Tuning. Elements ROHS COMPLIANT

Transcription

1 DESCRIPTION Economical means of introducing a variable reactance to microwave circuits such as waveguides, filters, cavities and other resonant structures High resolution tuning Self-locking constant torque drive mechanism Excellent tuning stability Low dynamic noise One handed adjusting/tuning, no need for locking nut Available with Gold, Silver plating and chromate finish Metallic, dielectric, resistive types available Adjustments in applications from L to Ka band and beyond High Reliability versions are available on special order Custom design upon request compliant APPLICATIONS Comb-line and inter-digital filters Coaxial structures Waveguide circuitry Gunn oscillators Impedance transformers Space applications Temex-Ceramics Element Series AT 6997 AT 6996 AT 6995 AT 6930 AT 6965 AT 6948 AT 6929 AT 6928 AT 6927 AT 6926 AT 6925 AT 6924 AT 6952 AT 6950 AT 6935 AT 6934 AT 6933 AT Operating Frequency GHz

2 I MICROWAVE TUNING ELEMENTS consist of a brass mounting bushing with a rotor of the same material including a tuning rod made of metallic or dielectric or absorbent material and a nut. I.1 METALLIC TUNING ELEMENTS Metallic consist of a brass mounting bushing with an integral tuning rotor of the same material and a nut. Bushing is gold plated, rotor and nut are passivated. Optional materials and plating are available upon request. Frequency Bushing Band Thread UNS A B C D Φ E Φ F G AT SL AT SL X to K AT SL AT SL AT SL AT SL AT SL AT SL AT SL AT SL AT SL C and X AT SL AT SL AT SL AT SL AT SL AT SL AT SL AT SL C and X AT SL C AT SL C AT SL C AT SL C and X AT SL L and S

3 I.2 DIELECTRIC TUNING ELEMENTS Dielectric are used whenever the lowest loss tuning for high frequency applications is required. When dielectric rod is introduced into a cavity, the self resonant frequency is lowered due to the cavity appearing larger. The basic dielectrics used in Temex-Ceramics Microwave are sapphire, quartz and alumina. Electrical properties of each dielectric material are: Dielectric Material Rod Material Approximate Dielectric 10 GHz Approximate Dissipation 10 GHz Sapphire Quartz Alumina Frequenc y Band Bushing Thread UNS A B C D ΦE ΦF G AT SL Sapphire X and K AT SL Sapphire AT SL Quartz K AT SL Sapphire C, X and K AT SL Sapphire X and K I.3 RESISTIVE TUNING ELEMENTS Resistive provide a consistent and accurate means of attenuating microwave energy. Rod made of magnetically loaded epoxy exhibits broadband lossy properties. Frequency Bushing A B C D ΦE ΦF G Band Thread UNS AT SL AT SL Broad Band AT SL I.4 mmwave TUNING ELEMENTS The millimeter Wave are higher frequency versions of both described in this data sheet. Part number: AT Bushing and rotor are made of brass gold plated. Usage in the frequency bands X to K. Bushing can be mounted with solder, epoxy or press-fit.

4 Recommended rotor tuning tool AT 8762 II TUNING ROTORS Extended range metallic and dielectric rotors are used where direct insertion of the tuning element is desired. Taps designed specifically to insure proper fit are available. II.1 METALLIC TUNING ROTORS Models made of brass and dimensions in mm Thread A B Φ C D Slot W x L AT M 1.5 x x 1.1 AT M 2.5 x 2.1 AT AT x 1.9 AT AT UNS AT x 1.5 AT AT AT AT UNS AT x 3.0 AT AT AT AT AT AT UNS x 3.7 AT AT

5 II.2 DIELECTRIC TUNING ROTORS Models with dielectric rod and dimensions in mm Rod material Thread A B Φ C D Slot W x L AT Sapphire UNS 0.4 x 1.5 AT Custom models and dimensions are available upon request. III DRO TUNERS DRO tuners are precision components designed exclusively for tuning dielectric resonator devices such as filters and oscillators. Rod is made of Invar silver plated and disk made of brass silver plated. Different disk diameters are available. Nominal Frequency Disk diameter AT GHz 24.6 AT GHz 19.0 AT GHz AT

6 IV. MECHANICAL AND GENERAL SPECIFICATIONS SERIES Bushing Thread Tap Recommended Tap Drill (mm) Rotational Rotor Torque (cm.n) Max Mounting Torque (cm.n) Max Nut Mounting Torque (cm.n) AT UNS AT to AT UNS AT to AT UNS AT to AT UNS AT to AT UNS AT to AT UNS AT to AT UNS AT to AT UNS AT to AT 6935 ROKS UNS AT to AT UNS AT to AT UNS AT to AT UNS AT to AT UNS AT to Recommended rotor tuning tool: AT 8777 SERIES Rotor Thread Tap Recommende d Tap Drill (mm) Recommended Tool AT M1.5 x 0.25 AT AT 8762 AT , -1, -2 M2.5 x 0.25 AT AT UNS AT AT 8777 AT UNS AT AT UNS AT Precautions to use rotor tunings: Typical drilling diameter is the tap core diameter mm Flange of machined threads has to be perfect, very smooth, without metallic burrs. Use recommended tuning tool. Before screwing the rotor, find the first thread by turning the anti-clockwise. V. PACKAGING Parts are delivered in bulk. VI. HOW TO ORDER elements Reference Examples AT SL AT 6922

7 rotors Microwave Reference Examples AT AT DRO tuners Reference Example AT