ID Photo Processor. Batch photo processing. User Guide

Size: px
Start display at page:

Download "ID Photo Processor. Batch photo processing. User Guide"

Transcription

1 ID Photo Processor Batch photo processing User Guide 2015

2 Akond company , Russia, St.-Petersburg, Serdobolskaya, 65a Phone/fax: +7(812) Cell: +7(921) ID Photo Processor User Guide A.V. Povarkova Information in this document is subject to change without notice. This document is a property of A.V. Povarkova. It may be copied or transmitted to a third party only in its complete form with no omissions; all trade marks and copyrights be preserved. Any changes or amendments shall be agreed upon in writing with A.V. Povarkova. 2

3 Content Introduction 4 Software package and PC requirements 4 Software installation 4 ID Photo Processor operation 8 About company 26 3

4 1. INTRODUCTION Thank you for purchasing ID Photo Processor! ID Photo Processor is designed for batch photo processing (automatic face detection and crop). ID Photo Processor provides fast and accurate face finding on the source images, and face cropping according to the settings made by the user. ID Photo Processor can work as TWAIN driver and as stand alone application. 2. SOFTWARE PACKAGE AND PC REQUIREMENTS Software package includes the following: 1. Setup file (idphotoprocessor.exe), 2. User guide (IDPhotoProcessor_Userguide.pdf file), 3. Serial number to activate the software. PC requirements: Windows 2000, XP, Vista, Windows 7, Windows 8 Free 20MB on hard disk for inphoto Capture software files, If the software is supplied with the USB dongle your computer shall have the free USB port. 3. SOFTWARE INSTALLATION ID Photo Processor installation Run idphotoprocessorsetup.exe and follow the instructions you will get. Activate your license using on-line or off-line activation and enjoy working with ID Photo Processor. ID Photo Processor activation 4

5 When Software is installed and run for the first time the following window will be displayed: Figure 1. Activation window. Your have three options: Continue to use the software in the trial/demo mode, Activate the software, Close the software. Use Software in trial/demo mode: After the software is installed for the first time it can be used free for 30 days without activation. The trial period allows you to evaluate the software and make decision on purchasing it. The trial software has the following limitations: DEMO print will be typed on the processed images. When the Software is used in trial/demo mode the following information is displayed in the About window: "This product is not activated". 5

6 When your trial period is over the Continue with Demo button becomes not active and in order to continue using Software you shall activate it. For this press Activate Application button. On-line activation When you press Activate Application button the application will attempt to connect to server for on-line activation. If the attempt is successful the on-line activation window will be displayed. Figure 2. Online activation. You shall enter the serial number you received from your software supplier after payment and press Activate. The Software will be activated and you will get the correspoding message ("Thank you for taking time to activate your copy of application"). After the software is activated the serial number will be displayed in the About window. 6

7 If the application fails to connect to server for software activation (it happens if your computer does not have Internet connection), the offline activation window will be displayed (see Figure 3). Here you shall enter the software serial number you received from your software supplier after payment and press Generate. The activation code for your copy of the software will be generated. Write it down. Figure 3. Offline activation. Then using a different PC connected to Internet go to enter the serial number and activation code and press Activate (see Figure 4). 7

8 Figure 4. Attention! Make sure to enter the serial number and activation code with the dashes! The Authentication code for your copy of the software will be generated. Enter this code to the corresponding fields of the Off-line activation window (see Figure 4) and press Activate. The Software will be activated. The Thank You! window will be displayed. After the software is activated the serial number will be displayed in the About window. If you get the error message please check the serial number you entered, make necessary corrections, and press Activate. If you still get the error message contact your software supplier. 4. ID PHOTO PROCESSOR OPERATION ID Photo Processor: what is it? ID Photo Processor software is designed for batch ID photo processing. ID Photo Processor provides fast and accurate face finding on the source images, and face cropping according to the settings made by the user. 8

9 ID Photo Processor recognizes a human face on the original image and crops the face area (the face itself and surrounding area). Thus the perfect identification photo is automatically produced. If you have a database of varying sized photos and wish to produce the ID cards with consistent image dimensions ID Photo Processor will do this job easily. Run ID Photo Processor and it will do the following: Open the original images one by one, Find the human face on each image, Crop the face area to get the pre-set image dimensions Transfer the cropped photos to TWAIN application Or Save the cropped photos to the target folder. ID Photo Processor menu ID Photo Processor menu includes four sections: File, Explorer, Actions, Capture. Options dialogue box Menu File Options displays Options dialogue box. The Options dialogue box has 6 tabs. On the General tab it is possible to select the options of ID Photo Processor start up and close process (see Figure 5). 9

10 Figure 5. Options dialogue box, General tab. If Close after processing box is checked the ID Photo Processor will be closed after the processed image is saved or transferred to the TWAIN compatible application. Check Hide to tray instead of close box to hide ID Photo Processor to tray when it is closed. It reduces the software activation time for the next image processing. Check / uncheck User Interface Settings to show or hide the Control Panel buttons. The Save file tab (see Figure 6) is used to define the save to file settings. It is possible to select the folder to save processed photos upon pressing Process to file button. 10

11 Figure 6. Options dialogue box, Save file tab. You can select the File options: remove original photos, overwrite them, etc. On this tab it is also possible to set the JPEG image quality and set the size limit and resolution for the resulting photo. You can select the file format from the drop down list (Destination format). If you select As is all modified files will be saved in the same file format as the source files. You can also select the folder where the processed photos will be saved. There are two options: 1. Place the processed files in the source folder: the processed (cropped) photos will be saved in the source folder. They can overwrite the original images, or can be converted to a different file format, or can be saved with a different name selected by the user. 2. Place the processed files in the specified folder: the processed (cropped) photos will be saved in a different folder. You can 11

12 select a destination folder or create a new one. If you wish to save the ID photos in a new folder, first create a folder on the PC disk and select it using the Browse command. The photo files will be saved with the original names. Files are always saved with the name of the original file. For JPEG files all EXIF information (tags) remains unchanged. The processed files will have same Exif as original file. Resolution information can also be converted to PNG and TIFF formats, and vice versa. File options Check Remove original files, and the original images will be removed. The original images are removed only if they are successfully processed (cropped). If the image processing fails, the source image will not be removed. Use this option with care! If the image processing is fully automatic the errors in face finding and crop may happen, and the original image will be lost! If you wish to overwrite the original images with the processed ID photos select Replace in Overwrite existing files drop down list. If you wish to save the source images select Skip in Overwrite existing files drop down list. The processed (cropped) image will not be saved, the next images processing will be continued. You can process the skipped images later. If you select Ask in Overwrite existing files drop down list, ID Photo Processor will ask you before to overwrite the source images with the processed ID photos. The Explorer tab (see Figure 7) is used to set the Explorer settings. 12

13 Figure 7. Options dialogue box, Explorer tab. The External tools tab (see Figure 8) is used to add External tools (external software) to send the processed / original photos for additional processing. Read more about External tools below. Figure 8. Options dialogue box, External tools tab. 13

14 The Language tab provides an ability to select the software language. New language settings will take effect after the software is restarted. The current version of ID Photo Processor supports 4 languages: English, French, Dutch, and Russian. The Processing tab (see Figure 9) contains controls to set up face detection and image processing options. Figure 9. Options dialogue box, Processing tab. Check Image Processing to enable image processing after the image is opened. The Show Processing Window group includes the following options: Never: the image processing windows will not be displayed (will be skipped off), and the image will be processed according to the last settings made. If the face has not been found automatically the full image will be saved. Use this option if the original images are good, i.e. the human face is clear, sharp, well located on the image, and the gaps between the face and the image frames are big enough. 14

15 Always: the Image Processing window is always displayed, and the user will have an ability to adjust the image processing setting if necessary. Use this option if you wish to have the full control over the photo processing. You will see the automatically processed photo and will be able to change the processing settings on each image. Show if necessary: the image processing windows is displayed when necessary, e.g. when the face is not recognized on the image, when the face is too close to the image frame, etc. If the face is found and cropped successfully, the image processing window is not displayed. WARNING! If you are not yet familiar with the software operation and use it for the first time we recommend select Always. Check Auto Face Detection to activate the automatic face recognition and detection. Menu Explorer: here you can select the Explorer settings. Menu Actions: here you see the list of Actions (External tools) created. Menu Capture duplicated the photo Processing options. ID Photo Processor window 15

16 Figure 10. ID Photo Processor window ID Photo Processor (Figure 10) window has two main areas: Explorer The Explorer area shows the image files and image folders. In the Explorer area you can select images or folders to be processes. ID Photo Processor supports the following file formats: JPEG, PNG, TIFF, GIF, BMP. Control Panel By default the Control Panel has 6 controls: Process to TWAIN, Process to file, Process to Clipboard, Processing settings, Profile and Close. Click Process to TWAIN to send the processed images to TWAIN compatible application. In order to use this option you shall start ID Photo Processor from a TWAIN compatible application (Adobe Photoshop, XnView, Incardex, and others). Process to TWAIN button 16

17 will be disabled (grayed out) if ID Photo Processor is started as stand alone application. Click Process to file to save processed photos to files. Click Process to C lipboard to save processed photos to the clipboard. Click Processing settings to display the ID Image Processing window. In this window you will be able to setup the face crop and image enhancement settings. They will be saved and used by ID Photo Processor to process the images. Click Profiles button to select the required User Profile from a list of all profiles available. Read more about Profiles below. ID Image Processing window To display ID Image Processing window click Processing settings button on the Control Panel. Here you will be able to set the processing settings for all photos you are planning to automatically process. Figure11. Image Processing window: general view, Frame tab 17

18 The Image Processing window has the following areas: Source image area. If Apply Crop Frame is checked the human face will be outlined by the yellow frame (shows the face found) and by the green (or red) frame (cropping frame). Processed (cropped) image area. Information on the original image size. Information on the image resizing options. The crop frame parameters area. The photo enhancement and resizing area. Make the desired settings in the Image Processing window and they will be used for the automatic processing of the source images. Source image and crop frame The face area is automatically outlined by the yellow frame. The user can change the yellow frame size and position if necessary. The green (crop) frame outlines the result image area on the source image. The Crop frame is built automatically and can not be changed manually. This ensures a constant position of the person face on the resulting image. If the face on the image is not recognized automatically you have an option to outline the face area manually. If the face is located too close to the image frame and the area to be cropped is cut by the image border, the frame color will change from green to red. You can turn the crop frame on and off by checking Apply Crop Frame checkbox. 1. Zoom Using the Zoom slider set up the face percentage on the resulting ID photo. "70" value means that the human face will be occupy approximately 70% of the full cropped photo. If you use the same Zoom value for the photos to be processed you will get the consistent resulting images having the same size and the same surrounding area / face area ratio. The faces of a small child and a large adult person will have the same size in the resulting images. This is in full compliance with the requirements for ID images, and also allows 18

19 better identification when these images are used in electronic or printed form. 2. Position Vertical and Horizontal Position Vertical and Horizontal controls allow you to change the face position on the resulting image. Using these controls you can change the position of the yellow frame center to the crop (green) frame center. In other words you can shift the green frame horizontally or/and vertically. Adjust Position vertical and Position horizontal values to set up the face position on the resulting photo. The left bottom corner of the resulting photo corresponds to Position vertical "0" and Position horizontal "0". Set the Position vertical and Position horizontal to "50", and the face center will be located in the center of the resulting ID photo. Set the Position vertical to "25", and the distance above the face center will equal to 25% of the total photo vertical size. 3. Size Set the actual photo size. You can use either round values (e.g. 3 х 4) or fractional values (e.g. 3,5 x 4,5). 4. Frame effect. For now the Rounded corners option is available. New options will be added in the future. 5. Rounded corners. The ID photo corners can now be rounded. The corners color and roundness radius are optional. To reset all the settings to default values, click Reset button. Resizing You can customize the resulting image size in pixels. This allows all produced files to be the same size, as well as reduce file size. File size is important in order to save disk space or database size. In the case of large database ID image size reduction can strongly reduce overall database size, which prevents the slow down and improves its reliability. 19

20 Resizing in ID Photo Processor reduces the size of resulting image. Image enlarging is not possible. Resizing can also increase the image quality. You can process the image with maximum size, regardless of the size required, and then resize it to desired value. In this case resizing leads to improved output image quality. Figure 12. To enable resizing click Set button in Result Image Size box. In the Resizing options dialog box enable the corresponding checkbox and set the desired image size. All resulting images with the bigger size will be resized. Resizing always keeps image proportion. Actual image size after resizing will be displayed in the Result Image Size. Figure 13. Click OK to complete setting up resizing options and save it. Options will be applied to each processed image. 20

21 Image Correction On the Correction tab (see Figure 14) you can set enhancement options for the cropped images. Figure14. Image Processing window: general view, Correction tab The cropped photo can be enhanced if you are not quite satisfied with the image quality. It is possible to adjust image brightness, contrast, gamma, and sharpness using the corresponding controls. Brightness control allows you to make the image brighter or darker. Contrast is used if a face has little gradation. Gamma allows for both options - at the same time increasing or decreasing the brightness and contrast. Sharpness allows you to emphasize image details. It can improve the image when shooting was not enough in focus, or shooting conditions and camera quality do not allows to get a good focus image. For example, if the image was captured by the low-end webcam, the small 21

22 value of sharpness can help to improve the image details and make result image of better quality. WARNING! These improvements are only based on information obtained from the image. So they can not fix a broken shot, to restore the image, or to correct shooting errors. We recommend working with the images of good quality to minimize the necessity of any improvements. To reset all the settings to default values, click Reset button. ID Photo Processor operation To start batch photo processing make all settings described in the previous sections, run ID Photo Processor as stand alone or from any TWAIN compatible application. If you start it as stand alone the Process to TWAIN button will be grayed out. Stand alone operation. Select the image folder (or original images) to be processed, and press Process to file or Process to Clipboard. The first image from the source folder will open in the Image Processing window. The human face is found automatically on the original image. 22

23 Figure 15. Image Processing window. The ID Image Processing window provides an ability to crop the face area, and enhance the resulting image if necessary. The original image is processed according to the settings made (Processing settings button on the Control Panel). The face area is automatically outlined by the yellow frame. You can change the frame size and position if necessary. If the face on the image is not recognized automatically the user has an option to outline the face area manually by moving the yellow frame. The green frame outlines the image area to be cropped. The yellow frame / green frame ratio and position are adjusted by Zoom. If you do not need to crop the face, uncheck the Apply crop frame box. After the image is processed there are four options in the Image processing window: 23

24 Skip - the cropped image will be skipped and not saved in the Destination folder, the next image will open in the Image Processing window. Save the cropped image will be saved in the Destination folder, the image processing will continue. Back go back to the original photos. Close - the cropped image will be skipped and the image processing will be cancelled. During the batch processing ID Photo Processor shows a progress bar window and counts the files processed. You can interrupt the batch photo processing by clicking Cancel button in this window. Canceling the batch photo processing can take a time, wait for the report window confirming that the process is interrupted. After completion the batch photo processing the report window will be displayed. Figure 17. The window displays overall results of the batch photo processing. Work as TWAIN driver. If you start ID Photo Processor as TWAIN driver from a TWAIN compatible application, the Process to TWAIN button will be active (see Figure 18). Click Process to TWAIN, and the selected image(s) or image folder will be opened in the ID Image Processing window, cropped, enhanced and transferred to the TWAIN application. 24

25 (1) (2) (3) Figure 18. ID Photo Processor started from XnView software. 1 Select image and click Process to TWAIN, 2 ID Photo Processing, 3 Cropped photo transferred to XnView software. External tools 25

26 ID Photo Processor provides an ability create so called External tools in order to send the processed photo to a third party program for further processing or send them by . You can create External tools in menu File Options External tools tab. Just add New tool and select the executed file (e.g. XnView.exe, Mozilla Thunderbird.exe, etc.) in the Target field. Check Run automatically after file processing box, and the processed photo will be automatically sent to the third party software. If this box is not check ed, the original (not processed) images will be sent to the third party software. You can create unlimited number of External tools, and you can select them in the Actions menu. When the tool is selected, click Process to file, and the original photo will open automatically in the selected External tool (external software). Profiles You can save the photo processing settings to Profile (s). To create a new Profile first select desired image processing settings in the ID Image Processing window (Processing settings button on the Control Panel). They will be saved in Profile. Then Click Admin button in the upper right corner of the software window, and select New Profile. Follow Wizard instructions, and create New Profile. It will be listed in the Profiles list on the Control Panel, and you will be able to select it if necessary. When you select the required Profile the ID Photo Processor settings are automatically adjusted accordingly. 5. ABOUT COMPANY We hope that you install ID Photo Processor software and learn how to use it with no problems, and that your work will be more effective and comfortable than before. Other software products offered by our company: ID Photo Software inphoto ID SLR 26

27 inphoto ID PS inphoto ID Webcam Camera control software inphoto Capture SLR inphoto Capture PS ID card software Incardex Information on all above products can be found on Please feel free to contact us If you have any problems or questions concerning ID Photo Processor operation, If you have any comments on ID Photo Processor operation, If you need any help on selection of software and hardware for your application. We will be happy to help you. Akond company Russia, St.-Petersburg, Phone/fax: +7 (812) Cell: +7 (921)

inphoto ID PS Automatic ID photography With Canon PowerShot camera User Guide

inphoto ID PS Automatic ID photography With Canon PowerShot camera User Guide inphoto ID PS Automatic ID photography With Canon PowerShot camera User Guide 2018 Akond company Phone/fax: +7(812)384-6430 Cell: +7(921)757-8319 e-mail: info@akond.net akondsales@gmail.com http://www.akond.net

More information

inphoto ID SLR Automatic ID photography With Canon SLR camera User Guide

inphoto ID SLR Automatic ID photography With Canon SLR camera User Guide inphoto ID SLR Automatic ID photography With Canon SLR camera User Guide 2014 Akond company Phone/fax: +7(812)384-6430 Cell: +7(921)757-8319 e-mail: info@akond.net akondsales@gmail.com http://www.akond.net

More information

inphoto ID Canon camera control software Automatic ID photography User Guide

inphoto ID Canon camera control software Automatic ID photography User Guide inphoto ID Canon camera control software Automatic ID photography User Guide 2008 Akond company 197342, Russia, St.-Petersburg, Serdobolskaya, 65A Phone/fax: +7(812)600-6918 Cell: +7(921)757-8319 e-mail:

More information

inphoto ID Canon and Olympus camera control software Automatic ID photography User Guide

inphoto ID Canon and Olympus camera control software Automatic ID photography User Guide inphoto ID Canon and Olympus camera control software Automatic ID photography User Guide 2006 Akond company 197342, Russia, St.-Petersburg, Serdobolskaya, 65a Phone/fax: +7(812)600-6918 Cell: +7(921)757-8319

More information

Copyright Notice. Trademarks

Copyright Notice. Trademarks Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording,

More information

CHAPTER1: QUICK START...3 CAMERA INSTALLATION... 3 SOFTWARE AND DRIVER INSTALLATION... 3 START TCAPTURE...4 TCAPTURE PARAMETER SETTINGS... 5 CHAPTER2:

CHAPTER1: QUICK START...3 CAMERA INSTALLATION... 3 SOFTWARE AND DRIVER INSTALLATION... 3 START TCAPTURE...4 TCAPTURE PARAMETER SETTINGS... 5 CHAPTER2: Image acquisition, managing and processing software TCapture Instruction Manual Key to the Instruction Manual TC is shortened name used for TCapture. Help Refer to [Help] >> [About TCapture] menu for software

More information

Windows INSTRUCTION MANUAL

Windows INSTRUCTION MANUAL Windows E INSTRUCTION MANUAL Contents About This Manual... 3 Main Features and Structure... 4 Operation Flow... 5 System Requirements... 8 Supported Image Formats... 8 1 Installing the Software... 1-1

More information

DOCUMENT SCANNER INSTRUCTIONS. Space. Backup. Count Only. New File. Scanner. Feeding Option Manual Auto Semi-Auto

DOCUMENT SCANNER INSTRUCTIONS. Space. Backup. Count Only. New File. Scanner. Feeding Option Manual Auto Semi-Auto E FILM F Scanner A Space Count Only New File Feeding Option Manual Auto Semi-Auto Backup DOCUMENT SCANNER INSTRUCTIONS NOTICE q Copyright 2001 by CANON ELECTRONICS INC. All rights reserved. No part of

More information

Introduction. Introduction

Introduction. Introduction Introduction Introduction Thank you for purchasing this Canon Microfilm Scanner 800II. These instructions describe how to use the Scanning Utility 800 utility software to import an image projected on the

More information

Introduction. Introduction

Introduction. Introduction Introduction Introduction Thank you for purchasing the Microfilm Scanner 800II. These Instructions describe how to use the ISIS/TWAIN driver software that makes it possible for you to use ISIS-compatible

More information

Monaco ColorWorks User Guide

Monaco ColorWorks User Guide Monaco ColorWorks User Guide Monaco ColorWorks User Guide Printed in the U.S.A. 2003 Monaco Systems, Inc. All rights reserved. This document contains proprietary information of Monaco Systems, Inc. No

More information

Operating Manual. (Version 3.5)

Operating Manual. (Version 3.5) Operating Manual (Version 3.5) Thank you for purchasing this PENTAX Digital Camera. This is the manual for PENTAX PHOTO Browser 3 and PENTAX PHOTO Laboratory 3 software for your Windows PC or Macintosh

More information

Photo/Image Controls

Photo/Image Controls Table of Contents Introduction... 2 Using Image Controls... 2 Using the Image Editor... 3 19 July 2017 TIP-2017-092 1 Introduction The Edge s photo controls now include image editing options. This document

More information

Optika ISview. Image acquisition and processing software. Instruction Manual

Optika ISview. Image acquisition and processing software. Instruction Manual Optika ISview Image acquisition and processing software Instruction Manual Key to the Instruction Manual IS is shortened name used for OptikaISview Square brackets are used to indicate items such as menu

More information

Operating Manual. (Version 3.10)

Operating Manual. (Version 3.10) Operating Manual (Version 3.10) Thank you for purchasing this PENTAX Digital Camera. This is the manual for PENTAX PHOTO Browser 3 and PENTAX PHOTO Laboratory 3 software for your Windows PC or Macintosh

More information

W i n d o w s. ScanGear CS-S 4.3 for CanoScan FB1200S Color Image Scanner. User's Guide

W i n d o w s. ScanGear CS-S 4.3 for CanoScan FB1200S Color Image Scanner. User's Guide f o r W i n d o w s ScanGear CS-S 4.3 for CanoScan FB1200S Color Image Scanner User's Guide How to Make Best Use of the Manuals 2 When you open the box Printed Manual CanoScan FB1200S Quick Start Guide

More information

GXCapture 8.1 Instruction Manual

GXCapture 8.1 Instruction Manual GT Vision image acquisition, managing and processing software GXCapture 8.1 Instruction Manual Contents of the Instruction Manual GXC is the shortened name used for GXCapture Square brackets are used to

More information

Operating Manual (Version 3.6)

Operating Manual (Version 3.6) e_kb464_pc_84percent.book Page 1 Monday, September 29, 2008 2:00 PM Operating Manual (Version 3.6) e_kb464_pc_84percent.book Page 2 Monday, September 29, 2008 2:00 PM Thank you for purchasing this PENTAX

More information

Image Processing Software Option Version 2.5

Image Processing Software Option Version 2.5 P3PC-E037-03ENC2 Image Processing Software Option Version 2.5 USER'S GUIDE Information in this document is subject to change without notice Copyright 2002-2004 PFU LIMITED, All Rights Reserved. i Contents

More information

The screen pictures shown in this manual may differ depending on the type of computer or camera used.

The screen pictures shown in this manual may differ depending on the type of computer or camera used. Operating Manual Thank you for purchasing the PENTAX Digital Camera. This is the manual for PENTAX PHOTO Browser 3 and PENTAX PHOTO Laboratory 3 software for your Windows PC or Macintosh for enjoying images

More information

Copyright 2014 SOTA Imaging. All rights reserved. The CLIOSOFT software includes the following parts copyrighted by other parties:

Copyright 2014 SOTA Imaging. All rights reserved. The CLIOSOFT software includes the following parts copyrighted by other parties: 2.0 User Manual Copyright 2014 SOTA Imaging. All rights reserved. This manual and the software described herein are protected by copyright laws and international copyright treaties, as well as other intellectual

More information

How To Resize & Crop Images to 1024 x 768 Pixels For Projection

How To Resize & Crop Images to 1024 x 768 Pixels For Projection SCOPE This document covers the process cropping and resizing an image to a suitable size in pixels for digital projection. This process assumes the use of XnView (see Appendix), a free image editor from

More information

Contents. Nikon Scan for Windows. Scanner Control Software and TWAIN Source. Reference Manual. Overview Before You Begin.

Contents. Nikon Scan for Windows. Scanner Control Software and TWAIN Source. Reference Manual. Overview Before You Begin. Contents Overview Before You Begin System Requirements Software Installation Basic Operations Scanner Control Software and TWAIN Source Nikon Scan for Windows Reference Manual The Scan Window Opening the

More information

Copyright EUKON Digital, Inc All rights reserved. EKPrint Studio. Apparel Printing Software. User Manual

Copyright EUKON Digital, Inc All rights reserved. EKPrint Studio. Apparel Printing Software. User Manual EKPrint Studio Apparel Printing Software User Manual 6.0 www.eukondigital.com Copyright EUKON Digital, Inc. 2010-2012. All rights reserved. Page 1 1. Overview... 4 2. Installation... 4 2. 1 EKPrint Studio

More information

Scanning Setup Guide for TWAIN Datasource

Scanning Setup Guide for TWAIN Datasource Scanning Setup Guide for TWAIN Datasource Starting the Scan Validation Tool... 2 The Scan Validation Tool dialog box... 3 Using the TWAIN Datasource... 4 How do I begin?... 5 Selecting Image settings...

More information

Fuzzy Image Editor. User Manual

Fuzzy Image Editor. User Manual Fuzzy Image Editor User Manual I. Installation To install the program, run Fuzzy Image Editor.msi and follow the prompts. Then go to your Program Files/Team6/FuzzyImageEditor folder, right click and run

More information

Software Reference. FlexColor 4.0 for Camera Backs. by Hasselblad Imacon

Software Reference. FlexColor 4.0 for Camera Backs. by Hasselblad Imacon Software Reference FlexColor 4.0 for Camera Backs by Hasselblad Imacon 2 2004 Hasselblad A/S. All rights reserved., Part No 70030035 revision 1.0. The information in this manual is furnished for informational

More information

The ideal K-12 science microscope solution. User Guide. for use with the Nova5000

The ideal K-12 science microscope solution. User Guide. for use with the Nova5000 The ideal K-12 science microscope solution User Guide for use with the Nova5000 NovaScope User Guide Information in this document is subject to change without notice. 2009 Fourier Systems Ltd. All rights

More information

User Guide. Version 1.4. Copyright Favor Software. Revised:

User Guide. Version 1.4. Copyright Favor Software. Revised: User Guide Version 1.4 Copyright 2009-2012 Favor Software Revised: 2012.02.06 Table of Contents Introduction... 4 Installation on Windows... 5 Installation on Macintosh... 6 Registering Intwined Pattern

More information

INSTRUCTION MANUAL MM-A209

INSTRUCTION MANUAL MM-A209 E INSTRUCTION MANUAL 9222-7300-11 MM-A209 2 BEFORE YOU BEGIN Before installing the DiMAGE Viewer software, read the data-transfer section in the camera manual. This section details how to connect the camera

More information

User Guide. Version 1.2. Copyright Favor Software. Revised:

User Guide. Version 1.2. Copyright Favor Software. Revised: User Guide Version 1.2 Copyright 2009-2010 Favor Software Revised: 2010.05.18 Table of Contents Introduction...4 Installation on Windows...5 Installation on Macintosh...6 Registering Intwined Pattern Studio...7

More information

ScanGear CS-U 5.6. for CanoScan FB1210U Color Scanner. User s Guide

ScanGear CS-U 5.6. for CanoScan FB1210U Color Scanner. User s Guide ScanGear CS-U 5.6 for CanoScan FB1210U Color Scanner User s Guide Copyright Notice Copyright 2000 Canon Inc. This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may

More information

Visioneer OneTouch Scanner. Installation Guide FOR WINDOWS

Visioneer OneTouch Scanner. Installation Guide FOR WINDOWS Visioneer OneTouch Scanner Installation Guide FOR WINDOWS TABLE OF CONTENTS i TABLE OF CONTENTS Getting Started with your new Scanner....................... 1 Step 1: Installing the Scanner Software.......................

More information

Brightness and Contrast Control Reference Guide

Brightness and Contrast Control Reference Guide innovation Series Scanners Brightness and Contrast Control Reference Guide A-61506 Part No. 9E3722 CAT No. 137 0337 Using the Brightness and Contrast Control This Reference Guide provides information and

More information

AKVIS Enhancer. AKVIS Enhancer

AKVIS Enhancer. AKVIS Enhancer AKVIS Enhancer AKVIS Enhancer AKVIS Enhancer is a tool for revealing details on a picture. Enhancer allows detecting details from underexposed, overexposed and mid tone areas of a photo without manipulating

More information

Version 4.2 For WINDOWS

Version 4.2 For WINDOWS SIGMA Photo Pro User Guide Companion Processing Software for SIGMA Digital Cameras Version 4.2 For WINDOWS I M P O R T A N T : Please Read Before You Start Thank you very much for purchasing this SIGMA

More information

ROTATING SYSTEM T-12, T-20, T-50, T- 150 USER MANUAL

ROTATING SYSTEM T-12, T-20, T-50, T- 150 USER MANUAL ROTATING SYSTEM T-12, T-20, T-50, T- 150 USER MANUAL v. 1.11 released 12.02.2016 Table of contents Introduction to the Rotating System device 3 Device components 4 Technical characteristics 4 Compatibility

More information

CHROMACAL User Guide (v 1.1) User Guide

CHROMACAL User Guide (v 1.1) User Guide CHROMACAL User Guide (v 1.1) User Guide User Guide Notice Hello and welcome to the User Guide for the Datacolor CHROMACAL Color Calibration System for Optical Microscopy, a cross-platform solution that

More information

Scanning Setup Guide for the ISIS Driver

Scanning Setup Guide for the ISIS Driver Scanning Setup Guide for the ISIS Driver Using the Layout More tab... 2 Using the ISIS Driver to setup presets... 3 Creating a new preset... 4 Presets tab... 5 Main tab... 6 Layout tab... 9 Image Processing

More information

Applying mathematics to digital image processing using a spreadsheet

Applying mathematics to digital image processing using a spreadsheet Jeff Waldock Applying mathematics to digital image processing using a spreadsheet Jeff Waldock Department of Engineering and Mathematics Sheffield Hallam University j.waldock@shu.ac.uk Introduction When

More information

User Manual Veterinary

User Manual Veterinary Veterinary Acquisition and diagnostic software Doc No.: Rev 1.0.1 Aug 2013 Part No.: CR-FPM-04-022-EN-S 3DISC, FireCR, Quantor and the 3D Cube are trademarks of 3D Imaging & Simulations Corp, South Korea,

More information

Using Adobe Photoshop to enhance the image quality. Assistant course web site:

Using Adobe Photoshop to enhance the image quality. Assistant course web site: Using Adobe Photoshop to enhance the image quality Assistant course web site: http://www.arches.uga.edu/~skwang/edit6170/course.htm Content Introduction 2 Unit1: Scan images 3 Lesson 1-1: Preparations

More information

How to Create Website Banners

How to Create Website Banners How to Create Website Banners In the following instructions you will be creating banners in Adobe Photoshop Elements 6.0, using different images and fonts. The instructions will consist of finding images,

More information

Happy Link Software INSTRUCTION MANUAL

Happy Link Software INSTRUCTION MANUAL Happy Link Software INSTRUCTION MANUAL 101001E-3 HAPPY Contents Regarding this software Normal Operation -------------------------------------------------------------------------------------------------

More information

ColorCode 3-D Editor Version 1.2 Manual. Make ColorCode 3-D, Auto 3-D and Standard 3-D images on your PC by ColorCode 3-D, Denmark!!!

ColorCode 3-D Editor Version 1.2 Manual. Make ColorCode 3-D, Auto 3-D and Standard 3-D images on your PC by ColorCode 3-D, Denmark!!! US Patent No. 6,687,003 AU Patent No. 763370 EP Patent No. 1131658 ColorCode 3-D Editor Version 1.2 Manual Make ColorCode 3-D, Auto 3-D and Standard 3-D images on your PC 2012 by ColorCode 3-D, Denmark!!!

More information

Introduction to: Microsoft Photo Story 3. for Windows. Brevard County, Florida

Introduction to: Microsoft Photo Story 3. for Windows. Brevard County, Florida Introduction to: Microsoft Photo Story 3 for Windows Brevard County, Florida 1 Table of Contents Introduction... 3 Downloading Photo Story 3... 4 Adding Pictures to Your PC... 7 Launching Photo Story 3...

More information

Picture Style Editor Ver Instruction Manual

Picture Style Editor Ver Instruction Manual ENGLISH Picture Style File Creating Software Picture Style Editor Ver. 1.12 Instruction Manual Content of this Instruction Manual PSE is used for Picture Style Editor. In this manual, the windows used

More information

Resizing for ACCC Competition. Rev 1.0 9/12/2011

Resizing for ACCC Competition. Rev 1.0 9/12/2011 Resizing for ACCC Competition Rev 1.0 9/12/2011 This document contains instructions for resizing your images to comply with the new Digital Image Competition Guidelines. In this document we have attempted

More information

Camera Club of Hendersonville

Camera Club of Hendersonville For the best presentation, images submitted for digital projection need to be prepared and resized properly. The club displays images with a high quality projector so the final image needs to be no more

More information

SCANNING IMAGES - USER S GUIDE. Scanning Images with Epson Smart Panel and PhotoShop [for Epson 1670 scanners]

SCANNING IMAGES - USER S GUIDE. Scanning Images with Epson Smart Panel and PhotoShop [for Epson 1670 scanners] University of Arizona Information Commons Training 1 SCANNING IMAGES - USER S GUIDE Scanning Images with Epson Smart Panel and PhotoShop [for Epson 1670 scanners] p.2 Introduction and Overview Differences

More information

Uploading Images for CdCC Competitions

Uploading Images for CdCC Competitions Cranbury digital Camera Club Uploading Images for CdCC Competitions There are two consideration for uploading images for CdCC competitions. The first is correctly sizing and saving images on your hard

More information

SAQA. How to Submit an Online Entry. Art by Mary Kay Fosnacht

SAQA. How to Submit an Online Entry. Art by Mary Kay Fosnacht SAQA KS MO OK How to Submit an Online Entry Art by Mary Kay Fosnacht Registration Process Locate and read the Prospectus Open the Registration Form Preview 1. About the Artist 2. About the Art 3. Upload

More information

KODAK Dental Imaging Software. Quick Start Guide

KODAK Dental Imaging Software. Quick Start Guide KODAK Dental Imaging Software Quick Start Guide Notice Congratulations on your purchase of The KODAK Dental Imaging Software. Thank you for your confidence in our products and we will do all in our power

More information

Introduction. Let s get started...

Introduction. Let s get started... Introduction Welcome to PanoramaPlus 2, Serif s fully-automatic 2D image stitcher. If you re looking for panorama-creating software that s quick and easy to use, but doesn t compromise on image quality,

More information

Veterinary Digital X-Ray System Quick Start Guide

Veterinary Digital X-Ray System Quick Start Guide 1 Veterinary Digital X-Ray System Quick Start Guide 2 SOPIX² X-Ray Sensors Quick Start Guide ***PERFORM THIS STEP BEFORE PLUGGING IN THE SENSOR*** Step 1 Load the CD: If you have already plugged in the

More information

PosterArtist Quick Guide

PosterArtist Quick Guide PosterArtist Quick Guide Create posters in four easy steps STEP STEP STEP STEP Use Auto Design to Create Posters Simply select a poster type and a design image to automatically create high-quality posters.

More information

ScanGear CS-U 6.0. for CanoScan D646U Color Scanner. User s Guide

ScanGear CS-U 6.0. for CanoScan D646U Color Scanner. User s Guide ScanGear CS-U 6.0 for CanoScan D646U Color Scanner User s Guide Copyright Notice Copyright 2000 Canon Inc. This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may

More information

COLOR EXAMPLES BEFORE YOU BEGIN. Tone-curve corrections. Before installing the DiMAGE Scan Utility. Digital ROC - Reconstruction Of Color

COLOR EXAMPLES BEFORE YOU BEGIN. Tone-curve corrections. Before installing the DiMAGE Scan Utility. Digital ROC - Reconstruction Of Color E SOFTWARE MANUAL COLOR EXAMPLES Tone-curve corrections By selecting individual color channels on the tone curve, adjustments to the overall color of an image can be made. In this example, the image is

More information

Neat Image. User guide. To make images look better. Document version 4.2, January 10, Copyright by ABSoft. All rights reserved.

Neat Image. User guide. To make images look better. Document version 4.2, January 10, Copyright by ABSoft. All rights reserved. To make images look better. User guide Document version 4.2, January 10, 2005 Table of contents 1. Introduction...3 1.1. Overview...3 1.2. Features...3 1.3. Requirements...4 2. Key concepts...5 2.1. What

More information

USB Color Camera User Manual. Sentech USB Camera Viewing Software StCamSWare (ver.0.0.8)

USB Color Camera User Manual. Sentech USB Camera Viewing Software StCamSWare (ver.0.0.8) USB Color Camera User Manual Sentech USB Camera Viewing Software Quick Start Reference Guide Installation of Software 1. Uninstall any previous version of StCamSWare software before installing the latest

More information

Blue Bamboo P25 Device Manager Guide

Blue Bamboo P25 Device Manager Guide Blue Bamboo P25 Device Manager Guide Version of Device Manager: 1.1.28 Document version: 2.3 Document date: 2011-09-20 Products: P25 / P25-M / P25i / P25i-M BLUE BAMBOO Headquarters Blue Bamboo Transaction

More information

1 ImageBrowser Software User Guide 5.1

1 ImageBrowser Software User Guide 5.1 1 ImageBrowser Software User Guide 5.1 Table of Contents (1/2) Chapter 1 What is ImageBrowser? Chapter 2 What Can ImageBrowser Do?... 5 Guide to the ImageBrowser Windows... 6 Downloading and Printing Images

More information

FUJITSU TWAIN 32 Scanner Driver

FUJITSU TWAIN 32 Scanner Driver P3PC-1472-09ENZ0 FUJITSU TWAIN 32 Scanner Driver Scanner Utility for Microsoft Windows Version 9.19 User's Guide For Use with Microsoft Windows 2000, Windows XP, Windows Server 2003, Windows Server 2008

More information

ScanMate. i920 Scanner. Scanning Setup Guide for TWAIN Applications A-61733

ScanMate. i920 Scanner. Scanning Setup Guide for TWAIN Applications A-61733 ScanMate i920 Scanner Scanning Setup Guide for TWAIN Applications A-61733 Scanning Setup Guide for the TWAIN Datasource Starting the Scan Validation Tool... 2 The Scan Validation Tool dialog box... 3 Using

More information

i800 Series Scanners Image Processing Guide User s Guide A-61510

i800 Series Scanners Image Processing Guide User s Guide A-61510 i800 Series Scanners Image Processing Guide User s Guide A-61510 ISIS is a registered trademark of Pixel Translations, a division of Input Software, Inc. Windows and Windows NT are either registered trademarks

More information

Picture Style Editor Ver Instruction Manual

Picture Style Editor Ver Instruction Manual ENGLISH Picture Style File Creating Software Picture Style Editor Ver. 1.15 Instruction Manual Content of this Instruction Manual PSE stands for Picture Style Editor. indicates the selection procedure

More information

Sentech USB Camera User Manual. Sentech USB Camera Viewing Software StCamSWare

Sentech USB Camera User Manual. Sentech USB Camera Viewing Software StCamSWare Sentech USB Camera User Manual Sentech USB Camera Viewing Software StCamSWare Safety Precautions CAUTION CAUTION RISK OF RISK ELECTRIC OF ELECTRIC SHOCK SHOCK RISK DO OF NOT ELECTRIC DO OPEN NOT SHOCK

More information

ISCapture User Guide. advanced CCD imaging. Opticstar

ISCapture User Guide. advanced CCD imaging. Opticstar advanced CCD imaging Opticstar I We always check the accuracy of the information in our promotional material. However, due to the continuous process of product development and improvement it is possible

More information

Software Starter Guide

Software Starter Guide D I G I T A L C A M E R A Software Starter Guide For Use with the Canon Digital Camera Solution Disk Version 2.0 To Download Images to a Computer for Windows for Macintosh Install the Software p. 7 p.

More information

You can easily print images using the Capture NX print function. Here we will explain the process for printing

You can easily print images using the Capture NX print function. Here we will explain the process for printing Printing - Print Size Request How do you print images to fit on particular paper sizes. Response You can easily print images using the Capture NX print function. Here we will explain the process for printing

More information

Camera Raw software is included as a plug-in with Adobe Photoshop and also adds some functions to Adobe Bridge.

Camera Raw software is included as a plug-in with Adobe Photoshop and also adds some functions to Adobe Bridge. Editing Images in Camera RAW Camera Raw software is included as a plug-in with Adobe Photoshop and also adds some functions to Adobe Bridge. Camera Raw gives each of these applications the ability to import

More information

Micro-Image Capture 8 Installation Instructions & User Guide

Micro-Image Capture 8 Installation Instructions & User Guide Micro-Image Capture 8 Installation Instructions & User Guide Software installation: Micro-Image Capture Software 1. Load Micro-Image Capture software CD onto host PC. Auto Run should start driver/software

More information

Picture Style Editor Ver Instruction Manual

Picture Style Editor Ver Instruction Manual ENGLISH Picture Style File Creating Software Picture Style Editor Ver. 1.18 Instruction Manual Content of this Instruction Manual PSE stands for Picture Style Editor. In this manual, the windows used in

More information

Instructions for Finding and Inserting Photos into Documents

Instructions for Finding and Inserting Photos into Documents Instructions for Finding and Inserting Photos into Documents To find and use project photos for documents and presentation, the easiest way is to use the Photoshop Album. The Photoshop Album must be accessed

More information

Photoshop: Save for Web and Devices

Photoshop: Save for Web and Devices Photoshop: Save for Web and Devices Nigel Buckner 2011 nigelbuckner.com This handout explains how to use the Save for Web and Devices process in Photoshop. This process is useful for preparing images for

More information

ImagesPlus Basic Interface Operation

ImagesPlus Basic Interface Operation ImagesPlus Basic Interface Operation The basic interface operation menu options are located on the File, View, Open Images, Open Operators, and Help main menus. File Menu New The New command creates a

More information

WELCOME WHAT S IN THE BOX

WELCOME WHAT S IN THE BOX WELCOME Congratulations on purchasing your Visioneer PaperPort flatbed scanner. With your scanner, you can quickly scan paper documents and color photos to place their electronic images on your computer.

More information

Imaging Features Available in HTML5. it just makes sense

Imaging Features Available in HTML5. it just makes sense Imaging Features Available in HTML5 it just makes sense August, 2018 Imaging Features Available in HTML5 As part of the 5.2 SP1 release, the Images functionality is now available in HTML5 and provides

More information

ScanGear CS-U 5.8. for CanoScan D660U Color Scanner. User s Guide

ScanGear CS-U 5.8. for CanoScan D660U Color Scanner. User s Guide ScanGear CS-U 5.8 for CanoScan D660U Color Scanner User s Guide Copyright Notice Copyright 2000 Canon Inc. This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may

More information

Nikon View DX for Macintosh

Nikon View DX for Macintosh Contents Browser Software for Nikon D1 Digital Cameras Nikon View DX for Macintosh Reference Manual Overview Setting up the Camera as a Drive Mounting the Camera Camera Drive Settings Unmounting the Camera

More information

For customers in Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

For customers in Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. User manual For customers in North and South America For customers in USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not

More information

Digital Portable Overhead Document Camera LV-1010

Digital Portable Overhead Document Camera LV-1010 Digital Portable Overhead Document Camera LV-1010 Instruction Manual 1 Content I Product Introduction 1.1 Product appearance..3 1.2 Main functions and features of the product.3 1.3 Production specifications.4

More information

TOON BOOM HARMONY Advanced Edition - Compositing and Effects Guide (Server)

TOON BOOM HARMONY Advanced Edition - Compositing and Effects Guide (Server) TOON BOOM HARMONY 12.1 - Advanced Edition - Compositing and Effects Guide (Server) Legal Notices Toon Boom Animation Inc. 4200 Saint-Laurent, Suite 1020 Montreal, Quebec, Canada H2W 2R2 Tel: +1 514 278

More information

INSTRUCTIONS. Scanning Utility 5000 INSTRUCTIONS DOCUMENT SCANNER ENGLISH

INSTRUCTIONS. Scanning Utility 5000 INSTRUCTIONS DOCUMENT SCANNER ENGLISH DOCUMENT SCANNER INSTRUCTIONS Scanning Utility 5000 INSTRUCTIONS ENGLISH Be sure to thoroughly read this Instructions before using this unit, and store this manual in a safe place after use. FCC REGULATIONS

More information

How to generate different file formats

How to generate different file formats How to generate different file formats Different mediums print, web, and video require different file formats. This guide describes how to generate appropriate file formats for these mediums by using Adobe

More information

Nova Full-Screen Calibration System

Nova Full-Screen Calibration System Nova Full-Screen Calibration System Version: 5.0 1 Preparation Before the Calibration 1 Preparation Before the Calibration 1.1 Description of Operating Environments Full-screen calibration, which is used

More information

2014 by Microtek International, Inc. All rights reserved.

2014 by Microtek International, Inc. All rights reserved. 2014 by Microtek International, Inc. All rights reserved. Microtek and ScanWizard are trademarks of Microtek International, Inc. Windows is a registered trademark of Microsoft Corporation. All other products

More information

SKF TKTI. Thermal Camera Software. Instructions for use

SKF TKTI. Thermal Camera Software. Instructions for use SKF TKTI Thermal Camera Software Instructions for use Table of contents 1. Introduction...4 1.1 Installing and starting the Software... 5 2. Usage Notes...6 3. Image Properties...7 3.1 Loading images

More information

Scanner Utility for Microsoft Windows Version 9.6. User's Guide

Scanner Utility for Microsoft Windows Version 9.6. User's Guide P3PC-E892-03EN Scanner Utility for Microsoft Windows Version 9.6 User's Guide For Use with Microsoft Windows 98, Windows Me, Windows 2000 and Windows XP Introduction Thank you for purchasing the "Scanner

More information

FUJITSU TWAIN 32 Scanner Driver. Scanner Utility for Microsoft Windows Version User's Guide

FUJITSU TWAIN 32 Scanner Driver. Scanner Utility for Microsoft Windows Version User's Guide P3PC- E417-02EN FUJITSU TWAIN 32 Scanner Driver Scanner Utility for Microsoft Windows Version 9.10 User's Guide For Use with Microsoft Windows 98, Windows Me, Windows 2000 and Windows XP Introduction

More information

INSTRUCTION MANUAL 2.3

INSTRUCTION MANUAL 2.3 GB INSTRUCTION MANUAL 2.3 Become a member of Konica Minolta Photo World today, free of charge, and enter the fascinating world of Konica Minolta photography. The ultimate gateway to knowledge for photo-fans:

More information

User Manual REV 1.0 Thank you for choosing this Mitsubishi Electric product More information is available at http://www.mitsubishiphotosuite.com/ 2 1 INSTALLING THE PRODUCT.... 4 1.1 SYSTEM REQUIREMENTS...

More information

Digital Imaging - Photoshop

Digital Imaging - Photoshop Digital Imaging - Photoshop A digital image is a computer representation of a photograph. It is composed of a grid of tiny squares called pixels (picture elements). Each pixel has a position on the grid

More information

For customers in USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

For customers in USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: User manual For customers in North and South America For customers in USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not

More information

Machinery HDR Effects 3

Machinery HDR Effects 3 1 Machinery HDR Effects 3 MACHINERY HDR is a photo editor that utilizes HDR technology. You do not need to be an expert to achieve dazzling effects even from a single image saved in JPG format! MACHINERY

More information

MINIMUM SYSTEM REQUIREMENTS

MINIMUM SYSTEM REQUIREMENTS Quick Start Guide Copyright 2000-2012 Frontline Test Equipment, Inc. All rights reserved. You may not reproduce, transmit, or store on magnetic media any part of this publication in any way without prior

More information

Mirage 2.0. What's new in Mirage 2.0? din.a.x Digitale Bildbearbeitung GmbH Fuggerstrasse 9a D Neuss

Mirage 2.0. What's new in Mirage 2.0? din.a.x Digitale Bildbearbeitung GmbH Fuggerstrasse 9a D Neuss What's new in Mirage 2.0? 1. Adjust the quality of the preview image 2. New user-defined labels 3. Ink level display and printer status messages 4. New "Tiling" menu item 5. Split screen page preview 6.

More information

i1800 Series Scanners

i1800 Series Scanners i1800 Series Scanners Scanning Setup Guide A-61580 Contents 1 Introduction................................................ 1-1 About this manual........................................... 1-1 Image outputs...............................................

More information

Using the TWAIN Datasource

Using the TWAIN Datasource Using the TWAIN Datasource Starting the Scan Validation Tool... 2 The Scan Validation Tool dialog box... 2 Using the TWAIN Datasource... 4 How do I begin?... 4 Creating a new Setting Shortcut... 5 Changing

More information

Using the TWAIN Datasource

Using the TWAIN Datasource Using the TWAIN Datasource Starting the Scan Validation Tool... 2 The Scan Validation Tool dialog box... 2 Using the TWAIN Datasource... 4 How do I begin?... 4 Creating a new Setting Shortcut... 5 Changing

More information