RELAYS.

Transcription

1 RELAYS

2 YOUR AUTOMATION SOLUTIONS PROVIDER PROXIMITY SENSORS CORDSETS I/O SOLUTIONS MEASUREMENT RFID INTERFACE MODULES TURCK s global support network consists of over,00 employees in countries and 0 exclusive agencies worldwide that strive to meet customer expectations. Our sales, support and manufacturing facilities are strategically located across the world allowing us to respond to local market conditions and deliver customer specific solutions on a timely basis. We are a world leader in automation technology with a diverse and broad product portfolio that provides customer specific applications with high performance, reliable and cost effective solutions. The synergy in our product portfolio and customization flexibility are key components of our value proposition. Our expertise spans across two major industr y categories: Industrial Automation and Process Automation. Each weighs in with its own unique requirements and methods of conducting business. This market centric approach ensures that we develop application specific solutions across a variety of vertical market segments. CUSTOM CONNECTIVITY POSITION NETWORK MEDIA B Fax: () -00 TURCK Minneapolis, MN

3 RELECO by TURCK RELAYS Introduction Relays Sockets Timers Fax: () -00 TURCK Minneapolis, MN B0

4 Application Types Poles AC Ratings DC Ratings Page Sockets Page General Purpose C-A0 Universal -Pin, Standard 0 0 V 0. 0 V S - C-A0 Universal -Pin, Standard 0 0 V 0. 0 V S -0 C-A0 Square Base, -Pole 0 0 V 0. 0 V S - C-A0 Square Base, AC Power 00 V 0. 0 V S - C-A0 Square Base, AC Power 00 V 0. 0 V S - C-A0 Miniature, AC Power 0 V 0. 0 V S - C-A0 Miniature, AC Power 0 0 V 0. 0 V S - C-A0E Miniature, AC Power 0 0 V 0. 0 V S - C9-A Miniature, -Pin Plug-in 0 V 0. 0 V S9-9 C0-A0 Interface Standard 0 0 V 0. 0 V S0 0- C-A Interface Standard 0 V 0. 0 V 9 S - Bifurcated Low Level Loads C-T Universal -Pin Plug-in 0 V 0 V S - C-T Universal -Pin Plug-in 0 V 0 V S -0 C-T Miniature 0 V 0 V S - C0-T Interface Twin 0 V 0 V S0 0- Open DC Load Switching Flag Not Available C-G0 Universal -Pin Plug-in 0 0 V. 0 V S - C-G0 Universal -Pin Plug-in 0 0 V. 0 V S -0 C-G0 Square Base 00 V. 0 V S - C-G0 Miniature 0 0 V 0. 0 V S - C0-G0 Interface N.O. 0 0 V 0. 0 V S0 0- Flag Available C-G Interface N.O. 0 V 0. 0 V 0 S - Double Make DC Load Switching C-X0 -Pin, DC Power 0 0 V 0 V 9 S -0 C-X0 Square Base, DC Power 0 0 V 0 V S - C-X0 Square Base, DC Power 00 V 0 V 0 S - Flag Not Available C-X0 Miniature, DC Power 0 0 V 0 V 9 S - B Fax: () -00 TURCK Minneapolis, MN

5 Application Types Poles AC Ratings DC Ratings Page Sockets Page Latching C-R0 -Pin Plug-in 0 0 V 0. 0 V 0 S -0 C-R0 Square Base, -Pin 0 0 V 0. 0 V S - C-R0 Square Base 0 00 V 0. 0 V S - LED Not Available C9-R Miniature 0 V 0. 0 V S9-9 Magnet Blow-out C-M0 -Pin Plug-in, High DC Load 0 0 V 0 0 V S -0 C-M0 Square Base, High DC Load 00 V 0 0 V S - C-M0 Square Base, High DC Load 0 V 0 V S - Sensitive 00 mw - 00 mw C-E Universal -Pin Plug-in 0 V 0 V S -0 C-N Universal -Pin Plug-in 0 V 0 V S -0 Flag Not Available C9-E Miniature 0 V 0 V S9-9 Lamp Switching C-W0 Miniature, FASTON 0 0 V 0. 0 V 0 S - Railway Applications R-N0D Universal -Pin Plug-in 0 V 0 V S -0 R-A0D Miniature 0 0 V 0 0 V S - R-TD Miniature, Twin 0 V 0 V S - Solid State Relay CSS-AC Instantaneuos 0 V N/A S0 0- CSS-AZ Zero-cross 0 V N/A S0 0- CSS-DCN Common Negative N/A 0 V S0 0- CSS-DCP Common Positive N/A 0 V S0 0- Time Cube CT -Pin Plug-in Timer Module 0 0 V 0. 0 V - S - CT -Pin Plug-in Timer Module 0 0 V 0. 0 V - S Fax: () -00 TURCK Minneapolis, MN B0

6 System Features & Benefits Button and lockable level with functions Mechanical and LED indication as standard Coil voltage marked on top of the relay Label Five Colors for Easy Identification of Coil Voltage Red: 0 VAC Optional built-in suppressor Maroon: AC other than 0 V AC Part number and technical information marked on the side of the relay Grey: VAC/DC (UC) Color coded test button Dark Blue: DC other than V DC Industrial terminals FASTON.09 (. mm) Blue: VDC If you do not want the lockable function, you can use the orange dead-man-push-button. S0-OP for MRC and S9-OP for QRC ( piece bag). Push-to-Test-Pull-to-Lock button (PTPL) Dead-man-push-button A black blanking plug is available if you don't want a test button. S0-NP for MRC and S9-NP for QRC ( piece bag). Coil voltage marked on the top face of the relay Blanking Plug Label Double window for the mechanical identification LED LED Comprehensive Technical Label Coil Power Wiring diagram with sequential and DIN numbers Electrical diagram showing all additions to the coil Maximum switching capacity according to EN 09 (IEC 9) Approvals Country Canada Approval Authority: CSA Specification: C.; UL 0 China Authority: CQC Specification: GB0.-00 Russia Authority: KORPORATSIA STANDARD Specification: GOST R B0 Label Country United Kingdom USA Approval Authority: Lloyd s Register of Shipping Authority: UL Specification: C.; UL 0 Fax: () -00 TURCK Minneapolis, MN

7 Industrial Relays MRC, QRC, IRC Part Number Key Part Number Keys are to assist in IDENTIFICATION ONLY. Consult factory for catalog items not identified. C n(n) - T S y zz /...V Ref. nnnn Normal Industrial Relay code Relays with code R are used for railway series. Basic type refers to the product line Numbers between and are used. Relay Type A = Standard (general-purpose) contact E = Sensitive drive with 00 mw coil power G = Refers to a NO contact H = Single-point contact + twin contact load to signal current circuit for switching state feed back. Mixed contact configuration M = Relay with highly effective neodimium blow magnet for fast quenching of the arc. This relay is particularly suitable for high DC loads. N = Sensitive drive 00mW coil power R = Code for remanence relays, drive-specific ID S = Sensitive drive with 0 mw exciter input T = Twin contact for signal and control circuit W = With tungsten contact for maximum switch-on currents Number of Options Ref. nnn Relays with a reference number are versions with special (e.g. customised) features. These features may relate to special test criteria, tolerances or other properties. Availability of such relays may be limited to certain customers or applications. Nominal coil voltage or current AC V, DC V, UC V (AC/DC), AC A, DC A Relays are generally available for voltages of V. DC 0 V/AC 0 V (AC 00 V) or UC. V. Current relays available on request. D = Integrated freewheeling diode F = Integrated freewheeling diode and series diode e.g. for common alarm circuits R = RC connection for the coil X = Electric position indicating device with LED B = Bridge rectifier Definition of Contact Material This code may differ depending on type. Examples: 0 = in the standard range stands for AgNi -9 = see contact material for each type Product range Releco offers a wide range of relay types and versions and associated bases and accessories. Standard (general-purpose) relay, MRC series x mm round plug-in relay, - or - terminals multipole connector according to IEC with or contacts up to 0 A and different contact types and contact materials. Standard relay x mm with flat blade connectors with up to contacts and up to A with contacts. Miniature industrial relay, QRC series. mm series with up to contacts and up to 0 A with or contacts Interface relay, IRC series Overall width mm with up to electromechanical contacts, or fully electronic switches. Special relays, remanence relays While "normal" relays are monostable, i.e. they return to the idle state when the excitation is switched off, remanence relays are bistable, i.e. the current switching state is retained irrespective of the excitation. Relays of this type are available in different versions. Electronic relay, CSS In the IRC series different electronic DC or AC relays up to A are available. For AC relays a distinction is made between synchronously (zero crossing) and asynchronously switching versions. For switching transformer loads we recommended using asynchronously switching semiconductor switches. For incandescent lamp loads etc. synchronously switching switches are ideal for avoiding high switch-on currents. Accessories Suitable bases are available for the different relay series for DIN rail mounting or panel mounting. In addition, retaining clips are available for the relays, some of which are included in the scope of supply. Suitable bridges for cost-saving wiring in series are also available Fax: () -00 TURCK Minneapolis, MN B0

8 General Information Contact Materials Silver-nickel (AgNi) and silver-tin oxide (AgSnO ) are used as standard contact materials for all models. Other contact materials are available on request. Gold Flash For relays that are intended to be stored or remain unoperated for any length of time, a 0.µ layer of gold protects the contacts from oxidization. Gold Plating Increases the operational reliability. It should be used for switching low level currents. Contact Resistance Contact resistance is dependent on contact material, contact pressure and contact contamination. High contact resistance raises the temperature of the contacts, therefore reducing their working life. Typical contact resistance of the MR-C and QR-C relays is 0 mω. Gap Contact gap and opening speed of the contacts have an influence on the length and the duration of the arc. In the case of AC, a gap of 0. mm is sufficient to quench the arc which occurs automatically at the zero point of the cycle. In the case of DC, the arc only quenches when the contact gap is sufficient for the voltage and current applied. Please see tables of Max. DC Current. Coil Materials Coil bobbins are molded in polybutylene with fiberglass (0 C). Enamelled wires of Class F specification are used ( C). They are wound on precision automation winding machines, with the number of turns and wire tension accurately regulated and monitored. Tolerances Coil resistance is measured at 0 C and is regulated within ±0% of specified value. Standard Windings The coil voltages indicated in the catalog refer to standard windings. Other coil voltages are available, including products for series connection and amperometric applications. Please consult your distributor for details. Terminology and Technical Information Maximum Itntensity The indicated in every model, refers to the maximum stable current which should be possible in permanent conduction (ITH). In the case of AC, the Max. switching current that the relay can support is the same for all the values of voltages of the Max. switching voltage specified in every model. The product of the intensity and the voltage applied should not be higher than the values specified as Max. AC load. In the case of DC, the Max. switching current must be less than the current that causes the continuous arcing. The tables of Max. DC current show the possible values of intensity in relation to the applied voltage. Maximum Voltage The maximum voltage on the contacts depends on the insulation between each contact (pole-to-pole) and between all contacts and the coil. The EN 09 and VDE 00 standards set out the maximum voltage values, taking into consideration the quality of the insulation materials, pollution degree as well as the shape and dimensions of the contact barriers (creepage distance). in Series The connection of two or more contacts in series is equivalent to multiplying the contact gap by that amount. By using this method, a greater break capacity is achieved for DC switching. Minimum Working Voltage (pull in) This is the minimum voltage that must be supplied to the coil to ensure that the relay energizes, the contacts change over and are positively held in place without any vibration. The values of voltage specified are those at or below which the relay must pull in. Working at: 0 Hz 0 Hz AC 0 Hz Relays 0.xU n 0.xU n AC 0 Hz Relays 0.xU n 0.xU n DC Relays 0. x U n Maximum Release Voltage (drop out) This is the voltage at which the relay de-energizes, the contacts change over and are positively held in place without any vibration. The values of voltage specified are those at or above which the relay must drop out. DC relays 0% U n AC relays 0% U n in Parallel The connection of two or more contacts in parallel does not mean that it is possible to switch a greater load. However, the stable current and the operational reliability of the relay is increased. Double Make The double make contact arrangement is equivalent to two contacts connected in series. The maximum intensity supported corresponds to only one contact. This system allows for higher DC operating voltages. Bifurcated (Twin) The contact blade is divided into two parts, each with its own contact. Both contacts press down on their own independent fixed contacts. This system is particularly good for switching at very low levels of current. Contact Protection The electrical life of contacts can be prolonged by components which eliminate or reduce the back EMF transients. These voltages are generated by the reactive component of the load on disconnection, which increases the duration and the temperature of the arc. For AC, RC suppressors or varistors can be connected in parallel with the load or the contacts. For DC with an inductive load, the best method is to connect a diode in parallel with the load. Ambient Temperature The ambient temperature has an influence on the coil resistance and on its thermal dissipation capacity. Curve represents the variations of the pull in voltage (% Un ) in relation with the ambient temperature (T). Curve indicates the maximum values of the voltage applied ( Ub ) to the coil in relation with the nominal voltage ( Un ) at the ambient temperature (T). U b /U n T C B Fax: () -00 TURCK Minneapolis, MN

9 General Information General Purpose Relays A These are used for most general applications, such as automation, pneumatic, heating appliances, signaling, as an input or output interface, etc. Change-over contacts. Isolation between N.O./N.C.: 000 V rms Gap: 0. mm Rating loads of up to: 0 V AC 0 V DC 0. 0 V DC 0. 0 V DC Relays with Twin These are used to switch low currents with high operational reliability. T Change-over contacts. Isolation between contacts N.O./N.C.: 000 V rms Gap: 0. mm Gold-flashed contact 0.µ or plated with 0µ Au (optional). Maximum load: 0 V AC Minimum load: V DC Sensitive Relays, 0 mw One change-over contact S E N Sensitive Relays, 00 mw Two change-over contacts Sensitive Relays, 00 mw Three change-over contacts DC relays adjusted to work at lower power, available in both MR-C and QR-C versions. Gold-flashed contacts 0.µ or plated 0µ Au (optional). Operational voltage range: S relays: U n E relays: U n N relays: U n Relay Types Based on Applications Relays with Open G An open contact arrangement allows an increase in the contact gap, increasing the DC break capacity without altering the AC performance. Gap:. mm(qr-c types);. mm(mr-c) Isolation of contacts NO: >000 V rms Maximum load: 0 V AC. 0 V DC 0. 0 V DC Double Make Relays X These relays are designed to switch high DC loads at voltages of 0 and 0 VDC. If consists of one normally open contact with a gap > mm so that the arc length is divided by two. Isolation between contacts: >000 V rms The max. DC load is shown in the tables. X versions are available in MR-C and QR-C type housing. High Inrush Current Relay W Two open contacts, one of silver nickel and one of tungsten work in parallel but are physically displaced so that the tungsten contact makes and breaks the load. The silver contact is used for carrying the stable current. This relay was designed to switch incandescent and fluorescent lamps, (with p.f corrected), and DC inductive loads. Only available in C type housing. Maximum loads: 0 V ACa/b (lamps) 0 0 V AC. 0 V DC Relays with Mag. Blow Out M These versions are similar to X types, however they have an addition of a powerful magnet which blows out the arc generated when the contacts are opened, therefore quenching the arcing quickly and increasing the contact life. They are able to switch DC loads of up to 0 V DC and 0 V DC Remanence Relays A high remanence magnetic circuit R allows the relay to latch positively when the current applied flows through the coil in a direction and delatches if the current flows in the opposite direction. Electronic circuitry is added inside the relay to control this action and also protects against transient voltages. There is one winding for AC coils and two windings for DC coils. All coils withstand permanent connection. The relay can be operated with pulses of 0 ms, minimum, at nominal voltage. The data referred to in the specifications for each model refers to typical values of new relays at 0 C. Tables The tables of electrical life and the tables of maximum DC current show the typical result of exhaustive tests performed at an ambient temperature of 0 C, operating frequency of,00 operations/hour, and under per manent connection. The switching current ratings specified in the catalog refer to a minimum electrical life of 00,000 operations. Margin of Over-Voltage Coils withstand, on permanent conection, a maximum over-voltage of 0 percent U n, with rated current through the contacts at an ambient temperature of 0 C. Custom Relays Relays with special specifications can be supplied after consultation with an official RELECO distributor Fax: () -00 TURCK Minneapolis, MN B0 9

10 General Information MRC - QRC Protection Against Transients When the coil is disconnected from an electromagnet, peaks of inverse voltage appear at the terminals which can reach very high values. These pulses can be transmitted down the line associated with the coil and could possibly affect other components. In the case of a relay being operated by such devices as transistors, triacs, etc; it may be necessary to protect against transients. Transients Carried in the Line High voltage surges can be carried in the supply line to the relay coil. These may appear in the form of peaks or bursts and are generated by the connection and disconnection of electric motors, transformers, capacitors, etc. Normally a relay is unaffected by these pulses, but if a diode is connected in association with the coil, it must be capable of withstanding an inverse voltage higher than those of the incoming peaks. A X Coil Accessories X LED indication with rectifier. For DC and AC relays up to 0 V Surges of 000 V up to V Surges of 000 V from to 0 V Surges of 000 V from to 0 V Note: LED connected in series with the 0 VDC in QRC types. D Free-wheeling diode. DX Free-wheeling diode + LED Dampens transients caused by the relay coil on de-energization. Surges of 000 V up to 0 VDC Surges of 000 V from to 0 VDC (*) F FX Polarity and free wheeling diodes. Polarity + free wheeling diode + LED A diode in series with the coil protects the relay from reverse connection. Surges of 000 V up to 0 VDC Surges of 000 V from to 0 VDC (*) B Bridge rectifier incorporated. BX Bridge rectifier + LED indication. Allows the relay to operate in both AC or DC without any polarity inconvenience. Available only in voltages up to 0 V Surges of 000 V R Resistor and capacitor. Suppressor for AC coils. Surges of 000 V Available only in MRC types (*) Surges of 000 V in QRC types. + A D A + DX IRC LED and protection circuit connected to coil. X X FX LED with no polarity, (standard) Coils V CC and CA LED rectifier bridge in parallel LED with no polarity, (standard) Coils V CC and CA LED rectifier bridge in series LED with polarity A+ (option) Every DC coil voltage Polarity and Free-wheeling diodes BX LED with no polarity, (option) Only V and V AC/DC coils Rectifier bridge for AC/DC relays R LED not available (option) Every AC coil voltage RC protection against pulses on AC Protection Against Pulses When a relay coil is disconnected, reverse voltage peaks may arise and reach very high values. Said peaks can transmit to the coil associated line and other relays or semiconductors can be affected. If triac, transistor, etc. controls a relay, appropriate steps must be taken to avoid or decrease peaks down to a non-risky level. Both polarity and free-wheeling diodes (FX), must protect coils, to avoid malfunctions, provided DC relays in battery are installed. Making or breaking engines, transformers or contactors in an industrial environmental, may generate high voltage pulses, either isolated or burst, through the main line. The voltage level of those pulse may be high enough to affect the isolation of the coil. A A A LED consumption: ma Increases release time approx. times X V BX A + A F FX B BX A Increases release time approx. times + A A A A A Increases release time approx. times X V FX R A R A 0 B Fax: () -00 TURCK Minneapolis, MN

11 RELAYS Fax: () -00 TURCK Minneapolis, MN B0

12 MRC -Pole, Standard -Pin Plug-In Relay S-B, S-L, S-PO C-A0 General purpose Two pole, change-over contacts 0 A 0 V AC 0. A 0 V DC 0 A 0 V DC 0. A 0 V DC A(+) A Materials: Standard, code 0 AgNi Optional, code AgNi + µ Au Optional, code 9 AgNi + 0.µ Au 0 A Max. peak inrush current (0 ms) 0 A Max. switching voltage 0 V Max. AC load (Table ) A Max. DC load (Table ) Table Electrical Life, ops. x 0 Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/. W (DC) VAC Ω ma VDC Ω ma 9 9 K K 9 0 9K 0 K 9. 0 K Table Max. DC Load Insulation Dielectric strength ( minute): Open contacts Between adjacent poles Insulation resistance at 00 V Insulation, IEC 0-:,000 V GΩ / Operate time + bounce time ms Release time + bounce time ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relay Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 90 g. A A Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C-A0X... VAC RC suppressor C-A0R... VAC DC,, 0, 0 X = LED, no polarity (standard) C-A0X...VDC Free-wheeling diode C-A0DX...VDC Polarity and free-wheeling diodes C-A0FX...VDC AC/DC bridge rectifier (, or 0 V) C-A0BX... UC Lloyd s IEC 0 EN 09 B Fax: () -00 TURCK Minneapolis, MN

13 MRC -Pole, Twin -Pin Plug-In Relay 0 S-B, S-L, S-PO A(+) A Table Electrical Life, ops. x 0 C-T Low level Two change-over bifurcated contacts A 0 V AC A 0 V DC Min. contacts load: ma / V DC Materials: Standard, code AgNi + 0.µAu Optional, code AgNi + µau A Max. peak inrush current (0 ms) A Max. switching voltage 0 V Max. AC load (Table ). KVA Max. DC load (Table ) Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/. W (DC) Ops. AC VAC Ω ma VDC Ω ma 9 9 K K 9 0 9K 0 K 9. 0 K 0. 0 Table VA 0 Max. DC Load Insulation Dielectric strength ( minute): Open contacts Between adjacent poles Insulation resistance at 00 V Insulation, IEC 0-:,000 V GΩ / Operate time + bounce time ms Release time + bounce time ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relay Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 90 g A A Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C-TX... VAC RC suppressor C-TR... VAC. DC,, 0, 0 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-TX...VDC C-TDX...VDC C-TFX...VDC C-TBX... UC IEC 0 EN Fax: () -00 TURCK Minneapolis, MN B0

14 MRC -Pole, Standard -Pin Plug-In Relay Gap. mm S-B, S-L, S-PO A(+) A Table Electrical Life, ops. x 0 C-G0 General purpose, DC applications Two pole open contacts 0 A 0 V AC. A 0 V DC 0 A 0 V DC 0. A 0 V DC Materials: Standard, code 0 AgNi 0 A Max. peak inrush current (0 ms) 0 A Max. switching voltage 0 V Max. AC load (Table ) A Max. DC load (Table ) Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/. W (DC) VAC Ω ma VDC Ω ma K K 0 K 0 K 0 0 0K. Table Max. DC Load Insulation Dielectric strength ( minute): Open contacts,000 V Between adjacent poles Insulation resistance at 00 V GΩ Insulation, EN 0-: / Operate time + bounce time 0 ms Release time + bounce time 0 ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 90 g A A Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C-G0X... VAC RC suppressor C-G0R... VAC. DC,, 0, 0 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-G0X...VDC C-G0DX...VDC C-G0FX...VDC C-G0BX... UC IEC 0 EN 09 B Fax: () -00 TURCK Minneapolis, MN

15 MRC -Pole, Standard -Pin Plug-In Relay S-B, S-S, S-L, S-PO C-A0 General purpose Three pole, change-over contacts 0 A 0 V AC 0. A 0 V DC 0 A 0 V DC 0. A 0 V DC 9 A(+) A 0 Materials: Standard, code 0 AgNi Optional, code AgNi + µ Au Optional, code 9 AgNi + 0.µ Au 0 A Max. peak inrush current (0 ms) 0 A Max. switching voltage 0 V Max. AC load (Table ) A Max. DC load (Table ) Table Electrical Life, ops. x 0 0 Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/. W (DC) Ops. AC AC Cos AC 0. VAC Ω ma VDC Ω ma 9 9 K K 9 0 9K 0 K 9. 0 K 0. Table KVA Max. DC Load Insulation Dielectric strength ( minute): Open contacts Between adjacent poles Insulation resistance at 00 V Insulation, IEC 0-:,000 V GΩ / Amps. 0. DC DC L/R DC 0ms Volts A 0 A Operate time + bounce time ms Release time + bounce time ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 90 g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C-A0X... VAC RC suppressor C-A0R... VAC. 9 DC,, 0, 0 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-A0X...VDC C-A0DX...VDC C-A0FX...VDC C-A0BX... UC Lloyd s IEC 0 EN Fax: () -00 TURCK Minneapolis, MN B0

16 MRC -Pole, Twin -Pin Plug-In Relay 9 A(+) A 0 Table Electrical Life, ops. x 0 0 S-B, S-S, S-L, S-PO C-T Low level Three change-over bifurcated contacts A 0 V AC A 0 V DC Min. contacts load: ma / V DC Materials: Standard, code AgNi + 0.µAu Optional, code AgNi + µau A Max. peak inrush current ( ms) A Max. switching voltage 0 V Max. AC load (Table ). KVA Max. DC load (Table ) Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/. W (DC) Ops. AC VAC Ω ma VDC Ω ma 9 9 K K 9 0 9K 0 K 9. 0 K 0. 0 Table VA 0 Max. DC Load Insulation Dielectric strength ( minute): Open contacts,000 V Between adjacent poles Insulation resistance at 00 V GΩ Insulation, IEC 0-: / Amps Volts A 0 DC A Operate time + bounce time ms Release time + bounce time ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 90 g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C-TX... VAC RC suppressor C-TR... VAC. 9 DC,, 0, 0 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-TX...VDC C-TDX...VDC C-TFX...VDC C-TBX... UC IEC 0 EN 09 B Fax: () -00 TURCK Minneapolis, MN

17 MRC -Pole, Standard -Pin Plug-In Relay Gap. mm Table Electrical Life, ops. x 0 0 S-B, S-S, S-L, S-PO 9 A(+) A 0 C-G0 General purpose, DC applications Three pole, open contacts 0 A 0 V AC. A 0 V DC 0 A 0 V DC 0. A 0 V DC Materials: Standard, code 0 AgNi 0 A Max. peak inrush current (0 ms) 0 A Max. switching voltage 0 V Max. AC load (Table ) A Max. DC load (Table ) Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/. W (DC) Ops. AC AC Cos AC 0. VAC Ω ma VDC Ω ma K K 0 K 0 K 0 0 0K. 0. Table KVA Max. DC Load Insulation Dielectric strength ( minute): Open contacts Between adjacent poles Insulation resistance at 00 V Insulation, IEC 0-:,000 V GΩ / Amps. 0. DC L/R 0ms Volts A 0 A Operate time + bounce time 0 ms Release time + bounce time 0 ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 90 g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C-G0X... VAC RC suppressor C-G0R... VAC. 9 DC,, 0, 0 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-G0X...VDC C-G0DX...VDC C-G0FX...VDC C-G0BX... UC IEC 0 EN Fax: () -00 TURCK Minneapolis, MN B0

18 MRC -Pole, Standard -Pin Plug-In Relay Gap > mm (.+.) S-B, S-S, S-L, S-PO Magnet (+) 9 A(+) A 0 C-M0 Power relay, DC Single pole, magnetic blow out 0 A 0 V AC 0 A 0 V DC. A 0 V DC A 0 V DC Materials: Standard, code 0 AgNi 0 A Max. peak inrush current (0 ms) 0 A Max. switching voltage (pollution ) 0 V Max. switching voltage (pollution ) 0 V Max. AC load (Table ) A Max. DC load (Table ) Table Electrical Life, ops. x 0 0 Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/. W (DC) Ops. AC AC COS AC 0. VAC Ω ma VDC Ω ma 00 0 K K 0 9K 0 K 0 0 K 0. Table KVA DC Voltage Endurance Insulation Dielectric strength ( minute): Open contacts Insulation resistance at 00 V GΩ Insulation, IEC 0-: / Ops. DC 0V DC 0V Nominal coil power Operate time Release time Isolation: EN09 pollution, Gr C Dielectric strength, contacts/coils. VA (AC),. W (DC) 0 ms 0 ms 0 V 0. 0 Amp A 0 A Standard Types (0/0 Hz and DC) AC,,, (0), 0 X = LED (stardard) RC suppressor C-M0X... VAC C-M0R... VAC. 9 DC,, 0, 0 X = LED, no polarity (stardard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-M0X...VDC C-M0DX...VDC C-M0FX...VDC C-X0BX... UC IEC 0 EN 09 B Fax: () -00 TURCK Minneapolis, MN

19 MRC -Pole, Standard -Pin Plug-In Relay Gap > mm (.+.) S-B, S-S, S-L, S-PO Magnet (+) 9 A(+) A 0 C-X0 Power relay for DC applications Single pole, N.O., double make 0 A 0 V AC A 0 V DC 0 A 0 V DC. A 0 V DC Materials: Standard, code 0 AgNi 0 A Max. peak inrush current (0 ms) 0 A Max. switching voltage 0 V Max. AC load (Table ) A Max. DC load (Table ) Table Electrical Life, ops. x 0 0 Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/. W (DC) Ops. AC AC Cos AC 0. VAC Ω ma VDC Ω ma 00 0 K K 0 9K 0 K 0 0 K Amps. 0. Table KVA DC L/R 0ms Volts Max. DC Load A 0 A Insulation Dielectric strength ( minute): Open contacts Insulation resistance at 00 V GΩ Insulation, IEC 0-: / Operate time + bounce time 0 ms Release time + bounce time 0 ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP0 / RT 90 g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C-X0X... VAC RC suppressor C-X0R... VAC. 9 DC,, 0, 0 X = LED, no polarity (stardard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-X0X...VDC C-X0DX...VDC C-X0FX...VDC C-X0BX... UC IEC 0 EN Fax: () -00 TURCK Minneapolis, MN B0 9

20 MRC -Pole, Latching -Pin Plug-In Relay C-R0 S-B, S-S, S-L, S-PO Magnetic latching Two change-over contacts 0 A 0 V AC 0. A 0 V DC 0 A 0 V DC 0. A 0 V DC 9 A A ON (+) OFF (+) A (-) 0 Materials: Standard, code 0 AgNi Optional, code AgNi + µ Au Optional, code 9 AgNi + 0.µ Au 0 A Max. peak inrush current (0 ms) 0 A Max. switching voltage 0 V Max. AC load (Table ) A Max. DC load (Table ) Table Electrical Life, ops. x 0 0 Coils ON pulse power OFF pulse power One winding for AC. Two winding for DC. VA / W 0. VA / W Ops. AC AC Cos AC 0. VAC ON ma OFF ma VDC ON ma OFF ma Table KVA Max. DC Load Insulation Dielectric strength ( minute): Open contacts,000 V Between adjacent poles Insulation resistance at 00 V GΩ Insulation, IEC 0-: / Amps. 0. DC DC L/R DC 0ms Volts Minimum pulse length for ON / OFF 0 ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 9 g A 9 0 A Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) C-R0... VAC DC,,, 0 C-R0...VDC. IEC 0 EN 09 0 B Fax: () -00 TURCK Minneapolis, MN

21 MRC -Pole, Standard -Pin Plug-In Relay S-B, S-S, S-L, S-PO C-E Sensible, 00 mw Two change-over contacts, A Operating range: 0.-. x U n A 0 V AC A 0 V DC 9 A(+) A 0 Materials: Standard, code AgNi + 0.µ Au Optional, code AgNi + 0µ Au A Max. peak inrush current (0 ms) A Max. switching voltage 0 V Max. AC load (Table ). KVA Max. DC load (Table ) Table Electrical Life, ops. x 0 0 Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n 00 mw Ops. AC VDC Ω ma K K 0 0 K. 0 K. 0. Table KVA Max. DC Load Insulation Dielectric strength ( minute): Open contacts Between adjacent poles Insulation resistance at 00 V Insulation, IEC 0-:,000 V GΩ / Amps Volts. A 9 0 DC A Operate time + bounce time ms Release time + bounce time 0 ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 90 g Standard Types DC,,, 0, 0 Free-wheeling diode Polarity and free-wheeling diodes Connecting diodes to the coil will increase the release time. LED available upon request. C-E...VDC C-ED...VDC C-EF...VDC IEC 0 EN Fax: () -00 TURCK Minneapolis, MN B0

22 MRC -Pole, Standard -Pin Plug-In Relay 0 9 S-B, S-S, S-L, S-PO A(+) A 0 Table Electrical Life, ops. x 0 C-N Sensitive, 00 mw Three change-over contacts, A Operating range: 0.-. x U N A 0 V AC A 0 V DC Materials: Standard, code AgNi + 0,µ Au Optional, code AgNi + 0µ Au A Max. peak inrush current (0 ms) A Max. switching voltage 0 V Max. AC load (Table ). KVA Max. DC load (Table ) Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n 00 mw Ops. AC VDC Ω ma 0 K 0 K 0 K 0. Table KVA Max. DC Load Insulation Dielectric strength ( minute): Open contacts,000 V Between adjacent poles. K Insulation resistance at 00 V GΩ Insulation, IEC 0-: / Amps. 0. DC Volts. A 9 0 A Operate time + bounce time ms Release time + bounce time 0 ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 90 g Standard Types DC,, 0, 0 Free-wheeling diode Polarity and free-wheeling diodes Connecting diodes to the coil will increase the release time. LED available upon request. C-N... VAC C-ND...VDC C-NF...VDC IEC 0 EN 09 B Fax: () -00 TURCK Minneapolis, MN

23 MRC -Pole Relay, -Pin Plug-In Railway Relay S-B, S-S, S-L, S-PO R-N0D Railway Application Relay According to EN 00--/99 EN /99 A 0 V AC A 0 V DC 9 A(+) A 0 Materials: Standard, code 0 AgNi Optional, code AgNi + 0.µ Au Optional, code AgNi + 0µ Au A Max. peak inrush current (0 ms) A Max. switching voltage 0 V Max. AC load (Table ) Max. DC load (Table ) Ops. Table Electrical Life, ops. x 0 0 AC AC Cos AC 0. Coils Operation Range Power Consumption Generated transients Voltage Ω ± 0% ma U U n.0 W V, include FWD Amps VA Table Electrical Life, ops. x 0 0 DC L/R 0ms Volts Isolation Polution grade PD With voltage (./0µs) / Dielectric strength ( minute): Contact coil KV/0 V Between different poles KV/0 V Between contacts on same pole 0 KV/0 V Max working temperature 0 C Number of mechanical operations >0 million Thermic Class B (0 C) Vibration: Category/Class /B Body Mounted Vibration -0 Hz ( axes) Shock g ( axes) Operation (UN)/release time ms/ ms 9 g Relay + Socket 0 g Relay Protection IP 0. A 9 0 A Standard Types DC,,, 0 X = LED Free-wheeling diode LED and free-wheeling diode R-N0...VDC R-N0X...VDC R-N0D...VDC R-N0DX...VDC Fax: () -00 TURCK Minneapolis, MN B0

24 MRC -Pole, Square Base, Plug-In Relay S-B, S-L, S-P, S-PO C-A0 General purpose Four change-over contacts 0 A 0 V AC 0. A 0 V DC A 0 V DC 0. A 0 V DC 9 0 A(+) A Materials: Standard, code 0 AgNi Optional, code AgNi + µ Au Optional, code 9 AgNi + 0.µ Au 0 A Max. peak inrush current (0 ms) 0 A Max. switching voltage 0 V Max. AC load (Table ) A Max. DC load (Table ) Table Electrical Life, ops. x 0 0 Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/. W (DC) Ops. AC AC Cos AC 0. VAC Ω ma VDC Ω ma 00 0 K 0 K 0 K 0 K 0 0 K. 0. Table KVA Max. DC Load Insulation Dielectric strength ( minute): Open contacts,000 V Between adjacent poles Insulation resistance at 00 V GΩ Insulation, IEC 0-: / Amps. 0. DC DC L/R DC 0ms Volts Operate time + bounce time 0 ms Release time + bounce time ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 90 g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C-A0X... VAC RC suppressor C-A0R... VAC DC,, 0, 0 X = LED no polarity (standard) C-A0X...VDC Free-wheeling diode C-A0DX...VDC Polarity and free-wheeling diodes C-A0FX...VDC AC/DC bridge rectifier (, or 0 V) C-A0BX... UC FASTON.0 Lloyd s IEC 0 EN 09 B Fax: () -00 TURCK Minneapolis, MN

25 MRC -Pole, Square Base, Plug-In Relay Gap > mm (.+.) Table Electrical Life, ops. x 0 0 S-B, S-L, S-P, S-PO A(+) A C-X0 Power relay, DC applications Two pole, N.O., double make 0 A 0 V AC 0 V DC 0 A 0 V DC. 0 V DC Materials: Standard, code 0 AgNi 0 A Max. peak inrush current (0 ms) 0 A Max. switching voltage 0 V Max. AC load (Table ) 0. KVA Max. DC load (Table ) Coils (Ohms 0 ) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/. W (DC) Ops. AC AC Cos AC 0. VAC Ω ma VDC Ω ma 00 0 K K 0 9K 0 K 0 0 K 0. Table KVA Max. DC Load Insulation Dielectric strength ( minute): Open contacts Between adjacent poles Insulation resistance at 00 V Insulation, IEC 0-:,00 V GΩ / Amps. 0. DC L/R 0ms Volts Operate time + bounce time 0 ms Release time + bounce time ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 90 g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C-X0X... VAC RC suppressor C-X0R... VAC DC,, 0, 0 X = LED no polarity (standard) C-X0X...VDC Free-wheeling diode C-X0DX...VDC Polarity and free-wheeling diodes C-X0FX...VDC AC/DC bridge rectifier (, or 0 V)) C-X0BX... UC FASTON.0 IEC 0 EN Fax: () -00 TURCK Minneapolis, MN B0

26 MRC -Pole, Square Base, Plug-In Relay Table Electrical Life, ops. x 0 Ops Table Amps S-B, S-L, S-P, S-PO A A ON (+) OFF (+) A (-) AC AC Cos AC KVA Max. DC Load DC DC L/R DC 0ms Volts C-R0 Magnetic latching relay Three change-over contacts, 0 A 0 A 0 V AC 0. A 0 V DC 0 A 0 V DC 0. A 0 V DC Materials: Standard, code 0 AgNi Optional, code AgNi + µau Optional, code 9 AgNi + 0.µ Au 0 A Max. peak inrush current (0 ms) 0 A Max. switching voltage 0 V Max. AC load (Table ) A Max. DC load (Table ) Coils ON pulse power OFF pulse power One winding for AC, Two windings for DC Insulation. VA / W 0. VA / W VAC ON ma OFF ma VDC ON ma OFF ma Dielectric strength ( minute): Open contacts,000 V Between adjacent poles Insulation resistance at 00 V GΩ Insulation, IEC 0-: / Minimun, pulse length for ON / OFF 0 ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 9 g 9 0 Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) C-R0... VAC. DC,,, 0 C-R0...VDC FASTON ø.. C.I... IEC 0 B Fax: () -00 TURCK Minneapolis, MN

27 MRC -Pole, Square Base, Plug-In Relay Amps. Ops AC Cos KVA DC L/R 0ms Volts. FASTON.. C.I A A(+) A B Table Electrical Life, ops. x 0 Table S-S, S-L, S-P, S-PO, S-M A.0.0 ø. 9 B Max. DC Load C-A0 General purpose Two change-over contacts A 00 V AC 0. A 0 V DC A 0 V DC 0. A 0 V DC Materials: Standard, code 0 AgNi Optional, code AgNi + µau Optional, code 9 AgNi + 0.µ Au A Max. peak inrush current (0 ms) 0 A Max. switching voltage 00 V Max. AC load (Table ) KVA Max. DC load (Table ) Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power Insulation Dielectric strength ( minute): Open contacts Between adjacent poles Insulation resistance at 00 V Insulation, IEC 0-: 0. x U n 0. x U n. VA (AC)/. W (DC) VAC Ω ma VDC Ω ma 00 0 K 0 K 0 K 0 K 0 0 K 00 K,000 V KV KV GΩ KV/ Operate time + bounce time 0 ms Release time + bounce time 0 ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 90 g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0), 00 X = LED (standard) C-A0X... VAC RC suppressor C-A0R... VAC DC,, 0, 0 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-A0X...VDC C-A0DX...VDC C-A0FX...VDC C-A0BX... UC IEC 0 EN Fax: () -00 TURCK Minneapolis, MN B0

28 MRC -Pole, Square Base, Power Relay Amps. Table Electrical Life, ops. x 0 Ops. Table A A(+) A B Res Cos KVA Max. DC Load Volts. FASTON.. C.I. S-S, S-L, S-P, S-PO, S-M A DC L/R 0ms ø. 9 B.0.0 C-A0 General purpose Three change-over contacts A 00 V AC 0. A 0 V DC A 0 V DC 0. A 0 V DC Materials: Standard, code 0 AgNi A Max. peak inrush current (0 ms) 0 A Max. switching voltage 00 V Max. AC load (Table ) KVA Max. DC load (Table ) Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power Insulation Dielectric strength ( minute): Open contacts Between adjacent poles Insulation resistance at 00 V Insulation, IEC 0-: 0. x U n 0. x U n. VA (AC)/. W (DC) VAC Ω ma VDC Ω ma 00 0 K 0 K 0 K 0 K 0 0 K. 00 K,000 V KV KV G Ω KV/ Operate time + bounce time 0 ms Release time + bounce time 0 ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 9 g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C-A0X... VAC RC suppressor C-A0R... VAC DC,, 0, 0 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-A0X...VDC C-A0DX...VDC C-A0FX...VDC C-A0BX... UC En 09 IEC 0 B Fax: () -00 TURCK Minneapolis, MN

29 MRC -Pole, Square Base, Power Relay S-S, S-L, S-P, S-PO, S-M C-G0 General purpose, DC applications Three open contacts A 00 V AC. A 0 V DC A 0 V DC 0. A 0 V DC Gap. mm 9 A A(+) A B Materials: Standard, code 0 AgNi A Max. peak inrush current (0 ms) 0 A Max. switching voltage 00 V Max. AC load (Table ) KVA Max. DC load (Table ) Amps. Table Electrical Life, ops. x 0 Ops. Table AC Cos KVA Max. DC Load Volts. FASTON.. C.I A DC L/R 0ms.0.0 ø. 9 B Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power Insulation Dielectric strength ( minute): Open contacts Between adjacent poles Insulation resistance at 00 V Insulation, IEC 0-: 0. x U n 0. x U n. VA (AC)/. W (DC) VAC Ω ma VDC Ω ma K K 0 K 0 0 K 00 K 0 0K.,000 V KV KV GΩ KV/ Operate time + bounce time 0 ms Release time + bounce time 0 ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 9 g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C-G0X... VAC RC suppressor C-G0R... VAC DC,, 0, 0 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-G0X...VDC C-G0DX...VDC C-G0FX...VDC C-G0BX... UC EN 09 IEC Fax: () -00 TURCK Minneapolis, MN B0 9

30 MRC -Pole, Square Base, Power Relay Ops. Amps Gap > mm AC Cos KVA Volts FASTON.. C.I. A A(+) A B Table Electrical Life, ops. x 0 Table S-S, S-L, S-P, S-PO, S-M A.0.0 ø. DC L/R 0ms Max. DC Load 9 B C-X0 Power relay, DC applications Single pole, N.O., double make A 00 V AC A 0 V DC A 0 V DC. A 0 V DC Materials: Standard, code 0 AgNi A Max. peak inrush current (0 ms) 0 A Max. switching voltage 00 V Max. AC load (Table ) KVA Max. DC load (Table ) Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power Insulation Dielectric strength ( minute): Between adjacent poles Insulation resistance at 00 V Insulation, IEC 0-: 0. x U n 0. x U n. VA (AC)/. W (DC) VAC Ω ma VDC Ω ma K K 0 K 0 0 9K 00 K 0 K. KV KV GΩ KV/ Operate time + bounce time 0 ms Release time + bounce time 0 ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 90 g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C-X0X... VAC RC suppressor C-X0R... VAC DC,, 0, 0 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-X0X...VDC C-X0DX...VDC C-X0FX...VDC C-X0BX... UC IEC 0 0 B Fax: () -00 TURCK Minneapolis, MN

31 MRC -Pole, Square Base, Power Relay Ops (+) Magnet A A(+) Gap > mm A B Table Electrical Life, ops. x 0 Table S-S, S-L, S-P, S-PO, S-M AC Cos KVA DC Voltage Endurance DC 0V DC 0V C-M0 DC power relay One N.O. pole, magnetic blow out A 00 V AC 0 A 0 V DC. A 0 V DC Ind A 0 V DC Ind Materials: Standard, code 0 AgNi A Max. peak inrush current (0 ms) 0 A Max. switching voltage 00 V Max. AC load (Table ) KVA Max. DC load (Table ) Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power Insulation Dielectric strength ( minute): Open contacts Insulation resistance at 00 V Insulation, EN 09/IEC 0-: 0. x U n 0. x U n. VA (AC)/. W (DC) VAC Ω ma VDC Ω ma K K 0 Kv 0 0 9K 00 K 0 K.,000 V KV GΩ KV/ Ops Amp. FASTON. A A 9 B Operate time + bounce time 0 ms Release time + bounce time 0 ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC relays, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 90 g Standard Types (0 / 0 Hz and CC) AC,,, (0-0), 0 X = LED (standard) RC suppressor DC,,, 0, 0/,0 X = LED Free-wheeling diodes Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-M0X... VAC C-M0R... VAC C-M0X...VDC C-M0DX...VDC C-M0FX...VDC C-M0BX... UC IEC 0 EN Fax: () -00 TURCK Minneapolis, MN B0

32 MRC -Pole, Square Base, Power Relay Table Electrical Life, ops. x 0 0 Magnet A A(+) (+) 9 (+) Gap. mm S-S, S-L, S-P, S-PO, S-M A B C-M0 Power relay, DC Double pole, N.O., magnetic blow out A 0 V AC A 0 V DC A 0 V DC Materials: Standard, code 0 AgNi A Max. peak inrush current (0 ms) 0 A Max. switching voltage 0 V Max. AC load (Table ) KVA Max. DC load (Table ) Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (CA) /. W (CC) Amps. AC Cos 0. VAC Ω ma VDC Ω ma K K 0 K 0. 0 K 0. Table KVA Max. DC Load DC L/R 0ms Insulation Dielectric strength ( minute): Open contacts Between adjacent poles Insulation resistance at 00 V Insulation, EN 09/IEC 0-: KV KV KV GΩ KV/ Amps Amps. A A. FASTON. 9 B Operate time + bounce time 0 ms Release time + bounce time 0 ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 90 g Standard Types (0 / 0 Hz and CC) AC,,, (0), 0 (0) X = LED (standard) RC suppressor DC,,, 0, 0/, 0 X = LED Free-wheeling diodes Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-M0X... VAC C-M0R... VAC C-M0X...VDC C-M0DX...VDC C-M0FX...VDC C-M0BX... UC IEC 0 EN 09 B Fax: () -00 TURCK Minneapolis, MN

33 MRC -Pole, Latching Relay S-S, S-L, S-P, S-PO, S-M C-R0 Magnetic latching relay Two Change-over contacts, 0 A 0 A 00 V AC 0 A 0 V DC 0. A 0 V DC 0. A 0 V DC 9 A A A ON (+) OFF (+) A (-) B Materials: Standard, code 0 AgNi 0 A Max. peak inrush current (0 ms) 0 A Max. switching voltage 00 V Max. AC load (Table ) KVA Max. DC load (Table ) Table Electrical Life, ops. x 0 0 Coils (Ohms 0 C) ON pulse power OFF pulse power One winding for AC, two windings for DC. VA/W 0. VA/W Ops. AC AC Cos AC 0. VAC ON ma OFF ma VDC ON ma OFF ma Table Amps KVA Max. DC Load DC DC L/R DC 0ms Volts Insulation Dielectric strength ( minute): Open contacts Between adjacent poles Insulation resistance at 00 V Insulation, EN 09/IEC 0-:,000 V KV KV GΩ KV/ Minimun, pulse length for ON / OFF 0 ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 9 g A A 9 B Standard Types AC 0 Hz, (0 Hz):,,, (0-0), 0, (0) C-R0... VAC DC,,, 0 C-R0...VDC. FASTON. IEC Fax: () -00 TURCK Minneapolis, MN B0

34 MRC -Pole, Miniature Power Plug-In Relay 0 S- A(+) A Table Electrical Life, ops. x 0 C-A0 General purpose One change-over contact, A A 0 V AC 0. A 0 V DC A 0 V DC 0. A 0 V DC Materials: Standard, code 0 AgNi A Max. peak inrush current (0 ms) 0 A Max. switching voltage 0 V Max. AC load (Table ) KVA Max. DC load (Table ) Only plug-in S- socket Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/. W (DC) Ops. Res AC Cos ϕ 0. VAC Ω ma VDC Ω ma 0 0 K 0. K 0 K. 0 9K 0. 0 Table Amps KVA DC L/R 0ms Volts Max. DC Load Insulation Dielectric strength ( minute): Open contacts Insulation resistance at 00 V Insulation, IEC 0-:,000 V GΩ / Operate time + bounce time ms Release time + bounce time ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C-A0X... VAC A B DC,,, 0, X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-A0X...VDC C-A0DX...VDC C-A0FX...VDC C-A0BX... UC. FASTON. IEC 0 EN 09 B Fax: () -00 TURCK Minneapolis, MN

35 QRC -Pole, Miniature Power Plug-In Relay 0 S-C, S-L, S-P, S-PO, S-I/O A(+) A Table Electrical Life, ops. x 0 C-A0 General purpose Two pole, change-over contacts 0 A 0 V AC 0. A 0 V DC 0 A 0 V DC 0. A 0 V DC Materials: Standard, code 0 AgNi Optional, code AgNi + µ Au Optional, code 9 AgNi + 0.µ Au 0 A Max. peak inrush current (0 ms) 0 A Max. switching voltage 0 V Max. AC load (Table ) A Max. DC load (Table ) Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/ W (DC) Ops. AC Cos 0. VAC Ω ma VDC Ω ma 0 9 K 0. k 0 K. 0 K 0. Table KVA Max. DC Load Insulation Dielectric strength ( minute): Open contacts Between adjacent poles Insulation resistance at 00 V Insulation, IEC 0-:,000 V GΩ / Amps. 0. DC DC L/R DC 0ms Volts Operate time + bounce time ms Release time + bounce time ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT g Standard Types AC 0 Hz, (0 Hz):,,,, (0), 0, (0) X = LED (standard) C-A0X... VAC A B DC,,,, 0, X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-A0X...VDC C-A0DX...VDC C-A0FX...VDC C-A0BX... UC. FASTON. Lloyd s IEC 0 EN Fax: () -00 TURCK Minneapolis, MN B0

36 MRC -Pole, Miniature Power Plug-In Relay A(+) A Table Electrical Life, ops. x 0 Ops. 0 S-C, S-L, S-P, S-PO AC Cos 0. C-A0E General purpose Two pole 0 A 0 V AC 0. A 0 V DC 0 A 0 V DC 0. A 0 V DC Materials: Standard, code 0 AgNi Optional, code AgNi + µ Au 0 A Max. peak inrush current (0 ms) 0 A Max. switching voltage 0 V Max. AC load (Table ) A Max. DC load (Table ) Coils (Ohms 0ºC) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/ W (DC) VAC Ω ma VDC Ω ma 0 9 K 0. K 0 K. 0 K 0. Table KVA Max. DC Load Insulation Dielectric strength ( minute): Open contacts Between adjacent poles Insulation resistance at 00 V Insulation, IEC 0-:,000 V GΩ / Amps. 0. DC DC L/R DC 0ms Volts Operate time + bounce time ms Release time + bounce time ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) C-A0E... VAC. DC,,, 0 C-A0E...VDC. FASTON. Lloyd s IEC 0 EN 09 B Fax: () -00 TURCK Minneapolis, MN

37 QRC -Pole, Twin Contact Miniature Power Plug-In Relay 0 S-C, S-L, S-P, S-PO, S-I/O A(+) A Table Electrical Life, ops. x 0 C-T Low level Two change-over bifurcated contacts A 0 V Res A 0 V DC Min. contacts load: ma / V DC Materials: Standard, code AgNi + 0.µ Au Optional, code AgNi + µ Au A Max. peak inrush current (0 ms) A Max. switching voltage 0 V Max. AC load (Table ). KVA Max. DC load (Table ) Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/ W (DC) Amps. AC VAC Ω ma VDC Ω ma 0 9 K 0. K 0 K. 0 K 0. 0 Table VA 0 Max. DC Load Insulation Dielectric strength ( minute): Open contacts Between adjacent poles Insulation resistance at 00 V Insulation, IEC 0-:,000 V GΩ / Amps. 0. DC Volts Operate time + bounce time ms Release time + bounce time ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C-TX... VAC A B DC,,, 0 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-TX...VDC C-TDX...VDC C-TFX...VDC C-TBX... UC. FASTON. IEC 0 EN Fax: () -00 TURCK Minneapolis, MN B0

38 MRC -Pole, Miniature Power Plug-In Relay C-G0 S-C, S-L, S-P, S-PO, S-I/O A(+) Power relay, DC application Two open contacts, Gap. mm 0 A 0 V AC 0. A 0 V DC 0A 0 V DC 0. A 0 V DC Materials: Standard, code 0 AgNi 0 A Max. peak inrush current (0 ms) 0 A Max. switching voltage 0 V Max. AC load (Table ) A Max. DC load (Table ) Gap. mm A Table Electrical Life, ops. x 0 0 Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/. W (DC) Res Cos 0. VAC Ω ma VDC Ω ma Ops. 99 K K 0 K. 0 K 0. Table KVA Max. DC Load Insulation Dielectric strength ( minute): Open contacts Between adjacent poles Insulation resistance at 00 V Insulation, IEC 0-:,000 V GΩ / Amps. 0. Res DC L/R DC 0ms Volts Operate time + bounce time 0 ms Release time + bounce time 0 ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C-G0X... VAC A B DC,,, 0 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-G0X...VDC C-G0DX...VDC C-G0FX...VDC C-G0BX... UC. FASTON. Lloyd s IEC 0 EN 09 B Fax: () -00 TURCK Minneapolis, MN

39 QRC -Pole, Miniature Power Plug-In Relay Gap mm (.+.) S-C, S-L, S-P, S-PO, S-I/O A(+) A C-X0 Power relay, DC application Single pole, NO, double make 0 A 0 V AC A 0 V DC 0 A 0V DC A 0 V DC Materials: Standard, code 0 AgNi 0 A Max. peak inrush current (0 ms) 0 A Max. switching voltage 0 V Max. AC load (Table ) A Max. DC load (Table ) Table Electrical Life, ops. x 0 0 Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/. W (DC) Res Cos 0. VAC Ω ma VDC Ω ma Ops. 0 K K 0 K. 0 9K 0. Table KVA Max. DC Load Insulation Dielectric strength ( minute): Open contacts Insulation resistance at 00 V Insulation, IEC 0-: GΩ / Amps. 0. Res DC L/R 0ms Volts Operate time + bounce time 0 ms Release time + bounce time 0 ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C-X0X... VAC A B DC,,, 0 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-X0X...VDC C-X0DX...VDC C-X0FX...VDC C-X0BX... UC. FASTON. Lloyd s IEC 0 EN Fax: () -00 TURCK Minneapolis, MN B0 9

40 MRC -Pole, Miniature Power Plug-In Relay 0 S-C, S-L, S-P, S-PO, S-I/O A(+) A Table Electrical Life, ops. x 0 C-W0 High inrush current Single pole, tungsten contacts 0 A 0 V AC 0 V ACa/b Materials: Standard, code 0 AgNi 0 A Max. peak inrush cutrrent (. ms) 00 A Max. switching voltage 0 V Max. AC load (Table ) A Max. DC load (Table ) Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/. W (DC) Ops. Res Cos 0. VAC Ω ma VDC Ω ma 99 K K 0 K. 0 K t KVA Max. DC Load Insulation Dielectric strength ( minute): Open contacts Insulation resistance at 00 V Insulation, IEC 0-:,000 V GΩ Ops. 0. AC a/b VA Operate time + bounce time 0 ms Release time + bounce time 0 ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C-W0X... VAC A B DC,,, 0 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-W0X...VDC C-W0DX...VDC C-W0FX...VDC C-W0BX... UC. FASTON. Lloyd s IEC 0 EN 09 0 B Fax: () -00 TURCK Minneapolis, MN

41 QRC -Pole, Miniature Plug-In Railway Relay S-C, S-L, S-P, S-PO, S-I/O A(+) A R-A0 Railway Application Relay According to EN 00--/99 - EN /99 0 A 0 V AC 0 A 0 V DC Materials: Standard, code 0 AgNi Optional, code AgNi + 0.µ Au Optional, code AgNi + 0µ Au 0 A Max. peak inrush current (0 ms) 0 A Max. switching voltage 0 V Max. AC load (Table ) Max. DC load (Table ) Ops. Amps. Table Electrical Life, ops. x Table 0 AC AC Cos AC Phi VA Max DC Load DC L/R 0ms Volts Coils Operation Range Power Consumption Power Consumption Generated transients Voltage Ω ± 0% ma Isolation 0. U n >0. U n.0 W OV, include FWD Polution grade PD With voltage (./0µs) / Dielectric strength ( minute) Contact coil KV/,0 V Between different poles KV/,0 V Between contacts on the same pole,0 V - C to +0 C Number of mechanical operations 0 million Thermic Class B (0 C) Vibration: Category/Class /B Body Mounted Vibration -0 Hz ( axes) Shock g ( axes) Operation (UN)/release time 0 ms/ ms g Relay + Socket g Relay Protection IP 0 A B Standard Types DC,,, 0 Free-wheeling diode R-A0D...VDC. FASTON Fax: () -00 TURCK Minneapolis, MN B0

42 MRC -Pole, Miniature Plug-In Railway Relay Ops. Amps. Table Electrical Life, ops. x Table 0 S-C, S-L, S-P, S-PO, S-I/O A(+) A AC AC Cos AC VA Max DC Load DC L/R 0ms Volts R-T Railway Application Relay According to EN 00--/99 - EN /99 A 0 V AC A 0 V DC Materials: Standard, code AgNi + 0.µ Au Optional, code AgNi + 0µ Au A Max. peak inrush current (0 ms) A Max. switching voltage 0 V Max. AC load (Table ) Max. DC load 00,000 ops. Coils Operation Range Power Consumption Power Consumption Generated transients Voltage Ω ± 0% ma Isolation U n >0. U n.0 W OV, include FWD Polution grade PD With voltage (. / 0µs)/Dielectric strength ( minute) Contact coil KV/,0 V Between different poles KV/,0 V Between contacts on the same pole,0 V - C to +0 C Number of mechanical operations 0 million Thermic Class B (0 C) Vibration: Category/Class /B Body Mounted Vibration -0 Hz ( axes) Shock g ( axes) Operation (UN)/release time 0 ms/ ms g Relay + Socket g Relay Protection IP 0 A B Standard Types DC,,, 0 Free-wheeling diode R-TD...VDC. FASTON. B Fax: () -00 TURCK Minneapolis, MN

43 QRC Miniature -Pole Plug-In Relay S9-M, S9-L, S9-P, S9-PO A(+) A Table Electrical Life, ops. x 0 C9-A General purpose Four pole, change-over contacts A 0 V AC A 0 V DC 0. A 0 V DC Materials: Standard, code AgNi + 0.µAu Optional, code AgNi + µau A Max. peak inrush current (. ms) A Max. switching voltage 0 V Max. AC load (Table ) 0 KVA Max. DC load (Table ) Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/ W (DC) Ops. Res VAC Ω ma VDC Ω ma 0 9 K 0. K 0 K. 0 K 0. 0 Table VA Max. DC Load Insulation Dielectric strength ( minute): Open contacts Between adjacent poles Insulation resistance at 00 V Insulation, IEC 0-:,000 V KV GΩ Amps. 0. Res 0 Volts 00 Operate time + bounce time 0 ms Release time + bounce time ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT g. 9 0 Standard Types AC 0 Hz, (0 Hz):,,,, (0), 0, (0) X = LED (standard) C9-AX... VAC DC,,,, 0 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C9-AX...VDC C9-ADX...VDC C9-AFX...VDC C9-ABX... UC. FASTON.0 IEC 0 EN Fax: () -00 TURCK Minneapolis, MN B0

44 MRC Miniature -Pole Relay C9-R Magnetic latching relay Two change-over contacts, A A 0 V AC A 0 V DC 0 A A ON (+) OFF (+) Materials: Standard, code AgNi + 0.µAu A Max. peak inrush current (0 ms) A Max. switching voltage 0 V Max. AC load (Table ) 00 VA Max. DC load (Table ) 0 A (-) 9 Table Electrical Life, ops. x 0 Coils ON pulse power OFF pulse power One winding for AC. Two windings for DC.. VA/W 0. VA/W Ops. Res VAC ON ma OFF ma VDC ON ma OFF ma Table VA Max. DC Load Insulation Dielectric strength ( minute): Open contacts Between adjacent poles Insulation resistance at 00 V Insulation, IEC 0-:,000 V KV KV GΩ / Amps. 0. Res 0 Volts Minimum, pulse length for ON/OFF 0 ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) C9-R... VAC DC,,, 0 C9-R...VDC. FASTON.0 Lloyd s IEC 0 EN 09 B Fax: () -00 TURCK Minneapolis, MN

45 QRC Miniature -Pole Relay S9-M, S9-L, S9-P, S9-PO C9-E General purpose. Sensitive 00 mw Two pole, change-over contacts DC operating range: 0.-. x U n A 0 V AC A 0 V DC 9 A(+) A Materials: Standard, code AgNi + 0,µAu Optional, code AgNi + 0µAu A Max. peak inrush current (. ms) A Max. switching voltage 0 V Max. AC load (Table ),00 VA Max. DC load (Table ) Table Electrical Life, ops. x 0 0 Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n 0. VA (AC)/0. W (DC) Ops. Res VAC Ω ma VDC Ω ma K K K9 K 0 0 K9. 0 K Table VA Max. DC Load Insulation Dielectric strength ( minute): Open contacts Between adjacent poles Insulation resistance at 00 V Insulation, IEC 0-:,000 V GΩ / Amps. 0.. Res 0 Volts Operate time + bounce time 0 ms Release time + bounce time ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT 0 g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C9-EX... VAC DC,,, 0 X = LED, no polarity (standard) Free-wheeling diode Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C9-EX...VDC C9-EDX...VDC C9-EFX...VDC C9-EBX... UC. FASTON.0 Lloyd s IEC 0 EN Fax: () -00 TURCK Minneapolis, MN B0

46 IRC Interface and General Applications S0, S0-P C0-A0 One pole, change-over contact 0 A 0 V AC 0. A 0 V DC 0 A 0 V DC 0. A 0 V DC A 0 V AC Ops. Amps Gap 0. mm. Table Electrical Life, ops. x 0 Table AC Cos VA Max. DC Load DC L/R 0ms Volts Materials: Standard, code 0 AgNi Optional, code AgNi + µ Au Optional, code AgSnO 0 A Max. peak inrush current (0 ms) 0 A Max. switching voltage 0 V Max. AC load (Table ) A Max. DC load (Table ) Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power Insulation Dielectric strength ( minute): Open contacts Between contact and coil Insulation resistance at 00 V Insulation, IEC 0-: 0. x U n 0. x U n. VA (AC)/0. W (DC) VAC Ω ma VDC Ω ma 90,00,00 9.,00. 0, ,900.,000 V KV GΩ KV/ Operate time + bounce time 0 ms Release time + bounce time ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection grade IP 0/RT g A A Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C0-A0X... VAC RC suppressor C0-A0R... VAC DC,,, 0 X = LED, no polarity (standard) C0-A0X...VDC Options (DC coils) Polarity and free-wheeling diodes C0-A0FX...VDC AC/DC bridge rectifier ( or V) C0-A0BX... UC FASTON. IEC 0 EN 09 B Fax: () -00 TURCK Minneapolis, MN

47 IRC Interface and General Applications S0, S0-P C0-G0 One pole, open contact 0 A 0 V AC 0. A 0 V DC 0 A 0 V DC 0. A 0 V DC Ops. Amps Gap mm. Table Electrical Life, ops. x 0 Table AC Cos VA Max. DC Load DC 0V DC 0V Volts Materials: Standard, code 0 AgNi Optional, code AgNi + µ Au Optional, code AgSnO 0 A Max. peak inrush current (0 ms) 0 A Max. switching voltage 0 V Max. AC load (Table ) A Max. DC load (Table ) Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power Insulation Dielectric strength ( minute): Open contacts Between contact and coil Insulation resistance at 00 V Insulation, IEC 0-: 0. x U n 0. x U n. VA (AC)/0. W (DC) VAC Ω ma VDC Ω ma 90,00,00 9.,00. 0, , V KV GΩ KV/ Operate time + bounce time 0 ms Release time + bounce time ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection grade IP 0/RT g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C0-G0X... VAC RC suppressor C0-G0R... VAC DC,,, 0 X = LED, no polarity (standard) Options (DC coils) Polarity and free-wheeling diodes AC/DC bridge rectifier ( or V) C0-G0X...VDC C0-G0FX...VDC C0-G0BX... UC IEC 0 EN Fax: () -00 TURCK Minneapolis, MN B0

48 IRC Interface and General Applications S0, S0-P C0-T One change-over twin contact A 0 V AC 0. A 0 V DC A 0 V DC 0. A 0 V DC Gap 0. mm. Materials: Standard, code AgNi + µ Au A Max. peak inrush current (0 ms) A Max. switching voltage 0 V Max. AC load (Table ). KVA Max. DC load (Table ) 0 Table Electrical Life, ops. x 0 Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/0. W (DC) AC VAC Ω ma VDC Ω ma Ops. 90,00,00 9.,00. 0, , Table VA Max. DC Load Insulation Dielectric strength ( minute): Open contacts Between contact and coil Insulation resistance at 00 V Insulation, IEC 0-:,000 V KV GΩ KV/ Amps 0. DC Volts Operate time + bounce time 0 ms Release time + bounce time ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC relays, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection grade IP 0/RT g A A Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C0-TX... VAC RC suppressor C0-TR... VAC DC,,, 0 X = LED, no polarity (standard) C0-TX...VDC Options (DC coils) Polarity and free-wheeling diodes C0-TFX...VDC AC/DC bridge rectifier (, or 0 V) C0-TBX... UC FASTON. IEC 0 EN 09 B Fax: () -00 TURCK Minneapolis, MN

49 IRC Interface and General Applications S, S-P C-A Two poles, change-over contacts A 0 V AC 0. A 0 V DC A 0 V DC 0. A 0 V DC Gap 0. mm. Materials: Standard, code AgNi + 0.µ Au Optional, code AgNi + µ Au A Max. peak inrush current (0 ms) A Max. switching voltage 0 V Max. AC load (Table ). KVA Max. DC load (Table ) Table Electrical Life, ops. x 0 Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/0. W (DC) Ops. VAC Ω ma VDC Ω ma 90,00,00 9.,00. 0, ,900. Table 0 Max. DC Load DC Insulation Dielectric strength ( minute): Open contacts Between adjacents poles Between contact and coil Insulation resistance at 00 V Insulation, IEC 0-:,000 V,000 V KV GΩ KV/ Amps Volts 0 00 Operate time + bounce time 0 ms Release time + bounce time ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC relays, 0 Mill. DC relays telectrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection degree IP 0/RT g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C-AX... VAC RC suppressor C-AR... VAC DC,,, 0 X = LED, no polarity (standard) Options (DC coils) Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-AX...VDC C-AFX...VDC C-ABX... UC IEC 0 EN Fax: () -00 TURCK Minneapolis, MN B0 9

50 IRC Interface and General Applications S, S-P C-G Two poles, open contacts A 0 V AC 0. A 0 V DC A 0 V DC 0. A 0 V DC Gap mm Materials: Standard, code AgNi + 0.µ Au Optional, code AgNi + µ Au A Max. peak inrush current (0 ms) A Max. switching voltage 0 V Max. AC load (Table ). KVA Max. DC load (Table ) Table Electrical Life, ops. x 0 Coils (Ohms 0 C) Pull-in voltage Drop-out voltage Nominal coil power 0. x U n 0. x U n. VA (AC)/0. W (DC) Ops. VAC Ω ma VDC Ω ma 90,00,00 9.,00. 0, ,900. Table 0 Max. DC Load DC Insulation Dielectric strength ( minute): Open contacts Between adjacents poles Between contact and coil Insulation resistance at 00 V Insulation, IEC 0-:,000 V,000 V KV GΩ KV/ Amps Volts 0 00 Operate time + bounce time 0 ms Release time + bounce time ms -0 C (no ice) to +0 C Mechanical life ops. 0 Mill. AC, 0 Mill. DC relays Electrical life at nominal load 00,000 ops. Operating frequency at nominal load,00/hour Protection grade IP 0/RT g Standard Types AC 0 Hz, (0 Hz):,,, (0), 0, (0) X = LED (standard) C-GX... VAC RC suppressor C-GR... VAC DC,,, 0 X = LED, no polarity (standard) Options (DC coils) Polarity and free-wheeling diodes AC/DC bridge rectifier (, or 0 V) C-GX...VDC C-GFX...VDC C-GBX... UC IEC 0 EN 09 0 B Fax: () -00 TURCK Minneapolis, MN

51 IRC Interface and General Applications CSS-DCP Solid state relay, PNP S0, S0-M, S0-P, S-0K DC inductive or resistive load switching Positive common output One open contact -0 VDC CSS-DCP +(-)A -(+)A Diagram - + Common Input, Polarity Protected Range of input voltage - VDC Drop-out voltage <. VDC Input current ± ma Current stabilizer Yes Peak inrush voltage protection IEC Level Output, Positive Common Max. output current A Max. output voltage 0 VDC Minimum output voltage VDC Max. drop voltage. VDC Max. leakage current at VDC <00 µa Max. overcurrent pulse A, 0 µs Pulse protection IEC Level Max. current at inverse voltage A Max. DC Load vs. Ambient Temperature A CSS-DCP Dielectric strengh input / output KV/ min. Operate time ms Release time, max. ms Working temperature, max. 0 C Storage temperature 0 C g ºC T amb. Applications To switch up to 0 VDC, heating elements electrovalves, motors, input/output signals on PLC s, solenoids, incandescent and fluorescent lamps, etc. Inductive loads must be shunted with an antiparallel diode. +(-)A - VCC -(+)A CSS DC-P - 0 VDC +(-)A - VCC -(+)A CSS DC-P - 0 VDC Fax: () -00 TURCK Minneapolis, MN B0

52 IRC Interface and General Applications CSS-DCN Solid state relay, NPN S0, S0-P DC inductive or resistive load switching Negative common output One open contact -0 VDC CSS-DCN +(-)A -(+)A Diagram + - Common Input, Polarity Protected Range of input voltage - VDC Drop-out voltage <. VDC Input current ± ma Current stabilizer Yes Peak inrush voltage protection IEC Level Output, Positive Common Max. output curren A Max. output voltage 0 VDC Minimum output voltage VDC Max. drop voltage. VDC Max. leakage current at VDC <00 µa Max. overcurrent pulse A, 0 µs Pulse protection IEC Level Max. current at inverse voltage A Max. DC Load vs. Ambient Temperature A CSS-DCN Dielectric strengh input / output KV/ min Operate time ms Release time, max. ms Working temperature, max. 0 C Storage temperature 0 C Weigth avg. g ºC T amb. Applications To switch, up to 0 VDC, heating elements electroalves, motors, input/output signals on PLC s, solenoids, incandescent and fluorescent lamps, etc. Inductive loads must be shunted with an antiparallel diode. +(-)A - VCC -(+)A CSS DC-P - 0 VDC +(-)A - VCC -(+)A CSS DC-P - 0 VDC B Fax: () -00 TURCK Minneapolis, MN

53 IRC Interface and General Applications S0, S0-P CSS-AC Solid state relay AC inductive loads switching One open contact -0 VAC, 0/0 Hz Input, Polarity Protected Range of input voltage - VDC Drop-out voltage <. VDC Input current - ma Current stabilizer Yes Peak inrush voltage protection IEC Level CSS-AC +(-)A -(+)A Diagram Ouput, Instantaneous Max. output current Minimum output current Max. output voltage Minimum output voltage Max. drop voltage Max. leakage current Max. Dv/dt I t for 0 ms. fuse A 0 ma 0 VAC VAC <. VAC 0. ma 00 V/µs 0 A/s Max. AC Load vs. Ambient Temperature A CSS-AC ºC T amb. Dielectric strength input/output KV/min. Operate time / cycle Release time ms + / cycle Working temperature, max. 0 C Storage temperature, max. 0 C g Applications Suitable to switch inductive loads up to A/0 VAC. In switching loads with a high inrush or overcurrent (max. Di/dt 0 A/µs) such as transformers, motors or fluorescents, the maximum output current limit is A. +(-)A - VCC -(+)A CSS AC 0 VAC +(-)A - VCC -(+)A CSS AC M 0 VAC Fax: () -00 TURCK Minneapolis, MN B0

54 IRC Interface and General Applications S0, S0-P CSS-AZ Solid state relay AC resistive loads switching One open contact -0 VAC, 0/0 Hz Input, Polarity Protected Range of input voltage - VDC Drop-out voltage <. VDC Input current - ma Current stabilizer Yes Peak inrush voltage protection IEC Level CSS-AZ +(-)A -(+)A Z Diagram Ouput, Synchronized to Zero Max. output current Minimum output current Max. output voltage Minimum output voltage Max. drop voltage Max. leakage current Max. Dv/dt I t for 0 ms. fuse A 0 ma 0 VAC VAC <. VAC 0. ma 00 V/µs 0 A/s Max. DC Load vs. Ambient Temperature A CSS-AZ Dielectric strength input/output KV/min. Operate time / cycle Release time ms + / cycle Working temperature, max. 0 C Storage temperature, max. 0 C g ºC T amb. Applications Switches AC resistive loads up to A/0 VAC in the zero point of the tension and avoids any overcurrent peak in the connection. Suitable to switch resistors, incandescent lamps, signalling, etc. Not suitable for inductive loads. +(-)A - VCC -(+)A CSS AZ 0 VAC +(-)A - VCC -(+)A CSS AZ RES 0 VAC B Fax: () -00 TURCK Minneapolis, MN

55 Notes: Fax: () -00 TURCK Minneapolis, MN B0

56 SOCKETS B Fax: () -00 TURCK Minneapolis, MN

57 MRC Socket for Universal -Pin Relays S-B Two pole, one level, coding ring Integrated clip and marking label 0 A 00 V Socket for MRC, -Pin Plug-In Relay Types C-A, C-G, C-T Accepts the exclusive RELECO coding ring for coding both relay and socket DIN rail or panel mountable Removable label EN/DIN and sequencial numbering Wiring Diagram According to EN 09- and IEC 0- ( A) ( ) ( ) ( ) ( ) ( ) ( A) ( ) Nominal Load: Insulation: Dielectric strength, minute Between all terminals and rail DIN Between adjacent poles 0 A/00 V ø. Wire In-Lets Capacity: Solid wire mm or x. mm Multi-core - AWG Ferrule tip terminals mm Max. screw torque. Nm Screw dimensions M, Pozi Integrated hold-down clip Removable marking label ø. Lloyd s M 9. RELECO S-B A A Fax: () -00 TURCK Minneapolis, MN B0

58 MRC PC Sockets for Relays C- and C- S-L S-PO -Pole Flange Panel Mountable -Pole Printed Circuit with Flange S-L S-PO -Pole Flange Panel Mountable -Pole Printed Circuit with Flange S-L S-PO S-L S-PO Nominal Load Dielectric Strength Adjacent Pin 0 A/00 V Nominal Load Dielectric Strength Adjacent Pin 0 A/0 V Printed Circuit Lay-Out Printed Circuit Lay-Out ϒ ϒ ϒ ø.. ø ø 9. S-L ø 9. S-L 0. 9 S-PO S-PO B Fax: () -00 TURCK Minneapolis, MN

59 MRC Socket for Universal -Pin Relays S-S Three pole, two level, coding ring Integrated clip and marking label 0 A 0 V Socket for MRC, -Pin Plug-In Relay Types C-A, C-G, C-T, C-X, C-M, C-R, C-E, C-N Accepts the exclusive RELECO coding ring for coding both relay and socket. DIN rail or panel mountablel EN/DIN and sequencial numbering Wiring Diagram According to EN 09- and IEC 0-0(A) ( ) 9( ) ( ) ( ) ( ) ( ) Nominal Load: 0 A/0 V ( A) ( ) ( ) ( ) Insulation: Dielectric strength, minute Between all terminals and rail DIN Between adjacent poles ø. Wire In-Lets Capacity: Solid wire mm or x. mm Multi-core - AWG Ferrule tip terminals mm Max. screw torque. Nm Screw dimensions M, Pozi Integrated hold-down clip Removable marking label. ø. M 0 M. 0 9 RELECO S-S 0 0 A A Fax: () -00 TURCK Minneapolis, MN B0 9

60 MRC Socket for Universal -Pin Relays S-B Three pole, one level, coding ring Integrated clip and marking label 0 A 0 V Socket for MRC, -Pin Plug-In Relays Types C-A, C-G, C-T, C-X, C-M, C-R, C-E, C-N Accepts the exclusive RELECO coding ring for coding both relay and socket. DIN rail or panel mountable Removable label EN/DIN and sequencial numbering Wiring Diagram According to EN 09- and IEC 0-9( ) 0(A) ( ) ( ) ( A) ( ) ( ) ( ) ( ) ( ) ( ) Nominal Load: Insulation: Dielectric strength, minute Between all terminals and rail DIN Between adjacent poles 0 A/0 V ø. Wire In-Lets Capacity: Solid wire mm or x. mm Multi-core - AWG Ferrule tip terminals mm Max. screw torque. Nm Screw dimensions M, Pozi Integrated hold-down clip Removable marking label ø RELECO S-B A A 9 0 Lloyd s M 0 B Fax: () -00 TURCK Minneapolis, MN

61 MRC Socket for Universal -Pin Relays S-J Four pole, two level, logic wiring Integrated clip and marking label 0 A 0 V Socket for MRC, -Pin Plug-In Relay Types C-A, C-X, C-R DIN rail or panel mountable Removable label EN/DIN and sequencial numbering According to EN 09 + EN 0 Wiring Diagram Nominal Load: Insulation: Dielectric strength, minute Between all terminals and rail DIN Between adjacent poles 0 A/0 V ø 9 Wire In-Lets Capacity: Solid wire mm or x. mm Multi-core - AWG Ferrule tip terminals mm Max. screw torque. Nm Screw dimensions M, Pozi Integrated hold-down clip Removable marking label ø. Lloyd s M/M RELECO S-B A Fax: () -00 TURCK Minneapolis, MN B0

62 MRC PC Sockets for Relays C- and C- S-L S-PO -Pole Flange Panel Mountable -Pole Printed Circuit with Flange S-L S-P S-PO -Pole Flange Panel Mountable -Pole Printed Circuit -Pole Printed Circuit with Flange S-L S-PO S-L S-P S-PO Nominal Load Dielectric Strength Adjacent Pin 0 A/0 V Nominal Load Dielectric Strength Adjacent Pin A/00 V KV Printed Circuit Lay-Out ø Printed Circuit Lay-Out. ø M S-PO S-L... M S-PO S-L... RELECO S-L. S-P S-P RELECO S-P B Fax: () -00 TURCK Minneapolis, MN

63 MRC Socket for Square Socket Relays C- S-S Three pole, two level, logic wiring Integrated clip and marking label A 00 V Socket for MRC, -Pin Plug-In Relay Types C-A, C-G, C-X, C-M, C-M, C-R DIN rail or panel mountable Removable label EN/DIN and sequencial numbering According to EN 09- and IEC 0- Wiring Diagram 9 ( ) B (A) ( ) ( ) ( ) ( ) ( ) () A (A) ( ) ( ) Nominal Load: Insulation: Dielectric strength, minute Between all terminals and rail DIN Between adjacent poles A/00 V KV KV KV ø. Wire In-Lets Capacity: Solid wire mm or x. mm Multi-core - AWG Ferrule tip terminals mm Max. screw torque. Nm Screw dimensions M, Pozi Integrated hold-down clip Removable marking label. 9. ø. M. RELECO S-S A B A A Fax: () -00 TURCK Minneapolis, MN B0

64 MRC Socket for Miniature Two Pole C- S-M Three pole, three level, logic wiring Integrated clip and marking label A 00 V Socket for MRC, -Pin Plug-In Relay Types C-A, C-A, C-G, C-X, C-M, C-M, C-R DIN rail or panel mountable Removable label EN/DIN and sequencial numbering Wiring Diagram Nominal Load: Insulation: Dielectric strength, minute Between all terminals and rail DIN Between adjacent poles A/00 V KV KV KV Wire In-Lets Capacity: Solid wire mm or x. mm Multi-core 0, AWG Ferrule tip terminals mm Max. screw torque. Nm Screw dimensions M., Pozi Integrated hold-down clip Removable marking label B Fax: () -00 TURCK Minneapolis, MN

65 QRC Socket for Miniature Two Pole C- S-C Two pole, one level Integrated clip and marking label 0 A Socket for QRC, -Pole Plug-In Relay Types C-A, C-T, C-G, C-X, C-W DIN rail or panel mountable Removable label EN/DIN and sequencial numbering Bridge bar connection in A Wiring Diagram Nominal Load: 0 A Insulation: Dielectric strength, minute Between all terminals and rail DIN Between adjacent poles Wire In-Lets Capacity: Solid wire mm or x. mm Multi-core, AWG Ferrule tip terminals mm Max. screw torque 0. Nm Screw dimensions M, Pozi Integrated hold-down clip Removable marking label Lloyd s Fax: () -00 TURCK Minneapolis, MN B0

66 MRC Socket for Miniature C- Relays S-I/O Two pole, two level Integrated clip and marking label 0 A 0 V Socket for QRC, -Pole Plug-In Relay Types C-A, C-T, C-, C-X, C-W DIN rail or panel mountable Removable label EN/DIN and sequencial numbering According to EN 09- and IEC 0- Wiring Diagram Nominal Load: Insulation: Dielectric strength, minute Between all terminals and rail DIN Between adjacent poles 0 A/0 V Wire In-Lets Capacity: Solid wire mm or x. mm Multi-core - AWG Ferrule tip terminals mm Max. screw torque. Nm Screw dimensions M, Pozi Integrated hold-down clip Removable marking label Lloyd s B Fax: () -00 TURCK Minneapolis, MN

67 QRC Socket for Miniature C-A0 Relays S- One pole, one level Integrated clip and marking label A 0 V Socket for MRC, -Pole Plug-In Relay Types C-A0 DIN rail or panel mountable Removable label EN/DIN and sequencial numbering According to EN 09- and IEC 0- Wiring Diagram (A) () (A) M o d u l e S- for use with C-A0 (A) () () Nominal Load: Insulation: Dielectric strength, minute Between all terminals and rail DIN Between adjacent poles A/0 V Wire In-Lets Capacity: Solid wire mm or x. mm Multi-core - AWG Ferrule tip terminals mm Max. screw torque. Nm Screw dimensions M, Pozi Integrated hold-down clip Removable marking label Lloyd s RELECO S- A A Fax: () -00 TURCK Minneapolis, MN B0

68 MRC PC Sockets for Relays C- and C9- S-P S-PO -Pole Flange Printed Panel Circuit Mountable -Pole Printed Circuit with Flange S9-P S9-PO -Pole Printed Circuit -Pole Printed Circuit with Flange S-P S-PO S9-PO S9-P Nominal Load Dielectric Strength Adjacent Pin 0 A/0 V Nominal Load Dielectric Strength Adjacent Pin A/0 V Printed Circuit Lay-Out Printed Circuit Lay-Out ø.. ø. S-PO. M... M S9-PO RELECO S-L B A RELECO S9-L S-P S9-P 0 RELECO. S-P B A 0 0 RELECO 9 S9-P... Lloyd s. Lloyd s B Fax: () -00 TURCK Minneapolis, MN

69 QRC Sockets for Miniature Four Pole C9- S9-M Four pole, two level Integrated clip and marking label A 0 V Socket for QRC, -Pole Plug-In Relay Types C9-A, C9-E, C9-R DIN rail or panel mountable EN/DIN and sequencial numbering According to EN 09- and IEC 0- Wiring Diagram Nominal Load: Insulation: Dielectric strength, minute Between all terminals and rail DIN Between adjacent poles A/0 V 000 V A A 0 9 S9-M 0 9 RELECO. 0.. Wire In-Lets Capacity: Solid wire mm or x. mm Multi-core - AWG Ferrule tip terminals mm Max. screw torque. Nm Screw dimensions M, Pozi Integrated hold-down clip Removable marking label Lloyd s Fax: () -00 TURCK Minneapolis, MN B0 9

70 IRC Interface and General Applications S0 Socket for C0 and CSS relays DIN rail or panel mountable 0 A 0 V Interface I/O socket, with terminals in-line for relays C0-A, C0-G, C0-T, CSS Wiring Diagram Poles Nominal load 0 A/0 V Dielectric strength Coil - contacts KV Terminals - Rail KV Max. screw torque. Nm Multi-core capacity - AWG Solid wire capacity mm or x. mm Weight average g Other Aspects Hard brass tin-plated terminals Brass zinc-plated solid screws Integrated clip Removable marking label Ø. Ø. 9. Ø. Accessories Bridge bar for coil and movable contact (S0-BB) Integrated clip DIN rail or panel mounting Maximum current through bridge 0 A Maximum current input common cable 0 A A A A. M. Bridge Bus Bar S0-BB 0 B Fax: () -00 TURCK Minneapolis, MN

71 IRC Interface and General Applications S0-P Printed circuit socket for pole IRC Relays S-P Printed circuit socket for -pole IRC Relays Nominal load Dielectric strength, min. Coil terminals to contacts Hard brass tin-plated terminals Integrated hold-down clip 0 A/0 V KV 0. x mm Nominal load Dielectric strength min. Coil terminals to contacts Hard brass tin-plated terminals Integrated hold-down clip A/0 V KV 0. x mm IEC 0 EN Fax: () -00 TURCK Minneapolis, MN B0

72 IRC Interface and General Applications S I/O socket for IRC relays two pole, change-over contacts A I/O socket with terminals in-line, for relays C, CG Din or panel mountable Removable label According to EN 09 and IEC 0 Wiring Diagram (A) (A) (A) 9() () () () () () Poles Two change-over contacts Nominal load A/0V Insulation: Between coil and contacts KV Between every terminal and DIN rail KV Between adjacent contacts KV Max. screw torque. Nm Wire in-lets multi-core capacity - AWG Solid wire or ferrule tips capacity mm Solid terminals of zinc-plated brass Integrated hold-down clip Removable marking label Ø 0... Ø. 9. Ø B Fax: () -00 TURCK Minneapolis, MN

73 TIMERS Fax: () -00 TURCK Minneapolis, MN B0

74 9 TIME CUBE and -Pin, Time Cube The modules CT and CT are electronic timers that are designed to be inserted beween a standard plug-in relay and its socket, enabling the relay to be operated as a timer relay. The CT modules are able to accept any standard or -Pin RELECO series C or C as well as those from any other supplier. The relay coil voltage must be in the range shown for each model. CT A Off delay CT A The timing starts when S is switched off. The relay drops out at time (t). CT B Blinker CT B The relay blinks ON/OFF at time (t) when switch S is closed. First pulse, ON. CT E On delay CT E The timing starts when the switch S is closed. The relay pulls in at the time (t). R Function A R Function B R Function E 0 () S S + ~ t S R 0 () S ~ + t t t S R 0 () S + ~ t S R CT -A0/S* V CT -A0/L...0- V CT -A0/M V CT -A0/U...0- V CT -A0/S* V CT -A0/L...0- V CT -A0/M V CT -A0/U...0- V *All types are for AC/DC except S voltage range (only DC) CT -B0/S* V CT -B0/L...0- V CT -B0/H V CT -B0/S* V CT -B0/L...0- V CT -B0/H V CT -E0/S* V CT -E0/L...0- V CT -E0/H V CT -E0/S* V CT -E0/L...0- V CT -E0/H V CT... (-Pin) and CT... (-Pin) types with time range from 0. seconds to 0 minutes (range 0) Time accuracy Repetition +0.%/0 ms Supply voltage ms / volt. Reset time (types E, W, B) <00 ms Reset time (types A, K) <0 ms Triggering time: AC, 0 ms; DC, 0 ms - C to +0 C Transient protection IEC. Housing material Lexan Protection class (DIN 000) IP 0 g Time Range Setting Range 0 Dip - Sw 0.- s -0 s 0.- min -0 min Dimensions B Fax: () -00 TURCK Minneapolis, MN

75 9 TIME CUBE and -Pin, Time Cube The modules CT and CT are electronic timers that are designed to be inserted beween a standard plug-in relay and its socket, enabling the relay to be operated as a timer relay. The CT modules are able to accept any standard or -Pin RELECO series C or C as well as those from any other supplier. The relay coil voltage must be in the range shown for each model. CT K One shot, aux. pulse CT K The relay turns ON with a pulse on the switch S and turns OFF at the time (t). R Function K CT W CT W One shot The relay turns ON as switch S is closed and turns OFF at the time (t). R Function W 0 () S ~ + S t S R 0 () S ~ + t S R CT -K0/S* V CT -K0/L...0- V CT -K0/M V CT -K0/U V CT -K0/S* V CT -K0/L...0- V CT -K0/M V CT -K0/U V CT -W0/S* V CT -W0/L...0- V CT -W0/H V CT -W0/S* V CT -W0/L...0- V CT -W0/H V *All types are for AC/DC except S voltage range (only DC) CT... (-Pin) and CT... (-Pin) types with time range from 0. seconds to 0 minutes (range 0) Time accuracy Repetition +0.%/0 ms Supply voltage ms / volt. Reset time (types E, W, B) <00 ms Reset time (types A, K) <0 ms Triggering time: AC, 0 ms; DC, 0 ms - C to +0 C Transient protection IEC. Housing material Lexan Protection class (DIN 000) IP 0 g Time Range Setting Range 0 Dip - Sw 0.- s -0 s 0.- min -0 min Dimensions Fax: () -00 TURCK Minneapolis, MN B0

76 Notes: B Fax: () -00 TURCK Minneapolis, MN

77 USA TURCK Inc. 000 Campus Drive Minneapolis, MN Phone: () -00 Fax: () -00 Application Support: MEXICO TURCK MEXICO S. DE R.L. DE C.V. Carr. Saltillo-Zacatecas km. s/n Parque Industrial La Angostura Saltillo, COAH. C.P. 00 Mexico Phone: + () -0/ Fax: + () -9 Local Toll Free: ventasmexico@turck.com CANADA CHARTWELL ELECTRONICS, INC. 0 Duffield Drive Markham, Ontario Canada, LG B Phone: (90) -00 Fax: (90) -0 Toll Free: ---9 AUSTRALIA TURCK Australia Pty. Ltd. Unit, - Gilda Court Mulgrave, Victoria 0 Australia Phone: (+) Fax: (+) 90 0 Local Toll Free: 00 turckaustralia@turck.com GERMANY WORLD HEADQUARTERS Hans TURCK GmbH & Co. KG Witzlebenstrasse D- Muelheim an der Ruhr Federal Republic of Germany Phone: (+9) Fax: (+9) Printed in USA 0 by TURCK. All rights reserved. No part of the publication may be reproduced without written permission. B0 / Fax: () -00 TURCK Minneapolis, MN B0