Multifunction time relay CRM-91H, CRM-93H
|
|
- Stuart Thomas
- 5 years ago
- Views:
Transcription
1 Multifunction tie relay CRM-9H, CRM-93H < -odule, DIN rail ounted < Universal supply voltage: AC/DC V - 40V < functions: - 5 tie functions controlled via supply voltage - 4 tie functions controlled via control input - function of eory (latcing) relay < Tie scale 0. s - days divided into ranges < User-friendly setting of functions and tie via rotary switc < contact: CRM-9H x6a cangeover CRM-93H 3x8A cangeover < : ultifunction, flasing at certain states CRM9-H CRM-93H Tecnical data Nuber of functions upply upply voltage Consuption upply indication Tie ranges Tie settings Tie deviation Teperature coefficient Cangeover contacts Inrus current witcing voltage Mecanical life voltage Consuption of output Load between -A Glow-tubes Control. terinals Ipulse lengt Reset tie Operating teperature toring teperature Electrical strengt CRM-9H CRM-93H A-A -40 V AC/DC(50-60 Hz AC) AC 0,7-3 VA / DC 0,5 -,7 W 0. s- days rotary switc 5%-ecanical setting 0,%-set value stability 0,0% / C at 0 C 3 6 A / AC 8 A / AC 4000 VA / AC, 000 VA / AC, 384 W /DC 9 W / DC A / <3 s A / <3 s 50 V AC / 4 V DC 500 W ultifunction 3x 7 0,7x 5-40 V AC/DC AC 0,05-0, VA / DC 0,-0,7 W A- in. 5 s/ ax. unliited ax. 50 s C C 4 kv Mounting DIN rail EN 6075 IP 40 fro frontal panel Diensions tandards III x 7,6 x 64 EN 68-, EN 6- -odule -MODULE design DEIGN Load wit control input possible. Load between -A possible to connect in parallel way, witout disturbing of proper operation of te relay. Diensions CRM-9H CRM-93H CRM-4 MR-4 MR-4 CR 333
2 a) Delay ON after energisation b) Delay OFF after energisation c) Cycler beginning wit pause after energisation d) Cycler beginning wit ipulse after energisation e) Delay OFF after de-energisation, instant ake of output f) Delay OFF responding to ake of control contact regardless its lengt g) Delay OFF after break of control. contact wit instant output ) Delay OFF after ake and break of control. contact i) Meory (latcing) relay j) Pulse generator Tie ranges upply terinals Control. input day days upply indicator Roug tie setting Fine tie setting Function setting - ultifunction LED Exaples of signalling Function: Function: only ON only OFF contact Tie relay CRM-H < -odule, DIN rail ounted < Universal supply voltage: AC/DC V - 40V < tie functions: - cycler beginning wit pulse - cycler beginning wit pause < Tie scale 0.s - 0 days divided into tie ranges < Roug tie setting by rotary switc < contact: x 6 A cangeover < : ultifunction 334
3 Tecnical data Nuber of functions upply upply voltage Consuption upply indication Tie ranges Tie setting Tie deviation Teperature coefficient Cangeover contacts Inrus current witcing voltage Mecanical life Reset tie Operating teperature torage teperature Electrical strengt Mounting/DIN rail Diensions tandards A-A -40 V AC/DC (50-60 Hz AC) AC 0,7-3 VA / DC 0,5 -,7 W 0. s-0 days rotary switc and potentioeter 5% ecanical setting 0,% set value stability 0,0% / C at 0 C 6A / AC 4000 VA / AC, 384 W /DC A / <3 s 50 V AC / 4 V DC 500 W ultifunction 3x 7 0,7x 5 ax. 50 s C C 4 kv (supply-output) EN 6075 IP 40 fro frontal panel III,5 90x7,6x64 EN 68-, EN 6- Cycler beginning wit pulse Cycler beginning wit pulse upply indication Roug tie setting-pule Fine tie setting-pule Roug tie setting-paue Fine tie setting-paue Cycler beginning wit pause Cycler beginning wit pause CRM-H Un d 0 d 0 TIME TIME 5-8 LED U upply terinals Terinal for function selection t t Tie ranges contact d s - s 0. - in - in 0. - d 0 d 0 d 0 d day - days 3 - days - 0 days -odule -MODULE DEIGN design 0 d CRM-9H 0 CRM-93H d 0 d 0 d 0 d 0 Diensions CRM-H 335
4 Delay ON star/delta CRM-T -odule, DIN rail ounting upply voltage: AC/DC V - 40 V Generates otor starting cycle star-delta Tie t (star) - tie scale 0. s - 0 days is divided into tie ranges - roug tie setting by rotary switc - fine tie setting by potentioeter (fro 0, to) Tie t (delay) between star/delta: - tie range 0. s - s is set by potentioeter contact: x 6 A (AC) : ultifunction start up of otor ( - ) (Motor) 3 start of a otor auxiliary supply A A CRM-T Tecnical data Nuber of functions upply Universal supply Consuption upply voltage tolerance upply indication Tie ranges CRM-T A-A AC/DC -40 V (AC Hz) AC 0,7-3VA/DC 0,5-,7 W -5% - +% t: 0. s - 0 days A A 5 5 (otor) Tie setting Tie deviation Teperature coefficient Nuber of contacts Inrus current witcing voltage Mecanical life Reset tie Operating teperature torage teperature Electrical strengt rotary switc and potentioeter 5%-ecanical setting 0,%-set value stability 0,0% / C at 0 C x cangeover (AgNi) 6 A / AC 4000 VA / AC, 384 W / DC A/<3s ax. 50 V AC / 4 V DC 500 W ultifunction 3x 7 0.7x 5 ax. 50 s C C 4 kv Mounting DIN rail EN 6075 IP 40 fro front panel Diensions tandards III x 7,6 x 64 EN 68-, EN 6- U upply indication Delay ON star/delta t Roug tie setting t Fine tie setting t Fine tie setting t t A A U LED V LED 4-480V upply terinals - ultifunction LED t t contact contact Tie ranges 336 d d d d d 0. - s - s 0. - in - in 0. - d d d d d rs 0. - day - days 3 - days - 0 days 0
5 taircase switc CRM-4 Tecnical data Function upply upply voltage Consuption upply voltage tolerance upply indication Tie ranges Tie setting Tie deviation Teperature coefficient Cangeover contacts Inrus current witcing voltage Mecanical life Control. voltage Consuption of input Load between -A Glow-tubes Control. terinals Ipulse lengt Reset tie Operating teperature torage teperature Electrical strengt delay OFF A-A AC- V/50-60 Hz AC ax. VA/.8 W - 5%; + % 0,5 - in potentioeter % ecanical setting 5% set value stability 0,05% / C at 0 C 6 A / AC 4000 VA / AC, 384 W /DC A / <3 s 50 V AC / 4 V DC 500 W 3x 7 0,7x 5 AC V AC 0,53 VA yes yes, ax. 0 pcs. (at A) A- in. 5 s/ax. unliited ax. 50s C C 4 kv (supply - output) Mounting DIN rail EN 6075 IP 40 fro frontal panel Diensions tandards III,5 90x7, 6x64 EN , EN 6- L N < -odule, DIN rail ounted < upply voltage: AC V < Protection against control pus-button blocking < Tie range: 0,5 - in < elector switc: - AUTO: noral function acc. to set tie - OFF: peranent off - ON: peranent on < Tie setting via potentioeter < contact: x 6 A cangeover ( load up to 4000 VA/AC) 3-wire connection A A 50V AC 6A/4000VA upply indication 4- wire connection L N CRM-4 Un t [in] 0.5 A A 50V AC 6A/4000VA ON AUTO OFF ax. 0A upply terinals contact Function setting Tie setting switc contact CRM-4 MR-4 -odule -MODULE design DEIGN and diensions 337
6 Prograable staircase switc CRM-4 -odule, DIN rail ounted. upply voltage: AC V Intelligent staircase switc, te sae use as CRM-4, but wit increased possibility of control. In ode ''PROG'' it is possible to select te tie of delayed OFF by nuber of button-pressing sequences. Eac pressing ultiplies te tie set by potentioeter, wic tat te tie is set to 5 in and te button is pressed on 3 ties, te output is autoatically prolonged to 5 in. Te output can also be switced off earlier (reset) by a long pressing of button (longer tan sec) relay contact 6A/AC wit inrus current up to 80 A enables switcing of electrical bulbs and also fluorescent ligts. elector switc: - ON - peranent ON - AUTO - tiing according to adjusting by potentioeter in range of s - in - PROG - tiing wit tie prolongation option by a nuber of button pressing Tiing (in ode AUTO and PROG) can be stopped by long pressing of te button (longer tan sec) : ultifunctional, flasing at certain states Possibility to connect up to 0 buttons equipped wit glow laps (up-to 0A) 3-wire or 4-wire connection (it is possible to control input by potential A or A) Warning before switc OFF- output double flas 40 and sec before switc OFF 3-wire connection 4-wire connection Tecnical data upply upply voltage Consuption upply voltage tolerance upply indication Tie ranges Tie setting Tie deviation Teperature coefficient Nuber of contacts Inrus current witcing voltage CRM-4 delay OFF responsive to control contact switc on A-A AC V50-60Hz AC ax. VA /.8 W -5% - +% in. potentioeter 5%-ecanical setting 5%-set value stability 0,05% / C at 0 C, (AgnO ), switcing potential A 6 A / AC 4000 VA / AC, 384W / DC A / < 3s. ax. 50 V AC / 4 V DC 500 W Mecanical life 3x 7 0.7x 5 Reset tie ax. 50 s. Control Voltage Input consuption Glow tubes Control terinals Ipulse lengt Reset tie Operating teperature torage teperature AC V A0.53 VA yes, ax. 0 pcs. (at A) A- / A- in 50s. / ax.unliited ax. 50 s C C Mounting DIN rail EN 6075 IP 40 fro front panel Diensions tandards III x 7,6 x 64 EN , EN 6- Function ON Function AUTO Function PROG upply terinals upply indication Function settings Tie setting upply terinals funkc. ON Control terinal contacts 338
Multifunction Devices CIM1, CIM12, CIM13, CIM14
Multifunction Devices CIM1, CIM12, CIM13, CIM14 1 Features Power supply AC and DC 24... 240 V, 16... 63 Hz 1 Change-over contact 16 A or emiconductor output 1.2 A AC or 4 A DC 8 timer functions: E, A,
More informationThe sensor must not be placed behind a panel or any other material.
EAGLE THREE - N USER S GUIDE SELFMONITORED MOTION SENSOR FOR AUTOMATIC ESCAPE DOORS* TECHNICAL SPECIFICATION Technology : icrowave and icroprocessor Transitter frequency : 24.150 GHz Transitter radiated
More informationDimensions. Model Number. Features DAD15-8P/35. Optical data coupler
Dimensions Sensitivity adjuster 56 4 45 76 65 4 5 M6 5.5.7 0. 40. 4. 4. 5.5 4. 5.8 Model Number Optical data coupler Features 8 bit parallel data transfer Very large angle of divergence Can be connected
More informationDimensions. Model Number. Features DAD15-8P-R Optical data coupler
Dimensions 56 Sensitivity adjuster Mounting bracket OMH-DAD0 45 0. 76 65 4 5 5 M6.7 65.5 ø 5. 5 (4x) 5.5 6 5.8 40. 7 4. Model Number 4. 4. 5.5 Optical data coupler Features 8 bit parallel data transfer
More informationDV-72 / DV6-72 DA-72 / DA-96
ER-NA INDEX ERA- COBO REACTIVE POWER FACTOR CONTROLLER E-05 / E-09 DIGITAL ULTIETER DV-7 / DV6-7 DIGITAL VOLTETERS DA-7 / DA-96 DIGITAL APERETERS DA-7S / DA-96S DIGITAL ADJUSTABLE APERETERS DF-7 / DF-96
More informationConnection. control contact M ~ S DCF L N. 1. Setting actual time SET. Offset. Su/Wi OFF. min. OK Confirm with button. Set actual hour with buttons
LEXIC Astro time switc Rex2000 D41 Astro 037 20, 037 22, 037 NT 29 07 5 02 GB Operating instructions Tecnical data 037 20 037 22 037 Supply voltage: 230V 0V V Frequency: 50/0Hz Consumption: ca. 1,1 W Contact
More information02/11/2015
35 mm - 1 Relay 8A OUR3 Part number 88867103 Multi-function or mono-function Multi-range Multi-voltage Relay output 1 or 2 : 8 A - 250 V (10 A UL) LED status indicator Option of connecting an external
More information22/10/2012
22.5 mm DIN rail mounting TUR1 Part number 88865105 Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator Option of connecting an external power supply
More informationVAC V AC/DC, +/-10%, 45-65Hz Hz VDC max 1W ; 24VAC 2.5VA, 48VAC 4.46VA ; 110VAC 1.76 VA ; 220VAC 2.53 VA
DIN imers D 17.5mm or 22.5mm DIN rail mounting Electronic imers Wide coil operation, 24V to 320V AC/DC (from 12V with DMD-X) Multi ime range / Multi function ON-Delay, OFF-Delay, Asymetrical, Star/Delta
More information08/07/2015
17.5 mm - 1 Relay 8A MUR1 Part number 88827105 Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator (relay version) Possibility of external load connection
More informationStep relays 10 A SЕRIES. Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control. Living room light control
Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control Living room light control SЕRIES FINDER reserves the right to alter characteristics at any time without notice. FINDER
More informationT4500 AUTO SYNCHRONIZER T4800 LOAD SHARER T4900 VAR LOAD SHARER
T400 AUTO SYNCHRONIZER OAD SHARER VAR OAD SHARER T400 AUTO SYNCHRONIZER OAD SHARER VAR OAD SHARER GENERATOR CONTRO REAYS T400 AUTO SYNCHRONIZER arsen & Toubro is India s leading engineering, construction
More information02/11/2015
35 mm - 2 Relays 8A PL2R1 Part number 88867455 Multi-function or mono-function Multi-range Multi-voltage Relay output 1 or 2 : 8 A - 250 V (10 A UL) LED status indicator Option of connecting an external
More information02/11/2015
DIN Rail Mount 17.5 mm MURc3 Part number 88826503 DIN Rail Mount 17.5 mm MURc3 Part number 88826503 Just one digit differentiates the new range part number from the old range's Previous part number : 88
More informationThermistor motor protection relays
Thermistor motor protection relays Content Benefits and advantages... / 68 Selection table... / 68 Ordering details CM-MSE... / 69 CM-MSS... / 69 CM-MSN... / 7 PTC sensor C0... / 7 Technical data... /
More informationAttention High Voltage, Double / Reinforced NOT CE Mark Risk of Danger, Risk of Insulation Litter TECHNICAL SPECIFICATION
DS0 RE U/DOWN COUNTER Attention Hig Voltage, Double / Reinforced NOT CE Mark Rik of Danger, Rik of Inulation Litter Warning Electric Sock TECHNICAL SECIFICATION Dimenion : 8x8mm anel Cut-out : 5,5x5,5mm
More information08/07/2015
17.5 mm - 1 Solid State Relay 0.7A MUS2 Part number 88827004 Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator (relay version) Possibility of external
More informationRailway applications. Relays Time relays Monitoring relays Sockets
Railway applications Relays Time relays Monitoring relays ockets Devices for superior requirements Reliable and afe olutions for Railway and Transportation Applications olutions for the transport market
More informationDATASHEET - ETR4-51-A. Delivery program. Technical data General. Timing relay, star-delta, 50 ms, 1W, 3-60s, VAC/DC
DATASHEET - ETR4-51-A Timing relay, star-delta, 50 ms, 1W, 3-60s, 24-240VAC/DC Part no. ETR4-51-A Catalog No. 031884 Eaton Catalog No. XTTR6A60S51B EL-Nummer 0004133308 (Norway) Delivery program Product
More informationE N SHT-1 SHT-1/2 SHT-3 SHT-3/2
Digital time switch E N SHT-1 SHT-1/2 SHT-3 SHT-3/2 Content Symbol, Connection... 3 Warning... Characteristics... 5 Technical parameters... 6 Versions of time switches, Load... 7 Description... 8-9 Control...
More informationEMD-FL-3V-400. Electronic monitoring relay for voltage monitoring in three-phase networks. INTERFACE Data sheet _en_03. 1 Description.
Electronic monitoring relay for voltage monitoring in three-phase networks INTERFACE Data sheet 102110_en_03 1 Description PHOENIX CONTACT - 09/2009 Features Increasingly higher demands are being placed
More information3 PHASE ENERGY ELECTRONIC METERS MKT & MKT2. (Code to ) INSTRUCTION MANUAL ( M / 00 A ) (c) CIRCUTOR S.A.
3 PHASE ENERGY ELECTRONIC METERS MKT & MKT2 (Code 7 71 071 to 7 71 083) INSTRUCTION MANUAL ( M 981 200 / 00 A ) (c) CIRCUTOR S.A. ----- MKT- MKT2 - ELECTRONIC METERS -------- M-981 200 --- Page Nº 2 3
More information11/03/2013
17.5 mm DIN rail mounting MUR1 Part number 88826105 TO BE SOON REPLACED BY THE NEW CHRONOS 2 RANGE (ref. 88827...) Relay or solid state output Multi-function or mono-function Multi-range Multi-voltage
More informationCutting Plotter. CE6000 Series. Specifications CE CE AMO. Item CE CE bit CPU Grit rolling type, digital servo drive
Cutting Plotter. CE6000 Series Specifications Ite CE6000-40 CE6000-60 CPU 32-bit CPU Configuration Grit rolling type, digital servo drive CE6000-120 CE6000-120- AMO Max. cutting area 375 x 50 *1 603 x
More informationTiming Mode Supply Voltage Trigger Options Reset Options Outputs Cat. No V AC Power On Power Off. Repeat Cycle OFF-Start
Bulletin -HR Plug-in iming Relays Product election/catalog Number Explanation Bulletin ON-Delay iming Relays ocket or Panel Mounted iming Range From. s h -pin base for socket cat. nos. -HN, -HN, -HN rigger:
More informationOTi DALI 80/ /24 TW OTi DALI 50/ /24 TW
www.osra.co OTi DALI 80/220-240/24 TW OTi DALI 50/220-240/24 TW 24 V DALI Constant Voltage LED driver Diable range 0% - 100% Benefits Sli for factor for ounting on the cove or into luinaires. DALI Device
More information02/11/2015
DIN Rail Mount 17.5 mm MXR1 Part number 88826185 Just one digit differentiates the new range part number from the old range's Previous part number : 88 826 XXX / new part number : 88 827 XXX Part numbers
More informationModular step relays 16 A
Automation for blinds, grilles and shutters Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control Living room light control SЕRIES FINDER reserves the right to alter characteristics
More information24/07/2012
17.5 mm DIN rail mounting MURc3 Part number 88826503 Relay or solid state output Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator (relay version)
More information27/04/2015
Modular Carril DIN 35 mm HIL Part number 84871120 Control of AC and DC currents Automatic recognition of AC/DC Measurement ranges from 2 ma to 10 A Choice between over and undercurrent True RMS measurement
More informationRelais und Automatisierungssysteme JUST IN TIME. with the. New Generation NGG. from Schleicher NGG CATALOGUE
JUST IN TIME with the New Generation NGG from Schleicher NGG CATALOGUE General information on the New Generation NGG Quality control 2 Norms, regulations, approvals 2 Housing system, conductor sizes 3
More informationMonitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC71, PPC71
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC71, PPC71 DPC71 PPC71 TRMS 3-phase over and under voltage, phase sequence, phase loss, asymmetry and tolerance monitoring relay Detect
More information05/09/2012
17.5 mm EMER8 Part number 88829198 Multifunction or mono-function Multi-range (7 ranges) Multi-voltage or single voltage Screw terminals LED status indicator (1 voltage present LED, 1 timer ON LED) Option
More informationElectronic timers CT-S range Selection and ordering details
CT-S range Selection and ordering details Characteristics CT-S range CT-MFS 1SVR 430 010 F 0200 3 multifunction and 21 multi-range Continuous supply voltage range (24-240VAC/DC) or multisupply voltage
More informationThermistor motor protection relays
Thermistor motor protection relays Content Benefits and advantages... / 68 Selection table... / 68 Ordering details CM-MSE... / 69 CM-MSS... / 69 CM-MSN... / 7 PTC sensor C0... / 7 Technical data... /
More informationIMPULSE SWITCH, REMOTE SWITCH
W REMOTE SWITCH STELLA W SCHRACK INFO Low switching noise Energy saving function 0.5 30 minutes High switching capacity, 80 A start-up peak LED display LQ540000 W APPLICATIONS 220 The ideal solution for
More informationCurrent monitor Type C 551
Current monitor Type C 551 Relay for current monitoring, single-phase Monitoring AC and DC for overcurrent or undercurrent 1 yellow LED for indication of the relay state 1 green LED for indication of the
More informationMonitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01, PPC01
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01, PPC01 DPC01 PPC01 TRMS 3-phase over and under voltage, phase sequence, phase loss, asymmetry and tolerance monitoring relay Detect
More information02/11/2015
Emergency stop and safety guard monitoring 2 channels KNE3-YS Part number 85102436 "Emergency stop" & "Safety gates monitoring" functions Single and 2-channel operation Security with redundancy and feedback
More informationMonitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01, PPC01
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01 Product Description 3-phase or 3-phase+neutral line voltage monitoring relay for phase sequence, phase loss, asymmetry, over and
More informationMT 560/UMT TRANSDUCER & ANALYZER
MT 560/UMT 560 - TRANSDUCER & ANALYZER USE The MT 560/UMT 560 multi transducer and analyzer is used for a permanent analysis of electricity supply quality in compliance with the SIST EN 50160 standard.
More informationKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDOMs and any page number shown is relevant to the original document. The PDF sheets here may have
More information2.1 Monofunction Time Relays
. s Time Relays. pplication s Functions* Min. time Max. time contact rating ocket CMD, 0 ms 60 min / 0 V DIN * (Function diagrams: refer to page ) This issue replaces all previous issues. vailability,
More informationModular timers A
Modular timers 1-6 - 8-16 A Building automation Elevators and lifts 80 SЕRIES Automation for blinds, grilles and shutters oists and cranes Panels for electrical distribution Door and gate openers FINDER
More information02/11/2015
17.5 mm - 1 Relay 5A EMER8 Part number 88829198 Multifunction or mono-function Multi-range (7 ranges) Multi-voltage or single voltage Screw terminals LED status indicator (1 voltage present LED, 1 timer
More informationLow Light H.264 Multi User Weather-proof
www.dalleier.co Variants S /12 and S 3/2 Multifocal Sensor Syste with Sensors 3 K Ultra HD Ready 16 (1 ft) >12 px/ (38 px/ft) Recognition Distance S /12 86 (282 ft) >12 px/ (38 px/ft) Recognition Distance
More informationV2IM10AL10 Art.Nr.: V2IM10AL10P Art.Nr.: Control element. Tripping delay. Function selector. Status indication 24...
P AC/DC current monitoring Multifunction Supply voltage 24-240V DC or 110-240V AC 1 change-over contact Width 22,5 mm Control element Tripping delay Maximum threshold Minimum threshold Function selector
More informationPRELIMINARY DATA SHEET RI-D140. Three Phase Multifunction DIN Rail Energy Meter (MID Certified) MID
RI-D140 Three Phase Multifunction DIN Rail Energy Meter (MID Certified) Four module DIN rail mounted Energy pulse LED True RMS measurement Cost effective and accurate Modbus communication -/1A or -/5A
More informationRI-D440. Three Phase easywire Multifunction DIN Rail Energy Meter. Telephone : +44 (0) Displayed Parameters
RI-D440 Three Phase easywire Multifunction DIN Rail Energy Meter Four module DIN rail mounted Energy pulse LED 330mV Input from easywire CTs (or -/1A and -/5A current transformer input with TAS-SCTEWA
More informationMeasuring Transducer MT4xx series Programmable AC Current Transducer MT418
Measuring Transducer MT4xx series Programmable AC Current Transducer MT418 o RMS AC current or frequency measurements o Current auto range measurements up to 12 A o Frequency measurement range 16 400 Hz
More informationMulti-function 11 pin Plug-in for use with 90 series sockets
88 eries - lug-in timers 5-8 A Features 88.02 88.12 Multi-voltage and multi-function timer range Front panel or socket mount 8-11 pin plug-in version available ime scales from 0.05s to 100h 1 delayed contact
More information38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
More informationElectronic timer CT-MFS.21
2CDC 251 053 F0t07 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c Rotary switch for the preselection of the
More information38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
More informationMulti-function 11 pin Plug-in for use with 90 series sockets
88 88 Multi-voltage and multi-function timer range Front panel or socket mount 8 and 11 pin plug-in versions available Time scales from 0.05 s to 100 h 1 delayed contact +1 instantaneous contact version
More informationV2UM230V10 Art.Nr.: V2UM230V10P Art.Nr.: Control elements. Tripping delay. Function selector. Status indication 230 V AC/DC
P AC/DC voltage monitoring Multifunction Supply voltage 24 V DC or 230V AC/DC Supply circuit = Measuring circuit 1 change-over contact Width 22,5 mm Control elements Tripping delay Maximum threshold Minimum
More informationBU: EPBP GPG: DIN Rail Products Devices for the permanent control of insulation on supply lines for medical locations ISOLTESTER-DIG-RZ/RS/PLUS
INSTRUCTION MANUAL BU: EPBP GPG: DIN Rail Products Devices for the permanent control of insulation on supply lines for medical locations ISOLTESTER-DIG-RZ/RS/PLUS 1/23 More information than that reported
More informationInstallation Instructions
For tecnical assistance, call 1-800-849-TECH (8324) or 336-725-1331 between 8 AM & 5 PM EST Monday troug Friday (Excluding Holidays) Installation Instructions Kaba Access Control 2941 Indiana Avenue Winston-Salem,
More informationBONOMI NORTH AMERICA SERIES 500N - 500S
BOI RTH AERICA SERIES 500N - 500S NYON COATED DISC CF SS DISC anually operated butterfly valves. Epoxy coated cast iron wafer body. Full port sizes / to. EPD resilient seat -0 F to 50 F. API609 face to
More informationDATA SHEET Selectable AC transducer TAS-311DG
DATA SHEET Selectable AC transducer Measuring on AC networks Class 0.5 (IEC688) measurement Supply/measur. voltage up to 690 V Easy configuration via PC interface possible DEIF A/S Frisenborgvej 33 DK-7800
More informationRENF22R2MMW Zelio Timer Relay - Modular
Characteristics Zelio Timer Relay - Modular Main Range of product Product or component type Device short name Operating system Software version Software designation Complementary Discrete output type Nominal
More informationTheta 20A / 20V. Technical Data Sheet. Special Features
Technical Data Sheet Theta 20A / 20V Theta 20A / 20V is used to measure and convert AC Voltage or Current input into a load independent DC current or voltage output signal. Special Features Available in
More informationElectronic timer CT-AWS Impulse-OFF with 1 c/o contact Data sheet
2CDC 251 121 F0004 1 5 2 4 3 6 Characteristics Single-function impulse-off timer One device includes 10 time ranges, from 0.05 s to 300 h, for the adjustment of the pulse time Remote potentiometer connection
More informationChronos 2 electronic timers mm
hronos electronic timers.5 mm elay output DDP relay Multifunction or monofunction Multirange (7 ranges, available options) Multivoltage Output : 50 V ( L) Screw or spring terminals LED status indicators
More informationAccuBridge TOWARDS THE DEVELOPMENT OF A DC CURRENT COMPARATOR RATIO STANDARD
AccuBridge TOWARD THE DEVELOPMENT OF A DC CURRENT COMPARATOR RATO TANDARD Duane Brown,Andrew Wachowicz, Dr. hiping Huang 3 Measureents nternational, Prescott Canada duanebrown@intl.co, Measureents nternational,
More information650 PHOENIX CONTACT Courtesy of Power/mation Energy Lane, Saint Paul, MN
650 PHOENIX CONTACT Monitoring relays, timer relays, function blocks The requirements pertaining to safety and system availability are constantly increasing regardless of the industry. Processes are becoming
More informationAC/DC. Monitoring Technique. VARIMETER IMD Insulation monitor RN 5897/300
Monitoring Technique VARIMETER IMD Insulation monitor RN 5897/300 0274214 Your Advantages For mobile generator sets according to DIN VDE 0100-551 Preventive fire and system protection Detection of symmetric
More informationM.3. Electrical measurement and control. Electrical energy meters for partial consumption
M.3 Electrical measurement and control Electrical energy meters for partial consumption M.3 Electrical energy meters for partial consumption M.3 - Electrical energy meters for partial consumption Introduction
More information38 SERIES. Relay interface modules A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.
38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
More informationInstantaneous Overcurrent Relay
Midos Type MCRI Instantaneous Overcurrent Relay Features High speed operation Not slowed by dc transients Settings readily adjustable on relay front plate Two phase and earth fault relay Figure 1: Type
More informationTechnical Data Sheet. x1000. kwh R Y B
Technical Data Sheet x1000 Von kwh IRev 3600 imp /kwh R Y B is a compact multifunction instrument which is a 96mm x 96mm panel mounted kilowatt hour meter it measures active energy with class 1.0 accuracy
More information02/11/2015
Standstill monitoring KSW3-JS Part number 85102331 Function "Stillstand detection without sensors" Independent of rotation direction Security with redundancy and feedback circuit 3 forcibly guided "NO"
More informationBrighten your outlook
Ligting Brigten your outlook Long Life MR-16 Pilips Halogen Long Life MR16 lamps make it easy to optimize te look and feel of your brand, your mercandise, and te soppers experience, wit lower operating
More informationMulti-voltage Multi-function. BE: Off-delay with control signal BE: Off-delay with control signal CE: On- and off-delay with control signal
83 Modular timers 12-16 A 83 Multi-function timer range 83.01 - Multi-function & multi-voltage, 1 Pole 83.02 - Multi-function & multi-voltage, 2 Pole (timed + instantaneous options), external time setting
More informationEnergy Management Three-phase energy meter with output modules Type EM4-DIN
Energy Management Three-phase energy meter with output modules Type EM4-DIN Class 1 (active energy) Class 2 (reactive energy) Three-phase multi-function energy meter Back-lighted LCD display 3 1 / 2 DGT
More informations s s 3-60 s min min 3-60 min h h 3-60 h V AC, 50/60 Hz
HPL11002EN DILETTiming relays Rated operational current AC-11 230 V 400 V I th I e I e A A A A A Conventional thermal current Time Range Voltage Article No. See price list Std. pack On-delayed Timing functions
More informationSelection tables Command devices E 250 latching relays
E 50 latching relays E 50 E 50 Latching relays Allow switching of the contacts in response to each pulse sent to the coil via the normally open pushbuttons. Their high performance in the single or multi-point
More informationn True RMS measurement n Fully onsite programmable input voltage range (for CIP-V)
Tranducers for alternating current/voltage n True RMS measurement n Fully onsite programmable input voltage range (for CIP-V) and input current range (for CIP-I) n Available in single or dual output type
More informationVEO. V2PF480Y/277VS01 Art.Nr.: B TECHNICAL DATA
Monitoring of phase sequence and phase loss Monitoring of asymmetry Supply voltage 208-480 V AC Supply circuit = measuring circuit 1 change-over contact Width 22,5 mm Status indication LED U: Supply voltage
More informationSafety Switches with Separate Actuator, Plastic Housing
Selection table for safety switces STP wit guard locking and guard lock monitoring Version Standard TW BI One actuating ead made of metal TWIN, 2 actuating eads made of metal BiState, wit additional safety
More information83 SERIES. 83 Series - Modular timers A. Features
Features 83 Series - Modular timers 12-16 A 83.01 83.02 83 Multi-function timer range 83.01 - Multi-function & multi-voltage, 1 Pole 83.02 - Multi-function & multi-voltage, 2 Pole (timed + instantaneous
More informationTotalizing Counters mini-i
mini-i Type 634/635 Type 634: Counter with high immunity against magnetic interfere Type 635: Counter with high shock stability Miniature size Low power consumption Electrical connections in standard grid
More informationMulti-voltage Multi-function. Wiring diagram (without control signal)
80 Modular timers 16 A 80 Multi-function and mono-function timer range 80.01T - Multi-function & multi-voltage 80.11T - On-delay, multi-voltage Complies with EN 45545-2:2013 (protection against fire of
More informationRE22R2MYMR Multi-function Timing Relay s 300h V AC/DC - 2C/O
Product datasheet Characteristics RE22R2MYMR Multi-function Timing Relay - 0.05s 300h - 24 240V AC/DC - 2C/O Main Range of product Product or component type Discrete output type Device short name Nominal
More informationInstallation- / Monitoring Technique
Installation- / Monitoring Technique VARIMETER Insulation fault locator RR 5887 0269248 Product Description 4-channel design The locating current generator RR 5886 in connection with the insulation fault
More informationElectronic timer CT-MVS.23 Multifunctional with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-MVS.23 Multifunctional with 2 c/o (SPDT) contacts The CT-MVS.22 is a multifunctional electronic timer from the CT-S range. It provides 11 timing functions and 10 time ranges.
More informationSynchroniser Relay SYN-7
Synchroniser Relay SYN-7 1/19 Index 1 General Remarks...3 2 Operating Principle...3 2.1 Isolated Operation (Firmware Version V1.14 or higher)...4 2.2 Usage as a locking Relay...4 2.3 Switching onto Dead
More informationISOMETER IRDH575. Approvals
Insulation monitoring device for unearthed AC, DC and AC/DC systems (IT systems) with control and display function for EDS insulation fault location systems IRDH575_D00089_02_D_XXEN/09.2018 Insulation
More informationRE22R2MMU Multifunction Timer Relay - 24VDC/ V AC - 2 C/O
Product data sheet Characteristics RE22R2MMU Multifunction Timer Relay - 24VDC/24..240 V AC - 2 C/O Main Range of product Product or component type Discrete output type Device short name Nominal output
More informationCatalog 200 Contactors up to 115 A Motor Starters up to 55 kw 03/2009
Catalog 00 Contactors up to 5 A Motor Starters up to 55 kw 03/009 Kraus & Naimer The development of the Blue Line rotary switch, contactor and motor starter product ranges is based on more than hundred
More informationEnergy Management Energy Meter with plug-in Output Modules Type EM4-DIN
Energy Management Energy Meter with plug-in Output Modules Type EM4-DIN Degree of protection (front): IP 40 Front dimensions: 9 DIN modules RS 422/485 Serial port by means of optional module Dual pulse
More informationDATASHEET - ETR4-70-A. Delivery program. Timing relay, 2W, 0.05s-100h, multi-function, VAC/DC, potentiometer connection
DATASHEET - ETR4-70-A Delivery program Timing relay, 2W, 0.05s-100h, multi-function, 24-240VAC/DC, potentiometer connection Part no. ETR4-70-A Catalog No. 031888 Eaton Catalog No. XTTR6A100H70B EL-Nummer
More informationElectronic impulse switches the silent revolution
12 Electronic impulse switches the silent revolution 12 Electronic impulse switches Selection table electronic impulse switches 12-2 Impulse switch ES12DX 12-3 Impulse switch ES12-200 12-4 Impulse switch
More informationInstallation / Monitoring Technique
Installation / Monitoring Technique VARIMETER RCM Residual Current Monitor, Type B for AC and DC Systems IP 5883 0249633 IP 5883 ND 5018/035 ND 5018/030 According to IEC/EN 62 020, VDE 0663 For AC and
More informationXUA1 AC Voltage and phase balance relay. (August 1996) Manual XUA1 (Revision New)
XUA1 AC Voltage and phase balance relay (August 1996) Manual XUA1 (Revision New) Woodward Manual XUA1 GB Woodward Governor Company reserves the right to update any portion of this publication at any time.
More informationinternally isolated from Input and Output Circuitry. Reverse Loop Protection maximum ambient temperature.
YUTECH DATASHEETS: DC ISOLATORS AND CONVERTERS DC Current Isolator also called as DC Current Isolation Barrier: Various Input and Output Options for DC Current Isolators are as below: DC Current Isolator
More informationKEY FEATURES. Selectable modes of control : Phase Angle or Burst Fire (Single- Cycle/Dual-Cycle & adjustable STD Burst Firing)
X20092 DMFC36 Issue: 2 User manual Date: 31/10/14 Page: 1 of 10 KEY FEATURES Standard DIN Rail Mounting Selectable modes of control : Phase Angle or Burst Fire (Single- Cycle/Dual-Cycle & adjustable STD
More informationElectronic timer CT-MVS.23 Multifunctional with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-MVS.23 Multifunctional with 2 c/o (SPDT) contacts The CT-MVS.23 is a multifunctional electronic timer from the CT-S range. It provides 11 timing functions and 10 time ranges.
More informationXU2-AC AC voltage relay. (Februar 1997) Manual XU2-AC (Revision New)
XU2-AC AC voltage relay (Februar 1997) Manual XU2-AC (Revision New) Woodward Manual XU2-AC GB Woodward Governor Company reserves the right to update any portion of this publication at any time. Information
More informationEA16, EB16, EA17, EA19
MOVING-IRON METERS EA16, EB16, EA17, EA19 and EA12 TYPES AMMETERS and VOLTMETERS CATEGORIES OF METER CLIMATIC VERSIONS If it is not written otherwise in the order, these meters are intended to use in moderate
More information