Finished Size 72"x 85" Jinglesflannels. Minick & Simpson

Size: px

Start display at page:

Download "Finished Size 72"x 85" Jinglesflannels. Minick & Simpson"

Todd Lawrence
6 years ago
Views:

1 Finished Size 72"x 85" Jinglesflannels Minick & Simpson

2 Jinglesflannels Minick & Simpson Fabric utting For blocks: from H of 4 reds cut: 5 5"x WOF subcut 9 5"x 22" strips from H of 2 golds cut: 3 5"x 22" strips from H of 4 backgrounds: 4 5 x WOF subcut 8 5 x 22 strips from H of 5 greens cut: 2 18"x WOF subcut 4 18"x 22" strips Quilter asics Please read all instructions before beginning. Label your cut pieces ll instructions use ¼" seam allowance. Press all seams toward dark fabric. Final order: ut 8 4½"x WOF strips inding: ut 8 2½ x WOF strips lock construction: 1 Use ¼" seams. Press seams in one direction. ombine 1 5"x 22" assorted red strip and 1 5"x 22" assorted background strip. See diagram. Press away from the background strips. Make 30 strip sets. ut into 5" wide units. Make 118 of Unit. ombine 1 5"x 22" assorted red strip and 1 5"x 22" assorted gold strip. See diagram. Press away from the gold strips. Make 6 strip sets. ut into 5" wide units. Make 24 of Unit. 5"x 22" assorted red strip 5"x 22" assorted background strip Press Unit Make 118 5"x 9½" 5"x 22" assorted red strip 5"x 22" assorted gold strip Press Unit Make 24 5"x 9½" 2 Sew strips together. Make 30 strip sets. ut into 5" wide units. Sew strips together. Make 6 strip sets. ut into 5" wide units. Sew 2 Unit s together. See diagram. Make 47 of Four Patch One. Sew 1 Unit and 1 Unit together. See diagram. Make 24 of Four Patch Two. Press Unit Unit Four Patch One Make 47 Unit Unit Four Patch Two Make 24 ombine. ombine.

3 3 The instructions that follow are for raw edge appliqué using lightweight paper backed fusible interfacing. Trace the rch template on the paper side of the fusible interfacing with a sharp pencil. Fuse paper side up to the wrong side of the green prints. Hint: ut the interfacing into 18"x 22" sections, trace the template then fuse to 18"x 22" sections of green fabric. ut out arches on the template lines. Make a total of 130 rches. rches Make 130 Trace rches on fusible interfacing. Fuse to green print and cut. Repeat to make 130 arches. 4 Repeat Step 4 to make the 7 block combinations asic block assembly: raw a small line (inside the ¼" seam allowance) 1½" on each side of the seams on the right side of the four patch block. Peel the paper away from the arch, align the arch to the block using the small lines, fuse in place. The number and position of the arches will vary with the block type. Using an open toe appliqué foot, a blanket stitch (a short stitch width and length) and 50 weight, 100-percent cotton thread in a matching color, stitch the arch to the four patch. These stitches cover the raw edge and prevent the fabric from fraying. Use the same color thread both on top and in the bobbin. lign to lines & arch lign to lines & arch Remember when stitching along a curve to pivot the piece frequently. blanket stitch looks the best when the straight stitch is on the four patch and the zigzag stitch goes into the appliqué at a right angle. Pivot the fabric piece when the needle is in a down position in the four patch. 5 locks and : Following the directions in Step #4, sew 2 arches to 23 Four Patch One blocks. See diagram. Set aside 15 blocks for lock. ut the remaining 8 blocks on the diagonal by aligning the ¼" line on your ruler to the block corners. Make 8 of lock. ppliqué 2 arches to Make 23 Set aside 15 for lock corner ¼" line lock Make 8

4 6 lock : Following the directions in Step #4, sew 2 arches to 15 Four Patch One blocks. See diagram. Make 15 blocks for lock. 9 lock : Following the directions in Step #4, sew 2 arches to 9 Four Patch Two blocks. See diagram. Make 9 blocks for lock. lock Make 15 lock Make 9 ppliqué 2 arches to ppliqué 2 arches to 7 lock : Following the directions in Step #4, sew 1 arch to 9 Four Patch One blocks. See diagram. ut the blocks on the diagonal by aligning the ¼" line on your ruler to the block corners. Make 9 of lock. 10 lock H: Following the directions in Step #4, sew 1 arch to 3 Four Patch Two blocks. See diagram. ut the blocks on the diagonal by aligning the ¼" line on your ruler to the block corners. Make 3 blocks for lock H. ppliqué 1 arch to ppliqué 1 arch to 8 lock Make 9 locks and F: Following the directions in Step #4, sew 2 arches to 12 Four Patch Two blocks. See diagram. Set aside 10 blocks for lock. ut the remaining 2 blocks on the diagonal by aligning the ¼" line on your ruler to the block corners. Make 2 of lock F. lock H Make 3 Jingles locks ppliqué 2 arches to one Four Patch Two Make 12 Set aside 10 for lock lock lock lock lock lock F Make 2 lock lock F lock lock H

5 ssemble the quilt Sew the 71 blocks into rows. See diagram for block placement. 11 Press in opposite directions. ombine the rows. H 71 locks are used in quilt top F lock...15 lock... 8 lock...15 lock... 9 lock...10 lock F... 2 lock... 9 lock H... 3 H H F 12 Join the 8 4½"x WOF final border strips. efore you add each border, measure across the center of the quilt for the best measurements for the length of the borders. dd the final borders, sides first then top and bottom. Finished Size: 72"x 85". 13 Join the 8 2½"x WOF binding strips. Layer, quilt, bind and NJOY!

ssorted ackgrounds ¾ yd of H Final order 1⅛ yards Light Weight Fusible Interfacing 22"x 10 yds Jingles rch template.

6 Jinglesflannels should measure 3" rch end. o not appliqué. Finished Size 72"x 85" SUPPLY LIST: 4 ssorted Reds ⅞ yd of H 5 ssorted reens 1⅛ yds of H 2 ssorted olds fat quarter of H 4 ssorted ackgrounds ¾ yd of H Final order 1⅛ yards Light Weight Fusible Interfacing 22"x 10 yds Jingles rch template. (ctual size. o not enlarge) Trace 117 on light weight fusible interfacing. inding acking ¾ yards 5 yards rch end. o not appliqué. should measure 3" by Minick & Simpson PS14630 SUST RTIL $2.00

Finished Size: 60 x70

Finished Size: 60 x70 Finished Size: 60" x 70" Finished Block Size: 10" x 10" Cutting Label pieces as they are cut Quilters Basics Read instructions before beginning a project. All instructions include