Global Standard. Upgraded to Increase Usability. Achieving low power consumption and high noise-resistance The basic types are added in lineup
|
|
- Adela Stafford
- 5 years ago
- Views:
Transcription
1 Amplifier Built-in Compact Photoelectric CX-00 SERIES Ver.2 UL Recognition Certified (Some models only) Global Standard Upgraded to Increase Usability Achieving low power consumption and high noise-resistance The basic types are added in lineup panasonic.net/id/pidsx/global
2 The global standard CX-00 series s that are environmentally and user friendly. The various lineup covers through the inclusion of a newly developed custom integrated circuit. The CX-00 series achieves a significantly higher reliability in the same package than previous models. Providing stable detection with low power consumption Includes an analog CMOS processor ASIC Strong Demonstrating stable detection, even in harsh environments The CX-00 series incorporates an acrylic that strongly resists oils and coolant fluids, and a polycarbonate indicator cover that strongly resists ethanol. The CX-00 series is also characterized by strong resistance to noise, reciprocal interference and cold environments. 1 Resistant to oil and coolant liquids CX-1 /2 /9 Strongly ethanol resistant CX- /8 The lens material is made of a strong acrylic that resists the harmful effects of coolants. These sensors can be used with confidence even around metal processing machine that disperse oil mists. The protection mechanism also conforms to IP67 (IEC). Test Oil JIS Standard Product Name Lubricant - Velocity Oil No. Water-insoluble 2-5 Daphnecut AS-0D cutting oil 2-11 Yushiron Oil No.2ac (Note) Water-soluble W1-1 Yushiron Lubic HWC68 (Note) cutting oil W2-1 Yushiroken S50N (Note) 1,000 hours; Immersion (depth 0 m); Insulation resistance MΩ/0 V Note: Yushiron and Yushiroken are registered trademarks of Yushiro Chemical Industry Co., Ltd. A strong, ethanol resistant polycarbonate was used for the front and display covers. Safe even for installing near food processing machinery that disperses ethanol based detergents. The protection mechanism also conforms to IP67 (IEC). Caution: Set the CX-8 so that cleaning liquid will not get on to the attached reflector.
3 Upgrade1 Reducing environmental burdens further Up to 60% less power consumption The CX-00 series achieves reductions in power consumption of up to 60%, averaging % reduction when upgrading due to its unique design. These sensors reduce carbon emissions and contribute to environmental friendliness. Upgrade for up to 60% reduction Previous CX-82 ma New CX-82 ma Contributing to reduced carbon dioxide emissions Electricity consumed by the CX-00 series has been reduced on average.5 ma. Calculating 8 hours/day, 260 days (operating 5 days/week) for a total of 2,080 hours/year leads to: The CX-00 contributes Approx. 8.6 t annually in carbon dioxide reductions to the world Upgrade 2 Upgrade Stronger noise resistance Stronger inverter countermeasures Stronger output short-circuit resistance Stronger inverse wiring connection protection The CX-00 has a high noise resistance then its previons model. By incorporating an inverter countermeasure circuit that appropriately shifts with peak wavelength, the sensor now resists high-frequency noise from high-voltage inverter motors and inverter lights more effectively. Strengthening the output circuit inverse polarity protection prevents sensor damage caused by mistaken output or power supply wiring. High Performance High performance for many applications The CX-00 series is capable of stably detecting a minute difference of 0. mm in (the thickness of a business card) or μm 0.9 mil ultra-thin film, thanks to its unique optics and specialized design of electronic circuits. Bright red beam spot is useful when confirming a detection position. Save The CX-00 series has three different cable length types and uses very simple packaging to reduce waste. The bag is made of polyethylene and does not emit toxic gasses. Thoroughly eliminating unnecessary waste, reducing many environmental burdens 2
4 Thru-beam type Applications CX-11: m ft Detecting box collapsing within the rail of stacker crane CX-12: 15 m 9.21 ft CX-1: 0 m 98. ft Strong infrared beam CX-12/1 Remarkable penetrating ability enables applications such as package content detection come into practice. (Note) Strong in dust and dirt CX-12/1 The infrared light source is strong in dust and dirt compared to the red beam type. CX-1 Even the thru-beam type is strong at mutual interference CX-11 Synchronizing sensor for image processing systems Two CX-11 sensors, with their red beam light source, can be installed close together by inserting an interference prevention filter. Note: When utilizing penetrating power in detection, make sure to verify using the actual sensor. Interference prevention filter (Optional) CX-11 Retroreflective type CX-9: 5 m 16.0 ft CX-91: m 9.8 ft Long sensing range of 5 m 16.0 ft CX-9 A long 5 m 16.0 ft sensing range is possible with the red LED type that is easy to align with the beam axis. The sensors can be used for wide automatic door shutters. Retroreflective type with polarizing filters CX-91 Built-in polarizing filters ensure stable sensing even on a mirror surface object. Strong against extraneous light and noise CX-91 CX-82: 2 m ft CX-8: 1 m.281 ft CX-81: 0.5 m 1.60 ft For transparent object sensing Hardly affected by extraneous lights or noises, these sensors provide stable sensing. Two sensors can be mounted close together All models The interference prevention function lets two sensors of any type to be mounted close together precisely.
5 Diffuse reflective type Applications Detecting pins in the case CX-22: 800 mm 1.96 in CX-21: 00 mm 11 in CX-2: 0 mm.97 in CX-2: 70 to 00 mm to 11 in Narrow-view type 0 mm.97 in approx. CX-2 Spot diameter ø2.2 mm in approx. Beam axis alignment made easy with a high luminance spot beam CX-2 These sensors have a high luminance red LED spot beam which provides bright visibility enabling the sensing position to be checked at a glance. Because it achieved small beam spot approx. ø2 mm ø0.079 in at setting distance 0 mm.97 in, approx. ø5 mm ø0.197 in at setting distance 0 mm 7.87 in, even the minutest object can be accurately detected. Passage confirmation on substrate conveyor equipment Reduction of volume adjustment labor All models CX-2 Because these sensors possess many variations depending on the sensing range, they enable you to make optimal volume adjustment easily. Great visibility approx. ø2 mm ø0.079 in high luminance spot beam (at setting distance 0 mm.97 in) CX-2 CX-11 Transparent object sensing type sensor CX-8 Our unique optical system and transparent object sensing circuit provide stable sensing of thinner transparent objects than the conventional models. Applications Detecting glossy electric appliances Detecting plastic bottles stacked on pallets Twice the sensing range! CX-82 CX-91 Transparent objects detectable with CX-8 (Typical examples) Sensing object Sensing object size (mm in) Glass sheet t=0.7 t=0.028 Cylindrical glass ø50 ø1.969 l =50 l =1.969 t=1. t=0.051 Acrylic board t=1.0 t=0.09 Styrol (Floppy case) t=0.9 t=0.05 Food wrapping film t= µm t=0.9 mil Cigarette case film t= µm t= mil Vinyl bag t=0 µm t=1.181 mil Pet bottle (500ml) ø66 ø2.598 Reflector setting range CX-81: 00 to 500 mm 11 to in CX-82: 1 to 2 m.281 to ft CX-8: 500 to 1,000 mm to 9.70 in [with the RF- reflector at the optimum condition (Note)] Each object should pass across the beam at the center between the sensor and the reflector. l : Length of cylindrical glasses t : Thickness of sensing object Note: The optimum condition is defined as the condition in which the sensitivity level is set such that the stability indicator just lights up when the object is absent. Passage confirmation of object on a conveyor belt CX-91 Detecting transparent film CX-81
6 Adjustable range reflective type CX-2 CX- CX times longer than before 00 mm 11 in Spot size 15 mm in approx. CX- High precision type CX-1/ 0 mm.97 in Spot diameter ø9 mm ø0.5 in approx. 50 mm in Spot diameter ø2 mm ø0.079 in approx. 50 mm in Spot diameter ø6.5 mm ø0.6 in approx. Can sense height differences as small as 0. mm in, with hysteresis of 2 % or less An advanced optical system provides sensing performance that is approx. 2.5 times than conventional models. Even ultra-small differences of 0. mm in can be detected accurately. 2.5 times the sensing capability! Hardly affected by colors Both black and white objects can be sensed at the same distances. No adjuster control is needed, even when products of different colors are moving along the production line. 0 % higher sensing capability Select from 2 spot diameters as per application Within the choice of 50 mm in sensing range sensors, we offer small spot type of approx. ø2 mm ø0.079 in optimal for detecting minute objects and large spot type of approx. ø6.5 mm ø0.6 in capable of sensing objects covered with holes and grooves. 0. mm in Height differences of as little as 0. mm in can be detected at a setting distance of mm in The difference in sensing range 1% or less between non-glossy white paper with a setting distance of 50 mm in and non-glossy gray paper with a brightness level of 5. CX-1 Spot diameter: ø2 mm ø0.079 in approx. [Positioning] Detects minute holes. CX- Spot diameter: ø6.5 mm ø0.6 in approx. Detecting a presence [ of object ] Ignores minute holes and accurately detects objects. The bright spot makes beam axis alignment easy All models These sensors have a high luminance red spot that provides bright visibility. The sensing position can be checked at a glance. Because the CX-1 sensor has a small spot beam, at approx. ø2 mm ø0.079 in, even the minutest object can be accurately detected. Can be used for sensing minute differences All models Equipped with a 5-turn adjuster so that even challenging range settings can be handled with ease. Great visibility approx. ø2 mm ø0.079 in high luminance spot CX-1 5
7 BGS / FGS functions make even the most challenging settings possible! The BGS function is best suited for the following case The FGS function is best suited for the following case BGS Background not present When object and background are separated Not affected if the background color changes or someone passes behind the conveyor. FGS Background present When object and background are close together When the object is glossy or uneven Unaffected by gloss, color or uneven surfaces when sensing objects present on a conveyor belt. Caution: Please use the FGS function together with a conveyor or other background unit. BGS (Background suppression) function The sensor judges that an object is present when light is received at position A of the light-receiving element (2-segment element). This is useful if the object and background are far apart. The distance adjustment method is the same as the conventional adjustment method for adjustable range reflective type sensors. FGS (Foreground suppression) function The sensor judges that an object is present when no light is received at position B of the light-receiving element (2-segment element). Accordingly, even objects that are glossy can be sensed. This is useful if the object and background are close together, or if the object being sensed is glossy. Background OFF Light element received B, or at light not received Moving object Object in the back Setting distance ON Light at element received A Element A Element B OFF in this condition only A B Lens Object absent OFF Emitting element ON in all other conditions Object present ON For glossy object ON Setting distance Conveyor Conveyor Conveyor Light received at position B A conveyor or other back-ground must be present Light received at position A Light is not received at position B, so an object is judged to be present Applications Small tablet detection Thin biscuit detection Passage confirmation Detects minute objects unaffected by glossy background objects. Uses FGS function. Stable sensing even for thin objects. Uses FGS function. Not affected by color variations in objects and background objects. Uses BGS function. CX-1 CX- CX-2 6
8 ORDER GUIDE Standard type Type Appearance Sensing range Model No. (Note 1) NPN output PNP output Output operation Emitting element m ft CX-11 CX-11-P Red LED Thru-beam Long sensing range 15 m 9.21 ft CX-12 CX-12-P 0 m 98. ft CX-1 CX-1-P Infrared LED Retroreflective With polarizing filters Long sensing range For transparent object sensing m 9.8 ft (Note 2) CX-91 CX-91-P 5 m 16.0 ft (Note 2) CX-9 CX-9-P 50 to 500 mm to in (Note 2) CX-81 CX-81-P 50 to 1,000mm to 9.7 in (Note 2) CX-8 CX-8-P 0.1 to 2 m 0.28 to ft (Note 2) CX-82 CX-82-P Switchable either Light-ON or Dark-ON Red LED Infrared LED 0 mm.97 in CX-2 CX-2-P Diffuse reflective 00 mm 11 in CX-21 CX-21-P 800 mm 1.96 in CX-22 CX-22-P Infrared LED Narrow-view 70 to 00 mm to 11 in CX-2 CX-2-P Red LED Adjustable range reflective Small spot CX-1 CX-1-P 2 to 50 mm to in CX- CX--P 15 to 0 mm to.97 in CX- CX--P to 00 mm to 11 in CX-2 CX-2-P Switchable either Detection-ON or Detection-OFF Red LED NOTE: Mounting bracket is not supplied with the sensor. Please select from the range of optional sensor mounting brackets. Notes: 1) The model No. with E shown on the label affixed to the thru-beam type sensor is the emitter, D shown on the label is the receiver. 2) The sensing range of the retroreflective type sensor is specified for the RF- reflector. The sensing range represents the actual sensing range of the sensor. The sensing ranges itemized in A of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object. Sensing range: A Sensing object Setting range of the reflector: B Reflector A B CX-91 CX-9 CX-81 CX-8 CX-82 0 to m 0 to 9.8 ft 0 to 5 m 50 to 500 mm 50 to 1,000 mm 0.1 to 2 m 0 to 16.0 ft to in to 9.7 in 0.28 to ft 0.1 to m 0.1 to 5 m 0 to 500 mm 0 to 1,000 mm 0.8 to 2 m 0.28 to 9.8 ft 0.28 to 16.0 ft.97 to in.97 to 9.7 in 2.6 to ft 7
9 ORDER GUIDE Basic type (Without operation mode switch and sensitivity adjuster. Cable is 0.5 m 0.02 in long.) Type Appearance Sensing range Model No.(Note 1) NPN output PNP output Output operation Emitting element CX-11A-C05 CX-11A-P-C05 Light-ON m ft Red LED Thru-beam Long sensing range 15 m 9.21 ft CX-11B-C05 CX-11B-P-C05 Dark-ON CX-12A-C05 CX-12A-P-C05 Light-ON CX-12B-C05 CX-12B-P-C05 Dark-ON Infrared LED Retroreflective With polarizing filters Optional (Note 2) m 9.8 ft (Note ) CX-91A-C05-Y CX-91A-P-C05-Y Light-ON CX-91B-C05-Y CX-91B-P-C05-Y Dark-ON Red LED NOTE: Mounting bracket is not supplied with the sensor. Please select from the range of optional sensor mounting brackets. Notes: 1) The model No. with E shown on the label affixed to the thru-beam type sensor is the emitter, D shown on the label is the receiver. 2) The reflector is sold separately. ) The sensing range of the retroreflective type sensor is specified for the RF- (optional) reflector. The sensing range represents the actual sensing range of the sensor. The sensing range: A of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object. Sensing range: A Sensing object Setting range of the reflector: B Reflector (Optional) A B CX-91 0 to m 0 to 9.8 ft 0.1 to m 0.28 to 9.8 ft 8
10 ORDER GUIDE 0.5 m 1.60 ft / 5 m 16. ft cable length types 0.5 m 1.60 ft / 5 m 16.0 ft cable length types (standard: 2 m ft, basic: 0.5 m 1.60 in) are also available. When ordering this type, suffix -C05 for the 0.5 m 1.60 ft cable length type, -C5 for the 5 m 16.0 ft cable length type to the model No. (Excluding CX- and basic type.) (e.g.) 0.5 m 1.60 ft cable length type of CX-11-P is CX-11-P-C05 5 m 16.0 ft cable length type of CX-11-P is CX-11-P-C5 M8 plug-in connector type, M12 pigtailed type M8 plug-in connector type and M12 pigtailed type are also available. When ordering this type, suffix -Z for the M8 connector type, -J for the M12 pigtailed type to the model No. (Please note that M12 pigtailed type is not available for CX-. Excluding basic type.) (e.g.) M8 connector type of CX-11-P is CX-11-P-Z M12 pigtailed type of CX-11-P is CX-11-P-J Mating cables (2 cables are required for the thru-beam type) For M8 plug-in connector type For M12 pigtailed type Type Model No. Cable length Description Straight Elbow 2-core -core CN-2A-C2 CN-2A-C5 CN-2AL-C2 CN-2AL-C5 CN-22-C2 CN-22-C5 CN-2-C2 CN-2-C5 Package without reflector NPN output type: CX-91-Y PNP output type: CX-91-P-Y 2 m ft 5 m 16.0 ft 2 m ft 5 m 16.0 ft 2 m ft 5 m 16.0 ft 2 m ft 5 m 16.0 ft Can be used with all models For thru-beam type emitter (2-core) Can be used with all models Mating cables CN-2A-C2 CN-2A-C5 CN-22-C2, CN-22-C5 CN-2-C2, CN-2-C5 CN-2AL-C2 CN-2AL-C5 ø9 mm ø0.5 in 2.1 mm in 1. mm 1.26 in ø mm ø in.5 mm in ø9 mm ø0.5 in ø mm ø in Accessory RF- (Reflector) ø1 mm ø0.551 in ø5 mm ø0.197 in 00 mm 11 in 9
11 OPTIONS Designation Round slit mask For thrubeam type sensor only Rectangular slit mask For thrubeam type sensor only Model No. Sensing range Min. sensing object Slit size Slit mask Slit on one side Slit on both sides Slit on one side Slit on both sides OS-CX-05 OS-CX-1 OS-CX-2 OS-CX-05 6 OS-CX-1 6 OS-CX-2 6 CX mm in mm in CX-12 ø0.5 mm ø0.0 in 600 mm in 0 mm in CX-1 1,0 mm 7.22 in 60 mm 2.62 in CX mm 5. in 0 mm.97 in CX-12 ø1 mm ø0.09 in 1.5 m.29 ft 150 mm in CX m ft 00 mm 11 in CX-11 2 m ft 00 mm in CX-12 ø2 mm ø0.079 in m 9.8 ft 600 mm in CX-1 6 m ft 1,0 mm 7.22 in CX-11 2 m ft 00 mm in CX mm in m 9.8 ft 600 mm in CX-1 6 m ft 1,0 mm 7.22 in CX-11 m 9.8 ft 1 m.281 ft CX mm in.5 m 1.76 ft 1.5 m.921 ft CX-1 9 m ft m 9.8 ft CX-11 5 m 16.0 ft 2 m ft CX mm in 7.5 m ft m 9.8 ft CX-1 15 m 9.21 ft 6 m ft ø12 mm ø0.72 in ø12 mm ø0.72 in ø12 mm ø0.72 in ø12 mm ø0.72 in ø12 mm ø0.72 in ø12 mm ø0.72 in ø0.5 mm ø0.0 in ø1 mm ø0.09 in ø1.5 mm ø0.059 in ø2 mm ø0.079 in ø mm ø0.118 in mm in 1 6 mm in 2 6 mm in Designation Model No. Sensing range Min. sensing object Interference prevention filter For CX-11 ( only ) PF-CX-V (Vertical, Silver) 2 pcs. per set PF-CX-H (Horizonal, Light brown) 2 pcs. per set 5 m 16.0 ft (Note 1) ø12 mm ø0.72 in (Note 1) Round slit mask OS-CX- Fitted on the front face of the sensor with onetouch. Round slit mask (Stainless steel) Reflector For retro- reflective type sensor only RF-2 RF-2 CX-91 1 m.281 ft (Note 2) CX m.921 ft (Note 2) CX-81 CX to 0. m to 0.98 ft (Note 2) CX to 0.6 m 0.28 to ft (Note 2) CX m.921 ft (Note 2) CX-9 m 9.8 ft (Note 2) CX to 00 mm to 11 in (Note 2) CX to 0.7 m 0.28 to ft (Note 2) CX to 1. m 0.28 to.265 ft (Note 2) ø0 mm ø1.181 in ø5 mm ø1.78 in RF-(Note ) CX-91 -Y m 9.8 ft (Note 2) ø50 mm ø1.969 in Notes: 1) Value when attached on both sides. 2) Set the distance between the CX-91 /9 and the reflector to 0.1 m 0.28 ft or more. However, see the table below for CX-8. The sensing range: A of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object. Sensing range: A Sensing object Setting range of the reflector: B Reflector RF-2 Reflector. mm 1.11 in Model No mm A B 0.50 in Reflector CX-81 RF-2 50 to 00 mm to 11 in 0 to 00 mm.97 to 11 in RF to 0.7 m 0.28 to ft 0.2 to 0.7 m to ft CX-8 RF to 0. m 0.28 to 0.98 ft 0.1 to 0. m 0.28 to 0.98 ft RF to 1 m 0.16 to.281 ft 0.1 to 1 m 0.28 to.281 ft CX-82 RF to 1. m 0.28 to.265 ft 0.5 to 1. m 1.60 to.265 ft RF to 0.6 m 0.28 to ft 0. to 0.6 m 0.98 to ft ) RF- is attached to the retroreflective type sensor other than the basic type. 11 mm 0. in RF-2 2. mm in Rectangular slit mask OS-CX- 6 Fitted on the front face of the sensor with onetouch. Interference prevention filter PF-CX-V (Vertical, Silver) PF-CX-H (Horizontal, Light brown) Two sets of CX-11 can be mounted close together. 5. mm 1.90 in 8. mm 0.27 in RF- 59. mm 2. in Rectangular slit mask (Stainless steel) Interference prevention filter 50. mm 1.98 in 8. mm 0.27 in
12 OPTIONS Designation Model No. Description Reflector mounting bracket MS-RF21-1 MS-RF22 Reflector mounting bracket Reflective tape mounting bracket (Note 1) MS-RF21-1 MS-RF22 MS-RF2 RF-11 RF-12 RF-1 MS-CX2-1 MS-CX2-2 MS-CX2- MS-CX2-5 MS-CX- MS-AJ1 MS-AJ2 Protective mounting bracket for RF-2 It protects the reflector from damage and maintains alignment. Sensing range (Note ): 0.5 m 1.60 ft [CX-91 ] 0.8 m 2.6 ft [CX-9 ] Sensing range (Note ): 0.7 m ft [CX-91 ] 1.2 m.97 ft [CX-9 ] 0.1 to 0.6 m 0.28 to ft [CX-82 ] Sensing range (Note 5): 0.5 m 1.60 ft [CX-91 ] For RF-2 For RF- Foot angled mounting bracket It can also be used for mounting RF-2. Foot biangled mounting bracket It can also be used for mounting RF-2. Protective mounting bracket Back biangled mounting bracket Back angled mounting bracket Horizontal mounting type Vertical mounting type Ambient temperature: - to +50 C -1 to +122 F Ambient humidity: 5 to 85 % RH Notes: 1) Keep the tape free from stress. If it is pressed too much, its capability may deteriorate. 2) Do not cut the tape. It will deteriorate the sensing performance. Ambient temperature: - to +55 C -1 to +11 F Ambient humidity: 5 to 85 % RH The thru-beam type sensor needs two brackets. Basic assembly Two M (length 12 mm 0.72 in) screws with washers are attached. MS-RF2 Reflective tape RF-11 8 mm 0.15 in RF-1 0 mm in 0.5 mm 0.0 in 0 mm in Two M (length 8 mm 0.15 in) screws with washers are attached. Two M (length mm 0.9 in) screws with washers are attached. 0.7 mm in RF-12 mm 0.98 in 0 mm in 0.7 mm in Universal sensor mounting stand (Note 2) MS-AJ1-A MS-AJ2-A Horizontal mounting type Vertical mounting type Lateral arm assembly 0 mm in checker (Note ) MS-AJ1-M MS-AJ2-M CHX-SC2 Horizontal mounting type Vertical mounting type Assembly for reflector It is useful for beam alignment of thru-beam type sensors. The optimum receiver position is given by indicators, as well as an audio signal. mounting bracket MS-CX2-1 MS-CX2-2 Notes: 1) The plug-in connector type sensor does not allow use of some sensor mounting brackets because of the protrusion of the connector. 2) Refer to the general catalog for details of the universal sensor mounting stand. ) Refer to the general catalog for details of the sensor checker CHX-SC2. ) Set the distance between the sensor and the reflective tape to 0.1 m 0.28 ft (CX-82 : 0. m 1.12 ft) or more. 5) Set the distance between the sensor and the reflective tape to 0.2 m ft or more. Universal sensor mounting stand MS-AJ1 MS-AJ1-A MS-AJ1-M 5 5 Elevation angle: ±5 MS-AJ2 5 5 Elevation angle: ±5 Swivel: 60 rotation Height adjustment: 150 mm in approx. Mounting hole for M6 screw Swivel: 60 rotation Height adjustment: 150 mm in approx. Mounting hole for M6 screw With the lateral arm, the sensor can sense from above a production line. Forward / back adjustment: mm in approx. 60 rotation 5 5 Angle adjustment: ±5 MS-AJ2-A With the lateral arm, the sensor can sense from above a production line. Forward / back adjustment: mm in approx. 60 rotation 5 5 Angle adjustment: ±5 Swivel: 60 rotation Height adjustment: 150 mm in approx. Mounting hole for M6 screw Swivel: 60 rotation Height adjustment: 150 mm in approx. Mounting hole for M6 screw 5 5 Elevation angle: ±5 MS-AJ2-M 5 5 Elevation angle: ±5 Swivel: 60 rotation Height adjustment: 150 mm in approx. Mounting hole for M6 screw Swivel: 60 rotation Height adjustment: 150 mm in approx. Mounting hole for M6 screw Two M (length 12 mm 0.72 in) screws with washers are attached. MS-CX2- Two M (length 1 mm in) screws with washers are attached. MS-CX- checker CHX-SC2 Two M (length 12 mm 0.72 in) screws with washers are attached. MS-CX2-5 Two M (length 12 mm 0.72 in) screws with washers are attached. checker Two M (length 12 mm 0.72 in) screws with washers are attached. POWER CHX-SC2 LEVEL 11
13 SPECIFICATIONS Standard type Model No. Type Thru-beam Retroreflective Diffuse reflective Long sensing range With polarizing filters Long sensing range For transparent object sensing Narrow-view NPN output CX-11 CX-12 CX-1 CX-91 CX-9 CX-81 CX-8 CX-82 CX-2 CX-21 CX-22 CX-2 Item PNP output CX-11-P CX-12-P CX-1-P CX-91-P CX-9-P CX-81-P CX-8-P CX-82-P CX-2-P CX-21-P CX-22-P CX-2-P Applicable CE marking directive Sensing range Sensing object m ft 15 m 9.21 ft 0m 98. ft ø12 mm ø0.72 in or more opaque object (Note ) m 9.8 ft (Note 2) ø50 mm ø1.969 in or more opaque, translucent or specular object (Note 2, 5) 5 m 16.0 ft (Note 2) ø50 mm ø1.969 in or more opaque or translucent object (Note 2, 5) EMC Directive, RoHS Directive 50 to 500 mm to in (Note 2) 50 to 1,000mm to 9.7 in (Note 2) 0.1 to 2 m 0.28 to ft (Note 2) ø50 mm ø1.969 in or more transparent, translucent or opaque object (Note 2, 5) 0 mm.97 in (Note ) 00 mm 11 in (Note ) 800 mm 1.96 in (Note ) Opaque, translucent or transparent object (Note 5) 70 to 00 mm to 11 in (Note ) Opaque, translucent or transparent object (Note 5) Min. sensing object: ø0.5 mm ( ø0.0 in copper wire ) Hysteresis 15 % or less of operation distance (Note ) Repeatability (perpendicular to sensing axis) 0.5 mm 0.0 in or less 1 mm 0.09 in or less 0.5 mm 0.0 in or less Supply voltage 12 to 2 V DC ± % Ripple P-P % or less Current consumption Emitter: 15 ma or less Emitter: ma or less Emitter: ma or less Receiver: ma or less Receiver: ma or less Receiver: ma or less 1 ma or less ma or less 1 ma or less 15 ma or less Output <NPN output type> NPN open-collector transistor Maximum sink current: 0 ma Applied voltage: 0 V DC or less (between output and 0 V) Residual voltage: 2 V or less (at 0 ma sink current) 1 V or less (at 16 ma sink current) <PNP output type> PNP open-collector transistor Maximum source current: 0 ma Applied voltage: 0 V DC or less (between output and +V) Residual voltage: 2 V or less (at 0 ma source current) 1 V or less (at 16 ma source current) Output operation Short-circuit protection Switchable either Light-ON or Dark-ON Incorporated Response time 1 ms or less 2 ms or less 1 ms or less Operation indicator Stability indicator Power indicator Sensitivity adjuster Automatic interference prevention function Environmental resistance Protection Orange LED (lights up when the output is ON)(incorporated on the receiver for thru-beam type) Green LED (lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type) Green LED (lights up when the power is ON) (incorporated on the emitter) Continuously variable adjuster (incorporated on the receiver for thru-beam type) Two units of sensors can be mounted close together with interference Incorporated (Two units of sensors can be mounted close together.) prevention filters. (Sensing range: 5 m 16.0 ft) IP67 (IEC) Ambient temperature - to +55 C -1 to +11 F (No dew condensation or icing allowed), Storage: -0 to +70 C -22 to +158 F Ambient humidity Ambient illuminance Voltage withstandability Insulation resistance Vibration resistance Shock resistance 5 to 85 % RH, Storage: 5 to 85 % RH Incandescent light:,000 lx at the light-receiving face 1,000 V AC for one min. between all supply terminals connected together and enclosure MΩ, or more, with 0 V DC megger between all supply terminals connected together and enclosure to 500 Hz frequency, 1.5 mm in double amplitude ( G max.) in X, Y and Z directions for two hours each 500 m/s 2 acceleration (50 G approx.) in X, Y and Z directions three times each Emitting element (modulated) Red LED Infrared LED Red LED Infrared LED Infrared LED Red LED Material Cable Peak emission wavelength 680 nm mil 870 nm 0.0 mil 850 nm 0.0 mil 680 nm mil 650 nm mil 870 nm 0.0 mil 860 nm 0.0 mil 65 nm 0.0 mil Cable extension Weight Enclosure: PBT (Polybutylene terephthalate), Lens: Acrylic (CX-8 : Polycarbonate), Indicator cover: Acrylic (CX-8 : Polycarbonate) 0.2 mm 2 -core (thru-beam type emitter: 2-core) cabtyre cable, 2 m ft long Extension up to total 0 m ft is possible with 0. mm 2, or more, cable (thru-beam type: both emitter and receiver) Net Emitter: 5 g approx., Receiver: 50 g approx. 50 g approx. Gross 0 g approx. 80 g approx. 60 g approx. Accessories RF- (Reflector): 1 pc. Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +2 C +7. F. 2) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF- reflector. The sensing range represents the actual sensing range of the sensor. The sensing range: A of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object. Sensing range: A Sensing object Setting range of the reflector: B Reflector A B CX-91 CX-9 CX-81 CX-8 CX-82 0 to m 0 to 9.8 ft 0.1 to m 0.28 to 9.8 ft 0 to 5 m 0 to 16.0 ft 0.1 to 5 m 0.28 to 16.0 ft 50 to 500 mm to in 0 to 500 mm.97 to in 50 to 1,000 mm to 9.7 in 0 to 1,000 mm.97 to 9.7 in 0.1 to 2 m 0.28 to ft 0.8 to 2 m 2.6 to ft ) The sensing range and hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (0 0 mm in) as the object. ) If slit masks (optional) are fitted, an object of ø0.5 mm ø0.0 in (using round slit mask) can be detected. 5) Make sure to confirm detection with an actual sensor before use. 12
14 SPECIFICATIONS Standard type Model No. Type Adjustable range reflective Small spot NPN output CX-1 CX- CX- CX-2 Item PNP output CX-1-P CX--P CX--P CX-2-P Applicable CE marking directive EMC Directive, RoHS Directive Adjustable range (Note 2) to 50 mm to in to 0 mm to.97 in 0 to 00 mm to 11 in Sensing range (with white non-glossy paper) 2 to 50 mm to in 15 to 0 mm to.97 in to 00 mm to 11 in Hysteresis (with white non-glossy paper) Repeatability Supply voltage Current consumption 2 % or less of operation distance 5 % or less of operation distance Along sensing axis: 1 mm 0.09 in or less, Perpendicular to sensing axis: 0.2 mm in or less (with white non-glossy paper) 12 to 2 V DC ± % Ripple P-P % or less ma or less Output <NPN output type> NPN open-collector transistor Maximum sink current: 0 ma Applied voltage: 0 V DC or less (between output and 0 V) Residual voltage: 2 V or less (at 0 ma sink current) 1 V or less (at 16 ma sink current) <PNP output type> PNP open-collector transistor Maximum source current: 0 ma Applied voltage: 0 V DC or less (between output and +V) Residual voltage: 2 V or less (at 0 ma source current) 1 V or less (at 16 ma source current) Output operation Short-circuit protection Response time Operation indicator Switchable either Detection-ON or Detection-OFF Incorporated 1 ms or less Orange LED (lights up when the output is ON) Stability indicator Green LED (lights up under stable operating condition) (Note ) Distance adjuster Sensing mode Automatic interference prevention function (Note ) Protection 5-turn mechanical adjuster BGS / FGS functions Switchable with wiring of sensing mode selection input Incorporated IP67 (IEC) Environmental resistance Ambient temperature - to +55 C -1 to +11 F (No dew condensation or icing allowed), Storage: -0 to +70 C -22 to +158 F Ambient humidity 5 to 85 % RH, Storage: 5 to 85 % RH Ambient illuminance Incandescent light:,000 lx at the light-receiving face Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure Insulation resistance MΩ, or more, with 0 V DC megger between all supply terminals connected together and enclosure Vibration resistance to 500 Hz frequency, mm in double amplitude ( G max.) in X, Y and Z directions for two hours each Shock resistance Emitting element Spot diameter Material Cable Cable extension ø2 mm ø0.079 in approx. (at 50 mm in distance) 500 m/s 2 acceleration (50 G approx.) in X, Y and Z directions three times each Red LED (Peak emission wavelength: 650 nm mil, modulated) ø6.5 mm ø0.6 in approx. (at 50 mm in distance) ø9 mm ø0.5 in approx. (at 0 mm.97 in distance) 15 mm in approx. (at 00 mm 11 in distance) Enclosure: PBT (Polybutylene terephthalate), Lens: Polycarbonate, Indicator cover: Polycarbonate 0.2 mm 2 -core cabtyre cable, 2 m ft long Extension up to total 0 m ft is possible with 0. mm 2, or more, cable. Weight Net weight: 55 g approx., Gross weight: 65 g approx. Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +2 C +7. F. 2) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can detect an object 2 mm in [CX-(-P): 15 mm in, CX-2(-P): mm in], or more, away. Actual sensing range of the sensor: A A CX-1 / CX- CX-2 2 to 50 mm to in 15 to 0 mm to.97 in to 00 mm to 11 in Adjustable range: B Sensing object B to 50 mm to in to 0 mm to.97 in 0 to 00 mm to 11 in ) Refer to the manual or the general catalog for operation of the stability indicator. ) Note that detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object. 1
15 SPECIFICATIONS Basic type Thru-beam Retroreflective Type Long sensing range With polarizing filters Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ON Model No. NPN output CX-11A-C05 CX-11B-C05 CX-12A-C05 CX-12B-C05 CX-91A-C05-Y CX-91B-C05-Y Item PNP output CX-11A-P-C05 CX-11B-P-C05 CX-12A-P-C05 CX-12B-P-C05 CX-91A-P-C05-Y CX-91B-P-C05-Y Applicable CE marking directive EMC Directive, RoHS Directive Sensing range m ft 15 m 9.21 ft m 9.8 ft (Note 2) Sensing object ø12 mm ø0.72 in or more opaque object (Note ) ø50 mm ø1.969 in or more transparent, translucent or opaque object (Note 2, ) Hysteresis Repeatability (perpendicular to sensing axis) 0.5 mm 0.0 in or less Supply voltage 12 to 2 V DC ± % Ripple P-P % or less Current consumption Emitter: 15 ma or less Receiver: ma or less Emitter: ma or less Receiver: ma or less 1 ma or less Output <NPN output type> NPN open-collector transistor Maximum sink current: 0 ma Applied voltage: 0 V DC or less (between output and 0 V) Residual voltage: 2 V or less (at 0 ma sink current) 1 V or less (at 16 ma sink current) <PNP output type> PNP open-collector transistor Maximum source current: 0 ma Applied voltage: 0 V DC or less (between output and +V) Residual voltage: 2 V or less (at 0 ma source current) 1 V or less (at 16 ma source current) Short-circuit protection Response time Operation indicator Stability indicator Incorporated 1 ms or less Orange LED (lights up when the output is ON)(incorporated on the receiver for thru-beam type) Green LED (lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type) Power indicator Green LED (lights up when the power is ON) (incorporated on the emitter) Sensitivity adjuster Automatic interference prevention function Two units of sensors can be mounted close together with interference prevention filters. (Sensing range: 5 m 16.0 ft) Incorporated (Two units of sensors can be mounted close together.) Environmental resistance Protection IP67 (IEC) Ambient temperature - to +55 C -1 to +11 F (No dew condensation or icing allowed), Storage: -0 to +70 C -22 to +158 F Ambient humidity Ambient illuminance Voltage withstandability Insulation resistance Vibration resistance Shock resistance 5 to 85 % RH, Storage: 5 to 85 % RH Incandescent light:,000 lx at the light-receiving face 1,000 V AC for one min. between all supply terminals connected together and enclosure MΩ, or more, with 0 V DC megger between all supply terminals connected together and enclosure to 500 Hz frequency, 1.5 mm in double amplitude ( G max.) in X, Y and Z directions for two hours each 500 m/s 2 acceleration (50 G approx.) in X, Y and Z directions three times each Emitting element (modulated) Red LED Infrared LED Red LED Material Cable Peak emission wavelength 680 nm mil 870 nm 0.0 mil 680 nm mil Cable extension Weight Enclosure: PBT (Polybutylene terephthalate), Lens: Acrylic, Indicator cover: Acrylic 0.2 mm 2 -core (thru-beam type emitter: 2-core) cabtyre cable, 0.5 m 1.60 ft long Extension up to total 0 m ft is possible with 0. mm 2, or more, cable (thru-beam type: both emitter and receiver) Net Emitter: g approx., Receiver: g approx. g approx. Gross 50 g approx. 0 g approx. Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +2 C +7. F. 2) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF- reflector (optional). The sensing range represents the actual sensing range of the sensor. The sensing range: A of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object. Sensing range: A Sensing object Setting range of the reflector: B Reflector (Optional) A B CX-91 0 to m 0 to 9.8 ft 0.1 to m 0.28 to 9.8 ft ) If slit masks (optional) are fitted, an object of ø0.5 mm ø0.0 in (using round slit mask) can be detected. ) Make sure to confirm detection with an actual sensor before use. 1
16 I/O CIRCUIT AND WIRING DIAGRAMS NPN output type I/O circuit diagram circuit Tr D D Internal circuit Color code / Connector pin No. of the connector type (Brown / 1) +V (Black / ) Output (Note 1) Load ZD 0 ma max. ZD (Blue / ) 0 V *1 (Pink / 2) Sensing mode selection input (Note 2, ) User s circuit + 12 to 2 V DC ± % Notes: 1) The emitter of the thru-beam type sensor does not incorporate the output. 2) Sensing mode selection input is incorporated only for the CX- adjustable range reflective type. When using the CX-, be sure to wire the sensing mode selection input (pink / 2) as mentioned * 1. Unstable operation may occur. ) When the mating cable is connected to the plug-in connector type of CX-, its color is white. *1 Sensing mode selection input BGS function: Connect to 0 V FGS function: Connect to +V Symbols... D : Reverse supply polarity protection diode ZD : Surge absorption zener diode Tr : NPN output transistor Wiring diagram Brown Load Black (Note 1) Blue *1 Pink (Note 2, ) + 12 to 2 V DC ± % Notes: 1) The emitter of the thru-beam type sensor does not incorporate the black wire. 2) The pink wire is incorporated only for the CX- adjustable range reflective type. When using the CX-, be sure to wire the pink wire as mentioned * 1. Unstable operation may occur. ) When the mating cable is connected to the plug-in connector type of CX-, its color is white. *1 Sensing mode selection input BGS function: Connect to 0 V FGS function: Connect to +V Connector pin position M8 plug-in connector type 2 Sensing mode selection input (Note 2) 1 +V Output (Note 1) 0 V M12 pigtailed type 2 Not connected 0 V 1 +V Output (Note 1) Notes: 1) The emitter of the thru-beam type sensor does not incorporate the output. 2) Sensing mode selection input is incorporated only for the CX- adjustable range reflective type. When using the CX-, be sure to wire the sensing mode selection input (pink / 2). Unstable operation may occur. 15 PNP output type I/O circuit diagram circuit Tr D D ZD ZD Internal circuit Color code / Connector pin No. of the connector type (Brown / 1) +V User s circuit 0 ma max. (Black / ) Output (Note 1) Load (Blue / ) 0 V *1 (Pink / 2) Sensing mode selection input (Note 2, ) + 12 to 2 V DC ± % Notes: 1) The emitter of the thru-beam type sensor does not incorporate the output. 2) Sensing mode selection input is incorporated only for the CX- -P adjustable range reflective type. When using the CX- -P, be sure to wire the sensing mode selection input (pink / 2) as mentioned * 1. Unstable operation may occur. ) When the mating cable is connected to the plug-in connector type of CX- -P, its color is white. *1 Sensing mode selection input BGS function: Connect to 0 V FGS function: Connect to +V Symbols... D : Reverse supply polarity protection diode ZD : Surge absorption zener diode Tr : PNP output transistor Wiring diagram Brown Black (Note 1) Blue *1 Pink (Note 2, ) Load + 12 to 2 V DC ± % Notes: 1) The emitter of the thru-beam type sensor does not incorporate the black wire. 2) The pink wire is incorporated only for the CX- -P adjustable range reflective type. When using the CX- -P, be sure to wire the pink wire as mentioned * 1. Unstable operation may occur. ) When the mating cable is connected to the plug-in connector type of CX- -P, its color is white. *1 Sensing mode selection input BGS function: Connect to 0 V FGS function: Connect to +V Connector pin position M8 plug-in connector type 2 Sensing mode selection input (Note 2) 1 +V Output (Note 1) 0 V M12 pigtailed type 2 Not connected 0 V 1 +V Output (Note 1) Notes: 1) The emitter of the thru-beam type sensor does not incorporate the output. 2) Sensing mode selection input is incorporated only for the CX- -P adjustable range reflective type. When using the CX- -P, be sure to wire the sensing mode selection input (pink / 2). Unstable operation may occur.
17 PRECAUTIONS FOR PROPER USE Never use this product as a sensing device for personnel protection. In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. Mounting The tightening torque should be 0.5 N m or less. M (length 12 mm 0.72 in) screw with washers mounting bracket (Optional) Wiring Make sure that the power supply is off while wiring. Take care that wrong wiring will damage the sensor. Verify that the supply voltage variation is within the rating. If power is supplied from a commercial switching regulator, ensure that the frame ground (F.G.) terminal of the power supply is connected to an actual ground. In case noise generating equipment (switching regulator, inverter motor, etc.) is used in the vicinity of this product, connect the frame ground (F.G.) terminal of the equipment to an actual ground. Do not run the wires together with high-voltage lines or power lines or put them in the same raceway. This can cause malfunction due to induction. Extension up to total 0 m ft (thru-beam type: both emitter and receiver) is possible with 0. mm 2, or more, cable. However, in order to reduce noise, make the wiring as short as possible. Make sure that stress by forcible bend or pulling is not applied directly to the sensor cable joint. Others This product has been developed / produced for industrial use only. Do not use during the initial transient time (50 ms) after the power supply is switched on. Take care that the sensor is not directly exposed to fluorescent light from a rapid-starter lamp or a high frequency lighting device, as it may affect the sensing performance. This sensor is suitable for indoor use only. Do not use this sensor in places having excessive vapor, dust, etc., or where it may come in direct contact with water or corrosive gas. Take care that the sensor does not come in direct contact with water, oil, grease or organic solvents, such as, thinner, etc. This sensor cannot be used in an environment containing inflammable or explosive gases. Never disassemble or modify the sensor. DIMENSIONS (Unit: mm in) The CAD data can be downloaded from the website. CX-1 CX-1 -Z Sensitivity adjuster (Note 1) Operation indicator (Orange)(Note 2) Sensitivity adjuster (Note 1) Operation indicator (Orange)(Note 2) Stability indicator (Green)(Note ) Beam axis M thru-hole threads Operation mode switch (Note 1) ø.7 ø0.16 cable, 2 m ft long (Note ) -core (emitter: 2-core) 0.2 mm 2 insulator diameter: ø1.2 ø0.07 Notes: 1) Not incorporated on the emitter and the basic type sensor. 2) It is the power indicator (green) on the emitter. ) Not incorporated on the emitter. ) Basic type: 0.5 m 1.60 ft long Stability indicator (Green)(Note 1) Operation mode switch (Note 1) Beam axis ø9. ø M thru-hole threads M8 connector Notes: 1) Not incorporated on the emitter. 2) It is the power indicator (green) on the emitter. 16
18 DIMENSIONS (Unit: mm in) The CAD data can be downloaded from the website. CX-1 -J CX-9 CX-8 CX-2 Sensitivity adjuster (Note 1) Operation indicator (Orange)(Note 2) Sensitivity adjuster (Note 1) Operation indicator (Orange) Stability indicator (Green)(Note 1) Beam axis M thru-hole threads Operation mode switch (Note 1) M12 connector ( 1.72 ) ø.7 ø0.16 cable 00 ( 11) Notes: 1) Not incorporated on the emitter. 2) It is the power indicator (green) on the emitter. Beam-receiving part Beam-emitting part Stability indicator (Green) Center of sensing M thru-hole threads Operation mode switch (Note 1) Notes: 1) Not incorporated on the Bacic type sensors. 2) Basic type: 0.5 m 1.60 ft long ø.7 ø0.16 cable, 2 m ft long (Note 2) -core 0.2 mm 2 insulator diameter: ø1.2 ø0.07 CX-9 -Z CX-8 -Z CX-2 -Z CX-9 -J CX-8 -J CX-2 -J Sensitivity adjuster Operation indicator (Orange) Sensitivity adjuster Operation indicator (Orange) Beam-receiving part Beam-emitting part ø9. ø0.70 Center of sensing Stability indicator (Green) M thru-hole threads Operation mode switch M8 connector Beam-receiving part Beam-emitting part Stability indicator (Green) Center of sensing M thru-hole threads 2. ( ) Operation mode switch M12 connector ( 1.72 ) ø.7 ø0.16 cable 00 ( 11) CX- CX- -Z Operation indicator (Orange) Distance adjuster (5-turn) Operation mode switch Operation indicator (Orange) Distance adjuster (5-turn) Operation mode switch Center of sensing Stability indicator (Green) Beamreceiving part Beamemitting part M thru-hole threads ø.7 ø0.16 cable, 2 m ft long -core 0.2mm2 insulator diameter: ø1.2 ø0.07 Stability indicator (Green) Beamreceiving part Beamemitting part 1.67 Center of sensing ø M thru-hole threads M8 connector 17
19 DIMENSIONS (Unit: mm in) The CAD data can be downloaded from the website. RF- Reflector (Accessory for the retroreflective type sensor) RF-2 Reflector (Optional) RF-2 Reflector (Optional) Material: Acrylic (Reflector) ABS (Base) 0 ( 1.181) ø.6 ø0.181 mounting holes Material: Acrylic (Reflector) ABS (Base) 21 ( 0.827) 2-ø.6 ø0.12 mounting holes Reflector M nut mounting holes (for mounting at the back) Base 2-ø. ø0.1 thru-holes (for mounting at the side) 2-ø. ø0.1 holes, deep (for mounting at the back) 2-M nut mounting holes (for mounting at the side) Material: Acrylic (Reflector) ABS (Base) Two M (length 8 mm 0.15 in) screws with washers and two nuts are attached. RF-11 Reflective tape (Optional) RF-12 Reflective tape (Optional) RF-1 Reflective tape (Optional) ( 1.2) Effective reflecting surface Adhesive tape ( 1.2) Reflective surface (Acrylic) Rear surface pressure-sensitive adhesive Material: Acrylic Effective reflecting surface Material: Flexible polyvinyl chloride Adhesive tape MS-CX2-1 t 1.2 t Material: Stainless steel (SUS0) Two M (length 12 mm 0.72 in) screws with washers are attached R12 R R R ø. ø0.1 holes (for RF-2) 0.9 Assembly dimensions Mounting drawing with the receiver of CX Beam axis mounting bracket (Optional) R12 R t 1.2 t
20 SENSOR SENSOR DIMENSIONS (Unit: mm in) The CAD data can be downloaded from the website. MS-CX2-2 mounting bracket (Optional) Assembly dimensions Mounting drawing with the receiver of CX ø. ø0.1 holes R12 R t t Material: Stainless steel (SUS0) 7.8 Two M (length 12 mm 0.72 in) screws 0.07 with washers are attached t 2 t Beam axis R12 R MS-CX2- mounting bracket (Optional) ø ø0.98 R R Material: Stainless steel (SUS0) Two M (length 1 mm in) screws with washers are attached ø55 ø2.165 ø9 ø t 2.5 t R9.5 R0.7 Assembly dimensions Mounting drawing with the receiver of CX-1 SENSOR ø55 ø2.165 ø9 ø Beam axis t 2.5 t SENSOR MS-CX2-5 mounting bracket (Optional) t 1.5 t R19 R0.78 R R Assembly dimensions Mounting drawing with the receiver of CX t 1.5 t R R Beam axis Material: Stainless steel (SUS0) 7.9 Two M (length 12 mm 0.72 in) screws 0.11 with washers are attached
CX-400 SERIES Ver.2. Compact Photoelectric Sensor. Sensors that are environmentally and user friendly.
291 Compact Photoelectric Sensor Related Information SERIES Ver.2 General terms and conditions... F-17 Sensor selection guide... P.283~ MS-AJ / CHX-SC2...P.919 / P.920 Glossary of terms / General precautions...
More informationCX-400SERIES. World Standard. Strong, High and Less are the keywords understood internationally COMPACT PHOTOELECTRIC SENSOR. Amplifier Built-in
PHOTOELECTRIC SENSOR COMPACT PHOTOELECTRIC SENSOR Amplifier Built-in SERIES Conforming to EMC Directive UL Recognition World Standard Strong, High and Less are the keywords understood internationally We
More informationIncludes an analog CMOS processor ASIC
The world standard CX-00 series s that are environmentally and user friendly. The total lineup of 18 models covers through the inclusion of a newly developed custom integrated circuit. This CX-00 series
More informationFEATURES. 15 m ft. 4 m ft. 2 m ft. 100 mm in. 600 mm in. 15 m ft. 4 m ft. 2 m ft. 100 mm 3.
273 Cylindrical Photoelectric Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1549~ guide... P.231~ General precautions... P.1552~ PHOTO PHOTO MEASURE -LS200
More informationStandard type. Basic type. 1 Stability indicator (green) 2 Operation indicator (orange) 4 Operation mode switch. 5 Power indicator (green)
INSTRUCTIS Compact Photoelectric Sensor CX-00 Series MEUEN-CX00 V. Thank you for purchasing products from Panasonic. Please read this Instruction Manual carefully and thoroughly for the correct and optimum
More informationCX-440SERIES. Hysteresis 2 % & Difference in sensing range between white and black 1 %
COMPACTADJUSTABLE RANGE REFLECTIVE PHOTOELECTRIC SENSOR Amplifier Built-in CX-SERIES Conforming to EMC Directive UL Recognition Hysteresis % & Difference in sensing range between white and black 1 % Ultra
More informationEasy to replace. A pigtailed type sensor with connector (CY- -J), which is easy to replace, is also available. Environment resistant
EQ- VF NX PM PM MS-AJ RT-6 PX- PHOTOELECTRIC SENSORS Mounting Stand SERIES Cylindrical Photoelectric Test input PNP output Light intensity type available monitor M This sensor has an M size for convenient
More informationUSER S MANUAL. EX-20 Series. Amplifier Built-in Ultra-compact Type Photoelectric Sensor
Amplifier Built-in Ultra-compact Type Photoelectric Sensor EX-20 Series USER S MANUAL WUME-EX20-3 Contens 1. Cautions 3 2. Part Description 4 3. Mounting 6 3-1 Mounting the sensor 6 3-2 Mounting to sensor
More informationCylindrical Photoelectric Sensor
SERIES Cylindrical Photoelectric Amplifier Built-in Cylindrical type easily mountable with M Conforming to EMC Directive AC supply type conforms to Low Voltage Directive, too. ( ) UL Recognition M This
More informationCX-400SERIES. World Standard. Strong, High and Less are keywords that everyone in the world understands COMPACT PHOTOELECTRIC SENSOR
PHOTOEECTRIC SENSOR COMPACT PHOTOEECTRIC SENSOR Amplifier Built-in SERIES Conforming to EMC Directive U Recognition World Standard Strong, High and ess are keywords that everyone in the world understands
More informationCX-20 SERIES. General purpose photoelectric sensor with full basic performance. Compact Photoelectric Sensor OTHER SUNX PRODUCTS
OTHER SUNX PRODUCTS CX- SERIES Compact Photoelectric Diagnosis Self-diagnosis PNP output Light intensity Interference type available monitor prevention Amplifier Built-in UL Recognition General purpose
More informationNA1-PK3 SERIES. Compact Size Picking Sensor. Boasts a compact, pocket lighter size enabling universal installation
44 PHOTO PHOTO Compact Size Sensor NA-PK SERIES Related Information General terms and conditions... F- Glossary of terms... P.549~ guide... P.49~ General precautions...p.55~ Recognition Make sure to use
More informationCompact Photoelectric Sensor
CX-00 Photoelectric s Compact Photoelectric The CX-00 series of photoelectric sensors is a wide-ranging lineup of 116 different models. Whatever your application entails, SUNX has covered it with this
More informationNA1-11. Small / Slim Object Detection Area Sensor. Cross-beam scanning system to detect slim objects
929 PHOTO PHOTO MEASURE Object Area Sensor General terms and conditions... F-3 Related Information Glossary of terms... P.1549~ panasonic.net/id/pidsx/global guide...p.85~ General precautions... P.1552~
More informationNA1-PK3 SERIES. Compact Size Picking Sensor. Boasts a compact, pocket lighter size enabling universal installation
497 Compact Size Sensor NA-PK SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.59~ Sensor selection guide... P.475~ General precautions...p.5 PHOTO PHOTO Conforming
More informationUSER S MANUAL. EX-30 Series. Amplifier Built-in Type Threaded Miniature Photoelectric Sensor
Amplifier Built-in Type Threaded Miniature Photoelectric Sensor EX-30 Series USER S MANUAL WUME-EX30-3 Contents 1. Cautions 3 2. Part Description 4 3. Mounting 5 3-1 Mounting the sensor 5 3-2 Installation
More informationUSER S MANUAL. NX-5 Series. Power Supply Built-in Compact Multi-voltage Photoelectric Sensor
Power Supply Built-in Compact Multi-voltage Photoelectric Sensor NX-5 Series USER S MANUAL WUME-NX5-3 Contents 1. Cautions 3 2. Part description 4 3. Mounting 6 3-2 Mounting interval (thru-beam type NX5-M
More informationUltra-slim Body Picking Sensor NA1-PK5 SERIES NA1-5 SERIES. Even a slim hand is detectable by the 25 mm in pitch beam area sensor
43 PHOTO PHOTO Ultra-slim Sensor NA-PK5 SERIES SERIES General terms and conditions... F-3 guide... P.49~ Related Information Glossary of terms... P.549~ General precautions... P.55~ Recognition Make sure
More informationEX-40 SERIES. Convergent Reflective Photoelectric Sensor. Reliable object detection in limited area. Stable convergent distance sensing
313 PHOTO PHOTO Convergent Reflective Photoelectric EX-4 SERIES Related Information General terms and conditions... F-3 Glossary of terms / General precautions...p.1549~ / P.1552~ guide... P.231~ Korea
More informationGeneral Purpose & Slim Body Area Sensor NA2-N SERIES. Slim body 13 mm in Maximum sensing height 540 mm in
PHOTO PHOTO General Purpose & Area Sensor NA-N SERIES Related Information General terms and conditions... F- Glossary of terms / General precautions...p.59~ / P.55~ guide... P.9~ Korea s S-mark... P.0
More informationUltra-slim Body Picking Sensor NA1-PK5 SERIES NA1-5 SERIES. Even a slim hand is detectable by the 25 mm in pitch beam area sensor
473 PHOTO PHOTO Ultra-slim Sensor NA-PK5 SERIES SERIES General terms and conditions... F-7 Sensor selection guide... P.4~ Related Information Glossary of terms... P.455~ General precautions... P.458~ Conforming
More informationNA DigiParts GmbH. Small / Slim Object Detection Area Sensor
953 PHOTO PHOTO MEASURE ITY Object Area Sensor General terms and conditions... F-7 Related Information Glossary of terms... P.1455~ Cross-beam scanning system to detect slim objects Letters or business
More informationEmitting and receiving element pitch: 10 mm in
Small / Slim Object Detection Area Sensor Cross-beam scanning system to detect slim objects Letter or visiting card detectable! Slim objects can be detected by using the cross-beam scanning system. Emitting
More informationNA1-11. Small / Slim Object Detection Area Sensor. Cross-beam scanning system to detect slim objects. Letters or business cards detectable!
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
More informationLong sensing range. Most suitable for conveyor lines and parking lot applications. 10 m ft (Red LED)
SERIES Compact Multi-voltage Photoelectric Multi-voltage Interference prevention Multi-voltage The series can operate a to 2 V AC or to 2 V DC, which makes it suitable for supply voltages all over the
More informationUltra-slim Body Picking Sensor NA1-PK5 SERIES NA1-5 SERIES. Even a slim hand is detectable by the 25 mm in pitch beam area sensor
487 Ultra-slim Sensor NA-PK5 SERIES SERIES General terms and conditions... F-7 Sensor selection guide... P.475~ Related Information Glossary of terms... P.359~ General precautions... P.45 PHOTO PHOTO Conforming
More informationCX-20. Amplifier Built-in Compact Photoelectric Sensor. General Purpose Photoelectric Sensor with Full Basic Performance SERIES.
CX- SERIES Amplifier Built-in Compact Photoelectric General Purpose Photoelectric with Full Basic Performance Marked Conforming to EMC Directive Compact Size Two s Mountable Together Waterproof Just mm
More informationTriple Beam Adjustable Range Reflective Photoelectric Sensor Amplifier Built-in. panasonic.net/id/pidsx/global
337 Triple Beam Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1549~ guide... P.231~ General precautions... P.1552~ PHOTO
More informationAmplifier Built-in Cylindrical Photoelectric Sensor
PHOTOEECTRIC SENSORS EQ- SERIES Amplifier Built-in Cylindrical Photoelectric Cylindrical Type Easily Mountable with M Thread - Marked Conforming to EMC Directive AC supply type conforms to ( ow Voltage
More informationSS-A5 SERIES SH SERIES
395 Manually Sensitivity Set Photoelectric Sensor SS-A5 SERIES SH SERIES Amplifi er-separated General terms and conditions... P.1 Sensor selection guide...p.11~ / P.9~ Related Information SH Specifications
More informationTriple Beam Adjustable Range Reflective Photoelectric Sensor Amplifier Built-in
371 Triple Beam Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.1455~ selection guide... P.271~ General precautions... P.1458~
More informationM-DW1. Wafer Mapping Sensor. The safe LED beam reflective type wafer mapping sensor. Safe LEDs adopted. Sensing of nitride-coated wafers possible
915 PHOTO PHOTO OPTIS Mapping Sensor General terms and conditions... F3 Related Information General precautions... P.1552~ guide... P.865~ Recognition MEASURE CTROL panasonic.net/id/pidsx/global The safe
More informationLX-100 SERIES. Digital Mark Sensor Amplifier Built-in. Introduction of the 3 LED mark sensor 4:1. Can detect any mark!
899 PHOTO PHOTO Digital Mark Sensor Amplifier Built-in SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.149~ guide...p.86~ General precautions... P.12~ Recognition
More informationTwin adjuster enables delicate sensitivity setting
PHOTOELECTRIC SENSORS Manually Sensitivity Set Photoelectric Sensor Amplifier-separated Diagnosis Self-diagnosis Timer Light intensity monitor Interference prevention CHX-SC SU-7/SH Twin adjuster enables
More informationTriple Beam Adjustable Range Reflective Photoelectric Sensor Amplifier Built-in
377 PHOTO PHOTO USE MEASUREMENT STATIC CONTROL Triple Beam Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-17 Glossary of terms... P.1359~ selection
More informationColor Detection Fiber Sensor FZ-10 SERIES. Reliable and precise color discrimination. Red, green and blue LEDs. Easy set up
909 PHOTO PHOTO Color Sensor FZ SERIES Related Information General terms and conditions... F3 Glossary of terms... P.1549~ guide...p.65~ General precautions... P.155~ Recognition MEASURE panasonic.net/id/pidsx/global
More informationLED Collimated Beam Sensor LA-300 SERIES. LED collimated beam type which is as accurate as a laser sensor, but much safer.
99 PHOTO PHOTO LED Beam Sensor - SERIES Related Information General terms and conditions... P.1 Sensor selection guide...p.11~ / P.~ CA... P.79 ~ General precautions... P.7 Conforming to EMC Directive
More informationAmplifier-separated Manual Sensitivity Setting Photoelectric Sensor
-separated Manual Sensitivity Setting Photoelectric Sensor Twin Adjuster Enables Delicate Sensitivity Setting Twin Adjuster Its twin adjuster enables easy optimum setting to suit the application. Twin
More information40 mm Beam Pitch General Purpose Area Sensor NA40 SERIES
9 0 mm Beam Pitch General Purpose Area Sensor SERIES Related Information General terms and conditions... F- Glossary of terms / General precautions...p.59~ / P.55~ guide... P.9~ Korea s S-mark... P.60
More informationLED Collimated Beam Sensor LA-300 SERIES. LED collimated beam type which is as accurate as a laser sensor, but much safer.
99 PHOTO PHOTO LED Beam Sensor - SERIES Related Information General terms and conditions... P.1 Sensor selection guide...p.11~ / P.~ CA... P.79 ~ General precautions... P.7 Conforming to EMC Directive
More informationEQ-500 SERIES. Long sensing range 2.5 m ft. Series expanded to include the new 1 m ft long sensing range and DC-voltage types!
PHOTOELECTRIC SENSOR ADJUSTABLE RANGE REFLECTIVE PHOTOELECTRIC SENSOR Multi-voltage Amplifier Built-in EQ-5 SERIES Conforming to Low Voltage and EMC Directive DC-voltage type conforms to EMC directive
More informationEmitting and Receiving Element Pitch: 10mm
Small/Slim Object Detection Area Sensor Cross-beam Scanning System to Detect Slim Objects Marked Conforming to EMC Directive Letter or Visiting Card Detectable! Slim objects can be detected by using the
More information40 mm Beam Pitch General Purpose Area Sensor. Failure monitoring
OTHER SUNX PRODUCTS NA0 SERIES 0 mm Beam Pitch General Purpose Area Sensor Diagnosis Self-diagnosis Interference prevention Slim and intelligent Refer to p.9l for the light curtain. Slim body Failure monitoring
More informationE3Z-LS. Distance-settable Photoelectric Sensor. Ordering Information. Sensors. Accessories (Order Separately)
Distance-settable Photoelectric Sensor Switching between background and foreground suppression (BGS/FGS) enables detecting a variety of objects under various background/foreground conditions. Influence
More informationSUPER-SLIM PHOTOELECTRIC SENSORS. The sensor is suitable to detect small and high-speed traveling objects.
SUPER-SIM PHOTOEECTRIC SENSORS UZB1/2 series AMPIFIER BUIT-IN EXTRAORDINARIY DOWN-SIZED The Smallest Body Just mm inch Thick High-speed Response Time :.5ms Flexible Mounting Just W1H1.5Dmm W.39 H.571Dinch
More informationUS-N300. Suitable for Detecting Transparent Films or Transparent Bottles ULTRASONIC SENSOR. Reliable Detection of Transparent Objects
AUDIN Composants & systèmes d'automatisme 7 bis rue de Tinqueux - 51 Reims - France Tel. +33()3264221 Fax +33()3264282 http://www.audin.fr e-mail info@audin.fr Ultrasonic Sensor Suitable for Detecting
More informationEQ-500 ADJUSTABLE RANGE REFLECTIVE PHOTOELECTRIC SENSOR. Long sensing range 2.5 m SERIES. Not affected by background objects
EQ-5 SERIES ADJUSABLE RANGE REFLECIVE PHOOELECRIC SENSOR Multi-voltage Amplifier Built-in Long sensing range.5 m Multi-voltage EQ5 Because it can function with to V AC and to V DC, almost any power supply
More informationEX-L200 SERIES. Ultra-compact Laser Sensor. Introducing ultra-compact amplifier built-in laser sensor. Ultra-compact. Minute object detection type
7 PHOTO PHOTO IGHT FOW PARTICUAR SIMPE Ultra-compact aser EX- SERIES General terms and conditions... F- Related Information Glossary of terms / General precautions.p.59~ / P.55~ guide... P.69~ About laser
More informationpanasonic-electric-works.net/sunx A line width of approx. 240 mm in (typical) at a 1,000 mm in sensing distance
6 PHOTO PHOTO Digital Laser Sensor -separated SERIES Related Information General terms and conditions... F-7 SC-GU-C... P.9~ About laser beam... P.0~ Sensor selection guide... P.~ Glossary of terms / General
More informationSafe red LED beam. Span & shift adjustment. Light beam. Receiver. Emitter. Sensing object. Darkest condition 1.00 V 1.49 V Setting condition 2.
LA- SERIES LED Collimated Beam Sensor LA LA- HL-T1 LM1 LH-5 HL-C1 Compact size Its emitter and receiver are much smaller compared to those of the amplifier built-in type (LA-51). Hence, they can be installed
More informationCP31 SERIES. Thru-beam Mode / Retroreflective Mode with Polarizing Filter. Sensing Mode. Connection Supply Voltage Output Mode Part Number
Thru-beam Mode / Retroreflective Mode with Polarizing Filter CP SERIES Sensing Mode Connection Supply Voltage Output Mode Part Number m Cable CP-TMD-EYC CP-TMN-CYCU CP-TMP-CYCU Quick Disconnect Pico-Style)
More informationSERIES. Amplifier Built-in Adjustable Long Range & Fixed-focus Reflective Photoelectric Sensor
EQ-3 SERIES mplifier Built-in djustable ong Range & Fixed-focus Reflective Photoelectric Unaffected by Color or Material, m istance djustable Fixed-focus Marked Conforming to EMC irective Not ffected by
More informationEasy operation even for beginners! Optimum settings can be realized with simple operations
SENSORS FOR FX-0-F Digital Fiber Sensor for Leak Detection / Liquid Detection Fibers Only FX-0-F FT-F9 FD-F EX-F0/F60 HD-T M SH- FD-L M-DW * UL 600C- compatible, Passed the UL 99 Environment Test based
More informationworld smallest* Self-Contained High Precision Laser Sensor
Amplifier Built-in UTRA-COMPACT ASER SENSOR EX- SERIES FDA Unrivaled world smallest* Self-Contained High Precision aser * Based on research conducted by our company as of January 1 1. panasonic.net/id/pidsx/global
More informationLX-100 SERIES Conforming to EMC Directive
PHOTOELECTRIC SENSOR DIGITAL MARK SENSOR LX-100 SERIES Conforming to EMC Directive Introducing the ultimate mark sensor High resolution A/D converter Automatic optimal LED selection function Lead-free
More informationE3S-CR62/67. Ideal for detecting transparent glass and plastic containers. Transparent bottle sensor. Features
bottle sensor Ideal for detecting transparent glass and plastic containers Features Stable operation even if container interval is shortened for higher productivity. Stable detection of 5 mm gaps that
More informationCYLINDRICAL TYPE PHOTOELECTRIC SENSORS. Easy to Replace. The sensor with a connector (UZC---A) makes its replacement easy. Environment Resistant
CYINDRICA TYPE PHOTOEECTRIC SENSORS UZC Series SIMPE MOUNTING WITH A M8 THREAD M8 Thread This sensor has a M8 thread on an enclosure, which is convenient for mounting. Easy to Replace The sensor with a
More informationHigh Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67G environment resistance
1 High Accuracy Eddy Current Type Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1 guide... P.11~ General precautions... P.19 PHOTO PHOTO MEASURE panasonic.net/id/pidsx/global
More informationFT-KV1SERIES FD-WL48
OPTICA FIBER HEAD WAFER MAPPING FIBER Retroreflective Type FR-KV1SERIES Thru-beam Type FT-KV1SERIES UTRA-COMPACT FIXED-FOCUS REFECTIVE FIBER FD-W48 Retrorefelctive type mapping fiber with ultra-thin..87
More informationE3S-CL. Distance setting photoelectric sensor in metal housing. Features
Distance setting photoelectric sensor in metal housing High water, oil and detergent resistance Minimal black/white error for highest reliability detecting different colored objects () Features Eliminates
More informationSensing method Through-beam Retroreflective Diffuse reflective Convergent-beam Appearance Side-view Flat Side-view Flat Side-view
R Subminiature Photoelectric Sensor Omron s Next Generation of Sub-miniature Photoelectric Sensors H Utilizes Omron s Hyper LED technology to achieve the industry s smallest visible red beam H Self-contained
More informationSensing method Through-beam Retroreflective Diffuse reflective Convergent-beam Appearance Side-view Flat Side-view Flat Side-view
R Subminiature Photoelectric Sensor Omron s Next Generation of Sub-miniature Photoelectric Sensors H Utilizes Omron s Hyper LED technology to achieve the industry s smallest visible red beam H Self-contained
More informationpanasonic.net/id/pidsx/global A line width of approx. 240 mm in (typical) at a 1,000 mm in sensing distance
PHOTO PHOTO Digital Laser Sensor -separated SERIES Related Information General terms and conditions... F- SC-GU... P.97~ About laser beam... P.9~ guide... P.69~ Glossary of terms / General precautions...
More informationLA-T SERIES. Fast and reliable minute granular flaw detection in winding wires. Winding Wire Granular Flaw Detector PARTICULAR USE SENSORS
SERIES Winding Wire Granular Flaw Detector Orders accepted till September, 2003 Production to be discontinued from April, 2004 Fast and reliable minute granular flaw detection in winding wires Slim Reliable
More informationOperating mode. distance. 7 m Light ON Dark ON (selectable) 2 m [100 mm] (See note 1.) 100 mm (wide view)
Built-in Amplifier Photoelectric Sensor E3S-A/B Revolutionary High-performance High-quality Sensor with Built-in Amplifier can be adjusted in seconds because the optical axis coincides with the mounting
More informationHigh Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67g environment resistance
13 High Accuracy Eddy Current Type Sensor SERIES Related Information General terms and conditions... F- Glossary of terms... P.139 Sensor selection guide... P.9~ General precautions... P.1 PHOTO PHOTO
More informationDistance-setting Photoelectric Sensor
Distance-setting Photoelectric Sensor The Combination of the Hyper LED and Shine-proof Achieves both Ease-of-use and High Performance Hyper LED mounted. Finest pin-point beam in the industry allows detection
More informationLabel Sensor. Ordering Information. Application Example E3S-CD68/CD63. Ideal for Detecting Labels on Bottles. E3S-CD68/CD63 Label Sensor
Ideal for Detecting Labels on Bottles Satisfies the requirements of IP67. Ensures a vibration resistance of 10 Hz to 2 khz and a shock resistance of 1,000 m/s 2 (approximately 100G). Incorporates an NPN
More informationPhotoelectric Switches for Harsh Environments
Photoelectric Switches for Harsh Environments HP8 Series For even harsher environments Die-cast housing for strength and shock resistance High-performance seal Resistance to the most advanced cutting oils
More informationpanasonic-electric-works.net/sunx Supports beam axis alignment at startup and quick restoration in case of trouble
521 Compact Safety Beam Type 4 SERIES Related Information General terms and conditions... F-17 General precautions... P.1405 PHOTO PHOTO MEASURE Category 4 PLe SIL3 panasonic-electric-works.net/sunx From
More informationIndustry's standard of transparent object detection sensor
412 Stainless protector/small type series SR-Q series Industry's standard of transparent object detection sensor Stable detection even at close distances Visible red spot light KR-Q series Narrow view
More informationBuilt-in Amplifier Photoelectric Sensor
Built-in Amplifier Photoelectric Sensor Easy-to-use, Low-cost Photoelectric Sensor Incorporating s that can be clearly seen from a distance Conforms to EN and IEC standards Incorporating polarizing function,
More informationBuilt-in Amplifier Photoelectric Sensor
Built-in Amplifier Photoelectric Sensor Easy-to-use, Low-cost Photoelectric Sensor Incorporating s that can be clearly seen from a distance Conforms to EN and IEC standards Incorporating polarizing function,
More informationE3S-C. Built-in Amplifier Photoelectric Sensor. Water- and Oil-resistive Photoelectric Sensor with Metal Housing Ensuring Long Sensing Distance
Built-in Amplifier Photoelectric Sensor Water- and Oil-resistive Photoelectric Sensor with Metal Housing Ensuring Long Sensing Distance Satisfies the requirements of IP67, NEMA 6P, and IP67G (oil-tight).
More informationSensing method Appearance Sensing distance Operation mode Model. Emitter E3S-2LE4 Through-beam *1. 2 m. 0.1 to 2 m. 300 mm. 2 m
Photoelectric Sensor with Built-in Amplifier CSM DS_E 1 General-purpose Photoelectric Sensor for High Quality and Reliable Detection Be sure to read Safety Precautions on page 8. Ordering Information General-purpose
More information10 to 30 VDC (10% max. permissable ripple peak-to-peak)
R Background Suppression Sensor Photoelectric Sensor With Adjustable Setting Distance in Rugged Metal Housing H Stable detection regardless of material color or size of sensing object: 2% or less black/white
More informationUltraminiature Photoelectric Switches with Self-contained Amplifier
Ultraminiature Photoelectric Switches with Self-contained Amplifier HPJ Series Fingertip-size, Provided with a various slit attachments. (six types) Fingertip-size 22 x 11 x 8 mm (thru scan model) 30 x
More informationLong Range Metal Body Sensor
R Long Range Metal Body Sensor 30 m Range With Advanced Fuzzy Logic H Mutual interference protection H NPN/PNP switch selectable output H M12 plug-in connector H Meets IP67 and NEMA 4X, 6P H Vibration
More informationDistance-setting Photoelectric Sensor
Distance-setting Photoelectric Sensor The Combination of the Hyper LED and Shine-proof Achieves both Ease-of-use andhighperformance Hyper LED mounted. Finest pin-point beam in the industry allows detection
More informationHG-C SERIES. Micro Laser Distance Sensor. Reliable detection in 10 μm precision. We offer three types of laser sensor heads for various applications
215 PHOTO PHOTO LIGHT CURTAINS / USE Micro Laser Distance Sensor SERIES Related Information General terms and conditions... F-7 Glossary of terms / General precautions.. P.1455~ / P.1458~ Sensor selection
More informationUnrivaled. world smallest* Self-Contained High Precision Laser Sensor. * Based on research conducted by our company as of January /06/2012
Amplier Built-in UTRA-COMPACT ASER SENSOR EX- SERIES FDA Unrivaled world smallest* Self-Contained High Precision aser * Based on research conducted by our company as of January 1 1. panasonic.net/id/pidsx/global
More informationGeneral-Purpose Photoelectric Sensors with Self-Contained Amplifier
General-Purpose Photoelectric Sensors with Self-Contained Amplifier HP Series The convenience of industry standards, plus reliability. Effective light axis alignment 50% power savings Prevention of accidental
More informationA new approach to static electricity countermeasures
Advanced intelligent Sensors NEW ELECTROSTATIC SENSOR EF-SSERIES A new approach to static electricity countermeasures Measurement of surface potentials while a production line is running Phone: 8.894.42
More informationSF4-AH SERIES. Small Light Curtain Type 4. Compact size of mm in Type 4 light curtain ORDER GUIDE.
569 PHOTO PHOTO Small Curtain Type 4 SF4-AH SERIES Related Information General terms and conditions... P.1 SF-AC... P.588 Glossary of terms... P.983 ~ General precautions... P.986 ~ Conforming to Machine
More informationConnections Appearance Sensing method Sensing distance Operating mode Model Plug-in connector Horizontal Through-beam 30 m Light-ON
Heavy-duty Plug-in Photoelectric Sensor Water-resistive Photoelectric Sensor with Metal Housing & Plug-in Connector Ensuring Long Sensing Distance Satisfies the requirements of IP67, and NEMA6P. Ensures
More informationGeneral-Purpose Photoelectric Sensor
General-Purpose Photoelectric Sensor Wide Selection of High Performance Small DC Sensors Offers Longer Sensing Distances Fast 0. msec response time for high-speed sensing Extended sensing distances up
More informationZ4D-F. LED-type Micro Displacement Sensor with Many Features in a Compact Body. Micro Displacement Sensor. Ordering Information.
/ Length Micro Sensor LED-type Micro Sensor with Many Features in a Compact Body Compact body only /4th the volume of our previous product. % cost reduction over our previous product. High performance
More information12 V DC ±10 % 150 ma max. 130 ma max. 120 ma max.
96 PHOTO PHOTO ON/OFF Input SERI Related Information General terms and conditions... F-3 General precautions... P.9 MEASURE panasonic.net/id/pidsx/global Multi-functional D rail mounting slim sensor controller
More informationSelf-contained Photoelectric Sensors PZ2 Series
Self-contained PZ Series Features World s smallest photoelectric sensors Excellent mirror surface detection IP-7 rated waterproof can operate side by side Detecting Distance Thrubeam 7, Retro-reflective
More informationE3Z. 30 m. 20 cm. 4 m. 1 m. Compact Photoelectric Sensor with Built-in Amplifier
Compact Photoelectric Sensor with Built-in Amplifier EZ CSM_EZ_DS_E The Standard for Photoelectric Sensors with a Secure Track Record of One Million Sold early. Long sensing distance of m for Through-beam
More informationIncorporated with red marker. Suitable for high speed production line
PARTICUAR USE SENSORS SERIES Hot Melt Glue Detector Quick, reliable and non-contact detection of hot melt glue EZ- Miniature sensor head Spot type The sensor head can be mounted in a congested and tight
More informationLong Range Metal Body Sensor
R Long Range Metal Body Sensor 30 m Range With Advanced Fuzzy Logic H Mutual interference protection H NPN/PNP switch selectable output H M12 plug-in connector H Meets IP67 and NEMA 4X, 6P H Vibration
More informationAnalog output type for diverse applications
FIBER SENSORS Slim Body Analog Sensor Interference prevention Analog output type for diverse applications FZ-1 FX-311 FX-CH FX-33 Color Detection Analog Output Manually Set Bank Unit FX-3 FX-31 Analog
More informationE3X-NL. Employs OMRON's Unique Free Angle Optics Technology for Detecting Minute Differences in Glossiness. Optical Fiber Glossy Object Sensor
Authorised Distributors:- AS & AAIN INDIA PVT TD S-1, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-112(India) Tel : 11-43797575 Fax : 11-43797574 E-mail : sales@ashalain.com Fiber Glossy Object
More informationonlinecomponents.com
Photoelectric Sensor with Built-in Amplifier (Ultracompact and Thin Type) ET Photoelectric Sensor with Built-in Amplifier Contributes to Equipment Downsizing CSM_ET_DS_E Ultracompact and Thin Photoelectric
More informationSensing method Appearance Sensing distance Operation mode Model Convergent-reflective (narrow vision field) 30 to 100 mm (variable)
Photoelectric Sensor with Built-in Amplifier CSM DS_E_11_1 General-purpose Photoelectric Sensor for High Quality and Reliable Detection Be sure to read Safety Precautions on page 8. Note: -2/-/-DS10/-DS30/-R2
More informationEE-SX770/771/772/870/871/872(A/P/R)
EE-SX770/771/772/870/871/872(A/P/R) Thin, Compact Photomicrosensor with Attached Cable H Next generation design available with NPN or output H Allows standard M3-screw mounting H Twenty-four models available
More informationHPA Series. Self-contained Photoelectric Controls with High Functions. Specifications CLICK FEATURES ORDER GUIDE. Pre-leaded type (2m lead)
6 HPA Series Specifications Self-contained Photoelectric Controls with Functions FEATURES Strobe Light Emission, Margin Regulation, Front Incoming Light Display, and Output Inhibit Functions Allow Sensing
More informationNew industry standard sensor
48 Low cost/mall type series New industry standard sensor Longest sensing distance in class at 2 m * ignificantly reduced dead zone Indicators visible from any angle *Red LD type, with through-beam type
More informationPhotoelectric Sensor
Photoelectric Sensor Revolutionary High-performance High-quality Sensor with Built-in Amp can be adjusted in seconds because the optical axis coincides with the mounting axis. Highly visible spot on white
More information