EN Test Result... : Frequency Range... : Pass 30MHz to 1000MHz Class/Severity... : Category C1/ Table 3 of EN E.U.T. Operation Operating Environment: Temperature... : 23 C Humidity... : 52.5%RH Atmospheric Pressure... : 101kPa EUT Operation: Input Voltage... : AC 230V/50Hz Operating Mode... : Charging mode and Discharging mode Remark... : The worst case is Discharging mode and the data are listed in next pages Block Diagram of Test Setup The Radiation emission tests were performed in the 3m Semi- Anechoic Chamber test site, using the setup accordance with the EN Semi-anechoic 3m Chamber Antenna Elevation Varies From 1 to 4 m Turn Table From 0 to 360 3m EUT 0.8m Turn Table PC System Spectrum Analyzer AMP Combining Network Measurement Data The maximised peak emissions from the EUT was scanned and measured for both the Antenna Vertical Polarization and Antenna Horizontal Polarization. Quasi-peak measurements were performed if peak emissions were within 6dB of the Quasi-peak limit line.

13 Reference No.: WTS14S E Page 13 of Radiation Emission test data, 30MHz to 1000MHz Antenna polarization: Vertical

14 Reference No.: WTS14S E Page 14 of 44 Antenna polarization: Horizontal

15 Reference No.: WTS14S E Page 15 of Harmonics Current Test Requirement... : EN Test Method... : EN Test Result... : Pass Class/Severity... : Remark... : E.U.T. Operation Operating Environment: Temperature... : Humidity... : Atmospheric Pressure... : Class A This testing item only apply for AC Power input. 23 C 50.4%RH 101kPa EUT Operation: Input Voltage... : AC 230V/50Hz Operating Mode... : Charging mode Block Diagram of Setup The Harmonics Current test was performed in accordance with the EN EUT AC Mains Power Analyzer AC Source 0.8m

16 Reference No.: WTS14S E Page 16 of Harmonic Current Test Data Standard used: EN/IEC Ed.3 Short cyclic Equipment class A <= 150% of the limit Observation time: 150s Windows width: 10 periods - (EN/IEC Edition 2002) E. U. T. Result Harmonic(s) > 200%: Order (n): None Harmonic(s) with average > 90%: Order (n): None Harmonic(s) between 150% and 200% during more than 10% of the test time or max. 10min: Order (n): None Power Source Result First dataset out of limit: DS (time): Harmonic(s) out of limit: Order (n): None None

17 Reference No.: WTS14S E Page 17 of 44 Average harmonic current results Hn Ieff [A] Ieff [%] Limit [A] Result E E-3 PASS E PASS E E-3 PASS E PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS

18 Reference No.: WTS14S E Page 18 of 44 Maximum harmonic current results Hn Ieff [A] Ieff [%] Limit [A] Result E PASS E PASS E E-3 PASS E PASS E E-3 PASS E PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS E E-3 PASS

19 Reference No.: WTS14S E Page 19 of 44 Maximum harmonic voltage results Hn Ueff [V] Ueff [%] Limit [%] Result E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS E PASS

20 Reference No.: WTS14S E Page 20 of 44

21 Reference No.: WTS14S E Page 21 of 44

22 Reference No.: WTS14S E Page 22 of Voltage Fluctuation and Flicker Test Requirement... : EN Test Method... : EN Test Result... : Remark... : Pass This testing item only apply for AC Power input E.U.T. Operation Operating Environment: Temperature... : 21.5 C Humidity... : 52.1%RH Barometric Pressure... : 101.2kPa EUT Operation: Input Voltage... : AC 230V/50Hz Operating Mode... : Charging mode Block Diagram of Test Setup The Voltage Fluctuation and Flicker test was performed in accordance with the EN EUT AC Mains Power Analyzer AC Source 0.8m

23 Reference No.: WTS14S E Page 23 of Voltage Fluctuation and Flicker Test Data Standard used: Observation time: EN/IEC Flicker 10 min (1 Flicker measurement) Test Result PASS Maximum Flicker results EUT values Limit Result Pst PASS Plt PASS dc [%] PASS dmax [%] PASS dt [s] PASS

24 Reference No.: WTS14S E Page 24 of 44 6 Immunity Test Results 6.1 Performance Criteria Performance criterion A: The apparatus shall continue to operate as intended during the test. No degradation of performance or loss of function is allowed below a performance level (or permissible loss of performance) specified by the manufacturer, when the apparatus is used as intended. If the minimum performance level or the permissible performance loss is not specified by the manufacturer, then either of these may be derived from the product description and documentation, and from what the user may reasonably expect from the apparatus if used as intended. Performance criterion B: The apparatus shall continue to operate as intended after the test. No degradation of performance or loss of function is allowed below a performance level (or permissible loss of performance) specified by the manufacturer, when the apparatus is used as intended. During the test, degradation of performance is allowed, however, no change of actual operating state or stored data is allowed. If the minimum performance level or the permissible performance loss is not specified by the manufacturer, then either of these may be derived from the product description and documentation, and from what the user may reasonably expect from the apparatus if used as intended. Performance criterion C: Temporary loss of function is allowed, provided the function itselfrecoverable or can be restored by the operation of the controls, or by any operation specified in the instructions for use. For further details, please refer to EN category C1.

25 Reference No.: WTS14S E Page 25 of Electrostatic Discharge (ESD) Test Requirement... : EN Test Method... : EN Test Result... : Pass Discharge Impedance... : 330 / 150pF Discharge Voltage... : Air Discharge: ±8kV Contact Discharge: ±4kV HCP & VCP: ±4kV Polarity... : Positive & Negative Number of Discharge... : Minimum 10 times at each test point Discharge Mode... : Single Discharge Discharge Period... : 1 second minimum E.U.T. Operation Operating Environment: Temperature... : Humidity... : Atmospheric Pressure... : 24 C 52%RH 101.2kPa EUT Operation: Input Voltage... : AC 230V/50Hz Operating Mode... : charging mode and discharging mode Block Diagram of Setup The ESD test was performed in accordance with the EN >1.0m 0.1m Vertical Coupling Plane ESD Generator insulating support Wall EUT 470k ohm 470k ohm Horizontal Coupling Plane 0.8m 470k ohm 470k ohm

26 Reference No.: WTS14S E Page 26 of Direct Discharge Test Results Observations: Test points: 1. All Exposed Surface & Seams; 2. All metallic part Applied Voltage (kv) Remark: Direct Discharge Performance Criterion Test Results Test Point Contact Discharge Air Discharge ±8 B 1 N/A Pass* ±4 B 2 Pass* N/A * During the test no deviation was detected to the selected operation mode(s) Indirect Discharge Test Results Observations: Test points: 1. All sides. Applied Voltage (kv) Indirect Discharge Performance Criterion Test Results Test Point Horizontal Coupling Vertical Coupling ±4 B 1 Pass* Pass* Remark: * During the test no deviation was detected to the selected operation mode(s)

27 Reference No.: WTS14S E Page 27 of Radio-frequency electromagnetic fields, 80MHz to 1GHz Test Requirement... : EN Test Method... : EN Test Result... : Pass Frequency Range... : 80MHz to 1GHz Test level... : 3V/m Modulation... : 80%, 1kHz Amplitude Modulation. Face of EUT... : Front, Back, Left, Right Antenna polarisation... : Horizontal & Vertical E.U.T. Operation Operating Environment: Temperature... : 24 C Humidity... : 52% RH Barometric Pressure... : 101.2kPa EUT Operation: Input Voltage... : AC 230V/50Hz Operating Mode... : charging mode and discharging mode Block Diagram of Setup The Radio-frequency electromagnetic fields Immunity test was performed in accordance with the EN Anechoic Chamber 3m Gestockte Breitband ( S tacked ) Log.-per.Antenna EUT Camera 0.8m Absorbers 1.5m Signal Generator RF- Amplifier

28 Reference No.: WTS14S E Page 28 of Test Results Frequency 80 to 1000MHz 80 to 1000MHz Face of EUT Antenna polarisation Test Level Step Size Dwell Time Performance Criterion Result Front, Back, Left, Right Horizontal 3V/m 1% 1s A Pass* Front, Back, Left, Right Vertical 3V/m 1% 1s A Pass* Remark: * During the test no deviation was detected to the selected operation mode(s)

29 Reference No.: WTS14S E Page 29 of Electrical Fast Transients (EFT) Test Requirement... : EN Test Method... : EN Test Result... : Pass Polarity... : Positive & Negative Repetition Frequency... : 5kHz Burst Duration... : 300ms Test Duration... : 2 minutes per level & polarity E.U.T. Operation Operating Environment: Temperature... : Humidity... : Atmospheric Pressure... : 23 C 50.3%RH 101kPa EUT Operation: Input Voltage... : AC 230V/50Hz Operating Mode... : charging mode Block Diagram of Setup The Electrical Fast Transients Immunity test was performed in accordance with the EN For AC input power ports: >0.5m Wall 0.1m wood table EUT AC Mains Test Generator For DC power port, AC output power ports, Signal and control ports: >0.5m Wall 0.1m wood table EUT Test AC Mains Clamp Generator

30 Reference No.: WTS14S E Page 30 of Test Results Test Port Test Level(kV) Performance Criterion Result Line-Neutral-PE (AC Input port) Line-Neutral-PE (AC Output port) 1.0 B PASS * 1.0 B PASS * DC power port 1.0 B N/A * Signal and control port 1.0 B N/A * Remark: * During the test no deviation was detected to the selected operation mode(s)

31 Reference No.: WTS14S E Page 31 of Surge Test Requirement... : EN Test Method... : EN Test Result... : Pass Interval... : 60s between each surge No. of surges... : 5 positive at 90, 5 negative at E.U.T. Operation Operating Environment: Temperature... : Humidity... : Atmospheric Pressure... : 24 C 52%RH 101.2kPa EUT Operation: Input Voltage... : AC 230V/50Hz Operating Mode... : charging mode Block Diagram of Setup The Surge Immunity test was performed in accordance with the EN AC input power ports: >0.5m Wall 0.1m wood table EUT AC Mains Test Generator AC output power ports: >0.5m Wall 0.1m wood table EUT AC Mains Clamp Test Generator

32 Reference No.: WTS14S E Page 32 of Test Results AC Input port: Test Port Applied Voltage (kv) Performance criterion Result Between Live And Neutral: 1 B PASS * Between Live And Earth: 2 B PASS * Between Neutral And Earth: 2 B PASS * Signal and control port 1 B N/A * AC Output port: Test Port Applied Voltage (kv) Performance criterion Result Between Live And Neutral: 1 B PASS * Between Live And Earth: 2 B PASS * Between Neutral And Earth: 2 B PASS * Signal and control port 1 B N/A * Remark: * During the test no deviation was detected to the selected operation mode(s)

33 Reference No.: WTS14S E Page 33 of Injected Currents Immunity, 0.15MHz to 80MHz Test Requirement... : EN Test Method... : EN Test Result... : Pass Frequency Range... : 0.15MHz to 80MHz Modulation... : 80%, 1kHz Amplitude Modulation E.U.T. Operation Operating Environment: Temperature... : Humidity... : Atmospheric Pressure... : 24 C 52%RH 101.2kPa EUT Operation: Input Voltage... : AC 230V/50Hz Operating Mode... : charging mode Block Diagram of Setup The Injected Currents Immunity test was performed in accordance with the IEC AC input power ports: 0.1m< L <0.3m 0.1m Wood Table EUT CDN AC Mains Attenuator 6dB Signal Generator Power Amplifier AC output power, Signal and control ports: 0.1m wood table EUT Attenuator 6dB Clamp Signal Generator Power Amplifier

34 Reference No.: WTS14S E Page 34 of Test Results Frequency Line Test Level Modulation Step Size Dwell Time Performance Criterion Result 150kHz to 80MHz 3 Wire AC Input Supply Cables 3Vr.m.s. 80%, 1kHz Amp. Mod. 1% 1s A PASS * 150kHz to 80MHz 3 Wire AC Output Supply Cables 3Vr.m.s. 80%, 1kHz Amp. Mod. 1% 1s A PASS * 150kHz to 80MHz Signal or control ports 3Vr.m.s. 80%, 1kHz Amp. Mod. 1% 1s A N/A * Remark: * During the test no deviation was detected to the selected operation mode(s)

35 Reference No.: WTS14S E Page 35 of 44 7 Photographs Test Setup 7.1 Photograph Mains Input Terminal Disturbance Voltage Test Setup 7.2 Photograph Radiation Emission Test Setup

36 Reference No.: WTS14S E Page 36 of Photograph Harmonic Current and Flicker Test Setup 7.4 Photograph ESD Immunity Test Setup

37 Reference No.: WTS14S E Page 37 of Photograph Radio-frequency electromagnetic fields Test Setup 7.6 Photograph EFT & Surge Immunity Test Setup

38 Reference No.: WTS14S E Page 38 of Photograph Injected Currents Immunity Test Setup

39 Reference No.: WTS14S E Page 39 of 44 8 Photographs Constructional Details 8.1 EUT Appearance View

40 Reference No.: WTS14S E Page 40 of EUT Open View

41 Reference No.: WTS14S E Page 41 of 44

42 Reference No.: WTS14S E Page 42 of 44

43 Reference No.: WTS14S E Page 43 of 44

44 Reference No.: WTS14S E Page 44 of 44 ======End of Report======