CGI commands V JPEG image commands. 2. System commands

Transcription

1 CGI commands V JPEG image commands 1.1 Get one JPEG image URL: Return: One JPEG image will be transferred to client. 1.2 Get one JPEG image without any authentication URL: Return: One JPEG image will be transferred to client. Note: User maybe change the loginfree filename. 1.3 Get one JPEG video stream URL: Return: One multipart JPEG video stream will be transferred to client. Format: HTTP/ OK Content-Type: multipart/x-mixed-replace; boundary=myboundary --myboundary Content-Type: image/jpeg Content-Length: <JPEG image data> --myboundary Content-Type: image/jpeg Content-Length: <JPEG image data> --myboundary Content-Type: image/jpeg Content-Length: <JPEG image data> --myboundary System commands 2.1 Get system information and configuration Get image properties supported by camera &group=properties.image Return: Image resolution, rotation and format supported by camera root.properties.image.rotation=0 root.properties.image.resolution=640x480,320x240,176x144 root.properties.image.format=jpeg,mjpeg Description: Camera doesn t support rotation, supports 3 kinds of resolution and supports JPEG format only.

2 2.1.2 Get current camera configuration of resolution and JPEG quality &group= Image.I0.Appearance Return: Current configuration of resolution and JPEG quality root.image.i0.appearance.resolution=640x480 root.image.i0.appearance.compression=0 Compression: value range is 0~100 0: Highest quality, large image size 100: Lowest quality, small image size Get current FPS value of camera &group= Image.I0.Stream Return: Current FPS value of camera (frame rate per second) Image.I0.Stream.FPS= Get current configuration of camera sensor &group= ImageSource.I0.Sensor Return: Current brightness and contrast SaturationHue value ImageSource.I0.Sensor.Brightness=50 ImageSource.I0.Sensor.Contrast=50 ImageSource.I0.Sensor.Saturation=50 ImageSource.I0.Sensor.Hue=50 Brightness and Contrast SaturationHue value range is 0~ Get default video format &group=layout Return: Camera default video format Layout.DefaultVideoFormat=mjpeg Get information about the brand &group=brand Return: Information about the brand and type of camera root.brand.brand=edimax root.brand.prodfullname=edimax IC-1500/IC-1510 Network Camera root.brand.prodshortname=edimax IC-1500/IC-1510 root.brand.prodnbr=ic-1500/ic-1510 root.brand.prodtype=network Camera root.brand.weburl= Get hardware MAC address of camera

3 &group= Network.Interface.I0.Active.MACAddress Return: Hardware MAC address of camera Network.Interface.I0.Active.MACAddress=00:11:09:15:10:AB Get Firmware Version, Model ID and Vendor ID &group=properties.firmware Return: Firmware version, Model ID and Vendor ID of camera Properties.Firmware.Version=v1.32 Properties.Firmware.ModelID=8 Properties.Firmware.VendorID= Get web port number &group= System.HTTPPort Return: web port number System.HTTPPort= Get private video port number &group= System.PrivateVideoPort Return: web port number System.PrivateVideoPort= Get MaxUsers and CurrentUsers Number &group= Properties.VideoServer Return: MaxUsers and CurrentUsers Number Properties.VideoServer.MaxUsers=16 Properties.VideoServer.CurrentUsers= Get FTP Server &group=network.ftp.server Return: FTP Server Network.FTP.Server= Get FTP Username &group=network.ftp.user Return: FTP Username Network.FTP.User=test

4 Get FTP Password &group=network.ftp.passwd Return: FTP Password Network.FTP.Passwd=test Get FTP Path &group=network.ftp.path Return: FTP Path Network.FTP.Path=/ Get FTP Port &group=network.ftp.port Return: FTP Port Network.FTP.Port= Set system configuration 2.2.1: Set resolution of camera &Image.I0.Appearance.Resolution=Width X Height Parameters: 640x480, 320x240, 176x144 Set resolution to 320X240 &Image.I0.Appearance.Resolution=320x : Set JPEG compression level &Image.I0.Appearance.Compression=Compression Level Parameters: 0~100, 0: Highest quality, large image size 100: Lowest quality, small image size Set compression level to 90 &Image.I0.Appearance.Compression= Set camera FPS &Image.I0.Stream.FPS=FPS Parameters: 1, 3, 5, 10, 15, 20, 25, 30 Set FPS to 20 &Image.I0.Stream.FPS=20

5 2.2.4 Set brightness of camera sensor &ImageSource.I0.Sensor.Brightness=Brightness Level Set brightness to 60 &ImageSource.I0.Sensor.Brightness= Set contrast of camera sensor &ImageSource.I0.Sensor.Contrast=Contrast Level Set contrast to 60 &ImageSource.I0.Sensor.Contrast= Set saturation of camera sensor &ImageSource.I0.Sensor.Saturation=Saturation Level Set saturation to 50 &ImageSource.I0.Sensor.Saturation= Set hue of camera sensor &ImageSource.I0.Sensor.Hue=Hue Level Set hue to 50 &ImageSource.I0.Sensor.Hue= Set FTP Server &Network.FTP.Server=Server Parameters: FTP Server Set FTP Server to &Network.FTP.Server= Set FTP Username &Network.FTP.User=Username Parameters: FTP Username Set FTP Username to test &Network.FTP.User=test Set FTP Password

6 &Network.FTP.Passwd=Password Parameters: FTP Password Set FTP Password to test &Network.FTP.Passwd=test Set FTP Path &Network.FTP.Path=Path Parameters: FTP Path Set FTP Path to / &Network.FTP.Path=/ Set FTP Port &Network.FTP.Port=Port Parameters: FTP Port Set FTP Port to 21 &Network.FTP.Port=21