INTERIOR DESIGN INTENT DRAWINGS - condensed version
|
|
- Eustace Strickland
- 5 years ago
- Views:
Transcription
1 INTERIOR DESIGN INTENT DRAWINGS - condensed version COMMENTS ADDED N
2 N-1a NOTICE HOLDER N-1b NOTICE HOLDER N-1c NOTICE HOLDER N-1d NOTICE HOLDER N-1e NOTICE HOLDER 6" 1'-5" 1'-5" APCO FullView FVS0806(H) sign. Printed insert sits behind matte acrylic lens. Insert should fit tight against acrylic window for optimal APCO FullView FVS8511(H) sign. Printed insert sits behind matte acrylic lens. Insert should fit tight against acrylic window for optimal N-1g NOTICE HOLDER FVCTS Single-Sided APCO FullView FVS1117(H) sign. Printed insert sits behind matte acrylic lens. Insert should fit tight against acrylic window for optimal APCO FullView FVS1185(H) sign. Printed insert sits behind matte acrylic lens. Insert should fit tight against acrylic window for optimal APCO FullView FVS1711(H) sign. Printed insert sits behind matte acrylic lens. Insert should fit tight against acrylic window for optimal APCO FullView FVS8511(H) sign. Printed insert sits behind matte acrylic lens. Insert should fit tight against acrylic window for optimal N-1f NOTICE HOLDER COUNTER TOP MODULE: APCO FullView FVS1185(H) sign. Printed insert sits behind matte acrylic lens. Insert should fit tight against acrylic window for optimal NOTE: this insert holder does not allow easy changing by client. If that is needed, Center Pointe Signs has a "pocket" sign that matches these and allows for easy insert removal FS301 Vertical Single-sided N-1a,b,c,d,e,f,g NOTICE HOLDERS N1
3 1/4" (th.) clear acrylic backer panel. 1/4" (th.) black wall spacer made from inexpensive recycled or recyclable material (Komacel or Sintra) to float sign off the wall. Inset from all sign edges 3/. 1/ (th.) non-glare acrylic lens. Attached to backer panel with VHB tape, leaving left edge open to allow insertion of printed insert. 3/ 9" 3/ 3/ Non-glare acrylic lens has a sub-surface painted border on the acrylic lens to match Light Silver. Border to conceal insert edges and VHB tape. Leave slot between acrylic lens and backer panel to allow insertion of printed insert. Insert to be tightly sandwiched between acrylic backer and non-glare acrylic lens no rippling. Attach to wall with VHB tape and liquid adhesive as required. 11 Insert Layout TBD Provide thumb slot on backer behind acrylic lens for easy insert removal. x laminated printed sign insert to be minimally printed at 1200 DPI using pigment-based UV inks on a white, satin finish photo paper, with a matte UV over-laminate. The thickness of the insert must be heavy enough so that no wrinkles or waves will occur once installed into the sign. All edges eased so there are no sharp corners or edges. Layouts can be customized depending on needs of the facility. Inserts can be pre-printed or customized using a simple word processing template. If a template is created it should use the system fonts in the Myriad Pro family whenever possible. If necessary a sans serif typeface like Arial can be used so that it looks compatible with the system. White paper can be used but avoid using colors that do not match the system. Side View Front View N-1d-alt NOTICE HOLDER, LETTER PORTRAIT, ACRYLIC Scale: 3 =1-0 on an 11 x 17 sheet N2
4 O R EGO N H E A L TH & S C I E N C E S U N I V E R S I T Y - I N T E R I O R W A Y F I N D ING S I G N A G E P A C K A G E SIGN FRAME: APCO FullView FVS8511(H) sign. Custom-printed x insert sits behind matte acrylic lens. 9" SIGN BACKER: 1/4" (th.) sign backer to extend below sign frame. Paint to match Silver. BROCHURE HOLDERS: Mount two brochure holders to sign backer below sign frame. Suggested brochure holder: Slim Pocket Brochure Holder - for Wall Mounted 3-3/4 wide Trifold Literature - See more at: 10" N-1h NOTICE HOLDER W/BROCHURE HOLDERS Scale: 3 =1-0 on an 11 x 17 sheet N3
5 1/4" 1/4" Please lock the door. No cell phones in this area. Cell phones may interfere with patient care equipment. Accessible Path to Hospital Take Elevator to Lobby to access Doernbecher Children s Hospital. SIGN PLAQUE: 1/4 Acrylic panel with sub-surface paint and vinyl graphics. SIGN PLAQUE: 1/4 Acrylic panel with sub-surface paint and vinyl graphics. 3 3/4" No cell phones in this area. 1 1/ Cell phones may interfere with patient care equipment. 5/ N-2 GENERAL INFORMATION N-2a GENERAL INFORMATION N4
6 3/ 4" All are welcome to use the restroom that aligns with their gender identity or expression. N-3 SIGN PANEL: 3/8 thick painted acrylic panel with digitally printed messaging to match white. WOMEN 2478 R-1 All are welcome to use the restroom that aligns with their gender identity or expression. N-3 GENERAL INFORMATION N5
INTERIOR DESIGN INTENT DRAWINGS - condensed version
INTERIOR DESIGN INTENT DRAWINGS - condensed version 8.10.2018 COMMENTS ADDED 11-11-16 D ~6" 1'-3 5" 2 1/2" 1/2" 5'-2" 6 5/8" 1/2" 3 1/2" Custom fabricated, double-sided cabinet with painted custom radius
More informationWAYFINDING TEAM For client review. St. Cloud State University
St. Cloud, Minnesota 04.28.25 For client review INTERIOR DESIGN INTENT DOCUMENT WAYFINDING TEAM 720 4th Ave. South 563 John Frischmann Director of Facility Management jmfreschmann@stcloudstate.edu Loren
More informationSECTION NON-ILLUMINATED INTERIOR DISPLAY SYSTEM
SECTION 10445 NON-ILLUMINATED INTERIOR DISPLAY SYSTEM FullView Display System includes concealed pin lock device to secure a clear cover and/or sign insert material into the frame. Vandal resistant. PART
More information50948-RHN Putney. 14 Dec This document includes: N14 General internal signage systems. Code Section Revision Dated
50948-RHN Putney 14 December 2017 This document includes: Code Section Revision Dated N14 General internal signage systems 1 Table of Contents Title N14 General internal signage systems Page 3 N14 General
More informationProduct Catalogue. Casements / Holders Plaques Photoluminescent Mounting Materials Custom Graphics Printing. EvacGlow.com
Product Catalogue Casements / Holders Plaques Photoluminescent Mounting Materials Custom Graphics Printing EvacGlow.com Introduction Building evacuation plans, fire evacuation maps and emergency exit signs
More informationBUS RAPID TRANSIT FOURTH PLAIN BLVD
K SIGN TYPE C BAY ID INTERNALLY ILLUMINATED, DOUBLED-SIDED SIGN CABINET MOUNT TO LIGHT POLE BY OTHERS AT DRIVER STOP LINE. ALUMINUM CABINET, DIGITALLY PRINTED GRAPHIC MOUNTED TO POLYCARBONATE LENS. 22'
More informationArchitectural Aluminum Frames
Specialty requirements for room identification and control are accomplished with these unique frames. They feature built-in changeable messages, magnetic changeable signs and frames with dividers. Frames
More informationPHOTOPOLYMER BRAILLE RASTER BRAILLE MOLDED BRAILLE QUICK SHIP ADA BRAILLE SIGNS. Photopolymer sign panel in a variety of thicknesses.
ADA BRAILLE SIGNS PHOTOPOLYMER BRAILLE Photopolymer sign panel in a variety of thicknesses. 1/32" raised text, graphics and Braille. Standard sizes with radius or square corners. Acrylic polyurethane finish.
More informationINTERIOR SIGNAGE MANUAL
INTERIOR SIGNAGE MANUAL ➊ Purpose ➋ Procedures ➌ ADA Requirements INTERIOR SIGNAGE MANUAL ➍ Text, Braille, Pictograms and Color ➎ Families of Interior Signage ➏ Mounting Guidelines ➐ Signage Diagrams ➑
More informationSECTION SIGNAGE
SECTION 10 14 00 SIGNAGE PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division-1 specification section, apply
More informationSECTION INTERIOR SIGNAGE
SECTION 10 14 02 INTERIOR SIGNAGE PART 1 GENERAL 1.1 REFERENCES The publications listed below form a part of this specification to the extent referenced. The publications are referred to in the text by
More informationSECTION IDENTIFICATION SIGNS. A. Plastic Signs, raised character, tactile, room identification, exit door signs, and non-tactile signs.
SECTION 10 14 00 IDENTIFICATION SIGNS PART 1 - GENERAL 1.01 SECTION INCLUDES A. Plastic Signs, raised character, tactile, room identification, exit door signs, and non-tactile signs. 1.02 REFERENCES A.
More informationBUILDING SIGN PROGRAM JULY 2012
BUILDING SIGN PROGRAM JULY 2012 TABLE OF CONTENTS Introduction... 2 General Information for all Signs... 3 Sign Selection Considerations... 4 Typography... 5 Color Schedule... 6 Glossary... 7 Interior
More informationDrawings of all parts have been included for ease of part identification.
Acme Corporation Instructions for Assembly of the HO Scale Acme Corporation HO Kit Contents: 156 ea. white 1/16" laser cut acrylic part 10 ea. white 1/8" laser cut acrylic part 37 ea. adhesive-backed brick
More informationPrint & Frame Products. August 2011
Print & Frame Products August 2011 Phooto.co.uk 5 Collingwood Farnborough Hampshire GU14 6LX t: 01252 377099 m: 07799 890210 e: simon@phooto.co.uk Acrylic Wall Mount An alternative for the modern environment
More informationSign Construction and Implementation Principles
Sign Construction and Implementation Principles Revision 3.1 Curtin University Cover page 001 S 2.1 Primary identification Page 004-005 S 4.1 Tertiary identification Page 014-016 Wall Mounted Super-numerals
More informationKNIGHT CANCER INSTITUTE KNIGHT CANCER INSTITUTE
1 1/4" 1'-2" INDIVIDUAL LETTERS: Colite LP4 Face Lit Letters (or equal) with silver metallic translucent vinyl over white acrylic faces and painted opaque returns. Sign appears silver metallic during the
More informationSECTION IDENTIFYING DEVICES
PART 1 GENERAL 1.1 RELATED DOCUMENTS SECTION 10441 IDENTIFYING DEVICES A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division-1 specification section,
More informationlb. Coated Inkjet Bond
746 36 lb. Coated Inkjet Bond 746 is a high-quality base paper with a waterresistant inkjet coating to produce a strong, smooth printing surface ideally suited for many types of high-volume CAD and graphic
More informationThe School District of Palm Beach County Project Name SDPBC Project No. SECTION ( ) SIGNAGE PART 1 GENERAL 1.1 RELATED DOCUMENTS
PART 1 GENERAL 1.1 RELATED DOCUMENTS SECTION 10441 (10 14 00) SIGNAGE A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division-1 specification section,
More informationSETUP INSTRUCTIONS If you would like to tell us about your experience with your setup instructions please us at
207 VK-964 General Layout 0 0 Plan View www.classicexhibits.com SETUP INSTRUCTIONS If you would like to tell us about your experience with your setup instructions please email us at info@classicexhibits.com
More information1.1. Any deviance from the following requirements must be approved during design by WVU Facilities Management.
WVU DESIGN GUIDELINES & CONSTRUCTION STANDARDS DIVISION 10 SPECIALTIES SECTION 101410 INTERIOR SIGNAGE PART 1 - GENERAL 1.1. Any deviance from the following requirements must be approved during design
More informationBackpainted Glass Technical Manual
Backpainted Glass Technical Manual v.05.16 Table of Contents Element Designs manufactures custom backpainted glass for both commercial and residential applications. Custom backpainted glass is available
More information#800 Overall " x 8 7 8" Imprint area " x 3 1 8" #809 - Custom OFFSET FULL COLOR ITEM #
MADE IN USA FREE ART FREE LOGOS FREE BLEEDS NO CHARGE FOR OVERRUNS GUARANTEED INVENTORY TEAR RESISTANT TAGS 313-756-4500 #800 Overall - 2 1 8" x 8 7 8" area - 17 8" x 3 1 8" #802 3" x 6" #801 2 ¾ " x 5
More informationAmericans with Disabilities Act (ADA) Federal Guidelines
Americans with Disabilities Act (ADA) Federal Guidelines The information provided here is distilled from the 2010 ADAAG Final Rule and the ANSI A117.1-2010 Standards and shall be applied to all building
More informationThis page is intentionally left blank.
Freestanding Stanchion Sign Freestanding Informational Signs Infection Control Sign Card or Paper Holder Chart, File, or Binder Holder Door Knob Hanger Frangible Room Number Sign Secure Facility Sign Reality
More informationCity of Topeka, Kansas Wayfinding Program. Revised Design Intent - REISSUED. October 10, 2018
City of Topeka, Kansas Wayfinding Program Revised Design Intent - REISSUED October 0, 08 Lake Wellington Professional Centre Studio Suite 0-Y 6 Ken Adams Way Wellington, FL 56.8.605 axiacreative.com CONTENTS
More informationSLATWALL AND SLATWALL EQ. Reliable, Affordable Merchandising
SLATWALL AND SLATWALL EQ Reliable, Affordable Merchandising Secondary Spaces Markets Served Retail Stores Healthcare Facilities Schools & Universities Restaurants Hotels & Casinos Houses of Worship Transportation
More informationHealthcare Portfolio
Healthcare Portfolio Signage in your Scope? Let us help. This streamlined signage selection process saves you money, time, and energy by offering complete pre-designed ADA compliant interior sign families.
More informationA Guide to Using the Generic Flyer Template
A Guide to Using the Generic Flyer Template The purpose of this document is to demonstrate the creative uses of the Generic Flyer Template as well as providing a style guide for the successful application
More informationSNAP Signs Design Tips and Instructions
SNAP Signs Design Tips and Instructions Removing the Shield Page of 5 Press the suction cup onto the center of the shield. Briskly pull the shield straight out of the frame. Installing the Shield Press
More informationBUILDING SIGN PROGRAM SEPTEMBER 2016
BUILDING SIGN PROGRAM SEPTEMBER 2016 TABLE OF CONTENTS INTRODUCTION...2 GENERAL INFORMATION FOR ALL SIGNS...3 SIGN SELECTION CONSIDERATIONS...4 TYPOGRAPHY...5 COLOR SCHEDULE...6 GLOSSARY...7 INTERIOR SIGNS
More informationYour colours, your wall, your life... Photography Services
Your colours, your wall, your life... Photography Services Your colors, your wall, your life... Deco Manufacturing Ltd. is an explosion of colours and ideas that seeks to give life to your home. Every
More informationMaking Thermal Ink Jet Graphics 3M Scotchcal Opaque Imaging Media 8522CP 3M Scotchcal Instant Dry Translucent Imaging Media 8544CP
Instruction Bulletin 4.23 Release D-EU, Effective February, 2001 Making Thermal Ink Jet Graphics 3M Scotchcal Opaque Imaging Media 8522CP 3M Scotchcal Instant Dry Translucent Imaging Media Compatible Products
More informationSECTION INTERIOR SIGNAGE
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 10 14 05 SPEC WRITER NOTES: 1. Use this section only for NCA projects. 2. Delete //-----//if not applicable to project. Also delete any other item or paragraph
More informationSTAND OUT! Offset, Digital and Large Format Solutions. Standard Modern is a full service printing, mailing and fulfillment company.
STAND OUT! Offset, Digital and Large Format Solutions Standard Modern is a full service printing, mailing and fulfillment company. www.standardmodern.com Communicate your message Indoor? Outdoor? For today?
More informationMRI Safety. Stickers. MRI Safe - Do Not Remove From MRI Area - Warning Stickers. Available in Red or Green
Stickers MRI Safe - Do Not Remove From MRI Area - Warning Stickers Die Cut Permanent Adhesive Laminated 6 3 4 1 1/2 1 Available in Red or Green MT-1065 Red - 5 Large, 5 Medium, 5 Small $19.95 pk. MT-1092
More informationSummary of Modifications/Changes in this Update
Summary of Modifications/Changes in this Update This Summary of Changes is for information only. It is not a part of the referenced document, and should not be used for project documentation. U.S. Department
More informationSystem / SignMatch. The Original Modular System and Winner of the Design of the Decade Award by the Industrial Designers Society of America 4.5.
System / SignMatch 4.5.100 The Original Modular System and Winner of the Design of the Decade Award by the Industrial Designers Society of America 4.5.101 Description IM System The IM Sign Module is precision
More informationArchitectural Excellence
Architectural Excellence 0 River Road Verona, PA 47 Tel: 4.80.00 Fax: 4.80.4404 www.buntinggraphics.com Sign Programs for Libraries Company Background Bunting Graphics is a high quality architectural fabricator
More informationInstallation Instructions
Installation Instructions Follow these simple instructions to install your OneDayCab! IMPORTANT: Unpack and check shipment for damage. Verify color, size and parts before demolition. Installation of interiors
More informationCity of Los Angeles Department of Building & Safety Disabled Access Section Supplemental Plan Review Checklist No. 2
City of Los Angeles Plan Check No. 1. Except building directories, menus, seat and row designations in assembly areas, occupant names, building addresses, and company names and logos, new or altered signs
More informationTCC/SHORE TRANSIT BUS MAINTENANCE FACILITY - PHASE II
SECTION 101400 - SIGNAGE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and supplementary Conditions and Division-1 Specification Sections,
More informationInstructions for Assembly of the HO Scale The Charles
The Charles Instructions for Assembly of the HO Scale The Charles HO Kit Contents: 337 ea. white 1/16" laser cut acrylic part 19 ea. Clear 1/16" laser cut acrylic part 69 ea. white 1/8" laser cut acrylic
More informationIllustration 2 Illustration 3
6-Arm Pinwheel The 6-Arm Pinwheel Design tool is not nested The four sizes are made from ⅛ clear acrylic (pictured on left in Illustration 1). The Small 6-Arm Pinwheel Machine Quilting tool (pictured on
More informationFolders and Holders Guide
design l photography l print Folders and Holders Guide A guide to Richprint s most popular sized and shaped folders and holders. www.richprintonline.co.uk Folders and holders... an excellent way of improving
More informationWIDE FORMAT PREMIUM WHITE COATED ONE SIDE INKJET BOND
LASER BOND AND CAD INKJET MEDIA----------------------------------------------------------------------12-1 CAD INKJET BOND FOR SPOT COLOR APPLICATIONS-----------------------------------------------12-1
More informationWIDE FORMAT PREMIUM WHITE COATED ONE SIDE INKJET BOND
LASER BOND AND CAD INKJET MEDIA----------------------------------------------------------------------12-1 CAD INKJET BOND FOR SPOT COLOR APPLICATIONS-----------------------------------------------12-1
More informationHybrid Pro Counter 10
Hybrid Pro Counter 10 REC-53 All Hybrid Pro TM Modular counters feature accessible storage and locking doors. Purchased printed fabric graphics or rigid infill panels allow for your messaging and branding.
More informationREMEDIAL CLASS PRESENTATION SKILLS
REMEDIAL CLASS PRESENTATION SKILLS REMEDIAL CLASS PRESENTATION BOARD LAYOUT TIPS Before you start Organize yourself. What is your purpose or what main idea do you want your presentation to communicate?
More informationLICENSE PLATES AUTO CARDS
LICENSE PLATES AUTO CARDS Durable Plastic Advertising that Moves! 6" x 12" with 3/16" x 1" slots or 3/8" diameter holes. Slots furnished unless holes specified. #488 -.023" white polyethylene #481-24 pt.
More informationATTACHMENT B1. Typical Facility Signage Standards and Guidelines/Sign Types
7006786 TTCHMENT B1 Typical Facility Signage Standards and Guidelines/Sign Types 3.0 3.0 S - TERMINLS/GTE RES - 3.1 Sign Type Index - 3.2 Sign Types INDEX - TERMINLS/GTE RES This chapter provides specific
More informationPackaging Box Artwork Specification
Artwork Dimension & Specification Printing Artwork Preparation. Artwork CANNOT be printed on the gluing area (e.g. Glue flap and Auto Bottom Lock box structure with gluing area). This is to ensure the
More informationPanels, Panel Mounting & Other Accessories
Panels, Panel Mounting & Other Accessories Wire mesh guarding on assembly conveyor line Machine safety enclosure using Lexan panels 108 Multiblock Al 1-105 1-3 Various fastening options for panels on Multiblock
More informationLinear Pro Kit 22. features and benefits: dimensions: additional information:
Linear Pro Kit 22 LN-K-3P-22 Linear Pro Kits provide a modern, slick and stylish appearance. The extrusion based exhibits feature a Velcro-applied fabric center graphic, UV printed or frosted plex headers
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS BUILDERS CHOICE FRAMED Shower Height Swing Door Model: L533 Rev. 09.03.13 MAINTENANCE: Two primary materials are used to manufacture your new Aquatic enclosure; tempered glass
More informationFraming Fine Art Photography
Framing Fine Art Photography Gallery Style 99% of our customers are photographers and the bulk of our sales are for galleries, art shows, and general retail of photo prints. For this reason we specialize
More informationMaking a Custom Symbol. Making a Custom Symbol in Chief Architect
TIP in Chief Architect INTRODUCTION Being able to make your own symbols in Chief Architect can be very useful. Not many users take the time to learn how to do this because they believe it to be a difficult
More informationMohawk Sign 2010 ARCHITECTURAL GRAPHICS CATALOG. A Sign of Quality Since 1946
10 14 00/MOH BuyLine 0645 2010 ARCHITECTURAL GRAPHICS CATALOG ADA Compliant LEED credit eligible Environmentally Friendly High Quality Durable Reliable Personalized Service Custom Designs Mohawk Sign S
More informationInstallation Instructions
by Precision Screen & Security s 27040 San Bernardino Ave, Redlands, CA 92374 www.precision-screens.com TM Installation Instructions NOTE: Prior to Permanently mounting the BacTrac, insure the handle and
More informationBe On POINT! Offset, Digital and Large Format Solutions. Reynolds DeWalt is a full service printing, mailing and fulfillment company.
Be On POINT! Offset, Digital and Large Format Solutions Reynolds DeWalt is a full service printing, mailing and fulfillment company. www.reynoldsdewalt.com Indoor? Outdoor? For today? For the future? State-of-the-art
More informationDEPARTMENT DRAWING STANDARDS
DEPARTMENT DRAWING STANDARDS Department of Architecture College of Communication + Fine Arts The University of Memphis Effective Fall 2010; Updated Summer 2013 (subject to revision) Unless otherwise stated
More informationAPPENDIX 6. SIGNAGE TYPES: Signage as manufactured by KROY Sign Systems, N. Hayden Road, Scottsdale AZ 85260
SIGNAGE TYPES: Signage as manufactured by KROY Sign Systems, 14555 N. Hayden Road, Scottsdale AZ 85260 STANDARD for all signs: Arch Gray color Plate & Border. University Logo (for sign types B & C). Helvetica
More informationA. Submit manufacturer's technical data and installation for each type of sign required.
SECTION 10425 PART ONE GENERAL 1.1 SECTION INCLUDES A. Interior Building Signage. B. Handicapped parking signs. C. Permanent Project Sign. 1.2 DESCRIPTION A. Signage shall consist of room number and room
More informationMRI Safety Books, DVD s and MRI Training
MRI Safety Books, DVD s and MRI Training 2018 Reference Manual for Magnetic Resonance Safety, Implants, and Devices The Reference Manual for Magnetic Resonance Safety, Implants, and Devices: 2018 Edition
More informationCHABOT-LAS POSITAS COMMUNITY COLLEGE DISTRICT CHABOT COLLEGE CAMPUS MASTER SIGN PROGRAM, PHASE 2 BID NO
CHABOT-LAS POSITAS COMMUNITY COLLEGE DISTRICT CHABOT COLLEGE CAMPUS MASTER SIGN PROGRAM, PHASE 2 BID NO. 18-04 ADDENDUM NO. ONE DATE: September 07, 27 CLIENT / PROJECT: Chabot-Las Positas CCD Campus Master
More informationSIMPLE BLOCK DESIGN. Check out Quilter s Rule complete line by visiting: Quilter s Rule
4-Arm Pinwheel The 4-arm Pinwheel Design tool is partially nested and made from ⅛ clear acrylic (pictured on left in Illustration 1). The Mini 4-Arm Pinwheel Machine Quilting tool (pictured on right in
More informationTypography guidelines
University of Alberta Sign Systems Guidelines Typopgraphy guidelines Typography guidelines Introduction Consistency and legibility are key components of an effective system. This section defines: type
More informationArchitectural Signage Division of Saxton Industrial Inc. SaxtonBronze.com
Architectural Signage Division of Saxton Industrial Inc. Consultation Design SaxtonBronze.com 2019 Fabrication 1736 Standard Ave. Glendale, CA 91201 Order@SaxtonBronze.com Call Us: (818) 265-0069 www.saxtonbronze.com
More informationLinear Pro Kit 27. features and benefits: dimensions: additional information:
Linear Pro Kit 27 LN-K-3P-27 Linear Pro Kits provide a modern, slick and stylish appearance. The extrusion based exhibits feature a Velcro-applied fabric center graphic, UV printed or frosted plex headers
More informationAxminster Single Hinge Jig
Code 100714 Axminster Single Hinge Jig (Clamp not supplied) Index of Contents Page Index of Contents 2 Copyright 2 Introduction 3 What s in the Box 3 General Instructions for Working Practice/Safety 3
More informationYOUR PROJECT : CLIENT REQUEST : AMBIENCE : SCANDINAVIAN DECORATOR REPLY :
YOUR PROJECT : CLIENT REQUEST : Hello, We need to re-think the interior of our Sitting Room to create a whole new atmosphere: modern, warm and welcoming. We love indirect lighting and would consider carpet
More informationis ~10 mil and we offer both gloss and matte.
Vol. 16, No. 8 Color Posters and Finishing January 2011 Throughout this document, you will find many options for banner stands that Printing & Copy Services now offer. A spreadsheet with all stand options
More informationWALL SHELVING SYSTEM 250/750
468 2/7 Installation Example Ceiling Height (CH) : 2800 mm Ceiling Height (CH) : 28 mm Corner Installation 2 design panels are used to cover mm space in case of ceiling height 28 mm. Corner Example 469
More informationThe Rubley Building Instructions for Assembly of the N scale kit. v1.1
The Rubley Building Instructions for Assembly of the N scale kit. v1.1 Kit Contents: 197 ea. laser cut 1/16" acrylic parts. 1ea. adhesive backed.020 styrene part. 10 ea..060 x 1" styrene alignment pins.
More informationPage 2 - Printy Line - Text Stamps Replacement Pads (See Catalog for Machine/Pad)
Page 2 - Printy Line - Text Stamps 4910 - $18.60 4918 - $31.70 6/4910 - $9.20 6/4918 - $9.20 4911 - $20.70 4921 - $20.70 6/4911 - $9.20 6/4921 - $9.20 4912 - $23.90 4922 - $24.90 6/4912 - $9.20 6/4922
More informationQUALITY SCREENPRINTED PRODUCTS SINCE 1949 CUSTOM PRINTING. Signs Decals Nameplates Vehicle Decals and Magnetics
QUALITY SCREENPRINTED PRODUCTS SINCE 1949 CUSTOM PRINTING Signs Decals Nameplates Vehicle Decals and Magnetics 530 East Jamie Avenue La Habra, Ca 90631 Customer Service Order Desk (800) 903-3385 Fax (800)
More informationFrameless Inline Door With Return QCI5263
INSTALLATION INSTRUCTIONS Frameless Inline Door With Return QCI5263 WALL MOUNT HINGES FRAMELESS DOOR / PANEL / RETURN PANEL QCI5263 REV. 0 Page 1 Certified 06/17/2016 Parts List with wall mount hinges
More informationA D A T E C H N I C A L G U I D E A D A F L O O R P L A N S TA N D A R D C O L O R S S I G N D R A W I N G S - S P E C S. + Quick Turnaround
+ Quick Turnaround + Same Day Estimates + Free ADA Compliance Review A D A T E C H N I C A L G U I D E A D A F L O O R P L A N + + Standard and Custom ADA Signs Unlimited Design Options S TA N D A R D
More informationOur Company was established in January 2000 based in Mumbai, India, with a dynamic combination of
Our Company was established in January 2000 based in Mumbai, India, with a dynamic combination of Resource, Technology & Vision. With a mission to bring International Quality signage into the Retail Market,
More informationWe do it your Wayfinding
I n n o v a t i v e s i g n s o l u t i o n s f o r t h e h o t e l s i n d u s t r y We do it your Wayfinding Outdoor signs Outdoor directory Type: Post & Panel sign Overall sign size: H 2002mm X W 1071mm
More informationSECTION FASCIA INTERIOR FRAMED SIGNS & DIRECTORIES
Corporate Office: ASI Signage Innovations. 8181 Jetstar Drive Dallas, Texas 76053 (214) 352-9140 voice (214) 352-9741 facsimile (800) 274-7732 www.asisignage.com marketing@asisignage.com GUIDE SPECIFICATION
More informationDonaldson s Department Store
Donaldson s Department Store Instructions for Assembly of Donaldson s Department Store Kit Contents: 80 each laser cut acrylic parts. 1 each sheet of canopy parts. 1 each sheet of AC roof unit parts. 1
More informationASI: PPAI: UPIC: GILL. New Products!
ASI: 56950 PPAI: 114157 UPIC: GILL New Products! Offers good thru Oct. 31, 2016 STOCK SHAPE & SIZE DECALS Outdoor Durable 3-5 Years Popular Shapes & Sizes! Vibrant, Beautiful Screen Printing! *Shading designates
More informationThe Park Hotel Instructions for Assembly of N Scale Kit
The Park Hotel Instructions for Assembly of N Scale Kit Kit Contents: 198 ea. Laser Cut Acrylic Parts, 2 ea. Chimney Parts Sheets, 1 ea.2".040 styrene rod, 5 ea. Sidewalk Parts, 14 ea. Cast Resin Dormers,
More information1/4 FRAMELESS SLIDING DOOR FOR TUB OR SHOWER
1/4 FRAMELESS SLIDING DOOR FOR OR SHOWER INSTALLATION INSTRUCTIONS NEED INSTALLATION HELP? Call 1-800-45-BASCO (452-2726) M onda y - Friday 8 :00 A.M. - 4:30 P.M. Eastern Time MAINTENANCE: Two primary
More informationChapter 11. Siding and Soffit
Chapter 11. Siding and Soffit 11.1 SIDING PREP 11.2 INSTALLING HOUSE SIDING 11.3 INSTALLING SHED SIDING 11.4 INSTALLING SOFFIT 11.5 INSTALLING FASCIA 11.6 INSTALLING SHUTTERS 11.7 SITE CLEANUP Tools needed
More informationSPACER APPLICATION: KEY POİNTS FOR HİGH QUALİTY İG UNİTS
SPACER APPLICATION: KEY POİNTS FOR HİGH QUALİTY İG UNİTS Application of spacer should be in clean and indoor area. Glass washing machine, hot press machine and spacer application table should be in the
More informationPULLOUT SHELF ROCKLER BUILD IT WITH BUILD CUSTOMIZE
BUILD Stock Item 12229 Drawer s, 2 1 2" x 48" 63420 Baltic Birch Ply, 1/4" x 24" x 30" 38742 Maple, 3/4" x 3" x 24" 45953 100# Zinc Over-Travel Drawer Slides - Centerline 757-20" 30254 #8 x 1 1 4" Square
More informationAmericans with Disabilities Act and Architectural Barriers Act Accessibility Guidelines
Americans with Disabilities Act and Architectural Barriers Act Accessibility Guidelines July 23, 2004 U N I T E D S T A T E S A C C E S S B O A R D A FEDERAL AGENCY COMMITTED TO ACCESSIBLE DESIGN TECHNICAL
More informationTOYOTA MOTOR EUROPE CA Products Division Tel : Fax :
TOYOTA MOTOR EUROPE CA Products Division Tel : + 32 2 745 26 77 Fax : + 33 2 745 26 99 Ordering part numbers Comments Part Numbers Wooden floor one hatch PZ449-D3C42-11 one hatch with carpet PZ449-D3C42-01
More informationUSER GUIDE & SERVICE MANUAL
& SERVICE MANUAL RIGHT PRODUCT. RIGHT PLACE. RIGHT TEMPERATURE. SINCE 1962. Modular 3000 Series 3024BEV 24" Beverage Center Contents Intro Installation Integrated Panel Dimensions Integrated Grille / Plinth
More informationINSTALLATION INSTRUCTIONS. UNIT No. 160/760 THIN-LINE SHOWER ENCLOSURE
INSTALLATION INSTRUCTIONS UNIT No. 160/760 THIN-LINE SHOWER ENCLOSURE QCI0011 Rev. 0 Page 1of 10 Certified 10/18/2006 MAINTENANCE: Two primary materials are used to manufacture your new Basco enclosure;
More informationafter hours creative
after hours creative print + foil registration Because digital printing and foil blocking are different print processes, there is often movement between them, making tight registration problematic. Furthermore,
More information1 to to 30 R564,00 /
Contact 011 608 2118 0861 182 6826 Email info@printimpact.co.za sales@printimpact.co.za kgomotso@printimpact.co.za jason@printimpact.co.za Code Product Name Picture Size (mm) Description Print + System
More informationProudly serving you since 1976
DESIGN MANUFACTURE INSTALLATION SERVICE We care about your looks... Proudly serving you since 1976 Electronic Message Centres Adaptive Micro Systems is the largest technically advanced L.E.D (Light Emitting
More informationOVERVIEW OF SIGN BY-LAW HERITAGE GUIDELINES
OVERVIEW OF SIGN BY-LAW Formatted: Font: (Default) Arial, 12 pt & HERITAGE GUIDELINES Formatted: Font: 12 pt To regulate signage and all other advertising devices in the Town of Cobourg, Council approved
More informationThe Fyfe Building Instructions for Assembly of the N scale kit.
The Fyfe Building Instructions for Assembly of the N scale kit. Kit Contents: 150 each laser cut 1/16" acrylic parts. 6 each 020 adhesive backed part 6 each column caps 2 each decorative canopy 1 each.125"
More informationFrameless Inline Door QCI5254
INSTALLATION INSTRUCTIONS Frameless Inline Door QCI5254 FRAMELESS DOOR / PANEL QCI5254 REV. 0 Page 1 Cer fied 06/16/2016 Parts List with wall mount hinges *Quanes may vary QCI5254 REV. 0 Page 2 Cer fied
More information1/4 FRAMELESS SLIDING DOOR FOR TUB OR SHOWER 4400A-4500A
1/4 FRAMELESS SLIDING DOOR FOR TUB OR SHOWER 4400A-4500A F AB GLASS AND MIRROR www.fabglassandmirror.com Call: +1 888-474-2221 Fax: (614)-334-4919 Office Timing: 8:30-18:00 EST info@fabglassandmirror.com
More information