Railway applications. Relays Time relays Monitoring relays Sockets

Transcription

1 Railway applications Relays Time relays Monitoring relays ockets

2 Devices for superior requirements Reliable and afe olutions for Railway and Transportation Applications olutions for the transport market need to guarantee safety, security and comfort. The applications are expected to last a long time under challenging conditions. Be it for high-speed trains, metros, subways or other rail vehicles in tunnels, on bridges, in train stations, airports, on the open track, or in harbor facilities, the Comat Releco Group has the right solution for different kind of applications. We offer a wide range of relays, control and monitoring devices that are developed in compliance with the European Railway tandard EN 5055 (including also EN 6373, EN and NF F 6-0/0). The EN 5055 standard applies for all electronic devices such as command, control, protection units, as well as power supplies, which are used in the transportation market. It applies either to the accumulator battery side or also the low-voltage power supply part of the vehicle. Regarding fire protection, the products offered in this brochure are manufactured in accordance with standard NF F 6-0/0. A table a the last page of this brochure shows the overview of the products and the standards they comply with. Individual declarations of conformity are available on demand. Please do not hesitate to contact us for any further questions or comments. Comat AG Bernstrasse Worb witzerland info@comat.ch

3 Railway applications Index. Relays Page 3 Long life series with single contacts C3D/R 4 Long life series with twin contacts C3D/R 5 tandard relay R3-N3x 6 tandard relay R4-A4x 7 Miniature relay R7-Ax 8 Miniature relay R7-Tx 9 Interface relay CINT- 0 Interface relay CINT- Interface relay CINT-5 Interface relay CINT-6 3 Interface relay CINT-6 4 Interface relay CINT-63 5 ignal relay C03.06R 6 Power relay RIC0-x 7 Power relay RIC5-x 8. Time Relays Page 9 Time functions 0 Multifunction Timer, relay change-over CIMR Multifunction Timer, solid-state AC CIMR Multifunction Timer, solid-state DC CIM3R 3 Multifunction Timer, relay change-over CIMR 4 Multifunction Timer, solid-state AC CIMR 5 Multifunction Timer, solid-state DC CIM3R 6 Multifunction Timer, relay change-over CIM3R 7 Multifunction Timer, semi-conductor AC CIM3R 8 Multifunction Timer, semi-conductor DC CIM33R 9 CT-ystem: Plug-in time modules CT3R, CT33R, CT36R 30 Plug-in time relays CT3 R, CT33 R, CT36 R 3 3. Monitoring Relays Page 33 -phase monitoring MRUR 34 3-phase monitoring MRU3R 35 -phase monitoring MRIR 36 3-phase monitoring MRI3R 37 -phase monitoring MRMR 38 3-phase monitoring MRM3R 39 CT-ystem: Plug-in current monitoring modules CT5R, CT55R, CT56R 40 Plug-in current monitoring set CT5 R, CT55 R, CT56 R 4 Plug-in DC voltage monitoring module CT54R 4 Plug-in DC voltage monitoring set CT54 R 4 monitoring EU-DR ockets Page 45 ocket for pin relays and plug-in modules CA (for relays: C3D/R, C3D/R, R3-N3) 46 ocket for pin relays and plug-in modules CB0 (for relays: C3D/R, C3D/R, R3-N3) 47 ocket for 4 pin relays C-44 (for relays: R4-A4x) 48 ocket for miniature relays C-8 (for relays: R7-x) 49 4Monitoring ockets 3Time Relays Relays

4 Notes Railway/0a. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.

5 Relays. Relays Application Types Output contacts Design pin plug-in, long life relay C3D/R 0A, 50V AC- pin plug-in, long life relay C3D/R 6A, 50V AC- pin plug-in, standard relay R3-N3 6A, 50V AC- 4 pin plug-in, standard relay R4-A4 0A, 50V AC- 8 pin plug-in, miniature standard relay R7-A 0A, 50V AC- 8 pin plug-in, miniature standard relay R7-T 6A, 50V AC- Interface relay CINT- 6A, 50V AC- Interface relay CINT- 6A, 50V AC- Interface relay CINT-5 A, 50V AC- Interface relay CINT-6 0A, 50V AC- Interface relay CINT-6 8A, 50V AC- Interface relay CINT-63 8A, 50V AC- Interface relay C03.06 x A, 5V AC- Power relay RIC0- ; ; 0A, 30V AC- Power relay RIC5- ; ; 5A, 30V AC- This issue replaces all previous issues. Availability, errors and specifications subject to change without notice. Railway/0a. 3

6 Long life series with single contacts C3D/R pin plug-in relay, 3-pole, change-over contacts, according to IEC Type: C3D/R V Long Life Relays for Railway application, 3 change-over contacts Types with LED status indicator Types with free wheeling diode Manual actuator and mech. status indicator Maximum contact load Recommended minimum contact load 0 A / 50 V AC- 0 A / 30 V DC- 50 ma / 0 V Contacts Type single contact micro disconnection Material AgCuNi Rated current 0 A Inrush current max. (0 ms) 40 A witching voltage AC- max. 50 V AC load max. 500 VA AC- DC load max. see Fig. Coils (Values are valid at 0 C) Operating voltage range Nominal power DC U N. W Coil Table V N DC Ω ma Types with LED indicator take additional 5 0 < 80 V Cycles Fig. AC voltage endurance A (+) A 0 AC- Pulse (. / 50 us / Dielectric strength (V rms, minute) Contact / coil /.5 kv Contact / contact /.5 kv Contact open /.5 kv General pecifications Ambient temperature operation / storage C / C Pick-up time typ. ms Release time typ. 0 ms Bounce time NO contact typ. 3.5 ms Mechanical life 0 8 operations Operating frequency at nominal load 360 operations / h Ingress protection rating IP g witching current [A] Fig. DC load limit curve DC- L/R 40 ms tandard types DC: 4, 36, 7, 0 V " " Enter the voltage for full type designation C3D/R DC V Voltage [V] Accessories ocket: CA, CB A A ee table on page Railway/0a. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.

7 Long life series with twin contacts C3D/R pin plug-in relay, 3-pole, change-over twin contacts, according to IEC Type: C3D/R V Long Life Relays for Railway application, 3 change-over twin contacts Types with LED status indicator Types with free wheeling diode Manual actuator and mech. status indicator Maximum contact load Recommended minimum contact load 6 A / 50 V AC- 6 A / 30 V DC- 0 ma / 5 V Relays Contacts Type twin contact micro disconnection Material AgCuNi Rated current 6 A Inrush current max. (0 ms) 5 A witching voltage AC- max. 50 V AC load max. 500 VA AC- DC load max. see Fig. Coils (Values are valid at 0 C) Operating voltage range Nominal power DC U N. W Coil Table V N DC Ω ma Types with LED indicator take additional 5 0 < 80 V Cycles Fig. AC voltage endurance A (+) A 0 AC- Pulse (. / 50 us / Dielectric strength (V rms, minute) Contact / coil /.5 kv Contact / contact /.5 kv Contact open /.5 kv General pecifications Ambient temperature operation / storage C / C Pick-up time typ. ms Release time typ. 0 ms Bounce time NO contact typ. 3.5 ms Mechanical life 0 8 operations Operating frequency at nominal load 360 operations / h Ingress protection rating IP g tandard types DC: 4, 36, 0 V " " Enter the voltage for full type designation Accessories ocket: C3D/R DC V CA, CB witching current [A] Fig. DC load limit curve Voltage [V] 35 DC- L/R 40 ms 3 A A ee table on page 53. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice. Railway/0a. 5

8 tandard Relays R3-N3 -pin plug-in relay, 3-pole, change-over contacts, according to IEC Type: R3-Nxx/ V Relays for Railway application, 3 change-over contacts Maximum contact load 6 A / 50 V AC-, 6 A / 30 V DC- Recommended minimum contact load 0 ma / 0 V Code 4 5 ma / 5 V Code 8 Contacts Material Optional Code 4 AgNi +0.µ Au Optional Code 8 AgNi +0µ Au Rated current 6 A Inrush current max. (0 ms) 5 A witching voltage AC- max. 50 V AC load max. see Fig. DC load max. see Fig. Coil (Values are valid at 0 C) Coil resistance see table; tolerance ± 0 % Operating voltage range U N Nominal power. W A (+) A 0 Coil Table V DC Ω ma Pulse (. / 50 us / Dielectric strength (V rms, minute) Contact / coil 4 kv /.5 kv Contact / contact 4 kv /.5 kv Contact open.5 kv / kv pecifications Ambient temperature operation / storage -5 (no ice) +70 ºC / C Pick-up time / bounce time 8 ms / 3 ms Release time / bounce time (D version) 35 ms / ms Mechanical life > 0 millions Ingress protection rating IP g tandard types DC: 4, 48, 7, 0 V R3-N34/DC V R3-N38/DC V Free wheeling diode R3-N34D/DC V R3-N38D/DC V LED R3-N34X/DC V R3-N38X/DC V LED + free wheeling diode R3-N34DX/DC V R3-N38DX/DC V* "..." Enter the voltage for full type designation Cycles Fig. AC voltage endurance witching current [A] Fig. DC load limit curve AC- cos phi 0.4 DC- L/R 40 ms Voltage [V] Accessories ocket: Optional accessories (blanking plug): CA, CB0 O-NP, O-OP A 0 A ee table on page Railway/0a. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.

9 tandard Relays R4-A4 4-pin plug-in relay, 4-pole, change-over contacts Type: R4-A4xx/ V Relays for Railway application, 4 change-over contacts Relays Maximum contact load 6 A / 50 V AC-, 0.5 A / 0 V DC- 6 A / 30 V DC-, 0. A / 0 V DC- Recommended minimum contact load 0 ma / 0 V Code 4 5 ma / 5 V Code 8 Contacts Material Optional Code 4 AgNi + 0,µ Au Optional Code 8 AgNi + 0µ Au Rated current 6 A Inrush current max. (0 ms) 8 A witching voltage AC- max. 50 V AC load max. see Fig. DC load max. see Fig A (+) Coil (Values are valid at 0 C) Coil resistance see table; tolerance ± 0 % Operating voltage range U N Nominal power.4 W Coil Table V DC Ω ma Pulse (. / 50 us / Dielectric strength (V rms, minute) Contact / coil 4 kv /.5 kv Contact / contact 4 kv /.5 kv Contact open.5 kv / kv pecifications Ambient temperature operation / storage -5 (no ice) +55 C / C Pick-up time / bounce time 5 ms / ms Release time / bounce time 0 ms / ms Mechanical life > 0 millions Ingress protection rating IP40 90 g tandard types DC: 4, 36, 48, 7, 0 V R4-A44/DC V R4-A48/DC V LED R4-A44X/DC V R4-A48X/DC V Free wheeling diode R4-A44DX/DC V R4-A48DX/DC V Polarity and free wheeling diode R4-A44FX/DC V R4-A48FX/DC V Cycles Fig. AC voltage endurance Fig. DC load limit curve 6 DC- 4 L/R 40 ms witching current [A] A 4 AC- cos phi Voltage [V] "..." Enter the voltage for full type designation Accessories ocket: Optional accessories (blanking plug): C-44 O-NP, O-OP ee table on page 53. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice. Railway/0a. 7

10 Miniature relays R7-A 8-pin plug-in miniature relay, -pole, change-over contacts Type: R7-Ax/ V Relays for Railway application, sensitive, change-over contacts Maximum contact load: 0 A / 50 V AC-, 0 A / 30 V DC- Recommended minimum contact load 0 ma / 0 V Code 4 5 ma / 5 V Code 8 Contacts Material Optional Code 4 AgNi + 0.µ Au Optional Code 8 AgNi + 0µ Au Rated current 0 A Inrush current max. (0 ms) 30 A witching voltage AC- max. 50 V AC load max. see Fig. DC load max. see Fig. Coil (Values are valid at 0 C) Coil resistance see table; tolerance ±0 % Operating voltage range U N Nominal power. W A(+) A 8 Coil Table V DC Ω ±0% ma Fig. AC voltage endurance 0 7 AC- cos phi 0.4 Pulse (. / 50 us / Dielectric strength (V rms, minute) Contact / coil 4 kv /.5 kv Contact / contact 4 kv /.5 kv Contact open.5 kv / kv Cycles 0 6 pecifications Ambient temperature operation / storage -5 (no ice) +70 ºC / C Number of mechanical operations > 0 millions Pick-up time typ. 0 ms Release time typ. 5 ms Ingress protection rating IP40 35 g tandard types DC: 4, 48, 7, 0 V R7-A4/DC V R7-A8/DC V LED: R7-A4X/DC V R7-A8X/DC V Free wheeling diode: R7-A4D/DC V R7-A8D/DC V LED + free wheeling diode: R7-A4DX/DC V R7-A8DX/DC V "..." Enter the voltage for full type designation Fig. DC load limit curve 0 8 DC- 6 L/R 40 ms witching current [A] Voltage [V] Accessories ocket: C A 6 8 B 4.75 ee table on page Railway/0a. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.

11 Miniature relays R7-T 8-pin plug-in miniature relay, -pole, change-over twin contacts Type: R7-Tx/ V Relays for Railway application, change-over twin contacts Relays Maximum contact load 6 A / 50 V AC-, 6 A / 30 V DC- Recommended minimum contact load 5 ma / 5 V Code ma / 5 V Code Contacts Material tandard Code AgNi + 0.µ Au Optional Code AgNi + 0µ Au Rated current 6 A Inrush current max. (0 ms) 5 A witching voltage AC- max. 50 V AC load max. see Fig. DC load max. see Fig A(+) Coil (Values are valid at 0 C) Coil resistance see table; tolerance ± 0 % Operating voltage range U N Nominal power. W 5 6 A 8 Coil Table V DC Ω ±0% ma Fig. AC voltage endurance 0 7 AC- Pulse (. / 50 us / Dielectric strength (V rms, minute) Contact / coil 4 kv /.5 kv Contact / contact 4 kv /.5 kv Contact open.5 kv / kv Cycles 0 6 pecifications Ambient temperature operation / storage -5 (no ice) +70 ºC / C Number of mechanical operations > 0 millions Pick-up time typ. 0 ms Release time typ. 5 ms Ingress protection rating IP40 35 g tandard types DC: 4, 48, 7, 0 V R7-T/DC V R7-T/DC V LED: R7-TX/DC V R7-TX/DC V Free wheeling diode: R7-TD/DC V R7-TD/DC V LED + free wheeling diode: R7-TDX/DC V R7-TDX/DC V "..." Enter the voltage for full type designation Fig. DC load limit curve witching current [A] DC- L/R 40 ms Voltage [V] Accessories ocket: C A 6 8 B 4.75 ee table on page 53. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice. Railway/0a. 9

12 Interface relays 6. mm CINT- Interface module with mechanical change-over output contact, DIN rail mounting Types: CINT-/ V tandard interface module, change-over contact Cage clamp terminal Control voltage UC 4 V, 50/60 Hz Green LED for status indication Max. contact load 6 A / 50 V AC- Contact Data Type micro disconnection Material AgnO Rated current 6 A Inrush current max. (5 ms) 30 A witching voltage AC- max. 50 V AC load max. 500 VA DC load max. see Fig. Recommended min. contact load 0 ma / V Control input V n = Operating voltage range Typical input current Nominal power consumption UC 4 V V ma 60 mw Pulse (. / 50 us / Dielectric strength (V rms, minute) Contact / coil 6 kv / 4 kv Contact open.5 kv / kv RELAY A 4 A OCKET Fig. AC voltage endurance AC- General pecifications Ambient temperature operation / storage C / C Typical response V n 5 ms Typical release V n 0 ms ervice life mech. / elec. 0 7 / 0 5 operations Cond. cross section cage clamp terminal stranded wire mm Ingress protection rating IP 0 Mounting position any Housing material Polyamid tandard types UC 4 (AC/DC): CINT-/UC4V Cycles Fig. DC load limit curve 6 5 witching current [A] DC- Accessories Plug-in bridges: Label plate: Replacement relay for CINT-: CINT-BR0 ( x 0 pin) CINT-BEZ/64 (64 pieces) CINT-R/DC4V Voltage [V] Connector bridge CINT-BR0 4 93,5 44,3 49, T35 Label included CINT-BR8 A A 6, 3,4 73 ee table on page Railway/0a. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.

13 Interface relays 6. mm CINT- Interface module with mechanical change-over output contact, DIN rail mounting Types: CINT-/UC4V tandard interface module, change-over contact Cage clamp terminal Control voltage UC 4 V, 50/60 Hz Green LED for status indication Max. contact load 6 A / 50 V AC- Relays Contact Data Type micro disconnection Material AgNi +5μAu Rated current 6 A Inrush current max. (0 ms) 0 A witching voltage AC- max. 50 V AC load max. 500 VA DC load max. see Fig. Recommended min. contact load ma / V Control input V n = Operating voltage range Typical input current Nominal power consumption UC 4 V V ma 60 mw Pulse (. / 50 us / Dielectric strength (V rms, minute) Contact / coil 6 kv / 4 kv Contact open.5 kv / kv General pecifications Ambient temperature operation / storage C / C Typical response V n 5 ms Typical release V n 0 ms ervice life mech. / elec. 0 7 / 0 5 operations Cond. cross section cage clamp terminal stranded wire mm Ingress protection rating IP 0 Mounting position any Housing material Polyamid tandard types UC 4 (AC/DC): CINT-/UC4V Cycles A A RELAY OCKET Fig. AC voltage endurance Fig. DC load limit curve 6 5 witching current [A] 4 AC- DC- Accessories Plug-in bridges: Label plate: Replacement relay for CINT-: CINT-BR0 ( x 0 pin) CINT-BEZ/64 (64 pieces) CINT-R/DC4V Voltage [V] Connector bridge CINT-BR0 4 93,5 44,3 49, T35 Label included CINT-BR8 A A 6, 3,4 73 ee table on page 53. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice. Railway/0a.

14 Interface relays 6. mm CINT-5 Interface module with solide state DC output, DIN rail mounting Types: CINT-5/UC4V tandard interface module, olide state DC Cage clamp terminal Control voltage UC 4 V, 50/60 Hz Green LED for status indication Max. contact load A / 4 V DC- Contact Data Type Material Rated current Inrush current max. (0 ms) witching voltage DC- max. DC load max. Recommended min. contact load micro disconnection olide state A 0 A 30 V 48 W ma, 6 V RELAY (+) Control input V n = Operating voltage range Typical input current Nominal power consumption UC 4 V V ma 60 mw A A OCKET 4 Pulse (. / 50 us / Dielectric strength (V rms, minute) Input / output /.5 kv General pecifications Ambient temperature operation / storage C / C Typical response V n ms Typical release V n ms Cond. cross section cage clamp terminal stranded wire mm Ingress protection rating IP 0 Mounting position any Housing material Polyamid tandard types UC 4 (AC/DC): Accessories Plug-in bridges: Label plate: Replacement relay for CINT-5: CINT-5/UC4V CINT-BR0 ( x 0 pin) CINT-BEZ/64 (64 pieces) CINT-R5/DC4V Connector bridge CINT-BR0 4 93,5 44,3 49, T35 Label included CINT-BR8 A A 6, 3,4 73 ee table on page 53. Railway/0a. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.

15 Interface relays 4 mm CINT-6 Interface module with mechanical change-over output contact, DIN rail mounting Types: CINT-6/UC4V tandard interface module, change-over contact Cage clamp terminal Control voltage UC 4 V, 50/60 Hz Green LED for status indication Max. contact load 0 A / 50 V AC- Relays Contact Data Type micro disconnection Material AgnO Rated current 0 A / (6 A*) Inrush current max. (5 ms) 80 A witching voltage AC- max. 50 V AC load max VA DC load max. see Fig. Recommended min. contact load 0 ma, 4 V * For currents > 0 A, contact terminals must be connected in parallel ( with, 4 with 4, with ) Control input V n = UC 4 V Operating voltage range V Typical input current 0 ma Nominal power consumption 480 mw Pulse (. / 50 us / Dielectric strength (V rms, minute) Contact / coil 6 kv / 4 kv Contact open.5 kv / kv General pecifications Ambient temperature operation / storage C / C Typical response V n 5 ms Typical release V n 0 ms ervice life mech. / elec. 0 7 / 0 5 operations Cond. cross section cage clamp terminal stranded wire mm Ingress protection rating IP 0 Mounting position any Housing material Polyamid tandard types UC 4 (AC/DC): CINT-6/UC4V Accessories Plug-in bridges: CINT-BR8/5 (5 pieces x 8 pin) Label plate: CINT5-BEZ/8 (8 pieces) Replacement relay for CINT-6: CINT-R/DC4V Cycles A A OCKET RELAY 4 Fig. AC voltage endurance Fig. DC load limit curve AC witching current [A] DC- NC COM 4 NO 4 RELAY 93 T Voltage [V] VU 45 A A 4 3,4 7 ee table on page 53. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice. Railway/0a. 3

16 Interface relays 4 mm CINT-6 Interface module with mechanical change-over output contacts, DIN rail mounting Types: CINT-6/UC4V tandard interface module, change-over contact Cage clamp terminal Control voltage UC 4 V, 50/60 Hz Green LED for status indication Max. contact load 8 A / 50 V AC- Contact Data Type micro disconnection Material AgNi +5μAu Rated current 8 A Inrush current max. (0 ms) 5 A witching voltage AC- max. 50 V AC load max. 000 VA DC load max. see Fig. Recommended min. contact load 5 ma / 5 V Control input V n = Operating voltage range Typical input current Nominal power consumption UC 4 V V 0 ma 480 mw Pulse (. / 50 us / Dielectric strength (V rms, minute) Contact / coil 6 kv / 4 kv Contact / contact 4 kv / kv Contact open.5 kv / kv General pecifications Ambient temperature operation / storage C / C Typical response V n 5 ms Typical release V n 0 ms ervice life mech. / elec. 0 7 / 0 5 operations Cond. cross section spring cage stranded wire mm Ingress protection rating IP 0 Mounting position any Housing material Polyamid tandard types UC 4 (AC/DC): Accessories Plug-in bridges: Label plate: Replacement relay for CINT-6: CINT-6/UC4V CINT-BR8/5 (5 pieces x 8 pin) CINT5-BEZ/8 (8 pieces) CINT-R/DC4V Cycles A A OCKET RELAY 4 Fig. AC voltage endurance Fig. DC load limit curve AC witching current [A] DC Voltage [V] NC COM 4 NO 4 RELAY 93 T VU 45 A A 4 3,4 7 ee table on page Railway/0a. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.

17 Interface relays 4 mm CINT-63 Interface module with mechanical change-over output contacts, DIN rail mounting Types: CINT-63/UC4V tandard interface module, change-over contact Cage clamp terminal Control voltage UC 4 V, 50/60 Hz Green LED for status indication Max. contact load 8 A / 50 V AC- Relays Contact Data Type micro disconnection Material AgNi Rated current 8 A Inrush current max. (0 ms) 5 A witching voltage AC- max. 50 V AC load max. 000 VA DC load max. see Fig. Recommended min. contact load 0 ma / 4 V Control input V n = Operating voltage range Typical input current Nominal power consumption UC 4 V V 0 ma 480 mw Pulse (. / 50 us / Dielectric strength (V rms, minute) Contact / coil 6 kv / 4 kv Contact / contact 4 kv / kv Contact open.5 kv / kv General pecifications Ambient temperature operation / storage C / C Typical response V n 5 ms Typical release V n 0 ms ervice life mech. / elec. 0 7 / 0 5 operations Cond. cross section cage clamp terminal stranded wire mm Ingress protection rating IP 0 Mounting position any Housing material Polyamid tandard types UC 4 (AC/DC): Accessories Plug-in bridges: Label plate: Replacement relay for CINT-63: CINT-63/UC4V CINT-BR8/5 (5 pieces x 8 pin) CINT5-BEZ/8 (8 pieces) CINT-R3/DC4V Cycles A A OCKET RELAY 4 Fig. AC voltage endurance Fig. DC load limit curve AC witching current [A] DC Voltage [V] NC COM 4 NO 4 RELAY 93 T VU 45 A A 4 3,4 7 ee table on page 53. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice. Railway/0a. 5

18 ignal relays C03.06R Interface module with mechanical change-over twin contacts, DIN rail mounting Types: 03.06R/ V tandard interface module, separate change-over contacts crew terminals Control voltage UC 4 or 36 V, 50/60 Hz LED status indicator for each channel ealed relays built in Also suitable for panel mounting x M4 Max. contact load A / 30 V DC- Contact Data Type twin contacts Material Ag +Au Rated current A witching voltage AC- max. 5 V AC load max. 00 VA DC load max. see Fig. Recommended min. contact load 0 μa / 0 mv Control input V n = UC 4 V UC 36 V Operating voltage range V V Typical input current 8 ma 9 ma Nominal power consumption (per channel) 0 mw 330 mw A A A 4 4 Fig. DC voltage endurance Contact / Coil.5 kvrms minute 0 6 DC- 30V General pecifications Ambient temperature operation / storage C / C Typical response V n 0 ms Typical release V n 0 ms ervice life mech. / elec. 0 7 / 0 5 operations Cond. cross section screw terminal stranded wire.5 mm, x.5 mm Ingress protection rating IP 0 Max. screw torque 0.4 Nm Mounting position any Housing material Lexan 80 g tandard types UC (AC DC): 4, 36 V " " Enter the voltage for full type designation Accessories Label plate: C03.06R/UC V BZ-DIN witching current [A] Fig. DC load limit curve DC Voltage [V] LABEL 75 T 35 Cycles,5 4, 7, ee table on page Railway/0a. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.

19 Power relays RIC0-0 A, AC/DC control voltage, silent operation, DIN rail mounting according to DIN Type: RIC0-xxx/ V Hum-free installation contactor, contacts, NO, NO- NC, NC types available Relays Rated operational power 4 kw / 30 V AC-, 0.5 A / 0 V DC- Recommended minimum contact load 0 ma / 4 V Contacts Material AgNi Rated current 0 A Inrush current max. (00 ms) 50 A witching voltage AC- max. 400 V AC load max. AC-, AC-7a 4 kw / 30 V AC-3.3 kw /30 V (NO contact only) DC load max. see Fig. Control input V n = UC 4 V UC 36 V UC 30 V Operating voltage range [V] Typ. pic up voltage [V] Typ. release voltage [V] 7 70 Power consumption [W] Inductive turn-off voltage None None None urge immunity EN kv kv kv Rated insulation voltage Rated impulse withstand voltage Min. clearance of open contact 30 V 4 kv 3.6 mm A 3 A 4 x NO RIC0-00 Coil circuit A A A R A R x NO + x NC RIC0-0 U R A R3 R A R4 x NC RIC0-00 General pecifications Ambient temperature storage C operation, pacer after contactors side by side C operation, pacer after 3 contactors side by side C Pick-up time 5 45 ms Release time 0 50 ms Mechanical life 3 x 0 6 operations AC voltage endurance at rated load AC-3, AC-7b 3 x 0 5 operations DC voltage endurance at rated load DC- 0 5 operations Operating frequency at rated load DC- 300 operations / h Operating frequency at rated load AC- 600 operations / h Conductor cross section coil /contacts tranded wire.5 mm / 6 mm Max. crew torque coil / contacts 0.6 Nm /. Nm Ingress protection rating IP 0 40 g tandard types UC (AC/DC) 50/60 Hz: 4, 36, 30 V NO: RIC0-00/UC V NO + NC: RIC0-0/UC V " " Enter the voltage for full type designation NC: RIC0-00/UC V Fig. DC load limit curve DC DC- DC-3 DC Voltage [V] Accessories Auxiliary contact bloc: RIC-AUX RIC5, 40, 63 ealing cover: RIC-EAL0 pacer: RIC-DIT 85 T35 *Option: ealing cover Type: RIC-EAL0 45 amples of lamp loads Number of lamps Incandescent lamps 30 V / 00 W 0 Fluorescent lamps not corrected 30 V / 36 W 7 Fluorescent lamps electronic ballast units 36 W 5.5* 7, (45.5*) 6.5 Mounting information If multiple contactors are mounted side by side, spacers (RIC DIT) have to be inserted for the purpose of heat dissipation. Example: Ambient temperature up to 40 C: spacer after 3 RIC // C: spacer after RIC. ee table on page 53. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice. Railway/0a. 7

20 Power relays RIC5-5 A, AC/DC control voltage, silent operation DIN Rail mounting according to DIN Type: RIC5-xxx/ V Hum-free installation contactor, 4 contacts, 4 NO, 4 NC, NO- NC types available Rated operational power AC- Recommended minimum contact load ingle phase: 5.4 kw/30 V, 0.5 A/0 V DC- 3 phase 30 V: 9 kw 3 phase 400 V: 6 kw 0 ma / 4 V Contacts Material AgNi Rated current 5 A Inrush current max. (00 ms) 50 A witching voltage AC- max. 400 V AC load max. AC-, AC-7a 4 kw / 30 V AC-3. kw /30 V, 4 kw / 400 V DC load max. see Fig. 3 A 5 7 R R3 A R5 R7 Control input V n = UC 4 V UC 36 V UC 30 V Operating voltage range [V] Typ. pic up voltage [V] Typ. release voltage [V] 7 70 Power consumption [W] Inductive turn-off voltage None None None urge immunity EN kv kv kv Rated insulation voltage Rated impulse withstand voltage Min. clearance of open contact 440 V 4 KV 3.6 mm General pecifications Ambient temperature storage C operation, pacer after contactors side by side C operation, pacer after 3 contactors side by side C Pick-up time 5 45 ms Release time 0 70 ms Mechanical life 3 x 0 6 operations AC voltage endurance at rated load AC-3, AC-7b 5 x 0 5 operations DC voltage endurance at rated load DC- 0 5 operations Operating frequency at rated load DC- 300 operations / h Operating frequency at rated load AC-, AC operations / h Conductor cross section coil / contacts terminals tranded wire.5 mm / 6 mm Max. crew torque coil / contacts 0.6 Nm /. Nm Ingress protection rating IP 0 70 g 4 A 6 8 4x NO: RIC5-400 R A R4 4 x NO + x NC: RIC5-0 R A R3 3 Coil circuit Fig. DC load limit curve DC A A U R R4 A R6 R8 4x NC: RIC5-040 DC- DC-3 DC Voltage [V] tandard types UC (AC/DC) 50/60 Hz: 4, 36, 30 V 4NO: RIC5-400/UC V NO + NC: RIC5-0/UC V " " Enter the voltage for full type designation 4NC: RIC5-040/UC V Accessories Auxillary contact bloc: RIC-AUX ealing cover: RIC-EAL5 pacer: RIC-DIT 85 T35 *Option: ealing cover Type: RIC-EAL5 45 amples of lamp loads Number of lamps Incandescent lamps 30 V/ 00 W 0 Fluorescent lamps not corrected 30 V/ 36 W 0 Fluorescent lamps electronic ballast units 36 W * 44 (45.5*) 6.5 Mounting information If multiple contactors are mounted side by side, spacers (RIC DIT) have to be inserted for the purpose of heat dissipation. Example: Ambient temperature up to 40 C: spacer after 3 RIC // C: spacer after RIC. ee table on page Railway/0a. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.

21 . Time Relays Time Relays TF-60 etting of long times The TF60 time setting methode permits short examination of long delay time settings. Elapsing times of hours can be monitored in the sec. range. Example for a delay time of 38h:. et range switch to 60sec. et 38sec on the potentiometer (e.g. check 38sec by chronometer) 3. et range switch to 60h The delay time now amounts to 38h. Application Types Functions* t min. max. Output contacts Design Time relay with mechanical CO output contact CIMR E, A, W, N, K, B, B,, L 50 ms 60 h 6 A 50 V Time relay with AC solide-state output CIMR E, A, W, N, K, B, B,, L 50 ms 60 h A 50 V Time relay with DC solide-state output CIM3R E, A, W, N, K, B, B,, L 50 ms 60 h 5 A 4 VD Time relay with mechanical CO output contact CIMR E, A, L, M, B, G, H 50 ms 60 h 6 A 50 V Time relay with AC solide-state output CIMR E, A, L, M, B, G, H 50 ms 60 h A 50V Time relay with AC solide-state output CIM3R E, A, L, M, B, G, H 50 ms 60 h 5A 4VD Time relay with mechanical CO output contact CIM3R F, Q, G, H, I, P 50 ms 60 h 6A 50V Time relay with AC solide-state output CIM3R F, Q, G, H, I, P 50 ms 60 h A 50V Time relay with DC solide-state output CIM33R F, Q, G, H, I, P 50 ms 60 h 5 A 4 VD Modular time relay with power CO output contacts CT3.3 E, A, W, N, K, B, B 0.5 s 60 min 0 A Modular time relay with 3 twin CO output contacts CT3.3 E, A, W, N, K, B, B 0.5 s 60 min 6 A Modular time relay with power CO output contacts CT33.3 E, A, F, W, N, Q, K, L, B, B, G, H 30 ms 60 h 0 A Modular time relay with 3 twin CO output contacts CT33.3 E, A, F, W, N, Q, K, L, B, B, G, H 30 ms 60 h 6 A Modular time relay with power CO output contacts CT36.3 I, P x 50 ms 60 h 0 A Modular time relay with 3 twin CO output contacts CT36.3 I, P x 50 ms 60 h 6 A *Function diagrams: refer to page 0 This issue replaces all previous issues. Availability, errors and specifications subject to change without notice. Railway/0a. 9

22 Time functions Delay functions hot timing modes E On delay t R R on with delay OFF R off W One shot leading edge t R R on for t OFF R off (pulse clipping) A Off delay t R R on OFF R off with delay N One shot trailing edge t R OFF R on for t on for t R off F On and off delay t t R R on with delay (t) OFF R off with delay (t) O One shot leading and trailing edge t t R R on for t OFF R on for t OFF off for t R off Puls shaping Blinker functions K Puls shaping t R (pulse or continuous contact) R on for t no influence on R and t B Blinker, pulse start t t t R R on/off periodically according to t OFF R off L Pulse shaping, retrigger (subsequ.time operation from 0) t R (pulse or continuous contact) R on for t on for t = treet B Blinker, pulse start, trailing pulse R on/off periodically according to t t OFF: last pulse = t t t R M Puls shaping t R OFF R on for t no influence on R and t B Blinker, interval start t t t R R after t on/off periodically according to t OFF R off Delayed pulse G On delay single shot t t R (pulse or continuous contact) R after t on for t no influence on R and t Repeat cycle timer I Repeat cycle timer, pulse start t t t R R on/off periodically according to t and t OFF R off H On delay single shot t t R R after t on for t OFF R off P Repeat cycle timer, interval start C55, CT: t t R after t (t) on/off periodically according to t and t t t t OFF R off R pecial functions pecial functions Y tar-delta timer t t on for t OFF on with delay for t - OFF off tep-on /tep-off switch R R on/off X Restart delay t t R R on OFF R off and starts t R restart only after t L tep-switching (staircase lighting timer), with time lapse t t R R on and starts t on for t R off top/reset t TOP t REET TOP interrupts t (t-addition) REET reset t t restarts immediately T t is stopped R on/off Test = Triggering R = Output circuit = switches ON OFF 0 Railway/0a. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.

23 Multifunction Timer, DIN Rail mounting CIMR Time relay with mechanical change-over output contact 8 time functions + stepping function, ON-OFF switch, 50 ms 60 h Type: CIMR/UC4-40V ophisticated multifunction time relay, change-over power contact with zero crossing switching (50/60 Hz), 8 time functions, stepping function and service function ON/OFF, time ranges: 50 ms 60 h, multifunction LED state indicator, suitable for any time-control application and also staircase lighting, Light-switch neon lamp current absorption on input B, Manual switching function for maintenance, emergency, etc., 6.6 Hz power supply applications. Railway version available. Maximum contact load Recommended minimum contact load 6 A / 50 V AC- 0 ma / 0 V Time functions and related connection diagrams (Function diagrams: refer to page 0) The functions are selectable by rotary switch E A K N B L B W A A A B A A B A LED function table: LED Relay Time run OFF OFF NO Continuous ON ON NO hort blinking OFF YE Long blinking ON YE Time data 7 partial time ranges, t max (rotary switch) 0.6, 6, 60 s / 6, 60 min / 6, 60 h Fine adjustment range (rotary knob) t min t max, Time range tolerance t min : -5 % +0 % / t max : -0 % +5 % Repetition accuracy ± 0. % or DC: ms / AC: 0 ms Response time, power on, on A 45 ms Min. trigger pulse on B 0 ms (AC / DC) Reset time B (AC/DC) 40 ms Voltage failure buffering (50 / 60 Hz) 0 ms Fig. AC voltage endurance 0 7 Cycles 0 6 AC- Time Relays Contacts Type AgNi / CO, micro disconnection Rated operational current at 40 C / 60 C 6 A / 3 A Max. inrush current (0 ms) 30 A Max. switching voltage AC- 50 V Max. AC load AC- (Fig.) 4 kva Max. DC load DC- see Fig. Power supply- and control input Nominal voltage (A, B) UC 4-40 V (UC = AC/DC) Operating voltage range UC V Power consumption approx. 0.5 W Frequency range 6 63 Hz Allowed DC residual current into B 0.5 ma AC Neon lamp residual current into B 0 ma Trigger threshold voltage on B, AC / DC 3 / 5 V Fig. DC load limit curve witching current [A] DC- Test voltage open contact Test voltage between contacts and control input kvrms minute.5 kvrms minute Voltage [V] General pecifications Ambient temperature storage / operation C / C Mechanical life of contact 30 x 0 6 operations Conductor cross section tranded wire.5 mm, x.5 mm Ingress protection rating IP 0 Max. crew torque 0.4 Nm Housing material Lexan 70 g 75 T tandard types UC (AC/DC) 5 60 Hz CIMR/UC4-40V 4, 7,5, ee table on page 53. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice. Railway/0a.

24 Multifunction Timer, DIN Rail mounting CIMR Time relay with AC solid-state output 8 time functions and stepping function, ON-OFF switch, 50 ms 60 h Type: CIMRR/UC4-40V ophisticated multifunction time relay, triac output, suitable for high frequency of operations and inductive loads, 8 time functions, stepping function and service function ON/OFF, time ranges: 50 ms 60 h, multifunction LED state indicator, suitable for any time-control application and also staircase lighting, Light-switch neon lamp current absorption on input B, manual switching function for maintenance, emergency, etc., 6.6 Hz applications. Railway version available. Maximum contact load Minimum contact load A / 50 V 50 ma Time functions and related connection diagrams (Function diagrams: refer to page 0) The functions are selectable by rotary switch E A K N B L B W A A A B A A B A LED function table: LED Relay Time run OFF OFF NO Continuous ON ON NO hort blinking OFF YE Long blinking ON YE TRIAC Time data 7 partial time ranges, t max (rotary switch) 0.6, 6, 60 s / 6, 60 min / 6, 60 h Fine adjustment range (rotary knob) t min t max, Time range tolerance t min : -5 % +0 % / t max : -0 % +5 % Repetition accuracy ± 0. % or DC: ms / AC: 0 ms Response time, power on, on A 45 ms Min. trigger pulse on B 0 ms (AC / DC) Reset time B (AC/DC) 40 ms Voltage failure buffering (50 / 60 Hz) 0 ms Output Type Rated operational current at 40 C (Fig.) Max. inrush current (0 ms) Max. switching voltage Max. AC load AC- I t value Leakage current Triac, zero crossing A 00 A 50 V 300 VA 78 A s < ma Fig. Output derating curve Temperature [ C] Power supply- and control input Nominal voltage Operating voltage range Power consumption Frequency range Allowed DC residual current into B AC Neon lamp residual current into B Trigger threshold voltage on B, AC / DC Test voltage between output and control input UC 4-40 V (UC = AC/DC) UC V approx. 0.5 W 6 63 Hz 0.5 ma 0 ma 3 / 5 V.5 kvrms minute General pecifications Ambient temperature storage / operation C / C Conductor cross section tranded wire.5 mm, x.5 mm Ingress protection rating IP 0 Max. crew torque 0.4 Nm Housing material Lexan 70 g 75 T tandard types UC (AC/DC), 5 60 Hz CIMR/UC4-40V 4, 7,5, ee table on page 53. Railway/0a. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.

25 Multifunction Timer, DIN Rail mounting CIM3R Time relay with DC solid-state output 8 time functions and stepping function, ON-OFF switch, 50 ms 60 h Type: CIM3R/UC4-40V ophisticated multifunction time relay, transistor output, 8 time functions, stepping function and service function ON/OFF, time ranges from 50 ms 60 h, multifunction LED state indicator, suitable for any time-control application and also staircase-light control, light-switch neon lamp current absorption on input B, manual switching function for maintenance, emergency, etc., 6.6 Hz applications. Railway version available. Maximum contact load Recommended minimum contact load 5 A / 30 V ma Time functions and related connection diagrams (Function diagrams: refer to page 0) The functions are selectable by rotary switch E A K N B L B W A A A B A A B A LED function table: LED Relay Time run OFF OFF NO Continuous ON ON NO hort blinking OFF YE Long blinking ON YE Time data 7 partial time ranges, t max (rotary switch) 0.6, 6, 60 s / 6, 60 min / 6, 60 h Fine adjustment range (rotary knob) t min t max, Time range tolerance t min : -5 % +0 % / t max : -0 % +5 % Repetition accuracy ± 0. % or DC: ms / AC: 0 ms Response time, power on, on A 45 ms Min. trigger pulse on B 0 ms (AC / DC) Reset time B (AC/DC) 40 ms Voltage failure buffering (50 / 60 Hz) 0 ms Output Type MO FET Rated operational current at 40 C (Fig.) 5 A Max. inrush current (0 µs) 40 A Max. switching voltage 30 V Leakage current < 0 µa MOFET Fig. Output derating curve Temperature [ C] Time Relays Power supply- and control input Nominal voltage (UC = AC / DC) Operating voltage range Power consumption Frequency range Allowed DC residual current into B AC Neon lamp residual current into B Trigger threshold voltage on B, AC / DC Test voltage between output and control input UC 4-40 V (UC = AC/DC) UC V approx. 0.5 W 6 63 Hz 0.5 ma 0 ma 3 / 5 V.5 kvrms minute General pecifications Ambient temperature storage / operation C / C Conductor cross section tranded wire.5 mm, x.5 mm Ingress protection rating IP 0 Max. crew torque 0.4 Nm Housing material Lexan 70 g tandard types UC (AC/DC), 5 60 Hz CIM3R/UC4-40V 75 T , 7,5, ee table on page 53. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice. Railway/0a. 3

26 Multifunction Timer, DIN Rail mounting CIMR Time relay with mechanical change-over output contact 7 time functions and 7 time ranges from 50 ms 60 h Type: CIMR/UC4-40V ophisticated multifunction time relay, change-over power contact switching in zero crossing (50/60 Hz), 7 time functions and service function ON/OFF, 7 time ranges from 50 ms to 60 h, multifunction LED state indicator, suitable for any time-control application, light-switch neon lamp current absorption on input B, manual switching function for maintenance, emergency, etc., 6.6 Hz power supply applications. Railway version available. Maximum contact load Recommended minimum contact load 6 A / 50 V AC- 0 ma / 0 V Time functions and related connection diagrams (Function diagrams: refer to page 0) The functions are selectable by rotary switch E A L M G B H A A A B A A B A LED function table: LED Relay Time run OFF OFF NO Continuous ON ON NO hort blinking OFF YE Long blinking ON YE Time data 7 partial time ranges, t max (rotary switch) 0.6, 6, 60 s / 6, 60 min / 6, 60 h Fine adjustment range (rotary knob) t min t max, Time range tolerance t min : -5 % +0 % / t max : -0 % +5 % Repetition accuracy ± 0. % or DC: ms / AC: 0 ms Response time, power on, on A 45 ms Min. trigger pulse on B 0 ms (AC / DC) Reset time B (AC/DC) 40 ms Voltage failure buffering (50 / 60 Hz) 0 ms Cycles Fig. AC voltage endurance AC- Contacts Type AgNi / CO, micro disconnection Rated operational current at 40 C / 60 C 6 A / 3 A Max. inrush current (0 ms) 30 A Max. switching voltage AC- 50 V Max. AC load AC- (Fig.) 4 kva Max. DC load DC- see Fig. Power supply- and control input Nominal voltage (A, B) UC 4-40 V (UC = AC / DC) Operating voltage range UC V Power consumption approx. 0.5 W Frequency range 6 63 Hz Allowed DC residual current into B 0.5 ma AC Neon lamp residual current into B 0 ma Trigger threshold voltage on B, AC / DC 3 / 5 V Fig. DC load limit curve witching current [A] DC- Test voltage open contact Test voltage between contacts and control input kvrms minute.5 kvrms minute Voltage [V] General pecifications Ambient temperature storage / operation C / C Mechanical life of contact 30 x 0 6 operations Conductor cross section tranded wire.5 mm, x.5 mm Ingress protection rating IP 0 Max. crew torque 0.4 Nm Housing material Lexan 70 g 75 T tandard types UC (AC/DC) 5 60 Hz CIMR/UC4-40V 4, 7,5, ee table on page Railway/0a. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.

27 Multifunction Timer, DIN Rail mounting CIMR Time relay with AC solid-state output 7 time functions and 7 time ranges 50 ms 60 h Type: CIMR/UC4-40V ophisticated multifunction time relay, triac output, suitable for high frequency of operations and inductive loads, 7 time functions and service function ON/OFF, 7 time ranges from 50 ms 60 h, multifunction LED state indicator, suitable for any time-control application light-switch neon lamp current absorption on input B, manual switching function for maintenance, emergency, etc., 6.6 Hz applications. Railway version available. Maximum contact load Minimum contact load A / 50 V 50 ma Time functions and related connection diagrams (Function diagrams: refer to page 0) The functions are selectable by rotary switch E A L M G B H A A A B A A B A LED function table: LED Relay Time run OFF OFF NO Continuous ON ON NO hort blinking OFF YE Long blinking ON YE Time data 7 partial time ranges, t max (rotary switch) 0.6, 6, 60 s / 6, 60 min / 6, 60 h Fine adjustment range (rotary knob) t min t max, Time range tolerance t min : -5 % +0 % / t max : -0 % +5 % Repetition accuracy ± 0. % or DC: ms / AC: 0 ms Response time, power on, on A 45 ms Min. trigger pulse on B 0 ms (AC / DC) Reset time B (AC/DC) 40 ms Voltage failure buffering (50 / 60 Hz) 0 ms Output Type Rated operational current at 40 C (Fig.) Max. inrush current (0 ms) Max. switching voltage Max. AC load AC- I t value Leakage current Triac, zero crossing A 00 A 50 V 300 VA 78 A s < ma TRIAC Fig. Output derating curve Temperature [ C] Time Relays Power supply- and control input Nominal voltage Operating voltage range Power consumption Frequency range Allowed DC residual current into B AC Neon lamp residual current into B Trigger threshold voltage on B, AC / DC Test voltage between output and control input UC 4-40 V (UC = AC / DC) UC V approx. 0.5 W 6 63 Hz 0.5 ma 0 ma 3 / 5 V.5 kvrms minute General pecifications Ambient temperature storage / operation C / C Conductor cross section tranded wire.5 mm, x.5 mm Ingress protection rating IP 0 Max. crew torque 0.4 Nm Housing material Lexan 70 g 75 T tandard types UC (AC/DC), 5 60 Hz CIMR/UC4-40V 4, 7,5, ee table on page 53. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice. Railway/0a. 5

28 Multifunction Timer, DIN Rail mounting CIM3R Time relay with DC solid-state output 7 time functions and 7 time ranges from 50 ms 60 h Type: CIM3R/UC4-40V ophisticated multifunction time relay, transistor output, 7 time functions and service function ON/OFF, 7 time ranges from 50 ms 60 h, multifunction LED state indicator suitable for any time-control application, light-switch neon lamp current absorption on input B, manual switching function for maintenance, emergency, etc., 6.6 Hz applications. Railway version available. Maximum contact load Recommended minimum contact load 5 A / 30 V ma Time functions and related connection diagrams (Function diagrams: refer to page 0) The functions are selectable by rotary switch LED function table: E A L M G B H A A A B A A B A LED Relay Time run OFF OFF NO Continuous ON ON NO hort blinking OFF YE Long blinking ON YE Time data 7 partial time ranges, t max (rotary switch) 0.6, 6, 60 s / 6, 60 min / 6, 60 h Fine adjustment range (rotary knob) t min t max, Time range tolerance t min : -5 % +0 % / t max : -0 % +5 % Repetition accuracy ± 0. % or DC: ms / AC: 0 ms Response time, power on, on A 45 ms Min. trigger pulse on B 0 ms (AC / DC) Reset time B (AC/DC) 40 ms Voltage failure buffering (50 / 60 Hz) 0 ms Output Type MO FET Rated operational current at 40 C (Fig.)) 5 A Max. inrush current (0 µs) 40 A Max. switching voltage 30 V Leakage current < 0 µa MOFET Fig. Output derating curve Temperature [ C] Power supply- and control input Nominal voltage (UC = AC / DC) Operating voltage range Power consumption Frequency range Allowed DC residual current into B AC Neon lamp residual current into B Trigger threshold voltage on B, AC / DC Test voltage between output and control input UC 4-40 V (UC = AC / DC) UC V approx. 0.5 W 6 63 Hz 0.5 ma 0 ma 3 / 5 V.5 kvrms minute General pecifications Ambient temperature storage / operation C / C Conductor cross section tranded wire.5 mm, x.5 mm Ingress protection rating IP 0 Max. crew torque 0.4 Nm Housing material Lexan 70 g tandard types UC (AC/DC), 5 60 Hz CIM3R/UC4-40V 75 T , 7,5, ee table on page Railway/0a. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.

29 Multifunction Timer, DIN Rail mounting CIM3R Time relay with mechanical change-over output contact 6 time functions and service function, 7 time ranges from 50 ms 60 h Type: CIM3R/UC4-40V ophisticated multifunction time relay, change-over power contact switching in zero crossing (50/60 Hz), 6 time functions and service function ON/OFF, 7 time ranges from 50 ms to 60 h, multifunction LED state indicator, suitable for any time-control application, light-switch neon lamp current absorption on input B, manual switching function for maintenance, emergency, etc., 6.6 Hz power supply applications. Railway version available. Maximum contact load Recommended minimum contact load 6 A / 50 V AC- 0 ma / 0 V Time functions and related connection diagrams (Function diagrams: refer to page 0) The functions are selectable by rotary switch F Q G H I P A B A A B A LED function table: LED Relay Time run OFF OFF NO Continuous ON ON NO hort blinking OFF YE Long blinking ON YE Time data 7 partial time ranges, t max (rotary switch) 0.6, 6, 60 s / 6, 60 min / 6, 60 h Fine adjustment range (rotary knob) t min t max, Time range tolerance t min : -5 % +0 % / t max : -0 % +5 % Repetition accuracy ± 0. % or DC: ms / AC: 0 ms Response time, power on, on A 45 ms Min. trigger pulse on B 0 ms (AC / DC) Reset time B (AC/DC) 40 ms Voltage failure buffering (50 / 60 Hz) 0 ms Fig. AC voltage endurance 0 7 Cycles 0 6 AC- Time Relays Contacts Type AgNi / CO, micro disconnection Rated operational current at 40 C / 60 C 6 A / 3 A Max. inrush current (0 ms) 30 A Max. switching voltage AC- 50 V Max. AC load AC- (Fig.) 4 kva Max. DC load DC- see Fig. Power supply- and control input Nominal voltage (A, B) UC 4-40 V (UC = AC / DC) Operating voltage range UC V Power consumption approx. 0.5 W Frequency range 6 63 Hz Allowed DC residual current into B 0.5 ma AC Neon lamp residual current into B 0 ma Trigger threshold voltage on B, AC / DC 3 / 5 V Fig. DC load limit curve witching current [A] DC- Test voltage open contact Test voltage between contacts and control input kvrms minute.5 kvrms minute Voltage [V] General pecifications Ambient temperature storage / operation C / C Mechanical life of contact 30 x 0 6 operations Conductor cross section tranded wire.5 mm, x.5 mm Ingress protection rating IP 0 Max. crew torque 0.4 Nm Housing material Lexan 70 g 75 T tandard types UC (AC/DC) 5 60 Hz CIM3R/UC4-40V 4, 7,5, ee table on page 53. This issue replaces all previous issues. Availability, errors and specifications subject to change without notice. Railway/0a. 7