Insulation coordination (EN ) Standards EN Note 24 V DC / 24 V DC 0,1 A. 230 V AC ±10% Power rating 24 V DC ±20 % 140 mw
|
|
|
- Merry Fleming
- 6 years ago
- Views:
Transcription
1 Optos - MIROSERIES MOS / MOZ 3 48 V D / 0.1 A Universal interface between control and sensor/actuator Plug-in cross-connection ZQV 4N Interchangeable solid-state relay 6.1 mm wide Screw or tension clamp connection For mounting on TS 35 (24 V D) (120 V U) 3 48 V D 0.1 A 1 V Leakage current 1 ma no/integrated free-wheel diode Ambient temperature (operational) Storage temperature E; culus; Standards EN V 4.0 kv learance and creepage distances for control/load side 5.5 mm III Pollution severity 2 (230 V A) lamping range (rating- / min. / max.) mm / 0.5 / / 0.5 / 2.5 Length x width x height mm 93 / 6.1 / / 6.1 / 91 ross-connectors and markers - refer to MIROSERIES accessories 5 V D / 24 V D 0.1 A 24 V D / 24 V D 0,1 A 120 V U / 24 V D 0,1 A 230 V A / 24 V D 0,1 A 5 V D ±20% 24 V D ±20 % 120 V U + 10 %/ -15 % 230 V A ±10% 55 mw ±10 % 140 mw 340 mw / 0.4 VA 1.7 VA 10 Hz 300 Hz D: 10 Hz /A: 3 Hz 3 Hz Switch-on delay < 6,5 ms 35µs < 6.5 ms < 6.5 ms Switch-off delay < 10 ms 355µs < 10 ms < 10 ms omplete module MOS 5Vdc / 24Vdc 0,1A MOS 24Vdc / 24Vdc 0.1A MOS 120Vuc / 24Vdc 0.1A MOS 230Vac / 24Vdc 0.1A MOZ 5Vdc / 24Vdc 0.1A MOZ 24Vdc / 24Vdc 0,1A MOZ 120Vuc / 24Vdc 0.1A MOZ 230Vac / 24Vdc 0.1A Spare relay, pluggable SSS Relais 5V/24V 0,1AD SSS Relais 24V/24V 0,1Adc SSS Relais 60V/24V 0,1Adc SSS Relais 24V/24V 0,1Adc
2 Optos - MIROSERIES MOS / MOZ V A / 1 A Universal interface between control and sensor/actuator Plug-in cross-connection ZQV 4N Interchangeable solid-state relay 6.1 mm wide Screw or tension clamp connection For mounting on TS 35 (24 V D) (120 V U) V A 1 A approx. 1.6 V Leakage current 20 µa no/integrated free-wheel diode Ambient temperature (operational) Storage temperature E; culus; Standards EN V 4.0 kv learance and creepage distances for control/load side 5.5 mm III Pollution severity 2 (230 V A) lamping range (rating- / min. / max.) mm / 0.5 / / 0.5 / 2.5 Length x width x height mm 93 / 6.1 / / 6.1 / 91 ross-connectors and markers - refer to MIROSERIES accessories 24 V D / 230 V A 1 A 120 V U / 230 V A 1 A 230 V A / 230 V A 1 A 24 V D ±20 % 120 V U + 10 %/ -15 % 230 V U ±10 % 250 mw ± 15 % 0.4 VA ±15% 1,7 VA ± 20% 3 Hz 3 Hz 3 Hz Switch-on delay < 11 ms < 11 ms < 20 ms Switch-off delay < 11 ms < 11 ms < 20 ms omplete module MOS 24Vdc/ 230VA 1A MOS 120Vuc / 230VA 1A MOS 230Vuc/ 230Vac 1A MOZ 24Vdc/ 230VA 1A MOZ 120Vuc / 230VA 1A MOZ 230Vuc/ 230VA 1A Spare relay, pluggable SSS Relais 24V/230V 1Aac SSS Relais 60V/230V 1Aac SSS Relais 24V/230V 1Aac
3 Optos - MIROSERIES MOS / MOZ 3 33 V D / 2 A Universal interface between control and sensor/actuator Plug-in cross-connection ZQV 4N Interchangeable solid-state relay 6.1 mm wide Screw or tension clamp connection For mounting on TS 35 (24 V D) (120 V U) 3 33 V D 2 A 120 mv Leakage current 1 ma no/integrated free-wheel diode Ambient temperature (operational) Storage temperature E; culus; Standards EN V 4.0 kv learance and creepage distances for control/load side 5.5 mm III Pollution severity 2 (230 V A) lamping range (rating- / min. / max.) mm / 0.5 / / 0.5 / 2.5 Length x width x height mm 93 / 6.1 / / 6.1 / 91 ross-connectors and markers - refer to MIROSERIES accessories 5 V D / 24 V D 2 A 24 V D / 24 V D 2 A 120 V U / 24 V D 2 A 230 V A / 24 V D 2 A 5 V D ±20% 24 V D ±20 % 120 V U + 10 %/ -15 % 230 V A ±10% 55 mw ±10 % 140 mw 340 mw / 0.4 VA 1.7 VA 300 Hz 300 Hz D: 10 Hz /A: 3 Hz 3 Hz Switch-on delay < 55 µs < 55 µs < 6.5 ms < 6.5 ms Switch-off delay < 1 ms < 1.2 ms < 10 ms < 10 ms omplete module MOS 5Vdc / 24Vdc 2A MOS 24Vdc / 24Vdc 2A MOS 120Vuc / 24Vdc 2A MOS 230Vac / 24Vdc 2A MOZ 5Vdc / 24Vdc 2A MOZ 24Vdc / 24Vdc 2A MOZ 120Vuc / 24Vdc 2A MOZ 230Vac / 24Vdc 2A Spare relay, pluggable SSS Relais 5V/24V 2AD SSS Relais 24V/24V 2Adc SSS Relais 60V/24V 2Adc SSS Relais 24V/24V 2Adc
4 Optos - MIROSERIES MOS / MOZ actuator version 3 33 V D / 2 A Universal interface between control and sensor/actuator Plug-in cross-connection ZQV 4N Interchangeable solid-state relay 6.1 mm wide Screw or tension clamp connection For mounting on TS V D actuator version: Bridgeable, potential-free connection of actuators on output V D 2 A 120 mv (24 V D) cc no/integrated free-wheel diode Ambient temperature (operational) Storage temperature E; culus; Standards EN V 4.0 kv learance and creepage distances for control/load side 5.5 mm III Pollution severity 2 lamping range (rating- / min. / max.) mm / 0.5 / / 0.5 / 2.5 Length x width x height mm 93 / 6.1 / / 6.1 / 91 ross-connectors and markers - refer to MIROSERIES accessories Switch-on delay Switch-off delay 24 V D AT 24 V D ±20 % 140 mw ±10 % < 55 µs < 1,2 ms omplete module MOS 24Vdc / 24Vdc AT MOZ 24Vdc / 24Vdc AT Spare relay, pluggable SSS Relais 24V/24V 2Adc
5 Optos MIROSERIES Plug-in solid-state relay SSS Relay Switching current 100 ma SSS Relay Switching current 2 A SSS Relay Switching current 1 A Input Nominal control voltage 24 V D 60 V D 24 V D 60 V D 24 V D 60 V D ontrol voltage min / max 16 V D / 30 V D 52 V D / 72 V D 18 V D / 30 V D 35 V D / 72 V D V D V D ontrol current at U IN = 24 V 7 ma ± 10 % 2.8 ma ± 10 % 7 ma ± 10 % 3.0 ma ± 10 % 3.1 ma ± 10 % 3.1 ma ± 10 % Drop-out voltage 10 V D 40 V D 10 V D 20 V D 20 V D 20 V D ontrol circuit resistance approx. 4 kω approx. 20 kω approx. 3,2 kω approx. 16 kω 20 kω 20 kω Output Bipolar transistor MOS-FET TRIA Switching voltage V D V D V A Switching/continuous current at U A > 5 V D 100 ma D 2 A D 1 A A onducting-state voltage < 1 V D < 120 mv D < 1 V A Insulation Test voltage between control/switching circuit 2.5 kv 2.5 kv 2.5 kv Other data Operating temperature range Storage temperature range Weight * Ambient temperature g { g { g { Wiring diagram A1 V V (11) A1 V V (11) A1 V V (11) A2 P (14) A2 P (14) A2 P (14) For further data, see also Nominal control voltage 5 V D SSS Relais 5 V/24 V 0,1 A D SSS Relais 5 V / 24 V 2 A D V D SSS Relais 24 V/24 V 0,1 A D SSS Relais 24 V/24 V 2 A D SSS Relais 24 V/230 V 1 A A V D SSS Relais 60 V/24 V 0,1 A D SSS Relais 60 V/24 V 2 A D SSS Relais 60 V/230 V 1 A A Printing details.110
6 Optos MIROSERIES Accessories MIROSERIES Plug-in cross-connection No. of poles Qty yellow ZQV 4N / 2 GE ZQV 4N / 3 GE ZQV 4N / 4 GE ZQV 4N / 10 GE ZQV 4N / red ZQV 4N / 2 RT ZQV 4N / 3 RT ZQV 4N / 4 RT ZQV 4N / 10 RT ZQV 4N / 20 RT blue ZQV 4N / 2 BL ZQV 4N / 3 BL ZQV 4N / 4 BL ZQV 4N / 10 BL ZQV 4N / 20 BL black ZQV 4N / 2 SW ZQV 4N / 3 SW ZQV 4N / 4 SW ZQV 4N / 10 SW ZQV 4N / 20 SW Tension clamp Screw onductor connection connection Solid H07V-U mm Stranded H07V-K mm f with wire end ferrules to DIN mm f with wire end ferrules with plastic collar mm Max. clamping range mm Plug gauge to IE size A 2 A 3 General technical data Nominal torque ontinuous current for 2-pole cross-connection A ontinuous current for multi-pole cross-connection A Stripping length mm 10 7 Ingress protection class IP 20 IP 20 Housing material Wemid Wemid UL 94 flammability rating V-0 V-0 Nominal current A 6 6 Nominal voltage V Other accessories Qty Base only MRZ 24VD 1O BASIS MRS 24VD 1O BASIS MRZ 120VU 1O BASIS MRS 120VU 1O BASIS MRZ 230VA 1O BASIS MRS 230VA 1O BASIS Markers WS 12/6 12 x 6 mm mm 92 mm Labels, Lasermark LM MT /6 ge 484 labels / sheet Screwdriver SD 0,6 x 3,5 x mm 6.1 mm 93 mm 6.1 mm.111
7 Optokoppler - MIROOPTO For high switching frequency up to 100kHz Only 6 mm width Pluggable cross-connection Mount onto TS V D 100 khz +24 V D 0 V A special interior circuit in the opto module MIROOPTO 100 khz ensures that rapidly transmitted signals are isolated from one another and that they can be transferred practically without delay. This allows switching frequencies up to 100 khz to be achieved. omprehensive suppressor circuits safeguard the module against conducted transients and voltage spikes V D 12 V D 28 V D For example rotational speed measurement W Making voltage b>nom Dropout voltage > 70 % U Nom < 12 V t voltage 100 khz ut frequency Status indicator Protective circuit polarity protection LED green icator Varistor, reverse polarity protection Sensor Solid-state type stor Bipolar transistor 24 V D switching voltage 50 ma l switching current 1,5 V drop at max. load Leakage current < 20 µa> ion no /Varistor, reverse polarity protection Switch-on delay/switch-off delay < 1 µs> /< 3 µs elay ontinuous current 50 ma ntinuous current Pulse loading, max. current/fuse 0.6 A (20 ms)/ max. current/fuse Load category L A category Ambient temperature (operational) Storage temperature ure (operational) ure Power supply UL 94 flammability class V-0 94 flammability class Humidity RH 5 95 % RH T u = 40, no condensation T u = 40, no condensation in preparation E; culus in preparation Standards IE 62314, UL508 EN 50178, IE 62314, UL kv impulse withstand voltage learance and creepage distances for control side - load side > 3 mm c and creepage distances for control side - load side Pollution severity lamping range (rating- / min. / max.) mm / 0.5 / 4 Length x width x height mm 90 x 6.1 x 98 onnection system Qty. MOS 12-28VD 100kHz ontrol Accessories.112
![Solid-state relay - MIROOPTO For D loads up to 300 V D and 1 A Only 6 mm width Plug-in cross-connection Power Boost: 20 A / 20 ms, 5 A / 1 sec 12 300 V D 1 A Load current I [A] 2,5 2,0 1,5 1,0 0,5](/docs-images/78/76984932/images/8-0.jpg "0,0 0 20 40 60 80 100 Ambient temperature T [ ] The solid-state relay MIROOPTO 300 V D has been developed as a switching amplifier for high inductive loads up to 300 V D and 1 A in motor brakes and")
8 Solid-state relay - MIROOPTO For D loads up to 300 V D and 1 A Only 6 mm width Plug-in cross-connection Power Boost: 20 A / 20 ms, 5 A / 1 sec V D 1 A Load current I [A] 2,5 2,0 1,5 1,0 0,5 0, Ambient temperature T [ ] The solid-state relay MIROOPTO 300 V D has been developed as a switching amplifier for high inductive loads up to 300 V D and 1 A in motor brakes and contactors. A power boost in the load circuit compensates transient overloads (20 A for 20 ms / 5 A for 1 s) such as making or breaking spikes. Additional protective circuits counter higher overloads. mn;20 % 24 V D ±20 % Example: motor brake 0.26 W ating Making voltage 19.6 V D ltage Dropout voltage < 12 V t voltage 100 Hz put frequency Status indicator LED green icator Protective circuit polarity protection Varistor, reverse polarity protection Solid-state type MOS-FET tate type V D ing voltage 1 A nal switching current < 1 V e drop at max. load Leakage current < 100 µa> varistor Powerboost 20 A / 20 ms, 5 A / 1 sec /varistor Switch-on delay/switch-off delay < 0.2 ms /< 0.3 ms tch-off delay ontinuous current 1 A ontinuous current Pulse loading, max. current/fuse 27 A (10 ms)/, max. current/fuse Load category L A category Ambient temperature (operational) ure (operational) Power supply Storage temperature ure UL 94 flammability class V-0 94 flammability class Humidity RH 5 95 % RH T u = 40, no condensation T u = 40, no condensation in preparation E; culus in preparation Standards IE 62314, UL508 EN 50178, IE 62314, UL kv impulse withstand voltage learance and creepage distances for control side - load side > 3 mm ce ad creepage distances for control side - load side Pollution severity lamping range (rating- / min. / max.) mm / 0.5 / 4 Length x width x height mm 90 x 6.1 x 98 onnection system Qty. MOS 24VD/12-300VD 1A ontrol Accessories.113
9 Solid-state relay - MIROOPTO For direct connection of actuators up to 24 V D, 2 A Only 6 mm width Pluggable cross-connection PE connection integrated in mounting rail Fault indication via LED 8 30 V D 2 A Load current I [A] Ambient temperature T [ ] A V D 0 V The solid-state relay MIROOPTO ATOR has been especially designed as a switching amplifier for actuators up to 24 V D and 2A with inductive loads such as solenoid valves and contactors. 3-wire actuators can be connected directly to the module. This is short-circuit proof and protected against application-related transients and spikes by extensive protective circuitry. mn;20 % 24 V D ±20 % Example: pneumatic valve 0.12 W ating Making voltage b>nom Dropout voltage Status indicator D rot, Status LED grün Protective circuit polarity protection > 70 % U Nom < 12 V t voltage 100 Hz put frequency Fault indication LED red, status LED green Varistor, reverse polarity protection bar Valve PE Solid-state type R MOS-FET Intelligent POWER MOS-FET 8 30 V D ching voltage 2 A nal switching current < 100 mv rop at max. load Leakage current < 100 µa yes (12 h) /varistor Protective circuit Switch-on delay/switch-off delay < 0.2 ms> /< 0.5 ms> h-off delay ontinuous current 2 A ontinuous current Pulse loading, max. current/fuse / ulse loading, max. current/fuse Load category L A category Ambient temperature (operational) Storage temperature ure (operational) ure Power supply UL 94 flammability class V-0 94 flammability class Humidity RH 5 95 % RH T u = 40, no condensation T u = 40, no condensation in preparation E; culus in preparation Standards IE 62314, UL508 EN 50178, IE 62314, UL kv impulse withstand voltage learance and creepage distances for control side - load side > 3 mm c and creepage distances for control side - load side Pollution severity lamping range (rating- / min. / max.) mm / 0.5 / 4 Length x width x height mm 90 x 6.1 x 98 onnection system Qty. PE MOS 24VD/8-30VD 2A ontrol Accessories.114
10 .115
11 Optos - PLUGSERIES POS / POZ Universal interface between control and sensor Plug-in cross-connection ZQV 2.5N Interchangeable solid-state relay Screw or tension spring connection For mounting on TS V D / 24 V D 2.5 A 24 V D / 24 V D 5 A A1 A A1 A Load * Load * Free wheel diode for inductive loads* Free wheel diode for inductive loads* V D Nominal auxiliary voltage Status indicator Switch-on delay/switch-off delay Ambient temperature (operational) Storage temperature Standards learance and creepage distances for control side - load side Pollution severity 15 V D 30 V D 250 mw ating no inal auxiliary voltage green LED icator 0 30 V D ching voltage 2.5 A l switching current 0,4 V drop at max. load 2ms /18ms delay/switch-off delay no /Integrated free-wheel diode ircuit ure (operational) re E;cURus; EN kv eff and voltage 8 mm ance nd creepage distances for control side - load side 15 V D 30 V D 250 mw ating no inal auxiliary voltage green LED icator 0 30 V D ching voltage 5 A nal switching current 0,3 V p at max. load 2ms /18ms delay/switch-off delay no /Integrated free-wheel diode ircuit ure (operational) re E;cURus; EN kv eff and voltage 8 mm anc and creepage distances for control side - load side lamping range (rating- / min. / max.) mm 2 Length x width x height mm 2.5 / 0.5 / / 0.5 / x 15.3 x x 15.3 x / 0.5 / / 0.5 / x 15.3 x x 15.3 x 87 onnection system Qty. Qty. POS 24VD/24VD 2A POS 24VD/24VD 5A POZ 24VD/24VD 2A POZ 24VD/24VD 5A Spare SSR Spare SSR Accessories ross-connectors and markers - see PLUGSERIES accessories ross-connectors and markers - see PLUGSERIES accessories.116
12 Optos - PLUGSERIES POS / POZ Universal interface between control and sensor Plug-in cross-connection ZQV 2.5N Interchangeable solid-state relay Screw or tension spring connection For mounting on TS V D / 230 V A 2 A 24 V D / 230 V A 4 A VA L1 N VA L1 N A1 A Load A1 A Load V D Nominal auxiliary voltage Status indicator Switch-on delay/switch-off delay Ambient temperature (operational) Storage temperature Standards learance and creepage distances for control side - load side Pollution severity 15 V D 30 V D 250 mw ating no inal auxiliary voltage green LED icator V A ing voltage 2 A nal switching current 1 V e drop at max. load 12ms /20ms elay/switch-off delay no /R element roof/protective circuit ure (operational) re E;cURus; EN kv eff and voltage 8 mm anceand creepage distances for control side - load side 15 V D 30 V D 250 mw ating no inal auxiliary voltage green LED icator V A ing voltage 3 A (4 A at 20 ) current 1,1 V drop at max. load 12ms /20ms elay/switch-off delay no /R element roof/protective circuit ure (operational) re E;cURus; EN kv eff and voltage 8 mm anceand creepage distances for control side - load side lamping range (rating- / min. / max.) mm 2 Length x width x height mm 2.5 / 0.5 / / 0.5 / x 15.3 x x 15.3 x / 0.5 / / 0.5 / x 15.3 x x 15.3 x 87 onnection system Qty. Qty. POS 24VD/230VA 2A POS 24VD/230VA 4A POZ 24VD/230VA 2A POZ 24VD/230VA 4A Spare SSR Spare SSR Accessories ross-connectors and markers - see PLUGSERIES accessories ross-connectors and markers - see PLUGSERIES accessories.117
Short-circuit-proof switching amplifier for inductive loads up to 10 A
MICROOPTO Overview Short-circuit-proof switching amplifier for inductive loads up to 10 Powerful, compact solid-state relay with error signalling contact The MICROOPTO family offers the customer high-quality
No-wear isolation of potentials in terminal block design
TERMOPTO Overview No-wear isolation of potentials in terminal block design Space saving solid-state relay with PUSH IN connection technology The TERMOPTO opto modules are characterised by a particularly
Opto Modules and Solid-State Relays. Product Information
Opto Modules and Solid-State Relays Product Information Opto Modules and Solid-State Relays Optos Overview Definition / mode of operation 4 Basic functions 6 Control / load circuit 7 Switching amplification
4. 2. Electronics Relays and Optos. Catalogue C A T A L O G U E
C A T A L O G U E 4. 011 01 Electronics Relays and Optos Catalogue Product Portfolio Weidmüller is a leading international provider of solutions for electrical connectivity, transmission and conditioning
Data sheet. W-Series WDU 4 BL
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
48 Series - Relay interface modules A. Features
Series - Relay interface modules 8-0 - 6 A Features & Pole relay interface modules, 5.8 mm wide. Ideal interface for PLC and electronic systems.3 - Pole 0 A.5 - Pole 8 A.6 - Pole 6 A coils or sensitive
38 Series - Relay interface modules A. Features /
Series - Relay interface modules 0.1-2 - 6-8 A Features 1 Pole - 6 A electromechanical relay interface modules, 6.2 mm wide. Ideal interface for PLC and electronic systems Sensitive DC coil or coil versions
38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
Type CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
60 Series - General purpose relays 6-10 A. Features Plug-in mount 10 A General purpose relay
Series - General purpose relays - 0 A Features Plug-in mount 0 A General purpose relay.. & pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listed (certain relay/socket
08/07/2015
17.5 mm - 1 Solid State Relay 0.7A MUS2 Part number 88827004 Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator (relay version) Possibility of external
Data sheet. W-Series WDU 2.5
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
Interface relays and optocouplers Product group picture
Interface relays and optocouplers Product group picture /1 ABB Catalog Electronic Products and Relays 2013/2014 2CDC 1 004 C0209 Interface relays and optocouplers Table of contents Interface Relays and
Data sheet. W-Series WDU 10
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
Data sheet. W-Series WDU 2.5 RT
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
41 Series - Low profile PCB relays 8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16
Data sheet... W-Series WDU 2.5
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
Relay interface modules A
4C SЕRIES Relay interface modules 8-10 - 16 A Escalators Road / tunnel lighting Hoists and cranes Carousel warehouses Control panels Panels for electrical distribution FINDER reserves the right to alter
62 Series - Power relays 16 A. Features / /
6 Series - Power relays 6 A Features 6. / 6.3 6.-0300 / 6.3-0300 Printed circuit mount 6 A Power relay & 3 Pole changeover contacts or NO ( 3 mm contact gap) AC coils & DC coils Reinforced insulation between
SIGMA Terminal components
SIGMA Terminal components Optocouplers Content Terminal components Description, Certifications, Authorizations... 151 Ordering details R1000 / R2000 / R 1500... 152 Ordering details - Series RT, PT, MT...
3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
41 Low profile PCB relays 8-12 - 16 41 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 (3.5 mm pin pitch) 41.52-2 Pole 8 (5 mm pin pitch) 41.61-1 Pole 16 (5 mm pin pitch) PCB mount - direct or
38 Series - Relay Interface Modules A
Series - Relay Interface Modules 0.1-2 - 6 A - Relay interface modules for use with PLC systems, mm wide - Sensitive DC coil or AC/DC coil version - Supplied with integral coil - Instant removal of relay
Reliably switch high powers and specific loads Our TERMSERIES and D-SERIES products are proven in practice Let s connect.
Reliably switch high powers and specific loads Our TERMSERIES and D-SERIES products are proven in practice Let s connect. Relay modules and solid-state relays You are looking for suitable relays and solid-state
48 SERIES. Relay interface modules 8 A CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12
48 Relay interface modules 8 A 48 2 CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12 2 CO 8 A s Relay with forcibly guided contacts according to EN 50205 Type 35 mm rail (EN
2 or 4 pole changeover contact Plug-in/Faston 187
56 Miniature power relays 56 Plug-in - Power relay, & 4 pole Flange mount option - (Faston 87, 4.8 x 0.5 mm termination) C coils & DC coils Lockable test button and mechanical flag indicator Cadmium Free
77 Series - Modular Solid State Relay 5 A. Features. Timers and Monitoring relays
Series - Modular Solid State Relay 5 A 77 Features 77.01.x.xxx.8050 77.01.x.xxx.8051 5 A modular SSR, 1 NO output 17.5 mm housing 60 to 240 V AC output (with back to back SCR) 5 kv (1.2/50 μs) insulation
2 Pole CO, 8 A Plug-in 2 CO (DPDT) 1 CO (SPDT) 8/15 16/25* 250/ /400 2,000 4, /0.5/ /0.5/ (5/5) 300 (10/5)
46 Series - Relays for railway applications 8-16 A 46 SERIES Features Plug-in power relays: 8 A, 2 pole 16 A, 1 pole Complies with EN 45545-2:2013 (protection against fire of materials), EN 61373 (resistance
Datenblatt. W-Series WDU 10
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
Analogue signal processing
Contents Introduction.2 MCZ-SERIES.4 MCZ-SERIES C/C passive isolator.5 MCZ-SERIES PT 100/RT signal isolator.6 MCZ-SERIES Frequency signal isolator.7 MCZ-SERIES Limit value monitoring.8 MCZ-SERIES.9 MICROinterface
58 SERIES. Relay interface modules 7-10 A 58.P3 58.P4
58 58 3 & 4 CO relay interface modules, 31 mm wide with Push-in terminals Ideal interface for PLC and electronic systems 58.P3 58.P4 Type 58.P3 3 CO 10 A Push-in terminals Type 58.P4 4 CO 7 A Push-in terminals
Datenblatt. W-Series WDU 2.5
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
Monitoring Relays 3-Phase Active power direction Types DWB03, PWB03
Monitoring Relays 3-Phase Active power direction ypes DWB03, PWB03 DWB03 PWB03 RMS active power relays for three phase balanced applications Measuring if active power is within set limits Measure their
10/2 Product overview. 10/3 4AC3 0, 4AC3 1 bell transformers. 10/5 4AC AC3 6 transformers for permanent loads. 10/8 4AC2 4 power supply units
BETA Switching Transformers, Bells and Socket Outlets /2 Product overview /3 4AC3 0, 4AC3 1 bell transformers /5 4AC3 4... 4AC3 transformers for permanent loads /8 4AC2 4 power supply units / 7LQ2 2 bells
Output of three-phase motors at 50 Hz and 400 V
RT0, RH Coupling Relays (Interfaces) Description DC operation IEC 0 947 and EN 0 947 (VDE 00) The RT0 coupling relays for switching motors and RH for auxiliary circuits are laid out to the special requirements
62.22 Copper side view
62 Power relays 16 62 Printed circuit mount 16 Power relay 2 & 3 Pole changeover contacts or NO ( 3 mm contact gap) C coils & DC coils Reinforced insulation between coil and contacts according to EN 60335-1,
83 Series - Modular timers 16 A. Features
Features 83 Series - Modular timers 16 A 83.11 Multi-function and mono-function timer range - Multi-function & multi-voltage 83.11 - delay, multi-voltage 22.5 mm wide Six time scales from 0.1s to 20h High
NSD Safety Mat Controller Modules Both Modules are compliant to OSHA & ANSI Standards - EN ISO EN EN 81-1 EN NSD VDC
Datasheet NSD Safety Mat Controller Modules Both Modules are compliant to OSHA & ANSI Standards - EN ISO 13849-1 EN 62061 EN 81-1 EN 50156-1 Approvals NSD-3580 24 VDC NSD-3590 115 TO 230 VAC Technical
02/11/2015
17.5 mm - 1 Relay 5A EMER8 Part number 88829198 Multifunction or mono-function Multi-range (7 ranges) Multi-voltage or single voltage Screw terminals LED status indicator (1 voltage present LED, 1 timer
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC71, PPC71
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC71, PPC71 DPC71 PPC71 TRMS 3-phase over and under voltage, phase sequence, phase loss, asymmetry and tolerance monitoring relay Detect
Technical Information Barrier RB223
TI00132R/09/EN/13.14 71275790 Products Solutions Services Technical Information Barrier RB223 One or two-channel barrier Loop-powered barrier for the safe separation of 4 to 20 ma standard signal circuits
08/07/2015
17.5 mm - 1 Relay 8A MUR1 Part number 88827105 Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator (relay version) Possibility of external load connection
Type Nominal voltage (V) Code HSV V
Speed control Speed control relay - mm Control of overspeed, underspeed, operating rate, stopping Measurement via discrete sensors - -wire PNP or NPN, Namur, voltage 0-0V or volt-free contact type Works
Rated power VA (50 Hz)/W 0.6/ / / /0.3 Operating range V AC (50/60 Hz)
77 Modular Solid State Relay 5 A 77 5 A modular SSR, 1 NO AC output 17.5 mm housing 60 to 240 V AC output (with back to back SCR) 5 kv (1.2/50 µs) insulation between and Output Zero-crossing and random
XIOC technology and networking modules
/ XIO XIO digitale and analog input/output modules XIO technology and networking modules XIO the compact I/O and much more XIO are local expansion modules for direct connection to all Xontrol controllers.
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01, PPC01
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01, PPC01 DPC01 PPC01 TRMS 3-phase over and under voltage, phase sequence, phase loss, asymmetry and tolerance monitoring relay Detect
VEO. V2PF480Y/277VS01 Art.Nr.: B TECHNICAL DATA
Monitoring of phase sequence and phase loss Monitoring of asymmetry Supply voltage 208-480 V AC Supply circuit = measuring circuit 1 change-over contact Width 22,5 mm Status indication LED U: Supply voltage
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01, PPC01
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01 Product Description 3-phase or 3-phase+neutral line voltage monitoring relay for phase sequence, phase loss, asymmetry, over and
38 SERIES. Relay interface modules A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.
38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
Analog signal converters CC range
Analog signal converters CC range Benefits and advantages 2CDC 28 Fb Product range for analog signal processing CC-U range 8 different standard signal outputs on one device Input and output side universally
Electronic Circuit Breaker ESS20-0..
Description Electronic circuit breaker type ES-0.. is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 4 V switch-mode power supply. DC 4 V power supplies,
CONTA-ELECTRONICS. Relay systems
CONTA-ELECTRONICS Relay technology continues to play a large role in the reliability of industrial control and automation solutions. Because of their thin design, relay couplers are suitable for use in
Power Electronics. POWERSWITCH Semiconductor Contactor BF 9250, BH 9250
Power Electronics POWERSWITCH Semiconductor Contactor, BH 9250 02342 According to IEC/E 60 947-4-2, IEC/E 60 947-4-3 1-, 2- and 3-pole models Load current up to 50 A For AC load up to 480 V Switching at
MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
![MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]](/thumbs/95/123316479.jpg "MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]")
Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels CE marking
62 Series - Power relays 16 A. Features SERIES / / Printed circuit mount 16 A Power relay
62 Series - Power relays 16 62 SERIES Features 62.22 / 62.23 62.22-0300 / 62.23-0300 Printed circuit mount 16 Power relay 2 & 3 Pole changeover contacts or NO ( 3 mm contact gap) C coils & DC coils Reinforced
Power Electronics. POWERSWITCH Solid-State Contactor BF 9250, BH 9250
Power Electronics POWERSWITCH Solid-State Contactor, BH 9250 02342 According to IEC/E 60 947-4-2, IEC/E 60 947-4-3 1-, 2- and 3-pole models Load current up to 50 A For AC load up to 480 V Switching at
Electronic timer CT-SDS.22 Star-delta change-over with 2 n/o contacts Data sheet
CDC 0 F0t07 Features Rated control supply voltage -8 V DC, -0 V AC Single-function timer with star-delta change-over One device includes 7 time ranges (0.0 s - 0 min) n/o contacts LEDs for status indication
Electronic Circuit Breaker with reset input ESS20-1..
Electronic Circuit Breaker with reset input ESS0-.. Description The special device ESS0-.. is a further extension of the product line electronic circuit breakers. Type ESS0-.. has a width of only. mm and
Controls Contactors and Contactor Assemblies Special Applications
Controls Contactors and Contactor Assemblies Special Applications Price groups 1B, 1H /2 Introduction More information can be found on the Internet: see the opening information, page 13 - Contactors for
83 SERIES. 83 Series - Modular timers A. Features
Features 83 Series - Modular timers 12-16 A 83.01 83.02 83 Multi-function timer range 83.01 - Multi-function & multi-voltage, 1 Pole 83.02 - Multi-function & multi-voltage, 2 Pole (timed + instantaneous
05/09/2012
17.5 mm EMER8 Part number 88829198 Multifunction or mono-function Multi-range (7 ranges) Multi-voltage or single voltage Screw terminals LED status indicator (1 voltage present LED, 1 timer ON LED) Option
RN Thyristor Controllers
Data Sheet RN Thyristor Controllers RN Thyristor Controllers Thyristor Controllers (solid state relays) provide a means of varying the voltage for electrically resistive s, typically electric heating elements.they
Smart Power Relay E I...
Smart Power Relay E-48-8I... Description The Smart Power Relay E-48-8I.- is a remotely controllable electronic load disconnecting relay with three functions in a single unit: l electronic relay l electronic
Multi-voltage Multi-function. Wiring diagram (without control signal)
80 Modular timers 16 A 80 Multi-function and mono-function timer range 80.01T - Multi-function & multi-voltage 80.11T - On-delay, multi-voltage Complies with EN 45545-2:2013 (protection against fire of
Technical data. T2-SM230ASR en v Subject to changes / 3. Electrical data Nominal voltage AC
echnical data sheet SMASR Modulating damper actuator for adjusting air dampers in ventilation and air-conditioning systems for building services installations For air dampers up to approx. 4 m orque Nm
Power consumption In operation At rest For wire sizing
echnical data sheet GM4A-SR-P Modulating damper actuator for operating air control dampers in ventilation and airconditioning systems for building services installations For air dampers up to approx. 8
VEO. V2PF480Y/277VSY01 Art.Nr.: V2PF480Y/277VSY01P Art.Nr.: TECHNICAL DATA
P Monitoring of phase sequence and phase loss Monitoring of asymmetry Supply voltage 208-480 V AC Supply circuit = measuring circuit 1 change-over contact Width 22,5 mm Control elements Asymmetry Status
mm wide Low coil power PCB or 93 series sockets. Copper side view. 1 CO (SPDT) 6/10 250/400 1, /0.2/ (12/10) AgNi
34 Series - Slim electromechanical PCB relays 6 A Features 34.51 Ultra-slim 1 Pole - 6 A relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw or screwless sockets 1 Pole
Monitoring Relays 3-Phase Active power Types DWB02, PWB02
Monitoring Relays 3-hase Active power Types DWB02, WB02 DWB02 roduct Description DWB02 and WB02 are precise TRMS active power monitoring relays for 3- phase balanced systems. They can be used for monitoring
MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
![MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]](/thumbs/80/80593914.jpg "MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]")
MODEL: MMNV Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels
Electronic Circuit Protector ESX10-T
Electronic Circuit Protector ESX0-T Description Electronic circuit protector type ESX0-T is designed to ensure selective disconnection of systems. power supplies, which are widely used in industry today,
Industrial Controls. Catalog IC SIRIUS. Answers for industry.
Industrial Controls Catalog IC 10 2012 SIRIUS Answers for industry. Contactor Relays Siemens AG 2012 Overview Standards IEC 60947-1, EN 60947-1, IEC 60947--1, EN 60947--1 The 3TH42 and 3TH43 contactor
Electronic timer CT-SDS.22
CDC 0 F0t07 Features Rated control supply voltage 8 V DC, 0 V AC Single function timer with star delta change over One device includes 7 time ranges (0.0 s 0 min) n/o contacts LEDs for status indication
Measuring and monitoring relays CM-SRS.1 Current monitoring relays, single-phase AC/DC
2CDC 251 244 F0t05 Characteristics Monitoring of DC and AC currents: RMS measuring principle One device includes 3 measuring ranges Over- or undercurrent monitoring configurable Hysteresis adjustable from
1-Phase True RMS AC/DC Over and Under Current Types DIC01, PIC01
Monitoring Relays -Phase True RMS AC/DC Over and Under Current Types DIC0, PIC0 DIC0 PIC0 TRMS AC/DC over + under, over+over, under+under current and voltage monitoring relays DC process signal plus/minus
MasterINTERFACE 39 Series - Relay interface modules
Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic clip Dual screw head (blade+cross)
General technical data. Pollution degree 2. EMC / shock / vibration Noise emission acc. to EN Electrical safety (applied standards)
power supplies with basic functionality and a high level of reliability Single- and three-phase switched-mode power supply units Slim design Large temperature range from 25 C to 70 C The output voltage
Electronic Circuit Breaker ESS1 for System SVS1
Electronic Circuit Breaker for System SVS Description The electronic circuit breaker is designed to ensure selective disconnection of individual s in industrial systems which are powered by a DC 24 V switch
27/04/2015
Modular Carril DIN 35 mm HIL Part number 84871120 Control of AC and DC currents Automatic recognition of AC/DC Measurement ranges from 2 ma to 10 A Choice between over and undercurrent True RMS measurement
MODEL: KS. Plug-in Signal Conditioners K-UNIT
Plug-in Signal Conditioners K-UNIT DC ALARM Functions & Features Providing relay contact closures at preset DC input levels Dual (Hi/Lo) trip Multi-turn screwdriver setpoint adjustments Monitor jacks provided
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multi-function Types DPB01, PPB01
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multi-function Types, TRMS 3-phase over and under voltage, phase sequence and phase loss monitoring relays Detect when all 3 phases are present and have the
Digital Input Output Module for Zone 1 Series 9470/32
www.stahl.de > 16 can be adjusted in pairs as digital input or output > Intrinsically safe inputs/outputs Ex ia > For contacts, NAMUR proximity switches and low-power solenoid valves > Up to 8 can be used
MasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy
The power in relays and timers since Catalogue
The power in relays and timers since 1954 2012 Catalogue PCB relays Industrial relays Relay interface modules Sockets and accessories Timers Monitoring relays Energy meters Surge protection devices Industrial
PHOENIX CONTACT
Selective circuit breaker CLIPLINE Data sheet 100464_en_05 PHOENIX CONTACT 2009-11-17 1 Description The electronic circuit breaker, which has a design width of just 12.5 mm, selectively protects all 24
Solid State Relays 1- and 2 Pole SOLITRON With Integrated Heatsink
Solid State Relays 1- and 2 Pole SOLITRON With Integrated Heatsink AC Solid State Contactor, 1- and 2 poles Zero switching for heating and motor applications Instant-on switching Rated operational current
02/11/2015
35 mm - 1 Relay 8A OUR3 Part number 88867103 Multi-function or mono-function Multi-range Multi-voltage Relay output 1 or 2 : 8 A - 250 V (10 A UL) LED status indicator Option of connecting an external
CAN-IO Custom IO remote module
CAN-IO Custom IO remote module Main characteristics High customization Integrate different types of inputs/ outputs Up to 40 total channels DIN rail mount or plate Main applications Climatic chambers Autoclaves
Relay systems. Interface Relay Compact IRC, Multifunction Timing Relay MFR IRC
Interface Relay Compact IRC, Multifunction Timing Relay MFR IRC IRC relay couplers and MFR-IRCP timing relays embody a new strategy for 6.2 mm coupling relays. Our five different relay versions provide
IsoTrans 41. The load capability of the 20 ma source is limited and therefore requires efficient use of the load voltage.
ProLine Interface Technology Loop-Powered Isolators for Standard Signals For isolation of 0(4)... 20 ma standard current signals on up to 3 channels. The Task If no power supply is available, the galvanic
Electronic timer CT-MVS.23 Multifunctional with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-MVS.23 Multifunctional with 2 c/o (SPDT) contacts The CT-MVS.23 is a multifunctional electronic timer from the CT-S range. It provides 11 timing functions and 10 time ranges.
Signal conditioner - MACX MCR-UI-UI-NC
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
Multi-voltage Multi-function. BE: Off-delay with control signal BE: Off-delay with control signal CE: On- and off-delay with control signal
83 Modular timers 12-16 A 83 Multi-function timer range 83.01 - Multi-function & multi-voltage, 1 Pole 83.02 - Multi-function & multi-voltage, 2 Pole (timed + instantaneous options), external time setting
Multi-function (MI, ME, M2, M1) 2 NO (2 SPST-NO) 12 / / 400 3,000 1, / 0.3 / (5 / 5) AgNi
Features Special relay for alternating loads, for applications with pumps, compressors, air conditioning or refrigeration units 2 independent NO output, 12 A 4 functions 2 independent control signals,
Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages For the monitoring of voltages in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
316 PHOENIX CONTACT. RIF-1 for miniature and solid-state relays Page 334. RIF-2 for industrial relays Page 342. RIF-3 for octal relays Page 346
314 PHOENIX CONTACT PHOENIX CONTACT 315 RIF-0 for miniature and solid-state relays Page 328 RIF-1 for miniature and solid-state relays Page 334 RIF-2 for industrial relays Page 342 RIF-3 for octal relays
POWER TRANSDUCERS ACTIVE AND REACTIVE SERIES: T-W WATT T-V VAR
POWER TRANSDUCERS ACTIVE AND REACTIVE SERIES: T-W WATT T-V VAR The T-W or T-V power transducer converts ac current and voltage signals into a load independent dc signal proportional to active power (watts)
3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16 A (5 mm pin pitch) PCB mount - direct
Modular timers A
Modular timers 1-6 - 8-16 A Building automation Elevators and lifts 80 SЕRIES Automation for blinds, grilles and shutters oists and cranes Panels for electrical distribution Door and gate openers FINDER
Micro Contactors. Micro Contactor Relays 10. Micro Contactors 11. Micro Contactors With Solder Pins 12. Coil voltages 12. Micro Reversing Contactor 13
Micro Contactor Relays 10 Micro Contactors 11 Micro Contactors With Solder Pins 12 Coil voltages 12 Micro Reversing Contactor 13 Technical Data 14 Dimensions 18 D946E 9 Micro Contactor Relays 4-pole AC